xref: /openbmc/linux/kernel/debug/gdbstub.c (revision e330fb14)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Kernel Debug Core
4  *
5  * Maintainer: Jason Wessel <jason.wessel@windriver.com>
6  *
7  * Copyright (C) 2000-2001 VERITAS Software Corporation.
8  * Copyright (C) 2002-2004 Timesys Corporation
9  * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
10  * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
11  * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
12  * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
13  * Copyright (C) 2005-2009 Wind River Systems, Inc.
14  * Copyright (C) 2007 MontaVista Software, Inc.
15  * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
16  *
17  * Contributors at various stages not listed above:
18  *  Jason Wessel ( jason.wessel@windriver.com )
19  *  George Anzinger <george@mvista.com>
20  *  Anurekh Saxena (anurekh.saxena@timesys.com)
21  *  Lake Stevens Instrument Division (Glenn Engel)
22  *  Jim Kingdon, Cygnus Support.
23  *
24  * Original KGDB stub: David Grothe <dave@gcom.com>,
25  * Tigran Aivazian <tigran@sco.com>
26  */
27 
28 #include <linux/kernel.h>
29 #include <linux/sched/signal.h>
30 #include <linux/kgdb.h>
31 #include <linux/kdb.h>
32 #include <linux/serial_core.h>
33 #include <linux/reboot.h>
34 #include <linux/uaccess.h>
35 #include <asm/cacheflush.h>
36 #include <asm/unaligned.h>
37 #include "debug_core.h"
38 
39 #define KGDB_MAX_THREAD_QUERY 17
40 
41 /* Our I/O buffers. */
42 static char			remcom_in_buffer[BUFMAX];
43 static char			remcom_out_buffer[BUFMAX];
44 static int			gdbstub_use_prev_in_buf;
45 static int			gdbstub_prev_in_buf_pos;
46 
47 /* Storage for the registers, in GDB format. */
48 static unsigned long		gdb_regs[(NUMREGBYTES +
49 					sizeof(unsigned long) - 1) /
50 					sizeof(unsigned long)];
51 
52 /*
53  * GDB remote protocol parser:
54  */
55 
56 #ifdef CONFIG_KGDB_KDB
57 static int gdbstub_read_wait(void)
58 {
59 	int ret = -1;
60 	int i;
61 
62 	if (unlikely(gdbstub_use_prev_in_buf)) {
63 		if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
64 			return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
65 		else
66 			gdbstub_use_prev_in_buf = 0;
67 	}
68 
69 	/* poll any additional I/O interfaces that are defined */
70 	while (ret < 0)
71 		for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
72 			ret = kdb_poll_funcs[i]();
73 			if (ret > 0)
74 				break;
75 		}
76 	return ret;
77 }
78 #else
79 static int gdbstub_read_wait(void)
80 {
81 	int ret = dbg_io_ops->read_char();
82 	while (ret == NO_POLL_CHAR)
83 		ret = dbg_io_ops->read_char();
84 	return ret;
85 }
86 #endif
87 /* scan for the sequence $<data>#<checksum> */
88 static void get_packet(char *buffer)
89 {
90 	unsigned char checksum;
91 	unsigned char xmitcsum;
92 	int count;
93 	char ch;
94 
95 	do {
96 		/*
97 		 * Spin and wait around for the start character, ignore all
98 		 * other characters:
99 		 */
100 		while ((ch = (gdbstub_read_wait())) != '$')
101 			/* nothing */;
102 
103 		kgdb_connected = 1;
104 		checksum = 0;
105 		xmitcsum = -1;
106 
107 		count = 0;
108 
109 		/*
110 		 * now, read until a # or end of buffer is found:
111 		 */
112 		while (count < (BUFMAX - 1)) {
113 			ch = gdbstub_read_wait();
114 			if (ch == '#')
115 				break;
116 			checksum = checksum + ch;
117 			buffer[count] = ch;
118 			count = count + 1;
119 		}
120 
121 		if (ch == '#') {
122 			xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
123 			xmitcsum += hex_to_bin(gdbstub_read_wait());
124 
125 			if (checksum != xmitcsum)
126 				/* failed checksum */
127 				dbg_io_ops->write_char('-');
128 			else
129 				/* successful transfer */
130 				dbg_io_ops->write_char('+');
131 			if (dbg_io_ops->flush)
132 				dbg_io_ops->flush();
133 		}
134 		buffer[count] = 0;
135 	} while (checksum != xmitcsum);
136 }
137 
138 /*
139  * Send the packet in buffer.
140  * Check for gdb connection if asked for.
141  */
142 static void put_packet(char *buffer)
143 {
144 	unsigned char checksum;
145 	int count;
146 	char ch;
147 
148 	/*
149 	 * $<packet info>#<checksum>.
