xref: /openbmc/linux/net/mac80211/iface.c (revision 9c1f8594)
1 /*
2  * Interface handling (except master interface)
3  *
4  * Copyright 2002-2005, Instant802 Networks, Inc.
5  * Copyright 2005-2006, Devicescape Software, Inc.
6  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
7  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/if_arp.h>
16 #include <linux/netdevice.h>
17 #include <linux/rtnetlink.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
20 #include "ieee80211_i.h"
21 #include "sta_info.h"
22 #include "debugfs_netdev.h"
23 #include "mesh.h"
24 #include "led.h"
25 #include "driver-ops.h"
26 #include "wme.h"
27 #include "rate.h"
28 
29 /**
30  * DOC: Interface list locking
31  *
32  * The interface list in each struct ieee80211_local is protected
33  * three-fold:
34  *
35  * (1) modifications may only be done under the RTNL
36  * (2) modifications and readers are protected against each other by
37  *     the iflist_mtx.
38  * (3) modifications are done in an RCU manner so atomic readers
39  *     can traverse the list in RCU-safe blocks.
40  *
41  * As a consequence, reads (traversals) of the list can be protected
42  * by either the RTNL, the iflist_mtx or RCU.
43  */
44 
45 
46 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
47 {
48 	int meshhdrlen;
49 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
50 
51 	meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
52 
53 	/* FIX: what would be proper limits for MTU?
54 	 * This interface uses 802.3 frames. */
55 	if (new_mtu < 256 ||
56 	    new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
57 		return -EINVAL;
58 	}
59 
60 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
61 	printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
62 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
63 	dev->mtu = new_mtu;
64 	return 0;
65 }
66 
67 static int ieee80211_change_mac(struct net_device *dev, void *addr)
68 {
69 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
70 	struct sockaddr *sa = addr;
71 	int ret;
72 
73 	if (ieee80211_sdata_running(sdata))
74 		return -EBUSY;
75 
76 	ret = eth_mac_addr(dev, sa);
77 
78 	if (ret == 0)
79 		memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
80 
81 	return ret;
82 }
83 
84 static inline int identical_mac_addr_allowed(int type1, int type2)
85 {
86 	return type1 == NL80211_IFTYPE_MONITOR ||
87 		type2 == NL80211_IFTYPE_MONITOR ||
88 		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
89 		(type1 == NL80211_IFTYPE_WDS &&
90 			(type2 == NL80211_IFTYPE_WDS ||
91 			 type2 == NL80211_IFTYPE_AP)) ||
92 		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
93 		(type1 == NL80211_IFTYPE_AP_VLAN &&
94 			(type2 == NL80211_IFTYPE_AP ||
95 			 type2 == NL80211_IFTYPE_AP_VLAN));
96 }
97 
98 static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
99 					    enum nl80211_iftype iftype)
100 {
101 	struct ieee80211_local *local = sdata->local;
102 	struct ieee80211_sub_if_data *nsdata;
103 	struct net_device *dev = sdata->dev;
104 
105 	ASSERT_RTNL();
106 
107 	/* we hold the RTNL here so can safely walk the list */
108 	list_for_each_entry(nsdata, &local->interfaces, list) {
109 		struct net_device *ndev = nsdata->dev;
110 
111 		if (ndev != dev && ieee80211_sdata_running(nsdata)) {
112 			/*
113 			 * Allow only a single IBSS interface to be up at any
114 			 * time. This is restricted because beacon distribution
115 			 * cannot work properly if both are in the same IBSS.
116 			 *
117 			 * To remove this restriction we'd have to disallow them
118 			 * from setting the same SSID on different IBSS interfaces
119 			 * belonging to the same hardware. Then, however, we're
120 			 * faced with having to adopt two different TSF timers...
121 			 */
122 			if (iftype == NL80211_IFTYPE_ADHOC &&
123 			    nsdata->vif.type == NL80211_IFTYPE_ADHOC)
124 				return -EBUSY;
125 
126 			/*
127 			 * The remaining checks are only performed for interfaces
128 			 * with the same MAC address.
129 			 */
130 			if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
131 				continue;
132 
133 			/*
134 			 * check whether it may have the same address
135 			 */
136 			if (!identical_mac_addr_allowed(iftype,
137 							nsdata->vif.type))
138 				return -ENOTUNIQ;
139 
140 			/*
141 			 * can only add VLANs to enabled APs
142 			 */
143 			if (iftype == NL80211_IFTYPE_AP_VLAN &&
144 			    nsdata->vif.type == NL80211_IFTYPE_AP)
145 				sdata->bss = &nsdata->u.ap;
146 		}
147 	}
148 
149 	return 0;
150 }
151 
152 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
153 				    const int offset)
154 {
155 	struct ieee80211_local *local = sdata->local;
156 	u32 flags = sdata->u.mntr_flags;
157 
158 #define ADJUST(_f, _s)	do {					\
159 	if (flags & MONITOR_FLAG_##_f)				\
160 		local->fif_##_s += offset;			\
161 	} while (0)
162 
163 	ADJUST(FCSFAIL, fcsfail);
164 	ADJUST(PLCPFAIL, plcpfail);
165 	ADJUST(CONTROL, control);
166 	ADJUST(CONTROL, pspoll);
167 	ADJUST(OTHER_BSS, other_bss);
168 
169 #undef ADJUST
170 }
171 
172 /*
173  * NOTE: Be very careful when changing this function, it must NOT return
174  * an error on interface type changes that have been pre-checked, so most
175  * checks should be in ieee80211_check_concurrent_iface.
