1# 2# Network configuration 3# 4 5menuconfig NET 6 bool "Networking support" 7 select NLATTR 8 ---help--- 9 Unless you really know what you are doing, you should say Y here. 10 The reason is that some programs need kernel networking support even 11 when running on a stand-alone machine that isn't connected to any 12 other computer. 13 14 If you are upgrading from an older kernel, you 15 should consider updating your networking tools too because changes 16 in the kernel and the tools often go hand in hand. The tools are 17 contained in the package net-tools, the location and version number 18 of which are given in <file:Documentation/Changes>. 19 20 For a general introduction to Linux networking, it is highly 21 recommended to read the NET-HOWTO, available from 22 <http://www.tldp.org/docs.html#howto>. 23 24if NET 25 26config WANT_COMPAT_NETLINK_MESSAGES 27 bool 28 help 29 This option can be selected by other options that need compat 30 netlink messages. 31 32config COMPAT_NETLINK_MESSAGES 33 def_bool y 34 depends on COMPAT 35 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 36 help 37 This option makes it possible to send different netlink messages 38 to tasks depending on whether the task is a compat task or not. To 39 achieve this, you need to set skb_shinfo(skb)->frag_list to the 40 compat skb before sending the skb, the netlink code will sort out 41 which message to actually pass to the task. 42 43 Newly written code should NEVER need this option but do 44 compat-independent messages instead! 45 46menu "Networking options" 47 48source "net/packet/Kconfig" 49source "net/unix/Kconfig" 50source "net/xfrm/Kconfig" 51source "net/iucv/Kconfig" 52 53config INET 54 bool "TCP/IP networking" 55 select CRYPTO 56 select CRYPTO_AES 57 ---help--- 58 These are the protocols used on the Internet and on most local 59 Ethernets. It is highly recommended to say Y here (this will enlarge 60 your kernel by about 400 KB), since some programs (e.g. the X window 61 system) use TCP/IP even if your machine is not connected to any 62 other computer. You will get the so-called loopback device which 63 allows you to ping yourself (great fun, that!). 64 65 For an excellent introduction to Linux networking, please read the 66 Linux Networking HOWTO, available from 67 <http://www.tldp.org/docs.html#howto>. 68 69 If you say Y here and also to "/proc file system support" and 70 "Sysctl support" below, you can change various aspects of the 71 behavior of the TCP/IP code by writing to the (virtual) files in 72 /proc/sys/net/ipv4/*; the options are explained in the file 73 <file:Documentation/networking/ip-sysctl.txt>. 74 75 Short answer: say Y. 76 77if INET 78source "net/ipv4/Kconfig" 79source "net/ipv6/Kconfig" 80source "net/netlabel/Kconfig" 81 82endif # if INET 83 84config NETWORK_SECMARK 85 bool "Security Marking" 86 help 87 This enables security marking of network packets, similar 88 to nfmark, but designated for security purposes. 89 If you are unsure how to answer this question, answer N. 90 91config NETWORK_PHY_TIMESTAMPING 92 bool "Timestamping in PHY devices" 93 depends on EXPERIMENTAL 94 help 95 This allows timestamping of network packets by PHYs with 96 hardware timestamping capabilities. This option adds some 97 overhead in the transmit and receive paths. 98 99 If you are unsure how to answer this question, answer N. 100 101menuconfig NETFILTER 102 bool "Network packet filtering framework (Netfilter)" 103 ---help--- 104 Netfilter is a framework for filtering and mangling network packets 105 that pass through your Linux box. 106 107 The most common use of packet filtering is to run your Linux box as 108 a firewall protecting a local network from the Internet. The type of 109 firewall provided by this kernel support is called a "packet 110 filter", which means that it can reject individual network packets 111 based on type, source, destination etc. The other kind of firewall, 112 a "proxy-based" one, is