150 	 */
151 	while (1) {
152 		dbg_io_ops->write_char('$');
153 		checksum = 0;
154 		count = 0;
155 
156 		while ((ch = buffer[count])) {
157 			dbg_io_ops->write_char(ch);
158 			checksum += ch;
159 			count++;
160 		}
161 
162 		dbg_io_ops->write_char('#');
163 		dbg_io_ops->write_char(hex_asc_hi(checksum));
164 		dbg_io_ops->write_char(hex_asc_lo(checksum));
165 		if (dbg_io_ops->flush)
166 			dbg_io_ops->flush();
167 
168 		/* Now see what we get in reply. */
169 		ch = gdbstub_read_wait();
170 
171 		if (ch == 3)
172 			ch = gdbstub_read_wait();
173 
174 		/* If we get an ACK, we are done. */
175 		if (ch == '+')
176 			return;
177 
178 		/*
179 		 * If we get the start of another packet, this means
180 		 * that GDB is attempting to reconnect.  We will NAK
181 		 * the packet being sent, and stop trying to send this
182 		 * packet.
183 		 */
184 		if (ch == '$') {
185 			dbg_io_ops->write_char('-');
186 			if (dbg_io_ops->flush)
187 				dbg_io_ops->flush();
188 			return;
189 		}
190 	}
191 }
192 
193 static char gdbmsgbuf[BUFMAX + 1];
194 
195 void gdbstub_msg_write(const char *s, int len)
196 {
197 	char *bufptr;
198 	int wcount;
199 	int i;
200 
201 	if (len == 0)
202 		len = strlen(s);
203 
204 	/* 'O'utput */
205 	gdbmsgbuf[0] = 'O';
206 
207 	/* Fill and send buffers... */
208 	while (len > 0) {
209 		bufptr = gdbmsgbuf + 1;
210 
211 		/* Calculate how many this time */
212 		if ((len << 1) > (BUFMAX - 2))
213 			wcount = (BUFMAX - 2) >> 1;
214 		else
215 			wcount = len;
216 
217 		/* Pack in hex chars */
218 		for (i = 0; i < wcount; i++)
219 			bufptr = hex_byte_pack(bufptr, s[i]);
220 		*bufptr = '\0';
221 
222 		/* Move up */
223 		s += wcount;
224 		len -= wcount;
225 
226 		/* Write packet */
227 		put_packet(gdbmsgbuf);
228 	}
229 }
230 
231 /*
232  * Convert the memory pointed to by mem into hex, placing result in
233  * buf.  Return a pointer to the last char put in buf (null). May
234  * return an error.
235  */
236 char *kgdb_mem2hex(char *mem, char *buf, int count)
237 {
238 	char *tmp;
239 	int err;
240 
241 	/*
242 	 * We use the upper half of buf as an intermediate buffer for the
243 	 * raw memory copy.  Hex conversion will work against this one.
244 	 */
245 	tmp = buf + count;
246 
247 	err = copy_from_kernel_nofault(tmp, mem, count);
248 	if (err)
249 		return NULL;
250 	while (count > 0) {
251 		buf = hex_byte_pack(buf, *tmp);
252 		tmp++;
253 		count--;
254 	}
255 	*buf = 0;
256 
257 	return buf;
258 }
259 
260 /*
261  * Convert the hex array pointed to by buf into binary to be placed in
262  * mem.  Return a pointer to the character AFTER the last byte
263  * written.  May return an error.
264  */
265 int kgdb_hex2mem(char *buf, char *mem, int count)
266 {
267 	char *tmp_raw;
268 	char *tmp_hex;
269 
270 	/*
271 	 * We use the upper half of buf as an intermediate buffer for the
272 	 * raw memory that is converted from hex.
273 	 */
274 	tmp_raw = buf + count * 2;
275 
276 	tmp_hex = tmp_raw - 1;
277 	while (tmp_hex >= buf) {
278 		tmp_raw--;
279 		*tmp_raw = hex_to_bin(*tmp_hex--);
280 		*tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
281 	}
282 
283 	return copy_to_kernel_nofault(mem, tmp_raw, count);
284 }
285 
286 /*
287  * While we find nice hex chars, build a long_val.
288  * Return number of chars processed.
289  */
290 int kgdb_hex2long(char **ptr, unsigned long *long_val)
291 {
292 	int hex_val;
293 	int num = 0;
294 	int negate = 0;
295 
296 	*long_val = 0;
297 
298 	if (**ptr == '-') {
299 		negate = 1;
300 		(*ptr)++;
301 	}
302 	while (**ptr) {
303 		hex_val = hex_to_bin(**ptr);
304 		if (hex_val < 0)
305 			break;
306 
307 		*long_val = (*long_val << 4) | hex_val;
308 		num++;
309 		(*ptr)++;
310 	}
311 
312 	if (negate)
313 		*long_val = -*long_val;
314 
315 	return num;
316 }
317 
318 /*
319  * Copy the binary array pointed to by buf into mem.  Fix $, #, and
320  * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
321  * The input buf is overwritten with the result to write to mem.
