1# 2# Network configuration 3# 4 5menuconfig NET 6 bool "Networking support" 7 select NLATTR 8 select GENERIC_NET_UTILS 9 select BPF 10 ---help--- 11 Unless you really know what you are doing, you should say Y here. 12 The reason is that some programs need kernel networking support even 13 when running on a stand-alone machine that isn't connected to any 14 other computer. 15 16 If you are upgrading from an older kernel, you 17 should consider updating your networking tools too because changes 18 in the kernel and the tools often go hand in hand. The tools are 19 contained in the package net-tools, the location and version number 20 of which are given in <file:Documentation/Changes>. 21 22 For a general introduction to Linux networking, it is highly 23 recommended to read the NET-HOWTO, available from 24 <http://www.tldp.org/docs.html#howto>. 25 26if NET 27 28config WANT_COMPAT_NETLINK_MESSAGES 29 bool 30 help 31 This option can be selected by other options that need compat 32 netlink messages. 33 34config COMPAT_NETLINK_MESSAGES 35 def_bool y 36 depends on COMPAT 37 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 38 help 39 This option makes it possible to send different netlink messages 40 to tasks depending on whether the task is a compat task or not. To 41 achieve this, you need to set skb_shinfo(skb)->frag_list to the 42 compat skb before sending the skb, the netlink code will sort out 43 which message to actually pass to the task. 44 45 Newly written code should NEVER need this option but do 46 compat-independent messages instead! 47 48config NET_INGRESS 49 bool 50 51config NET_EGRESS 52 bool 53 54menu "Networking options" 55 56source "net/packet/Kconfig" 57source "net/unix/Kconfig" 58source "net/tls/Kconfig" 59source "net/xfrm/Kconfig" 60source "net/iucv/Kconfig" 61source "net/smc/Kconfig" 62 63config INET 64 bool "TCP/IP networking" 65 select CRYPTO 66 select CRYPTO_AES 67 ---help--- 68 These are the protocols used on the Internet and on most local 69 Ethernets. It is highly recommended to say Y here (this will enlarge 70 your kernel by about 400 KB), since some programs (e.g. the X window 71 system) use TCP/IP even if your machine is not connected to any 72 other computer. You will get the so-called loopback device which 73 allows you to ping yourself (great fun, that!). 74 75 For an excellent introduction to Linux networking, please read the 76 Linux Networking HOWTO, available from 77 <http://www.tldp.org/docs.html#howto>. 78 79 If you say Y here and also to "/proc file system support" and 80 "Sysctl support" below, you can change various aspects of the 81 behavior of the TCP/IP code by writing to the (virtual) files in 82 /proc/sys/net/ipv4/*; the options are explained in the file 83 <file:Documentation/networking/ip-sysctl.txt>. 84 85 Short answer: say Y. 86 87if INET 88source "net/ipv4/Kconfig" 89source "net/ipv6/Kconfig" 90source "net/netlabel/Kconfig" 91 92endif # if INET 93 94config NETWORK_SECMARK 95 bool "Security Marking" 96 help 97 This enables security marking of network packets, similar 98 to nfmark, but designated for security purposes. 99 If you are unsure how to answer this question, answer N. 100 101config NET_PTP_CLASSIFY 102 def_bool n 103 104config NETWORK_PHY_TIMESTAMPING 105 bool "Timestamping in PHY devices" 106 select NET_PTP_CLASSIFY 107 help 108 This allows timestamping of network packets by PHYs with 109 hardware timestamping capabilities. This option adds some 110 overhead in the transmit and receive paths. 111 112 If you are unsure how to answer this question, answer N. 113 114menuconfig NETFILTER 115 bool "Network packet filtering framework (Netfilter)" 116 ---help--- 117 Netfilter is a framework for filtering and mangling network packets 118 that pass through your Linux box. 119 120 The most common use of packet filtering is to run your Linux box as 121 a firewall protecting a local network from the Internet. The type of 122 firewall provided by this kernel support is called a "packet 123 filter", which means that it can reject individual network packets 124 based on type, source, destination etc. The other kind of firewall, 125 a "proxy-based" one, is more secure but more intrusive and more 126 bothersome to set up; it inspects the network traffic much more 127 closely, modifies it and has knowledge about the higher level 128 protocols, which a packet filter lacks. Moreover, proxy-based 129 firewalls often require changes to the programs running on the local 130 clients. Proxy-based firewalls don't need support by the kernel, but 131 they are often combined with a packet filter, which only works if 132 you say Y here. 133 134 You should also say Y here if you intend to use your Linux box as 135 the gateway to the Internet for a local network of machines without 136 globally