1# 2# Library configuration 3# 4 5config BINARY_PRINTF 6 def_bool n 7 8menu "Library routines" 9 10config RAID6_PQ 11 tristate 12 13config BITREVERSE 14 tristate 15 16config HAVE_ARCH_BITREVERSE 17 bool 18 default n 19 depends on BITREVERSE 20 help 21 This option enables the use of hardware bit-reversal instructions on 22 architectures which support such operations. 23 24config RATIONAL 25 bool 26 27config GENERIC_STRNCPY_FROM_USER 28 bool 29 30config GENERIC_STRNLEN_USER 31 bool 32 33config GENERIC_NET_UTILS 34 bool 35 36config GENERIC_FIND_FIRST_BIT 37 bool 38 39config NO_GENERIC_PCI_IOPORT_MAP 40 bool 41 42config GENERIC_PCI_IOMAP 43 bool 44 45config GENERIC_IOMAP 46 bool 47 select GENERIC_PCI_IOMAP 48 49config GENERIC_IO 50 bool 51 default n 52 53config STMP_DEVICE 54 bool 55 56config ARCH_USE_CMPXCHG_LOCKREF 57 bool 58 59config ARCH_HAS_FAST_MULTIPLIER 60 bool 61 62config CRC_CCITT 63 tristate "CRC-CCITT functions" 64 help 65 This option is provided for the case where no in-kernel-tree 66 modules require CRC-CCITT functions, but a module built outside 67 the kernel tree does. Such modules that use library CRC-CCITT 68 functions require M here. 69 70config CRC16 71 tristate "CRC16 functions" 72 help 73 This option is provided for the case where no in-kernel-tree 74 modules require CRC16 functions, but a module built outside 75 the kernel tree does. Such modules that use library CRC16 76 functions require M here. 77 78config CRC_T10DIF 79 tristate "CRC calculation for the T10 Data Integrity Field" 80 select CRYPTO 81 select CRYPTO_CRCT10DIF 82 help 83 This option is only needed if a module that's not in the 84 kernel tree needs to calculate CRC checks for use with the 85 SCSI data integrity subsystem. 86 87config CRC_ITU_T 88 tristate "CRC ITU-T V.41 functions" 89 help 90 This option is provided for the case where no in-kernel-tree 91 modules require CRC ITU-T V.41 functions, but a module built outside 92 the kernel tree does. Such modules that use library CRC ITU-T V.41 93 functions require M here. 94 95config CRC32 96 tristate "CRC32/CRC32c functions" 97 default y 98 select BITREVERSE 99 help 100 This option is provided for the case where no in-kernel-tree 101 modules require CRC32/CRC32c functions, but a module built outside 102 the kernel tree does. Such modules that use library CRC32/CRC32c 103 functions require M here. 104 105config CRC32_SELFTEST 106 bool "CRC32 perform self test on init" 107 default n 108 depends on CRC32 109 help 110 This option enables the CRC32 library functions to perform a 111 self test on initialization. The self test computes crc32_le 112 and crc32_be over byte strings with random alignment and length 113 and computes the total elapsed time and number of bytes processed. 114 115choice 116 prompt "CRC32 implementation" 117 depends on CRC32 118 default CRC32_SLICEBY8 119 help 120 This option allows a kernel builder to override the default choice 121 of CRC32 algorithm. Choose the default ("slice by 8") unless you 122 know that you need one of the others. 123 124config CRC32_SLICEBY8 125 bool "Slice by 8 bytes" 126 help 127 Calculate checksum 8 bytes at a time with a clever slicing algorithm. 128 This is the fastest algorithm, but comes with a 8KiB lookup table. 129 Most modern processors have enough cache to hold this table without 130 thrashing the cache. 131 132 This is the default implementation choice. Choose this one unless 133 you have a good reason not to. 134 135config CRC32_SLICEBY4 136 bool "Slice by 4 bytes" 137 help 138 Calculate checksum 4 bytes at a time with a clever slicing algorithm. 139 This is a bit slower than slice by 8, but has a smaller 4KiB lookup 140 table. 141 142 Only choose this option if you know what you are doing. 143 144config CRC32_SARWATE 145 bool "Sarwate's Algorithm (one byte at a time)" 146 help 147 Calculate checksum a byte at a time using Sarwate's algorithm. This 148 is not particularly fast, but has a small 256 byte lookup table. 149 150 Only choose this option if you know what you are doing. 151 152config CRC32_BIT 153 bool "Classic Algorithm (one bit at a time)" 154 help 155 Calculate checksum one bit at a time. This is VERY slow, but has 156 no lookup table. This is provided as a debugging option. 157 158 Only choose this option if you are debugging crc32. 