xref: /openbmc/linux/kernel/rcu/update.c (revision 4c5a116a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Read-Copy Update mechanism for mutual exclusion
4  *
5  * Copyright IBM Corporation, 2001
6  *
7  * Authors: Dipankar Sarma <dipankar@in.ibm.com>
8  *	    Manfred Spraul <manfred@colorfullife.com>
9  *
10  * Based on the original work by Paul McKenney <paulmck@linux.ibm.com>
11  * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
12  * Papers:
13  * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
14  * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
15  *
16  * For detailed explanation of Read-Copy Update mechanism see -
17  *		http://lse.sourceforge.net/locking/rcupdate.html
18  *
19  */
20 #include <linux/types.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/spinlock.h>
24 #include <linux/smp.h>
25 #include <linux/interrupt.h>
26 #include <linux/sched/signal.h>
27 #include <linux/sched/debug.h>
28 #include <linux/atomic.h>
29 #include <linux/bitops.h>
30 #include <linux/percpu.h>
31 #include <linux/notifier.h>
32 #include <linux/cpu.h>
33 #include <linux/mutex.h>
34 #include <linux/export.h>
35 #include <linux/hardirq.h>
36 #include <linux/delay.h>
37 #include <linux/moduleparam.h>
38 #include <linux/kthread.h>
39 #include <linux/tick.h>
40 #include <linux/rcupdate_wait.h>
41 #include <linux/sched/isolation.h>
42 #include <linux/kprobes.h>
43 #include <linux/slab.h>
44 #include <linux/irq_work.h>
45 #include <linux/rcupdate_trace.h>
46 
47 #define CREATE_TRACE_POINTS
48 
49 #include "rcu.h"
50 
51 #ifdef MODULE_PARAM_PREFIX
52 #undef MODULE_PARAM_PREFIX
53 #endif
54 #define MODULE_PARAM_PREFIX "rcupdate."
55 
56 #ifndef data_race
57 #define data_race(expr)							\
58 	({								\
59 		expr;							\
60 	})
61 #endif
62 #ifndef ASSERT_EXCLUSIVE_WRITER
63 #define ASSERT_EXCLUSIVE_WRITER(var) do { } while (0)
64 #endif
65 #ifndef ASSERT_EXCLUSIVE_ACCESS
66 #define ASSERT_EXCLUSIVE_ACCESS(var) do { } while (0)
67 #endif
68 
69 #ifndef CONFIG_TINY_RCU
70 module_param(rcu_expedited, int, 0);
71 module_param(rcu_normal, int, 0);
72 static int rcu_normal_after_boot;
73 module_param(rcu_normal_after_boot, int, 0);
74 #endif /* #ifndef CONFIG_TINY_RCU */
75 
76 #ifdef CONFIG_DEBUG_LOCK_ALLOC
77 /**
78  * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
79  * @ret:	Best guess answer if lockdep cannot be relied on
80  *
81  * Returns true if lockdep must be ignored, in which case ``*ret`` contains
82  * the best guess described below.  Otherwise returns false, in which
83  * case ``*ret`` tells the caller nothing and the caller should instead
84  * consult lockdep.
85  *
86  * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an
87  * RCU-sched read-side critical section.  In absence of
88  * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
89  * critical section unless it can prove otherwise.  Note that disabling
90  * of preemption (including disabling irqs) counts as an RCU-sched
91  * read-side critical section.  This is useful for debug checks in functions
92  * that required that they be called within an RCU-sched read-side
93  * critical section.
94  *
95  * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
96  * and while lockdep is disabled.
97  *
98  * Note that if the CPU is in the idle loop from an RCU point of view (ie:
99  * that we are in the section between rcu_idle_enter() and rcu_idle_exit())
100  * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an
101  * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
102  * in such a section, considering these as in extended quiescent state,
103  * so such a CPU is effectively never in an RCU read-side critical section
104  * regardless of what RCU primitives it invokes.  This state of affairs is
105  * required --- we need to keep an RCU-free window in idle where the CPU may
106  * possibly enter into low power mode. This way we can notice an extended
107  * quiescent state to other CPUs that started a grace period. Otherwise
108  * we would delay any grace period as long as we run in the idle task.
