xref: /openbmc/linux/net/ipv6/Kconfig (revision 14eae6e9)
1#
2# IPv6 configuration
3#
4
5#   IPv6 as module will cause a CRASH if you try to unload it
6menuconfig IPV6
7	tristate "The IPv6 protocol"
8	default m
9	---help---
10	  This is complemental support for the IP version 6.
11	  You will still be able to do traditional IPv4 networking as well.
12
13	  For general information about IPv6, see
14	  <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
15	  For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
16	  For specific information about IPv6 under Linux, read the HOWTO at
17	  <http://www.bieringer.de/linux/IPv6/>.
18
19	  To compile this protocol support as a module, choose M here: the
20	  module will be called ipv6.
21
22if IPV6
23
24config IPV6_PRIVACY
25	bool "IPv6: Privacy Extensions (RFC 3041) support"
26	---help---
27	  Privacy Extensions for Stateless Address Autoconfiguration in IPv6
28	  support.  With this option, additional periodically-altered
29	  pseudo-random global-scope unicast address(es) will be assigned to
30	  your interface(s).
31
32	  We use our standard pseudo-random algorithm to generate the
33          randomized interface identifier, instead of one described in RFC 3041.
34
35	  By default the kernel does not generate temporary addresses.
36	  To use temporary addresses, do
37
38	        echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr
39
40	  See <file:Documentation/networking/ip-sysctl.txt> for details.
41
42config IPV6_ROUTER_PREF
43	bool "IPv6: Router Preference (RFC 4191) support"
44	---help---
45	  Router Preference is an optional extension to the Router
46	  Advertisement message which improves the ability of hosts
47	  to pick an appropriate router, especially when the hosts
48	  are placed in a multi-homed network.
49
50	  If unsure, say N.
51
52config IPV6_ROUTE_INFO
53	bool "IPv6: Route Information (RFC 4191) support (EXPERIMENTAL)"
54	depends on IPV6_ROUTER_PREF && EXPERIMENTAL
55	---help---
56	  This is experimental support of Route Information.
57
58	  If unsure, say N.
59
60config IPV6_OPTIMISTIC_DAD
61	bool "IPv6: Enable RFC 4429 Optimistic DAD (EXPERIMENTAL)"
62	depends on EXPERIMENTAL
63	---help---
64	  This is experimental support for optimistic Duplicate
65	  Address Detection.  It allows for autoconfigured addresses
66	  to be used more quickly.
67
68	  If unsure, say N.
69
70config INET6_AH
71	tristate "IPv6: AH transformation"
72	select XFRM_ALGO
73	select CRYPTO
74	select CRYPTO_HMAC
75	select CRYPTO_MD5
76	select CRYPTO_SHA1
77	---help---
78	  Support for IPsec AH.
79
80	  If unsure, say Y.
81
82config INET6_ESP
83	tristate "IPv6: ESP transformation"
84	select XFRM_ALGO
85	select CRYPTO
86	select CRYPTO_AUTHENC
87	select CRYPTO_HMAC
88	select CRYPTO_MD5
89	select CRYPTO_CBC
90	select CRYPTO_SHA1
91	select CRYPTO_DES
92	---help---
93	  Support for IPsec ESP.
94
95	  If unsure, say Y.
96
97config INET6_IPCOMP
98	tristate "IPv6: IPComp transformation"
99	select INET6_XFRM_TUNNEL
100	select XFRM_IPCOMP
101	---help---
102	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
103	  typically needed for IPsec.
104
105	  If unsure, say Y.
106
107config IPV6_MIP6
108	tristate "IPv6: Mobility (EXPERIMENTAL)"
109	depends on EXPERIMENTAL
110	select XFRM
111	---help---
112	  Support for IPv6 Mobility described in RFC 3775.
113
114	  If unsure, say N.
115
116config INET6_XFRM_TUNNEL
117	tristate
118	select INET6_TUNNEL
119	default n
120
121config INET6_TUNNEL
122	tristate
123	default n
124
125config INET6_XFRM_MODE_TRANSPORT
126	tristate "IPv6: IPsec transport mode"
127	default IPV6
128	select XFRM
129	---help---
130	  Support for IPsec transport mode.
131
132	  If unsure, say Y.
133
134config INET6_XFRM_MODE_TUNNEL
135	tristate "IPv6: IPsec tunnel mode"
136	default IPV6
137	select XFRM
138	---help---
139	  Support for IPsec tunnel mode.
140
141	  If unsure, say Y.
142
143config INET6_XFRM_MODE_BEET
144	tristate "IPv6: IPsec BEET mode"
