1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Network configuration 4# 5 6menuconfig NET 7 bool "Networking support" 8 select NLATTR 9 select GENERIC_NET_UTILS 10 select BPF 11 ---help--- 12 Unless you really know what you are doing, you should say Y here. 13 The reason is that some programs need kernel networking support even 14 when running on a stand-alone machine that isn't connected to any 15 other computer. 16 17 If you are upgrading from an older kernel, you 18 should consider updating your networking tools too because changes 19 in the kernel and the tools often go hand in hand. The tools are 20 contained in the package net-tools, the location and version number 21 of which are given in <file:Documentation/Changes>. 22 23 For a general introduction to Linux networking, it is highly 24 recommended to read the NET-HOWTO, available from 25 <http://www.tldp.org/docs.html#howto>. 26 27if NET 28 29config WANT_COMPAT_NETLINK_MESSAGES 30 bool 31 help 32 This option can be selected by other options that need compat 33 netlink messages. 34 35config COMPAT_NETLINK_MESSAGES 36 def_bool y 37 depends on COMPAT 38 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 39 help 40 This option makes it possible to send different netlink messages 41 to tasks depending on whether the task is a compat task or not. To 42 achieve this, you need to set skb_shinfo(skb)->frag_list to the 43 compat skb before sending the skb, the netlink code will sort out 44 which message to actually pass to the task. 45 46 Newly written code should NEVER need this option but do 47 compat-independent messages instead! 48 49config NET_INGRESS 50 bool 51 52config NET_EGRESS 53 bool 54 55config SKB_EXTENSIONS 56 bool 57 58menu "Networking options" 59 60source "net/packet/Kconfig" 61source "net/unix/Kconfig" 62source "net/tls/Kconfig" 63source "net/xfrm/Kconfig" 64source "net/iucv/Kconfig" 65source "net/smc/Kconfig" 66source "net/xdp/Kconfig" 67 68config INET 69 bool "TCP/IP networking" 70 ---help--- 71 These are the protocols used on the Internet and on most local 72 Ethernets. It is highly recommended to say Y here (this will enlarge 73 your kernel by about 400 KB), since some programs (e.g. the X window 74 system) use TCP/IP even if your machine is not connected to any 75 other computer. You will get the so-called loopback device which 76 allows you to ping yourself (great fun, that!). 77 78 For an excellent introduction to Linux networking, please read the 79 Linux Networking HOWTO, available from 80 <http://www.tldp.org/docs.html#howto>. 81 82 If you say Y here and also to "/proc file system support" and 83 "Sysctl support" below, you can change various aspects of the 84 behavior of the TCP/IP code by writing to the (virtual) files in 85 /proc/sys/net/ipv4/*; the options are explained in the file 86 <file:Documentation/networking/ip-sysctl.txt>. 87 88 Short answer: say Y. 89 90if INET 91source "net/ipv4/Kconfig" 92source "net/ipv6/Kconfig" 93source "net/netlabel/Kconfig" 94source "net/mptcp/Kconfig" 95 96endif # if INET 97 98config NETWORK_SECMARK 99 bool "Security Marking" 100 help 101 This enables security marking of network packets, similar 102 to nfmark, but designated for security purposes. 103 If you are unsure how to answer this question, answer N. 104 105config NET_PTP_CLASSIFY 106 def_bool n 107 108config NETWORK_PHY_TIMESTAMPING 109 bool "Timestamping in PHY devices" 110 select NET_PTP_CLASSIFY 111 help 112 This allows timestamping of network packets by PHYs (or 113 other MII bus snooping devices) with hardware timestamping 114 capabilities. This option adds some overhead in the transmit 115 and receive paths. 