109  *
110  * Similarly, we avoid claiming an RCU read lock held if the current
111  * CPU is offline.
112  */
113 static bool rcu_read_lock_held_common(bool *ret)
114 {
115 	if (!debug_lockdep_rcu_enabled()) {
116 		*ret = true;
117 		return true;
118 	}
119 	if (!rcu_is_watching()) {
120 		*ret = false;
121 		return true;
122 	}
123 	if (!rcu_lockdep_current_cpu_online()) {
124 		*ret = false;
125 		return true;
126 	}
127 	return false;
128 }
129 
130 int rcu_read_lock_sched_held(void)
131 {
132 	bool ret;
133 
134 	if (rcu_read_lock_held_common(&ret))
135 		return ret;
136 	return lock_is_held(&rcu_sched_lock_map) || !preemptible();
137 }
138 EXPORT_SYMBOL(rcu_read_lock_sched_held);
139 #endif
140 
141 #ifndef CONFIG_TINY_RCU
142 
143 /*
144  * Should expedited grace-period primitives always fall back to their
145  * non-expedited counterparts?  Intended for use within RCU.  Note
146  * that if the user specifies both rcu_expedited and rcu_normal, then
147  * rcu_normal wins.  (Except during the time period during boot from
148  * when the first task is spawned until the rcu_set_runtime_mode()
149  * core_initcall() is invoked, at which point everything is expedited.)
150  */
151 bool rcu_gp_is_normal(void)
152 {
153 	return READ_ONCE(rcu_normal) &&
154 	       rcu_scheduler_active != RCU_SCHEDULER_INIT;
155 }
156 EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
157 
158 static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
159 
160 /*
161  * Should normal grace-period primitives be expedited?  Intended for
162  * use within RCU.  Note that this function takes the rcu_expedited
163  * sysfs/boot variable and rcu_scheduler_active into account as well
164  * as the rcu_expedite_gp() nesting.  So looping on rcu_unexpedite_gp()
165  * until rcu_gp_is_expedited() returns false is a -really- bad idea.
166  */
167 bool rcu_gp_is_expedited(void)
168 {
169 	return rcu_expedited || atomic_read(&rcu_expedited_nesting);
170 }
171 EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);
172 
173 /**
174  * rcu_expedite_gp - Expedite future RCU grace periods
175  *
176  * After a call to this function, future calls to synchronize_rcu() and
177  * friends act as the corresponding synchronize_rcu_expedited() function
178  * had instead been called.
179  */
180 void rcu_expedite_gp(void)
181 {
182 	atomic_inc(&rcu_expedited_nesting);
183 }
184 EXPORT_SYMBOL_GPL(rcu_expedite_gp);
185 
186 /**
187  * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation
188  *
189  * Undo a prior call to rcu_expedite_gp().  If all prior calls to
190  * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(),
191  * and if the rcu_expedited sysfs/boot parameter is not set, then all
192  * subsequent calls to synchronize_rcu() and friends will return to
193  * their normal non-expedited behavior.
194  */
195 void rcu_unexpedite_gp(void)
196 {
197 	atomic_dec(&rcu_expedited_nesting);
198 }
199 EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
200 
201 static bool rcu_boot_ended __read_mostly;
202 
203 /*
204  * Inform RCU of the end of the in-kernel boot sequence.
205  */
206 void rcu_end_inkernel_boot(void)
207 {
208 	rcu_unexpedite_gp();
209 	if (rcu_normal_after_boot)
210 		WRITE_ONCE(rcu_normal, 1);
211 	rcu_boot_ended = true;
212 }
213 
214 /*
215  * Let rcutorture know when it is OK to turn it up to eleven.
216  */
217 bool rcu_inkernel_boot_has_ended(void)
218 {
219 	return rcu_boot_ended;
220 }
221 EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended);
222 
223 #endif /* #ifndef CONFIG_TINY_RCU */
224 
225 /*
226  * Test each non-SRCU synchronous grace-period wait API.  This is
227  * useful just after a change in mode for these primitives, and
228  * during early boot.
229  */
230 void rcu_test_sync_prims(void)
231 {
232 	if (!IS_ENABLED(CONFIG_PROVE_RCU))
233 		return;
234 	synchronize_rcu();
235 	synchronize_rcu_expedited();
236 }
237 
238 #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU)
239 
240 /*
241  * Switch to run-time mode once RCU has fully initialized.
