xref: /openbmc/linux/net/mac80211/iface.c (revision 4800cd83)
1 /*
2  * Interface handling (except master interface)
3  *
4  * Copyright 2002-2005, Instant802 Networks, Inc.
5  * Copyright 2005-2006, Devicescape Software, Inc.
6  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
7  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/if_arp.h>
16 #include <linux/netdevice.h>
17 #include <linux/rtnetlink.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
20 #include "ieee80211_i.h"
21 #include "sta_info.h"
22 #include "debugfs_netdev.h"
23 #include "mesh.h"
24 #include "led.h"
25 #include "driver-ops.h"
26 #include "wme.h"
27 #include "rate.h"
28 
29 /**
30  * DOC: Interface list locking
31  *
32  * The interface list in each struct ieee80211_local is protected
33  * three-fold:
34  *
35  * (1) modifications may only be done under the RTNL
36  * (2) modifications and readers are protected against each other by
37  *     the iflist_mtx.
38  * (3) modifications are done in an RCU manner so atomic readers
39  *     can traverse the list in RCU-safe blocks.
40  *
41  * As a consequence, reads (traversals) of the list can be protected
42  * by either the RTNL, the iflist_mtx or RCU.
43  */
44 
45 
46 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
47 {
48 	int meshhdrlen;
49 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
50 
51 	meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
52 
53 	/* FIX: what would be proper limits for MTU?
54 	 * This interface uses 802.3 frames. */
55 	if (new_mtu < 256 ||
56 	    new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
57 		return -EINVAL;
58 	}
59 
60 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
61 	printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
62 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
63 	dev->mtu = new_mtu;
64 	return 0;
65 }
66 
67 static int ieee80211_change_mac(struct net_device *dev, void *addr)
68 {
69 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
70 	struct sockaddr *sa = addr;
71 	int ret;
72 
73 	if (ieee80211_sdata_running(sdata))
74 		return -EBUSY;
75 
76 	ret = eth_mac_addr(dev, sa);
77 
78 	if (ret == 0)
79 		memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
80 
81 	return ret;
82 }
83 
84 static inline int identical_mac_addr_allowed(int type1, int type2)
85 {
86 	return type1 == NL80211_IFTYPE_MONITOR ||
87 		type2 == NL80211_IFTYPE_MONITOR ||
88 		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
89 		(type1 == NL80211_IFTYPE_WDS &&
90 			(type2 == NL80211_IFTYPE_WDS ||
91 			 type2 == NL80211_IFTYPE_AP)) ||
92 		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
93 		(type1 == NL80211_IFTYPE_AP_VLAN &&
94 			(type2 == NL80211_IFTYPE_AP ||
95 			 type2 == NL80211_IFTYPE_AP_VLAN));
96 }
97 
98 static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
99 					    enum nl80211_iftype iftype)
100 {
101 	struct ieee80211_local *local = sdata->local;
102 	struct ieee80211_sub_if_data *nsdata;
103 	struct net_device *dev = sdata->dev;
104 
105 	ASSERT_RTNL();
106 
107 	/* we hold the RTNL here so can safely walk the list */
108 	list_for_each_entry(nsdata, &local->interfaces, list) {
109 		struct net_device *ndev = nsdata->dev;
110 
111 		if (ndev != dev && ieee80211_sdata_running(nsdata)) {
112 			/*
113 			 * Allow only a single IBSS interface to be up at any
114 			 * time. This is restricted because beacon distribution
115 			 * cannot work properly if both are in the same IBSS.
116 			 *
117 			 * To remove this restriction we'd have to disallow them
118 			 * from setting the same SSID on different IBSS interfaces
119 			 * belonging to the same hardware. Then, however, we're
120 			 * faced with having to adopt two different TSF timers...
121 			 */
122 			if (iftype == NL80211_IFTYPE_ADHOC &&
123 			    nsdata->vif.type == NL80211_IFTYPE_ADHOC)
124 				return -EBUSY;
125 
126 			/*
127 			 * The remaining checks are only performed for interfaces
128 			 * with the same MAC address.
129 			 */
130 			if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
131 				continue;
132 
133 			/*
134 			 * check whether it may have the same address
135 			 */
136 			if (!identical_mac_addr_allowed(iftype,
137 							nsdata->vif.type))
138 				return -ENOTUNIQ;
139 
140 			/*
141 			 * can only add VLANs to enabled APs
142 			 */
143 			if (iftype == NL80211_IFTYPE_AP_VLAN &&
144 			    nsdata->vif.type == NL80211_IFTYPE_AP)
145 				sdata->bss = &nsdata->u.ap;
146 		}
147 	}
148 
149 	return 0;
150 }
151 
152 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
153 				    const int offset)
154 {
155 	struct ieee80211_local *local = sdata->local;
156 	u32 flags = sdata->u.mntr_flags;
157 
158 #define ADJUST(_f, _s)	do {					\
159 	if (flags & MONITOR_FLAG_##_f)				\
160 		local->fif_##_s += offset;			\
161 	} while (0)
162 
163 	ADJUST(FCSFAIL, fcsfail);
164 	ADJUST(PLCPFAIL, plcpfail);
165 	ADJUST(CONTROL, control);
166 	ADJUST(CONTROL, pspoll);
167 	ADJUST(OTHER_BSS, other_bss);
168 
169 #undef ADJUST
170 }
171 
172 /*
173  * NOTE: Be very careful when changing this function, it must NOT return
174  * an error on interface type changes that have been pre-checked, so most
175  * checks should be in ieee80211_check_concurrent_iface.