176  */
177 static int ieee80211_do_open(struct net_device *dev, bool coming_up)
178 {
179 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
180 	struct ieee80211_local *local = sdata->local;
181 	struct sta_info *sta;
182 	u32 changed = 0;
183 	int res;
184 	u32 hw_reconf_flags = 0;
185 
186 	switch (sdata->vif.type) {
187 	case NL80211_IFTYPE_WDS:
188 		if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
189 			return -ENOLINK;
190 		break;
191 	case NL80211_IFTYPE_AP_VLAN:
192 		if (!sdata->bss)
193 			return -ENOLINK;
194 		list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
195 		break;
196 	case NL80211_IFTYPE_AP:
197 		sdata->bss = &sdata->u.ap;
198 		break;
199 	case NL80211_IFTYPE_MESH_POINT:
200 	case NL80211_IFTYPE_STATION:
201 	case NL80211_IFTYPE_MONITOR:
202 	case NL80211_IFTYPE_ADHOC:
203 		/* no special treatment */
204 		break;
205 	case NL80211_IFTYPE_UNSPECIFIED:
206 	case NUM_NL80211_IFTYPES:
207 	case NL80211_IFTYPE_P2P_CLIENT:
208 	case NL80211_IFTYPE_P2P_GO:
209 		/* cannot happen */
210 		WARN_ON(1);
211 		break;
212 	}
213 
214 	if (local->open_count == 0) {
215 		res = drv_start(local);
216 		if (res)
217 			goto err_del_bss;
218 		if (local->ops->napi_poll)
219 			napi_enable(&local->napi);
220 		/* we're brought up, everything changes */
221 		hw_reconf_flags = ~0;
222 		ieee80211_led_radio(local, true);
223 		ieee80211_mod_tpt_led_trig(local,
224 					   IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
225 	}
226 
227 	/*
228 	 * Copy the hopefully now-present MAC address to
229 	 * this interface, if it has the special null one.
230 	 */
231 	if (is_zero_ether_addr(dev->dev_addr)) {
232 		memcpy(dev->dev_addr,
233 		       local->hw.wiphy->perm_addr,
234 		       ETH_ALEN);
235 		memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
236 
237 		if (!is_valid_ether_addr(dev->dev_addr)) {
238 			if (!local->open_count)
239 				drv_stop(local);
240 			return -EADDRNOTAVAIL;
241 		}
242 	}
243 
244 	switch (sdata->vif.type) {
245 	case NL80211_IFTYPE_AP_VLAN:
246 		/* no need to tell driver */
247 		break;
248 	case NL80211_IFTYPE_MONITOR:
249 		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
250 			local->cooked_mntrs++;
251 			break;
252 		}
253 
254 		/* must be before the call to ieee80211_configure_filter */
255 		local->monitors++;
256 		if (local->monitors == 1) {
257 			local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
258 			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
259 		}
260 
261 		ieee80211_adjust_monitor_flags(sdata, 1);
262 		ieee80211_configure_filter(local);
263 
264 		netif_carrier_on(dev);
265 		break;
266 	default:
267 		if (coming_up) {
268 			res = drv_add_interface(local, &sdata->vif);
269 			if (res)
270 				goto err_stop;
271 		}
272 
273 		if (sdata->vif.type == NL80211_IFTYPE_AP) {
274 			local->fif_pspoll++;
275 			local->fif_probe_req++;
276 
277 			ieee80211_configure_filter(local);
278 		} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
279 			local->fif_probe_req++;
280 		}
281 
282 		changed |= ieee80211_reset_erp_info(sdata);
283 		ieee80211_bss_info_change_notify(sdata, changed);
284 
285 		if (sdata->vif.type == NL80211_IFTYPE_STATION)
286 			netif_carrier_off(dev);
287 		else
288 			netif_carrier_on(dev);
289 	}
290 
291 	set_bit(SDATA_STATE_RUNNING, &sdata->state);
292 
293 	if (sdata->vif.type == NL80211_IFTYPE_WDS) {
294 		/* Create STA entry for the WDS peer */
295 		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
296 				     GFP_KERNEL);
297 		if (!sta) {
298 			res = -ENOMEM;
299 			goto err_del_interface;
300 		}
301 
302 		/* no locking required since STA is not live yet */
303 		sta->flags |= WLAN_STA_AUTHORIZED;
304 
305 		res = sta_info_insert(sta);
306 		if (res) {
307 			/* STA has been freed */
308 			goto err_del_interface;
309 		}
310 
311 		rate_control_rate_init(sta);
312 	}
313 
314 	/*
315 	 * set_multicast_list will be invoked by the networking core
316 	 * which will check whether any increments here were done in
317 	 * error and sync them down to the hardware as filter flags.
318 	 */
319 	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
320 		atomic_inc(&local->iff_allmultis);
321 
322 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
323 		atomic_inc(&local->iff_promiscs);
324 
325 	mutex_lock(&local->mtx);
326 	hw_reconf_flags |= __ieee80211_recalc_idle(local);
327 	mutex_unlock(&local->mtx);
328 
329 	if (coming_up)
330 		local->open_count++;
331 
332 	if (hw_reconf_flags) {
333 		ieee80211_hw_config(local, hw_reconf_flags);
334 		/*
335 		 * set default queue parameters so drivers don't
336 		 * need to initialise the hardware if the hardware
337 		 * doesn't start up with sane defaults
338 		 */
339 		ieee80211_set_wmm_default(sdata);
340 	}
341 
342 	ieee80211_recalc_ps(local, -1);
343 
344 	netif_tx_start_all_queues(dev);
345 
346 	return 0;
347  err_del_interface:
348 	drv_remove_interface(local, &sdata->vif);
349  err_stop:
350 	if (!local->open_count)
351 		drv_stop(local);
352  err_del_bss:
353 	sdata->bss = NULL;
354 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
355 		list_del(&sdata->u.vlan.list);
356 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
357 	return res;
358 }
359 
360 static int ieee80211_open(struct net_device *dev)
361 {
362 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
363 	int err;
364 
365 	/* fail early if user set an invalid address */
366 	if (!is_valid_ether_addr(dev->dev_addr))
367 		return -EADDRNOTAVAIL;
368 
369 	err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
370 	if (err)
371 		return err;
372 
373 	return ieee80211_do_open(dev, true);
374 }
375 
376 static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
377 			      bool going_down)
378 {
379 	struct ieee80211_local *local = sdata->local;
380 	unsigned long flags;
381 	struct sk_buff *skb, *tmp;
382 	u32 hw_reconf_flags = 0;
383 	int i;
384 	enum nl80211_channel_type orig_ct;
385 
386 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
387 
388 	if (local->scan_sdata == sdata)
389 		ieee80211_scan_cancel(local);
390 
391 	/*
392 	 * Stop TX on this interface first.
