xref: /openbmc/linux/kernel/power/hibernate.c (revision 06b72824)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
4  *
5  * Copyright (c) 2003 Patrick Mochel
6  * Copyright (c) 2003 Open Source Development Lab
7  * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
8  * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
9  * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
10  */
11 
12 #define pr_fmt(fmt) "PM: hibernation: " fmt
13 
14 #include <linux/export.h>
15 #include <linux/suspend.h>
16 #include <linux/reboot.h>
17 #include <linux/string.h>
18 #include <linux/device.h>
19 #include <linux/async.h>
20 #include <linux/delay.h>
21 #include <linux/fs.h>
22 #include <linux/mount.h>
23 #include <linux/pm.h>
24 #include <linux/nmi.h>
25 #include <linux/console.h>
26 #include <linux/cpu.h>
27 #include <linux/freezer.h>
28 #include <linux/gfp.h>
29 #include <linux/syscore_ops.h>
30 #include <linux/ctype.h>
31 #include <linux/genhd.h>
32 #include <linux/ktime.h>
33 #include <linux/security.h>
34 #include <trace/events/power.h>
35 
36 #include "power.h"
37 
38 
39 static int nocompress;
40 static int noresume;
41 static int nohibernate;
42 static int resume_wait;
43 static unsigned int resume_delay;
44 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
45 dev_t swsusp_resume_device;
46 sector_t swsusp_resume_block;
47 __visible int in_suspend __nosavedata;
48 
49 enum {
50 	HIBERNATION_INVALID,
51 	HIBERNATION_PLATFORM,
52 	HIBERNATION_SHUTDOWN,
53 	HIBERNATION_REBOOT,
54 #ifdef CONFIG_SUSPEND
55 	HIBERNATION_SUSPEND,
56 #endif
57 	HIBERNATION_TEST_RESUME,
58 	/* keep last */
59 	__HIBERNATION_AFTER_LAST
60 };
61 #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
62 #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
63 
64 static int hibernation_mode = HIBERNATION_SHUTDOWN;
65 
66 bool freezer_test_done;
67 
68 static const struct platform_hibernation_ops *hibernation_ops;
69 
70 bool hibernation_available(void)
71 {
72 	return nohibernate == 0 && !security_locked_down(LOCKDOWN_HIBERNATION);
73 }
74 
75 /**
76  * hibernation_set_ops - Set the global hibernate operations.
77  * @ops: Hibernation operations to use in subsequent hibernation transitions.
78  */
79 void hibernation_set_ops(const struct platform_hibernation_ops *ops)
80 {
81 	if (ops && !(ops->begin && ops->end &&  ops->pre_snapshot
82 	    && ops->prepare && ops->finish && ops->enter && ops->pre_restore
83 	    && ops->restore_cleanup && ops->leave)) {
84 		WARN_ON(1);
85 		return;
86 	}
87 	lock_system_sleep();
88 	hibernation_ops = ops;
89 	if (ops)
90 		hibernation_mode = HIBERNATION_PLATFORM;
91 	else if (hibernation_mode == HIBERNATION_PLATFORM)
92 		hibernation_mode = HIBERNATION_SHUTDOWN;
93 
94 	unlock_system_sleep();
95 }
96 EXPORT_SYMBOL_GPL(hibernation_set_ops);
97 
98 static bool entering_platform_hibernation;
99 
100 bool system_entering_hibernation(void)
101 {
102 	return entering_platform_hibernation;
103 }
104 EXPORT_SYMBOL(system_entering_hibernation);
105 
106 #ifdef CONFIG_PM_DEBUG
107 static void hibernation_debug_sleep(void)
108 {
109 	pr_info("debug: Waiting for 5 seconds.\n");
110 	mdelay(5000);
111 }
112 
113 static int hibernation_test(int level)
114 {
115 	if (pm_test_level == level) {
116 		hibernation_debug_sleep();
117 		return 1;
118 	}
119 	return 0;
120 }
121 #else /* !CONFIG_PM_DEBUG */
122 static int hibernation_test(int level) { return 0; }
123 #endif /* !CONFIG_PM_DEBUG */
124 
125 /**
126  * platform_begin - Call platform to start hibernation.
127  * @platform_mode: Whether or not to use the platform driver.
128  */
129 static int platform_begin(int platform_mode)
130 {
131 	return (platform_mode && hibernation_ops) ?
132 		hibernation_ops->begin(PMSG_FREEZE) : 0;
133 }
134 
135 /**
136  * platform_end - Call platform to finish transition to the working state.
137  * @platform_mode: Whether or not to use the platform driver.
138  */
139 static void platform_end(int platform_mode)
140 {
141 	if (platform_mode && hibernation_ops)
142 		hibernation_ops->end();
143 }
144 
145 /**
146  * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
147  * @platform_mode: Whether or not to use the platform driver.