valid IP addresses. This is called "masquerading": if one 137 of the computers on your local network wants to send something to 138 the outside, your box can "masquerade" as that computer, i.e. it 139 forwards the traffic to the intended outside destination, but 140 modifies the packets to make it look like they came from the 141 firewall box itself. It works both ways: if the outside host 142 replies, the Linux box will silently forward the traffic to the 143 correct local computer. This way, the computers on your local net 144 are completely invisible to the outside world, even though they can 145 reach the outside and can receive replies. It is even possible to 146 run globally visible servers from within a masqueraded local network 147 using a mechanism called portforwarding. Masquerading is also often 148 called NAT (Network Address Translation). 149 150 Another use of Netfilter is in transparent proxying: if a machine on 151 the local network tries to connect to an outside host, your Linux 152 box can transparently forward the traffic to a local server, 153 typically a caching proxy server. 154 155 Yet another use of Netfilter is building a bridging firewall. Using 156 a bridge with Network packet filtering enabled makes iptables "see" 157 the bridged traffic. For filtering on the lower network and Ethernet 158 protocols over the bridge, use ebtables (under bridge netfilter 159 configuration). 160 161 Various modules exist for netfilter which replace the previous 162 masquerading (ipmasqadm), packet filtering (ipchains), transparent 163 proxying, and portforwarding mechanisms. Please see 164 <file:Documentation/Changes> under "iptables" for the location of 165 these packages. 166 167if NETFILTER 168 169config NETFILTER_ADVANCED 170 bool "Advanced netfilter configuration" 171 depends on NETFILTER 172 default y 173 help 174 If you say Y here you can select between all the netfilter modules. 175 If you say N the more unusual ones will not be shown and the 176 basic ones needed by most people will default to 'M'. 177 178 If unsure, say Y. 179 180config BRIDGE_NETFILTER 181 tristate "Bridged IP/ARP packets filtering" 182 depends on BRIDGE 183 depends on NETFILTER && INET 184 depends on NETFILTER_ADVANCED 185 select NETFILTER_FAMILY_BRIDGE 186 default m 187 ---help--- 188 Enabling this option will let arptables resp. iptables see bridged 189 ARP resp. IP traffic. If you want a bridging firewall, you probably 190 want this option enabled. 191 Enabling or disabling this option doesn't enable or disable 192 ebtables. 193 194 If unsure, say N. 195 196source "net/netfilter/Kconfig" 197source "net/ipv4/netfilter/Kconfig" 198source "net/ipv6/netfilter/Kconfig" 199source "net/decnet/netfilter/Kconfig" 200source "net/bridge/netfilter/Kconfig" 201 202endif 203 204source "net/dccp/Kconfig" 205source "net/sctp/Kconfig" 206source "net/rds/Kconfig" 207source "net/tipc/Kconfig" 208source "net/atm/Kconfig" 209source "net/l2tp/Kconfig" 210source "net/802/Kconfig" 211source "net/bridge/Kconfig" 212source "net/dsa/Kconfig" 213source "net/8021q/Kconfig" 214source "net/decnet/Kconfig" 215source "net/llc/Kconfig" 216source "drivers/net/appletalk/Kconfig" 217source "net/x25/Kconfig" 218source "net/lapb/Kconfig" 219source "net/phonet/Kconfig" 220source "net/6lowpan/Kconfig" 221source "net/ieee802154/Kconfig" 222source "net/mac802154/Kconfig" 223source "net/sched/Kconfig" 224source "net/dcb/Kconfig" 225source "net/dns_resolver/Kconfig" 226source "net/batman-adv/Kconfig" 227source "net/openvswitch/Kconfig" 228source "net/vmw_vsock/Kconfig" 229source "net/netlink/Kconfig" 230source "net/mpls/Kconfig" 231source "net/nsh/Kconfig" 232source "net/hsr/Kconfig" 233source "net/switchdev/Kconfig" 234source "net/l3mdev/Kconfig" 235source "net/qrtr/Kconfig" 236source "net/ncsi/Kconfig" 237 238config RPS 239 bool 240 depends on SMP && SYSFS 241 default y 242 243config RFS_ACCEL 244 bool 245 depends on RPS 246 select CPU_RMAP 247 default y 248 249config XPS 250 bool 251 depends on SMP 252 default y 253 254config HWBM 255 bool 256 257config CGROUP_NET_PRIO 258 bool "Network priority cgroup" 259 depends on CGROUPS 260 select SOCK_CGROUP_DATA 261 ---help--- 262 Cgroup subsystem for use in assigning processes to network priorities on 263 a per-interface basis. 264 265config CGROUP_NET_CLASSID 266 bool "Network classid cgroup" 267 depends on CGROUPS 268 select SOCK_CGROUP_DATA 269 ---help--- 270 Cgroup subsystem for use as general purpose socket classid marker that is 271 being used in cls_cgroup and for netfilter matching. 