322  */
323 static int kgdb_ebin2mem(char *buf, char *mem, int count)
324 {
325 	int size = 0;
326 	char *c = buf;
327 
328 	while (count-- > 0) {
329 		c[size] = *buf++;
330 		if (c[size] == 0x7d)
331 			c[size] = *buf++ ^ 0x20;
332 		size++;
333 	}
334 
335 	return copy_to_kernel_nofault(mem, c, size);
336 }
337 
338 #if DBG_MAX_REG_NUM > 0
339 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
340 {
341 	int i;
342 	int idx = 0;
343 	char *ptr = (char *)gdb_regs;
344 
345 	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
346 		dbg_get_reg(i, ptr + idx, regs);
347 		idx += dbg_reg_def[i].size;
348 	}
349 }
350 
351 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
352 {
353 	int i;
354 	int idx = 0;
355 	char *ptr = (char *)gdb_regs;
356 
357 	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
358 		dbg_set_reg(i, ptr + idx, regs);
359 		idx += dbg_reg_def[i].size;
360 	}
361 }
362 #endif /* DBG_MAX_REG_NUM > 0 */
363 
364 /* Write memory due to an 'M' or 'X' packet. */
365 static int write_mem_msg(int binary)
366 {
367 	char *ptr = &remcom_in_buffer[1];
368 	unsigned long addr;
369 	unsigned long length;
370 	int err;
371 
372 	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
373 	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
374 		if (binary)
375 			err = kgdb_ebin2mem(ptr, (char *)addr, length);
376 		else
377 			err = kgdb_hex2mem(ptr, (char *)addr, length);
378 		if (err)
379 			return err;
380 		if (CACHE_FLUSH_IS_SAFE)
381 			flush_icache_range(addr, addr + length);
382 		return 0;
383 	}
384 
385 	return -EINVAL;
386 }
387 
388 static void error_packet(char *pkt, int error)
389 {
390 	error = -error;
391 	pkt[0] = 'E';
392 	pkt[1] = hex_asc[(error / 10)];
393 	pkt[2] = hex_asc[(error % 10)];
394 	pkt[3] = '\0';
395 }
396 
397 /*
398  * Thread ID accessors. We represent a flat TID space to GDB, where
399  * the per CPU idle threads (which under Linux all have PID 0) are
400  * remapped to negative TIDs.
401  */
402 
403 #define BUF_THREAD_ID_SIZE	8
404 
405 static char *pack_threadid(char *pkt, unsigned char *id)
406 {
407 	unsigned char *limit;
408 	int lzero = 1;
409 
410 	limit = id + (BUF_THREAD_ID_SIZE / 2);
411 	while (id < limit) {
412 		if (!lzero || *id != 0) {
413 			pkt = hex_byte_pack(pkt, *id);
414 			lzero = 0;
415 		}
416 		id++;
417 	}
418 
419 	if (lzero)
420 		pkt = hex_byte_pack(pkt, 0);
421 
422 	return pkt;
423 }
424 
425 static void int_to_threadref(unsigned char *id, int value)
426 {
427 	put_unaligned_be32(value, id);
428 }
429 
430 static struct task_struct *getthread(struct pt_regs *regs, int tid)
431 {
432 	/*
433 	 * Non-positive TIDs are remapped to the cpu shadow information
434 	 */
435 	if (tid == 0 || tid == -1)
436 		tid = -atomic_read(&kgdb_active) - 2;
437 	if (tid < -1 && tid > -NR_CPUS - 2) {
438 		if (kgdb_info[-tid - 2].task)
439 			return kgdb_info[-tid - 2].task;
440 		else
441 			return idle_task(-tid - 2);
442 	}
443 	if (tid <= 0) {
444 		printk(KERN_ERR "KGDB: Internal thread select error\n");
445 		dump_stack();
446 		return NULL;
447 	}
448 
449 	/*
450 	 * find_task_by_pid_ns() does not take the tasklist lock anymore
451 	 * but is nicely RCU locked - hence is a pretty resilient
452 	 * thing to use:
453 	 */
454 	return find_task_by_pid_ns(tid, &init_pid_ns);
455 }
456 
457 
458 /*
459  * Remap normal tasks to their real PID,
460  * CPU shadow threads are mapped to -CPU - 2
461  */
462 static inline int shadow_pid(int realpid)
463 {
464 	if (realpid)
465 		return realpid;
466 
467 	return -raw_smp_processor_id() - 2;
468 }
469 
470 /*
471  * All the functions that start with gdb_cmd are the various
472  * operations to implement the handlers for the gdbserial protocol
473  * where KGDB is communicating with an external debugger
474  */
475 
476 /* Handle the '?' status packets */
477 static void gdb_cmd_status(struct kgdb_state *ks)
478 {
479 	/*
480 	 * We know that this packet is only sent
481 	 * during initial connect.  So to be safe,
482 	 * we clear out our breakpoints now in case
483 	 * GDB is reconnecting.
