1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Userspace interface 4 * Linux ethernet bridge 5 * 6 * Authors: 7 * Lennert Buytenhek <buytenh@gnu.org> 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/netdevice.h> 12 #include <linux/etherdevice.h> 13 #include <linux/netpoll.h> 14 #include <linux/ethtool.h> 15 #include <linux/if_arp.h> 16 #include <linux/module.h> 17 #include <linux/init.h> 18 #include <linux/rtnetlink.h> 19 #include <linux/if_ether.h> 20 #include <linux/slab.h> 21 #include <net/dsa.h> 22 #include <net/sock.h> 23 #include <linux/if_vlan.h> 24 #include <net/switchdev.h> 25 #include <net/net_namespace.h> 26 27 #include "br_private.h" 28 29 /* 30 * Determine initial path cost based on speed. 31 * using recommendations from 802.1d standard 32 * 33 * Since driver might sleep need to not be holding any locks. 34 */ 35 static int port_cost(struct net_device *dev) 36 { 37 struct ethtool_link_ksettings ecmd; 38 39 if (!__ethtool_get_link_ksettings(dev, &ecmd)) { 40 switch (ecmd.base.speed) { 41 case SPEED_10000: 42 return 2; 43 case SPEED_1000: 44 return 4; 45 case SPEED_100: 46 return 19; 47 case SPEED_10: 48 return 100; 49 } 50 } 51 52 /* Old silly heuristics based on name */ 53 if (!strncmp(dev->name, "lec", 3)) 54 return 7; 55 56 if (!strncmp(dev->name, "plip", 4)) 57 return 2500; 58 59 return 100; /* assume old 10Mbps */ 60 } 61 62 63 /* Check for port carrier transitions. */ 64 void br_port_carrier_check(struct net_bridge_port *p, bool *notified) 65 { 66 struct net_device *dev = p->dev; 67 struct net_bridge *br = p->br; 68 69 if (!(p->flags & BR_ADMIN_COST) && 70 netif_running(dev) && netif_oper_up(dev)) 71 p->path_cost = port_cost(dev); 72 73 *notified = false; 74 if (!netif_running(br->dev)) 75 return; 76 77 spin_lock_bh(&br->lock); 78 if (netif_running(dev) && netif_oper_up(dev)) { 79 if (p->state == BR_STATE_DISABLED) { 80 br_stp_enable_port(p); 81 *notified = true; 82 } 83 } else { 84 if (p->state != BR_STATE_DISABLED) { 85 br_stp_disable_port(p); 86 *notified = true; 87 } 88 } 89 spin_unlock_bh(&br->lock); 90 } 91 92 static void br_port_set_promisc(struct net_bridge_port *p) 93 { 94 int err = 0; 95 96 if (br_promisc_port(p)) 97 return; 98 99 err = dev_set_promiscuity(p->dev, 1); 100 if (err) 101 return; 102 103 br_fdb_unsync_static(p->br, p); 104 p->flags |= BR_PROMISC; 105 } 106 107 static void br_port_clear_promisc(struct net_bridge_port *p) 108 { 109 int err; 110 111 /* Check if the port is already non-promisc or if it doesn't 112 * support UNICAST filtering. Without unicast filtering support 113 * we'll end up re-enabling promisc mode anyway, so just check for 114 * it here. 115 */ 116 if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT)) 117 return; 118 119 /* Since we'll be clearing the promisc mode, program the port 120 * first so that we don't have interruption in traffic. 121 */ 122 err = br_fdb_sync_static(p->br, p); 123 if (err) 124 return; 125 126 dev_set_promiscuity(p->dev, -1); 127 p->flags &= ~BR_PROMISC; 128 } 129 130 /* When a port is added or removed or when certain port flags 131 * change, this function is called to automatically manage 132 * promiscuity setting of all the bridge ports. We are always called 133 * under RTNL so can skip using rcu primitives. 