1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * linux/init/main.c 4 * 5 * Copyright (C) 1991, 1992 Linus Torvalds 6 * 7 * GK 2/5/95 - Changed to support mounting root fs via NFS 8 * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96 9 * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96 10 * Simplified starting of init: Michael A. Griffith <grif@acm.org> 11 */ 12 13 #define DEBUG /* Enable initcall_debug */ 14 15 #include <linux/types.h> 16 #include <linux/extable.h> 17 #include <linux/module.h> 18 #include <linux/proc_fs.h> 19 #include <linux/binfmts.h> 20 #include <linux/kernel.h> 21 #include <linux/syscalls.h> 22 #include <linux/stackprotector.h> 23 #include <linux/string.h> 24 #include <linux/ctype.h> 25 #include <linux/delay.h> 26 #include <linux/ioport.h> 27 #include <linux/init.h> 28 #include <linux/initrd.h> 29 #include <linux/memblock.h> 30 #include <linux/acpi.h> 31 #include <linux/bootconfig.h> 32 #include <linux/console.h> 33 #include <linux/nmi.h> 34 #include <linux/percpu.h> 35 #include <linux/kmod.h> 36 #include <linux/kprobes.h> 37 #include <linux/kmsan.h> 38 #include <linux/vmalloc.h> 39 #include <linux/kernel_stat.h> 40 #include <linux/start_kernel.h> 41 #include <linux/security.h> 42 #include <linux/smp.h> 43 #include <linux/profile.h> 44 #include <linux/kfence.h> 45 #include <linux/rcupdate.h> 46 #include <linux/srcu.h> 47 #include <linux/moduleparam.h> 48 #include <linux/kallsyms.h> 49 #include <linux/buildid.h> 50 #include <linux/writeback.h> 51 #include <linux/cpu.h> 52 #include <linux/cpuset.h> 53 #include <linux/cgroup.h> 54 #include <linux/efi.h> 55 #include <linux/tick.h> 56 #include <linux/sched/isolation.h> 57 #include <linux/interrupt.h> 58 #include <linux/taskstats_kern.h> 59 #include <linux/delayacct.h> 60 #include <linux/unistd.h> 61 #include <linux/utsname.h> 62 #include <linux/rmap.h> 63 #include <linux/mempolicy.h> 64 #include <linux/key.h> 65 #include <linux/debug_locks.h> 66 #include <linux/debugobjects.h> 67 #include <linux/lockdep.h> 68 #include <linux/kmemleak.h> 69 #include <linux/padata.h> 70 #include <linux/pid_namespace.h> 71 #include <linux/device/driver.h> 72 #include <linux/kthread.h> 73 #include <linux/sched.h> 74 #include <linux/sched/init.h> 75 #include <linux/signal.h> 76 #include <linux/idr.h> 77 #include <linux/kgdb.h> 78 #include <linux/ftrace.h> 79 #include <linux/async.h> 80 #include <linux/shmem_fs.h> 81 #include <linux/slab.h> 82 #include <linux/perf_event.h> 83 #include <linux/ptrace.h> 84 #include <linux/pti.h> 85 #include <linux/blkdev.h> 86 #include <linux/sched/clock.h> 87 #include <linux/sched/task.h> 88 #include <linux/sched/task_stack.h> 89 #include <linux/context_tracking.h> 90 #include <linux/random.h> 91 #include <linux/moduleloader.h> 92 #include <linux/list.h> 93 #include <linux/integrity.h> 94 #include <linux/proc_ns.h> 95 #include <linux/io.h> 96 #include <linux/cache.h> 97 #include <linux/rodata_test.h> 98 #include <linux/jump_label.h> 99 #include <linux/kcsan.h> 100 #include <linux/init_syscalls.h> 101 #include <linux/stackdepot.h> 102 #include <linux/randomize_kstack.h> 103 #include <net/net_namespace.h> 104 105 #include <asm/io.h> 106 #include <asm/setup.h> 107 #include <asm/sections.h> 108 #include <asm/cacheflush.h> 109 110 #define CREATE_TRACE_POINTS 111 #include <trace/events/initcall.h> 112 113 #include <kunit/test.h> 114 115 static int kernel_init(void *); 116 117 /* 118 * Debug helper: via this flag we know that we are in 'early bootup code' 119 * where only the boot processor is running with IRQ disabled. This means 120 * two things - IRQ must not be enabled before the flag is cleared and some 121 * operations which are not allowed with IRQ disabled are allowed while the 122 * flag is set. 123 */ 124 bool early_boot_irqs_disabled __read_mostly; 125 126 enum system_states system_state __read_mostly; 127 EXPORT_SYMBOL(system_state); 128 129 /* 130 * Boot command-line arguments 131 */ 132 #define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT 133 #define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT 134 135 /* Default late time init is NULL. archs can override this later. */ 136 void (*__initdata late_time_init)(void); 137 138 /* Untouched command line saved by arch-specific code. */ 139 char __initdata boot_command_line[COMMAND_LINE_SIZE]; 140 /* Untouched saved command line (eg. for /proc) */ 141 char *saved_command_line __ro_after_init; 142 unsigned int saved_command_line_len __ro_after_init; 143 /* Command line for parameter parsing */ 144 static char *static_command_line; 145 /* Untouched extra command line */ 146 static char *extra_command_line; 147 /* Extra init arguments */ 148 static char *extra_init_args; 149 150 #ifdef CONFIG_BOOT_CONFIG 151 /* Is bootconfig on command line? */ 152 static bool bootconfig_found; 153 static size_t initargs_offs; 154 #else 155 # define bootconfig_found false 156 # define initargs_offs 0 157 #endif 158 159 static char *execute_command; 160 static char *ramdisk_execute_command = "/init"; 161 162 /* 163 * Used to generate warnings if static_key manipulation functions are used 164 * before jump_label_init is called. 