xref: /openbmc/linux/net/ax25/ax25_ip.c (revision 25985edc)
1 /*
2  * This program is free software; you can redistribute it and/or modify
3  * it under the terms of the GNU General Public License as published by
4  * the Free Software Foundation; either version 2 of the License, or
5  * (at your option) any later version.
6  *
7  * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
8  */
9 #include <linux/errno.h>
10 #include <linux/types.h>
11 #include <linux/socket.h>
12 #include <linux/in.h>
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/timer.h>
16 #include <linux/string.h>
17 #include <linux/sockios.h>
18 #include <linux/net.h>
19 #include <linux/slab.h>
20 #include <net/ax25.h>
21 #include <linux/inet.h>
22 #include <linux/netdevice.h>
23 #include <linux/if_arp.h>
24 #include <linux/skbuff.h>
25 #include <net/sock.h>
26 #include <asm/uaccess.h>
27 #include <asm/system.h>
28 #include <linux/fcntl.h>
29 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
30 #include <linux/mm.h>
31 #include <linux/interrupt.h>
32 #include <linux/notifier.h>
33 #include <linux/proc_fs.h>
34 #include <linux/stat.h>
35 #include <linux/netfilter.h>
36 #include <linux/sysctl.h>
37 #include <net/ip.h>
38 #include <net/arp.h>
39 
40 /*
41  *	IP over AX.25 encapsulation.
42  */
43 
44 /*
45  *	Shove an AX.25 UI header on an IP packet and handle ARP
46  */
47 
48 #ifdef CONFIG_INET
49 
50 int ax25_hard_header(struct sk_buff *skb, struct net_device *dev,
51 		     unsigned short type, const void *daddr,
52 		     const void *saddr, unsigned len)
53 {
54 	unsigned char *buff;
55 
56 	/* they sometimes come back to us... */
57 	if (type == ETH_P_AX25)
58 		return 0;
59 
60 	/* header is an AX.25 UI frame from us to them */
61 	buff = skb_push(skb, AX25_HEADER_LEN);
62 	*buff++ = 0x00;	/* KISS DATA */
63 
64 	if (daddr != NULL)
65 		memcpy(buff, daddr, dev->addr_len);	/* Address specified */
66 
67 	buff[6] &= ~AX25_CBIT;
68 	buff[6] &= ~AX25_EBIT;
69 	buff[6] |= AX25_SSSID_SPARE;
70 	buff    += AX25_ADDR_LEN;
71 
72 	if (saddr != NULL)
73 		memcpy(buff, saddr, dev->addr_len);
74 	else
75 		memcpy(buff, dev->dev_addr, dev->addr_len);
76 
77 	buff[6] &= ~AX25_CBIT;
78 	buff[6] |= AX25_EBIT;
79 	buff[6] |= AX25_SSSID_SPARE;
80 	buff    += AX25_ADDR_LEN;
81 
82 	*buff++  = AX25_UI;	/* UI */
83 
84 	/* Append a suitable AX.25 PID */
85 	switch (type) {
86 	case ETH_P_IP:
87 		*buff++ = AX25_P_IP;
88 		break;
89 	case ETH_P_ARP:
90 		*buff++ = AX25_P_ARP;
91 		break;
92 	default:
93 		printk(KERN_ERR "AX.25: ax25_hard_header - wrong protocol type 0x%2.2x\n", type);
94 		*buff++ = 0;
95 		break;
96 	}
97 
98 	if (daddr != NULL)
99 		return AX25_HEADER_LEN;
100 
101 	return -AX25_HEADER_LEN;	/* Unfinished header */
102 }
103 
104 int ax25_rebuild_header(struct sk_buff *skb)
105 {
106 	struct sk_buff *ourskb;
107 	unsigned char *bp  = skb->data;
108 	ax25_route *route;
109 	struct net_device *dev = NULL;
110 	ax25_address *src, *dst;
111 	ax25_digi *digipeat = NULL;
112 	ax25_dev *ax25_dev;
113 	ax25_cb *ax25;
114 	char ip_mode = ' ';
115 
116 	dst = (ax25_address *)(bp + 1);
117 	src = (ax25_address *)(bp + 8);
118 
119 	if (arp_find(bp + 1, skb))
120 		return 1;
121 
122 	route = ax25_get_route(dst, NULL);
123 	if (route) {
124 		digipeat = route->digipeat;
125 		dev = route->dev;
126 		ip_mode = route->ip_mode;
127 	}
128 
129 	if (dev == NULL)
130 		dev = skb->dev;
131 
132 	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) {
133 		goto put;
134 	}
135 
136 	if (bp[16] == AX25_P_IP) {
137 		if (ip_mode == 'V' || (ip_mode == ' ' && ax25_dev->values[AX25_VALUES_IPDEFMODE])) {
138 			/*
139 			 *	We copy the buffer and release the original thereby
140 			 *	keeping it straight
141 			 *
142 			 *	Note: we report 1 back so the caller will
143 			 *	not feed the frame direct to the physical device
144 			 *	We don't want that to happen. (It won't be upset
145 			 *	as we have pulled the frame from the queue by
146 			 *	freeing it).