484 	 */
485 	dbg_remove_all_break();
486 
487 	remcom_out_buffer[0] = 'S';
488 	hex_byte_pack(&remcom_out_buffer[1], ks->signo);
489 }
490 
491 static void gdb_get_regs_helper(struct kgdb_state *ks)
492 {
493 	struct task_struct *thread;
494 	void *local_debuggerinfo;
495 	int i;
496 
497 	thread = kgdb_usethread;
498 	if (!thread) {
499 		thread = kgdb_info[ks->cpu].task;
500 		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
501 	} else {
502 		local_debuggerinfo = NULL;
503 		for_each_online_cpu(i) {
504 			/*
505 			 * Try to find the task on some other
506 			 * or possibly this node if we do not
507 			 * find the matching task then we try
508 			 * to approximate the results.
509 			 */
510 			if (thread == kgdb_info[i].task)
511 				local_debuggerinfo = kgdb_info[i].debuggerinfo;
512 		}
513 	}
514 
515 	/*
516 	 * All threads that don't have debuggerinfo should be
517 	 * in schedule() sleeping, since all other CPUs
518 	 * are in kgdb_wait, and thus have debuggerinfo.
519 	 */
520 	if (local_debuggerinfo) {
521 		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
522 	} else {
523 		/*
524 		 * Pull stuff saved during switch_to; nothing
525 		 * else is accessible (or even particularly
526 		 * relevant).
527 		 *
528 		 * This should be enough for a stack trace.
529 		 */
530 		sleeping_thread_to_gdb_regs(gdb_regs, thread);
531 	}
532 }
533 
534 /* Handle the 'g' get registers request */
535 static void gdb_cmd_getregs(struct kgdb_state *ks)
536 {
537 	gdb_get_regs_helper(ks);
538 	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
539 }
540 
541 /* Handle the 'G' set registers request */
542 static void gdb_cmd_setregs(struct kgdb_state *ks)
543 {
544 	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
545 
546 	if (kgdb_usethread && kgdb_usethread != current) {
547 		error_packet(remcom_out_buffer, -EINVAL);
548 	} else {
549 		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
550 		strcpy(remcom_out_buffer, "OK");
551 	}
552 }
553 
554 /* Handle the 'm' memory read bytes */
555 static void gdb_cmd_memread(struct kgdb_state *ks)
556 {
557 	char *ptr = &remcom_in_buffer[1];
558 	unsigned long length;
559 	unsigned long addr;
560 	char *err;
561 
562 	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
563 					kgdb_hex2long(&ptr, &length) > 0) {
564 		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
565 		if (!err)
566 			error_packet(remcom_out_buffer, -EINVAL);
567 	} else {
568 		error_packet(remcom_out_buffer, -EINVAL);
569 	}
570 }
571 
572 /* Handle the 'M' memory write bytes */
573 static void gdb_cmd_memwrite(struct kgdb_state *ks)
574 {
575 	int err = write_mem_msg(0);
576 
577 	if (err)
578 		error_packet(remcom_out_buffer, err);
579 	else
580 		strcpy(remcom_out_buffer, "OK");
581 }
582 
583 #if DBG_MAX_REG_NUM > 0
584 static char *gdb_hex_reg_helper(int regnum, char *out)
585 {
586 	int i;
587 	int offset = 0;
588 
589 	for (i = 0; i < regnum; i++)
590 		offset += dbg_reg_def[i].size;
591 	return kgdb_mem2hex((char *)gdb_regs + offset, out,
592 			    dbg_reg_def[i].size);
593 }
594 
595 /* Handle the 'p' individual register get */
596 static void gdb_cmd_reg_get(struct kgdb_state *ks)
597 {
598 	unsigned long regnum;
599 	char *ptr = &remcom_in_buffer[1];
600 
601 	kgdb_hex2long(&ptr, &regnum);
602 	if (regnum >= DBG_MAX_REG_NUM) {
603 		error_packet(remcom_out_buffer, -EINVAL);
604 		return;
605 	}
606 	gdb_get_regs_helper(ks);
607 	gdb_hex_reg_helper(regnum, remcom_out_buffer);
608 }
609 
610 /* Handle the 'P' individual register set */
611 static void gdb_cmd_reg_set(struct kgdb_state *ks)
612 {
613 	unsigned long regnum;
614 	char *ptr = &remcom_in_buffer[1];
615 	int i = 0;
616 
617 	kgdb_hex2long(&ptr, &regnum);
