xref: /openbmc/linux/net/bridge/br_if.c (revision 8dde5715)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	Userspace interface
4  *	Linux ethernet bridge
5  *
6  *	Authors:
7  *	Lennert Buytenhek		<buytenh@gnu.org>
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/netdevice.h>
12 #include <linux/etherdevice.h>
13 #include <linux/netpoll.h>
14 #include <linux/ethtool.h>
15 #include <linux/if_arp.h>
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/rtnetlink.h>
19 #include <linux/if_ether.h>
20 #include <linux/slab.h>
21 #include <net/dsa.h>
22 #include <net/sock.h>
23 #include <linux/if_vlan.h>
24 #include <net/switchdev.h>
25 #include <net/net_namespace.h>
26 
27 #include "br_private.h"
28 
29 /*
30  * Determine initial path cost based on speed.
31  * using recommendations from 802.1d standard
32  *
33  * Since driver might sleep need to not be holding any locks.
34  */
35 static int port_cost(struct net_device *dev)
36 {
37 	struct ethtool_link_ksettings ecmd;
38 
39 	if (!__ethtool_get_link_ksettings(dev, &ecmd)) {
40 		switch (ecmd.base.speed) {
41 		case SPEED_10000:
42 			return 2;
43 		case SPEED_1000:
44 			return 4;
45 		case SPEED_100:
46 			return 19;
47 		case SPEED_10:
48 			return 100;
49 		}
50 	}
51 
52 	/* Old silly heuristics based on name */
53 	if (!strncmp(dev->name, "lec", 3))
54 		return 7;
55 
56 	if (!strncmp(dev->name, "plip", 4))
57 		return 2500;
58 
59 	return 100;	/* assume old 10Mbps */
60 }
61 
62 
63 /* Check for port carrier transitions. */
64 void br_port_carrier_check(struct net_bridge_port *p, bool *notified)
65 {
66 	struct net_device *dev = p->dev;
67 	struct net_bridge *br = p->br;
68 
69 	if (!(p->flags & BR_ADMIN_COST) &&
70 	    netif_running(dev) && netif_oper_up(dev))
71 		p->path_cost = port_cost(dev);
72 
73 	*notified = false;
74 	if (!netif_running(br->dev))
75 		return;
76 
77 	spin_lock_bh(&br->lock);
78 	if (netif_running(dev) && netif_oper_up(dev)) {
79 		if (p->state == BR_STATE_DISABLED) {
80 			br_stp_enable_port(p);
81 			*notified = true;
82 		}
83 	} else {
84 		if (p->state != BR_STATE_DISABLED) {
85 			br_stp_disable_port(p);
86 			*notified = true;
87 		}
88 	}
89 	spin_unlock_bh(&br->lock);
90 }
91 
92 static void br_port_set_promisc(struct net_bridge_port *p)
93 {
94 	int err = 0;
95 
96 	if (br_promisc_port(p))
97 		return;
98 
99 	err = dev_set_promiscuity(p->dev, 1);
100 	if (err)
101 		return;
102 
103 	br_fdb_unsync_static(p->br, p);
104 	p->flags |= BR_PROMISC;
105 }
106 
107 static void br_port_clear_promisc(struct net_bridge_port *p)
108 {
109 	int err;
110 
111 	/* Check if the port is already non-promisc or if it doesn't
112 	 * support UNICAST filtering.  Without unicast filtering support
113 	 * we'll end up re-enabling promisc mode anyway, so just check for
114 	 * it here.
115 	 */
116 	if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
117 		return;
118 
119 	/* Since we'll be clearing the promisc mode, program the port
120 	 * first so that we don't have interruption in traffic.
121 	 */
122 	err = br_fdb_sync_static(p->br, p);
123 	if (err)
124 		return;
125 
126 	dev_set_promiscuity(p->dev, -1);
127 	p->flags &= ~BR_PROMISC;
128 }
129 
130 /* When a port is added or removed or when certain port flags
131  * change, this function is called to automatically manage
132  * promiscuity setting of all the bridge ports.  We are always called
133  * under RTNL so can skip using rcu primitives.