147 			 *
148 			 *	NB: TCP modifies buffers that are still
149 			 *	on a device queue, thus we use skb_copy()
150 			 *      instead of using skb_clone() unless this
151 			 *	gets fixed.
152 			 */
153 
154 			ax25_address src_c;
155 			ax25_address dst_c;
156 
157 			if ((ourskb = skb_copy(skb, GFP_ATOMIC)) == NULL) {
158 				kfree_skb(skb);
159 				goto put;
160 			}
161 
162 			if (skb->sk != NULL)
163 				skb_set_owner_w(ourskb, skb->sk);
164 
165 			kfree_skb(skb);
166 			/* dl9sau: bugfix
167 			 * after kfree_skb(), dst and src which were pointer
168 			 * to bp which is part of skb->data would not be valid
169 			 * anymore hope that after skb_pull(ourskb, ..) our
170 			 * dsc_c and src_c will not become invalid
171 			 */
172 			bp  = ourskb->data;
173 			dst_c = *(ax25_address *)(bp + 1);
174 			src_c = *(ax25_address *)(bp + 8);
175 
176 			skb_pull(ourskb, AX25_HEADER_LEN - 1);	/* Keep PID */
177 			skb_reset_network_header(ourskb);
178 
179 			ax25=ax25_send_frame(
180 			    ourskb,
181 			    ax25_dev->values[AX25_VALUES_PACLEN],
182 			    &src_c,
183 			    &dst_c, digipeat, dev);
184 			if (ax25) {
185 				ax25_cb_put(ax25);
186 			}
187 			goto put;
188 		}
189 	}
190 
191 	bp[7]  &= ~AX25_CBIT;
192 	bp[7]  &= ~AX25_EBIT;
193 	bp[7]  |= AX25_SSSID_SPARE;
194 
195 	bp[14] &= ~AX25_CBIT;
196 	bp[14] |= AX25_EBIT;
197 	bp[14] |= AX25_SSSID_SPARE;
198 
199 	skb_pull(skb, AX25_KISS_HEADER_LEN);
200 
201 	if (digipeat != NULL) {
202 		if ((ourskb = ax25_rt_build_path(skb, src, dst, route->digipeat)) == NULL) {
203 			kfree_skb(skb);
204 			goto put;
205 		}
206 
207 		skb = ourskb;
208 	}
209 
210 	ax25_queue_xmit(skb, dev);
211 
212 put:
213 	if (route)
214 		ax25_put_route(route);
215 
216 	return 1;
217 }
218 
219 #else	/* INET */
220 
221 int ax25_hard_header(struct sk_buff *skb, struct net_device *dev,
222 		     unsigned short type, const void *daddr,
223 		     const void *saddr, unsigned len)
224 {
225 	return -AX25_HEADER_LEN;
226 }
227 
228 int ax25_rebuild_header(struct sk_buff *skb)
229 {
230 	return 1;
231 }
232 
233 #endif
234 
235 const struct header_ops ax25_header_ops = {
236 	.create = ax25_hard_header,
237 	.rebuild = ax25_rebuild_header,
238 };
239 
240 EXPORT_SYMBOL(ax25_hard_header);
241 EXPORT_SYMBOL(ax25_rebuild_header);
242 EXPORT_SYMBOL(ax25_header_ops);
243 
244