393 	 */
394 	netif_tx_stop_all_queues(sdata->dev);
395 
396 	/*
397 	 * Purge work for this interface.
398 	 */
399 	ieee80211_work_purge(sdata);
400 
401 	/*
402 	 * Remove all stations associated with this interface.
403 	 *
404 	 * This must be done before calling ops->remove_interface()
405 	 * because otherwise we can later invoke ops->sta_notify()
406 	 * whenever the STAs are removed, and that invalidates driver
407 	 * assumptions about always getting a vif pointer that is valid
408 	 * (because if we remove a STA after ops->remove_interface()
409 	 * the driver will have removed the vif info already!)
410 	 *
411 	 * This is relevant only in AP, WDS and mesh modes, since in
412 	 * all other modes we've already removed all stations when
413 	 * disconnecting etc.
414 	 */
415 	sta_info_flush(local, sdata);
416 
417 	/*
418 	 * Don't count this interface for promisc/allmulti while it
419 	 * is down. dev_mc_unsync() will invoke set_multicast_list
420 	 * on the master interface which will sync these down to the
421 	 * hardware as filter flags.
422 	 */
423 	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
424 		atomic_dec(&local->iff_allmultis);
425 
426 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
427 		atomic_dec(&local->iff_promiscs);
428 
429 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
430 		local->fif_pspoll--;
431 		local->fif_probe_req--;
432 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
433 		local->fif_probe_req--;
434 	}
435 
436 	netif_addr_lock_bh(sdata->dev);
437 	spin_lock_bh(&local->filter_lock);
438 	__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
439 			 sdata->dev->addr_len);
440 	spin_unlock_bh(&local->filter_lock);
441 	netif_addr_unlock_bh(sdata->dev);
442 
443 	ieee80211_configure_filter(local);
444 
445 	del_timer_sync(&local->dynamic_ps_timer);
446 	cancel_work_sync(&local->dynamic_ps_enable_work);
447 
448 	/* APs need special treatment */
449 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
450 		struct ieee80211_sub_if_data *vlan, *tmpsdata;
451 		struct beacon_data *old_beacon =
452 			rtnl_dereference(sdata->u.ap.beacon);
453 
454 		/* sdata_running will return false, so this will disable */
455 		ieee80211_bss_info_change_notify(sdata,
456 						 BSS_CHANGED_BEACON_ENABLED);
457 
458 		/* remove beacon */
459 		rcu_assign_pointer(sdata->u.ap.beacon, NULL);
460 		synchronize_rcu();
461 		kfree(old_beacon);
462 
463 		/* free all potentially still buffered bcast frames */
464 		while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
465 			local->total_ps_buffered--;
466 			dev_kfree_skb(skb);
467 		}
468 
469 		/* down all dependent devices, that is VLANs */
470 		list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
471 					 u.vlan.list)
472 			dev_close(vlan->dev);
473 		WARN_ON(!list_empty(&sdata->u.ap.vlans));
474 	}
475 
476 	if (going_down)
477 		local->open_count--;
478 
479 	switch (sdata->vif.type) {
480 	case NL80211_IFTYPE_AP_VLAN:
481 		list_del(&sdata->u.vlan.list);
482 		/* no need to tell driver */
483 		break;
484 	case NL80211_IFTYPE_MONITOR:
485 		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
486 			local->cooked_mntrs--;
487 			break;
488 		}
489 
490 		local->monitors--;
491 		if (local->monitors == 0) {
492 			local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
493 			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
494 		}
495 
496 		ieee80211_adjust_monitor_flags(sdata, -1);
497 		ieee80211_configure_filter(local);
498 		break;
499 	default:
500 		flush_work(&sdata->work);
501 		/*
502 		 * When we get here, the interface is marked down.
503 		 * Call synchronize_rcu() to wait for the RX path
504 		 * should it be using the interface and enqueuing
505 		 * frames at this very time on another CPU.
506 		 */
507 		synchronize_rcu();
508 		skb_queue_purge(&sdata->skb_queue);
509 
510 		/*
511 		 * Disable beaconing here for mesh only, AP and IBSS
512 		 * are already taken care of.
513 		 */
514 		if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
515 			ieee80211_bss_info_change_notify(sdata,
516 				BSS_CHANGED_BEACON_ENABLED);
517 
518 		/*
519 		 * Free all remaining keys, there shouldn't be any,
520 		 * except maybe group keys in AP more or WDS?
521 		 */
522 		ieee80211_free_keys(sdata);
523 
524 		if (going_down)
525 			drv_remove_interface(local, &sdata->vif);
526 	}
527 
528 	sdata->bss = NULL;
529 
530 	mutex_lock(&local->mtx);
531 	hw_reconf_flags |= __ieee80211_recalc_idle(local);
532 	mutex_unlock(&local->mtx);
533 
534 	ieee80211_recalc_ps(local, -1);
535 
536 	if (local->open_count == 0) {
537 		if (local->ops->napi_poll)
538 			napi_disable(&local->napi);
539 		ieee80211_clear_tx_pending(local);
540 		ieee80211_stop_device(local);
541 
542 		/* no reconfiguring after stop! */
543 		hw_reconf_flags = 0;
544 	}
545 
546 	/* Re-calculate channel-type, in case there are multiple vifs
547 	 * on different channel types.