134  */
135 void br_manage_promisc(struct net_bridge *br)
136 {
137 	struct net_bridge_port *p;
138 	bool set_all = false;
139 
140 	/* If vlan filtering is disabled or bridge interface is placed
141 	 * into promiscuous mode, place all ports in promiscuous mode.
142 	 */
143 	if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br->dev))
144 		set_all = true;
145 
146 	list_for_each_entry(p, &br->port_list, list) {
147 		if (set_all) {
148 			br_port_set_promisc(p);
149 		} else {
150 			/* If the number of auto-ports is <= 1, then all other
151 			 * ports will have their output configuration
152 			 * statically specified through fdbs.  Since ingress
153 			 * on the auto-port becomes forwarding/egress to other
154 			 * ports and egress configuration is statically known,
155 			 * we can say that ingress configuration of the
156 			 * auto-port is also statically known.
157 			 * This lets us disable promiscuous mode and write
158 			 * this config to hw.
159 			 */
160 			if (br->auto_cnt == 0 ||
161 			    (br->auto_cnt == 1 && br_auto_port(p)))
162 				br_port_clear_promisc(p);
163 			else
164 				br_port_set_promisc(p);
165 		}
166 	}
167 }
168 
169 int nbp_backup_change(struct net_bridge_port *p,
170 		      struct net_device *backup_dev)
171 {
172 	struct net_bridge_port *old_backup = rtnl_dereference(p->backup_port);
173 	struct net_bridge_port *backup_p = NULL;
174 
175 	ASSERT_RTNL();
176 
177 	if (backup_dev) {
178 		if (!netif_is_bridge_port(backup_dev))
179 			return -ENOENT;
180 
181 		backup_p = br_port_get_rtnl(backup_dev);
182 		if (backup_p->br != p->br)
183 			return -EINVAL;
184 	}
185 
186 	if (p == backup_p)
187 		return -EINVAL;
188 
189 	if (old_backup == backup_p)
190 		return 0;
191 
192 	/* if the backup link is already set, clear it */
193 	if (old_backup)
194 		old_backup->backup_redirected_cnt--;
195 
196 	if (backup_p)
197 		backup_p->backup_redirected_cnt++;
198 	rcu_assign_pointer(p->backup_port, backup_p);
199 
200 	return 0;
201 }
202 
203 static void nbp_backup_clear(struct net_bridge_port *p)
204 {
205 	nbp_backup_change(p, NULL);
206 	if (p->backup_redirected_cnt) {
207 		struct net_bridge_port *cur_p;
208 
209 		list_for_each_entry(cur_p, &p->br->port_list, list) {
210 			struct net_bridge_port *backup_p;
211 
212 			backup_p = rtnl_dereference(cur_p->backup_port);
213 			if (backup_p == p)
214 				nbp_backup_change(cur_p, NULL);
215 		}
216 	}
217 
218 	WARN_ON(rcu_access_pointer(p->backup_port) || p->backup_redirected_cnt);
219 }
220 
221 static void nbp_update_port_count(struct net_bridge *br)
222 {
223 	struct net_bridge_port *p;
224 	u32 cnt = 0;
225 
226 	list_for_each_entry(p, &br->port_list, list) {
227 		if (br_auto_port(p))
228 			cnt++;
229 	}
230 	if (br->auto_cnt != cnt) {
231 		br->auto_cnt = cnt;
232 		br_manage_promisc(br);
233 	}
234 }
235 
236 static void nbp_delete_promisc(struct net_bridge_port *p)
237 {
238 	/* If port is currently promiscuous, unset promiscuity.
239 	 * Otherwise, it is a static port so remove all addresses
240 	 * from it.