165 */ 166 bool static_key_initialized __read_mostly; 167 EXPORT_SYMBOL_GPL(static_key_initialized); 168 169 /* 170 * If set, this is an indication to the drivers that reset the underlying 171 * device before going ahead with the initialization otherwise driver might 172 * rely on the BIOS and skip the reset operation. 173 * 174 * This is useful if kernel is booting in an unreliable environment. 175 * For ex. kdump situation where previous kernel has crashed, BIOS has been 176 * skipped and devices will be in unknown state. 177 */ 178 unsigned int reset_devices; 179 EXPORT_SYMBOL(reset_devices); 180 181 static int __init set_reset_devices(char *str) 182 { 183 reset_devices = 1; 184 return 1; 185 } 186 187 __setup("reset_devices", set_reset_devices); 188 189 static const char *argv_init[MAX_INIT_ARGS+2] = { "init", NULL, }; 190 const char *envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, }; 191 static const char *panic_later, *panic_param; 192 193 static bool __init obsolete_checksetup(char *line) 194 { 195 const struct obs_kernel_param *p; 196 bool had_early_param = false; 197 198 p = __setup_start; 199 do { 200 int n = strlen(p->str); 201 if (parameqn(line, p->str, n)) { 202 if (p->early) { 203 /* Already done in parse_early_param? 204 * (Needs exact match on param part). 205 * Keep iterating, as we can have early 206 * params and __setups of same names 8( */ 207 if (line[n] == '\0' || line[n] == '=') 208 had_early_param = true; 209 } else if (!p->setup_func) { 210 pr_warn("Parameter %s is obsolete, ignored\n", 211 p->str); 212 return true; 213 } else if (p->setup_func(line + n)) 214 return true; 215 } 216 p++; 217 } while (p < __setup_end); 218 219 return had_early_param; 220 } 221 222 /* 223 * This should be approx 2 Bo*oMips to start (note initial shift), and will 224 * still work even if initially too large, it will just take slightly longer 225 */ 226 unsigned long loops_per_jiffy = (1<<12); 227 EXPORT_SYMBOL(loops_per_jiffy); 228 229 static int __init debug_kernel(char *str) 230 { 231 console_loglevel = CONSOLE_LOGLEVEL_DEBUG; 232 return 0; 233 } 234 235 static int __init quiet_kernel(char *str) 236 { 237 console_loglevel = CONSOLE_LOGLEVEL_QUIET; 238 return 0; 239 } 240 241 early_param("debug", debug_kernel); 242 early_param("quiet", quiet_kernel); 243 244 static int __init loglevel(char *str) 245 { 246 int newlevel; 247 248 /* 249 * Only update loglevel value when a correct setting was passed, 250 * to prevent blind crashes (when loglevel being set to 0) that 251 * are quite hard to debug 252 */ 253 if (get_option(&str, &newlevel)) { 254 console_loglevel = newlevel; 255 return 0; 256 } 257 258 return -EINVAL; 259 } 260 261 early_param("loglevel", loglevel); 262 263 #ifdef CONFIG_BLK_DEV_INITRD 264 static void * __init get_boot_config_from_initrd(size_t *_size) 265 { 266 u32 size, csum; 267 char *data; 268 u32 *hdr; 269 int i; 270 271 if (!initrd_end) 272 return NULL; 273 274 data = (char *)initrd_end - BOOTCONFIG_MAGIC_LEN; 275 /* 276 * Since Grub may align the size of initrd to 4, we must 277 * check the preceding 3 bytes as well. 278 */ 279 for (i = 0; i < 4; i++) { 280 if (!memcmp(data, BOOTCONFIG_MAGIC, BOOTCONFIG_MAGIC_LEN)) 281 goto found; 282 data--; 283 } 284 return NULL; 285 286 found: 287 hdr = (u32 *)(data - 8); 288 size = le32_to_cpu(hdr[0]); 289 csum = le32_to_cpu(hdr[1]); 290 291 data = ((void *)hdr) - size; 292 if ((unsigned long)data < initrd_start) { 293 pr_err("bootconfig size %d is greater than initrd size %ld\n", 294 size, initrd_end - initrd_start); 295 return NULL; 296 } 297 298 if (xbc_calc_checksum(data, size) != csum) { 299 pr_err("bootconfig checksum failed\n"); 300 return NULL; 301 } 302 303 /* Remove bootconfig from initramfs/initrd */ 304 initrd_end = (unsigned long)data; 305 if (_size) 306 *_size = size; 307 308 return data; 309 } 310 #else 311 static void * __init get_boot_config_from_initrd(size_t *_size) 312 { 313 return NULL; 314 } 315 #endif 316 317 #ifdef CONFIG_BOOT_CONFIG 318 319 static char xbc_namebuf[XBC_KEYLEN_MAX] __initdata; 320 321 #define rest(dst, end) ((end) > (dst) ? (end) - (dst) : 0) 322 323 static int __init xbc_snprint_cmdline(char *buf, size_t size, 324 struct xbc_node *root) 325 { 326 struct xbc_node *knode, *vnode; 327 char *end = buf + size; 328 const char *val; 329 int ret; 330 331 xbc_node_for_each_key_value(root, knode, val) { 332 ret = xbc_node_compose_key_after(root, knode, 333 xbc_namebuf, XBC_KEYLEN_MAX); 334 if (ret < 0) 335 return ret; 336 337 vnode = xbc_node_get_child(knode); 338 if (!vnode) { 339 ret = snprintf(buf, rest(buf, end), "%s ", xbc_namebuf); 340 if (ret < 0) 