xref: /openbmc/linux/net/bridge/br_if.c (revision 8931ddd8)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	Userspace interface
4  *	Linux ethernet bridge
5  *
6  *	Authors:
7  *	Lennert Buytenhek		<buytenh@gnu.org>
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/netdevice.h>
12 #include <linux/etherdevice.h>
13 #include <linux/netpoll.h>
14 #include <linux/ethtool.h>
15 #include <linux/if_arp.h>
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/rtnetlink.h>
19 #include <linux/if_ether.h>
20 #include <linux/slab.h>
21 #include <net/dsa.h>
22 #include <net/sock.h>
23 #include <linux/if_vlan.h>
24 #include <net/switchdev.h>
25 #include <net/net_namespace.h>
26 
27 #include "br_private.h"
28 
29 /*
30  * Determine initial path cost based on speed.
31  * using recommendations from 802.1d standard
32  *
33  * Since driver might sleep need to not be holding any locks.
34  */
35 static int port_cost(struct net_device *dev)
36 {
37 	struct ethtool_link_ksettings ecmd;
38 
39 	if (!__ethtool_get_link_ksettings(dev, &ecmd)) {
40 		switch (ecmd.base.speed) {
41 		case SPEED_10000:
42 			return 2;
43 		case SPEED_1000:
44 			return 4;
45 		case SPEED_100:
46 			return 19;
47 		case SPEED_10:
48 			return 100;
49 		}
50 	}
51 
52 	/* Old silly heuristics based on name */
53 	if (!strncmp(dev->name, "lec", 3))
54 		return 7;
55 
56 	if (!strncmp(dev->name, "plip", 4))
57 		return 2500;
58 
59 	return 100;	/* assume old 10Mbps */
60 }
61 
62 
63 /* Check for port carrier transitions. */
64 void br_port_carrier_check(struct net_bridge_port *p, bool *notified)
65 {
66 	struct net_device *dev = p->dev;
67 	struct net_bridge *br = p->br;
68 
69 	if (!(p->flags & BR_ADMIN_COST) &&
70 	    netif_running(dev) && netif_oper_up(dev))
71 		p->path_cost = port_cost(dev);
72 
73 	*notified = false;
74 	if (!netif_running(br->dev))
75 		return;
76 
77 	spin_lock_bh(&br->lock);
78 	if (netif_running(dev) && netif_oper_up(dev)) {
79 		if (p->state == BR_STATE_DISABLED) {
80 			br_stp_enable_port(p);
81 			*notified = true;
82 		}
83 	} else {
84 		if (p->state != BR_STATE_DISABLED) {
85 			br_stp_disable_port(p);
86 			*notified = true;
87 		}
88 	}
89 	spin_unlock_bh(&br->lock);
90 }
91 
92 static void br_port_set_promisc(struct net_bridge_port *p)
93 {
94 	int err = 0;
95 
96 	if (br_promisc_port(p))
97 		return;
98 
99 	err = dev_set_promiscuity(p->dev, 1);
100 	if (err)
101 		return;
102 
103 	br_fdb_unsync_static(p->br, p);
104 	p->flags |= BR_PROMISC;
105 }
106 
107 static void br_port_clear_promisc(struct net_bridge_port *p)
108 {
109 	int err;
110 
111 	/* Check if the port is already non-promisc or if it doesn't
112 	 * support UNICAST filtering.  Without unicast filtering support
113 	 * we'll end up re-enabling promisc mode anyway, so just check for
114 	 * it here.
115 	 */
116 	if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
117 		return;
118 
119 	/* Since we'll be clearing the promisc mode, program the port
120 	 * first so that we don't have interruption in traffic.
121 	 */
122 	err = br_fdb_sync_static(p->br, p);
123 	if (err)
124 		return;
125 
126 	dev_set_promiscuity(p->dev, -1);
127 	p->flags &= ~BR_PROMISC;
128 }
129 
130 /* When a port is added or removed or when certain port flags
131  * change, this function is called to automatically manage
132  * promiscuity setting of all the bridge ports.  We are always called
133  * under RTNL so can skip using rcu primitives.
134  */
135 void br_manage_promisc(struct net_bridge *br)
136 {
137 	struct net_bridge_port *p;
138 	bool set_all = false;
139 
140 	/* If vlan filtering is disabled or bridge interface is placed
141 	 * into promiscuous mode, place all ports in promiscuous mode.