241 	 */
242 	dev_set_allmulti(p->dev, -1);
243 	if (br_promisc_port(p))
244 		dev_set_promiscuity(p->dev, -1);
245 	else
246 		br_fdb_unsync_static(p->br, p);
247 }
248 
249 static void release_nbp(struct kobject *kobj)
250 {
251 	struct net_bridge_port *p
252 		= container_of(kobj, struct net_bridge_port, kobj);
253 	kfree(p);
254 }
255 
256 static void brport_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid)
257 {
258 	struct net_bridge_port *p = kobj_to_brport(kobj);
259 
260 	net_ns_get_ownership(dev_net(p->dev), uid, gid);
261 }
262 
263 static struct kobj_type brport_ktype = {
264 #ifdef CONFIG_SYSFS
265 	.sysfs_ops = &brport_sysfs_ops,
266 #endif
267 	.release = release_nbp,
268 	.get_ownership = brport_get_ownership,
269 };
270 
271 static void destroy_nbp(struct net_bridge_port *p)
272 {
273 	struct net_device *dev = p->dev;
274 
275 	p->br = NULL;
276 	p->dev = NULL;
277 	dev_put(dev);
278 
279 	kobject_put(&p->kobj);
280 }
281 
282 static void destroy_nbp_rcu(struct rcu_head *head)
283 {
284 	struct net_bridge_port *p =
285 			container_of(head, struct net_bridge_port, rcu);
286 	destroy_nbp(p);
287 }
288 
289 static unsigned get_max_headroom(struct net_bridge *br)
290 {
291 	unsigned max_headroom = 0;
292 	struct net_bridge_port *p;
293 
294 	list_for_each_entry(p, &br->port_list, list) {
295 		unsigned dev_headroom = netdev_get_fwd_headroom(p->dev);
296 
297 		if (dev_headroom > max_headroom)
298 			max_headroom = dev_headroom;
299 	}
300 
301 	return max_headroom;
302 }
303 
304 static void update_headroom(struct net_bridge *br, int new_hr)
305 {
306 	struct net_bridge_port *p;
307 
308 	list_for_each_entry(p, &br->port_list, list)
309 		netdev_set_rx_headroom(p->dev, new_hr);
310 
311 	br->dev->needed_headroom = new_hr;
312 }
313 
314 /* Delete port(interface) from bridge is done in two steps.
315  * via RCU. First step, marks device as down. That deletes
316  * all the timers and stops new packets from flowing through.
317  *
318  * Final cleanup doesn't occur until after all CPU's finished
319  * processing packets.
320  *
321  * Protected from multiple admin operations by RTNL mutex
322  */
323 static void del_nbp(struct net_bridge_port *p)
324 {
325 	struct net_bridge *br = p->br;
326 	struct net_device *dev = p->dev;
327 
328 	sysfs_remove_link(br->ifobj, p->dev->name);
329 
330 	nbp_delete_promisc(p);
331 
332 	spin_lock_bh(&br->lock);
333 	br_stp_disable_port(p);
334 	spin_unlock_bh(&br->lock);
335 
336 	br_ifinfo_notify(RTM_DELLINK, NULL, p);
337 
338 	list_del_rcu(&p->list);
339 	if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom)
340 		update_headroom(br, get_max_headroom(br));
341 	netdev_reset_rx_headroom(dev);
342 
343 	nbp_vlan_flush(p);
344 	br_fdb_delete_by_port(br, p, 0, 1);
345 	switchdev_deferred_process();
346 	nbp_backup_clear(p);
347 
348 	nbp_update_port_count(br);
349 
350 	netdev_upper_dev_unlink(dev, br->dev);
351 
352 	dev->priv_flags &= ~IFF_BRIDGE_PORT;
353 
354 	netdev_rx_handler_unregister(dev);
355 
356 	br_multicast_del_port(p);
357 
358 	kobject_uevent(&p->kobj, KOBJ_REMOVE);
359 	kobject_del(&p->kobj);
360 
361 	br_netpoll_disable(p);
362 
363 	call_rcu(&p->rcu, destroy_nbp_rcu);
364 }
365 
366 /* Delete bridge device */
367 void br_dev_delete(struct net_device *dev, struct list_head *head)
368 {
369 	struct net_bridge *br = netdev_priv(dev);
370 	struct net_bridge_port *p, *n;
371 
372 	list_for_each_entry_safe(p, n, &br->port_list, list) {
373 		del_nbp(p);
374 	}
375 
376 	br_recalculate_neigh_suppress_enabled(br);
377 
378 	br_fdb_delete_by_port(br, NULL, 0, 1);
379 
380 	cancel_delayed_work_sync(&br->gc_work);
381 
382 	br_sysfs_delbr(br->dev);
