xref: /openbmc/linux/kernel/power/hibernate.c (revision 22d55f02)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
4  *
5  * Copyright (c) 2003 Patrick Mochel
6  * Copyright (c) 2003 Open Source Development Lab
7  * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
8  * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
9  * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
10  */
11 
12 #define pr_fmt(fmt) "PM: " fmt
13 
14 #include <linux/export.h>
15 #include <linux/suspend.h>
16 #include <linux/reboot.h>
17 #include <linux/string.h>
18 #include <linux/device.h>
19 #include <linux/async.h>
20 #include <linux/delay.h>
21 #include <linux/fs.h>
22 #include <linux/mount.h>
23 #include <linux/pm.h>
24 #include <linux/nmi.h>
25 #include <linux/console.h>
26 #include <linux/cpu.h>
27 #include <linux/freezer.h>
28 #include <linux/gfp.h>
29 #include <linux/syscore_ops.h>
30 #include <linux/ctype.h>
31 #include <linux/genhd.h>
32 #include <linux/ktime.h>
33 #include <trace/events/power.h>
34 
35 #include "power.h"
36 
37 
38 static int nocompress;
39 static int noresume;
40 static int nohibernate;
41 static int resume_wait;
42 static unsigned int resume_delay;
43 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
44 dev_t swsusp_resume_device;
45 sector_t swsusp_resume_block;
46 __visible int in_suspend __nosavedata;
47 
48 enum {
49 	HIBERNATION_INVALID,
50 	HIBERNATION_PLATFORM,
51 	HIBERNATION_SHUTDOWN,
52 	HIBERNATION_REBOOT,
53 #ifdef CONFIG_SUSPEND
54 	HIBERNATION_SUSPEND,
55 #endif
56 	HIBERNATION_TEST_RESUME,
57 	/* keep last */
58 	__HIBERNATION_AFTER_LAST
59 };
60 #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
61 #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
62 
63 static int hibernation_mode = HIBERNATION_SHUTDOWN;
64 
65 bool freezer_test_done;
66 
67 static const struct platform_hibernation_ops *hibernation_ops;
68 
69 bool hibernation_available(void)
70 {
71 	return (nohibernate == 0);
72 }
73 
74 /**
75  * hibernation_set_ops - Set the global hibernate operations.
76  * @ops: Hibernation operations to use in subsequent hibernation transitions.
77  */
78 void hibernation_set_ops(const struct platform_hibernation_ops *ops)
79 {
80 	if (ops && !(ops->begin && ops->end &&  ops->pre_snapshot
81 	    && ops->prepare && ops->finish && ops->enter && ops->pre_restore
82 	    && ops->restore_cleanup && ops->leave)) {
83 		WARN_ON(1);
84 		return;
85 	}
86 	lock_system_sleep();
87 	hibernation_ops = ops;
88 	if (ops)
89 		hibernation_mode = HIBERNATION_PLATFORM;
90 	else if (hibernation_mode == HIBERNATION_PLATFORM)
91 		hibernation_mode = HIBERNATION_SHUTDOWN;
92 
93 	unlock_system_sleep();
94 }
95 EXPORT_SYMBOL_GPL(hibernation_set_ops);
96 
97 static bool entering_platform_hibernation;
98 
99 bool system_entering_hibernation(void)
100 {
101 	return entering_platform_hibernation;
102 }
103 EXPORT_SYMBOL(system_entering_hibernation);
104 
105 #ifdef CONFIG_PM_DEBUG
106 static void hibernation_debug_sleep(void)
107 {
108 	pr_info("hibernation debug: Waiting for 5 seconds.\n");
109 	mdelay(5000);
110 }
111 
112 static int hibernation_test(int level)
113 {
114 	if (pm_test_level == level) {
115 		hibernation_debug_sleep();
116 		return 1;
117 	}
118 	return 0;
119 }
120 #else /* !CONFIG_PM_DEBUG */
121 static int hibernation_test(int level) { return 0; }
122 #endif /* !CONFIG_PM_DEBUG */
123 
124 /**
125  * platform_begin - Call platform to start hibernation.
126  * @platform_mode: Whether or not to use the platform driver.
127  */
128 static int platform_begin(int platform_mode)
129 {
130 	return (platform_mode && hibernation_ops) ?
131 		hibernation_ops->begin(PMSG_FREEZE) : 0;
132 }
133 
134 /**
135  * platform_end - Call platform to finish transition to the working state.
136  * @platform_mode: Whether or not to use the platform driver.
137  */
138 static void platform_end(int platform_mode)
139 {
140 	if (platform_mode && hibernation_ops)
141 		hibernation_ops->end();
142 }
143 
144 /**
145  * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
146  * @platform_mode: Whether or not to use the platform driver.
