xref: /openbmc/linux/kernel/power/suspend_test.c (revision e3b9f1e8)
1 /*
2  * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
3  *
4  * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
5  *
6  * This file is released under the GPLv2.
7  */
8 
9 #include <linux/init.h>
10 #include <linux/rtc.h>
11 
12 #include "power.h"
13 
14 /*
15  * We test the system suspend code by setting an RTC wakealarm a short
16  * time in the future, then suspending.  Suspending the devices won't
17  * normally take long ... some systems only need a few milliseconds.
18  *
19  * The time it takes is system-specific though, so when we test this
20  * during system bootup we allow a LOT of time.
21  */
22 #define TEST_SUSPEND_SECONDS	10
23 
24 static unsigned long suspend_test_start_time;
25 static u32 test_repeat_count_max = 1;
26 static u32 test_repeat_count_current;
27 
28 void suspend_test_start(void)
29 {
30 	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
31 	 * What we want is a hardware counter that will work correctly even
32 	 * during the irqs-are-off stages of the suspend/resume cycle...
33 	 */
34 	suspend_test_start_time = jiffies;
35 }
36 
37 void suspend_test_finish(const char *label)
38 {
39 	long nj = jiffies - suspend_test_start_time;
40 	unsigned msec;
41 
42 	msec = jiffies_to_msecs(abs(nj));
43 	pr_info("PM: %s took %d.%03d seconds\n", label,
44 			msec / 1000, msec % 1000);
45 
46 	/* Warning on suspend means the RTC alarm period needs to be
47 	 * larger -- the system was sooo slooowwww to suspend that the
48 	 * alarm (should have) fired before the system went to sleep!
49 	 *
50 	 * Warning on either suspend or resume also means the system
51 	 * has some performance issues.  The stack dump of a WARN_ON
52 	 * is more likely to get the right attention than a printk...
53 	 */
54 	WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
55 	     "Component: %s, time: %u\n", label, msec);
56 }
57 
58 /*
59  * To test system suspend, we need a hands-off mechanism to resume the
60  * system.  RTCs wake alarms are a common self-contained mechanism.
61  */
62 
63 static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
64 {
65 	static char err_readtime[] __initdata =
66 		KERN_ERR "PM: can't read %s time, err %d\n";
67 	static char err_wakealarm [] __initdata =
68 		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
69 	static char err_suspend[] __initdata =
70 		KERN_ERR "PM: suspend test failed, error %d\n";
71 	static char info_test[] __initdata =
72 		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
73 
74 	unsigned long		now;
75 	struct rtc_wkalrm	alm;
76 	int			status;
77 
78 	/* this may fail if the RTC hasn't been initialized */
79 repeat:
80 	status = rtc_read_time(rtc, &alm.time);
81 	if (status < 0) {
82 		printk(err_readtime, dev_name(&rtc->dev), status);
83 		return;
84 	}
85 	rtc_tm_to_time(&alm.time, &now);
86 
87 	memset(&alm, 0, sizeof alm);
88 	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
89 	alm.enabled = true;
90 
91 	status = rtc_set_alarm(rtc, &alm);
92 	if (status < 0) {
93 		printk(err_wakealarm, dev_name(&rtc->dev), status);
94 		return;
95 	}
96 
97 	if (state == PM_SUSPEND_MEM) {
98 		printk(info_test, pm_states[state]);
99 		status = pm_suspend(state);
100 		if (status == -ENODEV)
101 			state = PM_SUSPEND_STANDBY;
102 	}
103 	if (state == PM_SUSPEND_STANDBY) {
104 		printk(info_test, pm_states[state]);
105 		status = pm_suspend(state);
106 		if (status < 0)
107 			state = PM_SUSPEND_TO_IDLE;
108 	}
109 	if (state == PM_SUSPEND_TO_IDLE) {
110 		printk(info_test, pm_states[state]);
111 		status = pm_suspend(state);
112 	}
113 
114 	if (status < 0)
115 		printk(err_suspend, status);
116 
117 	test_repeat_count_current++;
118 	if (test_repeat_count_current < test_repeat_count_max)
119 		goto repeat;
120 
121 	/* Some platforms can't detect that the alarm triggered the
122 	 * wakeup, or (accordingly) disable it after it afterwards.
123 	 * It's supposed to give oneshot behavior; cope.
124 	 */
125 	alm.enabled = false;
126 	rtc_set_alarm(rtc, &alm);
127 }
128 
129 static int __init has_wakealarm(struct device *dev, const void *data)
130 {
131 	struct rtc_device *candidate = to_rtc_device(dev);
132 
133 	if (!candidate->ops->set_alarm)
134 		return 0;
135 	if (!device_may_wakeup(candidate->dev.parent))
136 		return 0;
137 
138 	return 1;
139 }
140 
141 /*
142  * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
143  * at startup time.  They're normally disabled, for faster boot and because
144  * we can't know which states really work on this particular system.
145  */
146 static const char *test_state_label __initdata;
147 
148 static char warn_bad_state[] __initdata =
149 	KERN_WARNING "PM: can't test '%s' suspend state\n";
150 
151 static int __init setup_test_suspend(char *value)
152 {
153 	int i;
154 	char *repeat;
155 	char *suspend_type;
156 
157 	/* example : "=mem[,N]" ==> "mem[,N]" */
158 	value++;
159 	suspend_type = strsep(&value, ",");
160 	if (!suspend_type)
161 		return 0;
162 
163 	repeat = strsep(&value, ",");
164 	if (repeat) {
165 		if (kstrtou32(repeat, 0, &test_repeat_count_max))
166 			return 0;
167 	}
168 
169 	for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
170 		if (!strcmp(pm_labels[i], suspend_type)) {
171 			test_state_label = pm_labels[i];
172 			return 0;
173 		}
174 
175 	printk(warn_bad_state, suspend_type);
176 	return 0;
177 }
178 __setup("test_suspend", setup_test_suspend);
179 
180 static int __init test_suspend(void)
181 {
182 	static char		warn_no_rtc[] __initdata =
183 		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
184 
185 	struct rtc_device	*rtc = NULL;
186 	struct device		*dev;
187 	suspend_state_t test_state;
188 
189 	/* PM is initialized by now; is that state testable? */
190 	if (!test_state_label)
191 		return 0;
192 
193 	for (test_state = PM_SUSPEND_MIN; test_state < PM_SUSPEND_MAX; test_state++) {
194 		const char *state_label = pm_states[test_state];
195 
196 		if (state_label && !strcmp(test_state_label, state_label))
197 			break;
198 	}
199 	if (test_state == PM_SUSPEND_MAX) {
200 		printk(warn_bad_state, test_state_label);
201 		return 0;
202 	}
203 
204 	/* RTCs have initialized by now too ... can we use one? */
205 	dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm);
206 	if (dev) {
207 		rtc = rtc_class_open(dev_name(dev));
208 		put_device(dev);
209 	}
210 	if (!rtc) {
211 		printk(warn_no_rtc);
212 		return 0;
213 	}
214 
215 	/* go for it */
216 	test_wakealarm(rtc, test_state);
217 	rtc_class_close(rtc);
218 	return 0;
219 }
220 late_initcall(test_suspend);
221