148  *
149  * Use the platform driver to prepare the system for creating a hibernate image,
150  * if so configured, and return an error code if that fails.
151  */
152 
153 static int platform_pre_snapshot(int platform_mode)
154 {
155 	return (platform_mode && hibernation_ops) ?
156 		hibernation_ops->pre_snapshot() : 0;
157 }
158 
159 /**
160  * platform_leave - Call platform to prepare a transition to the working state.
161  * @platform_mode: Whether or not to use the platform driver.
162  *
163  * Use the platform driver prepare to prepare the machine for switching to the
164  * normal mode of operation.
165  *
166  * This routine is called on one CPU with interrupts disabled.
167  */
168 static void platform_leave(int platform_mode)
169 {
170 	if (platform_mode && hibernation_ops)
171 		hibernation_ops->leave();
172 }
173 
174 /**
175  * platform_finish - Call platform to switch the system to the working state.
176  * @platform_mode: Whether or not to use the platform driver.
177  *
178  * Use the platform driver to switch the machine to the normal mode of
179  * operation.
180  *
181  * This routine must be called after platform_prepare().
182  */
183 static void platform_finish(int platform_mode)
184 {
185 	if (platform_mode && hibernation_ops)
186 		hibernation_ops->finish();
187 }
188 
189 /**
190  * platform_pre_restore - Prepare for hibernate image restoration.
191  * @platform_mode: Whether or not to use the platform driver.
192  *
193  * Use the platform driver to prepare the system for resume from a hibernation
194  * image.
195  *
196  * If the restore fails after this function has been called,
197  * platform_restore_cleanup() must be called.
198  */
199 static int platform_pre_restore(int platform_mode)
200 {
201 	return (platform_mode && hibernation_ops) ?
202 		hibernation_ops->pre_restore() : 0;
203 }
204 
205 /**
206  * platform_restore_cleanup - Switch to the working state after failing restore.
207  * @platform_mode: Whether or not to use the platform driver.
208  *
209  * Use the platform driver to switch the system to the normal mode of operation
210  * after a failing restore.
211  *
212  * If platform_pre_restore() has been called before the failing restore, this
213  * function must be called too, regardless of the result of
214  * platform_pre_restore().
215  */
216 static void platform_restore_cleanup(int platform_mode)
217 {
218 	if (platform_mode && hibernation_ops)
219 		hibernation_ops->restore_cleanup();
220 }
221 
222 /**
223  * platform_recover - Recover from a failure to suspend devices.
224  * @platform_mode: Whether or not to use the platform driver.
225  */
226 static void platform_recover(int platform_mode)
227 {
228 	if (platform_mode && hibernation_ops && hibernation_ops->recover)
229 		hibernation_ops->recover();
230 }
231 
232 /**
233  * swsusp_show_speed - Print time elapsed between two events during hibernation.
234  * @start: Starting event.
235  * @stop: Final event.
236  * @nr_pages: Number of memory pages processed between @start and @stop.
237  * @msg: Additional diagnostic message to print.
238  */
239 void swsusp_show_speed(ktime_t start, ktime_t stop,
240 		      unsigned nr_pages, char *msg)
241 {
242 	ktime_t diff;
243 	u64 elapsed_centisecs64;
244 	unsigned int centisecs;
245 	unsigned int k;
246 	unsigned int kps;
247 
248 	diff = ktime_sub(stop, start);
249 	elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
250 	centisecs = elapsed_centisecs64;
251 	if (centisecs == 0)
252 		centisecs = 1;	/* avoid div-by-zero */
253 	k = nr_pages * (PAGE_SIZE / 1024);
254 	kps = (k * 100) / centisecs;
255 	pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
256 		msg, k, centisecs / 100, centisecs % 100, kps / 1000,
257 		(kps % 1000) / 10);
258 }
259 
260 __weak int arch_resume_nosmt(void)
261 {
262 	return 0;
263 }
264 
265 /**
266  * create_image - Create a hibernation image.
267  * @platform_mode: Whether or not to use the platform driver.
268  *
269  * Execute device drivers' "late" and "noirq" freeze callbacks, create a
270  * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
271  *
272  * Control reappears in this routine after the subsequent restore.
