xref: /openbmc/linux/kernel/power/hibernate.c (revision 83946783)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
4  *
5  * Copyright (c) 2003 Patrick Mochel
6  * Copyright (c) 2003 Open Source Development Lab
7  * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
8  * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
9  * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
10  */
11 
12 #define pr_fmt(fmt) "PM: hibernation: " fmt
13 
14 #include <linux/export.h>
15 #include <linux/suspend.h>
16 #include <linux/reboot.h>
17 #include <linux/string.h>
18 #include <linux/device.h>
19 #include <linux/async.h>
20 #include <linux/delay.h>
21 #include <linux/fs.h>
22 #include <linux/mount.h>
23 #include <linux/pm.h>
24 #include <linux/nmi.h>
25 #include <linux/console.h>
26 #include <linux/cpu.h>
27 #include <linux/freezer.h>
28 #include <linux/gfp.h>
29 #include <linux/syscore_ops.h>
30 #include <linux/ctype.h>
31 #include <linux/genhd.h>
32 #include <linux/ktime.h>
33 #include <linux/security.h>
34 #include <linux/secretmem.h>
35 #include <trace/events/power.h>
36 
37 #include "power.h"
38 
39 
40 static int nocompress;
41 static int noresume;
42 static int nohibernate;
43 static int resume_wait;
44 static unsigned int resume_delay;
45 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
46 dev_t swsusp_resume_device;
47 sector_t swsusp_resume_block;
48 __visible int in_suspend __nosavedata;
49 
50 enum {
51 	HIBERNATION_INVALID,
52 	HIBERNATION_PLATFORM,
53 	HIBERNATION_SHUTDOWN,
54 	HIBERNATION_REBOOT,
55 #ifdef CONFIG_SUSPEND
56 	HIBERNATION_SUSPEND,
57 #endif
58 	HIBERNATION_TEST_RESUME,
59 	/* keep last */
60 	__HIBERNATION_AFTER_LAST
61 };
62 #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
63 #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
64 
65 static int hibernation_mode = HIBERNATION_SHUTDOWN;
66 
67 bool freezer_test_done;
68 
69 static const struct platform_hibernation_ops *hibernation_ops;
70 
71 static atomic_t hibernate_atomic = ATOMIC_INIT(1);
72 
73 bool hibernate_acquire(void)
74 {
75 	return atomic_add_unless(&hibernate_atomic, -1, 0);
76 }
77 
78 void hibernate_release(void)
79 {
80 	atomic_inc(&hibernate_atomic);
81 }
82 
83 bool hibernation_available(void)
84 {
85 	return nohibernate == 0 &&
86 		!security_locked_down(LOCKDOWN_HIBERNATION) &&
87 		!secretmem_active();
88 }
89 
90 /**
91  * hibernation_set_ops - Set the global hibernate operations.
92  * @ops: Hibernation operations to use in subsequent hibernation transitions.
93  */
94 void hibernation_set_ops(const struct platform_hibernation_ops *ops)
95 {
96 	if (ops && !(ops->begin && ops->end &&  ops->pre_snapshot
97 	    && ops->prepare && ops->finish && ops->enter && ops->pre_restore
98 	    && ops->restore_cleanup && ops->leave)) {
99 		WARN_ON(1);
100 		return;
101 	}
102 	lock_system_sleep();
103 	hibernation_ops = ops;
104 	if (ops)
105 		hibernation_mode = HIBERNATION_PLATFORM;
106 	else if (hibernation_mode == HIBERNATION_PLATFORM)
107 		hibernation_mode = HIBERNATION_SHUTDOWN;
108 
109 	unlock_system_sleep();
110 }
111 EXPORT_SYMBOL_GPL(hibernation_set_ops);
112 
113 static bool entering_platform_hibernation;
114 
115 bool system_entering_hibernation(void)
116 {
117 	return entering_platform_hibernation;
118 }
119 EXPORT_SYMBOL(system_entering_hibernation);
120 
121 #ifdef CONFIG_PM_DEBUG
122 static void hibernation_debug_sleep(void)
123 {
124 	pr_info("debug: Waiting for 5 seconds.\n");
125 	mdelay(5000);
126 }
127 
128 static int hibernation_test(int level)
129 {
130 	if (pm_test_level == level) {
131 		hibernation_debug_sleep();
132 		return 1;
133 	}
134 	return 0;
135 }
136 #else /* !CONFIG_PM_DEBUG */
137 static int hibernation_test(int level) { return 0; }
138 #endif /* !CONFIG_PM_DEBUG */
139 
140 /**
141  * platform_begin - Call platform to start hibernation.
142  * @platform_mode: Whether or not to use the platform driver.
143  */
144 static int platform_begin(int platform_mode)
145 {
146 	return (platform_mode && hibernation_ops) ?
147 		hibernation_ops->begin(PMSG_FREEZE) : 0;
148 }
149 
150 /**
151  * platform_end - Call platform to finish transition to the working state.
152  * @platform_mode: Whether or not to use the platform driver.
153  */
154 static void platform_end(int platform_mode)
155 {
156 	if (platform_mode && hibernation_ops)
157 		hibernation_ops->end();
158 }
159 
160 /**
161  * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
162  * @platform_mode: Whether or not to use the platform driver.
