1# 2# Network configuration 3# 4 5menuconfig NET 6 bool "Networking support" 7 select NLATTR 8 select GENERIC_NET_UTILS 9 ---help--- 10 Unless you really know what you are doing, you should say Y here. 11 The reason is that some programs need kernel networking support even 12 when running on a stand-alone machine that isn't connected to any 13 other computer. 14 15 If you are upgrading from an older kernel, you 16 should consider updating your networking tools too because changes 17 in the kernel and the tools often go hand in hand. The tools are 18 contained in the package net-tools, the location and version number 19 of which are given in <file:Documentation/Changes>. 20 21 For a general introduction to Linux networking, it is highly 22 recommended to read the NET-HOWTO, available from 23 <http://www.tldp.org/docs.html#howto>. 24 25if NET 26 27config WANT_COMPAT_NETLINK_MESSAGES 28 bool 29 help 30 This option can be selected by other options that need compat 31 netlink messages. 32 33config COMPAT_NETLINK_MESSAGES 34 def_bool y 35 depends on COMPAT 36 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 37 help 38 This option makes it possible to send different netlink messages 39 to tasks depending on whether the task is a compat task or not. To 40 achieve this, you need to set skb_shinfo(skb)->frag_list to the 41 compat skb before sending the skb, the netlink code will sort out 42 which message to actually pass to the task. 43 44 Newly written code should NEVER need this option but do 45 compat-independent messages instead! 46 47menu "Networking options" 48 49source "net/packet/Kconfig" 50source "net/unix/Kconfig" 51source "net/xfrm/Kconfig" 52source "net/iucv/Kconfig" 53 54config INET 55 bool "TCP/IP networking" 56 select CRYPTO 57 select CRYPTO_AES 58 ---help--- 59 These are the protocols used on the Internet and on most local 60 Ethernets. It is highly recommended to say Y here (this will enlarge 61 your kernel by about 400 KB), since some programs (e.g. the X window 62 system) use TCP/IP even if your machine is not connected to any 63 other computer. You will get the so-called loopback device which 64 allows you to ping yourself (great fun, that!). 65 66 For an excellent introduction to Linux networking, please read the 67 Linux Networking HOWTO, available from 68 <http://www.tldp.org/docs.html#howto>. 69 70 If you say Y here and also to "/proc file system support" and 71 "Sysctl support" below, you can change various aspects of the 72 behavior of the TCP/IP code by writing to the (virtual) files in 73 /proc/sys/net/ipv4/*; the options are explained in the file 74 <file:Documentation/networking/ip-sysctl.txt>. 75 76 Short answer: say Y. 77 78if INET 79source "net/ipv4/Kconfig" 80source "net/ipv6/Kconfig" 81source "net/netlabel/Kconfig" 82 83endif # if INET 84 85config NETWORK_SECMARK 86 bool "Security Marking" 87 help 88 This enables security marking of network packets, similar 89 to nfmark, but designated for security purposes. 90 If you are unsure how to answer this question, answer N. 91 92config NETWORK_PHY_TIMESTAMPING 93 bool "Timestamping in PHY devices" 94 help 95 This allows timestamping of network packets by PHYs with 96 hardware timestamping capabilities. This option adds some 97 overhead in the transmit and receive paths. 98 99 If you are unsure how to answer this question, answer N. 100 101menuconfig NETFILTER 102 bool "Network packet filtering framework (Netfilter)" 103 ---help--- 104 Netfilter is a framework for filtering and mangling network packets 105 that pass through your Linux box. 106 107 The most common use of packet filtering is to run your Linux box as 108 a firewall protecting a local network from the Internet. The type of 109 firewall provided by this kernel support is called a "packet 110 filter", which means that it can reject individual network packets 111 based on type, source, destination etc. The other kind of firewall, 112 a "proxy-based" one, is more secure but more intrusive and more 113 bothersome to set up; it inspects the network traffic much more 114 closely, modifies it and has knowledge about the higher level 115 protocols, which