273  */
274 static int create_image(int platform_mode)
275 {
276 	int error;
277 
278 	error = dpm_suspend_end(PMSG_FREEZE);
279 	if (error) {
280 		pr_err("Some devices failed to power down, aborting\n");
281 		return error;
282 	}
283 
284 	error = platform_pre_snapshot(platform_mode);
285 	if (error || hibernation_test(TEST_PLATFORM))
286 		goto Platform_finish;
287 
288 	error = suspend_disable_secondary_cpus();
289 	if (error || hibernation_test(TEST_CPUS))
290 		goto Enable_cpus;
291 
292 	local_irq_disable();
293 
294 	system_state = SYSTEM_SUSPEND;
295 
296 	error = syscore_suspend();
297 	if (error) {
298 		pr_err("Some system devices failed to power down, aborting\n");
299 		goto Enable_irqs;
300 	}
301 
302 	if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
303 		goto Power_up;
304 
305 	in_suspend = 1;
306 	save_processor_state();
307 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
308 	error = swsusp_arch_suspend();
309 	/* Restore control flow magically appears here */
310 	restore_processor_state();
311 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
312 	if (error)
313 		pr_err("Error %d creating image\n", error);
314 
315 	if (!in_suspend) {
316 		events_check_enabled = false;
317 		clear_free_pages();
318 	}
319 
320 	platform_leave(platform_mode);
321 
322  Power_up:
323 	syscore_resume();
324 
325  Enable_irqs:
326 	system_state = SYSTEM_RUNNING;
327 	local_irq_enable();
328 
329  Enable_cpus:
330 	suspend_enable_secondary_cpus();
331 
332 	/* Allow architectures to do nosmt-specific post-resume dances */
333 	if (!in_suspend)
334 		error = arch_resume_nosmt();
335 
336  Platform_finish:
337 	platform_finish(platform_mode);
338 
339 	dpm_resume_start(in_suspend ?
340 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
341 
342 	return error;
343 }
344 
345 /**
346  * hibernation_snapshot - Quiesce devices and create a hibernation image.
347  * @platform_mode: If set, use platform driver to prepare for the transition.
348  *
349  * This routine must be called with system_transition_mutex held.
350  */
351 int hibernation_snapshot(int platform_mode)
352 {
353 	pm_message_t msg;
354 	int error;
355 
356 	pm_suspend_clear_flags();
357 	error = platform_begin(platform_mode);
358 	if (error)
359 		goto Close;
360 
361 	/* Preallocate image memory before shutting down devices. */
362 	error = hibernate_preallocate_memory();
363 	if (error)
364 		goto Close;
365 
366 	error = freeze_kernel_threads();
367 	if (error)
368 		goto Cleanup;
369 
370 	if (hibernation_test(TEST_FREEZER)) {
371 
372 		/*
373 		 * Indicate to the caller that we are returning due to a
374 		 * successful freezer test.
375 		 */
376 		freezer_test_done = true;
377 		goto Thaw;
378 	}
379 
380 	error = dpm_prepare(PMSG_FREEZE);
381 	if (error) {
382 		dpm_complete(PMSG_RECOVER);
383 		goto Thaw;
384 	}
385 
386 	suspend_console();
387 	pm_restrict_gfp_mask();
388 
389 	error = dpm_suspend(PMSG_FREEZE);
390 
391 	if (error || hibernation_test(TEST_DEVICES))
392 		platform_recover(platform_mode);
393 	else
394 		error = create_image(platform_mode);
395 
396 	/*
397 	 * In the case that we call create_image() above, the control
398 	 * returns here (1) after the image has been created or the
399 	 * image creation has failed and (2) after a successful restore.
400 	 */
401 
402 	/* We may need to release the preallocated image pages here. */
403 	if (error || !in_suspend)
404 		swsusp_free();
405 
406 	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
407 	dpm_resume(msg);
408 
409 	if (error || !in_suspend)
410 		pm_restore_gfp_mask();
411 
412 	resume_console();
413 	dpm_complete(msg);
414 
415  Close:
416 	platform_end(platform_mode);
417 	return error;
418 
419  Thaw:
420 	thaw_kernel_threads();
421  Cleanup:
422 	swsusp_free();
423 	goto Close;
424 }
425 
426 int __weak hibernate_resume_nonboot_cpu_disable(void)
427 {
428 	return suspend_disable_secondary_cpus();
429 }
430 
431 /**
432  * resume_target_kernel - Restore system state from a hibernation image.
433  * @platform_mode: Whether or not to use the platform driver.
434  *
435  * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
436  * contents of highmem that have not been restored yet from the image and run
437  * the low-level code that will restore the remaining contents of memory and
438  * switch to the just restored target kernel.
439  */
440 static int resume_target_kernel(bool platform_mode)
441 {
442 	int error;
443 
444 	error = dpm_suspend_end(PMSG_QUIESCE);
445 	if (error) {
446 		pr_err("Some devices failed to power down, aborting resume\n");
447 		return error;
448 	}
449 
450 	error = platform_pre_restore(platform_mode);
451 	if (error)
452 		goto Cleanup;
453 
454 	error = hibernate_resume_nonboot_cpu_disable();
455 	if (error)
456 		goto Enable_cpus;
457 
458 	local_irq_disable();
459 	system_state = SYSTEM_SUSPEND;
460 
461 	error = syscore_suspend();
462 	if (error)
463 		goto Enable_irqs;
464 
465 	save_processor_state();
466 	error = restore_highmem();
467 	if (!error) {
468 		error = swsusp_arch_resume();
469 		/*
470 		 * The code below is only ever reached in case of a failure.