548 	 */
549 	orig_ct = local->_oper_channel_type;
550 	ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT);
551 
552 	/* do after stop to avoid reconfiguring when we stop anyway */
553 	if (hw_reconf_flags || (orig_ct != local->_oper_channel_type))
554 		ieee80211_hw_config(local, hw_reconf_flags);
555 
556 	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
557 	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
558 		skb_queue_walk_safe(&local->pending[i], skb, tmp) {
559 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
560 			if (info->control.vif == &sdata->vif) {
561 				__skb_unlink(skb, &local->pending[i]);
562 				dev_kfree_skb_irq(skb);
563 			}
564 		}
565 	}
566 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
567 }
568 
569 static int ieee80211_stop(struct net_device *dev)
570 {
571 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
572 
573 	ieee80211_do_stop(sdata, true);
574 
575 	return 0;
576 }
577 
578 static void ieee80211_set_multicast_list(struct net_device *dev)
579 {
580 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
581 	struct ieee80211_local *local = sdata->local;
582 	int allmulti, promisc, sdata_allmulti, sdata_promisc;
583 
584 	allmulti = !!(dev->flags & IFF_ALLMULTI);
585 	promisc = !!(dev->flags & IFF_PROMISC);
586 	sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
587 	sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
588 
589 	if (allmulti != sdata_allmulti) {
590 		if (dev->flags & IFF_ALLMULTI)
591 			atomic_inc(&local->iff_allmultis);
592 		else
593 			atomic_dec(&local->iff_allmultis);
594 		sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
595 	}
596 
597 	if (promisc != sdata_promisc) {
598 		if (dev->flags & IFF_PROMISC)
599 			atomic_inc(&local->iff_promiscs);
600 		else
601 			atomic_dec(&local->iff_promiscs);
602 		sdata->flags ^= IEEE80211_SDATA_PROMISC;
603 	}
604 	spin_lock_bh(&local->filter_lock);
605 	__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
606 	spin_unlock_bh(&local->filter_lock);
607 	ieee80211_queue_work(&local->hw, &local->reconfig_filter);
608 }
609 
610 /*
611  * Called when the netdev is removed or, by the code below, before
612  * the interface type changes.
613  */
614 static void ieee80211_teardown_sdata(struct net_device *dev)
615 {
616 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
617 	struct ieee80211_local *local = sdata->local;
618 	int flushed;
619 	int i;
620 
621 	/* free extra data */
622 	ieee80211_free_keys(sdata);
623 
624 	ieee80211_debugfs_remove_netdev(sdata);
625 
626 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
627 		__skb_queue_purge(&sdata->fragments[i].skb_list);
628 	sdata->fragment_next = 0;
629 
630 	if (ieee80211_vif_is_mesh(&sdata->vif))
631 		mesh_rmc_free(sdata);
632 
633 	flushed = sta_info_flush(local, sdata);
634 	WARN_ON(flushed);
635 }
636 
637 static u16 ieee80211_netdev_select_queue(struct net_device *dev,
638 					 struct sk_buff *skb)
639 {
640 	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
641 }
642 
643 static const struct net_device_ops ieee80211_dataif_ops = {
644 	.ndo_open		= ieee80211_open,
645 	.ndo_stop		= ieee80211_stop,
646 	.ndo_uninit		= ieee80211_teardown_sdata,
647 	.ndo_start_xmit		= ieee80211_subif_start_xmit,
648 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
649 	.ndo_change_mtu 	= ieee80211_change_mtu,
650 	.ndo_set_mac_address 	= ieee80211_change_mac,
651 	.ndo_select_queue	= ieee80211_netdev_select_queue,
652 };
653 
654 static u16 ieee80211_monitor_select_queue(struct net_device *dev,
655 					  struct sk_buff *skb)
656 {
657 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
658 	struct ieee80211_local *local = sdata->local;
659 	struct ieee80211_hdr *hdr;
660 	struct ieee80211_radiotap_header *rtap = (void *)skb->data;
661 	u8 *p;
662 
663 	if (local->hw.queues < 4)
664 		return 0;
665 
666 	if (skb->len < 4 ||
667 	    skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
668 		return 0; /* doesn't matter, frame will be dropped */
669 
670 	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
671 
672 	if (!ieee80211_is_data(hdr->frame_control)) {
673 		skb->priority = 7;
674 		return ieee802_1d_to_ac[skb->priority];
675 	}
676 	if (!ieee80211_is_data_qos(hdr->frame_control)) {
677 		skb->priority = 0;
678 		return ieee802_1d_to_ac[skb->priority];
679 	}
680 
681 	p = ieee80211_get_qos_ctl(hdr);
682 	skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
683 
684 	return ieee80211_downgrade_queue(local, skb);
685 }
686 
687 static const struct net_device_ops ieee80211_monitorif_ops = {
688 	.ndo_open		= ieee80211_open,
689 	.ndo_stop		= ieee80211_stop,
690 	.ndo_uninit		= ieee80211_teardown_sdata,
691 	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
692 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
693 	.ndo_change_mtu 	= ieee80211_change_mtu,
694 	.ndo_set_mac_address 	= eth_mac_addr,
695 	.ndo_select_queue	= ieee80211_monitor_select_queue,
696 };
697 
698 static void ieee80211_if_setup(struct net_device *dev)
699 {
700 	ether_setup(dev);
701 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
702 	dev->netdev_ops = &ieee80211_dataif_ops;
703 	dev->destructor = free_netdev;
704 }
705 
706 static void ieee80211_iface_work(struct work_struct *work)
707 {
708 	struct ieee80211_sub_if_data *sdata =
709 		container_of(work, struct ieee80211_sub_if_data, work);
710 	struct ieee80211_local *local = sdata->local;
711 	struct sk_buff *skb;
712 	struct sta_info *sta;
713 	struct ieee80211_ra_tid *ra_tid;
714 
715 	if (!ieee80211_sdata_running(sdata))
716 		return;
717 
718 	if (local->scanning)
719 		return;
720 
721 	/*
722 	 * ieee80211_queue_work() should have picked up most cases,
723 	 * here we'll pick the rest.