163  *
164  * Use the platform driver to prepare the system for creating a hibernate image,
165  * if so configured, and return an error code if that fails.
166  */
167 
168 static int platform_pre_snapshot(int platform_mode)
169 {
170 	return (platform_mode && hibernation_ops) ?
171 		hibernation_ops->pre_snapshot() : 0;
172 }
173 
174 /**
175  * platform_leave - Call platform to prepare a transition to the working state.
176  * @platform_mode: Whether or not to use the platform driver.
177  *
178  * Use the platform driver prepare to prepare the machine for switching to the
179  * normal mode of operation.
180  *
181  * This routine is called on one CPU with interrupts disabled.
182  */
183 static void platform_leave(int platform_mode)
184 {
185 	if (platform_mode && hibernation_ops)
186 		hibernation_ops->leave();
187 }
188 
189 /**
190  * platform_finish - Call platform to switch the system to the working state.
191  * @platform_mode: Whether or not to use the platform driver.
192  *
193  * Use the platform driver to switch the machine to the normal mode of
194  * operation.
195  *
196  * This routine must be called after platform_prepare().
197  */
198 static void platform_finish(int platform_mode)
199 {
200 	if (platform_mode && hibernation_ops)
201 		hibernation_ops->finish();
202 }
203 
204 /**
205  * platform_pre_restore - Prepare for hibernate image restoration.
206  * @platform_mode: Whether or not to use the platform driver.
207  *
208  * Use the platform driver to prepare the system for resume from a hibernation
209  * image.
210  *
211  * If the restore fails after this function has been called,
212  * platform_restore_cleanup() must be called.
213  */
214 static int platform_pre_restore(int platform_mode)
215 {
216 	return (platform_mode && hibernation_ops) ?
217 		hibernation_ops->pre_restore() : 0;
218 }
219 
220 /**
221  * platform_restore_cleanup - Switch to the working state after failing restore.
222  * @platform_mode: Whether or not to use the platform driver.
223  *
224  * Use the platform driver to switch the system to the normal mode of operation
225  * after a failing restore.
226  *
227  * If platform_pre_restore() has been called before the failing restore, this
228  * function must be called too, regardless of the result of
229  * platform_pre_restore().
230  */
231 static void platform_restore_cleanup(int platform_mode)
232 {
233 	if (platform_mode && hibernation_ops)
234 		hibernation_ops->restore_cleanup();
235 }
236 
237 /**
238  * platform_recover - Recover from a failure to suspend devices.
239  * @platform_mode: Whether or not to use the platform driver.
240  */
241 static void platform_recover(int platform_mode)
242 {
243 	if (platform_mode && hibernation_ops && hibernation_ops->recover)
244 		hibernation_ops->recover();
245 }
246 
247 /**
248  * swsusp_show_speed - Print time elapsed between two events during hibernation.
249  * @start: Starting event.
250  * @stop: Final event.
251  * @nr_pages: Number of memory pages processed between @start and @stop.
252  * @msg: Additional diagnostic message to print.
253  */
254 void swsusp_show_speed(ktime_t start, ktime_t stop,
255 		      unsigned nr_pages, char *msg)
256 {
257 	ktime_t diff;
258 	u64 elapsed_centisecs64;
259 	unsigned int centisecs;
260 	unsigned int k;
261 	unsigned int kps;
262 
263 	diff = ktime_sub(stop, start);
264 	elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
265 	centisecs = elapsed_centisecs64;
266 	if (centisecs == 0)
267 		centisecs = 1;	/* avoid div-by-zero */
268 	k = nr_pages * (PAGE_SIZE / 1024);
269 	kps = (k * 100) / centisecs;
270 	pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
271 		msg, k, centisecs / 100, centisecs % 100, kps / 1000,
272 		(kps % 1000) / 10);
273 }
274 
275 __weak int arch_resume_nosmt(void)
276 {
277 	return 0;
278 }
279 
280 /**
281  * create_image - Create a hibernation image.
282  * @platform_mode: Whether or not to use the platform driver.
283  *
284  * Execute device drivers' "late" and "noirq" freeze callbacks, create a
285  * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
286  *
287  * Control reappears in this routine after the subsequent restore.