147  *
148  * Use the platform driver to prepare the system for creating a hibernate image,
149  * if so configured, and return an error code if that fails.
150  */
151 
152 static int platform_pre_snapshot(int platform_mode)
153 {
154 	return (platform_mode && hibernation_ops) ?
155 		hibernation_ops->pre_snapshot() : 0;
156 }
157 
158 /**
159  * platform_leave - Call platform to prepare a transition to the working state.
160  * @platform_mode: Whether or not to use the platform driver.
161  *
162  * Use the platform driver prepare to prepare the machine for switching to the
163  * normal mode of operation.
164  *
165  * This routine is called on one CPU with interrupts disabled.
166  */
167 static void platform_leave(int platform_mode)
168 {
169 	if (platform_mode && hibernation_ops)
170 		hibernation_ops->leave();
171 }
172 
173 /**
174  * platform_finish - Call platform to switch the system to the working state.
175  * @platform_mode: Whether or not to use the platform driver.
176  *
177  * Use the platform driver to switch the machine to the normal mode of
178  * operation.
179  *
180  * This routine must be called after platform_prepare().
181  */
182 static void platform_finish(int platform_mode)
183 {
184 	if (platform_mode && hibernation_ops)
185 		hibernation_ops->finish();
186 }
187 
188 /**
189  * platform_pre_restore - Prepare for hibernate image restoration.
190  * @platform_mode: Whether or not to use the platform driver.
191  *
192  * Use the platform driver to prepare the system for resume from a hibernation
193  * image.
194  *
195  * If the restore fails after this function has been called,
196  * platform_restore_cleanup() must be called.
197  */
198 static int platform_pre_restore(int platform_mode)
199 {
200 	return (platform_mode && hibernation_ops) ?
201 		hibernation_ops->pre_restore() : 0;
202 }
203 
204 /**
205  * platform_restore_cleanup - Switch to the working state after failing restore.
206  * @platform_mode: Whether or not to use the platform driver.
207  *
208  * Use the platform driver to switch the system to the normal mode of operation
209  * after a failing restore.
210  *
211  * If platform_pre_restore() has been called before the failing restore, this
212  * function must be called too, regardless of the result of
213  * platform_pre_restore().
214  */
215 static void platform_restore_cleanup(int platform_mode)
216 {
217 	if (platform_mode && hibernation_ops)
218 		hibernation_ops->restore_cleanup();
219 }
220 
221 /**
222  * platform_recover - Recover from a failure to suspend devices.
223  * @platform_mode: Whether or not to use the platform driver.
224  */
225 static void platform_recover(int platform_mode)
226 {
227 	if (platform_mode && hibernation_ops && hibernation_ops->recover)
228 		hibernation_ops->recover();
229 }
230 
231 /**
232  * swsusp_show_speed - Print time elapsed between two events during hibernation.
233  * @start: Starting event.
234  * @stop: Final event.
235  * @nr_pages: Number of memory pages processed between @start and @stop.
236  * @msg: Additional diagnostic message to print.
237  */
238 void swsusp_show_speed(ktime_t start, ktime_t stop,
239 		      unsigned nr_pages, char *msg)
240 {
241 	ktime_t diff;
242 	u64 elapsed_centisecs64;
243 	unsigned int centisecs;
244 	unsigned int k;
245 	unsigned int kps;
246 
247 	diff = ktime_sub(stop, start);
248 	elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
249 	centisecs = elapsed_centisecs64;
250 	if (centisecs == 0)
251 		centisecs = 1;	/* avoid div-by-zero */
252 	k = nr_pages * (PAGE_SIZE / 1024);
253 	kps = (k * 100) / centisecs;
254 	pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
255 		msg, k, centisecs / 100, centisecs % 100, kps / 1000,
256 		(kps % 1000) / 10);
257 }
258 
259 __weak int arch_resume_nosmt(void)
260 {
261 	return 0;
262 }
263 
264 /**
265  * create_image - Create a hibernation image.
266  * @platform_mode: Whether or not to use the platform driver.
267  *
268  * Execute device drivers' "late" and "noirq" freeze callbacks, create a
269  * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
270  *
271  * Control reappears in this routine after the subsequent restore.