618 	if (*ptr++ != '=' ||
619 	    !(!kgdb_usethread || kgdb_usethread == current) ||
620 	    !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
621 		error_packet(remcom_out_buffer, -EINVAL);
622 		return;
623 	}
624 	memset(gdb_regs, 0, sizeof(gdb_regs));
625 	while (i < sizeof(gdb_regs) * 2)
626 		if (hex_to_bin(ptr[i]) >= 0)
627 			i++;
628 		else
629 			break;
630 	i = i / 2;
631 	kgdb_hex2mem(ptr, (char *)gdb_regs, i);
632 	dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
633 	strcpy(remcom_out_buffer, "OK");
634 }
635 #endif /* DBG_MAX_REG_NUM > 0 */
636 
637 /* Handle the 'X' memory binary write bytes */
638 static void gdb_cmd_binwrite(struct kgdb_state *ks)
639 {
640 	int err = write_mem_msg(1);
641 
642 	if (err)
643 		error_packet(remcom_out_buffer, err);
644 	else
645 		strcpy(remcom_out_buffer, "OK");
646 }
647 
648 /* Handle the 'D' or 'k', detach or kill packets */
649 static void gdb_cmd_detachkill(struct kgdb_state *ks)
650 {
651 	int error;
652 
653 	/* The detach case */
654 	if (remcom_in_buffer[0] == 'D') {
655 		error = dbg_remove_all_break();
656 		if (error < 0) {
657 			error_packet(remcom_out_buffer, error);
658 		} else {
659 			strcpy(remcom_out_buffer, "OK");
660 			kgdb_connected = 0;
661 		}
662 		put_packet(remcom_out_buffer);
663 	} else {
664 		/*
665 		 * Assume the kill case, with no exit code checking,
666 		 * trying to force detach the debugger:
667 		 */
668 		dbg_remove_all_break();
669 		kgdb_connected = 0;
670 	}
671 }
672 
673 /* Handle the 'R' reboot packets */
674 static int gdb_cmd_reboot(struct kgdb_state *ks)
675 {
676 	/* For now, only honor R0 */
677 	if (strcmp(remcom_in_buffer, "R0") == 0) {
678 		printk(KERN_CRIT "Executing emergency reboot\n");
679 		strcpy(remcom_out_buffer, "OK");
680 		put_packet(remcom_out_buffer);
681 
682 		/*
683 		 * Execution should not return from
684 		 * machine_emergency_restart()
685 		 */
686 		machine_emergency_restart();
687 		kgdb_connected = 0;
688 
689 		return 1;
690 	}
691 	return 0;
692 }
693 
694 /* Handle the 'q' query packets */
695 static void gdb_cmd_query(struct kgdb_state *ks)
696 {
697 	struct task_struct *g;
698 	struct task_struct *p;
699 	unsigned char thref[BUF_THREAD_ID_SIZE];
700 	char *ptr;
701 	int i;
702 	int cpu;
703 	int finished = 0;
704 
705 	switch (remcom_in_buffer[1]) {
706 	case 's':
707 	case 'f':
708 		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
709 			break;
710 
711 		i = 0;
712 		remcom_out_buffer[0] = 'm';
713 		ptr = remcom_out_buffer + 1;
714 		if (remcom_in_buffer[1] == 'f') {
715 			/* Each cpu is a shadow thread */
716 			for_each_online_cpu(cpu) {
717 				ks->thr_query = 0;
718 				int_to_threadref(thref, -cpu - 2);
719 				ptr = pack_threadid(ptr, thref);
720 				*(ptr++) = ',';
721 				i++;
722 			}
723 		}
724 
725 		for_each_process_thread(g, p) {
726 			if (i >= ks->thr_query && !finished) {
727 				int_to_threadref(thref, p->pid);
728 				ptr = pack_threadid(ptr, thref);
729 				*(ptr++) = ',';
730 				ks->thr_query++;
731 				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
732 					finished = 1;
733 			}
734 			i++;
735 		}
736 
737 		*(--ptr) = '\0';
738 		break;
739 
740 	case 'C':
741 		/* Current thread id */
742 		strcpy(remcom_out_buffer, "QC");
743 		ks->threadid = shadow_pid(current->pid);
744 		int_to_threadref(thref, ks->threadid);
745 		pack_threadid(remcom_out_buffer + 2, thref);
746 		break;
747 	case 'T':
748 		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
749 			break;
750 
751 		ks->threadid = 0;
752 		ptr = remcom_in_buffer + 17;
753 		kgdb_hex2long(&ptr, &ks->threadid);
754 		if (!getthread(ks->linux_regs, ks->threadid)) {
755 			error_packet(remcom_out_buffer, -EINVAL);
756 			break;