145	default IPV6
146	select XFRM
147	---help---
148	  Support for IPsec BEET mode.
149
150	  If unsure, say Y.
151
152config INET6_XFRM_MODE_ROUTEOPTIMIZATION
153	tristate "IPv6: MIPv6 route optimization mode (EXPERIMENTAL)"
154	depends on EXPERIMENTAL
155	select XFRM
156	---help---
157	  Support for MIPv6 route optimization mode.
158
159config IPV6_SIT
160	tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)"
161	select INET_TUNNEL
162	select IPV6_NDISC_NODETYPE
163	default y
164	---help---
165	  Tunneling means encapsulating data of one protocol type within
166	  another protocol and sending it over a channel that understands the
167	  encapsulating protocol. This driver implements encapsulation of IPv6
168	  into IPv4 packets. This is useful if you want to connect two IPv6
169	  networks over an IPv4-only path.
170
171	  Saying M here will produce a module called sit. If unsure, say Y.
172
173config IPV6_SIT_6RD
174	bool "IPv6: IPv6 Rapid Deployment (6RD) (EXPERIMENTAL)"
175	depends on IPV6_SIT && EXPERIMENTAL
176	default n
177	---help---
178	  IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon
179	  mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly
180	  deploy IPv6 unicast service to IPv4 sites to which it provides
181	  customer premise equipment.  Like 6to4, it utilizes stateless IPv6 in
182	  IPv4 encapsulation in order to transit IPv4-only network
183	  infrastructure.  Unlike 6to4, a 6rd service provider uses an IPv6
184	  prefix of its own in place of the fixed 6to4 prefix.
185
186	  With this option enabled, the SIT driver offers 6rd functionality by
187	  providing additional ioctl API to configure the IPv6 Prefix for in
188	  stead of static 2002::/16 for 6to4.
189
190	  If unsure, say N.
191
192config IPV6_NDISC_NODETYPE
193	bool
194
195config IPV6_TUNNEL
196	tristate "IPv6: IP-in-IPv6 tunnel (RFC2473)"
197	select INET6_TUNNEL
198	---help---
199	  Support for IPv6-in-IPv6 and IPv4-in-IPv6 tunnels described in
200	  RFC 2473.
201
202	  If unsure, say N.
203
204config IPV6_GRE
205	tristate "IPv6: GRE tunnel"
206	select IPV6_TUNNEL
207	---help---
208	  Tunneling means encapsulating data of one protocol type within
209	  another protocol and sending it over a channel that understands the
210	  encapsulating protocol. This particular tunneling driver implements
211	  GRE (Generic Routing Encapsulation) and at this time allows
212	  encapsulating of IPv4 or IPv6 over existing IPv6 infrastructure.
213	  This driver is useful if the other endpoint is a Cisco router: Cisco
214	  likes GRE much better than the other Linux tunneling driver ("IP
215	  tunneling" above). In addition, GRE allows multicast redistribution
216	  through the tunnel.
217
218	  Saying M here will produce a module called ip6_gre. If unsure, say N.
219
220config IPV6_MULTIPLE_TABLES
221	bool "IPv6: Multiple Routing Tables"
222	depends on EXPERIMENTAL
223	select FIB_RULES
224	---help---
225	  Support multiple routing tables.
226
227config IPV6_SUBTREES
228	bool "IPv6: source address based routing"
229	depends on IPV6_MULTIPLE_TABLES
230	---help---
231	  Enable routing by source address or prefix.
232
233	  The destination address is still the primary routing key, so mixing
234	  normal and source prefix specific routes in the same routing table
235	  may sometimes lead to unintended routing behavior.  This can be
236	  avoided by defining different routing tables for the normal and
237	  source prefix specific routes.
238
239	  If unsure, say N.
240
241config IPV6_MROUTE
242	bool "IPv6: multicast routing (EXPERIMENTAL)"
243	depends on IPV6 && EXPERIMENTAL
244	---help---
245	  Experimental support for IPv6 multicast forwarding.
246	  If unsure, say N.
247
248config IPV6_MROUTE_MULTIPLE_TABLES
249	bool "IPv6: multicast policy routing"
250	depends on IPV6_MROUTE
251	select FIB_RULES
252	help
253	  Normally, a multicast router runs a userspace daemon and decides
254	  what to do with a multicast packet based on the source and
255	  destination addresses. If you say Y here, the multicast router
256	  will also be able to take interfaces and packet marks into
257	  account and run multiple instances of userspace daemons
258	  simultaneously, each one handling a single table.
259
260	  If unsure, say N.
261
262config IPV6_PIMSM_V2
263	bool "IPv6: PIM-SM version 2 support (EXPERIMENTAL)"
264	depends on IPV6_MROUTE
265	---help---
266	  Support for IPv6 PIM multicast routing protocol PIM-SMv2.
267	  If unsure, say N.
268
269endif # IPV6
270