1 /* 2 * Kernel Debugger Architecture Independent Breakpoint Handler 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. 9 * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. 10 */ 11 12 #include <linux/string.h> 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <linux/kdb.h> 16 #include <linux/kgdb.h> 17 #include <linux/smp.h> 18 #include <linux/sched.h> 19 #include <linux/interrupt.h> 20 #include "kdb_private.h" 21 22 /* 23 * Table of kdb_breakpoints 24 */ 25 kdb_bp_t kdb_breakpoints[KDB_MAXBPT]; 26 27 static void kdb_setsinglestep(struct pt_regs *regs) 28 { 29 KDB_STATE_SET(DOING_SS); 30 } 31 32 static char *kdb_rwtypes[] = { 33 "Instruction(i)", 34 "Instruction(Register)", 35 "Data Write", 36 "I/O", 37 "Data Access" 38 }; 39 40 static char *kdb_bptype(kdb_bp_t *bp) 41 { 42 if (bp->bp_type < 0 || bp->bp_type > 4) 43 return ""; 44 45 return kdb_rwtypes[bp->bp_type]; 46 } 47 48 static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp) 49 { 50 int nextarg = *nextargp; 51 int diag; 52 53 bp->bph_length = 1; 54 if ((argc + 1) != nextarg) { 55 if (strncasecmp(argv[nextarg], "datar", sizeof("datar")) == 0) 56 bp->bp_type = BP_ACCESS_WATCHPOINT; 57 else if (strncasecmp(argv[nextarg], "dataw", sizeof("dataw")) == 0) 58 bp->bp_type = BP_WRITE_WATCHPOINT; 59 else if (strncasecmp(argv[nextarg], "inst", sizeof("inst")) == 0) 60 bp->bp_type = BP_HARDWARE_BREAKPOINT; 61 else 62 return KDB_ARGCOUNT; 63 64 bp->bph_length = 1; 65 66 nextarg++; 67 68 if ((argc + 1) != nextarg) { 69 unsigned long len; 70 71 diag = kdbgetularg((char *)argv[nextarg], 72 &len); 73 if (diag) 74 return diag; 75 76 77 if (len > 8) 78 return KDB_BADLENGTH; 79 80 bp->bph_length = len; 81 nextarg++; 82 } 83 84 if ((argc + 1) != nextarg) 85 return KDB_ARGCOUNT; 86 } 87 88 *nextargp = nextarg; 89 return 0; 90 } 91 92 static int _kdb_bp_remove(kdb_bp_t *bp) 93 { 94 int ret = 1; 95 if (!bp->bp_installed) 96 return ret; 97 if (!bp->bp_type) 98 ret = dbg_remove_sw_break(bp->bp_addr); 99 else 100 ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr, 101 bp->bph_length, 102 bp->bp_type); 103 if (ret == 0) 104 bp->bp_installed = 0; 105 return ret; 106 } 107 108 static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp) 109 { 110 if (KDB_DEBUG(BP)) 111 kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs)); 112 113 /* 114 * Setup single step 115 */ 116 kdb_setsinglestep(regs); 117 118 /* 119 * Reset delay attribute 120 */ 121 bp->bp_delay = 0; 122 bp->bp_delayed = 1; 123 } 124 125 static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp) 126 { 127 int ret; 128 /* 129 * Install the breakpoint, if it is not already installed. 