383 	unregister_netdevice_queue(br->dev, head);
384 }
385 
386 /* find an available port number */
387 static int find_portno(struct net_bridge *br)
388 {
389 	int index;
390 	struct net_bridge_port *p;
391 	unsigned long *inuse;
392 
393 	inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL);
394 	if (!inuse)
395 		return -ENOMEM;
396 
397 	set_bit(0, inuse);	/* zero is reserved */
398 	list_for_each_entry(p, &br->port_list, list) {
399 		set_bit(p->port_no, inuse);
400 	}
401 	index = find_first_zero_bit(inuse, BR_MAX_PORTS);
402 	bitmap_free(inuse);
403 
404 	return (index >= BR_MAX_PORTS) ? -EXFULL : index;
405 }
406 
407 /* called with RTNL but without bridge lock */
408 static struct net_bridge_port *new_nbp(struct net_bridge *br,
409 				       struct net_device *dev)
410 {
411 	struct net_bridge_port *p;
412 	int index, err;
413 
414 	index = find_portno(br);
415 	if (index < 0)
416 		return ERR_PTR(index);
417 
418 	p = kzalloc(sizeof(*p), GFP_KERNEL);
419 	if (p == NULL)
420 		return ERR_PTR(-ENOMEM);
421 
422 	p->br = br;
423 	dev_hold(dev);
424 	p->dev = dev;
425 	p->path_cost = port_cost(dev);
426 	p->priority = 0x8000 >> BR_PORT_BITS;
427 	p->port_no = index;
428 	p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
429 	br_init_port(p);
430 	br_set_state(p, BR_STATE_DISABLED);
431 	br_stp_port_timer_init(p);
432 	err = br_multicast_add_port(p);
433 	if (err) {
434 		dev_put(dev);
435 		kfree(p);
436 		p = ERR_PTR(err);
437 	}
438 
439 	return p;
440 }
441 
442 int br_add_bridge(struct net *net, const char *name)
443 {
444 	struct net_device *dev;
445 	int res;
446 
447 	dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN,
448 			   br_dev_setup);
449 
450 	if (!dev)
451 		return -ENOMEM;
452 
453 	dev_net_set(dev, net);
454 	dev->rtnl_link_ops = &br_link_ops;
455 
456 	res = register_netdev(dev);
457 	if (res)
458 		free_netdev(dev);
459 	return res;
460 }
461 
462 int br_del_bridge(struct net *net, const char *name)
463 {
464 	struct net_device *dev;
465 	int ret = 0;
466 
467 	rtnl_lock();
468 	dev = __dev_get_by_name(net, name);
469 	if (dev == NULL)
470 		ret =  -ENXIO; 	/* Could not find device */
471 
472 	else if (!(dev->priv_flags & IFF_EBRIDGE)) {
473 		/* Attempt to delete non bridge device! */
474 		ret = -EPERM;
475 	}
476 
477 	else if (dev->flags & IFF_UP) {
478 		/* Not shutdown yet. */
479 		ret = -EBUSY;
480 	}
481 
482 	else
483 		br_dev_delete(dev, NULL);
484 
485 	rtnl_unlock();
486 	return ret;
487 }
488 
489 /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */
490 static int br_mtu_min(const struct net_bridge *br)
491 {
492 	const struct net_bridge_port *p;
493 	int ret_mtu = 0;
494 
495 	list_for_each_entry(p, &br->port_list, list)
496 		if (!ret_mtu || ret_mtu > p->dev->mtu)
497 			ret_mtu = p->dev->mtu;
498 
499 	return ret_mtu ? ret_mtu : ETH_DATA_LEN;
500 }
501 
502 void br_mtu_auto_adjust(struct net_bridge *br)
503 {
504 	ASSERT_RTNL();
505 
506 	/* if the bridge MTU was manually configured don't mess with it */
507 	if (br_opt_get(br, BROPT_MTU_SET_BY_USER))
508 		return;
509 
510 	/* change to the minimum MTU and clear the flag which was set by
511 	 * the bridge ndo_change_mtu callback
512 	 */
513 	dev_set_mtu(br->dev, br_mtu_min(br));
514 	br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false);
515 }
516 
517 static void br_set_gso_limits(struct net_bridge *br)
518 {
519 	unsigned int gso_max_size = GSO_MAX_SIZE;
520 	u16 gso_max_segs = GSO_MAX_SEGS;
521 	const struct net_bridge_port *p;
522 
523 	list_for_each_entry(p, &br->port_list, list) {
524 		gso_max_size = min(gso_max_size, p->dev->gso_max_size);
525 		gso_max_segs = min(gso_max_segs, p->dev->gso_max_segs);
