xref: /openbmc/linux/mm/damon/lru_sort.c (revision 975aaadd)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * DAMON-based LRU-lists Sorting
4  *
5  * Author: SeongJae Park <sj@kernel.org>
6  */
7 
8 #define pr_fmt(fmt) "damon-lru-sort: " fmt
9 
10 #include <linux/damon.h>
11 #include <linux/kstrtox.h>
12 #include <linux/module.h>
13 
14 #include "modules-common.h"
15 
16 #ifdef MODULE_PARAM_PREFIX
17 #undef MODULE_PARAM_PREFIX
18 #endif
19 #define MODULE_PARAM_PREFIX "damon_lru_sort."
20 
21 /*
22  * Enable or disable DAMON_LRU_SORT.
23  *
24  * You can enable DAMON_LRU_SORT by setting the value of this parameter as
25  * ``Y``.  Setting it as ``N`` disables DAMON_LRU_SORT.  Note that
26  * DAMON_LRU_SORT could do no real monitoring and LRU-lists sorting due to the
27  * watermarks-based activation condition.  Refer to below descriptions for the
28  * watermarks parameter for this.
29  */
30 static bool enabled __read_mostly;
31 
32 /*
33  * Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``.
34  *
35  * Input parameters that updated while DAMON_LRU_SORT is running are not
36  * applied by default.  Once this parameter is set as ``Y``, DAMON_LRU_SORT
37  * reads values of parametrs except ``enabled`` again.  Once the re-reading is
38  * done, this parameter is set as ``N``.  If invalid parameters are found while
39  * the re-reading, DAMON_LRU_SORT will be disabled.
40  */
41 static bool commit_inputs __read_mostly;
42 module_param(commit_inputs, bool, 0600);
43 
44 /*
45  * Access frequency threshold for hot memory regions identification in permil.
46  *
47  * If a memory region is accessed in frequency of this or higher,
48  * DAMON_LRU_SORT identifies the region as hot, and mark it as accessed on the
49  * LRU list, so that it could not be reclaimed under memory pressure.  50% by
50  * default.
51  */
52 static unsigned long hot_thres_access_freq = 500;
53 module_param(hot_thres_access_freq, ulong, 0600);
54 
55 /*
56  * Time threshold for cold memory regions identification in microseconds.
57  *
58  * If a memory region is not accessed for this or longer time, DAMON_LRU_SORT
59  * identifies the region as cold, and mark it as unaccessed on the LRU list, so
60  * that it could be reclaimed first under memory pressure.  120 seconds by
61  * default.
62  */
63 static unsigned long cold_min_age __read_mostly = 120000000;
64 module_param(cold_min_age, ulong, 0600);
65 
66 static struct damos_quota damon_lru_sort_quota = {
67 	/* Use up to 10 ms per 1 sec, by default */
68 	.ms = 10,
69 	.sz = 0,
70 	.reset_interval = 1000,
71 	/* Within the quota, mark hotter regions accessed first. */
72 	.weight_sz = 0,
73 	.weight_nr_accesses = 1,
74 	.weight_age = 0,
75 };
76 DEFINE_DAMON_MODULES_DAMOS_TIME_QUOTA(damon_lru_sort_quota);
77 
78 static struct damos_watermarks damon_lru_sort_wmarks = {
79 	.metric = DAMOS_WMARK_FREE_MEM_RATE,
80 	.interval = 5000000,	/* 5 seconds */
81 	.high = 200,		/* 20 percent */
82 	.mid = 150,		/* 15 percent */
83 	.low = 50,		/* 5 percent */
84 };
85 DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_lru_sort_wmarks);
86 
87 static struct damon_attrs damon_lru_sort_mon_attrs = {
88 	.sample_interval = 5000,	/* 5 ms */
89 	.aggr_interval = 100000,	/* 100 ms */
90 	.ops_update_interval = 0,
91 	.min_nr_regions = 10,
92 	.max_nr_regions = 1000,
93 };
94 DEFINE_DAMON_MODULES_MON_ATTRS_PARAMS(damon_lru_sort_mon_attrs);
95 
96 /*
97  * Start of the target memory region in physical address.