757 		}
758 		if ((int)ks->threadid > 0) {
759 			kgdb_mem2hex(getthread(ks->linux_regs,
760 					ks->threadid)->comm,
761 					remcom_out_buffer, 16);
762 		} else {
763 			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
764 
765 			sprintf(tmpstr, "shadowCPU%d",
766 					(int)(-ks->threadid - 2));
767 			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
768 		}
769 		break;
770 #ifdef CONFIG_KGDB_KDB
771 	case 'R':
772 		if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
773 			int len = strlen(remcom_in_buffer + 6);
774 
775 			if ((len % 2) != 0) {
776 				strcpy(remcom_out_buffer, "E01");
777 				break;
778 			}
779 			kgdb_hex2mem(remcom_in_buffer + 6,
780 				     remcom_out_buffer, len);
781 			len = len / 2;
782 			remcom_out_buffer[len++] = 0;
783 
784 			kdb_common_init_state(ks);
785 			kdb_parse(remcom_out_buffer);
786 			kdb_common_deinit_state();
787 
788 			strcpy(remcom_out_buffer, "OK");
789 		}
790 		break;
791 #endif
792 #ifdef CONFIG_HAVE_ARCH_KGDB_QXFER_PKT
793 	case 'S':
794 		if (!strncmp(remcom_in_buffer, "qSupported:", 11))
795 			strcpy(remcom_out_buffer, kgdb_arch_gdb_stub_feature);
796 		break;
797 	case 'X':
798 		if (!strncmp(remcom_in_buffer, "qXfer:", 6))
799 			kgdb_arch_handle_qxfer_pkt(remcom_in_buffer,
800 						   remcom_out_buffer);
801 		break;
802 #endif
803 	default:
804 		break;
805 	}
806 }
807 
808 /* Handle the 'H' task query packets */
809 static void gdb_cmd_task(struct kgdb_state *ks)
810 {
811 	struct task_struct *thread;
812 	char *ptr;
813 
814 	switch (remcom_in_buffer[1]) {
815 	case 'g':
816 		ptr = &remcom_in_buffer[2];
817 		kgdb_hex2long(&ptr, &ks->threadid);
818 		thread = getthread(ks->linux_regs, ks->threadid);
819 		if (!thread && ks->threadid > 0) {
820 			error_packet(remcom_out_buffer, -EINVAL);
821 			break;
822 		}
823 		kgdb_usethread = thread;
824 		ks->kgdb_usethreadid = ks->threadid;
825 		strcpy(remcom_out_buffer, "OK");
826 		break;
827 	case 'c':
828 		ptr = &remcom_in_buffer[2];
829 		kgdb_hex2long(&ptr, &ks->threadid);
830 		if (!ks->threadid) {
831 			kgdb_contthread = NULL;
832 		} else {
833 			thread = getthread(ks->linux_regs, ks->threadid);
834 			if (!thread && ks->threadid > 0) {
835 				error_packet(remcom_out_buffer, -EINVAL);
836 				break;
837 			}
838 			kgdb_contthread = thread;
839 		}
840 		strcpy(remcom_out_buffer, "OK");
841 		break;
842 	}
843 }
844 
845 /* Handle the 'T' thread query packets */
846 static void gdb_cmd_thread(struct kgdb_state *ks)
847 {
848 	char *ptr = &remcom_in_buffer[1];
849 	struct task_struct *thread;
850 
851 	kgdb_hex2long(&ptr, &ks->threadid);
852 	thread = getthread(ks->linux_regs, ks->threadid);
853 	if (thread)
854 		strcpy(remcom_out_buffer, "OK");
855 	else
856 		error_packet(remcom_out_buffer, -EINVAL);
857 }
858 
859 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
860 static void gdb_cmd_break(struct kgdb_state *ks)
861 {
862 	/*
863 	 * Since GDB-5.3, it's been drafted that '0' is a software
864 	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
865 	 */
866 	char *bpt_type = &remcom_in_buffer[1];
867 	char *ptr = &remcom_in_buffer[2];
868 	unsigned long addr;
869 	unsigned long length;
870 	int error = 0;
871 
872 	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
873 		/* Unsupported */
874 		if (*bpt_type > '4')
875 			return;
876 	} else {
877 		if (*bpt_type != '0' && *bpt_type != '1')
878 			/* Unsupported. */
879 			return;
880 	}
881 
882 	/*
883 	 * Test if this is a hardware breakpoint, and
884 	 * if we support it:
885 	 */
886 	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
887 		/* Unsupported. */
888 		return;
889 
890 	if (*(ptr++) != ',') {
891 		error_packet(remcom_out_buffer, -EINVAL);
892 		return;