288  */
289 static int create_image(int platform_mode)
290 {
291 	int error;
292 
293 	error = dpm_suspend_end(PMSG_FREEZE);
294 	if (error) {
295 		pr_err("Some devices failed to power down, aborting\n");
296 		return error;
297 	}
298 
299 	error = platform_pre_snapshot(platform_mode);
300 	if (error || hibernation_test(TEST_PLATFORM))
301 		goto Platform_finish;
302 
303 	error = pm_sleep_disable_secondary_cpus();
304 	if (error || hibernation_test(TEST_CPUS))
305 		goto Enable_cpus;
306 
307 	local_irq_disable();
308 
309 	system_state = SYSTEM_SUSPEND;
310 
311 	error = syscore_suspend();
312 	if (error) {
313 		pr_err("Some system devices failed to power down, aborting\n");
314 		goto Enable_irqs;
315 	}
316 
317 	if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
318 		goto Power_up;
319 
320 	in_suspend = 1;
321 	save_processor_state();
322 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
323 	error = swsusp_arch_suspend();
324 	/* Restore control flow magically appears here */
325 	restore_processor_state();
326 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
327 	if (error)
328 		pr_err("Error %d creating image\n", error);
329 
330 	if (!in_suspend) {
331 		events_check_enabled = false;
332 		clear_or_poison_free_pages();
333 	}
334 
335 	platform_leave(platform_mode);
336 
337  Power_up:
338 	syscore_resume();
339 
340  Enable_irqs:
341 	system_state = SYSTEM_RUNNING;
342 	local_irq_enable();
343 
344  Enable_cpus:
345 	pm_sleep_enable_secondary_cpus();
346 
347 	/* Allow architectures to do nosmt-specific post-resume dances */
348 	if (!in_suspend)
349 		error = arch_resume_nosmt();
350 
351  Platform_finish:
352 	platform_finish(platform_mode);
353 
354 	dpm_resume_start(in_suspend ?
355 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
356 
357 	return error;
358 }
359 
360 /**
361  * hibernation_snapshot - Quiesce devices and create a hibernation image.
362  * @platform_mode: If set, use platform driver to prepare for the transition.
363  *
364  * This routine must be called with system_transition_mutex held.
365  */
366 int hibernation_snapshot(int platform_mode)
367 {
368 	pm_message_t msg;
369 	int error;
370 
371 	pm_suspend_clear_flags();
372 	error = platform_begin(platform_mode);
373 	if (error)
374 		goto Close;
375 
376 	/* Preallocate image memory before shutting down devices. */
377 	error = hibernate_preallocate_memory();
378 	if (error)
379 		goto Close;
380 
381 	error = freeze_kernel_threads();
382 	if (error)
383 		goto Cleanup;
384 
385 	if (hibernation_test(TEST_FREEZER)) {
386 
387 		/*
388 		 * Indicate to the caller that we are returning due to a
389 		 * successful freezer test.
390 		 */
391 		freezer_test_done = true;
392 		goto Thaw;
393 	}
394 
395 	error = dpm_prepare(PMSG_FREEZE);
396 	if (error) {
397 		dpm_complete(PMSG_RECOVER);
398 		goto Thaw;
399 	}
400 
401 	suspend_console();
402 	pm_restrict_gfp_mask();
403 
404 	error = dpm_suspend(PMSG_FREEZE);
405 
406 	if (error || hibernation_test(TEST_DEVICES))
407 		platform_recover(platform_mode);
408 	else
409 		error = create_image(platform_mode);
410 
411 	/*
412 	 * In the case that we call create_image() above, the control
413 	 * returns here (1) after the image has been created or the
414 	 * image creation has failed and (2) after a successful restore.
415 	 */
416 
417 	/* We may need to release the preallocated image pages here. */
418 	if (error || !in_suspend)
419 		swsusp_free();
420 
421 	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
422 	dpm_resume(msg);
423 
424 	if (error || !in_suspend)
425 		pm_restore_gfp_mask();
426 
427 	resume_console();
428 	dpm_complete(msg);
429 
430  Close:
431 	platform_end(platform_mode);
432 	return error;
433 
434  Thaw:
435 	thaw_kernel_threads();
436  Cleanup:
437 	swsusp_free();
438 	goto Close;
439 }
440 
441 int __weak hibernate_resume_nonboot_cpu_disable(void)
442 {
443 	return suspend_disable_secondary_cpus();
444 }
445 
446 /**
447  * resume_target_kernel - Restore system state from a hibernation image.
448  * @platform_mode: Whether or not to use the platform driver.
449  *
450  * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
451  * contents of highmem that have not been restored yet from the image and run
452  * the low-level code that will restore the remaining contents of memory and
453  * switch to the just restored target kernel.
454  */
455 static int resume_target_kernel(bool platform_mode)
456 {
457 	int error;
458 
459 	error = dpm_suspend_end(PMSG_QUIESCE);
460 	if (error) {
461 		pr_err("Some devices failed to power down, aborting resume\n");
462 		return error;
463 	}
464 
465 	error = platform_pre_restore(platform_mode);
466 	if (error)
467 		goto Cleanup;
468 
469 	cpuidle_pause();
470 
471 	error = hibernate_resume_nonboot_cpu_disable();
472 	if (error)
473 		goto Enable_cpus;
474 
475 	local_irq_disable();
476 	system_state = SYSTEM_SUSPEND;
477 
478 	error = syscore_suspend();
479 	if (error)
480 		goto Enable_irqs;
481 
482 	save_processor_state();
483 	error = restore_highmem();
484 	if (!error) {
485 		error = swsusp_arch_resume();
486 		/*
487 		 * The code below is only ever reached in case of a failure.
488 		 * Otherwise, execution continues at the place where
489 		 * swsusp_arch_suspend() was called.
490 		 */
491 		BUG_ON(!error);
492 		/*
493 		 * This call to restore_highmem() reverts the changes made by
494 		 * the previous one.
495 		 */
496 		restore_highmem();
497 	}
498 	/*
499 	 * The only reason why swsusp_arch_resume() can fail is memory being
500 	 * very tight, so we have to free it as soon as we can to avoid
501 	 * subsequent failures.