130 */ 131 132 if (KDB_DEBUG(BP)) 133 kdb_printf("%s: bp_installed %d\n", 134 __func__, bp->bp_installed); 135 if (!KDB_STATE(SSBPT)) 136 bp->bp_delay = 0; 137 if (bp->bp_installed) 138 return 1; 139 if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) { 140 if (KDB_DEBUG(BP)) 141 kdb_printf("%s: delayed bp\n", __func__); 142 kdb_handle_bp(regs, bp); 143 return 0; 144 } 145 if (!bp->bp_type) 146 ret = dbg_set_sw_break(bp->bp_addr); 147 else 148 ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr, 149 bp->bph_length, 150 bp->bp_type); 151 if (ret == 0) { 152 bp->bp_installed = 1; 153 } else { 154 kdb_printf("%s: failed to set breakpoint at 0x%lx\n", 155 __func__, bp->bp_addr); 156 #ifdef CONFIG_DEBUG_RODATA 157 if (!bp->bp_type) { 158 kdb_printf("Software breakpoints are unavailable.\n" 159 " Change the kernel CONFIG_DEBUG_RODATA=n\n" 160 " OR use hw breaks: help bph\n"); 161 } 162 #endif 163 return 1; 164 } 165 return 0; 166 } 167 168 /* 169 * kdb_bp_install 170 * 171 * Install kdb_breakpoints prior to returning from the 172 * kernel debugger. This allows the kdb_breakpoints to be set 173 * upon functions that are used internally by kdb, such as 174 * printk(). This function is only called once per kdb session. 175 */ 176 void kdb_bp_install(struct pt_regs *regs) 177 { 178 int i; 179 180 for (i = 0; i < KDB_MAXBPT; i++) { 181 kdb_bp_t *bp = &kdb_breakpoints[i]; 182 183 if (KDB_DEBUG(BP)) { 184 kdb_printf("%s: bp %d bp_enabled %d\n", 185 __func__, i, bp->bp_enabled); 186 } 187 if (bp->bp_enabled) 188 _kdb_bp_install(regs, bp); 189 } 190 } 191 192 /* 193 * kdb_bp_remove 194 * 195 * Remove kdb_breakpoints upon entry to the kernel debugger. 196 * 197 * Parameters: 198 * None. 199 * Outputs: 200 * None. 201 * Returns: 202 * None. 203 * Locking: 204 * None. 205 * Remarks: 206 */ 207 void kdb_bp_remove(void) 208 { 209 int i; 210 211 for (i = KDB_MAXBPT - 1; i >= 0; i--) { 212 kdb_bp_t *bp = &kdb_breakpoints[i]; 213 214 if (KDB_DEBUG(BP)) { 215 kdb_printf("%s: bp %d bp_enabled %d\n", 216 __func__, i, bp->bp_enabled); 217 } 218 if (bp->bp_enabled) 219 _kdb_bp_remove(bp); 220 } 221 } 222 223 224 /* 225 * kdb_printbp 226 * 227 * Internal function to format and print a breakpoint entry. 228 * 229 * Parameters: 230 * None. 231 * Outputs: 232 * None. 233 * Returns: 234 * None. 235 * Locking: 236 * None. 237 * Remarks: 238 */ 239 240 static void kdb_printbp(kdb_bp_t *bp, int i) 241 { 242 kdb_printf("%s ", kdb_bptype(bp)); 243 kdb_printf("BP #%d at ", i); 244 kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT); 245 246 if (bp->bp_enabled) 247 kdb_printf("\n is enabled"); 248 else 249 kdb_printf("\n is disabled"); 250 251 kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n", 252 bp->bp_addr, bp->bp_type, bp->bp_installed); 253 254 kdb_printf("\n"); 255 } 256 257 /* 258 * kdb_bp 259 * 260 * Handle the bp commands. 261 * 262 * [bp|bph] <addr-expression> [DATAR|DATAW] 263 * 264 * Parameters: 265 * argc Count of arguments in argv 266 * argv Space delimited command line arguments 267 * Outputs: 268 * None. 269 * Returns: 270 * Zero for success, a kdb diagnostic if failure. 