116 117 If you are unsure how to answer this question, answer N. 118 119menuconfig NETFILTER 120 bool "Network packet filtering framework (Netfilter)" 121 ---help--- 122 Netfilter is a framework for filtering and mangling network packets 123 that pass through your Linux box. 124 125 The most common use of packet filtering is to run your Linux box as 126 a firewall protecting a local network from the Internet. The type of 127 firewall provided by this kernel support is called a "packet 128 filter", which means that it can reject individual network packets 129 based on type, source, destination etc. The other kind of firewall, 130 a "proxy-based" one, is more secure but more intrusive and more 131 bothersome to set up; it inspects the network traffic much more 132 closely, modifies it and has knowledge about the higher level 133 protocols, which a packet filter lacks. Moreover, proxy-based 134 firewalls often require changes to the programs running on the local 135 clients. Proxy-based firewalls don't need support by the kernel, but 136 they are often combined with a packet filter, which only works if 137 you say Y here. 138 139 You should also say Y here if you intend to use your Linux box as 140 the gateway to the Internet for a local network of machines without 141 globally valid IP addresses. This is called "masquerading": if one 142 of the computers on your local network wants to send something to 143 the outside, your box can "masquerade" as that computer, i.e. it 144 forwards the traffic to the intended outside destination, but 145 modifies the packets to make it look like they came from the 146 firewall box itself. It works both ways: if the outside host 147 replies, the Linux box will silently forward the traffic to the 148 correct local computer. This way, the computers on your local net 149 are completely invisible to the outside world, even though they can 150 reach the outside and can receive replies. It is even possible to 151 run globally visible servers from within a masqueraded local network 152 using a mechanism called portforwarding. Masquerading is also often 153 called NAT (Network Address Translation). 154 155 Another use of Netfilter is in transparent proxying: if a machine on 156 the local network tries to connect to an outside host, your Linux 157 box can transparently forward the traffic to a local server, 158 typically a caching proxy server. 159 160 Yet another use of Netfilter is building a bridging firewall. Using 161 a bridge with Network packet filtering enabled makes iptables "see" 162 the bridged traffic. For filtering on the lower network and Ethernet 163 protocols over the bridge, use ebtables (under bridge netfilter 164 configuration). 165 166 Various modules exist for netfilter which replace the previous 167 masquerading (ipmasqadm), packet filtering (ipchains), transparent 168 proxying, and portforwarding mechanisms. Please see 169 <file:Documentation/Changes> under "iptables" for the location of 170 these packages. 171 172if NETFILTER 173 174config NETFILTER_ADVANCED 175 bool "Advanced netfilter configuration" 176 depends on NETFILTER 177 default y 178 help 179 If you say Y here you can select between all the netfilter modules. 180 If you say N the more unusual ones will not be shown and the 181 basic ones needed by most people will default to 'M'. 182 183 If unsure, say Y. 184 185config BRIDGE_NETFILTER 186 tristate "Bridged IP/ARP packets filtering" 187 depends on BRIDGE 188 depends on NETFILTER && INET 189 depends on NETFILTER_ADVANCED 190 select NETFILTER_FAMILY_BRIDGE 191 select SKB_EXTENSIONS 192 default m 193 ---help--- 194 Enabling this option will let arptables resp. iptables see bridged 195 ARP resp. IP traffic. If you want a bridging firewall, you probably 196 want this option enabled. 197 Enabling or disabling this option doesn't enable or disable 198 ebtables. 