242  */
243 static int __init rcu_set_runtime_mode(void)
244 {
245 	rcu_test_sync_prims();
246 	rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
247 	kfree_rcu_scheduler_running();
248 	rcu_test_sync_prims();
249 	return 0;
250 }
251 core_initcall(rcu_set_runtime_mode);
252 
253 #endif /* #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) */
254 
255 #ifdef CONFIG_DEBUG_LOCK_ALLOC
256 static struct lock_class_key rcu_lock_key;
257 struct lockdep_map rcu_lock_map = {
258 	.name = "rcu_read_lock",
259 	.key = &rcu_lock_key,
260 	.wait_type_outer = LD_WAIT_FREE,
261 	.wait_type_inner = LD_WAIT_CONFIG, /* XXX PREEMPT_RCU ? */
262 };
263 EXPORT_SYMBOL_GPL(rcu_lock_map);
264 
265 static struct lock_class_key rcu_bh_lock_key;
266 struct lockdep_map rcu_bh_lock_map = {
267 	.name = "rcu_read_lock_bh",
268 	.key = &rcu_bh_lock_key,
269 	.wait_type_outer = LD_WAIT_FREE,
270 	.wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_LOCK also makes BH preemptible */
271 };
272 EXPORT_SYMBOL_GPL(rcu_bh_lock_map);
273 
274 static struct lock_class_key rcu_sched_lock_key;
275 struct lockdep_map rcu_sched_lock_map = {
276 	.name = "rcu_read_lock_sched",
277 	.key = &rcu_sched_lock_key,
278 	.wait_type_outer = LD_WAIT_FREE,
279 	.wait_type_inner = LD_WAIT_SPIN,
280 };
281 EXPORT_SYMBOL_GPL(rcu_sched_lock_map);
282 
283 // Tell lockdep when RCU callbacks are being invoked.
284 static struct lock_class_key rcu_callback_key;
285 struct lockdep_map rcu_callback_map =
286 	STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key);
287 EXPORT_SYMBOL_GPL(rcu_callback_map);
288 
289 noinstr int notrace debug_lockdep_rcu_enabled(void)
290 {
291 	return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks &&
292 	       current->lockdep_recursion == 0;
293 }
294 EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
295 
296 /**
297  * rcu_read_lock_held() - might we be in RCU read-side critical section?
298  *
299  * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
300  * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
301  * this assumes we are in an RCU read-side critical section unless it can
302  * prove otherwise.  This is useful for debug checks in functions that
303  * require that they be called within an RCU read-side critical section.
304  *
305  * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
306  * and while lockdep is disabled.
307  *
308  * Note that rcu_read_lock() and the matching rcu_read_unlock() must
309  * occur in the same context, for example, it is illegal to invoke
310  * rcu_read_unlock() in process context if the matching rcu_read_lock()
311  * was invoked from within an irq handler.
312  *
313  * Note that rcu_read_lock() is disallowed if the CPU is either idle or
314  * offline from an RCU perspective, so check for those as well.
315  */
316 int rcu_read_lock_held(void)
317 {
318 	bool ret;
319 
320 	if (rcu_read_lock_held_common(&ret))
321 		return ret;
322 	return lock_is_held(&rcu_lock_map);
323 }
324 EXPORT_SYMBOL_GPL(rcu_read_lock_held);
325 
326 /**
327  * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
328  *
329  * Check for bottom half being disabled, which covers both the
330  * CONFIG_PROVE_RCU and not cases.  Note that if someone uses
331  * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
332  * will show the situation.  This is useful for debug checks in functions
333  * that require that they be called within an RCU read-side critical
334  * section.
335  *
336  * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
337  *
338  * Note that rcu_read_lock_bh() is disallowed if the CPU is either idle or
339  * offline from an RCU perspective, so check for those as well.