271 * Locking: 272 * None. 273 * Remarks: 274 * 275 * bp Set breakpoint on all cpus. Only use hardware assist if need. 276 * bph Set breakpoint on all cpus. Force hardware register 277 */ 278 279 static int kdb_bp(int argc, const char **argv) 280 { 281 int i, bpno; 282 kdb_bp_t *bp, *bp_check; 283 int diag; 284 char *symname = NULL; 285 long offset = 0ul; 286 int nextarg; 287 kdb_bp_t template = {0}; 288 289 if (argc == 0) { 290 /* 291 * Display breakpoint table 292 */ 293 for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; 294 bpno++, bp++) { 295 if (bp->bp_free) 296 continue; 297 kdb_printbp(bp, bpno); 298 } 299 300 return 0; 301 } 302 303 nextarg = 1; 304 diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr, 305 &offset, &symname); 306 if (diag) 307 return diag; 308 if (!template.bp_addr) 309 return KDB_BADINT; 310 311 /* 312 * Find an empty bp structure to allocate 313 */ 314 for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) { 315 if (bp->bp_free) 316 break; 317 } 318 319 if (bpno == KDB_MAXBPT) 320 return KDB_TOOMANYBPT; 321 322 if (strcmp(argv[0], "bph") == 0) { 323 template.bp_type = BP_HARDWARE_BREAKPOINT; 324 diag = kdb_parsebp(argc, argv, &nextarg, &template); 325 if (diag) 326 return diag; 327 } else { 328 template.bp_type = BP_BREAKPOINT; 329 } 330 331 /* 332 * Check for clashing breakpoints. 333 * 334 * Note, in this design we can't have hardware breakpoints 335 * enabled for both read and write on the same address. 336 */ 337 for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT; 338 i++, bp_check++) { 339 if (!bp_check->bp_free && 340 bp_check->bp_addr == template.bp_addr) { 341 kdb_printf("You already have a breakpoint at " 342 kdb_bfd_vma_fmt0 "\n", template.bp_addr); 343 return KDB_DUPBPT; 344 } 345 } 346 347 template.bp_enabled = 1; 348 349 /* 350 * Actually allocate the breakpoint found earlier 351 */ 352 *bp = template; 353 bp->bp_free = 0; 354 355 kdb_printbp(bp, bpno); 356 357 return 0; 358 } 359 360 /* 361 * kdb_bc 362 * 363 * Handles the 'bc', 'be', and 'bd' commands 364 * 365 * [bd|bc|be] <breakpoint-number> 366 * [bd|bc|be] * 367 * 368 * Parameters: 369 * argc Count of arguments in argv 370 * argv Space delimited command line arguments 371 * Outputs: 372 * None. 373 * Returns: 374 * Zero for success, a kdb diagnostic for failure 375 * Locking: 376 * None. 377 * Remarks: 378 */ 379 static int kdb_bc(int argc, const char **argv) 380 { 381 unsigned long addr; 382 kdb_bp_t *bp = NULL; 383 int lowbp = KDB_MAXBPT; 384 int highbp = 0; 385 int done = 0; 386 int i; 387 int diag = 0; 388 389 int cmd; /* KDBCMD_B? */ 390 #define KDBCMD_BC 0 391 #define KDBCMD_BE 1 392 #define KDBCMD_BD 2 393 394 if (strcmp(argv[0], "be") == 0) 395 cmd = KDBCMD_BE; 396 else if (strcmp(argv[0], "bd") == 0) 397 cmd = KDBCMD_BD; 398 else 399 cmd = KDBCMD_BC; 400 401 if (argc != 1) 402 return KDB_ARGCOUNT; 403 404 if (strcmp(argv[1], "*") == 0) { 405 lowbp = 0; 406 highbp = KDB_MAXBPT; 407 } else { 408 diag = kdbgetularg(argv[1], &addr); 409 if (diag) 410 return diag; 411 412 /* 413 * For addresses less than the maximum breakpoint number, 414 * assume that the breakpoint number is desired. 