724 	 */
725 	if (WARN(local->suspended,
726 		 "interface work scheduled while going to suspend\n"))
727 		return;
728 
729 	/* first process frames */
730 	while ((skb = skb_dequeue(&sdata->skb_queue))) {
731 		struct ieee80211_mgmt *mgmt = (void *)skb->data;
732 
733 		if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
734 			ra_tid = (void *)&skb->cb;
735 			ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
736 						 ra_tid->tid);
737 		} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
738 			ra_tid = (void *)&skb->cb;
739 			ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
740 						ra_tid->tid);
741 		} else if (ieee80211_is_action(mgmt->frame_control) &&
742 			   mgmt->u.action.category == WLAN_CATEGORY_BACK) {
743 			int len = skb->len;
744 
745 			mutex_lock(&local->sta_mtx);
746 			sta = sta_info_get_bss(sdata, mgmt->sa);
747 			if (sta) {
748 				switch (mgmt->u.action.u.addba_req.action_code) {
749 				case WLAN_ACTION_ADDBA_REQ:
750 					ieee80211_process_addba_request(
751 							local, sta, mgmt, len);
752 					break;
753 				case WLAN_ACTION_ADDBA_RESP:
754 					ieee80211_process_addba_resp(local, sta,
755 								     mgmt, len);
756 					break;
757 				case WLAN_ACTION_DELBA:
758 					ieee80211_process_delba(sdata, sta,
759 								mgmt, len);
760 					break;
761 				default:
762 					WARN_ON(1);
763 					break;
764 				}
765 			}
766 			mutex_unlock(&local->sta_mtx);
767 		} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
768 			struct ieee80211_hdr *hdr = (void *)mgmt;
769 			/*
770 			 * So the frame isn't mgmt, but frame_control
771 			 * is at the right place anyway, of course, so
772 			 * the if statement is correct.
773 			 *
774 			 * Warn if we have other data frame types here,
775 			 * they must not get here.
776 			 */
777 			WARN_ON(hdr->frame_control &
778 					cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
779 			WARN_ON(!(hdr->seq_ctrl &
780 					cpu_to_le16(IEEE80211_SCTL_FRAG)));
781 			/*
782 			 * This was a fragment of a frame, received while
783 			 * a block-ack session was active. That cannot be
784 			 * right, so terminate the session.
785 			 */
786 			mutex_lock(&local->sta_mtx);
787 			sta = sta_info_get_bss(sdata, mgmt->sa);
788 			if (sta) {
789 				u16 tid = *ieee80211_get_qos_ctl(hdr) &
790 						IEEE80211_QOS_CTL_TID_MASK;
791 
792 				__ieee80211_stop_rx_ba_session(
793 					sta, tid, WLAN_BACK_RECIPIENT,
794 					WLAN_REASON_QSTA_REQUIRE_SETUP,
795 					true);
796 			}
797 			mutex_unlock(&local->sta_mtx);
798 		} else switch (sdata->vif.type) {
799 		case NL80211_IFTYPE_STATION:
800 			ieee80211_sta_rx_queued_mgmt(sdata, skb);
801 			break;
802 		case NL80211_IFTYPE_ADHOC:
803 			ieee80211_ibss_rx_queued_mgmt(sdata, skb);
804 			break;
805 		case NL80211_IFTYPE_MESH_POINT:
806 			if (!ieee80211_vif_is_mesh(&sdata->vif))
807 				break;
808 			ieee80211_mesh_rx_queued_mgmt(sdata, skb);
809 			break;
810 		default:
811 			WARN(1, "frame for unexpected interface type");
812 			break;
813 		}
814 
815 		kfree_skb(skb);
816 	}
817 
818 	/* then other type-dependent work */
819 	switch (sdata->vif.type) {
820 	case NL80211_IFTYPE_STATION:
821 		ieee80211_sta_work(sdata);
822 		break;
823 	case NL80211_IFTYPE_ADHOC:
824 		ieee80211_ibss_work(sdata);
825 		break;
826 	case NL80211_IFTYPE_MESH_POINT:
827 		if (!ieee80211_vif_is_mesh(&sdata->vif))
828 			break;
829 		ieee80211_mesh_work(sdata);
830 		break;
831 	default:
832 		break;
833 	}
834 }
835 
836 
837 /*
838  * Helper function to initialise an interface to a specific type.