471 		 * Otherwise, execution continues at the place where
472 		 * swsusp_arch_suspend() was called.
473 		 */
474 		BUG_ON(!error);
475 		/*
476 		 * This call to restore_highmem() reverts the changes made by
477 		 * the previous one.
478 		 */
479 		restore_highmem();
480 	}
481 	/*
482 	 * The only reason why swsusp_arch_resume() can fail is memory being
483 	 * very tight, so we have to free it as soon as we can to avoid
484 	 * subsequent failures.
485 	 */
486 	swsusp_free();
487 	restore_processor_state();
488 	touch_softlockup_watchdog();
489 
490 	syscore_resume();
491 
492  Enable_irqs:
493 	system_state = SYSTEM_RUNNING;
494 	local_irq_enable();
495 
496  Enable_cpus:
497 	suspend_enable_secondary_cpus();
498 
499  Cleanup:
500 	platform_restore_cleanup(platform_mode);
501 
502 	dpm_resume_start(PMSG_RECOVER);
503 
504 	return error;
505 }
506 
507 /**
508  * hibernation_restore - Quiesce devices and restore from a hibernation image.
509  * @platform_mode: If set, use platform driver to prepare for the transition.
510  *
511  * This routine must be called with system_transition_mutex held.  If it is
512  * successful, control reappears in the restored target kernel in
513  * hibernation_snapshot().
514  */
515 int hibernation_restore(int platform_mode)
516 {
517 	int error;
518 
519 	pm_prepare_console();
520 	suspend_console();
521 	pm_restrict_gfp_mask();
522 	error = dpm_suspend_start(PMSG_QUIESCE);
523 	if (!error) {
524 		error = resume_target_kernel(platform_mode);
525 		/*
526 		 * The above should either succeed and jump to the new kernel,
527 		 * or return with an error. Otherwise things are just
528 		 * undefined, so let's be paranoid.
529 		 */
530 		BUG_ON(!error);
531 	}
532 	dpm_resume_end(PMSG_RECOVER);
533 	pm_restore_gfp_mask();
534 	resume_console();
535 	pm_restore_console();
536 	return error;
537 }
538 
539 /**
540  * hibernation_platform_enter - Power off the system using the platform driver.
541  */
542 int hibernation_platform_enter(void)
543 {
544 	int error;
545 
546 	if (!hibernation_ops)
547 		return -ENOSYS;
548 
549 	/*
550 	 * We have cancelled the power transition by running
551 	 * hibernation_ops->finish() before saving the image, so we should let
552 	 * the firmware know that we're going to enter the sleep state after all
553 	 */
554 	error = hibernation_ops->begin(PMSG_HIBERNATE);
555 	if (error)
556 		goto Close;
557 
558 	entering_platform_hibernation = true;
559 	suspend_console();
560 	error = dpm_suspend_start(PMSG_HIBERNATE);
561 	if (error) {
562 		if (hibernation_ops->recover)
563 			hibernation_ops->recover();
564 		goto Resume_devices;
565 	}
566 
567 	error = dpm_suspend_end(PMSG_HIBERNATE);
568 	if (error)
569 		goto Resume_devices;
570 
571 	error = hibernation_ops->prepare();
572 	if (error)
573 		goto Platform_finish;
574 
575 	error = suspend_disable_secondary_cpus();
576 	if (error)
577 		goto Enable_cpus;
578 
579 	local_irq_disable();
580 	system_state = SYSTEM_SUSPEND;
581 	syscore_suspend();
582 	if (pm_wakeup_pending()) {
583 		error = -EAGAIN;
584 		goto Power_up;
585 	}
586 
587 	hibernation_ops->enter();
588 	/* We should never get here */
589 	while (1);
590 
591  Power_up:
592 	syscore_resume();
593 	system_state = SYSTEM_RUNNING;
594 	local_irq_enable();
595 
596  Enable_cpus:
597 	suspend_enable_secondary_cpus();
598 
599  Platform_finish:
600 	hibernation_ops->finish();
601 
602 	dpm_resume_start(PMSG_RESTORE);
603 
604  Resume_devices:
605 	entering_platform_hibernation = false;
606 	dpm_resume_end(PMSG_RESTORE);
607 	resume_console();
608 
609  Close:
610 	hibernation_ops->end();
611 
612 	return error;
613 }
614 
615 /**
616  * power_down - Shut the machine down for hibernation.