340  */
341 int rcu_read_lock_bh_held(void)
342 {
343 	bool ret;
344 
345 	if (rcu_read_lock_held_common(&ret))
346 		return ret;
347 	return in_softirq() || irqs_disabled();
348 }
349 EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
350 
351 int rcu_read_lock_any_held(void)
352 {
353 	bool ret;
354 
355 	if (rcu_read_lock_held_common(&ret))
356 		return ret;
357 	if (lock_is_held(&rcu_lock_map) ||
358 	    lock_is_held(&rcu_bh_lock_map) ||
359 	    lock_is_held(&rcu_sched_lock_map))
360 		return 1;
361 	return !preemptible();
362 }
363 EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
364 
365 #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
366 
367 /**
368  * wakeme_after_rcu() - Callback function to awaken a task after grace period
369  * @head: Pointer to rcu_head member within rcu_synchronize structure
370  *
371  * Awaken the corresponding task now that a grace period has elapsed.
372  */
373 void wakeme_after_rcu(struct rcu_head *head)
374 {
375 	struct rcu_synchronize *rcu;
376 
377 	rcu = container_of(head, struct rcu_synchronize, head);
378 	complete(&rcu->completion);
379 }
380 EXPORT_SYMBOL_GPL(wakeme_after_rcu);
381 
382 void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
383 		   struct rcu_synchronize *rs_array)
384 {
385 	int i;
386 	int j;
387 
388 	/* Initialize and register callbacks for each crcu_array element. */
389 	for (i = 0; i < n; i++) {
390 		if (checktiny &&
391 		    (crcu_array[i] == call_rcu)) {
392 			might_sleep();
393 			continue;
394 		}
395 		for (j = 0; j < i; j++)
396 			if (crcu_array[j] == crcu_array[i])
397 				break;
398 		if (j == i) {
399 			init_rcu_head_on_stack(&rs_array[i].head);
400 			init_completion(&rs_array[i].completion);
401 			(crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
402 		}
403 	}
404 
405 	/* Wait for all callbacks to be invoked. */
406 	for (i = 0; i < n; i++) {
407 		if (checktiny &&
408 		    (crcu_array[i] == call_rcu))
409 			continue;
410 		for (j = 0; j < i; j++)
411 			if (crcu_array[j] == crcu_array[i])
412 				break;
413 		if (j == i) {
414 			wait_for_completion(&rs_array[i].completion);
415 			destroy_rcu_head_on_stack(&rs_array[i].head);
416 		}
417 	}
418 }
419 EXPORT_SYMBOL_GPL(__wait_rcu_gp);
420 
421 #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
422 void init_rcu_head(struct rcu_head *head)
423 {
424 	debug_object_init(head, &rcuhead_debug_descr);
425 }
426 EXPORT_SYMBOL_GPL(init_rcu_head);
427 
428 void destroy_rcu_head(struct rcu_head *head)
429 {
430 	debug_object_free(head, &rcuhead_debug_descr);
431 }
432 EXPORT_SYMBOL_GPL(destroy_rcu_head);
433 
434 static bool rcuhead_is_static_object(void *addr)
435 {
436 	return true;
437 }
438 
439 /**
440  * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
441  * @head: pointer to rcu_head structure to be initialized
442  *
443  * This function informs debugobjects of a new rcu_head structure that
444  * has been allocated as an auto variable on the stack.  This function
445  * is not required for rcu_head structures that are statically defined or
446  * that are dynamically allocated on the heap.  This function has no
447  * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
448  */
449 void init_rcu_head_on_stack(struct rcu_head *head)
450 {
451 	debug_object_init_on_stack(head, &rcuhead_debug_descr);
452 }
453 EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);
454 
455 /**
456  * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
457  * @head: pointer to rcu_head structure to be initialized
458  *
459  * This function informs debugobjects that an on-stack rcu_head structure
460  * is about to go out of scope.  As with init_rcu_head_on_stack(), this
461  * function is not required for rcu_head structures that are statically
462  * defined or that are dynamically allocated on the heap.  Also as with
463  * init_rcu_head_on_stack(), this function has no effect for
464  * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
465  */
466 void destroy_rcu_head_on_stack(struct rcu_head *head)
467 {
468 	debug_object_free(head, &rcuhead_debug_descr);
469 }
470 EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);
471 
472 struct debug_obj_descr rcuhead_debug_descr = {
473 	.name = "rcu_head",
474 	.is_static_object = rcuhead_is_static_object,
475 };
476 EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
477 #endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
478 
479 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE)
480 void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
481 			       unsigned long secs,
482 			       unsigned long c_old, unsigned long c)
483 {
484 	trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
485 }
486 EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
487 #else
488 #define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
489 	do { } while (0)
490 #endif
491 
492 #if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST)
493 /* Get rcutorture access to sched_setaffinity(). */
494 long rcutorture_sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
495 {
496 	int ret;
497 
498 	ret = sched_setaffinity(pid, in_mask);
499 	WARN_ONCE(ret, "%s: sched_setaffinity() returned %d\n", __func__, ret);
500 	return ret;
501 }
502 EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity);
503 #endif
504 
505 #ifdef CONFIG_RCU_STALL_COMMON
506 int rcu_cpu_stall_ftrace_dump __read_mostly;
507 module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
508 int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings.