199 200 If unsure, say N. 201 202source "net/netfilter/Kconfig" 203source "net/ipv4/netfilter/Kconfig" 204source "net/ipv6/netfilter/Kconfig" 205source "net/decnet/netfilter/Kconfig" 206source "net/bridge/netfilter/Kconfig" 207 208endif 209 210source "net/bpfilter/Kconfig" 211 212source "net/dccp/Kconfig" 213source "net/sctp/Kconfig" 214source "net/rds/Kconfig" 215source "net/tipc/Kconfig" 216source "net/atm/Kconfig" 217source "net/l2tp/Kconfig" 218source "net/802/Kconfig" 219source "net/bridge/Kconfig" 220source "net/dsa/Kconfig" 221source "net/8021q/Kconfig" 222source "net/decnet/Kconfig" 223source "net/llc/Kconfig" 224source "drivers/net/appletalk/Kconfig" 225source "net/x25/Kconfig" 226source "net/lapb/Kconfig" 227source "net/phonet/Kconfig" 228source "net/6lowpan/Kconfig" 229source "net/ieee802154/Kconfig" 230source "net/mac802154/Kconfig" 231source "net/sched/Kconfig" 232source "net/dcb/Kconfig" 233source "net/dns_resolver/Kconfig" 234source "net/batman-adv/Kconfig" 235source "net/openvswitch/Kconfig" 236source "net/vmw_vsock/Kconfig" 237source "net/netlink/Kconfig" 238source "net/mpls/Kconfig" 239source "net/nsh/Kconfig" 240source "net/hsr/Kconfig" 241source "net/switchdev/Kconfig" 242source "net/l3mdev/Kconfig" 243source "net/qrtr/Kconfig" 244source "net/ncsi/Kconfig" 245 246config RPS 247 bool 248 depends on SMP && SYSFS 249 default y 250 251config RFS_ACCEL 252 bool 253 depends on RPS 254 select CPU_RMAP 255 default y 256 257config XPS 258 bool 259 depends on SMP 260 default y 261 262config HWBM 263 bool 264 265config CGROUP_NET_PRIO 266 bool "Network priority cgroup" 267 depends on CGROUPS 268 select SOCK_CGROUP_DATA 269 ---help--- 270 Cgroup subsystem for use in assigning processes to network priorities on 271 a per-interface basis. 272 273config CGROUP_NET_CLASSID 274 bool "Network classid cgroup" 275 depends on CGROUPS 276 select SOCK_CGROUP_DATA 277 ---help--- 278 Cgroup subsystem for use as general purpose socket classid marker that is 279 being used in cls_cgroup and for netfilter matching. 280 281config NET_RX_BUSY_POLL 282 bool 283 default y 284 285config BQL 286 bool 287 depends on SYSFS 288 select DQL 289 default y 290 291config BPF_JIT 292 bool "enable BPF Just In Time compiler" 293 depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT 294 depends on MODULES 295 ---help--- 296 Berkeley Packet Filter filtering capabilities are normally handled 297 by an interpreter. This option allows kernel to generate a native 298 code when filter is loaded in memory. This should speedup 299 packet sniffing (libpcap/tcpdump). 300 301 Note, admin should enable this feature changing: 302 /proc/sys/net/core/bpf_jit_enable 303 /proc/sys/net/core/bpf_jit_harden (optional) 304 /proc/sys/net/core/bpf_jit_kallsyms (optional) 305 306config BPF_STREAM_PARSER 307 bool "enable BPF STREAM_PARSER" 308 depends on INET 309 depends on BPF_SYSCALL 310 depends on CGROUP_BPF 311 select STREAM_PARSER 312 select NET_SOCK_MSG 313 ---help--- 314 Enabling this allows a stream parser to be used with 315 BPF_MAP_TYPE_SOCKMAP. 316 317 BPF_MAP_TYPE_SOCKMAP provides a map type to use with network sockets. 318 It can be used to enforce socket policy, implement socket redirects, 319 etc. 320 321config NET_FLOW_LIMIT 322 bool 323 depends on RPS 324 default y 325 ---help--- 326 The network stack has to drop packets when a receive processing CPU's 327 backlog reaches netdev_max_backlog. If a few out of many active flows 328 generate the vast majority of load, drop their traffic earlier to 329 maintain capacity for the other flows. This feature provides servers 330 with many clients some protection against DoS by a single (spoofed) 331 flow that greatly exceeds average workload. 332 333menu "Network testing" 334 335config NET_PKTGEN 336 tristate "Packet Generator (USE WITH CAUTION)" 337 depends on INET && PROC_FS 338 ---help--- 339 This module will inject preconfigured packets, at a configurable 340 rate, out of a given interface. It is used for network interface 341 stress testing and performance analysis. If you don't understand 342 what was just said, you don't need it: say N. 343 344 Documentation on how to use the packet generator can be found 345 at <file:Documentation/networking/pktgen.txt>. 