341 return ret; 342 buf += ret; 343 continue; 344 } 345 xbc_array_for_each_value(vnode, val) { 346 ret = snprintf(buf, rest(buf, end), "%s=\"%s\" ", 347 xbc_namebuf, val); 348 if (ret < 0) 349 return ret; 350 buf += ret; 351 } 352 } 353 354 return buf - (end - size); 355 } 356 #undef rest 357 358 /* Make an extra command line under given key word */ 359 static char * __init xbc_make_cmdline(const char *key) 360 { 361 struct xbc_node *root; 362 char *new_cmdline; 363 int ret, len = 0; 364 365 root = xbc_find_node(key); 366 if (!root) 367 return NULL; 368 369 /* Count required buffer size */ 370 len = xbc_snprint_cmdline(NULL, 0, root); 371 if (len <= 0) 372 return NULL; 373 374 new_cmdline = memblock_alloc(len + 1, SMP_CACHE_BYTES); 375 if (!new_cmdline) { 376 pr_err("Failed to allocate memory for extra kernel cmdline.\n"); 377 return NULL; 378 } 379 380 ret = xbc_snprint_cmdline(new_cmdline, len + 1, root); 381 if (ret < 0 || ret > len) { 382 pr_err("Failed to print extra kernel cmdline.\n"); 383 memblock_free(new_cmdline, len + 1); 384 return NULL; 385 } 386 387 return new_cmdline; 388 } 389 390 static int __init bootconfig_params(char *param, char *val, 391 const char *unused, void *arg) 392 { 393 if (strcmp(param, "bootconfig") == 0) { 394 bootconfig_found = true; 395 } 396 return 0; 397 } 398 399 static int __init warn_bootconfig(char *str) 400 { 401 /* The 'bootconfig' has been handled by bootconfig_params(). */ 402 return 0; 403 } 404 405 static void __init setup_boot_config(void) 406 { 407 static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata; 408 const char *msg, *data; 409 int pos, ret; 410 size_t size; 411 char *err; 412 413 /* Cut out the bootconfig data even if we have no bootconfig option */ 414 data = get_boot_config_from_initrd(&size); 415 /* If there is no bootconfig in initrd, try embedded one. */ 416 if (!data) 417 data = xbc_get_embedded_bootconfig(&size); 418 419 strscpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); 420 err = parse_args("bootconfig", tmp_cmdline, NULL, 0, 0, 0, NULL, 421 bootconfig_params); 422 423 if (IS_ERR(err) || !(bootconfig_found || IS_ENABLED(CONFIG_BOOT_CONFIG_FORCE))) 424 return; 425 426 /* parse_args() stops at the next param of '--' and returns an address */ 427 if (err) 428 initargs_offs = err - tmp_cmdline; 429 430 if (!data) { 431 /* If user intended to use bootconfig, show an error level message */ 432 if (bootconfig_found) 433 pr_err("'bootconfig' found on command line, but no bootconfig found\n"); 434 else 435 pr_info("No bootconfig data provided, so skipping bootconfig"); 436 return; 437 } 438 439 if (size >= XBC_DATA_MAX) { 440 pr_err("bootconfig size %ld greater than max size %d\n", 441 (long)size, XBC_DATA_MAX); 442 return; 443 } 444 445 ret = xbc_init(data, size, &msg, &pos); 446 if (ret < 0) { 447 if (pos < 0) 448 pr_err("Failed to init bootconfig: %s.\n", msg); 449 else 450 pr_err("Failed to parse bootconfig: %s at %d.\n", 451 msg, pos); 452 } else { 453 xbc_get_info(&ret, NULL); 454 pr_info("Load bootconfig: %ld bytes %d nodes\n", (long)size, ret); 455 /* keys starting with "kernel." are passed via cmdline */ 456 extra_command_line = xbc_make_cmdline("kernel"); 457 /* Also, "init." keys are init arguments */ 458 extra_init_args = xbc_make_cmdline("init"); 459 } 460 return; 461 } 462 463 static void __init exit_boot_config(void) 464 { 465 xbc_exit(); 466 } 467 468 #else /* !CONFIG_BOOT_CONFIG */ 469 470 static void __init setup_boot_config(void) 471 { 472 /* Remove bootconfig data from initrd */ 473 get_boot_config_from_initrd(NULL); 474 } 475 476 static int __init warn_bootconfig(char *str) 477 { 478 pr_warn("WARNING: 'bootconfig' found on the kernel command line but CONFIG_BOOT_CONFIG is not set.\n"); 479 return 0; 480 } 481 482 #define exit_boot_config() do {} while (0) 483 484 #endif /* CONFIG_BOOT_CONFIG */ 485 486 early_param("bootconfig", warn_bootconfig); 487 488 /* Change NUL term back to "=", to make "param" the whole string. */ 489 static void __init repair_env_string(char *param, char *val) 490 { 491 if (val) { 492 /* param=val or param="val"? */ 493 if (val == param+strlen(param)+1) 494 val[-1] = '='; 495 else if (val == param+strlen(param)+2) { 496 val[-2] = '='; 497 memmove(val-1, val, strlen(val)+1); 498 } else 499 BUG(); 500 } 501 } 502 503 /* Anything after -- gets handed straight to init. */ 504 static int __init set_init_arg(char *param, char *val, 505 const char *unused, void *arg) 506 { 507 unsigned int i; 508 509 if (panic_later) 510 return 0; 511 512 repair_env_string(param, val); 513 514 for (i = 0; argv_init[i]; i++) { 515 if (i == MAX_INIT_ARGS) { 516 panic_later = "init"; 517 panic_param = param; 518 return 0; 519 } 520 } 521 argv_init[i] = param; 522 return 0; 523 } 524 525 /* 526 * Unknown boot options get handed to init, unless they look like 527 * unused parameters (modprobe will find them in /proc/cmdline). 