159 160endchoice 161 162config CRC7 163 tristate "CRC7 functions" 164 help 165 This option is provided for the case where no in-kernel-tree 166 modules require CRC7 functions, but a module built outside 167 the kernel tree does. Such modules that use library CRC7 168 functions require M here. 169 170config LIBCRC32C 171 tristate "CRC32c (Castagnoli, et al) Cyclic Redundancy-Check" 172 select CRYPTO 173 select CRYPTO_CRC32C 174 help 175 This option is provided for the case where no in-kernel-tree 176 modules require CRC32c functions, but a module built outside the 177 kernel tree does. Such modules that use library CRC32c functions 178 require M here. See Castagnoli93. 179 Module will be libcrc32c. 180 181config CRC8 182 tristate "CRC8 function" 183 help 184 This option provides CRC8 function. Drivers may select this 185 when they need to do cyclic redundancy check according CRC8 186 algorithm. Module will be called crc8. 187 188config AUDIT_GENERIC 189 bool 190 depends on AUDIT && !AUDIT_ARCH 191 default y 192 193config AUDIT_ARCH_COMPAT_GENERIC 194 bool 195 default n 196 197config AUDIT_COMPAT_GENERIC 198 bool 199 depends on AUDIT_GENERIC && AUDIT_ARCH_COMPAT_GENERIC && COMPAT 200 default y 201 202config RANDOM32_SELFTEST 203 bool "PRNG perform self test on init" 204 default n 205 help 206 This option enables the 32 bit PRNG library functions to perform a 207 self test on initialization. 208 209# 210# compression support is select'ed if needed 211# 212config 842_COMPRESS 213 select CRC32 214 tristate 215 216config 842_DECOMPRESS 217 select CRC32 218 tristate 219 220config ZLIB_INFLATE 221 tristate 222 223config ZLIB_DEFLATE 224 tristate 225 select BITREVERSE 226 227config LZO_COMPRESS 228 tristate 229 230config LZO_DECOMPRESS 231 tristate 232 233config LZ4_COMPRESS 234 tristate 235 236config LZ4HC_COMPRESS 237 tristate 238 239config LZ4_DECOMPRESS 240 tristate 241 242source "lib/xz/Kconfig" 243 244# 245# These all provide a common interface (hence the apparent duplication with 246# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) 247# 248config DECOMPRESS_GZIP 249 select ZLIB_INFLATE 250 tristate 251 252config DECOMPRESS_BZIP2 253 tristate 254 255config DECOMPRESS_LZMA 256 tristate 257 258config DECOMPRESS_XZ 259 select XZ_DEC 260 tristate 261 262config DECOMPRESS_LZO 263 select LZO_DECOMPRESS 264 tristate 265 266config DECOMPRESS_LZ4 267 select LZ4_DECOMPRESS 268 tristate 269 270# 271# Generic allocator support is selected if needed 272# 273config GENERIC_ALLOCATOR 274 bool 275 276# 277# reed solomon support is select'ed if needed 278# 279config REED_SOLOMON 280 tristate 281 282config REED_SOLOMON_ENC8 283 bool 284 285config REED_SOLOMON_DEC8 286 bool 287 288config REED_SOLOMON_ENC16 289 bool 290 291config REED_SOLOMON_DEC16 292 bool 293 294# 295# BCH support is selected if needed 296# 297config BCH 298 tristate 299 300config BCH_CONST_PARAMS 301 bool 302 help 303 Drivers may select this option to force specific constant 304 values for parameters 'm' (Galois field order) and 't' 305 (error correction capability). Those specific values must 306 be set by declaring default values for symbols BCH_CONST_M 307 and BCH_CONST_T. 308 Doing so will enable extra compiler optimizations, 309 improving encoding and decoding performance up to 2x for 310 usual (m,t) values (typically such that m*t < 200). 311 When this option is selected, the BCH library supports 312 only a single (m,t) configuration. This is mainly useful 313 for NAND flash board drivers requiring known, fixed BCH 314 parameters. 315 316config BCH_CONST_M 317 int 318 range 5 15 319 help 320 Constant value for Galois field order 'm'. If 'k' is the 321 number of data bits to protect, 'm' should be chosen such 322 that (k + m*t) <= 2**m - 1. 323 Drivers should declare a default value for this symbol if 324 they select option BCH_CONST_PARAMS. 325 326config BCH_CONST_T 327 int 328 help 329 Constant value for error correction capability in bits 't'. 330 Drivers should declare a default value for this symbol if 331 they select option BCH_CONST_PARAMS. 332 333# 334# Textsearch support is select'ed if needed 335# 336config TEXTSEARCH 337 bool 338 339config TEXTSEARCH_KMP 340 tristate 341 342config TEXTSEARCH_BM 343 tristate 344 345config TEXTSEARCH_FSM 346 tristate 347 348config BTREE 349 bool 350 351config INTERVAL_TREE 352 bool 353 help 354 Simple, embeddable, interval-tree. Can find the start of an 355 overlapping range in log(n) time and then iterate over all 356 overlapping nodes. The algorithm is implemented as an 357 augmented rbtree. 358 359 See: 360 361 Documentation/rbtree.txt 362 363 for more information. 