526 	}
527 	br->dev->gso_max_size = gso_max_size;
528 	br->dev->gso_max_segs = gso_max_segs;
529 }
530 
531 /*
532  * Recomputes features using slave's features
533  */
534 netdev_features_t br_features_recompute(struct net_bridge *br,
535 	netdev_features_t features)
536 {
537 	struct net_bridge_port *p;
538 	netdev_features_t mask;
539 
540 	if (list_empty(&br->port_list))
541 		return features;
542 
543 	mask = features;
544 	features &= ~NETIF_F_ONE_FOR_ALL;
545 
546 	list_for_each_entry(p, &br->port_list, list) {
547 		features = netdev_increment_features(features,
548 						     p->dev->features, mask);
549 	}
550 	features = netdev_add_tso_features(features, mask);
551 
552 	return features;
553 }
554 
555 /* called with RTNL */
556 int br_add_if(struct net_bridge *br, struct net_device *dev,
557 	      struct netlink_ext_ack *extack)
558 {
559 	struct net_bridge_port *p;
560 	int err = 0;
561 	unsigned br_hr, dev_hr;
562 	bool changed_addr;
563 
564 	/* Don't allow bridging non-ethernet like devices, or DSA-enabled
565 	 * master network devices since the bridge layer rx_handler prevents
566 	 * the DSA fake ethertype handler to be invoked, so we do not strip off
567 	 * the DSA switch tag protocol header and the bridge layer just return
568 	 * RX_HANDLER_CONSUMED, stopping RX processing for these frames.
569 	 */
570 	if ((dev->flags & IFF_LOOPBACK) ||
571 	    dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
572 	    !is_valid_ether_addr(dev->dev_addr) ||
573 	    netdev_uses_dsa(dev))
574 		return -EINVAL;
575 
576 	/* No bridging of bridges */
577 	if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) {
578 		NL_SET_ERR_MSG(extack,
579 			       "Can not enslave a bridge to a bridge");
580 		return -ELOOP;
581 	}
582 
583 	/* Device has master upper dev */
584 	if (netdev_master_upper_dev_get(dev))
585 		return -EBUSY;
586 
587 	/* No bridging devices that dislike that (e.g. wireless) */
588 	if (dev->priv_flags & IFF_DONT_BRIDGE) {
589 		NL_SET_ERR_MSG(extack,
590 			       "Device does not allow enslaving to a bridge");
591 		return -EOPNOTSUPP;
592 	}
593 
594 	p = new_nbp(br, dev);
595 	if (IS_ERR(p))
596 		return PTR_ERR(p);
597 
598 	call_netdevice_notifiers(NETDEV_JOIN, dev);
599 
600 	err = dev_set_allmulti(dev, 1);
601 	if (err) {
602 		kfree(p);	/* kobject not yet init'd, manually free */
603 		goto err1;
604 	}
605 
606 	err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
607 				   SYSFS_BRIDGE_PORT_ATTR);
608 	if (err)
609 		goto err2;
610 
611 	err = br_sysfs_addif(p);
612 	if (err)
613 		goto err2;
614 
615 	err = br_netpoll_enable(p);
616 	if (err)
617 		goto err3;
618 
619 	err = netdev_rx_handler_register(dev, br_handle_frame, p);
620 	if (err)
621 		goto err4;
622 
623 	dev->priv_flags |= IFF_BRIDGE_PORT;
624 
625 	err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL, extack);
626 	if (err)
627 		goto err5;
628 
629 	err = nbp_switchdev_mark_set(p);
630 	if (err)
631 		goto err6;
632 
633 	dev_disable_lro(dev);
634 
635 	list_add_rcu(&p->list, &br->port_list);
636 
637 	nbp_update_port_count(br);
638 
639 	netdev_update_features(br->dev);
640 
641 	br_hr = br->dev->needed_headroom;
642 	dev_hr = netdev_get_fwd_headroom(dev);
643 	if (br_hr < dev_hr)
644 		update_headroom(br, dev_hr);
645 	else
646 		netdev_set_rx_headroom(dev, br_hr);
647 
648 	if (br_fdb_insert(br, p, dev->dev_addr, 0))
649 		netdev_err(dev, "failed insert local address bridge forwarding table\n");
650 
651 	if (br->dev->addr_assign_type != NET_ADDR_SET) {
652 		/* Ask for permission to use this MAC address now, even if we
653 		 * don't end up choosing it below.