502 	 */
503 	swsusp_free();
504 	restore_processor_state();
505 	touch_softlockup_watchdog();
506 
507 	syscore_resume();
508 
509  Enable_irqs:
510 	system_state = SYSTEM_RUNNING;
511 	local_irq_enable();
512 
513  Enable_cpus:
514 	pm_sleep_enable_secondary_cpus();
515 
516  Cleanup:
517 	platform_restore_cleanup(platform_mode);
518 
519 	dpm_resume_start(PMSG_RECOVER);
520 
521 	return error;
522 }
523 
524 /**
525  * hibernation_restore - Quiesce devices and restore from a hibernation image.
526  * @platform_mode: If set, use platform driver to prepare for the transition.
527  *
528  * This routine must be called with system_transition_mutex held.  If it is
529  * successful, control reappears in the restored target kernel in
530  * hibernation_snapshot().
531  */
532 int hibernation_restore(int platform_mode)
533 {
534 	int error;
535 
536 	pm_prepare_console();
537 	suspend_console();
538 	pm_restrict_gfp_mask();
539 	error = dpm_suspend_start(PMSG_QUIESCE);
540 	if (!error) {
541 		error = resume_target_kernel(platform_mode);
542 		/*
543 		 * The above should either succeed and jump to the new kernel,
544 		 * or return with an error. Otherwise things are just
545 		 * undefined, so let's be paranoid.
546 		 */
547 		BUG_ON(!error);
548 	}
549 	dpm_resume_end(PMSG_RECOVER);
550 	pm_restore_gfp_mask();
551 	resume_console();
552 	pm_restore_console();
553 	return error;
554 }
555 
556 /**
557  * hibernation_platform_enter - Power off the system using the platform driver.
558  */
559 int hibernation_platform_enter(void)
560 {
561 	int error;
562 
563 	if (!hibernation_ops)
564 		return -ENOSYS;
565 
566 	/*
567 	 * We have cancelled the power transition by running
568 	 * hibernation_ops->finish() before saving the image, so we should let
569 	 * the firmware know that we're going to enter the sleep state after all
570 	 */
571 	error = hibernation_ops->begin(PMSG_HIBERNATE);
572 	if (error)
573 		goto Close;
574 
575 	entering_platform_hibernation = true;
576 	suspend_console();
577 	error = dpm_suspend_start(PMSG_HIBERNATE);
578 	if (error) {
579 		if (hibernation_ops->recover)
580 			hibernation_ops->recover();
581 		goto Resume_devices;
582 	}
583 
584 	error = dpm_suspend_end(PMSG_HIBERNATE);
585 	if (error)
586 		goto Resume_devices;
587 
588 	error = hibernation_ops->prepare();
589 	if (error)
590 		goto Platform_finish;
591 
592 	error = pm_sleep_disable_secondary_cpus();
593 	if (error)
594 		goto Enable_cpus;
595 
596 	local_irq_disable();
597 	system_state = SYSTEM_SUSPEND;
598 	syscore_suspend();
599 	if (pm_wakeup_pending()) {
600 		error = -EAGAIN;
601 		goto Power_up;
602 	}
603 
604 	hibernation_ops->enter();
605 	/* We should never get here */
606 	while (1);
607 
608  Power_up:
609 	syscore_resume();
610 	system_state = SYSTEM_RUNNING;
611 	local_irq_enable();
612 
613  Enable_cpus:
614 	pm_sleep_enable_secondary_cpus();
615 
616  Platform_finish:
617 	hibernation_ops->finish();
618 
619 	dpm_resume_start(PMSG_RESTORE);
620 
621  Resume_devices:
622 	entering_platform_hibernation = false;
623 	dpm_resume_end(PMSG_RESTORE);
624 	resume_console();
625 
626  Close:
627 	hibernation_ops->end();
628 
629 	return error;
630 }
631 
632 /**
633  * power_down - Shut the machine down for hibernation.
634  *
635  * Use the platform driver, if configured, to put the system into the sleep
636  * state corresponding to hibernation, or try to power it off or reboot,
637  * depending on the value of hibernation_mode.
638  */
639 static void power_down(void)
640 {
641 #ifdef CONFIG_SUSPEND
642 	int error;
643 
644 	if (hibernation_mode == HIBERNATION_SUSPEND) {
645 		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
646 		if (error) {
647 			hibernation_mode = hibernation_ops ?
648 						HIBERNATION_PLATFORM :
649 						HIBERNATION_SHUTDOWN;
650 		} else {
651 			/* Restore swap signature. */
652 			error = swsusp_unmark();
653 			if (error)
654 				pr_err("Swap will be unusable! Try swapon -a.\n");
655 
656 			return;
657 		}
658 	}
659 #endif
660 
661 	switch (hibernation_mode) {
662 	case HIBERNATION_REBOOT:
663 		kernel_restart(NULL);
664 		break;
665 	case HIBERNATION_PLATFORM:
666 		hibernation_platform_enter();
667 		fallthrough;
668 	case HIBERNATION_SHUTDOWN:
669 		if (pm_power_off)
670 			kernel_power_off();
671 		break;
672 	}
673 	kernel_halt();
674 	/*
675 	 * Valid image is on the disk, if we continue we risk serious data
676 	 * corruption after resume.