176  */
177 static int ieee80211_do_open(struct net_device *dev, bool coming_up)
178 {
179 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
180 	struct ieee80211_local *local = sdata->local;
181 	struct sta_info *sta;
182 	u32 changed = 0;
183 	int res;
184 	u32 hw_reconf_flags = 0;
185 
186 	switch (sdata->vif.type) {
187 	case NL80211_IFTYPE_WDS:
188 		if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
189 			return -ENOLINK;
190 		break;
191 	case NL80211_IFTYPE_AP_VLAN:
192 		if (!sdata->bss)
193 			return -ENOLINK;
194 		list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
195 		break;
196 	case NL80211_IFTYPE_AP:
197 		sdata->bss = &sdata->u.ap;
198 		break;
199 	case NL80211_IFTYPE_MESH_POINT:
200 	case NL80211_IFTYPE_STATION:
201 	case NL80211_IFTYPE_MONITOR:
202 	case NL80211_IFTYPE_ADHOC:
203 		/* no special treatment */
204 		break;
205 	case NL80211_IFTYPE_UNSPECIFIED:
206 	case NUM_NL80211_IFTYPES:
207 	case NL80211_IFTYPE_P2P_CLIENT:
208 	case NL80211_IFTYPE_P2P_GO:
209 		/* cannot happen */
210 		WARN_ON(1);
211 		break;
212 	}
213 
214 	if (local->open_count == 0) {
215 		res = drv_start(local);
216 		if (res)
217 			goto err_del_bss;
218 		if (local->ops->napi_poll)
219 			napi_enable(&local->napi);
220 		/* we're brought up, everything changes */
221 		hw_reconf_flags = ~0;
222 		ieee80211_led_radio(local, true);
223 		ieee80211_mod_tpt_led_trig(local,
224 					   IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
225 	}
226 
227 	/*
228 	 * Copy the hopefully now-present MAC address to
229 	 * this interface, if it has the special null one.
230 	 */
231 	if (is_zero_ether_addr(dev->dev_addr)) {
232 		memcpy(dev->dev_addr,
233 		       local->hw.wiphy->perm_addr,
234 		       ETH_ALEN);
235 		memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
236 
237 		if (!is_valid_ether_addr(dev->dev_addr)) {
238 			if (!local->open_count)
239 				drv_stop(local);
240 			return -EADDRNOTAVAIL;
241 		}
242 	}
243 
244 	switch (sdata->vif.type) {
245 	case NL80211_IFTYPE_AP_VLAN:
246 		/* no need to tell driver */
247 		break;
248 	case NL80211_IFTYPE_MONITOR:
249 		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
250 			local->cooked_mntrs++;
251 			break;
252 		}
253 
254 		/* must be before the call to ieee80211_configure_filter */
255 		local->monitors++;
256 		if (local->monitors == 1) {
257 			local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
258 			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
259 		}
260 
261 		ieee80211_adjust_monitor_flags(sdata, 1);
262 		ieee80211_configure_filter(local);
263 
264 		netif_carrier_on(dev);
265 		break;
266 	default:
267 		if (coming_up) {
268 			res = drv_add_interface(local, &sdata->vif);
269 			if (res)
270 				goto err_stop;
271 		}
272 
273 		if (sdata->vif.type == NL80211_IFTYPE_AP) {
274 			local->fif_pspoll++;
275 			local->fif_probe_req++;
276 
277 			ieee80211_configure_filter(local);
278 		} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
279 			local->fif_probe_req++;
280 		}
281 
282 		changed |= ieee80211_reset_erp_info(sdata);
283 		ieee80211_bss_info_change_notify(sdata, changed);
284 
285 		if (sdata->vif.type == NL80211_IFTYPE_STATION)
286 			netif_carrier_off(dev);
287 		else
288 			netif_carrier_on(dev);
289 	}
290 
291 	set_bit(SDATA_STATE_RUNNING, &sdata->state);
292 
293 	if (sdata->vif.type == NL80211_IFTYPE_WDS) {
294 		/* Create STA entry for the WDS peer */
295 		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
296 				     GFP_KERNEL);
297 		if (!sta) {
298 			res = -ENOMEM;
299 			goto err_del_interface;
300 		}
301 
302 		/* no locking required since STA is not live yet */
303 		sta->flags |= WLAN_STA_AUTHORIZED;
304 
305 		res = sta_info_insert(sta);
306 		if (res) {
307 			/* STA has been freed */
308 			goto err_del_interface;
309 		}
310 
311 		rate_control_rate_init(sta);
312 	}
313 
314 	/*
315 	 * set_multicast_list will be invoked by the networking core
316 	 * which will check whether any increments here were done in
317 	 * error and sync them down to the hardware as filter flags.
318 	 */
319 	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
320 		atomic_inc(&local->iff_allmultis);
321 
322 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
323 		atomic_inc(&local->iff_promiscs);
324 
325 	mutex_lock(&local->mtx);
326 	hw_reconf_flags |= __ieee80211_recalc_idle(local);
327 	mutex_unlock(&local->mtx);
328 
329 	if (coming_up)
330 		local->open_count++;
331 
332 	if (hw_reconf_flags) {
333 		ieee80211_hw_config(local, hw_reconf_flags);
334 		/*
335 		 * set default queue parameters so drivers don't
336 		 * need to initialise the hardware if the hardware
337 		 * doesn't start up with sane defaults
338 		 */
339 		ieee80211_set_wmm_default(sdata);
340 	}
341 
342 	ieee80211_recalc_ps(local, -1);
343 
344 	netif_tx_start_all_queues(dev);
345 
346 	return 0;
347  err_del_interface:
348 	drv_remove_interface(local, &sdata->vif);
349  err_stop:
350 	if (!local->open_count)
351 		drv_stop(local);
352  err_del_bss:
353 	sdata->bss = NULL;
354 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
355 		list_del(&sdata->u.vlan.list);
356 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
357 	return res;
358 }
359 
360 static int ieee80211_open(struct net_device *dev)
361 {
362 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
363 	int err;
364 
365 	/* fail early if user set an invalid address */
366 	if (!is_zero_ether_addr(dev->dev_addr) &&
367 	    !is_valid_ether_addr(dev->dev_addr))
368 		return -EADDRNOTAVAIL;
369 
370 	err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
371 	if (err)
372 		return err;
373 
374 	return ieee80211_do_open(dev, true);
375 }
376 
377 static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
378 			      bool going_down)
379 {
380 	struct ieee80211_local *local = sdata->local;
381 	unsigned long flags;
382 	struct sk_buff *skb, *tmp;
383 	u32 hw_reconf_flags = 0;
384 	int i;
385 
386 	if (local->scan_sdata == sdata)
387 		ieee80211_scan_cancel(local);
388 
389 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
390 
391 	/*
392 	 * Stop TX on this interface first.