134 */ 135 void br_manage_promisc(struct net_bridge *br) 136 { 137 struct net_bridge_port *p; 138 bool set_all = false; 139 140 /* If vlan filtering is disabled or bridge interface is placed 141 * into promiscuous mode, place all ports in promiscuous mode. 142 */ 143 if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br->dev)) 144 set_all = true; 145 146 list_for_each_entry(p, &br->port_list, list) { 147 if (set_all) { 148 br_port_set_promisc(p); 149 } else { 150 /* If the number of auto-ports is <= 1, then all other 151 * ports will have their output configuration 152 * statically specified through fdbs. Since ingress 153 * on the auto-port becomes forwarding/egress to other 154 * ports and egress configuration is statically known, 155 * we can say that ingress configuration of the 156 * auto-port is also statically known. 157 * This lets us disable promiscuous mode and write 158 * this config to hw. 159 */ 160 if (br->auto_cnt == 0 || 161 (br->auto_cnt == 1 && br_auto_port(p))) 162 br_port_clear_promisc(p); 163 else 164 br_port_set_promisc(p); 165 } 166 } 167 } 168 169 int nbp_backup_change(struct net_bridge_port *p, 170 struct net_device *backup_dev) 171 { 172 struct net_bridge_port *old_backup = rtnl_dereference(p->backup_port); 173 struct net_bridge_port *backup_p = NULL; 174 175 ASSERT_RTNL(); 176 177 if (backup_dev) { 178 if (!netif_is_bridge_port(backup_dev)) 179 return -ENOENT; 180 181 backup_p = br_port_get_rtnl(backup_dev); 182 if (backup_p->br != p->br) 183 return -EINVAL; 184 } 185 186 if (p == backup_p) 187 return -EINVAL; 188 189 if (old_backup == backup_p) 190 return 0; 191 192 /* if the backup link is already set, clear it */ 193 if (old_backup) 194 old_backup->backup_redirected_cnt--; 195 196 if (backup_p) 197 backup_p->backup_redirected_cnt++; 198 rcu_assign_pointer(p->backup_port, backup_p); 199 200 return 0; 201 } 202 203 static void nbp_backup_clear(struct net_bridge_port *p) 204 { 205 nbp_backup_change(p, NULL); 206 if (p->backup_redirected_cnt) { 207 struct net_bridge_port *cur_p; 208 209 list_for_each_entry(cur_p, &p->br->port_list, list) { 210 struct net_bridge_port *backup_p; 211 212 backup_p = rtnl_dereference(cur_p->backup_port); 213 if (backup_p == p) 214 nbp_backup_change(cur_p, NULL); 215 } 216 } 217 218 WARN_ON(rcu_access_pointer(p->backup_port) || p->backup_redirected_cnt); 219 } 220 221 static void nbp_update_port_count(struct net_bridge *br) 222 { 223 struct net_bridge_port *p; 224 u32 cnt = 0; 225 226 list_for_each_entry(p, &br->port_list, list) { 227 if (br_auto_port(p)) 228 cnt++; 229 } 230 if (br->auto_cnt != cnt) { 231 br->auto_cnt = cnt; 232 br_manage_promisc(br); 233 } 234 } 235 236 static void nbp_delete_promisc(struct net_bridge_port *p) 237 { 238 /* If port is currently promiscuous, unset promiscuity. 239 * Otherwise, it is a static port so remove all addresses 240 * from it. 241 */ 242 dev_set_allmulti(p->dev, -1); 243 if (br_promisc_port(p)) 244 dev_set_promiscuity(p->dev, -1); 245 else 246 br_fdb_unsync_static(p->br, p); 247 } 248 249 static void release_nbp(struct kobject *kobj) 250 { 251 struct net_bridge_port *p 252 = container_of(kobj, struct net_bridge_port, kobj); 253 kfree(p); 254 } 255 256 static void brport_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid) 257 { 258 struct net_bridge_port *p = kobj_to_brport(kobj); 