617  *
618  * Use the platform driver, if configured, to put the system into the sleep
619  * state corresponding to hibernation, or try to power it off or reboot,
620  * depending on the value of hibernation_mode.
621  */
622 static void power_down(void)
623 {
624 #ifdef CONFIG_SUSPEND
625 	int error;
626 
627 	if (hibernation_mode == HIBERNATION_SUSPEND) {
628 		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
629 		if (error) {
630 			hibernation_mode = hibernation_ops ?
631 						HIBERNATION_PLATFORM :
632 						HIBERNATION_SHUTDOWN;
633 		} else {
634 			/* Restore swap signature. */
635 			error = swsusp_unmark();
636 			if (error)
637 				pr_err("Swap will be unusable! Try swapon -a.\n");
638 
639 			return;
640 		}
641 	}
642 #endif
643 
644 	switch (hibernation_mode) {
645 	case HIBERNATION_REBOOT:
646 		kernel_restart(NULL);
647 		break;
648 	case HIBERNATION_PLATFORM:
649 		hibernation_platform_enter();
650 		/* Fall through */
651 	case HIBERNATION_SHUTDOWN:
652 		if (pm_power_off)
653 			kernel_power_off();
654 		break;
655 	}
656 	kernel_halt();
657 	/*
658 	 * Valid image is on the disk, if we continue we risk serious data
659 	 * corruption after resume.
660 	 */
661 	pr_crit("Power down manually\n");
662 	while (1)
663 		cpu_relax();
664 }
665 
666 static int load_image_and_restore(void)
667 {
668 	int error;
669 	unsigned int flags;
670 
671 	pm_pr_dbg("Loading hibernation image.\n");
672 
673 	lock_device_hotplug();
674 	error = create_basic_memory_bitmaps();
675 	if (error)
676 		goto Unlock;
677 
678 	error = swsusp_read(&flags);
679 	swsusp_close(FMODE_READ);
680 	if (!error)
681 		hibernation_restore(flags & SF_PLATFORM_MODE);
682 
683 	pr_err("Failed to load image, recovering.\n");
684 	swsusp_free();
685 	free_basic_memory_bitmaps();
686  Unlock:
687 	unlock_device_hotplug();
688 
689 	return error;
690 }
691 
692 /**
693  * hibernate - Carry out system hibernation, including saving the image.
694  */
695 int hibernate(void)
696 {
697 	int error, nr_calls = 0;
698 	bool snapshot_test = false;
699 
700 	if (!hibernation_available()) {
701 		pm_pr_dbg("Hibernation not available.\n");
702 		return -EPERM;
703 	}
704 
705 	lock_system_sleep();
706 	/* The snapshot device should not be opened while we're running */
707 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
708 		error = -EBUSY;
709 		goto Unlock;
710 	}
711 
712 	pr_info("hibernation entry\n");
713 	pm_prepare_console();
714 	error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls);
715 	if (error) {
716 		nr_calls--;
717 		goto Exit;
718 	}
719 
720 	ksys_sync_helper();
721 
722 	error = freeze_processes();
723 	if (error)
724 		goto Exit;
725 
726 	lock_device_hotplug();
727 	/* Allocate memory management structures */
728 	error = create_basic_memory_bitmaps();
729 	if (error)
730 		goto Thaw;
731 
732 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
733 	if (error || freezer_test_done)
734 		goto Free_bitmaps;
735 
736 	if (in_suspend) {
737 		unsigned int flags = 0;
738 
739 		if (hibernation_mode == HIBERNATION_PLATFORM)
740 			flags |= SF_PLATFORM_MODE;
741 		if (nocompress)
742 			flags |= SF_NOCOMPRESS_MODE;
743 		else
744 		        flags |= SF_CRC32_MODE;
745 
746 		pm_pr_dbg("Writing hibernation image.\n");
747 		error = swsusp_write(flags);
748 		swsusp_free();
749 		if (!error) {
750 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
751 				snapshot_test = true;
752 			else
753 				power_down();
754 		}
755 		in_suspend = 0;
756 		pm_restore_gfp_mask();
757 	} else {
758 		pm_pr_dbg("Hibernation image restored successfully.\n");
759 	}
760 
761  Free_bitmaps:
762 	free_basic_memory_bitmaps();
763  Thaw:
764 	unlock_device_hotplug();
765 	if (snapshot_test) {
766 		pm_pr_dbg("Checking hibernation image\n");
767 		error = swsusp_check();
768 		if (!error)
769 			error = load_image_and_restore();
770 	}
771 	thaw_processes();
772 
773 	/* Don't bother checking whether freezer_test_done is true */
774 	freezer_test_done = false;
775  Exit:
776 	__pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
777 	pm_restore_console();
778 	atomic_inc(&snapshot_device_available);
779  Unlock:
780 	unlock_system_sleep();
781 	pr_info("hibernation exit\n");
782 
783 	return error;
784 }
785 
786 
787 /**
788  * software_resume - Resume from a saved hibernation image.