more secure but more intrusive and more 113 bothersome to set up; it inspects the network traffic much more 114 closely, modifies it and has knowledge about the higher level 115 protocols, which a packet filter lacks. Moreover, proxy-based 116 firewalls often require changes to the programs running on the local 117 clients. Proxy-based firewalls don't need support by the kernel, but 118 they are often combined with a packet filter, which only works if 119 you say Y here. 120 121 You should also say Y here if you intend to use your Linux box as 122 the gateway to the Internet for a local network of machines without 123 globally valid IP addresses. This is called "masquerading": if one 124 of the computers on your local network wants to send something to 125 the outside, your box can "masquerade" as that computer, i.e. it 126 forwards the traffic to the intended outside destination, but 127 modifies the packets to make it look like they came from the 128 firewall box itself. It works both ways: if the outside host 129 replies, the Linux box will silently forward the traffic to the 130 correct local computer. This way, the computers on your local net 131 are completely invisible to the outside world, even though they can 132 reach the outside and can receive replies. It is even possible to 133 run globally visible servers from within a masqueraded local network 134 using a mechanism called portforwarding. Masquerading is also often 135 called NAT (Network Address Translation). 136 137 Another use of Netfilter is in transparent proxying: if a machine on 138 the local network tries to connect to an outside host, your Linux 139 box can transparently forward the traffic to a local server, 140 typically a caching proxy server. 141 142 Yet another use of Netfilter is building a bridging firewall. Using 143 a bridge with Network packet filtering enabled makes iptables "see" 144 the bridged traffic. For filtering on the lower network and Ethernet 145 protocols over the bridge, use ebtables (under bridge netfilter 146 configuration). 147 148 Various modules exist for netfilter which replace the previous 149 masquerading (ipmasqadm), packet filtering (ipchains), transparent 150 proxying, and portforwarding mechanisms. Please see 151 <file:Documentation/Changes> under "iptables" for the location of 152 these packages. 153 154if NETFILTER 155 156config NETFILTER_DEBUG 157 bool "Network packet filtering debugging" 158 depends on NETFILTER 159 help 160 You can say Y here if you want to get additional messages useful in 161 debugging the netfilter code. 162 163config NETFILTER_ADVANCED 164 bool "Advanced netfilter configuration" 165 depends on NETFILTER 166 default y 167 help 168 If you say Y here you can select between all the netfilter modules. 169 If you say N the more unusual ones will not be shown and the 170 basic ones needed by most people will default to 'M'. 171 172 If unsure, say Y. 173 174config BRIDGE_NETFILTER 175 bool "Bridged IP/ARP packets filtering" 176 depends on BRIDGE && NETFILTER && INET 177 depends on NETFILTER_ADVANCED 178 default y 179 ---help--- 180 Enabling this option will let arptables resp. iptables see bridged 181 ARP resp. IP traffic. If you want a bridging firewall, you probably 182 want this option enabled. 183 Enabling or disabling this option doesn't enable or disable 184 ebtables. 185 186 If unsure, say N. 187 188source "net/netfilter/Kconfig" 189source "net/ipv4/netfilter/Kconfig" 190source "net/ipv6/netfilter/Kconfig" 191source "net/decnet/netfilter/Kconfig" 192source "net/bridge/netfilter/Kconfig" 193 194endif 195 196source "net/dccp/Kconfig" 197source "net/sctp/Kconfig" 198source "net/rds/Kconfig" 199source "net/tipc/Kconfig" 200source "net/atm/Kconfig" 201source "net/l2tp/Kconfig" 202source "net/802/Kconfig" 203source "net/bridge/Kconfig" 204source "net/dsa/Kconfig" 205source "net/8021q/Kconfig" 206source "net/decnet/Kconfig" 207source "net/llc/Kconfig" 208source "net/ipx/Kconfig" 209source "drivers/net/appletalk/Kconfig" 210source "net/x25/Kconfig" 211source "net/lapb/Kconfig" 212source "net/wanrouter/Kconfig" 213source "net/phonet/Kconfig" 214source "net/ieee802154/Kconfig" 215source "net/mac802154/Kconfig" 216source "net/sched/Kconfig" 217source "net/dcb/Kconfig" 218source "net/dns_resolver/Kconfig" 219source "net/batman-adv/Kconfig" 220source "net/openvswitch/Kconfig" 221 222config RPS 223 boolean 224 depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS 225 default y 226 227config RFS_ACCEL 228 boolean 229 depends on RPS && GENERIC_HARDIRQS 230 select CPU_RMAP 231 default y 232 233config XPS 234 boolean 235 depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS 236 default y 237 238config NETPRIO_CGROUP 239 tristate "Network priority cgroup" 240 depends on CGROUPS 241 ---help--- 242 Cgroup subsystem for use in assigning processes to network priorities on 243 a per-interface basis 244 245config BQL 246 boolean 247 depends on SYSFS 248 select DQL 249 default y 250 251config BPF_JIT 252 bool "enable BPF Just In Time compiler" 253 depends on HAVE_BPF_JIT 254 depends on MODULES 255 ---help--- 256 Berkeley Packet Filter filtering capabilities are normally handled 257 by an interpreter. This option allows kernel to generate a native 258 code when filter is loaded in memory. This should speedup 259 packet sniffing (libpcap/tcpdump). Note : Admin should enable 260 this feature changing /proc/sys/net/core/bpf_jit_enable 261 262menu "Network testing" 263 264config NET_PKTGEN 265 tristate "Packet Generator (USE WITH CAUTION)" 266 depends on PROC_FS 267 ---help--- 268 This module will inject preconfigured packets, at a configurable 269 rate, out of a given interface. It is used for network interface 270 stress testing and performance analysis. If you don't understand 271 what was just said, you don't need it: say N. 272 273 Documentation on how to use the packet generator can be found 274 at <file:Documentation/networking/pktgen.txt>. 275 276 To compile this code as a module, choose M here: the 277 module will be called pktgen. 278 279config NET_TCPPROBE 280 tristate "TCP connection probing" 281 depends on INET && EXPERIMENTAL && PROC_FS && KPROBES 282 ---help--- 283 This module allows for capturing the changes to TCP connection 284 state in response to incoming packets. It is used for debugging 285 TCP congestion avoidance modules. If you don't understand 286 what was just said, you don't need it: say N. 287 288 Documentation on how to use TCP connection probing can be found 289 at: 290 291 http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe 292 293 To compile this code as a module, choose M here: the 294 module will be called tcp_probe. 295 296config NET_DROP_MONITOR 297 tristate "Network packet drop alerting service" 298 depends on INET && EXPERIMENTAL && TRACEPOINTS 299 ---help--- 300 This feature provides an alerting service to userspace in the 301 event that packets are discarded in the network stack. Alerts 302 are broadcast via netlink socket to any listening user space 303 process. If you don't need network drop alerts, or if you are ok 304 just checking the various proc files and other utilities for 305 drop statistics, say N here. 306 307endmenu 308 309endmenu 310 311source "net/ax25/Kconfig" 312source "net/can/Kconfig" 313source "net/irda/Kconfig" 314source "net/bluetooth/Kconfig" 315source "net/rxrpc/Kconfig" 316 317config FIB_RULES 318 bool 319 320menuconfig WIRELESS 321 bool "Wireless" 322 depends on !S390 323 default y 324 325if WIRELESS 326 327source "net/wireless/Kconfig" 328source "net/mac80211/Kconfig" 329 330endif # WIRELESS 331 332source "net/wimax/Kconfig" 333 334source "net/rfkill/Kconfig" 335source "net/9p/Kconfig" 336source "net/caif/Kconfig" 337source "net/ceph/Kconfig" 338source "net/nfc/Kconfig" 339 340 341endif # if NET 342 343# Used by archs to tell that they support BPF_JIT 344config HAVE_BPF_JIT 345 bool 346