272  */
273 static int create_image(int platform_mode)
274 {
275 	int error;
276 
277 	error = dpm_suspend_end(PMSG_FREEZE);
278 	if (error) {
279 		pr_err("Some devices failed to power down, aborting hibernation\n");
280 		return error;
281 	}
282 
283 	error = platform_pre_snapshot(platform_mode);
284 	if (error || hibernation_test(TEST_PLATFORM))
285 		goto Platform_finish;
286 
287 	error = suspend_disable_secondary_cpus();
288 	if (error || hibernation_test(TEST_CPUS))
289 		goto Enable_cpus;
290 
291 	local_irq_disable();
292 
293 	system_state = SYSTEM_SUSPEND;
294 
295 	error = syscore_suspend();
296 	if (error) {
297 		pr_err("Some system devices failed to power down, aborting hibernation\n");
298 		goto Enable_irqs;
299 	}
300 
301 	if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
302 		goto Power_up;
303 
304 	in_suspend = 1;
305 	save_processor_state();
306 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
307 	error = swsusp_arch_suspend();
308 	/* Restore control flow magically appears here */
309 	restore_processor_state();
310 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
311 	if (error)
312 		pr_err("Error %d creating hibernation image\n", error);
313 
314 	if (!in_suspend) {
315 		events_check_enabled = false;
316 		clear_free_pages();
317 	}
318 
319 	platform_leave(platform_mode);
320 
321  Power_up:
322 	syscore_resume();
323 
324  Enable_irqs:
325 	system_state = SYSTEM_RUNNING;
326 	local_irq_enable();
327 
328  Enable_cpus:
329 	suspend_enable_secondary_cpus();
330 
331 	/* Allow architectures to do nosmt-specific post-resume dances */
332 	if (!in_suspend)
333 		error = arch_resume_nosmt();
334 
335  Platform_finish:
336 	platform_finish(platform_mode);
337 
338 	dpm_resume_start(in_suspend ?
339 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
340 
341 	return error;
342 }
343 
344 /**
345  * hibernation_snapshot - Quiesce devices and create a hibernation image.
346  * @platform_mode: If set, use platform driver to prepare for the transition.
347  *
348  * This routine must be called with system_transition_mutex held.
349  */
350 int hibernation_snapshot(int platform_mode)
351 {
352 	pm_message_t msg;
353 	int error;
354 
355 	pm_suspend_clear_flags();
356 	error = platform_begin(platform_mode);
357 	if (error)
358 		goto Close;
359 
360 	/* Preallocate image memory before shutting down devices. */
361 	error = hibernate_preallocate_memory();
362 	if (error)
363 		goto Close;
364 
365 	error = freeze_kernel_threads();
366 	if (error)
367 		goto Cleanup;
368 
369 	if (hibernation_test(TEST_FREEZER)) {
370 
371 		/*
372 		 * Indicate to the caller that we are returning due to a
373 		 * successful freezer test.
374 		 */
375 		freezer_test_done = true;
376 		goto Thaw;
377 	}
378 
379 	error = dpm_prepare(PMSG_FREEZE);
380 	if (error) {
381 		dpm_complete(PMSG_RECOVER);
382 		goto Thaw;
383 	}
384 
385 	suspend_console();
386 	pm_restrict_gfp_mask();
387 
388 	error = dpm_suspend(PMSG_FREEZE);
389 
390 	if (error || hibernation_test(TEST_DEVICES))
391 		platform_recover(platform_mode);
392 	else
393 		error = create_image(platform_mode);
394 
395 	/*
396 	 * In the case that we call create_image() above, the control
397 	 * returns here (1) after the image has been created or the
398 	 * image creation has failed and (2) after a successful restore.
399 	 */
400 
401 	/* We may need to release the preallocated image pages here. */
402 	if (error || !in_suspend)
403 		swsusp_free();
404 
405 	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
406 	dpm_resume(msg);
407 
408 	if (error || !in_suspend)
409 		pm_restore_gfp_mask();
410 
411 	resume_console();
412 	dpm_complete(msg);
413 
414  Close:
415 	platform_end(platform_mode);
416 	return error;
417 
418  Thaw:
419 	thaw_kernel_threads();
420  Cleanup:
421 	swsusp_free();
422 	goto Close;
423 }
424 
425 int __weak hibernate_resume_nonboot_cpu_disable(void)
426 {
427 	return suspend_disable_secondary_cpus();
428 }
429 
430 /**
431  * resume_target_kernel - Restore system state from a hibernation image.
432  * @platform_mode: Whether or not to use the platform driver.
433  *
434  * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
435  * contents of highmem that have not been restored yet from the image and run
436  * the low-level code that will restore the remaining contents of memory and
437  * switch to the just restored target kernel.
438  */
439 static int resume_target_kernel(bool platform_mode)
440 {
441 	int error;
442 
443 	error = dpm_suspend_end(PMSG_QUIESCE);
444 	if (error) {
445 		pr_err("Some devices failed to power down, aborting resume\n");
446 		return error;
447 	}
448 
449 	error = platform_pre_restore(platform_mode);
450 	if (error)
451 		goto Cleanup;
452 
453 	error = hibernate_resume_nonboot_cpu_disable();
454 	if (error)
455 		goto Enable_cpus;
456 
457 	local_irq_disable();
458 	system_state = SYSTEM_SUSPEND;
459 
460 	error = syscore_suspend();
461 	if (error)
462 		goto Enable_irqs;
463 
464 	save_processor_state();
465 	error = restore_highmem();
466 	if (!error) {
467 		error = swsusp_arch_resume();
468 		/*
469 		 * The code below is only ever reached in case of a failure.