259 260 net_ns_get_ownership(dev_net(p->dev), uid, gid); 261 } 262 263 static struct kobj_type brport_ktype = { 264 #ifdef CONFIG_SYSFS 265 .sysfs_ops = &brport_sysfs_ops, 266 #endif 267 .release = release_nbp, 268 .get_ownership = brport_get_ownership, 269 }; 270 271 static void destroy_nbp(struct net_bridge_port *p) 272 { 273 struct net_device *dev = p->dev; 274 275 p->br = NULL; 276 p->dev = NULL; 277 dev_put(dev); 278 279 kobject_put(&p->kobj); 280 } 281 282 static void destroy_nbp_rcu(struct rcu_head *head) 283 { 284 struct net_bridge_port *p = 285 container_of(head, struct net_bridge_port, rcu); 286 destroy_nbp(p); 287 } 288 289 static unsigned get_max_headroom(struct net_bridge *br) 290 { 291 unsigned max_headroom = 0; 292 struct net_bridge_port *p; 293 294 list_for_each_entry(p, &br->port_list, list) { 295 unsigned dev_headroom = netdev_get_fwd_headroom(p->dev); 296 297 if (dev_headroom > max_headroom) 298 max_headroom = dev_headroom; 299 } 300 301 return max_headroom; 302 } 303 304 static void update_headroom(struct net_bridge *br, int new_hr) 305 { 306 struct net_bridge_port *p; 307 308 list_for_each_entry(p, &br->port_list, list) 309 netdev_set_rx_headroom(p->dev, new_hr); 310 311 br->dev->needed_headroom = new_hr; 312 } 313 314 /* Delete port(interface) from bridge is done in two steps. 315 * via RCU. First step, marks device as down. That deletes 316 * all the timers and stops new packets from flowing through. 317 * 318 * Final cleanup doesn't occur until after all CPU's finished 319 * processing packets. 320 * 321 * Protected from multiple admin operations by RTNL mutex 322 */ 323 static void del_nbp(struct net_bridge_port *p) 324 { 325 struct net_bridge *br = p->br; 326 struct net_device *dev = p->dev; 327 328 sysfs_remove_link(br->ifobj, p->dev->name); 329 330 nbp_delete_promisc(p); 331 332 spin_lock_bh(&br->lock); 333 br_stp_disable_port(p); 334 spin_unlock_bh(&br->lock); 335 336 br_mrp_port_del(br, p); 337 338 br_ifinfo_notify(RTM_DELLINK, NULL, p); 339 340 list_del_rcu(&p->list); 341 if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom) 342 update_headroom(br, get_max_headroom(br)); 343 netdev_reset_rx_headroom(dev); 344 345 nbp_vlan_flush(p); 346 br_fdb_delete_by_port(br, p, 0, 1); 347 switchdev_deferred_process(); 348 nbp_backup_clear(p); 349 350 nbp_update_port_count(br); 351 352 netdev_upper_dev_unlink(dev, br->dev); 353 354 dev->priv_flags &= ~IFF_BRIDGE_PORT; 355 356 netdev_rx_handler_unregister(dev); 357 358 br_multicast_del_port(p); 359 360 kobject_uevent(&p->kobj, KOBJ_REMOVE); 361 kobject_del(&p->kobj); 362 363 br_netpoll_disable(p); 364 365 call_rcu(&p->rcu, destroy_nbp_rcu); 366 } 367 368 /* Delete bridge device */ 369 void br_dev_delete(struct net_device *dev, struct list_head *head) 370 { 371 struct net_bridge *br = netdev_priv(dev); 372 struct net_bridge_port *p, *n; 373 374 list_for_each_entry_safe(p, n, &br->port_list, list) { 375 del_nbp(p); 376 } 377 378 br_recalculate_neigh_suppress_enabled(br); 379 380 br_fdb_delete_by_port(br, NULL, 0, 1); 381 382 cancel_delayed_work_sync(&br->gc_work); 383 384 br_sysfs_delbr(br->dev); 385 unregister_netdevice_queue(br->dev, head); 386 } 387 388 /* find an available port number */ 389 static int find_portno(struct net_bridge *br) 390 { 391 int index; 392 