142 	 */
143 	if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br->dev))
144 		set_all = true;
145 
146 	list_for_each_entry(p, &br->port_list, list) {
147 		if (set_all) {
148 			br_port_set_promisc(p);
149 		} else {
150 			/* If the number of auto-ports is <= 1, then all other
151 			 * ports will have their output configuration
152 			 * statically specified through fdbs.  Since ingress
153 			 * on the auto-port becomes forwarding/egress to other
154 			 * ports and egress configuration is statically known,
155 			 * we can say that ingress configuration of the
156 			 * auto-port is also statically known.
157 			 * This lets us disable promiscuous mode and write
158 			 * this config to hw.
159 			 */
160 			if (br->auto_cnt == 0 ||
161 			    (br->auto_cnt == 1 && br_auto_port(p)))
162 				br_port_clear_promisc(p);
163 			else
164 				br_port_set_promisc(p);
165 		}
166 	}
167 }
168 
169 int nbp_backup_change(struct net_bridge_port *p,
170 		      struct net_device *backup_dev)
171 {
172 	struct net_bridge_port *old_backup = rtnl_dereference(p->backup_port);
173 	struct net_bridge_port *backup_p = NULL;
174 
175 	ASSERT_RTNL();
176 
177 	if (backup_dev) {
178 		if (!netif_is_bridge_port(backup_dev))
179 			return -ENOENT;
180 
181 		backup_p = br_port_get_rtnl(backup_dev);
182 		if (backup_p->br != p->br)
183 			return -EINVAL;
184 	}
185 
186 	if (p == backup_p)
187 		return -EINVAL;
188 
189 	if (old_backup == backup_p)
190 		return 0;
191 
192 	/* if the backup link is already set, clear it */
193 	if (old_backup)
194 		old_backup->backup_redirected_cnt--;
195 
196 	if (backup_p)
197 		backup_p->backup_redirected_cnt++;
198 	rcu_assign_pointer(p->backup_port, backup_p);
199 
200 	return 0;
201 }
202 
203 static void nbp_backup_clear(struct net_bridge_port *p)
204 {
205 	nbp_backup_change(p, NULL);
206 	if (p->backup_redirected_cnt) {
207 		struct net_bridge_port *cur_p;
208 
209 		list_for_each_entry(cur_p, &p->br->port_list, list) {
210 			struct net_bridge_port *backup_p;
211 
212 			backup_p = rtnl_dereference(cur_p->backup_port);
213 			if (backup_p == p)
214 				nbp_backup_change(cur_p, NULL);
215 		}
216 	}
217 
218 	WARN_ON(rcu_access_pointer(p->backup_port) || p->backup_redirected_cnt);
219 }
220 
221 static void nbp_update_port_count(struct net_bridge *br)
222 {
223 	struct net_bridge_port *p;
224 	u32 cnt = 0;
225 
226 	list_for_each_entry(p, &br->port_list, list) {
227 		if (br_auto_port(p))
228 			cnt++;
229 	}
230 	if (br->auto_cnt != cnt) {
231 		br->auto_cnt = cnt;
232 		br_manage_promisc(br);
233 	}
234 }
235 
236 static void nbp_delete_promisc(struct net_bridge_port *p)
237 {
238 	/* If port is currently promiscuous, unset promiscuity.
239 	 * Otherwise, it is a static port so remove all addresses
240 	 * from it.