528 */ 529 static int __init unknown_bootoption(char *param, char *val, 530 const char *unused, void *arg) 531 { 532 size_t len = strlen(param); 533 534 /* Handle params aliased to sysctls */ 535 if (sysctl_is_alias(param)) 536 return 0; 537 538 repair_env_string(param, val); 539 540 /* Handle obsolete-style parameters */ 541 if (obsolete_checksetup(param)) 542 return 0; 543 544 /* Unused module parameter. */ 545 if (strnchr(param, len, '.')) 546 return 0; 547 548 if (panic_later) 549 return 0; 550 551 if (val) { 552 /* Environment option */ 553 unsigned int i; 554 for (i = 0; envp_init[i]; i++) { 555 if (i == MAX_INIT_ENVS) { 556 panic_later = "env"; 557 panic_param = param; 558 } 559 if (!strncmp(param, envp_init[i], len+1)) 560 break; 561 } 562 envp_init[i] = param; 563 } else { 564 /* Command line option */ 565 unsigned int i; 566 for (i = 0; argv_init[i]; i++) { 567 if (i == MAX_INIT_ARGS) { 568 panic_later = "init"; 569 panic_param = param; 570 } 571 } 572 argv_init[i] = param; 573 } 574 return 0; 575 } 576 577 static int __init init_setup(char *str) 578 { 579 unsigned int i; 580 581 execute_command = str; 582 /* 583 * In case LILO is going to boot us with default command line, 584 * it prepends "auto" before the whole cmdline which makes 585 * the shell think it should execute a script with such name. 586 * So we ignore all arguments entered _before_ init=... [MJ] 587 */ 588 for (i = 1; i < MAX_INIT_ARGS; i++) 589 argv_init[i] = NULL; 590 return 1; 591 } 592 __setup("init=", init_setup); 593 594 static int __init rdinit_setup(char *str) 595 { 596 unsigned int i; 597 598 ramdisk_execute_command = str; 599 /* See "auto" comment in init_setup */ 600 for (i = 1; i < MAX_INIT_ARGS; i++) 601 argv_init[i] = NULL; 602 return 1; 603 } 604 __setup("rdinit=", rdinit_setup); 605 606 #ifndef CONFIG_SMP 607 static const unsigned int setup_max_cpus = NR_CPUS; 608 static inline void setup_nr_cpu_ids(void) { } 609 static inline void smp_prepare_cpus(unsigned int maxcpus) { } 610 #endif 611 612 /* 613 * We need to store the untouched command line for future reference. 614 * We also need to store the touched command line since the parameter 615 * parsing is performed in place, and we should allow a component to 616 * store reference of name/value for future reference. 617 */ 618 static void __init setup_command_line(char *command_line) 619 { 620 size_t len, xlen = 0, ilen = 0; 621 622 if (extra_command_line) 623 xlen = strlen(extra_command_line); 624 if (extra_init_args) 625 ilen = strlen(extra_init_args) + 4; /* for " -- " */ 626 627 len = xlen + strlen(boot_command_line) + 1; 628 629 saved_command_line = memblock_alloc(len + ilen, SMP_CACHE_BYTES); 630 if (!saved_command_line) 631 panic("%s: Failed to allocate %zu bytes\n", __func__, len + ilen); 632 633 len = xlen + strlen(command_line) + 1; 634 635 static_command_line = memblock_alloc(len, SMP_CACHE_BYTES); 636 if (!static_command_line) 637 panic("%s: Failed to allocate %zu bytes\n", __func__, len); 638 639 if (xlen) { 640 /* 641 * We have to put extra_command_line before boot command 642 * lines because there could be dashes (separator of init 643 * command line) in the command lines. 644 */ 645 strcpy(saved_command_line, extra_command_line); 646 strcpy(static_command_line, extra_command_line); 647 } 648 strcpy(saved_command_line + xlen, boot_command_line); 649 strcpy(static_command_line + xlen, command_line); 650 651 if (ilen) { 652 /* 653 * Append supplemental init boot args to saved_command_line 654 * so that user can check what command line options passed 655 * to init. 656 * The order should always be 657 * " -- "[bootconfig init-param][cmdline init-param] 658 */ 659 if (initargs_offs) { 660 len = xlen + initargs_offs; 661 strcpy(saved_command_line + len, extra_init_args); 662 len += ilen - 4; /* strlen(extra_init_args) */ 663 strcpy(saved_command_line + len, 664 boot_command_line + initargs_offs - 1); 665 } else { 666 len = strlen(saved_command_line); 667 strcpy(saved_command_line + len, " -- "); 668 len += 4; 669 strcpy(saved_command_line + len, extra_init_args); 670 } 671 } 672 673 saved_command_line_len = strlen(saved_command_line); 674 } 675 676 /* 677 * We need to finalize in a non-__init function or else race conditions 678 * between the root thread and the init thread may cause start_kernel to 679 * be reaped by free_initmem before the root thread has proceeded to 680 * cpu_idle. 681 * 682 * gcc-3.4 accidentally inlines this function, so use noinline. 