677 	 */
678 	pr_crit("Power down manually\n");
679 	while (1)
680 		cpu_relax();
681 }
682 
683 static int load_image_and_restore(void)
684 {
685 	int error;
686 	unsigned int flags;
687 
688 	pm_pr_dbg("Loading hibernation image.\n");
689 
690 	lock_device_hotplug();
691 	error = create_basic_memory_bitmaps();
692 	if (error)
693 		goto Unlock;
694 
695 	error = swsusp_read(&flags);
696 	swsusp_close(FMODE_READ);
697 	if (!error)
698 		error = hibernation_restore(flags & SF_PLATFORM_MODE);
699 
700 	pr_err("Failed to load image, recovering.\n");
701 	swsusp_free();
702 	free_basic_memory_bitmaps();
703  Unlock:
704 	unlock_device_hotplug();
705 
706 	return error;
707 }
708 
709 /**
710  * hibernate - Carry out system hibernation, including saving the image.
711  */
712 int hibernate(void)
713 {
714 	bool snapshot_test = false;
715 	int error;
716 
717 	if (!hibernation_available()) {
718 		pm_pr_dbg("Hibernation not available.\n");
719 		return -EPERM;
720 	}
721 
722 	lock_system_sleep();
723 	/* The snapshot device should not be opened while we're running */
724 	if (!hibernate_acquire()) {
725 		error = -EBUSY;
726 		goto Unlock;
727 	}
728 
729 	pr_info("hibernation entry\n");
730 	pm_prepare_console();
731 	error = pm_notifier_call_chain_robust(PM_HIBERNATION_PREPARE, PM_POST_HIBERNATION);
732 	if (error)
733 		goto Restore;
734 
735 	ksys_sync_helper();
736 
737 	error = freeze_processes();
738 	if (error)
739 		goto Exit;
740 
741 	lock_device_hotplug();
742 	/* Allocate memory management structures */
743 	error = create_basic_memory_bitmaps();
744 	if (error)
745 		goto Thaw;
746 
747 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
748 	if (error || freezer_test_done)
749 		goto Free_bitmaps;
750 
751 	if (in_suspend) {
752 		unsigned int flags = 0;
753 
754 		if (hibernation_mode == HIBERNATION_PLATFORM)
755 			flags |= SF_PLATFORM_MODE;
756 		if (nocompress)
757 			flags |= SF_NOCOMPRESS_MODE;
758 		else
759 		        flags |= SF_CRC32_MODE;
760 
761 		pm_pr_dbg("Writing hibernation image.\n");
762 		error = swsusp_write(flags);
763 		swsusp_free();
764 		if (!error) {
765 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
766 				snapshot_test = true;
767 			else
768 				power_down();
769 		}
770 		in_suspend = 0;
771 		pm_restore_gfp_mask();
772 	} else {
773 		pm_pr_dbg("Hibernation image restored successfully.\n");
774 	}
775 
776  Free_bitmaps:
777 	free_basic_memory_bitmaps();
778  Thaw:
779 	unlock_device_hotplug();
780 	if (snapshot_test) {
781 		pm_pr_dbg("Checking hibernation image\n");
782 		error = swsusp_check();
783 		if (!error)
784 			error = load_image_and_restore();
785 	}
786 	thaw_processes();
787 
788 	/* Don't bother checking whether freezer_test_done is true */
789 	freezer_test_done = false;
790  Exit:
791 	pm_notifier_call_chain(PM_POST_HIBERNATION);
792  Restore:
793 	pm_restore_console();
794 	hibernate_release();
795  Unlock:
796 	unlock_system_sleep();
797 	pr_info("hibernation exit\n");
798 
799 	return error;
800 }
801 
802 /**
803  * hibernate_quiet_exec - Execute a function with all devices frozen.
804  * @func: Function to execute.
805  * @data: Data pointer to pass to @func.
806  *
807  * Return the @func return value or an error code if it cannot be executed.
