1# 2# Architectures that offer an FUNCTION_TRACER implementation should 3# select HAVE_FUNCTION_TRACER: 4# 5 6config USER_STACKTRACE_SUPPORT 7 bool 8 9config NOP_TRACER 10 bool 11 12config HAVE_FTRACE_NMI_ENTER 13 bool 14 help 15 See Documentation/trace/ftrace-design.txt 16 17config HAVE_FUNCTION_TRACER 18 bool 19 help 20 See Documentation/trace/ftrace-design.txt 21 22config HAVE_FUNCTION_GRAPH_TRACER 23 bool 24 help 25 See Documentation/trace/ftrace-design.txt 26 27config HAVE_FUNCTION_GRAPH_FP_TEST 28 bool 29 help 30 See Documentation/trace/ftrace-design.txt 31 32config HAVE_FUNCTION_TRACE_MCOUNT_TEST 33 bool 34 help 35 See Documentation/trace/ftrace-design.txt 36 37config HAVE_DYNAMIC_FTRACE 38 bool 39 help 40 See Documentation/trace/ftrace-design.txt 41 42config HAVE_FTRACE_MCOUNT_RECORD 43 bool 44 help 45 See Documentation/trace/ftrace-design.txt 46 47config HAVE_SYSCALL_TRACEPOINTS 48 bool 49 help 50 See Documentation/trace/ftrace-design.txt 51 52config TRACER_MAX_TRACE 53 bool 54 55config RING_BUFFER 56 bool 57 58config FTRACE_NMI_ENTER 59 bool 60 depends on HAVE_FTRACE_NMI_ENTER 61 default y 62 63config EVENT_TRACING 64 select CONTEXT_SWITCH_TRACER 65 bool 66 67config CONTEXT_SWITCH_TRACER 68 bool 69 70config RING_BUFFER_ALLOW_SWAP 71 bool 72 help 73 Allow the use of ring_buffer_swap_cpu. 74 Adds a very slight overhead to tracing when enabled. 75 76# All tracer options should select GENERIC_TRACER. For those options that are 77# enabled by all tracers (context switch and event tracer) they select TRACING. 78# This allows those options to appear when no other tracer is selected. But the 79# options do not appear when something else selects it. We need the two options 80# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the 81# hiding of the automatic options. 82 83config TRACING 84 bool 85 select DEBUG_FS 86 select RING_BUFFER 87 select STACKTRACE if STACKTRACE_SUPPORT 88 select TRACEPOINTS 89 select NOP_TRACER 90 select BINARY_PRINTF 91 select EVENT_TRACING 92 93config GENERIC_TRACER 94 bool 95 select TRACING 96 97# 98# Minimum requirements an architecture has to meet for us to 99# be able to offer generic tracing facilities: 100# 101config TRACING_SUPPORT 102 bool 103 # PPC32 has no irqflags tracing support, but it can use most of the 104 # tracers anyway, they were tested to build and work. Note that new 105 # exceptions to this list aren't welcomed, better implement the 106 # irqflags tracing for your architecture. 107 depends on TRACE_IRQFLAGS_SUPPORT || PPC32 108 depends on STACKTRACE_SUPPORT 109 default y 110 111if TRACING_SUPPORT 112 113menuconfig FTRACE 114 bool "Tracers" 115 default y if DEBUG_KERNEL 116 help 117 Enable the kernel tracing infrastructure. 118 119if FTRACE 120 121config FUNCTION_TRACER 122 bool "Kernel Function Tracer" 123 depends on HAVE_FUNCTION_TRACER 124 select FRAME_POINTER 125 select KALLSYMS 126 select GENERIC_TRACER 127 select CONTEXT_SWITCH_TRACER 128 help 129 Enable the kernel to trace every kernel function. This is done 130 by using a compiler feature to insert a small, 5-byte No-Operation 131 instruction at the beginning of every kernel function, which NOP 132 sequence is then dynamically patched into a tracer call when 133 tracing is enabled by the administrator. If it's runtime disabled 134 (the bootup default), then the overhead of the instructions is very 135 small and not measurable even in micro-benchmarks. 136 137config FUNCTION_GRAPH_TRACER 138 bool "Kernel Function Graph Tracer" 139 depends on HAVE_FUNCTION_GRAPH_TRACER 140 depends on FUNCTION_TRACER 141 depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE 142 default y 143 help 144 Enable the kernel to trace a function at both its return 145 and its entry. 146 Its first purpose is to trace the duration of functions and 147 draw a call graph for each thread with some information like 148 the return value. This is done by setting the current return 149 address on the current task structure into a stack of calls. 