789  *
790  * This routine is called as a late initcall, when all devices have been
791  * discovered and initialized already.
792  *
793  * The image reading code is called to see if there is a hibernation image
794  * available for reading.  If that is the case, devices are quiesced and the
795  * contents of memory is restored from the saved image.
796  *
797  * If this is successful, control reappears in the restored target kernel in
798  * hibernation_snapshot() which returns to hibernate().  Otherwise, the routine
799  * attempts to recover gracefully and make the kernel return to the normal mode
800  * of operation.
801  */
802 static int software_resume(void)
803 {
804 	int error, nr_calls = 0;
805 
806 	/*
807 	 * If the user said "noresume".. bail out early.
808 	 */
809 	if (noresume || !hibernation_available())
810 		return 0;
811 
812 	/*
813 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
814 	 * is configured into the kernel. Since the regular hibernate
815 	 * trigger path is via sysfs which takes a buffer mutex before
816 	 * calling hibernate functions (which take system_transition_mutex)
817 	 * this can cause lockdep to complain about a possible ABBA deadlock
818 	 * which cannot happen since we're in the boot code here and
819 	 * sysfs can't be invoked yet. Therefore, we use a subclass
820 	 * here to avoid lockdep complaining.
821 	 */
822 	mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
823 
824 	if (swsusp_resume_device)
825 		goto Check_image;
826 
827 	if (!strlen(resume_file)) {
828 		error = -ENOENT;
829 		goto Unlock;
830 	}
831 
832 	pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
833 
834 	if (resume_delay) {
835 		pr_info("Waiting %dsec before reading resume device ...\n",
836 			resume_delay);
837 		ssleep(resume_delay);
838 	}
839 
840 	/* Check if the device is there */
841 	swsusp_resume_device = name_to_dev_t(resume_file);
842 
843 	/*
844 	 * name_to_dev_t is ineffective to verify parition if resume_file is in
845 	 * integer format. (e.g. major:minor)
846 	 */
847 	if (isdigit(resume_file[0]) && resume_wait) {
848 		int partno;
849 		while (!get_gendisk(swsusp_resume_device, &partno))
850 			msleep(10);
851 	}
852 
853 	if (!swsusp_resume_device) {
854 		/*
855 		 * Some device discovery might still be in progress; we need
856 		 * to wait for this to finish.
857 		 */
858 		wait_for_device_probe();
859 
860 		if (resume_wait) {
861 			while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
862 				msleep(10);
863 			async_synchronize_full();
864 		}
865 
866 		swsusp_resume_device = name_to_dev_t(resume_file);
867 		if (!swsusp_resume_device) {
868 			error = -ENODEV;
869 			goto Unlock;
870 		}
871 	}
872 
873  Check_image:
874 	pm_pr_dbg("Hibernation image partition %d:%d present\n",
875 		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
876 
877 	pm_pr_dbg("Looking for hibernation image.\n");
878 	error = swsusp_check();
879 	if (error)
880 		goto Unlock;
881 
882 	/* The snapshot device should not be opened while we're running */
883 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
884 		error = -EBUSY;
885 		swsusp_close(FMODE_READ);
886 		goto Unlock;
887 	}
888 
889 	pr_info("resume from hibernation\n");
890 	pm_prepare_console();
891 	error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
892 	if (error) {
893 		nr_calls--;
894 		goto Close_Finish;
895 	}
896 
897 	pm_pr_dbg("Preparing processes for hibernation restore.\n");
898 	error = freeze_processes();
899 	if (error)
900 		goto Close_Finish;
901 	error = load_image_and_restore();
902 	thaw_processes();
903  Finish:
904 	__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
905 	pm_restore_console();
906 	pr_info("resume failed (%d)\n", error);
907 	atomic_inc(&snapshot_device_available);
908 	/* For success case, the suspend path will release the lock */
909  Unlock:
910 	mutex_unlock(&system_transition_mutex);
911 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
912 	return error;
913  Close_Finish:
914 	swsusp_close(FMODE_READ);
915 	goto Finish;
916 }
917 
918 late_initcall_sync(software_resume);
919 
920 
921 static const char * const hibernation_modes[] = {
922 	[HIBERNATION_PLATFORM]	= "platform",
923 	[HIBERNATION_SHUTDOWN]	= "shutdown",
924 	[HIBERNATION_REBOOT]	= "reboot",
925 #ifdef CONFIG_SUSPEND
926 	[HIBERNATION_SUSPEND]	= "suspend",
927 #endif
928 	[HIBERNATION_TEST_RESUME]	= "test_resume",
929 };
930 
931 /*
932  * /sys/power/disk - Control hibernation mode.