683 */ 684 685 static __initdata DECLARE_COMPLETION(kthreadd_done); 686 687 noinline void __ref __noreturn rest_init(void) 688 { 689 struct task_struct *tsk; 690 int pid; 691 692 rcu_scheduler_starting(); 693 /* 694 * We need to spawn init first so that it obtains pid 1, however 695 * the init task will end up wanting to create kthreads, which, if 696 * we schedule it before we create kthreadd, will OOPS. 697 */ 698 pid = user_mode_thread(kernel_init, NULL, CLONE_FS); 699 /* 700 * Pin init on the boot CPU. Task migration is not properly working 701 * until sched_init_smp() has been run. It will set the allowed 702 * CPUs for init to the non isolated CPUs. 703 */ 704 rcu_read_lock(); 705 tsk = find_task_by_pid_ns(pid, &init_pid_ns); 706 tsk->flags |= PF_NO_SETAFFINITY; 707 set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); 708 rcu_read_unlock(); 709 710 numa_default_policy(); 711 pid = kernel_thread(kthreadd, NULL, NULL, CLONE_FS | CLONE_FILES); 712 rcu_read_lock(); 713 kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns); 714 rcu_read_unlock(); 715 716 /* 717 * Enable might_sleep() and smp_processor_id() checks. 718 * They cannot be enabled earlier because with CONFIG_PREEMPTION=y 719 * kernel_thread() would trigger might_sleep() splats. With 720 * CONFIG_PREEMPT_VOLUNTARY=y the init task might have scheduled 721 * already, but it's stuck on the kthreadd_done completion. 722 */ 723 system_state = SYSTEM_SCHEDULING; 724 725 complete(&kthreadd_done); 726 727 /* 728 * The boot idle thread must execute schedule() 729 * at least once to get things moving: 730 */ 731 schedule_preempt_disabled(); 732 /* Call into cpu_idle with preempt disabled */ 733 cpu_startup_entry(CPUHP_ONLINE); 734 } 735 736 /* Check for early params. */ 737 static int __init do_early_param(char *param, char *val, 738 const char *unused, void *arg) 739 { 740 const struct obs_kernel_param *p; 741 742 for (p = __setup_start; p < __setup_end; p++) { 743 if ((p->early && parameq(param, p->str)) || 744 (strcmp(param, "console") == 0 && 745 strcmp(p->str, "earlycon") == 0) 746 ) { 747 if (p->setup_func(val) != 0) 748 pr_warn("Malformed early option '%s'\n", param); 749 } 750 } 751 /* We accept everything at this stage. */ 752 return 0; 753 } 754 755 void __init parse_early_options(char *cmdline) 756 { 757 parse_args("early options", cmdline, NULL, 0, 0, 0, NULL, 758 do_early_param); 759 } 760 761 /* Arch code calls this early on, or if not, just before other parsing. */ 762 void __init parse_early_param(void) 763 { 764 static int done __initdata; 765 static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata; 766 767 if (done) 768 return; 769 770 /* All fall through to do_early_param. */ 771 strscpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); 772 parse_early_options(tmp_cmdline); 773 done = 1; 774 } 775 776 void __init __weak arch_post_acpi_subsys_init(void) { } 777 778 void __init __weak smp_setup_processor_id(void) 779 { 780 } 781 782 # if THREAD_SIZE >= PAGE_SIZE 783 void __init __weak thread_stack_cache_init(void) 784 { 785 } 786 #endif 787 788 void __init __weak poking_init(void) { } 789 790 void __init __weak pgtable_cache_init(void) { } 791 792 void __init __weak trap_init(void) { } 793 794 bool initcall_debug; 795 core_param(initcall_debug, initcall_debug, bool, 0644); 796 797 #ifdef TRACEPOINTS_ENABLED 798 static void __init initcall_debug_enable(void); 799 #else 800 static inline void initcall_debug_enable(void) 801 { 802 } 803 #endif 804 805 #ifdef CONFIG_RANDOMIZE_KSTACK_OFFSET 806 DEFINE_STATIC_KEY_MAYBE_RO(CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT, 807 randomize_kstack_offset); 808 DEFINE_PER_CPU(u32, kstack_offset); 809 810 static int __init early_randomize_kstack_offset(char *buf) 811 { 812 int ret; 813 bool bool_result; 814 815 ret = kstrtobool(buf, &bool_result); 816 if (ret) 817 return ret; 818 819 if (bool_result) 820 static_branch_enable(&randomize_kstack_offset); 821 else 822 static_branch_disable(&randomize_kstack_offset); 823 return 0; 824 } 825 early_param("randomize_kstack_offset", early_randomize_kstack_offset); 826 #endif 827 828 void __init __weak __noreturn arch_call_rest_init(void) 829 { 830 rest_init(); 831 } 832 833 static void __init print_unknown_bootoptions(void) 834 { 835 char *unknown_options; 836 char *end; 837 const char *const *p; 838 size_t len; 839 840 if (panic_later || (!argv_init[1] && !envp_init[2])) 841 return; 842 843 /* 844 * Determine how many options we have to print out, plus a space 845 * before each 846 */ 847 len = 1; /* null terminator */ 848 for (p = &argv_init[1]; *p; p++) { 849 len++; 850 len += strlen(*p); 851 } 852 for (p = &envp_init[2]; *p; p++) { 853 len++; 854 len += strlen(*p); 855 } 856 857 unknown_options = memblock_alloc(len, SMP_CACHE_BYTES); 858 if (!unknown_options) { 859 pr_err("%s: Failed to allocate %zu bytes\n", 860 __func__, len); 861 return; 862 } 863 end = unknown_options; 864 865 for (p = &argv_init[1]; *p; p++) 866 end += sprintf(end, " %s", *p); 867 for (p = &envp_init[2]; *p; p++) 868 end += sprintf(end, " %s", *p); 869 870 /* Start at unknown_options[1] to skip the initial space */ 871 pr_notice("Unknown kernel command line parameters \"%s\", will be passed to user space.