393 	 */
394 	netif_tx_stop_all_queues(sdata->dev);
395 
396 	/*
397 	 * Purge work for this interface.
398 	 */
399 	ieee80211_work_purge(sdata);
400 
401 	/*
402 	 * Remove all stations associated with this interface.
403 	 *
404 	 * This must be done before calling ops->remove_interface()
405 	 * because otherwise we can later invoke ops->sta_notify()
406 	 * whenever the STAs are removed, and that invalidates driver
407 	 * assumptions about always getting a vif pointer that is valid
408 	 * (because if we remove a STA after ops->remove_interface()
409 	 * the driver will have removed the vif info already!)
410 	 *
411 	 * This is relevant only in AP, WDS and mesh modes, since in
412 	 * all other modes we've already removed all stations when
413 	 * disconnecting etc.
414 	 */
415 	sta_info_flush(local, sdata);
416 
417 	/*
418 	 * Don't count this interface for promisc/allmulti while it
419 	 * is down. dev_mc_unsync() will invoke set_multicast_list
420 	 * on the master interface which will sync these down to the
421 	 * hardware as filter flags.
422 	 */
423 	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
424 		atomic_dec(&local->iff_allmultis);
425 
426 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
427 		atomic_dec(&local->iff_promiscs);
428 
429 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
430 		local->fif_pspoll--;
431 		local->fif_probe_req--;
432 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
433 		local->fif_probe_req--;
434 	}
435 
436 	netif_addr_lock_bh(sdata->dev);
437 	spin_lock_bh(&local->filter_lock);
438 	__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
439 			 sdata->dev->addr_len);
440 	spin_unlock_bh(&local->filter_lock);
441 	netif_addr_unlock_bh(sdata->dev);
442 
443 	ieee80211_configure_filter(local);
444 
445 	del_timer_sync(&local->dynamic_ps_timer);
446 	cancel_work_sync(&local->dynamic_ps_enable_work);
447 
448 	/* APs need special treatment */
449 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
450 		struct ieee80211_sub_if_data *vlan, *tmpsdata;
451 		struct beacon_data *old_beacon = sdata->u.ap.beacon;
452 
453 		/* sdata_running will return false, so this will disable */
454 		ieee80211_bss_info_change_notify(sdata,
455 						 BSS_CHANGED_BEACON_ENABLED);
456 
457 		/* remove beacon */
458 		rcu_assign_pointer(sdata->u.ap.beacon, NULL);
459 		synchronize_rcu();
460 		kfree(old_beacon);
461 
462 		/* free all potentially still buffered bcast frames */
463 		while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
464 			local->total_ps_buffered--;
465 			dev_kfree_skb(skb);
466 		}
467 
468 		/* down all dependent devices, that is VLANs */
469 		list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
470 					 u.vlan.list)
471 			dev_close(vlan->dev);
472 		WARN_ON(!list_empty(&sdata->u.ap.vlans));
473 	}
474 
475 	if (going_down)
476 		local->open_count--;
477 
478 	switch (sdata->vif.type) {
479 	case NL80211_IFTYPE_AP_VLAN:
480 		list_del(&sdata->u.vlan.list);
481 		/* no need to tell driver */
482 		break;
483 	case NL80211_IFTYPE_MONITOR:
484 		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
485 			local->cooked_mntrs--;
486 			break;
487 		}
488 
489 		local->monitors--;
490 		if (local->monitors == 0) {
491 			local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
492 			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
493 		}
494 
495 		ieee80211_adjust_monitor_flags(sdata, -1);
496 		ieee80211_configure_filter(local);
497 		break;
498 	default:
499 		flush_work(&sdata->work);
500 		/*
501 		 * When we get here, the interface is marked down.
502 		 * Call synchronize_rcu() to wait for the RX path
503 		 * should it be using the interface and enqueuing
504 		 * frames at this very time on another CPU.
505 		 */
506 		synchronize_rcu();
507 		skb_queue_purge(&sdata->skb_queue);
508 
509 		/*
510 		 * Disable beaconing here for mesh only, AP and IBSS
511 		 * are already taken care of.
512 		 */
513 		if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
514 			ieee80211_bss_info_change_notify(sdata,
515 				BSS_CHANGED_BEACON_ENABLED);
516 
517 		/*
518 		 * Free all remaining keys, there shouldn't be any,
519 		 * except maybe group keys in AP more or WDS?