839  */
840 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
841 				  enum nl80211_iftype type)
842 {
843 	/* clear type-dependent union */
844 	memset(&sdata->u, 0, sizeof(sdata->u));
845 
846 	/* and set some type-dependent values */
847 	sdata->vif.type = type;
848 	sdata->vif.p2p = false;
849 	sdata->dev->netdev_ops = &ieee80211_dataif_ops;
850 	sdata->wdev.iftype = type;
851 
852 	sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
853 	sdata->control_port_no_encrypt = false;
854 
855 	/* only monitor differs */
856 	sdata->dev->type = ARPHRD_ETHER;
857 
858 	skb_queue_head_init(&sdata->skb_queue);
859 	INIT_WORK(&sdata->work, ieee80211_iface_work);
860 
861 	switch (type) {
862 	case NL80211_IFTYPE_P2P_GO:
863 		type = NL80211_IFTYPE_AP;
864 		sdata->vif.type = type;
865 		sdata->vif.p2p = true;
866 		/* fall through */
867 	case NL80211_IFTYPE_AP:
868 		skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
869 		INIT_LIST_HEAD(&sdata->u.ap.vlans);
870 		break;
871 	case NL80211_IFTYPE_P2P_CLIENT:
872 		type = NL80211_IFTYPE_STATION;
873 		sdata->vif.type = type;
874 		sdata->vif.p2p = true;
875 		/* fall through */
876 	case NL80211_IFTYPE_STATION:
877 		ieee80211_sta_setup_sdata(sdata);
878 		break;
879 	case NL80211_IFTYPE_ADHOC:
880 		ieee80211_ibss_setup_sdata(sdata);
881 		break;
882 	case NL80211_IFTYPE_MESH_POINT:
883 		if (ieee80211_vif_is_mesh(&sdata->vif))
884 			ieee80211_mesh_init_sdata(sdata);
885 		break;
886 	case NL80211_IFTYPE_MONITOR:
887 		sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
888 		sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
889 		sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
890 				      MONITOR_FLAG_OTHER_BSS;
891 		break;
892 	case NL80211_IFTYPE_WDS:
893 	case NL80211_IFTYPE_AP_VLAN:
894 		break;
895 	case NL80211_IFTYPE_UNSPECIFIED:
896 	case NUM_NL80211_IFTYPES:
897 		BUG();
898 		break;
899 	}
900 
901 	ieee80211_debugfs_add_netdev(sdata);
902 }
903 
904 static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
905 					   enum nl80211_iftype type)
906 {
907 	struct ieee80211_local *local = sdata->local;
908 	int ret, err;
909 	enum nl80211_iftype internal_type = type;
910 	bool p2p = false;
911 
912 	ASSERT_RTNL();
913 
914 	if (!local->ops->change_interface)
915 		return -EBUSY;
916 
917 	switch (sdata->vif.type) {
918 	case NL80211_IFTYPE_AP:
919 	case NL80211_IFTYPE_STATION:
920 	case NL80211_IFTYPE_ADHOC:
921 		/*
922 		 * Could maybe also all others here?
923 		 * Just not sure how that interacts
924 		 * with the RX/config path e.g. for
925 		 * mesh.
926 		 */
927 		break;
928 	default:
929 		return -EBUSY;
930 	}
931 
932 	switch (type) {
933 	case NL80211_IFTYPE_AP:
934 	case NL80211_IFTYPE_STATION:
935 	case NL80211_IFTYPE_ADHOC:
936 		/*
937 		 * Could probably support everything
938 		 * but WDS here (WDS do_open can fail
939 		 * under memory pressure, which this
940 		 * code isn't prepared to handle).
941 		 */
942 		break;
943 	case NL80211_IFTYPE_P2P_CLIENT:
944 		p2p = true;
945 		internal_type = NL80211_IFTYPE_STATION;
946 		break;
947 	case NL80211_IFTYPE_P2P_GO:
948 		p2p = true;
949 		internal_type = NL80211_IFTYPE_AP;
950 		break;
951 	default:
952 		return -EBUSY;
953 	}
954 
955 	ret = ieee80211_check_concurrent_iface(sdata, internal_type);
956 	if (ret)
957 		return ret;
958 
959 	ieee80211_do_stop(sdata, false);
960 
961 	ieee80211_teardown_sdata(sdata->dev);
962 
963 	ret = drv_change_interface(local, sdata, internal_type, p2p);
964 	if (ret)
965 		type = sdata->vif.type;
966 
967 	ieee80211_setup_sdata(sdata, type);
968 
969 	err = ieee80211_do_open(sdata->dev, false);
970 	WARN(err, "type change: do_open returned %d", err);
971 
972 	return ret;
973 }
974 
975 int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
976 			     enum nl80211_iftype type)
977 {
978 	int ret;
979 
980 	ASSERT_RTNL();
981 
982 	if (type == ieee80211_vif_type_p2p(&sdata->vif))
983 		return 0;
984 
985 	/* Setting ad-hoc mode on non-IBSS channel is not supported. */
986 	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
987 	    type == NL80211_IFTYPE_ADHOC)
988 		return -EOPNOTSUPP;
989 
990 	if (ieee80211_sdata_running(sdata)) {
991 		ret = ieee80211_runtime_change_iftype(sdata, type);
992 		if (ret)
993 			return ret;
994 	} else {
995 		/* Purge and reset type-dependent state. */
996 		ieee80211_teardown_sdata(sdata->dev);
997 		ieee80211_setup_sdata(sdata, type);
998 	}
999 
1000 	/* reset some values that shouldn't be kept across type changes */
1001 	sdata->vif.bss_conf.basic_rates =
1002 		ieee80211_mandatory_rates(sdata->local,
1003 			sdata->local->hw.conf.channel->band);
1004 	sdata->drop_unencrypted = 0;
1005 	if (type == NL80211_IFTYPE_STATION)
1006 		sdata->u.mgd.use_4addr = false;
1007 
1008 	return 0;
1009 }
1010 
1011 static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
1012 				       struct net_device *dev,
1013 				       enum nl80211_iftype type)
1014 {
1015 	struct ieee80211_sub_if_data *sdata;
1016 	u64 mask, start, addr, val, inc;
1017 	u8 *m;
1018 	u8 tmp_addr[ETH_ALEN];
1019 	int i;
1020 
1021 	/* default ... something at least */
1022 	memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
1023 
1024 	if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
1025 	    local->hw.wiphy->n_addresses <= 1)
1026 		return;
1027 
1028 
1029 	mutex_lock(&local->iflist_mtx);
1030 
1031 	switch (type) {
1032 	case NL80211_IFTYPE_MONITOR:
1033 		/* doesn't matter */
1034 		break;
1035 	case NL80211_IFTYPE_WDS:
1036 	case NL80211_IFTYPE_AP_VLAN:
1037 		/* match up with an AP interface */
1038 		list_for_each_entry(sdata, &local->interfaces, list) {