\n", 872 &unknown_options[1]); 873 memblock_free(unknown_options, len); 874 } 875 876 asmlinkage __visible __init __no_sanitize_address __noreturn __no_stack_protector 877 void start_kernel(void) 878 { 879 char *command_line; 880 char *after_dashes; 881 882 set_task_stack_end_magic(&init_task); 883 smp_setup_processor_id(); 884 debug_objects_early_init(); 885 init_vmlinux_build_id(); 886 887 cgroup_init_early(); 888 889 local_irq_disable(); 890 early_boot_irqs_disabled = true; 891 892 /* 893 * Interrupts are still disabled. Do necessary setups, then 894 * enable them. 895 */ 896 boot_cpu_init(); 897 page_address_init(); 898 pr_notice("%s", linux_banner); 899 early_security_init(); 900 setup_arch(&command_line); 901 setup_boot_config(); 902 setup_command_line(command_line); 903 setup_nr_cpu_ids(); 904 setup_per_cpu_areas(); 905 smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */ 906 boot_cpu_hotplug_init(); 907 908 pr_notice("Kernel command line: %s\n", saved_command_line); 909 /* parameters may set static keys */ 910 jump_label_init(); 911 parse_early_param(); 912 after_dashes = parse_args("Booting kernel", 913 static_command_line, __start___param, 914 __stop___param - __start___param, 915 -1, -1, NULL, &unknown_bootoption); 916 print_unknown_bootoptions(); 917 if (!IS_ERR_OR_NULL(after_dashes)) 918 parse_args("Setting init args", after_dashes, NULL, 0, -1, -1, 919 NULL, set_init_arg); 920 if (extra_init_args) 921 parse_args("Setting extra init args", extra_init_args, 922 NULL, 0, -1, -1, NULL, set_init_arg); 923 924 /* Architectural and non-timekeeping rng init, before allocator init */ 925 random_init_early(command_line); 926 927 /* 928 * These use large bootmem allocations and must precede 929 * initalization of page allocator 930 */ 931 setup_log_buf(0); 932 vfs_caches_init_early(); 933 sort_main_extable(); 934 trap_init(); 935 mm_core_init(); 936 poking_init(); 937 ftrace_init(); 938 939 /* trace_printk can be enabled here */ 940 early_trace_init(); 941 942 /* 943 * Set up the scheduler prior starting any interrupts (such as the 944 * timer interrupt). Full topology setup happens at smp_init() 945 * time - but meanwhile we still have a functioning scheduler. 946 */ 947 sched_init(); 948 949 if (WARN(!irqs_disabled(), 950 "Interrupts were enabled *very* early, fixing it\n")) 951 local_irq_disable(); 952 radix_tree_init(); 953 maple_tree_init(); 954 955 /* 956 * Set up housekeeping before setting up workqueues to allow the unbound 957 * workqueue to take non-housekeeping into account. 958 */ 959 housekeeping_init(); 960 961 /* 962 * Allow workqueue creation and work item queueing/cancelling 963 * early. Work item execution depends on kthreads and starts after 964 * workqueue_init(). 965 */ 966 workqueue_init_early(); 967 968 rcu_init(); 969 970 /* Trace events are available after this */ 971 trace_init(); 972 973 if (initcall_debug) 974 initcall_debug_enable(); 975 976 context_tracking_init(); 977 /* init some links before init_ISA_irqs() */ 978 early_irq_init(); 979 init_IRQ(); 980 tick_init(); 981 rcu_init_nohz(); 982 init_timers(); 983 srcu_init(); 984 hrtimers_init(); 985 softirq_init(); 986 timekeeping_init(); 987 time_init(); 988 989 /* This must be after timekeeping is initialized */ 990 random_init(); 991 992 /* These make use of the fully initialized rng */ 993 kfence_init(); 994 boot_init_stack_canary(); 995 996 perf_event_init(); 997 profile_init(); 998 call_function_init(); 999 WARN(!irqs_disabled(), "Interrupts were enabled early\n"); 1000 1001 early_boot_irqs_disabled = false; 1002 local_irq_enable(); 1003 1004 kmem_cache_init_late(); 1005 1006 /* 1007 * HACK ALERT! This is early. We're enabling the console before 1008 * we've done PCI setups etc, and console_init() must be aware of 1009 * this. But we do want output early, in case something goes wrong. 1010 */ 1011 console_init(); 1012 if (panic_later) 1013 panic("Too many boot %s vars at `%s'", panic_later, 1014 panic_param); 1015 1016 lockdep_init(); 1017 1018 /* 1019 * Need to run this when irqs are enabled, because it wants 1020 * to self-test [hard/soft]-irqs on/off lock inversion bugs 1021 * too: 1022 */ 1023 locking_selftest(); 1024 1025 #ifdef CONFIG_BLK_DEV_INITRD 1026 if (initrd_start && !initrd_below_start_ok && 1027 page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) { 1028 pr_crit("initrd overwritten (0x%08lx < 0x%08lx) - disabling it.