933  *
934  * Hibernation can be handled in several ways.  There are a few different ways
935  * to put the system into the sleep state: using the platform driver (e.g. ACPI
936  * or other hibernation_ops), powering it off or rebooting it (for testing
937  * mostly).
938  *
939  * The sysfs file /sys/power/disk provides an interface for selecting the
940  * hibernation mode to use.  Reading from this file causes the available modes
941  * to be printed.  There are 3 modes that can be supported:
942  *
943  *	'platform'
944  *	'shutdown'
945  *	'reboot'
946  *
947  * If a platform hibernation driver is in use, 'platform' will be supported
948  * and will be used by default.  Otherwise, 'shutdown' will be used by default.
949  * The selected option (i.e. the one corresponding to the current value of
950  * hibernation_mode) is enclosed by a square bracket.
951  *
952  * To select a given hibernation mode it is necessary to write the mode's
953  * string representation (as returned by reading from /sys/power/disk) back
954  * into /sys/power/disk.
955  */
956 
957 static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
958 			 char *buf)
959 {
960 	int i;
961 	char *start = buf;
962 
963 	if (!hibernation_available())
964 		return sprintf(buf, "[disabled]\n");
965 
966 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
967 		if (!hibernation_modes[i])
968 			continue;
969 		switch (i) {
970 		case HIBERNATION_SHUTDOWN:
971 		case HIBERNATION_REBOOT:
972 #ifdef CONFIG_SUSPEND
973 		case HIBERNATION_SUSPEND:
974 #endif
975 		case HIBERNATION_TEST_RESUME:
976 			break;
977 		case HIBERNATION_PLATFORM:
978 			if (hibernation_ops)
979 				break;
980 			/* not a valid mode, continue with loop */
981 			continue;
982 		}
983 		if (i == hibernation_mode)
984 			buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
985 		else
986 			buf += sprintf(buf, "%s ", hibernation_modes[i]);
987 	}
988 	buf += sprintf(buf, "\n");
989 	return buf-start;
990 }
991 
992 static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
993 			  const char *buf, size_t n)
994 {
995 	int error = 0;
996 	int i;
997 	int len;
998 	char *p;
999 	int mode = HIBERNATION_INVALID;
1000 
1001 	if (!hibernation_available())
1002 		return -EPERM;
1003 
1004 	p = memchr(buf, '\n', n);
1005 	len = p ? p - buf : n;
1006 
1007 	lock_system_sleep();
1008 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1009 		if (len == strlen(hibernation_modes[i])
1010 		    && !strncmp(buf, hibernation_modes[i], len)) {
1011 			mode = i;
1012 			break;
1013 		}
1014 	}
1015 	if (mode != HIBERNATION_INVALID) {
1016 		switch (mode) {
1017 		case HIBERNATION_SHUTDOWN:
1018 		case HIBERNATION_REBOOT:
1019 #ifdef CONFIG_SUSPEND
1020 		case HIBERNATION_SUSPEND:
1021 #endif
1022 		case HIBERNATION_TEST_RESUME:
1023 			hibernation_mode = mode;
1024 			break;
1025 		case HIBERNATION_PLATFORM:
1026 			if (hibernation_ops)
1027 				hibernation_mode = mode;
1028 			else
1029 				error = -EINVAL;
1030 		}
1031 	} else
1032 		error = -EINVAL;
1033 
1034 	if (!error)
1035 		pm_pr_dbg("Hibernation mode set to '%s'\n",
1036 			       hibernation_modes[mode]);
1037 	unlock_system_sleep();
1038 	return error ? error : n;
1039 }
1040 
1041 power_attr(disk);
1042 
1043 static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1044 			   char *buf)
1045 {
1046 	return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
1047 		       MINOR(swsusp_resume_device));
1048 }
1049 
1050 static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1051 			    const char *buf, size_t n)
1052 {
1053 	dev_t res;
1054 	int len = n;
1055 	char *name;
1056 
1057 	if (len && buf[len-1] == '\n')
1058 		len--;
1059 	name = kstrndup(buf, len, GFP_KERNEL);
1060 	if (!name)
1061 		return -ENOMEM;
1062 
1063 	res = name_to_dev_t(name);
1064 	kfree(name);
1065 	if (!res)
1066 		return -EINVAL;
1067 
1068 	lock_system_sleep();
1069 	swsusp_resume_device = res;
1070 	unlock_system_sleep();