1039 			if (sdata->vif.type != NL80211_IFTYPE_AP)
1040 				continue;
1041 			memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
1042 			break;
1043 		}
1044 		/* keep default if no AP interface present */
1045 		break;
1046 	default:
1047 		/* assign a new address if possible -- try n_addresses first */
1048 		for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
1049 			bool used = false;
1050 
1051 			list_for_each_entry(sdata, &local->interfaces, list) {
1052 				if (memcmp(local->hw.wiphy->addresses[i].addr,
1053 					   sdata->vif.addr, ETH_ALEN) == 0) {
1054 					used = true;
1055 					break;
1056 				}
1057 			}
1058 
1059 			if (!used) {
1060 				memcpy(dev->perm_addr,
1061 				       local->hw.wiphy->addresses[i].addr,
1062 				       ETH_ALEN);
1063 				break;
1064 			}
1065 		}
1066 
1067 		/* try mask if available */
1068 		if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
1069 			break;
1070 
1071 		m = local->hw.wiphy->addr_mask;
1072 		mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1073 			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1074 			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1075 
1076 		if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
1077 			/* not a contiguous mask ... not handled now! */
1078 			printk(KERN_DEBUG "not contiguous\n");
1079 			break;
1080 		}
1081 
1082 		m = local->hw.wiphy->perm_addr;
1083 		start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1084 			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1085 			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1086 
1087 		inc = 1ULL<<__ffs64(mask);
1088 		val = (start & mask);
1089 		addr = (start & ~mask) | (val & mask);
1090 		do {
1091 			bool used = false;
1092 
1093 			tmp_addr[5] = addr >> 0*8;
1094 			tmp_addr[4] = addr >> 1*8;
1095 			tmp_addr[3] = addr >> 2*8;
1096 			tmp_addr[2] = addr >> 3*8;
1097 			tmp_addr[1] = addr >> 4*8;
1098 			tmp_addr[0] = addr >> 5*8;
1099 
1100 			val += inc;
1101 
1102 			list_for_each_entry(sdata, &local->interfaces, list) {
1103 				if (memcmp(tmp_addr, sdata->vif.addr,
1104 							ETH_ALEN) == 0) {
1105 					used = true;
1106 					break;
1107 				}
1108 			}
1109 
1110 			if (!used) {
1111 				memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
1112 				break;
1113 			}
1114 			addr = (start & ~mask) | (val & mask);
1115 		} while (addr != start);
1116 
1117 		break;
1118 	}
1119 
1120 	mutex_unlock(&local->iflist_mtx);
1121 }
1122 
1123 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
1124 		     struct net_device **new_dev, enum nl80211_iftype type,
1125 		     struct vif_params *params)
1126 {
1127 	struct net_device *ndev;
1128 	struct ieee80211_sub_if_data *sdata = NULL;
1129 	int ret, i;
1130 
1131 	ASSERT_RTNL();
1132 
1133 	ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
1134 				name, ieee80211_if_setup, local->hw.queues, 1);
1135 	if (!ndev)
1136 		return -ENOMEM;
1137 	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
1138 
1139 	ndev->needed_headroom = local->tx_headroom +
1140 				4*6 /* four MAC addresses */
1141 				+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
1142 				+ 6 /* mesh */
1143 				+ 8 /* rfc1042/bridge tunnel */
1144 				- ETH_HLEN /* ethernet hard_header_len */
1145 				+ IEEE80211_ENCRYPT_HEADROOM;
1146 	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
1147 
1148 	ret = dev_alloc_name(ndev, ndev->name);
1149 	if (ret < 0)
1150 		goto fail;
1151 
1152 	ieee80211_assign_perm_addr(local, ndev, type);
1153 	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
1154 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
1155 
1156 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
1157 	sdata = netdev_priv(ndev);
1158 	ndev->ieee80211_ptr = &sdata->wdev;
1159 	memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
1160 	memcpy(sdata->name, ndev->name, IFNAMSIZ);
1161 
1162 	/* initialise type-independent data */
1163 	sdata->wdev.wiphy = local->hw.wiphy;
1164 	sdata->local = local;
1165 	sdata->dev = ndev;
1166 #ifdef CONFIG_INET
1167 	sdata->arp_filter_state = true;
1168 #endif
1169 
1170 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
1171 		skb_queue_head_init(&sdata->fragments[i].skb_list);
1172 
1173 	INIT_LIST_HEAD(&sdata->key_list);
1174 
1175 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
1176 		struct ieee80211_supported_band *sband;
1177 		sband = local->hw.wiphy->bands[i];
1178 		sdata->rc_rateidx_mask[i] =
1179 			sband ? (1 << sband->n_bitrates) - 1 : 0;
1180 	}
1181 
1182 	/* setup type-dependent data */
1183 	ieee80211_setup_sdata(sdata, type);
1184 
1185 	if (params) {
1186 		ndev->ieee80211_ptr->use_4addr = params->use_4addr;
1187 		if (type == NL80211_IFTYPE_STATION)
1188 			sdata->u.mgd.use_4addr = params->use_4addr;
1189 	}
1190 
1191 	ret = register_netdevice(ndev);
1192 	if (ret)
1193 		goto fail;
1194 
1195 	mutex_lock(&local->iflist_mtx);
1196 	list_add_tail_rcu(&sdata->list, &local->interfaces);
1197 	mutex_unlock(&local->iflist_mtx);
1198 
1199 	if (new_dev)
1200 		*new_dev = ndev;
1201 
1202 	return 0;
1203 
1204  fail:
1205 	free_netdev(ndev);
1206 	return ret;
1207 }
1208 
1209 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
1210 {
1211 	ASSERT_RTNL();
1212 
1213 	mutex_lock(&sdata->local->iflist_mtx);
1214 	list_del_rcu(&sdata->list);
1215 	mutex_unlock(&sdata->local->iflist_mtx);
1216 
1217 	synchronize_rcu();
1218 	unregister_netdevice(sdata->dev);
1219 }
1220 
1221 /*
1222  * Remove all interfaces, may only be called at hardware unregistration
1223  * time because it doesn't do RCU-safe list removals.
