xref: /openbmc/linux/net/802/hippi.c (revision 5b394b2d)
1 /*
2  * INET		An implementation of the TCP/IP protocol suite for the LINUX
3  *		operating system.  INET is implemented using the  BSD Socket
4  *		interface as the means of communication with the user level.
5  *
6  *		HIPPI-type device handling.
7  *
8  * Version:	@(#)hippi.c	1.0.0	05/29/97
9  *
10  * Authors:	Ross Biro
11  *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12  *		Mark Evans, <evansmp@uhura.aston.ac.uk>
13  *		Florian  La Roche, <rzsfl@rz.uni-sb.de>
14  *		Alan Cox, <gw4pts@gw4pts.ampr.org>
15  *		Jes Sorensen, <Jes.Sorensen@cern.ch>
16  *
17  *		This program is free software; you can redistribute it and/or
18  *		modify it under the terms of the GNU General Public License
19  *		as published by the Free Software Foundation; either version
20  *		2 of the License, or (at your option) any later version.
21  */
22 
23 #include <linux/module.h>
24 #include <linux/types.h>
25 #include <linux/kernel.h>
26 #include <linux/string.h>
27 #include <linux/mm.h>
28 #include <linux/socket.h>
29 #include <linux/in.h>
30 #include <linux/inet.h>
31 #include <linux/netdevice.h>
32 #include <linux/hippidevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/errno.h>
35 #include <net/arp.h>
36 #include <net/sock.h>
37 #include <linux/uaccess.h>
38 
39 /*
40  * Create the HIPPI MAC header for an arbitrary protocol layer
41  *
42  * saddr=NULL	means use device source address
43  * daddr=NULL	means leave destination address (eg unresolved arp)
44  */
45 
46 static int hippi_header(struct sk_buff *skb, struct net_device *dev,
47 			unsigned short type,
48 			const void *daddr, const void *saddr, unsigned int len)
49 {
50 	struct hippi_hdr *hip = skb_push(skb, HIPPI_HLEN);
51 	struct hippi_cb *hcb = (struct hippi_cb *) skb->cb;
52 
53 	if (!len){
54 		len = skb->len - HIPPI_HLEN;
55 		printk("hippi_header(): length not supplied\n");
56 	}
57 
58 	/*
59 	 * Due to the stupidity of the little endian byte-order we
60 	 * have to set the fp field this way.
61 	 */
62 	hip->fp.fixed		= htonl(0x04800018);
63 	hip->fp.d2_size		= htonl(len + 8);
64 	hip->le.fc		= 0;
65 	hip->le.double_wide	= 0;	/* only HIPPI 800 for the time being */
66 	hip->le.message_type	= 0;	/* Data PDU */
67 
68 	hip->le.dest_addr_type	= 2;	/* 12 bit SC address */
69 	hip->le.src_addr_type	= 2;	/* 12 bit SC address */
70 
71 	memcpy(hip->le.src_switch_addr, dev->dev_addr + 3, 3);
72 	memset(&hip->le.reserved, 0, 16);
73 
74 	hip->snap.dsap		= HIPPI_EXTENDED_SAP;
75 	hip->snap.ssap		= HIPPI_EXTENDED_SAP;
76 	hip->snap.ctrl		= HIPPI_UI_CMD;
77 	hip->snap.oui[0]	= 0x00;
78 	hip->snap.oui[1]	= 0x00;
79 	hip->snap.oui[2]	= 0x00;
80 	hip->snap.ethertype	= htons(type);
81 
82 	if (daddr)
83 	{
84 		memcpy(hip->le.dest_switch_addr, daddr + 3, 3);
85 		memcpy(&hcb->ifield, daddr + 2, 4);
86 		return HIPPI_HLEN;
87 	}
88 	hcb->ifield = 0;
89 	return -((int)HIPPI_HLEN);
90 }
91 
92 
93 /*
94  *	Determine the packet's protocol ID.
95  */
96 
97 __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev)
98 {
99 	struct hippi_hdr *hip;
100 
101 	/*
102 	 * This is actually wrong ... question is if we really should
103 	 * set the raw address here.
104 	 */
105 	skb->dev = dev;
106 	skb_reset_mac_header(skb);
107 	hip = (struct hippi_hdr *)skb_mac_header(skb);
108 	skb_pull(skb, HIPPI_HLEN);
109 
110 	/*
111 	 * No fancy promisc stuff here now.
112 	 */
113 
114 	return hip->snap.ethertype;
115 }
116 
117 EXPORT_SYMBOL(hippi_type_trans);
118 
119 /*
120  * For HIPPI we will actually use the lower 4 bytes of the hardware
121  * address as the I-FIELD rather than the actual hardware address.
122  */
123 int hippi_mac_addr(struct net_device *dev, void *p)
124 {
125 	struct sockaddr *addr = p;
126 	if (netif_running(dev))
127 		return -EBUSY;
128 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
129 	return 0;
130 }
131 EXPORT_SYMBOL(hippi_mac_addr);
132 
133 int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
134 {
135 	/* Never send broadcast/multicast ARP messages */
136 	NEIGH_VAR_INIT(p, MCAST_PROBES, 0);
137 
138 	/* In IPv6 unicast probes are valid even on NBMA,
139 	* because they are encapsulated in normal IPv6 protocol.
140 	* Should be a generic flag.
141 	*/
142 	if (p->tbl->family != AF_INET6)
143 		NEIGH_VAR_INIT(p, UCAST_PROBES, 0);
144 	return 0;
145 }
146 EXPORT_SYMBOL(hippi_neigh_setup_dev);
147 
148 static const struct header_ops hippi_header_ops = {
149 	.create		= hippi_header,
150 };
151 
152 
153 static void hippi_setup(struct net_device *dev)
154 {
155 	dev->header_ops			= &hippi_header_ops;
156 
157 	/*
158 	 * We don't support HIPPI `ARP' for the time being, and probably
159 	 * never will unless someone else implements it. However we
160 	 * still need a fake ARPHRD to make ifconfig and friends play ball.
161 	 */
162 	dev->type		= ARPHRD_HIPPI;
163 	dev->hard_header_len 	= HIPPI_HLEN;
164 	dev->mtu		= 65280;
165 	dev->min_mtu		= 68;
166 	dev->max_mtu		= 65280;
167 	dev->addr_len		= HIPPI_ALEN;
168 	dev->tx_queue_len	= 25 /* 5 */;
169 	memset(dev->broadcast, 0xFF, HIPPI_ALEN);
170 
171 
172 	/*
173 	 * HIPPI doesn't support broadcast+multicast and we only use
174 	 * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
175 	 */
176 	dev->flags = 0;
177 }
178 
179 /**
180  * alloc_hippi_dev - Register HIPPI device
181  * @sizeof_priv: Size of additional driver-private structure to be allocated
182  *	for this HIPPI device
183  *
184  * Fill in the fields of the device structure with HIPPI-generic values.
185  *
186  * Constructs a new net device, complete with a private data area of
187  * size @sizeof_priv.  A 32-byte (not bit) alignment is enforced for
188  * this private data area.
189  */
190 
191 struct net_device *alloc_hippi_dev(int sizeof_priv)
192 {
193 	return alloc_netdev(sizeof_priv, "hip%d", NET_NAME_UNKNOWN,
194 			    hippi_setup);
195 }
196 
197 EXPORT_SYMBOL(alloc_hippi_dev);
198