520 		 */
521 		ieee80211_free_keys(sdata);
522 
523 		if (going_down)
524 			drv_remove_interface(local, &sdata->vif);
525 	}
526 
527 	sdata->bss = NULL;
528 
529 	mutex_lock(&local->mtx);
530 	hw_reconf_flags |= __ieee80211_recalc_idle(local);
531 	mutex_unlock(&local->mtx);
532 
533 	ieee80211_recalc_ps(local, -1);
534 
535 	if (local->open_count == 0) {
536 		if (local->ops->napi_poll)
537 			napi_disable(&local->napi);
538 		ieee80211_clear_tx_pending(local);
539 		ieee80211_stop_device(local);
540 
541 		/* no reconfiguring after stop! */
542 		hw_reconf_flags = 0;
543 	}
544 
545 	/* do after stop to avoid reconfiguring when we stop anyway */
546 	if (hw_reconf_flags)
547 		ieee80211_hw_config(local, hw_reconf_flags);
548 
549 	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
550 	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
551 		skb_queue_walk_safe(&local->pending[i], skb, tmp) {
552 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
553 			if (info->control.vif == &sdata->vif) {
554 				__skb_unlink(skb, &local->pending[i]);
555 				dev_kfree_skb_irq(skb);
556 			}
557 		}
558 	}
559 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
560 }
561 
562 static int ieee80211_stop(struct net_device *dev)
563 {
564 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
565 
566 	ieee80211_do_stop(sdata, true);
567 
568 	return 0;
569 }
570 
571 static void ieee80211_set_multicast_list(struct net_device *dev)
572 {
573 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
574 	struct ieee80211_local *local = sdata->local;
575 	int allmulti, promisc, sdata_allmulti, sdata_promisc;
576 
577 	allmulti = !!(dev->flags & IFF_ALLMULTI);
578 	promisc = !!(dev->flags & IFF_PROMISC);
579 	sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
580 	sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
581 
582 	if (allmulti != sdata_allmulti) {
583 		if (dev->flags & IFF_ALLMULTI)
584 			atomic_inc(&local->iff_allmultis);
585 		else
586 			atomic_dec(&local->iff_allmultis);
587 		sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
588 	}
589 
590 	if (promisc != sdata_promisc) {
591 		if (dev->flags & IFF_PROMISC)
592 			atomic_inc(&local->iff_promiscs);
593 		else
594 			atomic_dec(&local->iff_promiscs);
595 		sdata->flags ^= IEEE80211_SDATA_PROMISC;
596 	}
597 	spin_lock_bh(&local->filter_lock);
598 	__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
599 	spin_unlock_bh(&local->filter_lock);
600 	ieee80211_queue_work(&local->hw, &local->reconfig_filter);
601 }
602 
603 /*
604  * Called when the netdev is removed or, by the code below, before
605  * the interface type changes.
606  */
607 static void ieee80211_teardown_sdata(struct net_device *dev)
608 {
609 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
610 	struct ieee80211_local *local = sdata->local;
611 	int flushed;
612 	int i;
613 
614 	/* free extra data */
615 	ieee80211_free_keys(sdata);
616 
617 	ieee80211_debugfs_remove_netdev(sdata);
618 
619 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
620 		__skb_queue_purge(&sdata->fragments[i].skb_list);
621 	sdata->fragment_next = 0;
622 
623 	if (ieee80211_vif_is_mesh(&sdata->vif))
624 		mesh_rmc_free(sdata);
625 
626 	flushed = sta_info_flush(local, sdata);
627 	WARN_ON(flushed);
628 }
629 
630 static u16 ieee80211_netdev_select_queue(struct net_device *dev,
631 					 struct sk_buff *skb)
632 {
633 	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
634 }
635 
636 static const struct net_device_ops ieee80211_dataif_ops = {
637 	.ndo_open		= ieee80211_open,
638 	.ndo_stop		= ieee80211_stop,
639 	.ndo_uninit		= ieee80211_teardown_sdata,
640 	.ndo_start_xmit		= ieee80211_subif_start_xmit,
641 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
642 	.ndo_change_mtu 	= ieee80211_change_mtu,
643 	.ndo_set_mac_address 	= ieee80211_change_mac,
644 	.ndo_select_queue	= ieee80211_netdev_select_queue,
645 };
646 
647 static u16 ieee80211_monitor_select_queue(struct net_device *dev,
648 					  struct sk_buff *skb)
649 {
650 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
651 	struct ieee80211_local *local = sdata->local;
652 	struct ieee80211_hdr *hdr;
653 	struct ieee80211_radiotap_header *rtap = (void *)skb->data;
654 	u8 *p;
655 
656 	if (local->hw.queues < 4)
657 		return 0;
658 
659 	if (skb->len < 4 ||
660 	    skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
661 		return 0; /* doesn't matter, frame will be dropped */
662 
663 	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
664 
665 	if (!ieee80211_is_data(hdr->frame_control)) {
666 		skb->priority = 7;
667 		return ieee802_1d_to_ac[skb->priority];
668 	}
669 	if (!ieee80211_is_data_qos(hdr->frame_control)) {
670 		skb->priority = 0;
671 		return ieee802_1d_to_ac[skb->priority];
672 	}
673 
674 	p = ieee80211_get_qos_ctl(hdr);
675 	skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
676 
677 	return ieee80211_downgrade_queue(local, skb);
678 }
679 
680 static const struct net_device_ops ieee80211_monitorif_ops = {
681 	.ndo_open		= ieee80211_open,
682 	.ndo_stop		= ieee80211_stop,
683 	.ndo_uninit		= ieee80211_teardown_sdata,
684 	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
685 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
686 	.ndo_change_mtu 	= ieee80211_change_mtu,
687 	.ndo_set_mac_address 	= eth_mac_addr,
688 	.ndo_select_queue	= ieee80211_monitor_select_queue,
689 };
690 
691 static void ieee80211_if_setup(struct net_device *dev)
692 {
693 	ether_setup(dev);
694 	dev->netdev_ops = &ieee80211_dataif_ops;
695 	dev->destructor = free_netdev;
696 }
697 
698 static void ieee80211_iface_work(struct work_struct *work)
699 {
700 	struct ieee80211_sub_if_data *sdata =
701 		container_of(work, struct ieee80211_sub_if_data, work);
702 	struct ieee80211_local *local = sdata->local;
703 	struct sk_buff *skb;
704 	struct sta_info *sta;
705 	struct ieee80211_ra_tid *ra_tid;
706 
707 	if (!ieee80211_sdata_running(sdata))
708 		return;
709 
710 	if (local->scanning)
711 		return;
712 
713 	/*
714 	 * ieee80211_queue_work() should have picked up most cases,
715 	 * here we'll pick the rest.