150 151 152config IRQSOFF_TRACER 153 bool "Interrupts-off Latency Tracer" 154 default n 155 depends on TRACE_IRQFLAGS_SUPPORT 156 depends on GENERIC_TIME 157 select TRACE_IRQFLAGS 158 select GENERIC_TRACER 159 select TRACER_MAX_TRACE 160 select RING_BUFFER_ALLOW_SWAP 161 help 162 This option measures the time spent in irqs-off critical 163 sections, with microsecond accuracy. 164 165 The default measurement method is a maximum search, which is 166 disabled by default and can be runtime (re-)started 167 via: 168 169 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency 170 171 (Note that kernel size and overhead increase with this option 172 enabled. This option and the preempt-off timing option can be 173 used together or separately.) 174 175config PREEMPT_TRACER 176 bool "Preemption-off Latency Tracer" 177 default n 178 depends on GENERIC_TIME 179 depends on PREEMPT 180 select GENERIC_TRACER 181 select TRACER_MAX_TRACE 182 select RING_BUFFER_ALLOW_SWAP 183 help 184 This option measures the time spent in preemption-off critical 185 sections, with microsecond accuracy. 186 187 The default measurement method is a maximum search, which is 188 disabled by default and can be runtime (re-)started 189 via: 190 191 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency 192 193 (Note that kernel size and overhead increase with this option 194 enabled. This option and the irqs-off timing option can be 195 used together or separately.) 196 197config SYSPROF_TRACER 198 bool "Sysprof Tracer" 199 depends on X86 200 select GENERIC_TRACER 201 select CONTEXT_SWITCH_TRACER 202 help 203 This tracer provides the trace needed by the 'Sysprof' userspace 204 tool. 205 206config SCHED_TRACER 207 bool "Scheduling Latency Tracer" 208 select GENERIC_TRACER 209 select CONTEXT_SWITCH_TRACER 210 select TRACER_MAX_TRACE 211 help 212 This tracer tracks the latency of the highest priority task 213 to be scheduled in, starting from the point it has woken up. 214 215config ENABLE_DEFAULT_TRACERS 216 bool "Trace process context switches and events" 217 depends on !GENERIC_TRACER 218 select TRACING 219 help 220 This tracer hooks to various trace points in the kernel, 221 allowing the user to pick and choose which trace point they 222 want to trace. It also includes the sched_switch tracer plugin. 223 224config FTRACE_SYSCALLS 225 bool "Trace syscalls" 226 depends on HAVE_SYSCALL_TRACEPOINTS 227 select GENERIC_TRACER 228 select KALLSYMS 229 help 230 Basic tracer to catch the syscall entry and exit events. 231 232config TRACE_BRANCH_PROFILING 233 bool 234 select GENERIC_TRACER 235 236choice 237 prompt "Branch Profiling" 238 default BRANCH_PROFILE_NONE 239 help 240 The branch profiling is a software profiler. It will add hooks 241 into the C conditionals to test which path a branch takes. 242 243 The likely/unlikely profiler only looks at the conditions that 244 are annotated with a likely or unlikely macro. 245 246 The "all branch" profiler will profile every if-statement in the 247 kernel. This profiler will also enable the likely/unlikely 248 profiler. 249 250 Either of the above profilers adds a bit of overhead to the system. 251 If unsure, choose "No branch profiling". 252 253config BRANCH_PROFILE_NONE 254 bool "No branch profiling" 255 help 256 No branch profiling. Branch profiling adds a bit of overhead. 257 Only enable it if you want to analyse the branching behavior. 258 Otherwise keep it disabled. 259 260config PROFILE_ANNOTATED_BRANCHES 261 bool "Trace likely/unlikely profiler" 262 select TRACE_BRANCH_PROFILING 263 help 264 This tracer profiles all the the likely and unlikely macros 265 in the kernel. It will display the results in: 266 267 /sys/kernel/debug/tracing/profile_annotated_branch 268 269 Note: this will add a significant overhead; only turn this 270 on if you need to profile the system's use of these macros. 271 272config PROFILE_ALL_BRANCHES 273 bool "Profile all if conditionals" 274 select TRACE_BRANCH_PROFILING 275 help 276 This tracer profiles all branch conditions. Every if () 277 taken in the kernel is recorded whether it hit or miss. 278 The results will be displayed in: 279 280 /sys/kernel/debug/tracing/profile_branch 281 282 This option also enables the likely/unlikely profiler. 