470 		 * Otherwise, execution continues at the place where
471 		 * swsusp_arch_suspend() was called.
472 		 */
473 		BUG_ON(!error);
474 		/*
475 		 * This call to restore_highmem() reverts the changes made by
476 		 * the previous one.
477 		 */
478 		restore_highmem();
479 	}
480 	/*
481 	 * The only reason why swsusp_arch_resume() can fail is memory being
482 	 * very tight, so we have to free it as soon as we can to avoid
483 	 * subsequent failures.
484 	 */
485 	swsusp_free();
486 	restore_processor_state();
487 	touch_softlockup_watchdog();
488 
489 	syscore_resume();
490 
491  Enable_irqs:
492 	system_state = SYSTEM_RUNNING;
493 	local_irq_enable();
494 
495  Enable_cpus:
496 	suspend_enable_secondary_cpus();
497 
498  Cleanup:
499 	platform_restore_cleanup(platform_mode);
500 
501 	dpm_resume_start(PMSG_RECOVER);
502 
503 	return error;
504 }
505 
506 /**
507  * hibernation_restore - Quiesce devices and restore from a hibernation image.
508  * @platform_mode: If set, use platform driver to prepare for the transition.
509  *
510  * This routine must be called with system_transition_mutex held.  If it is
511  * successful, control reappears in the restored target kernel in
512  * hibernation_snapshot().
513  */
514 int hibernation_restore(int platform_mode)
515 {
516 	int error;
517 
518 	pm_prepare_console();
519 	suspend_console();
520 	pm_restrict_gfp_mask();
521 	error = dpm_suspend_start(PMSG_QUIESCE);
522 	if (!error) {
523 		error = resume_target_kernel(platform_mode);
524 		/*
525 		 * The above should either succeed and jump to the new kernel,
526 		 * or return with an error. Otherwise things are just
527 		 * undefined, so let's be paranoid.
528 		 */
529 		BUG_ON(!error);
530 	}
531 	dpm_resume_end(PMSG_RECOVER);
532 	pm_restore_gfp_mask();
533 	resume_console();
534 	pm_restore_console();
535 	return error;
536 }
537 
538 /**
539  * hibernation_platform_enter - Power off the system using the platform driver.
540  */
541 int hibernation_platform_enter(void)
542 {
543 	int error;
544 
545 	if (!hibernation_ops)
546 		return -ENOSYS;
547 
548 	/*
549 	 * We have cancelled the power transition by running
550 	 * hibernation_ops->finish() before saving the image, so we should let
551 	 * the firmware know that we're going to enter the sleep state after all
552 	 */
553 	error = hibernation_ops->begin(PMSG_HIBERNATE);
554 	if (error)
555 		goto Close;
556 
557 	entering_platform_hibernation = true;
558 	suspend_console();
559 	error = dpm_suspend_start(PMSG_HIBERNATE);
560 	if (error) {
561 		if (hibernation_ops->recover)
562 			hibernation_ops->recover();
563 		goto Resume_devices;
564 	}
565 
566 	error = dpm_suspend_end(PMSG_HIBERNATE);
567 	if (error)
568 		goto Resume_devices;
569 
570 	error = hibernation_ops->prepare();
571 	if (error)
572 		goto Platform_finish;
573 
574 	error = suspend_disable_secondary_cpus();
575 	if (error)
576 		goto Enable_cpus;
577 
578 	local_irq_disable();
579 	system_state = SYSTEM_SUSPEND;
580 	syscore_suspend();
581 	if (pm_wakeup_pending()) {
582 		error = -EAGAIN;
583 		goto Power_up;
584 	}
585 
586 	hibernation_ops->enter();
587 	/* We should never get here */
588 	while (1);
589 
590  Power_up:
591 	syscore_resume();
592 	system_state = SYSTEM_RUNNING;
593 	local_irq_enable();
594 
595  Enable_cpus:
596 	suspend_enable_secondary_cpus();
597 
598  Platform_finish:
599 	hibernation_ops->finish();
600 
601 	dpm_resume_start(PMSG_RESTORE);
602 
603  Resume_devices:
604 	entering_platform_hibernation = false;
605 	dpm_resume_end(PMSG_RESTORE);
606 	resume_console();
607 
608  Close:
609 	hibernation_ops->end();
610 
611 	return error;
612 }
613 
614 /**
615  * power_down - Shut the machine down for hibernation.