\n", 1029 page_to_pfn(virt_to_page((void *)initrd_start)), 1030 min_low_pfn); 1031 initrd_start = 0; 1032 } 1033 #endif 1034 setup_per_cpu_pageset(); 1035 numa_policy_init(); 1036 acpi_early_init(); 1037 if (late_time_init) 1038 late_time_init(); 1039 sched_clock_init(); 1040 calibrate_delay(); 1041 1042 arch_cpu_finalize_init(); 1043 1044 pid_idr_init(); 1045 anon_vma_init(); 1046 #ifdef CONFIG_X86 1047 if (efi_enabled(EFI_RUNTIME_SERVICES)) 1048 efi_enter_virtual_mode(); 1049 #endif 1050 thread_stack_cache_init(); 1051 cred_init(); 1052 fork_init(); 1053 proc_caches_init(); 1054 uts_ns_init(); 1055 key_init(); 1056 security_init(); 1057 dbg_late_init(); 1058 net_ns_init(); 1059 vfs_caches_init(); 1060 pagecache_init(); 1061 signals_init(); 1062 seq_file_init(); 1063 proc_root_init(); 1064 nsfs_init(); 1065 cpuset_init(); 1066 cgroup_init(); 1067 taskstats_init_early(); 1068 delayacct_init(); 1069 1070 acpi_subsystem_init(); 1071 arch_post_acpi_subsys_init(); 1072 kcsan_init(); 1073 1074 /* Do the rest non-__init'ed, we're now alive */ 1075 arch_call_rest_init(); 1076 1077 /* 1078 * Avoid stack canaries in callers of boot_init_stack_canary for gcc-10 1079 * and older. 1080 */ 1081 #if !__has_attribute(__no_stack_protector__) 1082 prevent_tail_call_optimization(); 1083 #endif 1084 } 1085 1086 /* Call all constructor functions linked into the kernel. */ 1087 static void __init do_ctors(void) 1088 { 1089 /* 1090 * For UML, the constructors have already been called by the 1091 * normal setup code as it's just a normal ELF binary, so we 1092 * cannot do it again - but we do need CONFIG_CONSTRUCTORS 1093 * even on UML for modules. 1094 */ 1095 #if defined(CONFIG_CONSTRUCTORS) && !defined(CONFIG_UML) 1096 ctor_fn_t *fn = (ctor_fn_t *) __ctors_start; 1097 1098 for (; fn < (ctor_fn_t *) __ctors_end; fn++) 1099 (*fn)(); 1100 #endif 1101 } 1102 1103 #ifdef CONFIG_KALLSYMS 1104 struct blacklist_entry { 1105 struct list_head next; 1106 char *buf; 1107 }; 1108 1109 static __initdata_or_module LIST_HEAD(blacklisted_initcalls); 1110 1111 static int __init initcall_blacklist(char *str) 1112 { 1113 char *str_entry; 1114 struct blacklist_entry *entry; 1115 1116 /* str argument is a comma-separated list of functions */ 1117 do { 1118 str_entry = strsep(&str, ","); 1119 if (str_entry) { 1120 pr_debug("blacklisting initcall %s\n", str_entry); 1121 entry = memblock_alloc(sizeof(*entry), 1122 SMP_CACHE_BYTES); 1123 if (!entry) 1124 panic("%s: Failed to allocate %zu bytes\n", 1125 __func__, sizeof(*entry)); 1126 entry->buf = memblock_alloc(strlen(str_entry) + 1, 1127 SMP_CACHE_BYTES); 1128 if (!entry->buf) 1129 panic("%s: Failed to allocate %zu bytes\n", 1130 __func__, strlen(str_entry) + 1); 1131 strcpy(entry->buf, str_entry); 1132 list_add(&entry->next, &blacklisted_initcalls); 1133 } 1134 } while (str_entry); 1135 1136 return 1; 1137 } 1138 1139 static bool __init_or_module initcall_blacklisted(initcall_t fn) 1140 { 1141 struct blacklist_entry *entry; 1142 char fn_name[KSYM_SYMBOL_LEN]; 1143 unsigned long addr; 1144 1145 if (list_empty(&blacklisted_initcalls)) 1146 return false; 1147 1148 addr = (unsigned long) dereference_function_descriptor(fn); 1149 sprint_symbol_no_offset(fn_name, addr); 1150 1151 /* 1152 * fn will be "function_name [module_name]" where [module_name] is not 1153 * displayed for built-in init functions. Strip off the [module_name]. 1154 */ 1155 strreplace(fn_name, ' ', '\0'); 1156 1157 list_for_each_entry(entry, &blacklisted_initcalls, next) { 1158 if (!strcmp(fn_name, entry->buf)) { 1159 pr_debug("initcall %s blacklisted\n", fn_name); 1160 return true; 1161 } 1162 } 1163 1164 return false; 1165 } 1166 #else 1167 static int __init initcall_blacklist(char *str) 1168 { 1169 pr_warn("initcall_blacklist requires CONFIG_KALLSYMS\n"); 1170 return 0; 1171 } 1172 1173 static bool __init_or_module initcall_blacklisted(initcall_t fn) 1174 { 1175 return false; 1176 } 1177 #endif 1178 __setup("initcall_blacklist=", initcall_blacklist); 1179 1180 static __init_or_module void 1181 trace_initcall_start_cb(void *data, initcall_t fn) 1182 { 1183 ktime_t *calltime = data; 1184 1185 printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current)); 1186 *calltime = ktime_get(); 1187 } 1188 1189 static __init_or_module void 1190 trace_initcall_finish_cb(void *data, initcall_t fn, int ret) 1191 { 1192 ktime_t rettime, *calltime = data; 1193 1194 rettime = ktime_get(); 1195 printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n", 1196 fn, ret, (unsigned long long)ktime_us_delta(rettime, *calltime)); 1197 } 1198 1199 static ktime_t initcall_calltime; 1200 1201 #ifdef TRACEPOINTS_ENABLED 1202 static void __init initcall_debug_enable(void) 1203 { 1204 int ret; 1205 1206 ret = register_trace_initcall_start(trace_initcall_start_cb, 1207 &initcall_calltime); 1208 ret |= register_trace_initcall_finish(trace_initcall_finish_cb, 1209 &initcall_calltime); 1210 WARN(ret, "Failed to register initcall tracepoints\n"); 1211 } 1212 # define do_trace_initcall_start trace_initcall_start 1213 # define do_trace_initcall_finish trace_initcall_finish 1214 #else 1215 static inline void do_trace_initcall_start(initcall_t fn) 1216 { 1217 if (!initcall_debug) 1218 return; 1219 trace_initcall_start_cb(&initcall_calltime, fn); 1220 } 1221 static inline void do_trace_initcall_finish(initcall_t fn, int ret) 1222 { 1223 if (!initcall_debug) 1224 return; 1225 trace_initcall_finish_cb(&initcall_calltime, fn, ret); 