struct net_bridge_port *p; 393 unsigned long *inuse; 394 395 inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL); 396 if (!inuse) 397 return -ENOMEM; 398 399 set_bit(0, inuse); /* zero is reserved */ 400 list_for_each_entry(p, &br->port_list, list) { 401 set_bit(p->port_no, inuse); 402 } 403 index = find_first_zero_bit(inuse, BR_MAX_PORTS); 404 bitmap_free(inuse); 405 406 return (index >= BR_MAX_PORTS) ? -EXFULL : index; 407 } 408 409 /* called with RTNL but without bridge lock */ 410 static struct net_bridge_port *new_nbp(struct net_bridge *br, 411 struct net_device *dev) 412 { 413 struct net_bridge_port *p; 414 int index, err; 415 416 index = find_portno(br); 417 if (index < 0) 418 return ERR_PTR(index); 419 420 p = kzalloc(sizeof(*p), GFP_KERNEL); 421 if (p == NULL) 422 return ERR_PTR(-ENOMEM); 423 424 p->br = br; 425 dev_hold(dev); 426 p->dev = dev; 427 p->path_cost = port_cost(dev); 428 p->priority = 0x8000 >> BR_PORT_BITS; 429 p->port_no = index; 430 p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD; 431 br_init_port(p); 432 br_set_state(p, BR_STATE_DISABLED); 433 br_stp_port_timer_init(p); 434 err = br_multicast_add_port(p); 435 if (err) { 436 dev_put(dev); 437 kfree(p); 438 p = ERR_PTR(err); 439 } 440 441 return p; 442 } 443 444 int br_add_bridge(struct net *net, const char *name) 445 { 446 struct net_device *dev; 447 int res; 448 449 dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN, 450 br_dev_setup); 451 452 if (!dev) 453 return -ENOMEM; 454 455 dev_net_set(dev, net); 456 dev->rtnl_link_ops = &br_link_ops; 457 458 res = register_netdev(dev); 459 if (res) 460 free_netdev(dev); 461 return res; 462 } 463 464 int br_del_bridge(struct net *net, const char *name) 465 { 466 struct net_device *dev; 467 int ret = 0; 468 469 rtnl_lock(); 470 dev = __dev_get_by_name(net, name); 471 if (dev == NULL) 472 ret = -ENXIO; /* Could not find device */ 473 474 else if (!(dev->priv_flags & IFF_EBRIDGE)) { 475 /* Attempt to delete non bridge device! */ 476 ret = -EPERM; 477 } 478 479 else if (dev->flags & IFF_UP) { 480 /* Not shutdown yet. */ 481 ret = -EBUSY; 482 } 483 484 else 485 br_dev_delete(dev, NULL); 486 487 rtnl_unlock(); 488 return ret; 489 } 490 491 /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */ 492 static int br_mtu_min(const struct net_bridge *br) 493 { 494 const struct net_bridge_port *p; 495 int ret_mtu = 0; 496 497 list_for_each_entry(p, &br->port_list, list) 498 if (!ret_mtu || ret_mtu > p->dev->mtu) 499 ret_mtu = p->dev->mtu; 500 501 return ret_mtu ? ret_mtu : ETH_DATA_LEN; 502 } 503 504 void br_mtu_auto_adjust(struct net_bridge *br) 505 { 506 ASSERT_RTNL(); 507 508 /* if the bridge MTU was manually configured don't mess with it */ 509 if (br_opt_get(br, BROPT_MTU_SET_BY_USER)) 510 return; 511 512 /* change to the minimum MTU and clear the flag which was set by 513 * the bridge ndo_change_mtu callback 514 */ 515 dev_set_mtu(br->dev, br_mtu_min(br)); 516 br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false); 517 } 518 519 static void br_set_gso_limits(struct net_bridge *br) 520 { 521 unsigned int gso_max_size = GSO_MAX_SIZE; 522 u16 gso_max_segs = GSO_MAX_SEGS; 523 const struct net_bridge_port *p; 524 525 list_for_each_entry(p, &br->port_list, list) { 526 gso_max_size = min(gso_max_size, p->dev->gso_max_size); 