xref: /openbmc/linux/net/ethtool/plca.c (revision 17e5530a)
1 // SPDX-License-Identifier: GPL-2.0-only
2 
3 #include <linux/phy.h>
4 #include <linux/ethtool_netlink.h>
5 
6 #include "netlink.h"
7 #include "common.h"
8 
9 struct plca_req_info {
10 	struct ethnl_req_info		base;
11 };
12 
13 struct plca_reply_data {
14 	struct ethnl_reply_data		base;
15 	struct phy_plca_cfg		plca_cfg;
16 	struct phy_plca_status		plca_st;
17 };
18 
19 // Helpers ------------------------------------------------------------------ //
20 
21 #define PLCA_REPDATA(__reply_base) \
22 	container_of(__reply_base, struct plca_reply_data, base)
23 
24 // PLCA get configuration message ------------------------------------------- //
25 
26 const struct nla_policy ethnl_plca_get_cfg_policy[] = {
27 	[ETHTOOL_A_PLCA_HEADER]		=
28 		NLA_POLICY_NESTED(ethnl_header_policy),
29 };
30 
31 static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid,
32 			     bool *mod)
33 {
34 	const struct nlattr *attr = tb[attrid];
35 
36 	if (!attr ||
37 	    WARN_ON_ONCE(attrid >= ARRAY_SIZE(ethnl_plca_set_cfg_policy)))
38 		return;
39 
40 	switch (ethnl_plca_set_cfg_policy[attrid].type) {
41 	case NLA_U8:
42 		*dst = nla_get_u8(attr);
43 		break;
44 	case NLA_U32:
45 		*dst = nla_get_u32(attr);
46 		break;
47 	default:
48 		WARN_ON_ONCE(1);
49 	}
50 
51 	*mod = true;
52 }
53 
54 static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
55 				     struct ethnl_reply_data *reply_base,
56 				     const struct genl_info *info)
57 {
58 	struct plca_reply_data *data = PLCA_REPDATA(reply_base);
59 	struct net_device *dev = reply_base->dev;
60 	const struct ethtool_phy_ops *ops;
61 	int ret;
62 
63 	// check that the PHY device is available and connected
64 	if (!dev->phydev) {
65 		ret = -EOPNOTSUPP;
66 		goto out;
67 	}
68 
69 	// note: rtnl_lock is held already by ethnl_default_doit
70 	ops = ethtool_phy_ops;
71 	if (!ops || !ops->get_plca_cfg) {
72 		ret = -EOPNOTSUPP;
73 		goto out;
74 	}
75 
76 	ret = ethnl_ops_begin(dev);
77 	if (ret < 0)
78 		goto out;
79 
80 	memset(&data->plca_cfg, 0xff,
81 	       sizeof_field(struct plca_reply_data, plca_cfg));
82 
83 	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
84 	ethnl_ops_complete(dev);
85 
86 out:
87 	return ret;
88 }
89 
90 static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base,
91 				   const struct ethnl_reply_data *reply_base)
92 {
93 	return nla_total_size(sizeof(u16)) +	/* _VERSION */
94 	       nla_total_size(sizeof(u8)) +	/* _ENABLED */
95 	       nla_total_size(sizeof(u32)) +	/* _NODE_CNT */
96 	       nla_total_size(sizeof(u32)) +	/* _NODE_ID */
97 	       nla_total_size(sizeof(u32)) +	/* _TO_TIMER */
98 	       nla_total_size(sizeof(u32)) +	/* _BURST_COUNT */
99 	       nla_total_size(sizeof(u32));	/* _BURST_TIMER */
100 }
101 
102 static int plca_get_cfg_fill_reply(struct sk_buff *skb,
103 				   const struct ethnl_req_info *req_base,
104 				   const struct ethnl_reply_data *reply_base)
105 {
106 	const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
107 	const struct phy_plca_cfg *plca = &data->plca_cfg;
108 
109 	if ((plca->version >= 0 &&
110 	     nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) ||
111 	    (plca->enabled >= 0 &&
112 	     nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) ||
113 	    (plca->node_id >= 0 &&
114 	     nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) ||
115 	    (plca->node_cnt >= 0 &&
116 	     nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) ||
117 	    (plca->to_tmr >= 0 &&
118 	     nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) ||
119 	    (plca->burst_cnt >= 0 &&
120 	     nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) ||
121 	    (plca->burst_tmr >= 0 &&
122 	     nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr)))
123 		return -EMSGSIZE;
124 
125 	return 0;
126 };
127 
128 // PLCA set configuration message ------------------------------------------- //
129 
130 const struct nla_policy ethnl_plca_set_cfg_policy[] = {
131 	[ETHTOOL_A_PLCA_HEADER]		=
132 		NLA_POLICY_NESTED(ethnl_header_policy),
133 	[ETHTOOL_A_PLCA_ENABLED]	= NLA_POLICY_MAX(NLA_U8, 1),
134 	[ETHTOOL_A_PLCA_NODE_ID]	= NLA_POLICY_MAX(NLA_U32, 255),
135 	[ETHTOOL_A_PLCA_NODE_CNT]	= NLA_POLICY_RANGE(NLA_U32, 1, 255),