241 	 */
242 	dev_set_allmulti(p->dev, -1);
243 	if (br_promisc_port(p))
244 		dev_set_promiscuity(p->dev, -1);
245 	else
246 		br_fdb_unsync_static(p->br, p);
247 }
248 
249 static void release_nbp(struct kobject *kobj)
250 {
251 	struct net_bridge_port *p
252 		= container_of(kobj, struct net_bridge_port, kobj);
253 	kfree(p);
254 }
255 
256 static void brport_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid)
257 {
258 	struct net_bridge_port *p = kobj_to_brport(kobj);
259 
260 	net_ns_get_ownership(dev_net(p->dev), uid, gid);
261 }
262 
263 static struct kobj_type brport_ktype = {
264 #ifdef CONFIG_SYSFS
265 	.sysfs_ops = &brport_sysfs_ops,
266 #endif
267 	.release = release_nbp,
268 	.get_ownership = brport_get_ownership,
269 };
270 
271 static void destroy_nbp(struct net_bridge_port *p)
272 {
273 	struct net_device *dev = p->dev;
274 
275 	p->br = NULL;
276 	p->dev = NULL;
277 	dev_put_track(dev, &p->dev_tracker);
278 
279 	kobject_put(&p->kobj);
280 }
281 
282 static void destroy_nbp_rcu(struct rcu_head *head)
283 {
284 	struct net_bridge_port *p =
285 			container_of(head, struct net_bridge_port, rcu);
286 	destroy_nbp(p);
287 }
288 
289 static unsigned get_max_headroom(struct net_bridge *br)
290 {
291 	unsigned max_headroom = 0;
292 	struct net_bridge_port *p;
293 
294 	list_for_each_entry(p, &br->port_list, list) {
295 		unsigned dev_headroom = netdev_get_fwd_headroom(p->dev);
296 
297 		if (dev_headroom > max_headroom)
298 			max_headroom = dev_headroom;
299 	}
300 
301 	return max_headroom;
302 }
303 
304 static void update_headroom(struct net_bridge *br, int new_hr)
305 {
306 	struct net_bridge_port *p;
307 
308 	list_for_each_entry(p, &br->port_list, list)
309 		netdev_set_rx_headroom(p->dev, new_hr);
310 
311 	br->dev->needed_headroom = new_hr;
312 }
313 
314 /* Delete port(interface) from bridge is done in two steps.
315  * via RCU. First step, marks device as down. That deletes
316  * all the timers and stops new packets from flowing through.
317  *
318  * Final cleanup doesn't occur until after all CPU's finished
319  * processing packets.
320  *
321  * Protected from multiple admin operations by RTNL mutex
322  */
323 static void del_nbp(struct net_bridge_port *p)
324 {
325 	struct net_bridge *br = p->br;
326 	struct net_device *dev = p->dev;
327 
328 	sysfs_remove_link(br->ifobj, p->dev->name);
329 
330 	nbp_delete_promisc(p);
331 
332 	spin_lock_bh(&br->lock);
333 	br_stp_disable_port(p);
334 	spin_unlock_bh(&br->lock);
335 
336 	br_mrp_port_del(br, p);
337 	br_cfm_port_del(br, p);
338 
339 	br_ifinfo_notify(RTM_DELLINK, NULL, p);
340 
341 	list_del_rcu(&p->list);
342 	if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom)
343 		update_headroom(br, get_max_headroom(br));
344 	netdev_reset_rx_headroom(dev);
345 
346 	nbp_vlan_flush(p);
347 	br_fdb_delete_by_port(br, p, 0, 1);
348 	switchdev_deferred_process();
349 	nbp_backup_clear(p);
350 
351 	nbp_update_port_count(br);
352 
353 	netdev_upper_dev_unlink(dev, br->dev);
354 
355 	dev->priv_flags &= ~IFF_BRIDGE_PORT;
356 
357 	netdev_rx_handler_unregister(dev);
358 
359 	br_multicast_del_port(p);
360 
361 	kobject_uevent(&p->kobj, KOBJ_REMOVE);
362 	kobject_del(&p->kobj);
363 
364 	br_netpoll_disable(p);
365 
366 	call_rcu(&p->rcu, destroy_nbp_rcu);
367 }
368 
369 /* Delete bridge device */
370 void br_dev_delete(struct net_device *dev, struct list_head *head)
371 {
372 	struct net_bridge *br = netdev_priv(dev);
373 	struct net_bridge_port *p, *n;
374 
375 	list_for_each_entry_safe(p, n, &br->port_list, list) {
376 		del_nbp(p);
377 	}
378 
379 	br_recalculate_neigh_suppress_enabled(br);
380 
381 	br_fdb_delete_by_port(br, NULL, 0, 1);
382 
383 	cancel_delayed_work_sync(&br->gc_work);
384 
385 	br_sysfs_delbr(br->dev);
386 	unregister_netdevice_queue(br->dev, head);
387 }
388 
389 /* find an available port number */