346 347 To compile this code as a module, choose M here: the 348 module will be called pktgen. 349 350config NET_DROP_MONITOR 351 tristate "Network packet drop alerting service" 352 depends on INET && TRACEPOINTS 353 ---help--- 354 This feature provides an alerting service to userspace in the 355 event that packets are discarded in the network stack. Alerts 356 are broadcast via netlink socket to any listening user space 357 process. If you don't need network drop alerts, or if you are ok 358 just checking the various proc files and other utilities for 359 drop statistics, say N here. 360 361endmenu 362 363endmenu 364 365source "net/ax25/Kconfig" 366source "net/can/Kconfig" 367source "net/bluetooth/Kconfig" 368source "net/rxrpc/Kconfig" 369source "net/kcm/Kconfig" 370source "net/strparser/Kconfig" 371 372config FIB_RULES 373 bool 374 375menuconfig WIRELESS 376 bool "Wireless" 377 depends on !S390 378 default y 379 380if WIRELESS 381 382source "net/wireless/Kconfig" 383source "net/mac80211/Kconfig" 384 385endif # WIRELESS 386 387source "net/wimax/Kconfig" 388 389source "net/rfkill/Kconfig" 390source "net/9p/Kconfig" 391source "net/caif/Kconfig" 392source "net/ceph/Kconfig" 393source "net/nfc/Kconfig" 394source "net/psample/Kconfig" 395source "net/ife/Kconfig" 396 397config LWTUNNEL 398 bool "Network light weight tunnels" 399 ---help--- 400 This feature provides an infrastructure to support light weight 401 tunnels like mpls. There is no netdevice associated with a light 402 weight tunnel endpoint. Tunnel encapsulation parameters are stored 403 with light weight tunnel state associated with fib routes. 404 405config LWTUNNEL_BPF 406 bool "Execute BPF program as route nexthop action" 407 depends on LWTUNNEL && INET 408 default y if LWTUNNEL=y 409 ---help--- 410 Allows to run BPF programs as a nexthop action following a route 411 lookup for incoming and outgoing packets. 412 413config DST_CACHE 414 bool 415 default n 416 417config GRO_CELLS 418 bool 419 default n 420 421config SOCK_VALIDATE_XMIT 422 bool 423 424config NET_SOCK_MSG 425 bool 426 default n 427 help 428 The NET_SOCK_MSG provides a framework for plain sockets (e.g. TCP) or 429 ULPs (upper layer modules, e.g. TLS) to process L7 application data 430 with the help of BPF programs. 431 432config NET_DEVLINK 433 bool 434 default n 435 imply NET_DROP_MONITOR 436 437config PAGE_POOL 438 bool 439 440config FAILOVER 441 tristate "Generic failover module" 442 help 443 The failover module provides a generic interface for paravirtual 444 drivers to register a netdev and a set of ops with a failover 445 instance. The ops are used as event handlers that get called to 446 handle netdev register/unregister/link change/name change events 447 on slave pci ethernet devices with the same mac address as the 448 failover netdev. This enables paravirtual drivers to use a 449 VF as an accelerated low latency datapath. It also allows live 450 migration of VMs with direct attached VFs by failing over to the 451 paravirtual datapath when the VF is unplugged. 452 453config ETHTOOL_NETLINK 454 bool "Netlink interface for ethtool" 455 default y 456 help 457 An alternative userspace interface for ethtool based on generic 458 netlink. It provides better extensibility and some new features, 459 e.g. notification messages. 460 461endif # if NET 462 463# Used by archs to tell that they support BPF JIT compiler plus which flavour. 464# Only one of the two can be selected for a specific arch since eBPF JIT supersedes 465# the cBPF JIT. 466 467# Classic BPF JIT (cBPF) 468config HAVE_CBPF_JIT 469 bool 470 471# Extended BPF JIT (eBPF) 472config HAVE_EBPF_JIT 473 bool 474