364 365config ASSOCIATIVE_ARRAY 366 bool 367 help 368 Generic associative array. Can be searched and iterated over whilst 369 it is being modified. It is also reasonably quick to search and 370 modify. The algorithms are non-recursive, and the trees are highly 371 capacious. 372 373 See: 374 375 Documentation/assoc_array.txt 376 377 for more information. 378 379config HAS_IOMEM 380 bool 381 depends on !NO_IOMEM 382 select GENERIC_IO 383 default y 384 385config HAS_IOPORT_MAP 386 bool 387 depends on HAS_IOMEM && !NO_IOPORT_MAP 388 default y 389 390config HAS_DMA 391 bool 392 depends on !NO_DMA 393 default y 394 395config CHECK_SIGNATURE 396 bool 397 398config CPUMASK_OFFSTACK 399 bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS 400 help 401 Use dynamic allocation for cpumask_var_t, instead of putting 402 them on the stack. This is a bit more expensive, but avoids 403 stack overflow. 404 405config CPU_RMAP 406 bool 407 depends on SMP 408 409config DQL 410 bool 411 412config GLOB 413 bool 414# This actually supports modular compilation, but the module overhead 415# is ridiculous for the amount of code involved. Until an out-of-tree 416# driver asks for it, we'll just link it directly it into the kernel 417# when required. Since we're ignoring out-of-tree users, there's also 418# no need bother prompting for a manual decision: 419# prompt "glob_match() function" 420 help 421 This option provides a glob_match function for performing 422 simple text pattern matching. It originated in the ATA code 423 to blacklist particular drive models, but other device drivers 424 may need similar functionality. 425 426 All drivers in the Linux kernel tree that require this function 427 should automatically select this option. Say N unless you 428 are compiling an out-of tree driver which tells you that it 429 depends on this. 430 431config GLOB_SELFTEST 432 bool "glob self-test on init" 433 default n 434 depends on GLOB 435 help 436 This option enables a simple self-test of the glob_match 437 function on startup. It is primarily useful for people 438 working on the code to ensure they haven't introduced any 439 regressions. 440 441 It only adds a little bit of code and slows kernel boot (or 442 module load) by a small amount, so you're welcome to play with 443 it, but you probably don't need it. 444 445# 446# Netlink attribute parsing support is select'ed if needed 447# 448config NLATTR 449 bool 450 451# 452# Generic 64-bit atomic support is selected if needed 453# 454config GENERIC_ATOMIC64 455 bool 456 457config ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE 458 def_bool y if GENERIC_ATOMIC64 459 460config LRU_CACHE 461 tristate 462 463config CLZ_TAB 464 bool 465 466config CORDIC 467 tristate "CORDIC algorithm" 468 help 469 This option provides an implementation of the CORDIC algorithm; 470 calculations are in fixed point. Module will be called cordic. 471 472config DDR 473 bool "JEDEC DDR data" 474 help 475 Data from JEDEC specs for DDR SDRAM memories, 476 particularly the AC timing parameters and addressing 477 information. This data is useful for drivers handling 478 DDR SDRAM controllers. 479 480config IRQ_POLL 481 bool "IRQ polling library" 482 help 483 Helper library to poll interrupt mitigation using polling. 484 485config MPILIB 486 tristate 487 select CLZ_TAB 488 help 489 Multiprecision maths library from GnuPG. 490 It is used to implement RSA digital signature verification, 491 which is used by IMA/EVM digital signature extension. 492 493config SIGNATURE 494 tristate 495 depends on KEYS 496 select CRYPTO 497 select CRYPTO_SHA1 498 select MPILIB 499 help 500 Digital signature verification. Currently only RSA is supported. 501 Implementation is done using GnuPG MPI library 502 503# 504# libfdt files, only selected if needed. 505# 506config LIBFDT 507 bool 508 509config OID_REGISTRY 510 tristate 511 help 512 Enable fast lookup object identifier registry. 513 514config UCS2_STRING 515 tristate 516 517source "lib/fonts/Kconfig" 518 519config SG_SPLIT 520 def_bool n 521 help 522 Provides a helper to split scatterlists into chunks, each chunk being 523 a scatterlist. This should be selected by a driver or an API which 524 whishes to split a scatterlist amongst multiple DMA channels. 525 526# 527# sg chaining option 528# 529 530config ARCH_HAS_SG_CHAIN 531 def_bool n 532 533config ARCH_HAS_PMEM_API 534 bool 535 536config ARCH_HAS_MMIO_FLUSH 537 bool 538 539endmenu 540