509 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
510 module_param(rcu_cpu_stall_suppress, int, 0644);
511 int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
512 module_param(rcu_cpu_stall_timeout, int, 0644);
513 #endif /* #ifdef CONFIG_RCU_STALL_COMMON */
514 
515 // Suppress boot-time RCU CPU stall warnings and rcutorture writer stall
516 // warnings.  Also used by rcutorture even if stall warnings are excluded.
517 int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls.
518 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot);
519 module_param(rcu_cpu_stall_suppress_at_boot, int, 0444);
520 
521 #ifdef CONFIG_PROVE_RCU
522 
523 /*
524  * Early boot self test parameters.
525  */
526 static bool rcu_self_test;
527 module_param(rcu_self_test, bool, 0444);
528 
529 static int rcu_self_test_counter;
530 
531 static void test_callback(struct rcu_head *r)
532 {
533 	rcu_self_test_counter++;
534 	pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
535 }
536 
537 DEFINE_STATIC_SRCU(early_srcu);
538 
539 struct early_boot_kfree_rcu {
540 	struct rcu_head rh;
541 };
542 
543 static void early_boot_test_call_rcu(void)
544 {
545 	static struct rcu_head head;
546 	static struct rcu_head shead;
547 	struct early_boot_kfree_rcu *rhp;
548 
549 	call_rcu(&head, test_callback);
550 	if (IS_ENABLED(CONFIG_SRCU))
551 		call_srcu(&early_srcu, &shead, test_callback);
552 	rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
553 	if (!WARN_ON_ONCE(!rhp))
554 		kfree_rcu(rhp, rh);
555 }
556 
557 void rcu_early_boot_tests(void)
558 {
559 	pr_info("Running RCU self tests\n");
560 
561 	if (rcu_self_test)
562 		early_boot_test_call_rcu();
563 	rcu_test_sync_prims();
564 }
565 
566 static int rcu_verify_early_boot_tests(void)
567 {
568 	int ret = 0;
569 	int early_boot_test_counter = 0;
570 
571 	if (rcu_self_test) {
572 		early_boot_test_counter++;
573 		rcu_barrier();
574 		if (IS_ENABLED(CONFIG_SRCU)) {
575 			early_boot_test_counter++;
576 			srcu_barrier(&early_srcu);
577 		}
578 	}
579 	if (rcu_self_test_counter != early_boot_test_counter) {
580 		WARN_ON(1);
581 		ret = -1;
582 	}
583 
584 	return ret;
585 }
586 late_initcall(rcu_verify_early_boot_tests);
587 #else
588 void rcu_early_boot_tests(void) {}
589 #endif /* CONFIG_PROVE_RCU */
590 
591 #include "tasks.h"
592 
593 #ifndef CONFIG_TINY_RCU
594 
595 /*
596  * Print any significant non-default boot-time settings.
597  */
598 void __init rcupdate_announce_bootup_oddness(void)
599 {
600 	if (rcu_normal)
601 		pr_info("\tNo expedited grace period (rcu_normal).\n");
602 	else if (rcu_normal_after_boot)
603 		pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n");
604 	else if (rcu_expedited)
605 		pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
606 	if (rcu_cpu_stall_suppress)
607 		pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
608 	if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
609 		pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
610 	rcu_tasks_bootup_oddness();
611 }
612 
613 #endif /* #ifndef CONFIG_TINY_RCU */
614