654 		 */
655 		err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack);
656 		if (err)
657 			goto err7;
658 	}
659 
660 	err = nbp_vlan_init(p, extack);
661 	if (err) {
662 		netdev_err(dev, "failed to initialize vlan filtering on this port\n");
663 		goto err7;
664 	}
665 
666 	spin_lock_bh(&br->lock);
667 	changed_addr = br_stp_recalculate_bridge_id(br);
668 
669 	if (netif_running(dev) && netif_oper_up(dev) &&
670 	    (br->dev->flags & IFF_UP))
671 		br_stp_enable_port(p);
672 	spin_unlock_bh(&br->lock);
673 
674 	br_ifinfo_notify(RTM_NEWLINK, NULL, p);
675 
676 	if (changed_addr)
677 		call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
678 
679 	br_mtu_auto_adjust(br);
680 	br_set_gso_limits(br);
681 
682 	kobject_uevent(&p->kobj, KOBJ_ADD);
683 
684 	return 0;
685 
686 err7:
687 	list_del_rcu(&p->list);
688 	br_fdb_delete_by_port(br, p, 0, 1);
689 	nbp_update_port_count(br);
690 err6:
691 	netdev_upper_dev_unlink(dev, br->dev);
692 err5:
693 	dev->priv_flags &= ~IFF_BRIDGE_PORT;
694 	netdev_rx_handler_unregister(dev);
695 err4:
696 	br_netpoll_disable(p);
697 err3:
698 	sysfs_remove_link(br->ifobj, p->dev->name);
699 err2:
700 	kobject_put(&p->kobj);
701 	dev_set_allmulti(dev, -1);
702 err1:
703 	dev_put(dev);
704 	return err;
705 }
706 
707 /* called with RTNL */
708 int br_del_if(struct net_bridge *br, struct net_device *dev)
709 {
710 	struct net_bridge_port *p;
711 	bool changed_addr;
712 
713 	p = br_port_get_rtnl(dev);
714 	if (!p || p->br != br)
715 		return -EINVAL;
716 
717 	/* Since more than one interface can be attached to a bridge,
718 	 * there still maybe an alternate path for netconsole to use;
719 	 * therefore there is no reason for a NETDEV_RELEASE event.
720 	 */
721 	del_nbp(p);
722 
723 	br_mtu_auto_adjust(br);
724 	br_set_gso_limits(br);
725 
726 	spin_lock_bh(&br->lock);
727 	changed_addr = br_stp_recalculate_bridge_id(br);
728 	spin_unlock_bh(&br->lock);
729 
730 	if (changed_addr)
731 		call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
732 
733 	netdev_update_features(br->dev);
734 
735 	return 0;
736 }
737 
738 void br_port_flags_change(struct net_bridge_port *p, unsigned long mask)
739 {
740 	struct net_bridge *br = p->br;
741 
742 	if (mask & BR_AUTO_MASK)
743 		nbp_update_port_count(br);
744 
745 	if (mask & BR_NEIGH_SUPPRESS)
746 		br_recalculate_neigh_suppress_enabled(br);
747 }
748 
749 bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag)
750 {
751 	struct net_bridge_port *p;
752 
753 	p = br_port_get_rtnl_rcu(dev);
754 	if (!p)
755 		return false;
756 
757 	return p->flags & flag;
758 }
759 EXPORT_SYMBOL_GPL(br_port_flag_is_set);
760