616  *
617  * Use the platform driver, if configured, to put the system into the sleep
618  * state corresponding to hibernation, or try to power it off or reboot,
619  * depending on the value of hibernation_mode.
620  */
621 static void power_down(void)
622 {
623 #ifdef CONFIG_SUSPEND
624 	int error;
625 
626 	if (hibernation_mode == HIBERNATION_SUSPEND) {
627 		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
628 		if (error) {
629 			hibernation_mode = hibernation_ops ?
630 						HIBERNATION_PLATFORM :
631 						HIBERNATION_SHUTDOWN;
632 		} else {
633 			/* Restore swap signature. */
634 			error = swsusp_unmark();
635 			if (error)
636 				pr_err("Swap will be unusable! Try swapon -a.\n");
637 
638 			return;
639 		}
640 	}
641 #endif
642 
643 	switch (hibernation_mode) {
644 	case HIBERNATION_REBOOT:
645 		kernel_restart(NULL);
646 		break;
647 	case HIBERNATION_PLATFORM:
648 		hibernation_platform_enter();
649 		/* Fall through */
650 	case HIBERNATION_SHUTDOWN:
651 		if (pm_power_off)
652 			kernel_power_off();
653 		break;
654 	}
655 	kernel_halt();
656 	/*
657 	 * Valid image is on the disk, if we continue we risk serious data
658 	 * corruption after resume.
659 	 */
660 	pr_crit("Power down manually\n");
661 	while (1)
662 		cpu_relax();
663 }
664 
665 static int load_image_and_restore(void)
666 {
667 	int error;
668 	unsigned int flags;
669 
670 	pm_pr_dbg("Loading hibernation image.\n");
671 
672 	lock_device_hotplug();
673 	error = create_basic_memory_bitmaps();
674 	if (error)
675 		goto Unlock;
676 
677 	error = swsusp_read(&flags);
678 	swsusp_close(FMODE_READ);
679 	if (!error)
680 		hibernation_restore(flags & SF_PLATFORM_MODE);
681 
682 	pr_err("Failed to load hibernation image, recovering.\n");
683 	swsusp_free();
684 	free_basic_memory_bitmaps();
685  Unlock:
686 	unlock_device_hotplug();
687 
688 	return error;
689 }
690 
691 /**
692  * hibernate - Carry out system hibernation, including saving the image.
693  */
694 int hibernate(void)
695 {
696 	int error, nr_calls = 0;
697 	bool snapshot_test = false;
698 
699 	if (!hibernation_available()) {
700 		pm_pr_dbg("Hibernation not available.\n");
701 		return -EPERM;
702 	}
703 
704 	lock_system_sleep();
705 	/* The snapshot device should not be opened while we're running */
706 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
707 		error = -EBUSY;
708 		goto Unlock;
709 	}
710 
711 	pr_info("hibernation entry\n");
712 	pm_prepare_console();
713 	error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls);
714 	if (error) {
715 		nr_calls--;
716 		goto Exit;
717 	}
718 
719 	ksys_sync_helper();
720 
721 	error = freeze_processes();
722 	if (error)
723 		goto Exit;
724 
725 	lock_device_hotplug();
726 	/* Allocate memory management structures */
727 	error = create_basic_memory_bitmaps();
728 	if (error)
729 		goto Thaw;
730 
731 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
732 	if (error || freezer_test_done)
733 		goto Free_bitmaps;
734 
735 	if (in_suspend) {
736 		unsigned int flags = 0;
737 
738 		if (hibernation_mode == HIBERNATION_PLATFORM)
739 			flags |= SF_PLATFORM_MODE;
740 		if (nocompress)
741 			flags |= SF_NOCOMPRESS_MODE;
742 		else
743 		        flags |= SF_CRC32_MODE;
744 
745 		pm_pr_dbg("Writing image.\n");
746 		error = swsusp_write(flags);
747 		swsusp_free();
748 		if (!error) {
749 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
750 				snapshot_test = true;
751 			else
752 				power_down();
753 		}
754 		in_suspend = 0;
755 		pm_restore_gfp_mask();
756 	} else {
757 		pm_pr_dbg("Image restored successfully.\n");
758 	}
759 
760  Free_bitmaps:
761 	free_basic_memory_bitmaps();
762  Thaw:
763 	unlock_device_hotplug();
764 	if (snapshot_test) {
765 		pm_pr_dbg("Checking hibernation image\n");
766 		error = swsusp_check();
767 		if (!error)
768 			error = load_image_and_restore();
769 	}
770 	thaw_processes();
771 
772 	/* Don't bother checking whether freezer_test_done is true */
773 	freezer_test_done = false;
774  Exit:
775 	__pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
776 	pm_restore_console();
777 	atomic_inc(&snapshot_device_available);
778  Unlock:
779 	unlock_system_sleep();
780 	pr_info("hibernation exit\n");
781 
782 	return error;
783 }
784 
785 
786 /**
787  * software_resume - Resume from a saved hibernation image.