716 	 */
717 	if (WARN(local->suspended,
718 		 "interface work scheduled while going to suspend\n"))
719 		return;
720 
721 	/* first process frames */
722 	while ((skb = skb_dequeue(&sdata->skb_queue))) {
723 		struct ieee80211_mgmt *mgmt = (void *)skb->data;
724 
725 		if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
726 			ra_tid = (void *)&skb->cb;
727 			ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
728 						 ra_tid->tid);
729 		} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
730 			ra_tid = (void *)&skb->cb;
731 			ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
732 						ra_tid->tid);
733 		} else if (ieee80211_is_action(mgmt->frame_control) &&
734 			   mgmt->u.action.category == WLAN_CATEGORY_BACK) {
735 			int len = skb->len;
736 
737 			mutex_lock(&local->sta_mtx);
738 			sta = sta_info_get_bss(sdata, mgmt->sa);
739 			if (sta) {
740 				switch (mgmt->u.action.u.addba_req.action_code) {
741 				case WLAN_ACTION_ADDBA_REQ:
742 					ieee80211_process_addba_request(
743 							local, sta, mgmt, len);
744 					break;
745 				case WLAN_ACTION_ADDBA_RESP:
746 					ieee80211_process_addba_resp(local, sta,
747 								     mgmt, len);
748 					break;
749 				case WLAN_ACTION_DELBA:
750 					ieee80211_process_delba(sdata, sta,
751 								mgmt, len);
752 					break;
753 				default:
754 					WARN_ON(1);
755 					break;
756 				}
757 			}
758 			mutex_unlock(&local->sta_mtx);
759 		} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
760 			struct ieee80211_hdr *hdr = (void *)mgmt;
761 			/*
762 			 * So the frame isn't mgmt, but frame_control
763 			 * is at the right place anyway, of course, so
764 			 * the if statement is correct.
765 			 *
766 			 * Warn if we have other data frame types here,
767 			 * they must not get here.
768 			 */
769 			WARN_ON(hdr->frame_control &
770 					cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
771 			WARN_ON(!(hdr->seq_ctrl &
772 					cpu_to_le16(IEEE80211_SCTL_FRAG)));
773 			/*
774 			 * This was a fragment of a frame, received while
775 			 * a block-ack session was active. That cannot be
776 			 * right, so terminate the session.
777 			 */
778 			mutex_lock(&local->sta_mtx);
779 			sta = sta_info_get_bss(sdata, mgmt->sa);
780 			if (sta) {
781 				u16 tid = *ieee80211_get_qos_ctl(hdr) &
782 						IEEE80211_QOS_CTL_TID_MASK;
783 
784 				__ieee80211_stop_rx_ba_session(
785 					sta, tid, WLAN_BACK_RECIPIENT,
786 					WLAN_REASON_QSTA_REQUIRE_SETUP,
787 					true);
788 			}
789 			mutex_unlock(&local->sta_mtx);
790 		} else switch (sdata->vif.type) {
791 		case NL80211_IFTYPE_STATION:
792 			ieee80211_sta_rx_queued_mgmt(sdata, skb);
793 			break;
794 		case NL80211_IFTYPE_ADHOC:
795 			ieee80211_ibss_rx_queued_mgmt(sdata, skb);
796 			break;
797 		case NL80211_IFTYPE_MESH_POINT:
798 			if (!ieee80211_vif_is_mesh(&sdata->vif))
799 				break;
800 			ieee80211_mesh_rx_queued_mgmt(sdata, skb);
801 			break;
802 		default:
803 			WARN(1, "frame for unexpected interface type");
804 			break;
805 		}
806 
807 		kfree_skb(skb);
808 	}
809 
810 	/* then other type-dependent work */
811 	switch (sdata->vif.type) {
812 	case NL80211_IFTYPE_STATION:
813 		ieee80211_sta_work(sdata);
814 		break;
815 	case NL80211_IFTYPE_ADHOC:
816 		ieee80211_ibss_work(sdata);
817 		break;
818 	case NL80211_IFTYPE_MESH_POINT:
819 		if (!ieee80211_vif_is_mesh(&sdata->vif))
820 			break;
821 		ieee80211_mesh_work(sdata);
822 		break;
823 	default:
824 		break;
825 	}
826 }
827 
828 
829 /*
830  * Helper function to initialise an interface to a specific type.