390 static int find_portno(struct net_bridge *br)
391 {
392 	int index;
393 	struct net_bridge_port *p;
394 	unsigned long *inuse;
395 
396 	inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL);
397 	if (!inuse)
398 		return -ENOMEM;
399 
400 	__set_bit(0, inuse);	/* zero is reserved */
401 	list_for_each_entry(p, &br->port_list, list)
402 		__set_bit(p->port_no, inuse);
403 
404 	index = find_first_zero_bit(inuse, BR_MAX_PORTS);
405 	bitmap_free(inuse);
406 
407 	return (index >= BR_MAX_PORTS) ? -EXFULL : index;
408 }
409 
410 /* called with RTNL but without bridge lock */
411 static struct net_bridge_port *new_nbp(struct net_bridge *br,
412 				       struct net_device *dev)
413 {
414 	struct net_bridge_port *p;
415 	int index, err;
416 
417 	index = find_portno(br);
418 	if (index < 0)
419 		return ERR_PTR(index);
420 
421 	p = kzalloc(sizeof(*p), GFP_KERNEL);
422 	if (p == NULL)
423 		return ERR_PTR(-ENOMEM);
424 
425 	p->br = br;
426 	dev_hold_track(dev, &p->dev_tracker, GFP_KERNEL);
427 	p->dev = dev;
428 	p->path_cost = port_cost(dev);
429 	p->priority = 0x8000 >> BR_PORT_BITS;
430 	p->port_no = index;
431 	p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
432 	br_init_port(p);
433 	br_set_state(p, BR_STATE_DISABLED);
434 	br_stp_port_timer_init(p);
435 	err = br_multicast_add_port(p);
436 	if (err) {
437 		dev_put_track(dev, &p->dev_tracker);
438 		kfree(p);
439 		p = ERR_PTR(err);
440 	}
441 
442 	return p;
443 }
444 
445 int br_add_bridge(struct net *net, const char *name)
446 {
447 	struct net_device *dev;
448 	int res;
449 
450 	dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN,
451 			   br_dev_setup);
452 
453 	if (!dev)
454 		return -ENOMEM;
455 
456 	dev_net_set(dev, net);
457 	dev->rtnl_link_ops = &br_link_ops;
458 
459 	res = register_netdevice(dev);
460 	if (res)
461 		free_netdev(dev);
462 	return res;
463 }
464 
465 int br_del_bridge(struct net *net, const char *name)
466 {
467 	struct net_device *dev;
468 	int ret = 0;
469 
470 	dev = __dev_get_by_name(net, name);
471 	if (dev == NULL)
472 		ret =  -ENXIO; 	/* Could not find device */
473 
474 	else if (!netif_is_bridge_master(dev)) {
475 		/* Attempt to delete non bridge device! */
476 		ret = -EPERM;
477 	}
478 
479 	else if (dev->flags & IFF_UP) {
480 		/* Not shutdown yet. */
481 		ret = -EBUSY;
482 	}
483 
484 	else
485 		br_dev_delete(dev, NULL);
486 
487 	return ret;
488 }
489 
490 /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */
491 static int br_mtu_min(const struct net_bridge *br)
492 {
493 	const struct net_bridge_port *p;
494 	int ret_mtu = 0;
495 
496 	list_for_each_entry(p, &br->port_list, list)
497 		if (!ret_mtu || ret_mtu > p->dev->mtu)
498 			ret_mtu = p->dev->mtu;
499 
500 	return ret_mtu ? ret_mtu : ETH_DATA_LEN;
501 }
502 
503 void br_mtu_auto_adjust(struct net_bridge *br)
504 {
505 	ASSERT_RTNL();
506 
507 	/* if the bridge MTU was manually configured don't mess with it */
508 	if (br_opt_get(br, BROPT_MTU_SET_BY_USER))
509 		return;
510 
511 	/* change to the minimum MTU and clear the flag which was set by
512 	 * the bridge ndo_change_mtu callback
513 	 */
514 	dev_set_mtu(br->dev, br_mtu_min(br));
515 	br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false);
516 }
517 
518 static void br_set_gso_limits(struct net_bridge *br)
519 {
520 	unsigned int gso_max_size = GSO_MAX_SIZE;
521 	u16 gso_max_segs = GSO_MAX_SEGS;
522 	const struct net_bridge_port *p;
523 
524 	list_for_each_entry(p, &br->port_list, list) {
525 		gso_max_size = min(gso_max_size, p->dev->gso_max_size);
526 		gso_max_segs = min(gso_max_segs, p->dev->gso_max_segs);
527 	}
528 	netif_set_gso_max_size(br->dev, gso_max_size);
529 	netif_set_gso_max_segs(br->dev, gso_max_segs);
530 }
531 
532 /*
533  * Recomputes features using slave's features
534  */
535 netdev_features_t br_features_recompute(struct net_bridge *br,
536 	netdev_features_t features)