788  *
789  * This routine is called as a late initcall, when all devices have been
790  * discovered and initialized already.
791  *
792  * The image reading code is called to see if there is a hibernation image
793  * available for reading.  If that is the case, devices are quiesced and the
794  * contents of memory is restored from the saved image.
795  *
796  * If this is successful, control reappears in the restored target kernel in
797  * hibernation_snapshot() which returns to hibernate().  Otherwise, the routine
798  * attempts to recover gracefully and make the kernel return to the normal mode
799  * of operation.
800  */
801 static int software_resume(void)
802 {
803 	int error, nr_calls = 0;
804 
805 	/*
806 	 * If the user said "noresume".. bail out early.
807 	 */
808 	if (noresume || !hibernation_available())
809 		return 0;
810 
811 	/*
812 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
813 	 * is configured into the kernel. Since the regular hibernate
814 	 * trigger path is via sysfs which takes a buffer mutex before
815 	 * calling hibernate functions (which take system_transition_mutex)
816 	 * this can cause lockdep to complain about a possible ABBA deadlock
817 	 * which cannot happen since we're in the boot code here and
818 	 * sysfs can't be invoked yet. Therefore, we use a subclass
819 	 * here to avoid lockdep complaining.
820 	 */
821 	mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
822 
823 	if (swsusp_resume_device)
824 		goto Check_image;
825 
826 	if (!strlen(resume_file)) {
827 		error = -ENOENT;
828 		goto Unlock;
829 	}
830 
831 	pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
832 
833 	if (resume_delay) {
834 		pr_info("Waiting %dsec before reading resume device ...\n",
835 			resume_delay);
836 		ssleep(resume_delay);
837 	}
838 
839 	/* Check if the device is there */
840 	swsusp_resume_device = name_to_dev_t(resume_file);
841 
842 	/*
843 	 * name_to_dev_t is ineffective to verify parition if resume_file is in
844 	 * integer format. (e.g. major:minor)
845 	 */
846 	if (isdigit(resume_file[0]) && resume_wait) {
847 		int partno;
848 		while (!get_gendisk(swsusp_resume_device, &partno))
849 			msleep(10);
850 	}
851 
852 	if (!swsusp_resume_device) {
853 		/*
854 		 * Some device discovery might still be in progress; we need
855 		 * to wait for this to finish.
856 		 */
857 		wait_for_device_probe();
858 
859 		if (resume_wait) {
860 			while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
861 				msleep(10);
862 			async_synchronize_full();
863 		}
864 
865 		swsusp_resume_device = name_to_dev_t(resume_file);
866 		if (!swsusp_resume_device) {
867 			error = -ENODEV;
868 			goto Unlock;
869 		}
870 	}
871 
872  Check_image:
873 	pm_pr_dbg("Hibernation image partition %d:%d present\n",
874 		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
875 
876 	pm_pr_dbg("Looking for hibernation image.\n");
877 	error = swsusp_check();
878 	if (error)
879 		goto Unlock;
880 
881 	/* The snapshot device should not be opened while we're running */
882 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
883 		error = -EBUSY;
884 		swsusp_close(FMODE_READ);
885 		goto Unlock;
886 	}
887 
888 	pr_info("resume from hibernation\n");
889 	pm_prepare_console();
890 	error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
891 	if (error) {
892 		nr_calls--;
893 		goto Close_Finish;
894 	}
895 
896 	pm_pr_dbg("Preparing processes for restore.\n");
897 	error = freeze_processes();
898 	if (error)
899 		goto Close_Finish;
900 	error = load_image_and_restore();
901 	thaw_processes();
902  Finish:
903 	__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
904 	pm_restore_console();
905 	pr_info("resume from hibernation failed (%d)\n", error);
906 	atomic_inc(&snapshot_device_available);
907 	/* For success case, the suspend path will release the lock */
908  Unlock:
909 	mutex_unlock(&system_transition_mutex);
910 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
911 	return error;
912  Close_Finish:
913 	swsusp_close(FMODE_READ);
914 	goto Finish;
915 }
916 
917 late_initcall_sync(software_resume);
918 
919 
920 static const char * const hibernation_modes[] = {
921 	[HIBERNATION_PLATFORM]	= "platform",
922 	[HIBERNATION_SHUTDOWN]	= "shutdown",
923 	[HIBERNATION_REBOOT]	= "reboot",
924 #ifdef CONFIG_SUSPEND
925 	[HIBERNATION_SUSPEND]	= "suspend",
926 #endif
927 	[HIBERNATION_TEST_RESUME]	= "test_resume",
928 };
929 
930 /*
931  * /sys/power/disk - Control hibernation mode.