1224  */
1225 void ieee80211_remove_interfaces(struct ieee80211_local *local)
1226 {
1227 	struct ieee80211_sub_if_data *sdata, *tmp;
1228 	LIST_HEAD(unreg_list);
1229 
1230 	ASSERT_RTNL();
1231 
1232 	mutex_lock(&local->iflist_mtx);
1233 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
1234 		list_del(&sdata->list);
1235 
1236 		unregister_netdevice_queue(sdata->dev, &unreg_list);
1237 	}
1238 	mutex_unlock(&local->iflist_mtx);
1239 	unregister_netdevice_many(&unreg_list);
1240 	list_del(&unreg_list);
1241 }
1242 
1243 static u32 ieee80211_idle_off(struct ieee80211_local *local,
1244 			      const char *reason)
1245 {
1246 	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
1247 		return 0;
1248 
1249 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1250 	wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason);
1251 #endif
1252 
1253 	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
1254 	return IEEE80211_CONF_CHANGE_IDLE;
1255 }
1256 
1257 static u32 ieee80211_idle_on(struct ieee80211_local *local)
1258 {
1259 	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
1260 		return 0;
1261 
1262 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1263 	wiphy_debug(local->hw.wiphy, "device now idle\n");
1264 #endif
1265 
1266 	drv_flush(local, false);
1267 
1268 	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
1269 	return IEEE80211_CONF_CHANGE_IDLE;
1270 }
1271 
1272 u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
1273 {
1274 	struct ieee80211_sub_if_data *sdata;
1275 	int count = 0;
1276 	bool working = false, scanning = false, hw_roc = false;
1277 	struct ieee80211_work *wk;
1278 	unsigned int led_trig_start = 0, led_trig_stop = 0;
1279 
1280 #ifdef CONFIG_PROVE_LOCKING
1281 	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
1282 		!lockdep_is_held(&local->iflist_mtx));
1283 #endif
1284 	lockdep_assert_held(&local->mtx);
1285 
1286 	list_for_each_entry(sdata, &local->interfaces, list) {
1287 		if (!ieee80211_sdata_running(sdata)) {
1288 			sdata->vif.bss_conf.idle = true;
1289 			continue;
1290 		}
1291 
1292 		sdata->old_idle = sdata->vif.bss_conf.idle;
1293 
1294 		/* do not count disabled managed interfaces */
1295 		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
1296 		    !sdata->u.mgd.associated) {
1297 			sdata->vif.bss_conf.idle = true;
1298 			continue;
1299 		}
1300 		/* do not count unused IBSS interfaces */
1301 		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
1302 		    !sdata->u.ibss.ssid_len) {
1303 			sdata->vif.bss_conf.idle = true;
1304 			continue;
1305 		}
1306 		/* count everything else */
1307 		count++;
1308 	}
1309 
1310 	list_for_each_entry(wk, &local->work_list, list) {
1311 		working = true;
1312 		wk->sdata->vif.bss_conf.idle = false;
1313 	}
1314 
1315 	if (local->scan_sdata) {
1316 		scanning = true;
1317 		local->scan_sdata->vif.bss_conf.idle = false;
1318 	}
1319 
1320 	if (local->hw_roc_channel)
1321 		hw_roc = true;
1322 
1323 	list_for_each_entry(sdata, &local->interfaces, list) {
1324 		if (sdata->old_idle == sdata->vif.bss_conf.idle)
1325 			continue;
1326 		if (!ieee80211_sdata_running(sdata))
1327 			continue;
1328 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
1329 	}
1330 
1331 	if (working || scanning || hw_roc)
1332 		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
1333 	else
1334 		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
1335 
1336 	if (count)
1337 		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
1338 	else
1339 		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
1340 
1341 	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
1342 
1343 	if (hw_roc)
1344 		return ieee80211_idle_off(local, "hw remain-on-channel");
1345 	if (working)
1346 		return ieee80211_idle_off(local, "working");
1347 	if (scanning)
1348 		return ieee80211_idle_off(local, "scanning");
1349 	if (!count)
1350 		return ieee80211_idle_on(local);
1351 	else
1352 		return ieee80211_idle_off(local, "in use");
1353 
1354 	return 0;
1355 }
1356 
1357 void ieee80211_recalc_idle(struct ieee80211_local *local)
1358 {
1359 	u32 chg;
1360 
1361 	mutex_lock(&local->iflist_mtx);
1362 	chg = __ieee80211_recalc_idle(local);
1363 	mutex_unlock(&local->iflist_mtx);
1364 	if (chg)
1365 		ieee80211_hw_config(local, chg);
1366 }
1367 
1368 static int netdev_notify(struct notifier_block *nb,
1369 			 unsigned long state,
1370 			 void *ndev)
1371 {
1372 	struct net_device *dev = ndev;
1373 	struct ieee80211_sub_if_data *sdata;
1374 
1375 	if (state != NETDEV_CHANGENAME)
1376 		return 0;
1377 
1378 	if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
1379 		return 0;
1380 
1381 	if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
1382 		return 0;
1383 
1384 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1385 
1386 	memcpy(sdata->name, dev->name, IFNAMSIZ);
1387 
1388 	ieee80211_debugfs_rename_netdev(sdata);
1389 	return 0;
1390 }
1391 
1392 static struct notifier_block mac80211_netdev_notifier = {
1393 	.notifier_call = netdev_notify,
1394 };
1395 
1396 int ieee80211_iface_init(void)
1397 {
1398 	return register_netdevice_notifier(&mac80211_netdev_notifier);
1399 }
1400 
1401 void ieee80211_iface_exit(void)
1402 {
1403 	unregister_netdevice_notifier(&mac80211_netdev_notifier);
1404 }
1405