136 	[ETHTOOL_A_PLCA_TO_TMR]		= NLA_POLICY_MAX(NLA_U32, 255),
137 	[ETHTOOL_A_PLCA_BURST_CNT]	= NLA_POLICY_MAX(NLA_U32, 255),
138 	[ETHTOOL_A_PLCA_BURST_TMR]	= NLA_POLICY_MAX(NLA_U32, 255),
139 };
140 
141 static int
142 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
143 {
144 	struct net_device *dev = req_info->dev;
145 	const struct ethtool_phy_ops *ops;
146 	struct nlattr **tb = info->attrs;
147 	struct phy_plca_cfg plca_cfg;
148 	bool mod = false;
149 	int ret;
150 
151 	// check that the PHY device is available and connected
152 	if (!dev->phydev)
153 		return -EOPNOTSUPP;
154 
155 	ops = ethtool_phy_ops;
156 	if (!ops || !ops->set_plca_cfg)
157 		return -EOPNOTSUPP;
158 
159 	memset(&plca_cfg, 0xff, sizeof(plca_cfg));
160 	plca_update_sint(&plca_cfg.enabled, tb, ETHTOOL_A_PLCA_ENABLED, &mod);
161 	plca_update_sint(&plca_cfg.node_id, tb, ETHTOOL_A_PLCA_NODE_ID, &mod);
162 	plca_update_sint(&plca_cfg.node_cnt, tb, ETHTOOL_A_PLCA_NODE_CNT, &mod);
163 	plca_update_sint(&plca_cfg.to_tmr, tb, ETHTOOL_A_PLCA_TO_TMR, &mod);
164 	plca_update_sint(&plca_cfg.burst_cnt, tb, ETHTOOL_A_PLCA_BURST_CNT,
165 			 &mod);
166 	plca_update_sint(&plca_cfg.burst_tmr, tb, ETHTOOL_A_PLCA_BURST_TMR,
167 			 &mod);
168 	if (!mod)
169 		return 0;
170 
171 	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
172 	return ret < 0 ? ret : 1;
173 }
174 
175 const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
176 	.request_cmd		= ETHTOOL_MSG_PLCA_GET_CFG,
177 	.reply_cmd		= ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
178 	.hdr_attr		= ETHTOOL_A_PLCA_HEADER,
179 	.req_info_size		= sizeof(struct plca_req_info),
180 	.reply_data_size	= sizeof(struct plca_reply_data),
181 
182 	.prepare_data		= plca_get_cfg_prepare_data,
183 	.reply_size		= plca_get_cfg_reply_size,
184 	.fill_reply		= plca_get_cfg_fill_reply,
185 
186 	.set			= ethnl_set_plca,
187 	.set_ntf_cmd		= ETHTOOL_MSG_PLCA_NTF,
188 };
189 
190 // PLCA get status message -------------------------------------------------- //
191 
192 const struct nla_policy ethnl_plca_get_status_policy[] = {
193 	[ETHTOOL_A_PLCA_HEADER]		=
194 		NLA_POLICY_NESTED(ethnl_header_policy),
195 };
196 
197 static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
198 					struct ethnl_reply_data *reply_base,
199 					const struct genl_info *info)
200 {
201 	struct plca_reply_data *data = PLCA_REPDATA(reply_base);
202 	struct net_device *dev = reply_base->dev;
203 	const struct ethtool_phy_ops *ops;
204 	int ret;
205 
206 	// check that the PHY device is available and connected
207 	if (!dev->phydev) {
208 		ret = -EOPNOTSUPP;
209 		goto out;
210 	}
211 
212 	// note: rtnl_lock is held already by ethnl_default_doit
213 	ops = ethtool_phy_ops;
214 	if (!ops || !ops->get_plca_status) {
215 		ret = -EOPNOTSUPP;
216 		goto out;
217 	}
218 
219 	ret = ethnl_ops_begin(dev);
220 	if (ret < 0)
221 		goto out;
222 
223 	memset(&data->plca_st, 0xff,
224 	       sizeof_field(struct plca_reply_data, plca_st));
225 
226 	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
227 	ethnl_ops_complete(dev);
228 out:
229 	return ret;
230 }
231 
232 static int plca_get_status_reply_size(const struct ethnl_req_info *req_base,
233 				      const struct ethnl_reply_data *reply_base)
234 {
235 	return nla_total_size(sizeof(u8));	/* _STATUS */
236 }
237 
238 static int plca_get_status_fill_reply(struct sk_buff *skb,
239 				      const struct ethnl_req_info *req_base,
240 				      const struct ethnl_reply_data *reply_base)
241 {
242 	const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
243 	const u8 status = data->plca_st.pst;
244 
245 	if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status))
246 		return -EMSGSIZE;
247 
248 	return 0;
249 };
250 
251 const struct ethnl_request_ops ethnl_plca_status_request_ops = {
252 	.request_cmd		= ETHTOOL_MSG_PLCA_GET_STATUS,
253 	.reply_cmd		= ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
254 	.hdr_attr		= ETHTOOL_A_PLCA_HEADER,
255 	.req_info_size		= sizeof(struct plca_req_info),
256 	.reply_data_size	= sizeof(struct plca_reply_data),
257 
258 	.prepare_data		= plca_get_status_prepare_data,
259 	.reply_size		= plca_get_status_reply_size,
260 	.fill_reply		= plca_get_status_fill_reply,
261 };
262