283 284 This configuration, when enabled, will impose a great overhead 285 on the system. This should only be enabled when the system 286 is to be analyzed in much detail. 287endchoice 288 289config TRACING_BRANCHES 290 bool 291 help 292 Selected by tracers that will trace the likely and unlikely 293 conditions. This prevents the tracers themselves from being 294 profiled. Profiling the tracing infrastructure can only happen 295 when the likelys and unlikelys are not being traced. 296 297config BRANCH_TRACER 298 bool "Trace likely/unlikely instances" 299 depends on TRACE_BRANCH_PROFILING 300 select TRACING_BRANCHES 301 help 302 This traces the events of likely and unlikely condition 303 calls in the kernel. The difference between this and the 304 "Trace likely/unlikely profiler" is that this is not a 305 histogram of the callers, but actually places the calling 306 events into a running trace buffer to see when and where the 307 events happened, as well as their results. 308 309 Say N if unsure. 310 311config KSYM_TRACER 312 bool "Trace read and write access on kernel memory locations" 313 depends on HAVE_HW_BREAKPOINT 314 select TRACING 315 help 316 This tracer helps find read and write operations on any given kernel 317 symbol i.e. /proc/kallsyms. 318 319config PROFILE_KSYM_TRACER 320 bool "Profile all kernel memory accesses on 'watched' variables" 321 depends on KSYM_TRACER 322 help 323 This tracer profiles kernel accesses on variables watched through the 324 ksym tracer ftrace plugin. Depending upon the hardware, all read 325 and write operations on kernel variables can be monitored for 326 accesses. 327 328 The results will be displayed in: 329 /debugfs/tracing/profile_ksym 330 331 Say N if unsure. 332 333config STACK_TRACER 334 bool "Trace max stack" 335 depends on HAVE_FUNCTION_TRACER 336 select FUNCTION_TRACER 337 select STACKTRACE 338 select KALLSYMS 339 help 340 This special tracer records the maximum stack footprint of the 341 kernel and displays it in /sys/kernel/debug/tracing/stack_trace. 342 343 This tracer works by hooking into every function call that the 344 kernel executes, and keeping a maximum stack depth value and 345 stack-trace saved. If this is configured with DYNAMIC_FTRACE 346 then it will not have any overhead while the stack tracer 347 is disabled. 348 349 To enable the stack tracer on bootup, pass in 'stacktrace' 350 on the kernel command line. 351 352 The stack tracer can also be enabled or disabled via the 353 sysctl kernel.stack_tracer_enabled 354 355 Say N if unsure. 356 357config WORKQUEUE_TRACER 358 bool "Trace workqueues" 359 select GENERIC_TRACER 360 help 361 The workqueue tracer provides some statistical information 362 about each cpu workqueue thread such as the number of the 363 works inserted and executed since their creation. It can help 364 to evaluate the amount of work each of them has to perform. 365 For example it can help a developer to decide whether he should 366 choose a per-cpu workqueue instead of a singlethreaded one. 367 368config BLK_DEV_IO_TRACE 369 bool "Support for tracing block IO actions" 370 depends on SYSFS 371 depends on BLOCK 372 select RELAY 373 select DEBUG_FS 374 select TRACEPOINTS 375 select GENERIC_TRACER 376 select STACKTRACE 377 help 378 Say Y here if you want to be able to trace the block layer actions 379 on a given queue. Tracing allows you to see any traffic happening 380 on a block device queue. For more information (and the userspace 381 support tools needed), fetch the blktrace tools from: 382 383 git://git.kernel.dk/blktrace.git 384 385 Tracing also is possible using the ftrace interface, e.g.: 386 387 echo 1 > /sys/block/sda/sda1/trace/enable 388 echo blk > /sys/kernel/debug/tracing/current_tracer 389 cat /sys/kernel/debug/tracing/trace_pipe 390 391 If unsure, say N. 392 393config KPROBE_EVENT 394 depends on KPROBES 395 depends on HAVE_REGS_AND_STACK_ACCESS_API 396 bool "Enable kprobes-based dynamic events" 397 select TRACING 398 default y 399 help 400 This allows the user to add tracing events (similar to tracepoints) 401 on the fly via the ftrace interface. See 402 Documentation/trace/kprobetrace.txt for more details. 403 404 Those events can be inserted wherever kprobes can probe, and record 405 various register and memory values. 