808  */
809 int hibernate_quiet_exec(int (*func)(void *data), void *data)
810 {
811 	int error;
812 
813 	lock_system_sleep();
814 
815 	if (!hibernate_acquire()) {
816 		error = -EBUSY;
817 		goto unlock;
818 	}
819 
820 	pm_prepare_console();
821 
822 	error = pm_notifier_call_chain_robust(PM_HIBERNATION_PREPARE, PM_POST_HIBERNATION);
823 	if (error)
824 		goto restore;
825 
826 	error = freeze_processes();
827 	if (error)
828 		goto exit;
829 
830 	lock_device_hotplug();
831 
832 	pm_suspend_clear_flags();
833 
834 	error = platform_begin(true);
835 	if (error)
836 		goto thaw;
837 
838 	error = freeze_kernel_threads();
839 	if (error)
840 		goto thaw;
841 
842 	error = dpm_prepare(PMSG_FREEZE);
843 	if (error)
844 		goto dpm_complete;
845 
846 	suspend_console();
847 
848 	error = dpm_suspend(PMSG_FREEZE);
849 	if (error)
850 		goto dpm_resume;
851 
852 	error = dpm_suspend_end(PMSG_FREEZE);
853 	if (error)
854 		goto dpm_resume;
855 
856 	error = platform_pre_snapshot(true);
857 	if (error)
858 		goto skip;
859 
860 	error = func(data);
861 
862 skip:
863 	platform_finish(true);
864 
865 	dpm_resume_start(PMSG_THAW);
866 
867 dpm_resume:
868 	dpm_resume(PMSG_THAW);
869 
870 	resume_console();
871 
872 dpm_complete:
873 	dpm_complete(PMSG_THAW);
874 
875 	thaw_kernel_threads();
876 
877 thaw:
878 	platform_end(true);
879 
880 	unlock_device_hotplug();
881 
882 	thaw_processes();
883 
884 exit:
885 	pm_notifier_call_chain(PM_POST_HIBERNATION);
886 
887 restore:
888 	pm_restore_console();
889 
890 	hibernate_release();
891 
892 unlock:
893 	unlock_system_sleep();
894 
895 	return error;
896 }
897 EXPORT_SYMBOL_GPL(hibernate_quiet_exec);
898 
899 /**
900  * software_resume - Resume from a saved hibernation image.
901  *
902  * This routine is called as a late initcall, when all devices have been
903  * discovered and initialized already.
904  *
905  * The image reading code is called to see if there is a hibernation image
906  * available for reading.  If that is the case, devices are quiesced and the
907  * contents of memory is restored from the saved image.
908  *
909  * If this is successful, control reappears in the restored target kernel in
910  * hibernation_snapshot() which returns to hibernate().  Otherwise, the routine
911  * attempts to recover gracefully and make the kernel return to the normal mode
912  * of operation.
913  */
914 static int software_resume(void)
915 {
916 	int error;
917 
918 	/*
919 	 * If the user said "noresume".. bail out early.
920 	 */
921 	if (noresume || !hibernation_available())
922 		return 0;
923 
924 	/*
925 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
926 	 * is configured into the kernel. Since the regular hibernate
927 	 * trigger path is via sysfs which takes a buffer mutex before
928 	 * calling hibernate functions (which take system_transition_mutex)
929 	 * this can cause lockdep to complain about a possible ABBA deadlock
930 	 * which cannot happen since we're in the boot code here and
931 	 * sysfs can't be invoked yet. Therefore, we use a subclass
932 	 * here to avoid lockdep complaining.
933 	 */
934 	mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
935 
936 	if (swsusp_resume_device)
937 		goto Check_image;
938 
939 	if (!strlen(resume_file)) {
940 		error = -ENOENT;
941 		goto Unlock;
942 	}
943 
944 	pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
945 
946 	if (resume_delay) {
947 		pr_info("Waiting %dsec before reading resume device ...\n",
948 			resume_delay);
949 		ssleep(resume_delay);
950 	}
951 
952 	/* Check if the device is there */
953 	swsusp_resume_device = name_to_dev_t(resume_file);
954 	if (!swsusp_resume_device) {
955 		/*
956 		 * Some device discovery might still be in progress; we need
957 		 * to wait for this to finish.
958 		 */
959 		wait_for_device_probe();
960 
961 		if (resume_wait) {
962 			while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
963 				msleep(10);
964 			async_synchronize_full();
965 		}
966 
967 		swsusp_resume_device = name_to_dev_t(resume_file);
968 		if (!swsusp_resume_device) {
969 			error = -ENODEV;
970 			goto Unlock;
971 		}
972 	}
973 
974  Check_image:
975 	pm_pr_dbg("Hibernation image partition %d:%d present\n",
976 		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
977 
978 	pm_pr_dbg("Looking for hibernation image.\n");
979 	error = swsusp_check();
980 	if (error)
981 		goto Unlock;
982 
983 	/* The snapshot device should not be opened while we're running */
984 	if (!hibernate_acquire()) {
985 		error = -EBUSY;
986 		swsusp_close(FMODE_READ);
987 		goto Unlock;
988 	}
989 
990 	pr_info("resume from hibernation\n");
991 	pm_prepare_console();
992 	error = pm_notifier_call_chain_robust(PM_RESTORE_PREPARE, PM_POST_RESTORE);
993 	if (error)
994 		goto Restore;
995 
996 	pm_pr_dbg("Preparing processes for hibernation restore.\n");
997 	error = freeze_processes();
998 	if (error)
999 		goto Close_Finish;
1000 
1001 	error = freeze_kernel_threads();
1002 	if (error) {
1003 		thaw_processes();
1004 		goto Close_Finish;
1005 	}
1006 
1007 	error = load_image_and_restore();
1008 	thaw_processes();
1009  Finish:
1010 	pm_notifier_call_chain(PM_POST_RESTORE);
1011  Restore:
1012 	pm_restore_console();
1013 	pr_info("resume failed (%d)\n", error);
1014 	hibernate_release();
1015 	/* For success case, the suspend path will release the lock */
1016  Unlock:
1017 	mutex_unlock(&system_transition_mutex);
1018 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
1019 	return error;
1020  Close_Finish:
1021 	swsusp_close(FMODE_READ);
1022 	goto Finish;
1023 }
1024 
1025 late_initcall_sync(software_resume);
1026 
1027 
1028 static const char * const hibernation_modes[] = {
1029 	[HIBERNATION_PLATFORM]	= "platform",
1030 	[HIBERNATION_SHUTDOWN]	= "shutdown",
1031 	[HIBERNATION_REBOOT]	= "reboot",
1032 #ifdef CONFIG_SUSPEND
1033 	[HIBERNATION_SUSPEND]	= "suspend",
1034 #endif
1035 	[HIBERNATION_TEST_RESUME]	= "test_resume",
1036 };
1037 
1038 /*
1039  * /sys/power/disk - Control hibernation mode.