272 273config NET_RX_BUSY_POLL 274 bool 275 default y 276 277config BQL 278 bool 279 depends on SYSFS 280 select DQL 281 default y 282 283config BPF_JIT 284 bool "enable BPF Just In Time compiler" 285 depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT 286 depends on MODULES 287 ---help--- 288 Berkeley Packet Filter filtering capabilities are normally handled 289 by an interpreter. This option allows kernel to generate a native 290 code when filter is loaded in memory. This should speedup 291 packet sniffing (libpcap/tcpdump). 292 293 Note, admin should enable this feature changing: 294 /proc/sys/net/core/bpf_jit_enable 295 /proc/sys/net/core/bpf_jit_harden (optional) 296 /proc/sys/net/core/bpf_jit_kallsyms (optional) 297 298config BPF_STREAM_PARSER 299 bool "enable BPF STREAM_PARSER" 300 depends on BPF_SYSCALL 301 select STREAM_PARSER 302 ---help--- 303 Enabling this allows a stream parser to be used with 304 BPF_MAP_TYPE_SOCKMAP. 305 306 BPF_MAP_TYPE_SOCKMAP provides a map type to use with network sockets. 307 It can be used to enforce socket policy, implement socket redirects, 308 etc. 309 310config NET_FLOW_LIMIT 311 bool 312 depends on RPS 313 default y 314 ---help--- 315 The network stack has to drop packets when a receive processing CPU's 316 backlog reaches netdev_max_backlog. If a few out of many active flows 317 generate the vast majority of load, drop their traffic earlier to 318 maintain capacity for the other flows. This feature provides servers 319 with many clients some protection against DoS by a single (spoofed) 320 flow that greatly exceeds average workload. 321 322menu "Network testing" 323 324config NET_PKTGEN 325 tristate "Packet Generator (USE WITH CAUTION)" 326 depends on INET && PROC_FS 327 ---help--- 328 This module will inject preconfigured packets, at a configurable 329 rate, out of a given interface. It is used for network interface 330 stress testing and performance analysis. If you don't understand 331 what was just said, you don't need it: say N. 332 333 Documentation on how to use the packet generator can be found 334 at <file:Documentation/networking/pktgen.txt>. 335 336 To compile this code as a module, choose M here: the 337 module will be called pktgen. 338 339config NET_DROP_MONITOR 340 tristate "Network packet drop alerting service" 341 depends on INET && TRACEPOINTS 342 ---help--- 343 This feature provides an alerting service to userspace in the 344 event that packets are discarded in the network stack. Alerts 345 are broadcast via netlink socket to any listening user space 346 process. If you don't need network drop alerts, or if you are ok 347 just checking the various proc files and other utilities for 348 drop statistics, say N here. 349 350endmenu 351 352endmenu 353 354source "net/ax25/Kconfig" 355source "net/can/Kconfig" 356source "net/bluetooth/Kconfig" 357source "net/rxrpc/Kconfig" 358source "net/kcm/Kconfig" 359source "net/strparser/Kconfig" 360 361config FIB_RULES 362 bool 363 364menuconfig WIRELESS 365 bool "Wireless" 366 depends on !S390 367 default y 368 369if WIRELESS 370 371source "net/wireless/Kconfig" 372source "net/mac80211/Kconfig" 373 374endif # WIRELESS 375 376source "net/wimax/Kconfig" 377 378source "net/rfkill/Kconfig" 379source "net/9p/Kconfig" 380source "net/caif/Kconfig" 381source "net/ceph/Kconfig" 382source "net/nfc/Kconfig" 383source "net/psample/Kconfig" 384source "net/ife/Kconfig" 385 386config LWTUNNEL 387 bool "Network light weight tunnels" 388 ---help--- 389 This feature provides an infrastructure to support light weight 390 tunnels like mpls. There is no netdevice associated with a light 391 weight tunnel endpoint. Tunnel encapsulation parameters are stored 392 with light weight tunnel state associated with fib routes. 393 394config LWTUNNEL_BPF 395 bool "Execute BPF program as route nexthop action" 396 depends on LWTUNNEL 397 default y if LWTUNNEL=y 398 ---help--- 399 Allows to run BPF programs as a nexthop action following a route 400 lookup for incoming and outgoing packets. 401 402config DST_CACHE 403 bool 404 default n 405 406config GRO_CELLS 407 bool 408 default n 409 410config NET_DEVLINK 411 tristate "Network physical/parent device Netlink interface" 412 help 413 Network physical/parent device Netlink interface provides 414 infrastructure to support access to physical chip-wide config and 415 monitoring. 416 417config MAY_USE_DEVLINK 418 tristate 419 default m if NET_DEVLINK=m 420 default y if NET_DEVLINK=y || NET_DEVLINK=n 421 help 422 Drivers using the devlink infrastructure should have a dependency 423 on MAY_USE_DEVLINK to ensure they do not cause link errors when 424 devlink is a loadable module and the driver using it is built-in. 425 426endif # if NET 427 428# Used by archs to tell that they support BPF JIT compiler plus which flavour. 429# Only one of the two can be selected for a specific arch since eBPF JIT supersedes 430# the cBPF JIT. 431 432# Classic BPF JIT (cBPF) 433config HAVE_CBPF_JIT 434 bool 435 436# Extended BPF JIT (eBPF) 437config HAVE_EBPF_JIT 438 bool 439