537 {
538 	struct net_bridge_port *p;
539 	netdev_features_t mask;
540 
541 	if (list_empty(&br->port_list))
542 		return features;
543 
544 	mask = features;
545 	features &= ~NETIF_F_ONE_FOR_ALL;
546 
547 	list_for_each_entry(p, &br->port_list, list) {
548 		features = netdev_increment_features(features,
549 						     p->dev->features, mask);
550 	}
551 	features = netdev_add_tso_features(features, mask);
552 
553 	return features;
554 }
555 
556 /* called with RTNL */
557 int br_add_if(struct net_bridge *br, struct net_device *dev,
558 	      struct netlink_ext_ack *extack)
559 {
560 	struct net_bridge_port *p;
561 	int err = 0;
562 	unsigned br_hr, dev_hr;
563 	bool changed_addr, fdb_synced = false;
564 
565 	/* Don't allow bridging non-ethernet like devices. */
566 	if ((dev->flags & IFF_LOOPBACK) ||
567 	    dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
568 	    !is_valid_ether_addr(dev->dev_addr))
569 		return -EINVAL;
570 
571 	/* Also don't allow bridging of net devices that are DSA masters, since
572 	 * the bridge layer rx_handler prevents the DSA fake ethertype handler
573 	 * to be invoked, so we don't get the chance to strip off and parse the
574 	 * DSA switch tag protocol header (the bridge layer just returns
575 	 * RX_HANDLER_CONSUMED, stopping RX processing for these frames).
576 	 * The only case where that would not be an issue is when bridging can
577 	 * already be offloaded, such as when the DSA master is itself a DSA
578 	 * or plain switchdev port, and is bridged only with other ports from
579 	 * the same hardware device.
580 	 */
581 	if (netdev_uses_dsa(dev)) {
582 		list_for_each_entry(p, &br->port_list, list) {
583 			if (!netdev_port_same_parent_id(dev, p->dev)) {
584 				NL_SET_ERR_MSG(extack,
585 					       "Cannot do software bridging with a DSA master");
586 				return -EINVAL;
587 			}
588 		}
589 	}
590 
591 	/* No bridging of bridges */
592 	if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) {
593 		NL_SET_ERR_MSG(extack,
594 			       "Can not enslave a bridge to a bridge");
595 		return -ELOOP;
596 	}
597 
598 	/* Device has master upper dev */
599 	if (netdev_master_upper_dev_get(dev))
600 		return -EBUSY;
601 
602 	/* No bridging devices that dislike that (e.g. wireless) */
603 	if (dev->priv_flags & IFF_DONT_BRIDGE) {
604 		NL_SET_ERR_MSG(extack,
605 			       "Device does not allow enslaving to a bridge");
606 		return -EOPNOTSUPP;
607 	}
608 
609 	p = new_nbp(br, dev);
610 	if (IS_ERR(p))
611 		return PTR_ERR(p);
612 
613 	call_netdevice_notifiers(NETDEV_JOIN, dev);
614 
615 	err = dev_set_allmulti(dev, 1);
616 	if (err) {
617 		br_multicast_del_port(p);
618 		dev_put_track(dev, &p->dev_tracker);
619 		kfree(p);	/* kobject not yet init'd, manually free */
620 		goto err1;
621 	}
622 
623 	err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
624 				   SYSFS_BRIDGE_PORT_ATTR);
625 	if (err)
626 		goto err2;
627 
628 	err = br_sysfs_addif(p);
629 	if (err)
630 		goto err2;
631 
632 	err = br_netpoll_enable(p);
633 	if (err)
634 		goto err3;
635 
636 	err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p);
637 	if (err)
638 		goto err4;
639 
640 	dev->priv_flags |= IFF_BRIDGE_PORT;
641 
642 	err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL, extack);
643 	if (err)
644 		goto err5;
645 
646 	dev_disable_lro(dev);
647 
648 	list_add_rcu(&p->list, &br->port_list);
649 
650 	nbp_update_port_count(br);
651 	if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) {
652 		/* When updating the port count we also update all ports'
653 		 * promiscuous mode.
654 		 * A port leaving promiscuous mode normally gets the bridge's
655 		 * fdb synced to the unicast filter (if supported), however,
656 		 * `br_port_clear_promisc` does not distinguish between
657 		 * non-promiscuous ports and *new* ports, so we need to
658 		 * sync explicitly here.