98  *
99  * The start physical address of memory region that DAMON_LRU_SORT will do work
100  * against.  By default, biggest System RAM is used as the region.
101  */
102 static unsigned long monitor_region_start __read_mostly;
103 module_param(monitor_region_start, ulong, 0600);
104 
105 /*
106  * End of the target memory region in physical address.
107  *
108  * The end physical address of memory region that DAMON_LRU_SORT will do work
109  * against.  By default, biggest System RAM is used as the region.
110  */
111 static unsigned long monitor_region_end __read_mostly;
112 module_param(monitor_region_end, ulong, 0600);
113 
114 /*
115  * PID of the DAMON thread
116  *
117  * If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread.
118  * Else, -1.
119  */
120 static int kdamond_pid __read_mostly = -1;
121 module_param(kdamond_pid, int, 0400);
122 
123 static struct damos_stat damon_lru_sort_hot_stat;
124 DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_hot_stat,
125 		lru_sort_tried_hot_regions, lru_sorted_hot_regions,
126 		hot_quota_exceeds);
127 
128 static struct damos_stat damon_lru_sort_cold_stat;
129 DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_cold_stat,
130 		lru_sort_tried_cold_regions, lru_sorted_cold_regions,
131 		cold_quota_exceeds);
132 
133 static struct damos_access_pattern damon_lru_sort_stub_pattern = {
134 	/* Find regions having PAGE_SIZE or larger size */
135 	.min_sz_region = PAGE_SIZE,
136 	.max_sz_region = ULONG_MAX,
137 	/* no matter its access frequency */
138 	.min_nr_accesses = 0,
139 	.max_nr_accesses = UINT_MAX,
140 	/* no matter its age */
141 	.min_age_region = 0,
142 	.max_age_region = UINT_MAX,
143 };
144 
145 static struct damon_ctx *ctx;
146 static struct damon_target *target;
147 
148 static struct damos *damon_lru_sort_new_scheme(
149 		struct damos_access_pattern *pattern, enum damos_action action)
150 {
151 	struct damos_quota quota = damon_lru_sort_quota;
152 
153 	/* Use half of total quota for hot/cold pages sorting */
154 	quota.ms = quota.ms / 2;
155 
156 	return damon_new_scheme(
157 			/* find the pattern, and */
158 			pattern,
159 			/* (de)prioritize on LRU-lists */
160 			action,
161 			/* under the quota. */
162 			&quota,
163 			/* (De)activate this according to the watermarks. */
164 			&damon_lru_sort_wmarks);
165 }
166 
167 /* Create a DAMON-based operation scheme for hot memory regions */
168 static struct damos *damon_lru_sort_new_hot_scheme(unsigned int hot_thres)
169 {
170 	struct damos_access_pattern pattern = damon_lru_sort_stub_pattern;
171 
172 	pattern.min_nr_accesses = hot_thres;
173 	return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_PRIO);
174 }
175 
176 /* Create a DAMON-based operation scheme for cold memory regions */
177 static struct damos *damon_lru_sort_new_cold_scheme(unsigned int cold_thres)
178 {
179 	struct damos_access_pattern pattern = damon_lru_sort_stub_pattern;
180 
181 	pattern.max_nr_accesses = 0;
182 	pattern.min_age_region = cold_thres;
183 	return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_DEPRIO);
184 }
185 
186 static int damon_lru_sort_apply_parameters(void)
187 {
188 	struct damos *scheme;
189 	unsigned int hot_thres, cold_thres;
190 	int err = 0;
191 