831  */
832 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
833 				  enum nl80211_iftype type)
834 {
835 	/* clear type-dependent union */
836 	memset(&sdata->u, 0, sizeof(sdata->u));
837 
838 	/* and set some type-dependent values */
839 	sdata->vif.type = type;
840 	sdata->vif.p2p = false;
841 	sdata->dev->netdev_ops = &ieee80211_dataif_ops;
842 	sdata->wdev.iftype = type;
843 
844 	sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
845 	sdata->control_port_no_encrypt = false;
846 
847 	/* only monitor differs */
848 	sdata->dev->type = ARPHRD_ETHER;
849 
850 	skb_queue_head_init(&sdata->skb_queue);
851 	INIT_WORK(&sdata->work, ieee80211_iface_work);
852 
853 	switch (type) {
854 	case NL80211_IFTYPE_P2P_GO:
855 		type = NL80211_IFTYPE_AP;
856 		sdata->vif.type = type;
857 		sdata->vif.p2p = true;
858 		/* fall through */
859 	case NL80211_IFTYPE_AP:
860 		skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
861 		INIT_LIST_HEAD(&sdata->u.ap.vlans);
862 		break;
863 	case NL80211_IFTYPE_P2P_CLIENT:
864 		type = NL80211_IFTYPE_STATION;
865 		sdata->vif.type = type;
866 		sdata->vif.p2p = true;
867 		/* fall through */
868 	case NL80211_IFTYPE_STATION:
869 		ieee80211_sta_setup_sdata(sdata);
870 		break;
871 	case NL80211_IFTYPE_ADHOC:
872 		ieee80211_ibss_setup_sdata(sdata);
873 		break;
874 	case NL80211_IFTYPE_MESH_POINT:
875 		if (ieee80211_vif_is_mesh(&sdata->vif))
876 			ieee80211_mesh_init_sdata(sdata);
877 		break;
878 	case NL80211_IFTYPE_MONITOR:
879 		sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
880 		sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
881 		sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
882 				      MONITOR_FLAG_OTHER_BSS;
883 		break;
884 	case NL80211_IFTYPE_WDS:
885 	case NL80211_IFTYPE_AP_VLAN:
886 		break;
887 	case NL80211_IFTYPE_UNSPECIFIED:
888 	case NUM_NL80211_IFTYPES:
889 		BUG();
890 		break;
891 	}
892 
893 	ieee80211_debugfs_add_netdev(sdata);
894 }
895 
896 static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
897 					   enum nl80211_iftype type)
898 {
899 	struct ieee80211_local *local = sdata->local;
900 	int ret, err;
901 	enum nl80211_iftype internal_type = type;
902 	bool p2p = false;
903 
904 	ASSERT_RTNL();
905 
906 	if (!local->ops->change_interface)
907 		return -EBUSY;
908 
909 	switch (sdata->vif.type) {
910 	case NL80211_IFTYPE_AP:
911 	case NL80211_IFTYPE_STATION:
912 	case NL80211_IFTYPE_ADHOC:
913 		/*
914 		 * Could maybe also all others here?
915 		 * Just not sure how that interacts
916 		 * with the RX/config path e.g. for
917 		 * mesh.
918 		 */
919 		break;
920 	default:
921 		return -EBUSY;
922 	}
923 
924 	switch (type) {
925 	case NL80211_IFTYPE_AP:
926 	case NL80211_IFTYPE_STATION:
927 	case NL80211_IFTYPE_ADHOC:
928 		/*
929 		 * Could probably support everything
930 		 * but WDS here (WDS do_open can fail
931 		 * under memory pressure, which this
932 		 * code isn't prepared to handle).
933 		 */
934 		break;
935 	case NL80211_IFTYPE_P2P_CLIENT:
936 		p2p = true;
937 		internal_type = NL80211_IFTYPE_STATION;
938 		break;
939 	case NL80211_IFTYPE_P2P_GO:
940 		p2p = true;
941 		internal_type = NL80211_IFTYPE_AP;
942 		break;
943 	default:
944 		return -EBUSY;
945 	}
946 
947 	ret = ieee80211_check_concurrent_iface(sdata, internal_type);
948 	if (ret)
949 		return ret;
950 
951 	ieee80211_do_stop(sdata, false);
952 
953 	ieee80211_teardown_sdata(sdata->dev);
954 
955 	ret = drv_change_interface(local, sdata, internal_type, p2p);
956 	if (ret)
957 		type = sdata->vif.type;
958 
959 	ieee80211_setup_sdata(sdata, type);
960 
961 	err = ieee80211_do_open(sdata->dev, false);
962 	WARN(err, "type change: do_open returned %d", err);
963 
964 	return ret;
965 }
966 
967 int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
968 			     enum nl80211_iftype type)
969 {
970 	int ret;
971 
972 	ASSERT_RTNL();
973 
974 	if (type == ieee80211_vif_type_p2p(&sdata->vif))
975 		return 0;
976 
977 	/* Setting ad-hoc mode on non-IBSS channel is not supported. */
978 	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
979 	    type == NL80211_IFTYPE_ADHOC)
980 		return -EOPNOTSUPP;
981 
982 	if (ieee80211_sdata_running(sdata)) {
983 		ret = ieee80211_runtime_change_iftype(sdata, type);
984 		if (ret)
985 			return ret;
986 	} else {
987 		/* Purge and reset type-dependent state. */
988 		ieee80211_teardown_sdata(sdata->dev);
989 		ieee80211_setup_sdata(sdata, type);
990 	}
991 
992 	/* reset some values that shouldn't be kept across type changes */
993 	sdata->vif.bss_conf.basic_rates =
994 		ieee80211_mandatory_rates(sdata->local,
995 			sdata->local->hw.conf.channel->band);
996 	sdata->drop_unencrypted = 0;
997 	if (type == NL80211_IFTYPE_STATION)
998 		sdata->u.mgd.use_4addr = false;
999 
1000 	return 0;
1001 }
1002 
1003 static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
1004 				       struct net_device *dev,
1005 				       enum nl80211_iftype type)
1006 {
1007 	struct ieee80211_sub_if_data *sdata;
1008 	u64 mask, start, addr, val, inc;
1009 	u8 *m;
1010 	u8 tmp_addr[ETH_ALEN];
1011 	int i;
1012 
1013 	/* default ... something at least */
1014 	memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
1015 
1016 	if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
1017 	    local->hw.wiphy->n_addresses <= 1)
1018 		return;
1019 
1020 
1021 	mutex_lock(&local->iflist_mtx);
1022 
1023 	switch (type) {
1024 	case NL80211_IFTYPE_MONITOR:
1025 		/* doesn't matter */
1026 		break;
1027 	case NL80211_IFTYPE_WDS:
1028 	case NL80211_IFTYPE_AP_VLAN:
1029 		/* match up with an AP interface */
1030 		list_for_each_entry(sdata, &local->interfaces, list) {