659 		 */
660 		fdb_synced = br_fdb_sync_static(br, p) == 0;
661 		if (!fdb_synced)
662 			netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n");
663 	}
664 
665 	netdev_update_features(br->dev);
666 
667 	br_hr = br->dev->needed_headroom;
668 	dev_hr = netdev_get_fwd_headroom(dev);
669 	if (br_hr < dev_hr)
670 		update_headroom(br, dev_hr);
671 	else
672 		netdev_set_rx_headroom(dev, br_hr);
673 
674 	if (br_fdb_add_local(br, p, dev->dev_addr, 0))
675 		netdev_err(dev, "failed insert local address bridge forwarding table\n");
676 
677 	if (br->dev->addr_assign_type != NET_ADDR_SET) {
678 		/* Ask for permission to use this MAC address now, even if we
679 		 * don't end up choosing it below.
680 		 */
681 		err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack);
682 		if (err)
683 			goto err6;
684 	}
685 
686 	err = nbp_vlan_init(p, extack);
687 	if (err) {
688 		netdev_err(dev, "failed to initialize vlan filtering on this port\n");
689 		goto err6;
690 	}
691 
692 	spin_lock_bh(&br->lock);
693 	changed_addr = br_stp_recalculate_bridge_id(br);
694 
695 	if (netif_running(dev) && netif_oper_up(dev) &&
696 	    (br->dev->flags & IFF_UP))
697 		br_stp_enable_port(p);
698 	spin_unlock_bh(&br->lock);
699 
700 	br_ifinfo_notify(RTM_NEWLINK, NULL, p);
701 
702 	if (changed_addr)
703 		call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
704 
705 	br_mtu_auto_adjust(br);
706 	br_set_gso_limits(br);
707 
708 	kobject_uevent(&p->kobj, KOBJ_ADD);
709 
710 	return 0;
711 
712 err6:
713 	if (fdb_synced)
714 		br_fdb_unsync_static(br, p);
715 	list_del_rcu(&p->list);
716 	br_fdb_delete_by_port(br, p, 0, 1);
717 	nbp_update_port_count(br);
718 	netdev_upper_dev_unlink(dev, br->dev);
719 err5:
720 	dev->priv_flags &= ~IFF_BRIDGE_PORT;
721 	netdev_rx_handler_unregister(dev);
722 err4:
723 	br_netpoll_disable(p);
724 err3:
725 	sysfs_remove_link(br->ifobj, p->dev->name);
726 err2:
727 	br_multicast_del_port(p);
728 	dev_put_track(dev, &p->dev_tracker);
729 	kobject_put(&p->kobj);
730 	dev_set_allmulti(dev, -1);
731 err1:
732 	return err;
733 }
734 
735 /* called with RTNL */
736 int br_del_if(struct net_bridge *br, struct net_device *dev)
737 {
738 	struct net_bridge_port *p;
739 	bool changed_addr;
740 
741 	p = br_port_get_rtnl(dev);
742 	if (!p || p->br != br)
743 		return -EINVAL;
744 
745 	/* Since more than one interface can be attached to a bridge,
746 	 * there still maybe an alternate path for netconsole to use;
747 	 * therefore there is no reason for a NETDEV_RELEASE event.
748 	 */
749 	del_nbp(p);
750 
751 	br_mtu_auto_adjust(br);
752 	br_set_gso_limits(br);
753 
754 	spin_lock_bh(&br->lock);
755 	changed_addr = br_stp_recalculate_bridge_id(br);
756 	spin_unlock_bh(&br->lock);
757 
758 	if (changed_addr)
759 		call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
760 
761 	netdev_update_features(br->dev);
762 
763 	return 0;
764 }
765 
766 void br_port_flags_change(struct net_bridge_port *p, unsigned long mask)
767 {
768 	struct net_bridge *br = p->br;
769 
770 	if (mask & BR_AUTO_MASK)
771 		nbp_update_port_count(br);
772 
773 	if (mask & BR_NEIGH_SUPPRESS)
774 		br_recalculate_neigh_suppress_enabled(br);
775 }
776 
777 bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag)
778 {
779 	struct net_bridge_port *p;
780 
781 	p = br_port_get_rtnl_rcu(dev);
782 	if (!p)
783 		return false;
784 
785 	return p->flags & flag;
786 }
787 EXPORT_SYMBOL_GPL(br_port_flag_is_set);
788