1040  *
1041  * Hibernation can be handled in several ways.  There are a few different ways
1042  * to put the system into the sleep state: using the platform driver (e.g. ACPI
1043  * or other hibernation_ops), powering it off or rebooting it (for testing
1044  * mostly).
1045  *
1046  * The sysfs file /sys/power/disk provides an interface for selecting the
1047  * hibernation mode to use.  Reading from this file causes the available modes
1048  * to be printed.  There are 3 modes that can be supported:
1049  *
1050  *	'platform'
1051  *	'shutdown'
1052  *	'reboot'
1053  *
1054  * If a platform hibernation driver is in use, 'platform' will be supported
1055  * and will be used by default.  Otherwise, 'shutdown' will be used by default.
1056  * The selected option (i.e. the one corresponding to the current value of
1057  * hibernation_mode) is enclosed by a square bracket.
1058  *
1059  * To select a given hibernation mode it is necessary to write the mode's
1060  * string representation (as returned by reading from /sys/power/disk) back
1061  * into /sys/power/disk.
1062  */
1063 
1064 static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
1065 			 char *buf)
1066 {
1067 	int i;
1068 	char *start = buf;
1069 
1070 	if (!hibernation_available())
1071 		return sprintf(buf, "[disabled]\n");
1072 
1073 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1074 		if (!hibernation_modes[i])
1075 			continue;
1076 		switch (i) {
1077 		case HIBERNATION_SHUTDOWN:
1078 		case HIBERNATION_REBOOT:
1079 #ifdef CONFIG_SUSPEND
1080 		case HIBERNATION_SUSPEND:
1081 #endif
1082 		case HIBERNATION_TEST_RESUME:
1083 			break;
1084 		case HIBERNATION_PLATFORM:
1085 			if (hibernation_ops)
1086 				break;
1087 			/* not a valid mode, continue with loop */
1088 			continue;
1089 		}
1090 		if (i == hibernation_mode)
1091 			buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
1092 		else
1093 			buf += sprintf(buf, "%s ", hibernation_modes[i]);
1094 	}
1095 	buf += sprintf(buf, "\n");
1096 	return buf-start;
1097 }
1098 
1099 static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
1100 			  const char *buf, size_t n)
1101 {
1102 	int error = 0;
1103 	int i;
1104 	int len;
1105 	char *p;
1106 	int mode = HIBERNATION_INVALID;
1107 
1108 	if (!hibernation_available())
1109 		return -EPERM;
1110 
1111 	p = memchr(buf, '\n', n);
1112 	len = p ? p - buf : n;
1113 
1114 	lock_system_sleep();
1115 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1116 		if (len == strlen(hibernation_modes[i])
1117 		    && !strncmp(buf, hibernation_modes[i], len)) {
1118 			mode = i;
1119 			break;
1120 		}
1121 	}
1122 	if (mode != HIBERNATION_INVALID) {
1123 		switch (mode) {
1124 		case HIBERNATION_SHUTDOWN:
1125 		case HIBERNATION_REBOOT:
1126 #ifdef CONFIG_SUSPEND
1127 		case HIBERNATION_SUSPEND:
1128 #endif
1129 		case HIBERNATION_TEST_RESUME:
1130 			hibernation_mode = mode;
1131 			break;
1132 		case HIBERNATION_PLATFORM:
1133 			if (hibernation_ops)
1134 				hibernation_mode = mode;
1135 			else
1136 				error = -EINVAL;
1137 		}
1138 	} else
1139 		error = -EINVAL;
1140 
1141 	if (!error)
1142 		pm_pr_dbg("Hibernation mode set to '%s'\n",
1143 			       hibernation_modes[mode]);
1144 	unlock_system_sleep();
1145 	return error ? error : n;
1146 }
1147 
1148 power_attr(disk);
1149 
1150 static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1151 			   char *buf)
1152 {
1153 	return sprintf(buf, "%d:%d\n", MAJOR(swsusp_resume_device),
1154 		       MINOR(swsusp_resume_device));
1155 }
1156 
1157 static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1158 			    const char *buf, size_t n)
1159 {
1160 	dev_t res;
1161 	int len = n;
1162 	char *name;
1163 
1164 	if (len && buf[len-1] == '\n')
1165 		len--;
1166 	name = kstrndup(buf, len, GFP_KERNEL);
1167 	if (!name)
1168 		return -ENOMEM;
1169 
1170 	res = name_to_dev_t(name);
1171 	kfree(name);
1172 	if (!res)
1173 		return -EINVAL;
1174 
1175 	lock_system_sleep();
1176 	swsusp_resume_device = res;
1177 	unlock_system_sleep();