1071 	pm_pr_dbg("Configured hibernation resume from disk to %u\n",
1072 		  swsusp_resume_device);
1073 	noresume = 0;
1074 	software_resume();
1075 	return n;
1076 }
1077 
1078 power_attr(resume);
1079 
1080 static ssize_t resume_offset_show(struct kobject *kobj,
1081 				  struct kobj_attribute *attr, char *buf)
1082 {
1083 	return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
1084 }
1085 
1086 static ssize_t resume_offset_store(struct kobject *kobj,
1087 				   struct kobj_attribute *attr, const char *buf,
1088 				   size_t n)
1089 {
1090 	unsigned long long offset;
1091 	int rc;
1092 
1093 	rc = kstrtoull(buf, 0, &offset);
1094 	if (rc)
1095 		return rc;
1096 	swsusp_resume_block = offset;
1097 
1098 	return n;
1099 }
1100 
1101 power_attr(resume_offset);
1102 
1103 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1104 			       char *buf)
1105 {
1106 	return sprintf(buf, "%lu\n", image_size);
1107 }
1108 
1109 static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1110 				const char *buf, size_t n)
1111 {
1112 	unsigned long size;
1113 
1114 	if (sscanf(buf, "%lu", &size) == 1) {
1115 		image_size = size;
1116 		return n;
1117 	}
1118 
1119 	return -EINVAL;
1120 }
1121 
1122 power_attr(image_size);
1123 
1124 static ssize_t reserved_size_show(struct kobject *kobj,
1125 				  struct kobj_attribute *attr, char *buf)
1126 {
1127 	return sprintf(buf, "%lu\n", reserved_size);
1128 }
1129 
1130 static ssize_t reserved_size_store(struct kobject *kobj,
1131 				   struct kobj_attribute *attr,
1132 				   const char *buf, size_t n)
1133 {
1134 	unsigned long size;
1135 
1136 	if (sscanf(buf, "%lu", &size) == 1) {
1137 		reserved_size = size;
1138 		return n;
1139 	}
1140 
1141 	return -EINVAL;
1142 }
1143 
1144 power_attr(reserved_size);
1145 
1146 static struct attribute * g[] = {
1147 	&disk_attr.attr,
1148 	&resume_offset_attr.attr,
1149 	&resume_attr.attr,
1150 	&image_size_attr.attr,
1151 	&reserved_size_attr.attr,
1152 	NULL,
1153 };
1154 
1155 
1156 static const struct attribute_group attr_group = {
1157 	.attrs = g,
1158 };
1159 
1160 
1161 static int __init pm_disk_init(void)
1162 {
1163 	return sysfs_create_group(power_kobj, &attr_group);
1164 }
1165 
1166 core_initcall(pm_disk_init);
1167 
1168 
1169 static int __init resume_setup(char *str)
1170 {
1171 	if (noresume)
1172 		return 1;
1173 
1174 	strncpy( resume_file, str, 255 );
1175 	return 1;
1176 }
1177 
1178 static int __init resume_offset_setup(char *str)
1179 {
1180 	unsigned long long offset;
1181 
1182 	if (noresume)
1183 		return 1;
1184 
1185 	if (sscanf(str, "%llu", &offset) == 1)
1186 		swsusp_resume_block = offset;
1187 
1188 	return 1;
1189 }
1190 
1191 static int __init hibernate_setup(char *str)
1192 {
1193 	if (!strncmp(str, "noresume", 8)) {
1194 		noresume = 1;
1195 	} else if (!strncmp(str, "nocompress", 10)) {
1196 		nocompress = 1;
1197 	} else if (!strncmp(str, "no", 2)) {
1198 		noresume = 1;
1199 		nohibernate = 1;
1200 	} else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1201 		   && !strncmp(str, "protect_image", 13)) {
1202 		enable_restore_image_protection();
1203 	}
1204 	return 1;
1205 }
1206 
1207 static int __init noresume_setup(char *str)
1208 {
1209 	noresume = 1;
1210 	return 1;
1211 }
1212 
1213 static int __init resumewait_setup(char *str)
1214 {
1215 	resume_wait = 1;
1216 	return 1;
1217 }
1218 
1219 static int __init resumedelay_setup(char *str)
1220 {
1221 	int rc = kstrtouint(str, 0, &resume_delay);
1222 
1223 	if (rc)
1224 		return rc;
1225 	return 1;
1226 }
1227 
1228 static int __init nohibernate_setup(char *str)
1229 {
1230 	noresume = 1;
1231 	nohibernate = 1;
1232 	return 1;
1233 }
1234 
1235 __setup("noresume", noresume_setup);
1236 __setup("resume_offset=", resume_offset_setup);
1237 __setup("resume=", resume_setup);
1238 __setup("hibernate=", hibernate_setup);
1239 __setup("resumewait", resumewait_setup);
1240 __setup("resumedelay=", resumedelay_setup);
1241 __setup("nohibernate", nohibernate_setup);
1242