932  *
933  * Hibernation can be handled in several ways.  There are a few different ways
934  * to put the system into the sleep state: using the platform driver (e.g. ACPI
935  * or other hibernation_ops), powering it off or rebooting it (for testing
936  * mostly).
937  *
938  * The sysfs file /sys/power/disk provides an interface for selecting the
939  * hibernation mode to use.  Reading from this file causes the available modes
940  * to be printed.  There are 3 modes that can be supported:
941  *
942  *	'platform'
943  *	'shutdown'
944  *	'reboot'
945  *
946  * If a platform hibernation driver is in use, 'platform' will be supported
947  * and will be used by default.  Otherwise, 'shutdown' will be used by default.
948  * The selected option (i.e. the one corresponding to the current value of
949  * hibernation_mode) is enclosed by a square bracket.
950  *
951  * To select a given hibernation mode it is necessary to write the mode's
952  * string representation (as returned by reading from /sys/power/disk) back
953  * into /sys/power/disk.
954  */
955 
956 static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
957 			 char *buf)
958 {
959 	int i;
960 	char *start = buf;
961 
962 	if (!hibernation_available())
963 		return sprintf(buf, "[disabled]\n");
964 
965 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
966 		if (!hibernation_modes[i])
967 			continue;
968 		switch (i) {
969 		case HIBERNATION_SHUTDOWN:
970 		case HIBERNATION_REBOOT:
971 #ifdef CONFIG_SUSPEND
972 		case HIBERNATION_SUSPEND:
973 #endif
974 		case HIBERNATION_TEST_RESUME:
975 			break;
976 		case HIBERNATION_PLATFORM:
977 			if (hibernation_ops)
978 				break;
979 			/* not a valid mode, continue with loop */
980 			continue;
981 		}
982 		if (i == hibernation_mode)
983 			buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
984 		else
985 			buf += sprintf(buf, "%s ", hibernation_modes[i]);
986 	}
987 	buf += sprintf(buf, "\n");
988 	return buf-start;
989 }
990 
991 static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
992 			  const char *buf, size_t n)
993 {
994 	int error = 0;
995 	int i;
996 	int len;
997 	char *p;
998 	int mode = HIBERNATION_INVALID;
999 
1000 	if (!hibernation_available())
1001 		return -EPERM;
1002 
1003 	p = memchr(buf, '\n', n);
1004 	len = p ? p - buf : n;
1005 
1006 	lock_system_sleep();
1007 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1008 		if (len == strlen(hibernation_modes[i])
1009 		    && !strncmp(buf, hibernation_modes[i], len)) {
1010 			mode = i;
1011 			break;
1012 		}
1013 	}
1014 	if (mode != HIBERNATION_INVALID) {
1015 		switch (mode) {
1016 		case HIBERNATION_SHUTDOWN:
1017 		case HIBERNATION_REBOOT:
1018 #ifdef CONFIG_SUSPEND
1019 		case HIBERNATION_SUSPEND:
1020 #endif
1021 		case HIBERNATION_TEST_RESUME:
1022 			hibernation_mode = mode;
1023 			break;
1024 		case HIBERNATION_PLATFORM:
1025 			if (hibernation_ops)
1026 				hibernation_mode = mode;
1027 			else
1028 				error = -EINVAL;
1029 		}
1030 	} else
1031 		error = -EINVAL;
1032 
1033 	if (!error)
1034 		pm_pr_dbg("Hibernation mode set to '%s'\n",
1035 			       hibernation_modes[mode]);
1036 	unlock_system_sleep();
1037 	return error ? error : n;
1038 }
1039 
1040 power_attr(disk);
1041 
1042 static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1043 			   char *buf)
1044 {
1045 	return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
1046 		       MINOR(swsusp_resume_device));
1047 }
1048 
1049 static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1050 			    const char *buf, size_t n)
1051 {
1052 	dev_t res;
1053 	int len = n;
1054 	char *name;
1055 
1056 	if (len && buf[len-1] == '\n')
1057 		len--;
1058 	name = kstrndup(buf, len, GFP_KERNEL);
1059 	if (!name)
1060 		return -ENOMEM;
1061 
1062 	res = name_to_dev_t(name);
1063 	kfree(name);
1064 	if (!res)
1065 		return -EINVAL;
1066 
1067 	lock_system_sleep();
1068 	swsusp_resume_device = res;
1069 	unlock_system_sleep();