527 gso_max_segs = min(gso_max_segs, p->dev->gso_max_segs); 528 } 529 br->dev->gso_max_size = gso_max_size; 530 br->dev->gso_max_segs = gso_max_segs; 531 } 532 533 /* 534 * Recomputes features using slave's features 535 */ 536 netdev_features_t br_features_recompute(struct net_bridge *br, 537 netdev_features_t features) 538 { 539 struct net_bridge_port *p; 540 netdev_features_t mask; 541 542 if (list_empty(&br->port_list)) 543 return features; 544 545 mask = features; 546 features &= ~NETIF_F_ONE_FOR_ALL; 547 548 list_for_each_entry(p, &br->port_list, list) { 549 features = netdev_increment_features(features, 550 p->dev->features, mask); 551 } 552 features = netdev_add_tso_features(features, mask); 553 554 return features; 555 } 556 557 /* called with RTNL */ 558 int br_add_if(struct net_bridge *br, struct net_device *dev, 559 struct netlink_ext_ack *extack) 560 { 561 struct net_bridge_port *p; 562 int err = 0; 563 unsigned br_hr, dev_hr; 564 bool changed_addr; 565 566 /* Don't allow bridging non-ethernet like devices. */ 567 if ((dev->flags & IFF_LOOPBACK) || 568 dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN || 569 !is_valid_ether_addr(dev->dev_addr)) 570 return -EINVAL; 571 572 /* Also don't allow bridging of net devices that are DSA masters, since 573 * the bridge layer rx_handler prevents the DSA fake ethertype handler 574 * to be invoked, so we don't get the chance to strip off and parse the 575 * DSA switch tag protocol header (the bridge layer just returns 576 * RX_HANDLER_CONSUMED, stopping RX processing for these frames). 577 * The only case where that would not be an issue is when bridging can 578 * already be offloaded, such as when the DSA master is itself a DSA 579 * or plain switchdev port, and is bridged only with other ports from 580 * the same hardware device. 581 */ 582 if (netdev_uses_dsa(dev)) { 583 list_for_each_entry(p, &br->port_list, list) { 584 if (!netdev_port_same_parent_id(dev, p->dev)) { 585 NL_SET_ERR_MSG(extack, 586 "Cannot do software bridging with a DSA master"); 587 return -EINVAL; 588 } 589 } 590 } 591 592 /* No bridging of bridges */ 593 if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) { 594 NL_SET_ERR_MSG(extack, 595 "Can not enslave a bridge to a bridge"); 596 return -ELOOP; 597 } 598 599 /* Device has master upper dev */ 600 if (netdev_master_upper_dev_get(dev)) 601 return -EBUSY; 602 603 /* No bridging devices that dislike that (e.g. wireless) */ 604 if (dev->priv_flags & IFF_DONT_BRIDGE) { 605 NL_SET_ERR_MSG(extack, 606 "Device does not allow enslaving to a bridge"); 607 return -EOPNOTSUPP; 608 } 609 610 p = new_nbp(br, dev); 611 if (IS_ERR(p)) 612 return PTR_ERR(p); 613 614 call_netdevice_notifiers(NETDEV_JOIN, dev); 615 616 err = dev_set_allmulti(dev, 1); 617 if (err) { 618 kfree(p); /* kobject not yet init'd, manually free */ 619 goto err1; 620 } 621 622 err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj), 623 SYSFS_BRIDGE_PORT_ATTR); 624 if (err) 625 goto err2; 626 627 err = br_sysfs_addif(p); 628 if (err) 629 goto err2; 630 631 err = br_netpoll_enable(p); 632 if (err) 633 goto err3; 634 635 err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p); 636 if (err) 637 goto err4; 638 639 dev->priv_flags |= IFF_BRIDGE_PORT; 640 641 err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL, extack); 