192 	err = damon_set_attrs(ctx, &damon_lru_sort_mon_attrs);
193 	if (err)
194 		return err;
195 
196 	hot_thres = damon_max_nr_accesses(&damon_lru_sort_mon_attrs) *
197 		hot_thres_access_freq / 1000;
198 	scheme = damon_lru_sort_new_hot_scheme(hot_thres);
199 	if (!scheme)
200 		return -ENOMEM;
201 	damon_set_schemes(ctx, &scheme, 1);
202 
203 	cold_thres = cold_min_age / damon_lru_sort_mon_attrs.aggr_interval;
204 	scheme = damon_lru_sort_new_cold_scheme(cold_thres);
205 	if (!scheme)
206 		return -ENOMEM;
207 	damon_add_scheme(ctx, scheme);
208 
209 	return damon_set_region_biggest_system_ram_default(target,
210 					&monitor_region_start,
211 					&monitor_region_end);
212 }
213 
214 static int damon_lru_sort_turn(bool on)
215 {
216 	int err;
217 
218 	if (!on) {
219 		err = damon_stop(&ctx, 1);
220 		if (!err)
221 			kdamond_pid = -1;
222 		return err;
223 	}
224 
225 	err = damon_lru_sort_apply_parameters();
226 	if (err)
227 		return err;
228 
229 	err = damon_start(&ctx, 1, true);
230 	if (err)
231 		return err;
232 	kdamond_pid = ctx->kdamond->pid;
233 	return 0;
234 }
235 
236 static int damon_lru_sort_enabled_store(const char *val,
237 		const struct kernel_param *kp)
238 {
239 	bool is_enabled = enabled;
240 	bool enable;
241 	int err;
242 
243 	err = kstrtobool(val, &enable);
244 	if (err)
245 		return err;
246 
247 	if (is_enabled == enable)
248 		return 0;
249 
250 	/* Called before init function.  The function will handle this. */
251 	if (!ctx)
252 		goto set_param_out;
253 
254 	err = damon_lru_sort_turn(enable);
255 	if (err)
256 		return err;
257 
258 set_param_out:
259 	enabled = enable;
260 	return err;
261 }
262 
263 static const struct kernel_param_ops enabled_param_ops = {
264 	.set = damon_lru_sort_enabled_store,
265 	.get = param_get_bool,
266 };
267 
268 module_param_cb(enabled, &enabled_param_ops, &enabled, 0600);
269 MODULE_PARM_DESC(enabled,
270 	"Enable or disable DAMON_LRU_SORT (default: disabled)");
271 
272 static int damon_lru_sort_handle_commit_inputs(void)
273 {
274 	int err;
275 
276 	if (!commit_inputs)
277 		return 0;
278 
279 	err = damon_lru_sort_apply_parameters();
280 	commit_inputs = false;
281 	return err;
282 }
283 
284 static int damon_lru_sort_after_aggregation(struct damon_ctx *c)
285 {
286 	struct damos *s;
287 
288 	/* update the stats parameter */
289 	damon_for_each_scheme(s, c) {
290 		if (s->action == DAMOS_LRU_PRIO)
291 			damon_lru_sort_hot_stat = s->stat;
292 		else if (s->action == DAMOS_LRU_DEPRIO)
293 			damon_lru_sort_cold_stat = s->stat;
294 	}
295 
296 	return damon_lru_sort_handle_commit_inputs();
297 }
298 
299 static int damon_lru_sort_after_wmarks_check(struct damon_ctx *c)
300 {
301 	return damon_lru_sort_handle_commit_inputs();
302 }
303 
304 static int __init damon_lru_sort_init(void)
305 {
306 	int err = damon_modules_new_paddr_ctx_target(&ctx, &target);
307 
308 	if (err)
309 		return err;
310 
311 	ctx->callback.after_wmarks_check = damon_lru_sort_after_wmarks_check;
312 	ctx->callback.after_aggregation = damon_lru_sort_after_aggregation;
313 
314 	/* 'enabled' has set before this function, probably via command line */
315 	if (enabled)
316 		err = damon_lru_sort_turn(true);
317 
318 	return err;
319 }
320 
321 module_init(damon_lru_sort_init);
322