893 	}
894 	if (!kgdb_hex2long(&ptr, &addr)) {
895 		error_packet(remcom_out_buffer, -EINVAL);
896 		return;
897 	}
898 	if (*(ptr++) != ',' ||
899 		!kgdb_hex2long(&ptr, &length)) {
900 		error_packet(remcom_out_buffer, -EINVAL);
901 		return;
902 	}
903 
904 	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
905 		error = dbg_set_sw_break(addr);
906 	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
907 		error = dbg_remove_sw_break(addr);
908 	else if (remcom_in_buffer[0] == 'Z')
909 		error = arch_kgdb_ops.set_hw_breakpoint(addr,
910 			(int)length, *bpt_type - '0');
911 	else if (remcom_in_buffer[0] == 'z')
912 		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
913 			(int) length, *bpt_type - '0');
914 
915 	if (error == 0)
916 		strcpy(remcom_out_buffer, "OK");
917 	else
918 		error_packet(remcom_out_buffer, error);
919 }
920 
921 /* Handle the 'C' signal / exception passing packets */
922 static int gdb_cmd_exception_pass(struct kgdb_state *ks)
923 {
924 	/* C09 == pass exception
925 	 * C15 == detach kgdb, pass exception
926 	 */
927 	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
928 
929 		ks->pass_exception = 1;
930 		remcom_in_buffer[0] = 'c';
931 
932 	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
933 
934 		ks->pass_exception = 1;
935 		remcom_in_buffer[0] = 'D';
936 		dbg_remove_all_break();
937 		kgdb_connected = 0;
938 		return 1;
939 
940 	} else {
941 		gdbstub_msg_write("KGDB only knows signal 9 (pass)"
942 			" and 15 (pass and disconnect)\n"
943 			"Executing a continue without signal passing\n", 0);
944 		remcom_in_buffer[0] = 'c';
945 	}
946 
947 	/* Indicate fall through */
948 	return -1;
949 }
950 
951 /*
952  * This function performs all gdbserial command processing
953  */
954 int gdb_serial_stub(struct kgdb_state *ks)
955 {
956 	int error = 0;
957 	int tmp;
958 
959 	/* Initialize comm buffer and globals. */
960 	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
961 	kgdb_usethread = kgdb_info[ks->cpu].task;
962 	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
963 	ks->pass_exception = 0;
964 
965 	if (kgdb_connected) {
966 		unsigned char thref[BUF_THREAD_ID_SIZE];
967 		char *ptr;
968 
969 		/* Reply to host that an exception has occurred */
970 		ptr = remcom_out_buffer;
971 		*ptr++ = 'T';
972 		ptr = hex_byte_pack(ptr, ks->signo);
973 		ptr += strlen(strcpy(ptr, "thread:"));
974 		int_to_threadref(thref, shadow_pid(current->pid));
975 		ptr = pack_threadid(ptr, thref);
976 		*ptr++ = ';';
977 		put_packet(remcom_out_buffer);
978 	}
979 
980 	while (1) {
981 		error = 0;
982 
983 		/* Clear the out buffer. */
984 		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
985 
986 		get_packet(remcom_in_buffer);
987 
988 		switch (remcom_in_buffer[0]) {
989 		case '?': /* gdbserial status */
990 			gdb_cmd_status(ks);
991 			break;
992 		case 'g': /* return the value of the CPU registers */
993 			gdb_cmd_getregs(ks);
994 			break;
995 		case 'G': /* set the value of the CPU registers - return OK */
996 			gdb_cmd_setregs(ks);
997 			break;
998 		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
999 			gdb_cmd_memread(ks);
1000 			break;
1001 		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1002 			gdb_cmd_memwrite(ks);
1003 			break;
1004 #if DBG_MAX_REG_NUM > 0
1005 		case 'p': /* pXX Return gdb register XX (in hex) */
1006 			gdb_cmd_reg_get(ks);
1007 			break;
1008 		case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
1009 			gdb_cmd_reg_set(ks);
1010 			break;
1011 #endif /* DBG_MAX_REG_NUM > 0 */
1012 		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1013 			gdb_cmd_binwrite(ks);
1014 			break;
1015 			/* kill or detach. KGDB should treat this like a
1016 			 * continue.