1070 	pm_pr_dbg("Configured resume from disk to %u\n", swsusp_resume_device);
1071 	noresume = 0;
1072 	software_resume();
1073 	return n;
1074 }
1075 
1076 power_attr(resume);
1077 
1078 static ssize_t resume_offset_show(struct kobject *kobj,
1079 				  struct kobj_attribute *attr, char *buf)
1080 {
1081 	return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
1082 }
1083 
1084 static ssize_t resume_offset_store(struct kobject *kobj,
1085 				   struct kobj_attribute *attr, const char *buf,
1086 				   size_t n)
1087 {
1088 	unsigned long long offset;
1089 	int rc;
1090 
1091 	rc = kstrtoull(buf, 0, &offset);
1092 	if (rc)
1093 		return rc;
1094 	swsusp_resume_block = offset;
1095 
1096 	return n;
1097 }
1098 
1099 power_attr(resume_offset);
1100 
1101 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1102 			       char *buf)
1103 {
1104 	return sprintf(buf, "%lu\n", image_size);
1105 }
1106 
1107 static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1108 				const char *buf, size_t n)
1109 {
1110 	unsigned long size;
1111 
1112 	if (sscanf(buf, "%lu", &size) == 1) {
1113 		image_size = size;
1114 		return n;
1115 	}
1116 
1117 	return -EINVAL;
1118 }
1119 
1120 power_attr(image_size);
1121 
1122 static ssize_t reserved_size_show(struct kobject *kobj,
1123 				  struct kobj_attribute *attr, char *buf)
1124 {
1125 	return sprintf(buf, "%lu\n", reserved_size);
1126 }
1127 
1128 static ssize_t reserved_size_store(struct kobject *kobj,
1129 				   struct kobj_attribute *attr,
1130 				   const char *buf, size_t n)
1131 {
1132 	unsigned long size;
1133 
1134 	if (sscanf(buf, "%lu", &size) == 1) {
1135 		reserved_size = size;
1136 		return n;
1137 	}
1138 
1139 	return -EINVAL;
1140 }
1141 
1142 power_attr(reserved_size);
1143 
1144 static struct attribute * g[] = {
1145 	&disk_attr.attr,
1146 	&resume_offset_attr.attr,
1147 	&resume_attr.attr,
1148 	&image_size_attr.attr,
1149 	&reserved_size_attr.attr,
1150 	NULL,
1151 };
1152 
1153 
1154 static const struct attribute_group attr_group = {
1155 	.attrs = g,
1156 };
1157 
1158 
1159 static int __init pm_disk_init(void)
1160 {
1161 	return sysfs_create_group(power_kobj, &attr_group);
1162 }
1163 
1164 core_initcall(pm_disk_init);
1165 
1166 
1167 static int __init resume_setup(char *str)
1168 {
1169 	if (noresume)
1170 		return 1;
1171 
1172 	strncpy( resume_file, str, 255 );
1173 	return 1;
1174 }
1175 
1176 static int __init resume_offset_setup(char *str)
1177 {
1178 	unsigned long long offset;
1179 
1180 	if (noresume)
1181 		return 1;
1182 
1183 	if (sscanf(str, "%llu", &offset) == 1)
1184 		swsusp_resume_block = offset;
1185 
1186 	return 1;
1187 }
1188 
1189 static int __init hibernate_setup(char *str)
1190 {
1191 	if (!strncmp(str, "noresume", 8)) {
1192 		noresume = 1;
1193 	} else if (!strncmp(str, "nocompress", 10)) {
1194 		nocompress = 1;
1195 	} else if (!strncmp(str, "no", 2)) {
1196 		noresume = 1;
1197 		nohibernate = 1;
1198 	} else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1199 		   && !strncmp(str, "protect_image", 13)) {
1200 		enable_restore_image_protection();
1201 	}
1202 	return 1;
1203 }
1204 
1205 static int __init noresume_setup(char *str)
1206 {
1207 	noresume = 1;
1208 	return 1;
1209 }
1210 
1211 static int __init resumewait_setup(char *str)
1212 {
1213 	resume_wait = 1;
1214 	return 1;
1215 }
1216 
1217 static int __init resumedelay_setup(char *str)
1218 {
1219 	int rc = kstrtouint(str, 0, &resume_delay);
1220 
1221 	if (rc)
1222 		return rc;
1223 	return 1;
1224 }
1225 
1226 static int __init nohibernate_setup(char *str)
1227 {
1228 	noresume = 1;
1229 	nohibernate = 1;
1230 	return 1;
1231 }
1232 
1233 __setup("noresume", noresume_setup);
1234 __setup("resume_offset=", resume_offset_setup);
1235 __setup("resume=", resume_setup);
1236 __setup("hibernate=", hibernate_setup);
1237 __setup("resumewait", resumewait_setup);
1238 __setup("resumedelay=", resumedelay_setup);
1239 __setup("nohibernate", nohibernate_setup);
1240