1031 			if (sdata->vif.type != NL80211_IFTYPE_AP)
1032 				continue;
1033 			memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
1034 			break;
1035 		}
1036 		/* keep default if no AP interface present */
1037 		break;
1038 	default:
1039 		/* assign a new address if possible -- try n_addresses first */
1040 		for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
1041 			bool used = false;
1042 
1043 			list_for_each_entry(sdata, &local->interfaces, list) {
1044 				if (memcmp(local->hw.wiphy->addresses[i].addr,
1045 					   sdata->vif.addr, ETH_ALEN) == 0) {
1046 					used = true;
1047 					break;
1048 				}
1049 			}
1050 
1051 			if (!used) {
1052 				memcpy(dev->perm_addr,
1053 				       local->hw.wiphy->addresses[i].addr,
1054 				       ETH_ALEN);
1055 				break;
1056 			}
1057 		}
1058 
1059 		/* try mask if available */
1060 		if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
1061 			break;
1062 
1063 		m = local->hw.wiphy->addr_mask;
1064 		mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1065 			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1066 			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1067 
1068 		if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
1069 			/* not a contiguous mask ... not handled now! */
1070 			printk(KERN_DEBUG "not contiguous\n");
1071 			break;
1072 		}
1073 
1074 		m = local->hw.wiphy->perm_addr;
1075 		start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1076 			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1077 			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1078 
1079 		inc = 1ULL<<__ffs64(mask);
1080 		val = (start & mask);
1081 		addr = (start & ~mask) | (val & mask);
1082 		do {
1083 			bool used = false;
1084 
1085 			tmp_addr[5] = addr >> 0*8;
1086 			tmp_addr[4] = addr >> 1*8;
1087 			tmp_addr[3] = addr >> 2*8;
1088 			tmp_addr[2] = addr >> 3*8;
1089 			tmp_addr[1] = addr >> 4*8;
1090 			tmp_addr[0] = addr >> 5*8;
1091 
1092 			val += inc;
1093 
1094 			list_for_each_entry(sdata, &local->interfaces, list) {
1095 				if (memcmp(tmp_addr, sdata->vif.addr,
1096 							ETH_ALEN) == 0) {
1097 					used = true;
1098 					break;
1099 				}
1100 			}
1101 
1102 			if (!used) {
1103 				memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
1104 				break;
1105 			}
1106 			addr = (start & ~mask) | (val & mask);
1107 		} while (addr != start);
1108 
1109 		break;
1110 	}
1111 
1112 	mutex_unlock(&local->iflist_mtx);
1113 }
1114 
1115 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
1116 		     struct net_device **new_dev, enum nl80211_iftype type,
1117 		     struct vif_params *params)
1118 {
1119 	struct net_device *ndev;
1120 	struct ieee80211_sub_if_data *sdata = NULL;
1121 	int ret, i;
1122 
1123 	ASSERT_RTNL();
1124 
1125 	ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
1126 			       name, ieee80211_if_setup, local->hw.queues);
1127 	if (!ndev)
1128 		return -ENOMEM;
1129 	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
1130 
1131 	ndev->needed_headroom = local->tx_headroom +
1132 				4*6 /* four MAC addresses */
1133 				+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
1134 				+ 6 /* mesh */
1135 				+ 8 /* rfc1042/bridge tunnel */
1136 				- ETH_HLEN /* ethernet hard_header_len */
1137 				+ IEEE80211_ENCRYPT_HEADROOM;
1138 	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
1139 
1140 	ret = dev_alloc_name(ndev, ndev->name);
1141 	if (ret < 0)
1142 		goto fail;
1143 
1144 	ieee80211_assign_perm_addr(local, ndev, type);
1145 	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
1146 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
1147 
1148 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
1149 	sdata = netdev_priv(ndev);
1150 	ndev->ieee80211_ptr = &sdata->wdev;
1151 	memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
1152 	memcpy(sdata->name, ndev->name, IFNAMSIZ);
1153 
1154 	/* initialise type-independent data */
1155 	sdata->wdev.wiphy = local->hw.wiphy;
1156 	sdata->local = local;
1157 	sdata->dev = ndev;
1158 #ifdef CONFIG_INET
1159 	sdata->arp_filter_state = true;
1160 #endif
1161 
1162 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
1163 		skb_queue_head_init(&sdata->fragments[i].skb_list);
1164 
1165 	INIT_LIST_HEAD(&sdata->key_list);
1166 
1167 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
1168 		struct ieee80211_supported_band *sband;
1169 		sband = local->hw.wiphy->bands[i];
1170 		sdata->rc_rateidx_mask[i] =
1171 			sband ? (1 << sband->n_bitrates) - 1 : 0;
1172 	}
1173 
1174 	/* setup type-dependent data */
1175 	ieee80211_setup_sdata(sdata, type);
1176 
1177 	if (params) {
1178 		ndev->ieee80211_ptr->use_4addr = params->use_4addr;
1179 		if (type == NL80211_IFTYPE_STATION)
1180 			sdata->u.mgd.use_4addr = params->use_4addr;
1181 	}
1182 
1183 	ret = register_netdevice(ndev);
1184 	if (ret)
1185 		goto fail;
1186 
1187 	mutex_lock(&local->iflist_mtx);
1188 	list_add_tail_rcu(&sdata->list, &local->interfaces);
1189 	mutex_unlock(&local->iflist_mtx);
1190 
1191 	if (new_dev)
1192 		*new_dev = ndev;
1193 
1194 	return 0;
1195 
1196  fail:
1197 	free_netdev(ndev);
1198 	return ret;
1199 }
1200 
1201 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
1202 {
1203 	ASSERT_RTNL();
1204 
1205 	mutex_lock(&sdata->local->iflist_mtx);
1206 	list_del_rcu(&sdata->list);
1207 	mutex_unlock(&sdata->local->iflist_mtx);
1208 
1209 	synchronize_rcu();
1210 	unregister_netdevice(sdata->dev);
1211 }
1212 
1213 /*
1214  * Remove all interfaces, may only be called at hardware unregistration
1215  * time because it doesn't do RCU-safe list removals.