1017 			 */
1018 		case 'D': /* Debugger detach */
1019 		case 'k': /* Debugger detach via kill */
1020 			gdb_cmd_detachkill(ks);
1021 			goto default_handle;
1022 		case 'R': /* Reboot */
1023 			if (gdb_cmd_reboot(ks))
1024 				goto default_handle;
1025 			break;
1026 		case 'q': /* query command */
1027 			gdb_cmd_query(ks);
1028 			break;
1029 		case 'H': /* task related */
1030 			gdb_cmd_task(ks);
1031 			break;
1032 		case 'T': /* Query thread status */
1033 			gdb_cmd_thread(ks);
1034 			break;
1035 		case 'z': /* Break point remove */
1036 		case 'Z': /* Break point set */
1037 			gdb_cmd_break(ks);
1038 			break;
1039 #ifdef CONFIG_KGDB_KDB
1040 		case '3': /* Escape into back into kdb */
1041 			if (remcom_in_buffer[1] == '\0') {
1042 				gdb_cmd_detachkill(ks);
1043 				return DBG_PASS_EVENT;
1044 			}
1045 			fallthrough;
1046 #endif
1047 		case 'C': /* Exception passing */
1048 			tmp = gdb_cmd_exception_pass(ks);
1049 			if (tmp > 0)
1050 				goto default_handle;
1051 			if (tmp == 0)
1052 				break;
1053 			fallthrough;	/* on tmp < 0 */
1054 		case 'c': /* Continue packet */
1055 		case 's': /* Single step packet */
1056 			if (kgdb_contthread && kgdb_contthread != current) {
1057 				/* Can't switch threads in kgdb */
1058 				error_packet(remcom_out_buffer, -EINVAL);
1059 				break;
1060 			}
1061 			fallthrough;	/* to default processing */
1062 		default:
1063 default_handle:
1064 			error = kgdb_arch_handle_exception(ks->ex_vector,
1065 						ks->signo,
1066 						ks->err_code,
1067 						remcom_in_buffer,
1068 						remcom_out_buffer,
1069 						ks->linux_regs);
1070 			/*
1071 			 * Leave cmd processing on error, detach,
1072 			 * kill, continue, or single step.
1073 			 */
1074 			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1075 			    remcom_in_buffer[0] == 'k') {
1076 				error = 0;
1077 				goto kgdb_exit;
1078 			}
1079 
1080 		}
1081 
1082 		/* reply to the request */
1083 		put_packet(remcom_out_buffer);
1084 	}
1085 
1086 kgdb_exit:
1087 	if (ks->pass_exception)
1088 		error = 1;
1089 	return error;
1090 }
1091 
1092 int gdbstub_state(struct kgdb_state *ks, char *cmd)
1093 {
1094 	int error;
1095 
1096 	switch (cmd[0]) {
1097 	case 'e':
1098 		error = kgdb_arch_handle_exception(ks->ex_vector,
1099 						   ks->signo,
1100 						   ks->err_code,
1101 						   remcom_in_buffer,
1102 						   remcom_out_buffer,
1103 						   ks->linux_regs);
1104 		return error;
1105 	case 's':
1106 	case 'c':
1107 		strscpy(remcom_in_buffer, cmd, sizeof(remcom_in_buffer));
1108 		return 0;
1109 	case '$':
1110 		strscpy(remcom_in_buffer, cmd, sizeof(remcom_in_buffer));
1111 		gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
1112 		gdbstub_prev_in_buf_pos = 0;
1113 		return 0;
1114 	}
1115 	dbg_io_ops->write_char('+');
1116 	put_packet(remcom_out_buffer);
1117 	return 0;
1118 }
1119 
1120 /**
1121  * gdbstub_exit - Send an exit message to GDB
1122  * @status: The exit code to report.
1123  */
1124 void gdbstub_exit(int status)
1125 {
1126 	unsigned char checksum, ch, buffer[3];
1127 	int loop;
1128 
1129 	if (!kgdb_connected)
1130 		return;
1131 	kgdb_connected = 0;
1132 
1133 	if (!dbg_io_ops || dbg_kdb_mode)
1134 		return;
1135 
1136 	buffer[0] = 'W';
1137 	buffer[1] = hex_asc_hi(status);
1138 	buffer[2] = hex_asc_lo(status);
1139 
1140 	dbg_io_ops->write_char('$');
1141 	checksum = 0;
1142 
1143 	for (loop = 0; loop < 3; loop++) {
1144 		ch = buffer[loop];
1145 		checksum += ch;
1146 		dbg_io_ops->write_char(ch);
1147 	}
1148 
1149 	dbg_io_ops->write_char('#');
1150 	dbg_io_ops->write_char(hex_asc_hi(checksum));
1151 	dbg_io_ops->write_char(hex_asc_lo(checksum));
1152 
1153 	/* make sure the output is flushed, lest the bootloader clobber it */
1154 	if (dbg_io_ops->flush)
1155 		dbg_io_ops->flush();
1156 }
1157