1178 	pm_pr_dbg("Configured hibernation resume from disk to %u\n",
1179 		  swsusp_resume_device);
1180 	noresume = 0;
1181 	software_resume();
1182 	return n;
1183 }
1184 
1185 power_attr(resume);
1186 
1187 static ssize_t resume_offset_show(struct kobject *kobj,
1188 				  struct kobj_attribute *attr, char *buf)
1189 {
1190 	return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
1191 }
1192 
1193 static ssize_t resume_offset_store(struct kobject *kobj,
1194 				   struct kobj_attribute *attr, const char *buf,
1195 				   size_t n)
1196 {
1197 	unsigned long long offset;
1198 	int rc;
1199 
1200 	rc = kstrtoull(buf, 0, &offset);
1201 	if (rc)
1202 		return rc;
1203 	swsusp_resume_block = offset;
1204 
1205 	return n;
1206 }
1207 
1208 power_attr(resume_offset);
1209 
1210 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1211 			       char *buf)
1212 {
1213 	return sprintf(buf, "%lu\n", image_size);
1214 }
1215 
1216 static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1217 				const char *buf, size_t n)
1218 {
1219 	unsigned long size;
1220 
1221 	if (sscanf(buf, "%lu", &size) == 1) {
1222 		image_size = size;
1223 		return n;
1224 	}
1225 
1226 	return -EINVAL;
1227 }
1228 
1229 power_attr(image_size);
1230 
1231 static ssize_t reserved_size_show(struct kobject *kobj,
1232 				  struct kobj_attribute *attr, char *buf)
1233 {
1234 	return sprintf(buf, "%lu\n", reserved_size);
1235 }
1236 
1237 static ssize_t reserved_size_store(struct kobject *kobj,
1238 				   struct kobj_attribute *attr,
1239 				   const char *buf, size_t n)
1240 {
1241 	unsigned long size;
1242 
1243 	if (sscanf(buf, "%lu", &size) == 1) {
1244 		reserved_size = size;
1245 		return n;
1246 	}
1247 
1248 	return -EINVAL;
1249 }
1250 
1251 power_attr(reserved_size);
1252 
1253 static struct attribute *g[] = {
1254 	&disk_attr.attr,
1255 	&resume_offset_attr.attr,
1256 	&resume_attr.attr,
1257 	&image_size_attr.attr,
1258 	&reserved_size_attr.attr,
1259 	NULL,
1260 };
1261 
1262 
1263 static const struct attribute_group attr_group = {
1264 	.attrs = g,
1265 };
1266 
1267 
1268 static int __init pm_disk_init(void)
1269 {
1270 	return sysfs_create_group(power_kobj, &attr_group);
1271 }
1272 
1273 core_initcall(pm_disk_init);
1274 
1275 
1276 static int __init resume_setup(char *str)
1277 {
1278 	if (noresume)
1279 		return 1;
1280 
1281 	strncpy(resume_file, str, 255);
1282 	return 1;
1283 }
1284 
1285 static int __init resume_offset_setup(char *str)
1286 {
1287 	unsigned long long offset;
1288 
1289 	if (noresume)
1290 		return 1;
1291 
1292 	if (sscanf(str, "%llu", &offset) == 1)
1293 		swsusp_resume_block = offset;
1294 
1295 	return 1;
1296 }
1297 
1298 static int __init hibernate_setup(char *str)
1299 {
1300 	if (!strncmp(str, "noresume", 8)) {
1301 		noresume = 1;
1302 	} else if (!strncmp(str, "nocompress", 10)) {
1303 		nocompress = 1;
1304 	} else if (!strncmp(str, "no", 2)) {
1305 		noresume = 1;
1306 		nohibernate = 1;
1307 	} else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1308 		   && !strncmp(str, "protect_image", 13)) {
1309 		enable_restore_image_protection();
1310 	}
1311 	return 1;
1312 }
1313 
1314 static int __init noresume_setup(char *str)
1315 {
1316 	noresume = 1;
1317 	return 1;
1318 }
1319 
1320 static int __init resumewait_setup(char *str)
1321 {
1322 	resume_wait = 1;
1323 	return 1;
1324 }
1325 
1326 static int __init resumedelay_setup(char *str)
1327 {
1328 	int rc = kstrtouint(str, 0, &resume_delay);
1329 
1330 	if (rc)
1331 		return rc;
1332 	return 1;
1333 }
1334 
1335 static int __init nohibernate_setup(char *str)
1336 {
1337 	noresume = 1;
1338 	nohibernate = 1;
1339 	return 1;
1340 }
1341 
1342 __setup("noresume", noresume_setup);
1343 __setup("resume_offset=", resume_offset_setup);
1344 __setup("resume=", resume_setup);
1345 __setup("hibernate=", hibernate_setup);
1346 __setup("resumewait", resumewait_setup);
1347 __setup("resumedelay=", resumedelay_setup);
1348 __setup("nohibernate", nohibernate_setup);
1349