642 if (err) 643 goto err5; 644 645 err = nbp_switchdev_mark_set(p); 646 if (err) 647 goto err6; 648 649 dev_disable_lro(dev); 650 651 list_add_rcu(&p->list, &br->port_list); 652 653 nbp_update_port_count(br); 654 655 netdev_update_features(br->dev); 656 657 br_hr = br->dev->needed_headroom; 658 dev_hr = netdev_get_fwd_headroom(dev); 659 if (br_hr < dev_hr) 660 update_headroom(br, dev_hr); 661 else 662 netdev_set_rx_headroom(dev, br_hr); 663 664 if (br_fdb_insert(br, p, dev->dev_addr, 0)) 665 netdev_err(dev, "failed insert local address bridge forwarding table\n"); 666 667 if (br->dev->addr_assign_type != NET_ADDR_SET) { 668 /* Ask for permission to use this MAC address now, even if we 669 * don't end up choosing it below. 670 */ 671 err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack); 672 if (err) 673 goto err7; 674 } 675 676 err = nbp_vlan_init(p, extack); 677 if (err) { 678 netdev_err(dev, "failed to initialize vlan filtering on this port\n"); 679 goto err7; 680 } 681 682 spin_lock_bh(&br->lock); 683 changed_addr = br_stp_recalculate_bridge_id(br); 684 685 if (netif_running(dev) && netif_oper_up(dev) && 686 (br->dev->flags & IFF_UP)) 687 br_stp_enable_port(p); 688 spin_unlock_bh(&br->lock); 689 690 br_ifinfo_notify(RTM_NEWLINK, NULL, p); 691 692 if (changed_addr) 693 call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); 694 695 br_mtu_auto_adjust(br); 696 br_set_gso_limits(br); 697 698 kobject_uevent(&p->kobj, KOBJ_ADD); 699 700 return 0; 701 702 err7: 703 list_del_rcu(&p->list); 704 br_fdb_delete_by_port(br, p, 0, 1); 705 nbp_update_port_count(br); 706 err6: 707 netdev_upper_dev_unlink(dev, br->dev); 708 err5: 709 dev->priv_flags &= ~IFF_BRIDGE_PORT; 710 netdev_rx_handler_unregister(dev); 711 err4: 712 br_netpoll_disable(p); 713 err3: 714 sysfs_remove_link(br->ifobj, p->dev->name); 715 err2: 716 kobject_put(&p->kobj); 717 dev_set_allmulti(dev, -1); 718 err1: 719 dev_put(dev); 720 return err; 721 } 722 723 /* called with RTNL */ 724 int br_del_if(struct net_bridge *br, struct net_device *dev) 725 { 726 struct net_bridge_port *p; 727 bool changed_addr; 728 729 p = br_port_get_rtnl(dev); 730 if (!p || p->br != br) 731 return -EINVAL; 732 733 /* Since more than one interface can be attached to a bridge, 734 * there still maybe an alternate path for netconsole to use; 735 * therefore there is no reason for a NETDEV_RELEASE event. 736 */ 737 del_nbp(p); 738 739 br_mtu_auto_adjust(br); 740 br_set_gso_limits(br); 741 742 spin_lock_bh(&br->lock); 743 changed_addr = br_stp_recalculate_bridge_id(br); 744 spin_unlock_bh(&br->lock); 745 746 if (changed_addr) 747 call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); 748 749 netdev_update_features(br->dev); 750 751 return 0; 752 } 753 754 void br_port_flags_change(struct net_bridge_port *p, unsigned long mask) 755 { 756 struct net_bridge *br = p->br; 757 758 if (mask & BR_AUTO_MASK) 759 nbp_update_port_count(br); 760 761 if (mask & BR_NEIGH_SUPPRESS) 762 br_recalculate_neigh_suppress_enabled(br); 763 } 764 765 bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag) 766 { 767 struct net_bridge_port *p; 768 769 p = br_port_get_rtnl_rcu(dev); 770 if (!p) 771 return false; 772 773 return p->flags & flag; 774 } 775 EXPORT_SYMBOL_GPL(br_port_flag_is_set); 776