415 */ 416 if (addr < KDB_MAXBPT) { 417 bp = &kdb_breakpoints[addr]; 418 lowbp = highbp = addr; 419 highbp++; 420 } else { 421 for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; 422 i++, bp++) { 423 if (bp->bp_addr == addr) { 424 lowbp = highbp = i; 425 highbp++; 426 break; 427 } 428 } 429 } 430 } 431 432 /* 433 * Now operate on the set of breakpoints matching the input 434 * criteria (either '*' for all, or an individual breakpoint). 435 */ 436 for (bp = &kdb_breakpoints[lowbp], i = lowbp; 437 i < highbp; 438 i++, bp++) { 439 if (bp->bp_free) 440 continue; 441 442 done++; 443 444 switch (cmd) { 445 case KDBCMD_BC: 446 bp->bp_enabled = 0; 447 448 kdb_printf("Breakpoint %d at " 449 kdb_bfd_vma_fmt " cleared\n", 450 i, bp->bp_addr); 451 452 bp->bp_addr = 0; 453 bp->bp_free = 1; 454 455 break; 456 case KDBCMD_BE: 457 bp->bp_enabled = 1; 458 459 kdb_printf("Breakpoint %d at " 460 kdb_bfd_vma_fmt " enabled", 461 i, bp->bp_addr); 462 463 kdb_printf("\n"); 464 break; 465 case KDBCMD_BD: 466 if (!bp->bp_enabled) 467 break; 468 469 bp->bp_enabled = 0; 470 471 kdb_printf("Breakpoint %d at " 472 kdb_bfd_vma_fmt " disabled\n", 473 i, bp->bp_addr); 474 475 break; 476 } 477 if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) { 478 bp->bp_delay = 0; 479 KDB_STATE_CLEAR(SSBPT); 480 } 481 } 482 483 return (!done) ? KDB_BPTNOTFOUND : 0; 484 } 485 486 /* 487 * kdb_ss 488 * 489 * Process the 'ss' (Single Step) command. 490 * 491 * ss 492 * 493 * Parameters: 494 * argc Argument count 495 * argv Argument vector 496 * Outputs: 497 * None. 498 * Returns: 499 * KDB_CMD_SS for success, a kdb error if failure. 500 * Locking: 501 * None. 502 * Remarks: 503 * 504 * Set the arch specific option to trigger a debug trap after the next 505 * instruction. 506 */ 507 508 static int kdb_ss(int argc, const char **argv) 509 { 510 if (argc != 0) 511 return KDB_ARGCOUNT; 512 /* 513 * Set trace flag and go. 514 */ 515 KDB_STATE_SET(DOING_SS); 516 return KDB_CMD_SS; 517 } 518 519 /* Initialize the breakpoint table and register breakpoint commands. */ 520 521 void __init kdb_initbptab(void) 522 { 523 int i; 524 kdb_bp_t *bp; 525 526 /* 527 * First time initialization. 528 */ 529 memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints)); 530 531 for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) 532 bp->bp_free = 1; 533 534 kdb_register_repeat("bp", kdb_bp, "[<vaddr>]", 535 "Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS); 536 kdb_register_repeat("bl", kdb_bp, "[<vaddr>]", 537 "Display breakpoints", 0, KDB_REPEAT_NO_ARGS); 538 if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) 539 kdb_register_repeat("bph", kdb_bp, "[<vaddr>]", 540 "[datar [length]|dataw [length]] Set hw brk", 0, KDB_REPEAT_NO_ARGS); 541 kdb_register_repeat("bc", kdb_bc, "<bpnum>", 542 "Clear Breakpoint", 0, KDB_REPEAT_NONE); 543 kdb_register_repeat("be", kdb_bc, "<bpnum>", 544 "Enable Breakpoint", 0, KDB_REPEAT_NONE); 545 kdb_register_repeat("bd", kdb_bc, "<bpnum>", 546 "Disable Breakpoint", 0, KDB_REPEAT_NONE); 547 548 kdb_register_repeat("ss", kdb_ss, "", 549 "Single Step", 1, KDB_REPEAT_NO_ARGS); 550 /* 551 * Architecture dependent initialization. 552 */ 553 } 554