a packet filter lacks. Moreover, proxy-based 116 firewalls often require changes to the programs running on the local 117 clients. Proxy-based firewalls don't need support by the kernel, but 118 they are often combined with a packet filter, which only works if 119 you say Y here. 120 121 You should also say Y here if you intend to use your Linux box as 122 the gateway to the Internet for a local network of machines without 123 globally valid IP addresses. This is called "masquerading": if one 124 of the computers on your local network wants to send something to 125 the outside, your box can "masquerade" as that computer, i.e. it 126 forwards the traffic to the intended outside destination, but 127 modifies the packets to make it look like they came from the 128 firewall box itself. It works both ways: if the outside host 129 replies, the Linux box will silently forward the traffic to the 130 correct local computer. This way, the computers on your local net 131 are completely invisible to the outside world, even though they can 132 reach the outside and can receive replies. It is even possible to 133 run globally visible servers from within a masqueraded local network 134 using a mechanism called portforwarding. Masquerading is also often 135 called NAT (Network Address Translation). 136 137 Another use of Netfilter is in transparent proxying: if a machine on 138 the local network tries to connect to an outside host, your Linux 139 box can transparently forward the traffic to a local server, 140 typically a caching proxy server. 141 142 Yet another use of Netfilter is building a bridging firewall. Using 143 a bridge with Network packet filtering enabled makes iptables "see" 144 the bridged traffic. For filtering on the lower network and Ethernet 145 protocols over the bridge, use ebtables (under bridge netfilter 146 configuration). 147 148 Various modules exist for netfilter which replace the previous 149 masquerading (ipmasqadm), packet filtering (ipchains), transparent 150 proxying, and portforwarding mechanisms. Please see 151 <file:Documentation/Changes> under "iptables" for the location of 152 these packages. 153 154if NETFILTER 155 156config NETFILTER_DEBUG 157 bool "Network packet filtering debugging" 158 depends on NETFILTER 159 help 160 You can say Y here if you want to get additional messages useful in 161 debugging the netfilter code. 162 163config NETFILTER_ADVANCED 164 bool "Advanced netfilter configuration" 165 depends on NETFILTER 166 default y 167 help 168 If you say Y here you can select between all the netfilter modules. 169 If you say N the more unusual ones will not be shown and the 170 basic ones needed by most people will default to 'M'. 171 172 If unsure, say Y. 173 174config BRIDGE_NETFILTER 175 bool "Bridged IP/ARP packets filtering" 176 depends on BRIDGE && NETFILTER && INET 177 depends on NETFILTER_ADVANCED 178 default y 179 ---help--- 180 Enabling this option will let arptables resp. iptables see bridged 181 ARP resp. IP traffic. If you want a bridging firewall, you probably 182 want this option enabled. 183 Enabling or disabling this option doesn't enable or disable 184 ebtables. 185 186 If unsure, say N. 187 188source "net/netfilter/Kconfig" 189source "net/ipv4/netfilter/Kconfig" 190source "net/ipv6/netfilter/Kconfig" 191source "net/decnet/netfilter/Kconfig" 192source "net/bridge/netfilter/Kconfig" 193 194endif 195 196source "net/dccp/Kconfig" 197source "net/sctp/Kconfig" 198source "net/rds/Kconfig" 199source "net/tipc/Kconfig" 200source "net/atm/Kconfig" 201source "net/l2tp/Kconfig" 202source "net/802/Kconfig" 203source "net/bridge/Kconfig" 204source "net/dsa/Kconfig" 205source "net/8021q/Kconfig" 206source "net/decnet/Kconfig" 207source "net/llc/Kconfig" 208source "net/ipx/Kconfig" 209source "drivers/net/appletalk/Kconfig" 210source "net/x25/Kconfig" 211source "net/lapb/Kconfig" 212source "net/phonet/Kconfig" 213source "net/ieee802154/Kconfig" 214source "net/mac802154/Kconfig" 215source "net/sched/Kconfig" 216source "net/dcb/Kconfig" 217source "net/dns_resolver/Kconfig" 218source "net/batman-adv/Kconfig" 219source "net/openvswitch/Kconfig" 