1216  */
1217 void ieee80211_remove_interfaces(struct ieee80211_local *local)
1218 {
1219 	struct ieee80211_sub_if_data *sdata, *tmp;
1220 	LIST_HEAD(unreg_list);
1221 
1222 	ASSERT_RTNL();
1223 
1224 	mutex_lock(&local->iflist_mtx);
1225 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
1226 		list_del(&sdata->list);
1227 
1228 		unregister_netdevice_queue(sdata->dev, &unreg_list);
1229 	}
1230 	mutex_unlock(&local->iflist_mtx);
1231 	unregister_netdevice_many(&unreg_list);
1232 	list_del(&unreg_list);
1233 }
1234 
1235 static u32 ieee80211_idle_off(struct ieee80211_local *local,
1236 			      const char *reason)
1237 {
1238 	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
1239 		return 0;
1240 
1241 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1242 	wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason);
1243 #endif
1244 
1245 	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
1246 	return IEEE80211_CONF_CHANGE_IDLE;
1247 }
1248 
1249 static u32 ieee80211_idle_on(struct ieee80211_local *local)
1250 {
1251 	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
1252 		return 0;
1253 
1254 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1255 	wiphy_debug(local->hw.wiphy, "device now idle\n");
1256 #endif
1257 
1258 	drv_flush(local, false);
1259 
1260 	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
1261 	return IEEE80211_CONF_CHANGE_IDLE;
1262 }
1263 
1264 u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
1265 {
1266 	struct ieee80211_sub_if_data *sdata;
1267 	int count = 0;
1268 	bool working = false, scanning = false, hw_roc = false;
1269 	struct ieee80211_work *wk;
1270 	unsigned int led_trig_start = 0, led_trig_stop = 0;
1271 
1272 #ifdef CONFIG_PROVE_LOCKING
1273 	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
1274 		!lockdep_is_held(&local->iflist_mtx));
1275 #endif
1276 	lockdep_assert_held(&local->mtx);
1277 
1278 	list_for_each_entry(sdata, &local->interfaces, list) {
1279 		if (!ieee80211_sdata_running(sdata)) {
1280 			sdata->vif.bss_conf.idle = true;
1281 			continue;
1282 		}
1283 
1284 		sdata->old_idle = sdata->vif.bss_conf.idle;
1285 
1286 		/* do not count disabled managed interfaces */
1287 		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
1288 		    !sdata->u.mgd.associated) {
1289 			sdata->vif.bss_conf.idle = true;
1290 			continue;
1291 		}
1292 		/* do not count unused IBSS interfaces */
1293 		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
1294 		    !sdata->u.ibss.ssid_len) {
1295 			sdata->vif.bss_conf.idle = true;
1296 			continue;
1297 		}
1298 		/* count everything else */
1299 		count++;
1300 	}
1301 
1302 	list_for_each_entry(wk, &local->work_list, list) {
1303 		working = true;
1304 		wk->sdata->vif.bss_conf.idle = false;
1305 	}
1306 
1307 	if (local->scan_sdata) {
1308 		scanning = true;
1309 		local->scan_sdata->vif.bss_conf.idle = false;
1310 	}
1311 
1312 	if (local->hw_roc_channel)
1313 		hw_roc = true;
1314 
1315 	list_for_each_entry(sdata, &local->interfaces, list) {
1316 		if (sdata->old_idle == sdata->vif.bss_conf.idle)
1317 			continue;
1318 		if (!ieee80211_sdata_running(sdata))
1319 			continue;
1320 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
1321 	}
1322 
1323 	if (working || scanning || hw_roc)
1324 		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
1325 	else
1326 		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
1327 
1328 	if (count)
1329 		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
1330 	else
1331 		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
1332 
1333 	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
1334 
1335 	if (hw_roc)
1336 		return ieee80211_idle_off(local, "hw remain-on-channel");
1337 	if (working)
1338 		return ieee80211_idle_off(local, "working");
1339 	if (scanning)
1340 		return ieee80211_idle_off(local, "scanning");
1341 	if (!count)
1342 		return ieee80211_idle_on(local);
1343 	else
1344 		return ieee80211_idle_off(local, "in use");
1345 
1346 	return 0;
1347 }
1348 
1349 void ieee80211_recalc_idle(struct ieee80211_local *local)
1350 {
1351 	u32 chg;
1352 
1353 	mutex_lock(&local->iflist_mtx);
1354 	chg = __ieee80211_recalc_idle(local);
1355 	mutex_unlock(&local->iflist_mtx);
1356 	if (chg)
1357 		ieee80211_hw_config(local, chg);
1358 }
1359 
1360 static int netdev_notify(struct notifier_block *nb,
1361 			 unsigned long state,
1362 			 void *ndev)
1363 {
1364 	struct net_device *dev = ndev;
1365 	struct ieee80211_sub_if_data *sdata;
1366 
1367 	if (state != NETDEV_CHANGENAME)
1368 		return 0;
1369 
1370 	if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
1371 		return 0;
1372 
1373 	if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
1374 		return 0;
1375 
1376 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1377 
1378 	memcpy(sdata->name, dev->name, IFNAMSIZ);
1379 
1380 	ieee80211_debugfs_rename_netdev(sdata);
1381 	return 0;
1382 }
1383 
1384 static struct notifier_block mac80211_netdev_notifier = {
1385 	.notifier_call = netdev_notify,
1386 };
1387 
1388 int ieee80211_iface_init(void)
1389 {
1390 	return register_netdevice_notifier(&mac80211_netdev_notifier);
1391 }
1392 
1393 void ieee80211_iface_exit(void)
1394 {
1395 	unregister_netdevice_notifier(&mac80211_netdev_notifier);
1396 }
1397