406 407 This option is also required by perf-probe subcommand of perf tools. 408 If you want to use perf tools, this option is strongly recommended. 409 410config DYNAMIC_FTRACE 411 bool "enable/disable ftrace tracepoints dynamically" 412 depends on FUNCTION_TRACER 413 depends on HAVE_DYNAMIC_FTRACE 414 default y 415 help 416 This option will modify all the calls to ftrace dynamically 417 (will patch them out of the binary image and replace them 418 with a No-Op instruction) as they are called. A table is 419 created to dynamically enable them again. 420 421 This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but 422 otherwise has native performance as long as no tracing is active. 423 424 The changes to the code are done by a kernel thread that 425 wakes up once a second and checks to see if any ftrace calls 426 were made. If so, it runs stop_machine (stops all CPUS) 427 and modifies the code to jump over the call to ftrace. 428 429config FUNCTION_PROFILER 430 bool "Kernel function profiler" 431 depends on FUNCTION_TRACER 432 default n 433 help 434 This option enables the kernel function profiler. A file is created 435 in debugfs called function_profile_enabled which defaults to zero. 436 When a 1 is echoed into this file profiling begins, and when a 437 zero is entered, profiling stops. A "functions" file is created in 438 the trace_stats directory; this file shows the list of functions that 439 have been hit and their counters. 440 441 If in doubt, say N. 442 443config FTRACE_MCOUNT_RECORD 444 def_bool y 445 depends on DYNAMIC_FTRACE 446 depends on HAVE_FTRACE_MCOUNT_RECORD 447 448config FTRACE_SELFTEST 449 bool 450 451config FTRACE_STARTUP_TEST 452 bool "Perform a startup test on ftrace" 453 depends on GENERIC_TRACER 454 select FTRACE_SELFTEST 455 help 456 This option performs a series of startup tests on ftrace. On bootup 457 a series of tests are made to verify that the tracer is 458 functioning properly. It will do tests on all the configured 459 tracers of ftrace. 460 461config EVENT_TRACE_TEST_SYSCALLS 462 bool "Run selftest on syscall events" 463 depends on FTRACE_STARTUP_TEST 464 help 465 This option will also enable testing every syscall event. 466 It only enables the event and disables it and runs various loads 467 with the event enabled. This adds a bit more time for kernel boot 468 up since it runs this on every system call defined. 469 470 TBD - enable a way to actually call the syscalls as we test their 471 events 472 473config MMIOTRACE 474 bool "Memory mapped IO tracing" 475 depends on HAVE_MMIOTRACE_SUPPORT && PCI 476 select GENERIC_TRACER 477 help 478 Mmiotrace traces Memory Mapped I/O access and is meant for 479 debugging and reverse engineering. It is called from the ioremap 480 implementation and works via page faults. Tracing is disabled by 481 default and can be enabled at run-time. 482 483 See Documentation/trace/mmiotrace.txt. 484 If you are not helping to develop drivers, say N. 485 486config MMIOTRACE_TEST 487 tristate "Test module for mmiotrace" 488 depends on MMIOTRACE && m 489 help 490 This is a dumb module for testing mmiotrace. It is very dangerous 491 as it will write garbage to IO memory starting at a given address. 492 However, it should be safe to use on e.g. unused portion of VRAM. 493 494 Say N, unless you absolutely know what you are doing. 495 496config RING_BUFFER_BENCHMARK 497 tristate "Ring buffer benchmark stress tester" 498 depends on RING_BUFFER 499 help 500 This option creates a test to stress the ring buffer and benchmark it. 501 It creates its own ring buffer such that it will not interfere with 502 any other users of the ring buffer (such as ftrace). It then creates 503 a producer and consumer that will run for 10 seconds and sleep for 504 10 seconds. Each interval it will print out the number of events 505 it recorded and give a rough estimate of how long each iteration took. 506 507 It does not disable interrupts or raise its priority, so it may be 508 affected by processes that are running. 509 510 If unsure, say N. 511 512endif # FTRACE 513 514endif # TRACING_SUPPORT 515 516