220source "net/vmw_vsock/Kconfig" 221source "net/netlink/Kconfig" 222source "net/mpls/Kconfig" 223 224config RPS 225 boolean 226 depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS 227 default y 228 229config RFS_ACCEL 230 boolean 231 depends on RPS && GENERIC_HARDIRQS 232 select CPU_RMAP 233 default y 234 235config XPS 236 boolean 237 depends on SMP && USE_GENERIC_SMP_HELPERS 238 default y 239 240config NETPRIO_CGROUP 241 tristate "Network priority cgroup" 242 depends on CGROUPS 243 ---help--- 244 Cgroup subsystem for use in assigning processes to network priorities on 245 a per-interface basis 246 247config NET_RX_BUSY_POLL 248 boolean 249 default y 250 251config BQL 252 boolean 253 depends on SYSFS 254 select DQL 255 default y 256 257config BPF_JIT 258 bool "enable BPF Just In Time compiler" 259 depends on HAVE_BPF_JIT 260 depends on MODULES 261 ---help--- 262 Berkeley Packet Filter filtering capabilities are normally handled 263 by an interpreter. This option allows kernel to generate a native 264 code when filter is loaded in memory. This should speedup 265 packet sniffing (libpcap/tcpdump). Note : Admin should enable 266 this feature changing /proc/sys/net/core/bpf_jit_enable 267 268config NET_FLOW_LIMIT 269 boolean 270 depends on RPS 271 default y 272 ---help--- 273 The network stack has to drop packets when a receive processing CPU's 274 backlog reaches netdev_max_backlog. If a few out of many active flows 275 generate the vast majority of load, drop their traffic earlier to 276 maintain capacity for the other flows. This feature provides servers 277 with many clients some protection against DoS by a single (spoofed) 278 flow that greatly exceeds average workload. 279 280menu "Network testing" 281 282config NET_PKTGEN 283 tristate "Packet Generator (USE WITH CAUTION)" 284 depends on INET && PROC_FS 285 ---help--- 286 This module will inject preconfigured packets, at a configurable 287 rate, out of a given interface. It is used for network interface 288 stress testing and performance analysis. If you don't understand 289 what was just said, you don't need it: say N. 290 291 Documentation on how to use the packet generator can be found 292 at <file:Documentation/networking/pktgen.txt>. 293 294 To compile this code as a module, choose M here: the 295 module will be called pktgen. 296 297config NET_TCPPROBE 298 tristate "TCP connection probing" 299 depends on INET && PROC_FS && KPROBES 300 ---help--- 301 This module allows for capturing the changes to TCP connection 302 state in response to incoming packets. It is used for debugging 303 TCP congestion avoidance modules. If you don't understand 304 what was just said, you don't need it: say N. 305 306 Documentation on how to use TCP connection probing can be found 307 at: 308 309 http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe 310 311 To compile this code as a module, choose M here: the 312 module will be called tcp_probe. 313 314config NET_DROP_MONITOR 315 tristate "Network packet drop alerting service" 316 depends on INET && TRACEPOINTS 317 ---help--- 318 This feature provides an alerting service to userspace in the 319 event that packets are discarded in the network stack. Alerts 320 are broadcast via netlink socket to any listening user space 321 process. If you don't need network drop alerts, or if you are ok 322 just checking the various proc files and other utilities for 323 drop statistics, say N here. 324 325endmenu 326 327endmenu 328 329source "net/ax25/Kconfig" 330source "net/can/Kconfig" 331source "net/irda/Kconfig" 332source "net/bluetooth/Kconfig" 333source "net/rxrpc/Kconfig" 334 335config FIB_RULES 336 bool 337 338menuconfig WIRELESS 339 bool "Wireless" 340 depends on !S390 341 default y 342 343if WIRELESS 344 345source "net/wireless/Kconfig" 346source "net/mac80211/Kconfig" 347 348endif # WIRELESS 349 350source "net/wimax/Kconfig" 351 352source "net/rfkill/Kconfig" 353source "net/9p/Kconfig" 354source "net/caif/Kconfig" 355source "net/ceph/Kconfig" 356source "net/nfc/Kconfig" 357 358 359endif # if NET 360 361# Used by archs to tell that they support BPF_JIT 362config HAVE_BPF_JIT 363 bool 364