1226 } 1227 #endif /* !TRACEPOINTS_ENABLED */ 1228 1229 int __init_or_module do_one_initcall(initcall_t fn) 1230 { 1231 int count = preempt_count(); 1232 char msgbuf[64]; 1233 int ret; 1234 1235 if (initcall_blacklisted(fn)) 1236 return -EPERM; 1237 1238 do_trace_initcall_start(fn); 1239 ret = fn(); 1240 do_trace_initcall_finish(fn, ret); 1241 1242 msgbuf[0] = 0; 1243 1244 if (preempt_count() != count) { 1245 sprintf(msgbuf, "preemption imbalance "); 1246 preempt_count_set(count); 1247 } 1248 if (irqs_disabled()) { 1249 strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf)); 1250 local_irq_enable(); 1251 } 1252 WARN(msgbuf[0], "initcall %pS returned with %s\n", fn, msgbuf); 1253 1254 add_latent_entropy(); 1255 return ret; 1256 } 1257 1258 1259 static initcall_entry_t *initcall_levels[] __initdata = { 1260 __initcall0_start, 1261 __initcall1_start, 1262 __initcall2_start, 1263 __initcall3_start, 1264 __initcall4_start, 1265 __initcall5_start, 1266 __initcall6_start, 1267 __initcall7_start, 1268 __initcall_end, 1269 }; 1270 1271 /* Keep these in sync with initcalls in include/linux/init.h */ 1272 static const char *initcall_level_names[] __initdata = { 1273 "pure", 1274 "core", 1275 "postcore", 1276 "arch", 1277 "subsys", 1278 "fs", 1279 "device", 1280 "late", 1281 }; 1282 1283 static int __init ignore_unknown_bootoption(char *param, char *val, 1284 const char *unused, void *arg) 1285 { 1286 return 0; 1287 } 1288 1289 static void __init do_initcall_level(int level, char *command_line) 1290 { 1291 initcall_entry_t *fn; 1292 1293 parse_args(initcall_level_names[level], 1294 command_line, __start___param, 1295 __stop___param - __start___param, 1296 level, level, 1297 NULL, ignore_unknown_bootoption); 1298 1299 trace_initcall_level(initcall_level_names[level]); 1300 for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++) 1301 do_one_initcall(initcall_from_entry(fn)); 1302 } 1303 1304 static void __init do_initcalls(void) 1305 { 1306 int level; 1307 size_t len = saved_command_line_len + 1; 1308 char *command_line; 1309 1310 command_line = kzalloc(len, GFP_KERNEL); 1311 if (!command_line) 1312 panic("%s: Failed to allocate %zu bytes\n", __func__, len); 1313 1314 for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++) { 1315 /* Parser modifies command_line, restore it each time */ 1316 strcpy(command_line, saved_command_line); 1317 do_initcall_level(level, command_line); 1318 } 1319 1320 kfree(command_line); 1321 } 1322 1323 /* 1324 * Ok, the machine is now initialized. None of the devices 1325 * have been touched yet, but the CPU subsystem is up and 1326 * running, and memory and process management works. 1327 * 1328 * Now we can finally start doing some real work.. 1329 */ 1330 static void __init do_basic_setup(void) 1331 { 1332 cpuset_init_smp(); 1333 driver_init(); 1334 init_irq_proc(); 1335 do_ctors(); 1336 do_initcalls(); 1337 } 1338 1339 static void __init do_pre_smp_initcalls(void) 1340 { 1341 initcall_entry_t *fn; 1342 1343 trace_initcall_level("early"); 1344 for (fn = __initcall_start; fn < __initcall0_start; fn++) 1345 do_one_initcall(initcall_from_entry(fn)); 1346 } 1347 1348 static int run_init_process(const char *init_filename) 1349 { 1350 const char *const *p; 1351 1352 argv_init[0] = init_filename; 1353 pr_info("Run %s as init process\n", init_filename); 1354 pr_debug(" with arguments:\n"); 1355 for (p = argv_init; *p; p++) 1356 pr_debug(" %s\n", *p); 1357 pr_debug(" with environment:\n"); 1358 for (p = envp_init; *p; p++) 1359 pr_debug(" %s\n", *p); 1360 return kernel_execve(init_filename, argv_init, envp_init); 1361 } 1362 1363 static int try_to_run_init_process(const char *init_filename) 1364 { 1365 int ret; 1366 1367 ret = run_init_process(init_filename); 1368 1369 if (ret && ret != -ENOENT) { 1370 pr_err("Starting init: %s exists but couldn't execute it (error %d)\n", 1371 init_filename, ret); 1372 } 1373 1374 return ret; 1375 } 1376 1377 static noinline void __init kernel_init_freeable(void); 1378 1379 #if defined(CONFIG_STRICT_KERNEL_RWX) || defined(CONFIG_STRICT_MODULE_RWX) 1380 bool rodata_enabled __ro_after_init = true; 1381 1382 #ifndef arch_parse_debug_rodata 1383 static inline bool arch_parse_debug_rodata(char *str) { return false; } 1384 #endif 1385 1386 static int __init set_debug_rodata(char *str) 1387 { 1388 if (arch_parse_debug_rodata(str)) 1389 return 0; 1390 1391 if (str && !strcmp(str, "on")) 1392 rodata_enabled = true; 1393 else if (str && !strcmp(str, "off")) 1394 rodata_enabled = false; 1395 else 1396 pr_warn("Invalid option string for rodata: '%s'\n", str); 1397 return 0; 1398 } 1399 early_param("rodata", set_debug_rodata); 1400 #endif 1401 1402 #ifdef CONFIG_STRICT_KERNEL_RWX 1403 static void mark_readonly(void) 1404 { 1405 if (rodata_enabled) { 1406 /* 1407 * load_module() results in W+X mappings, which are cleaned 1408 * up with init_free_wq. Let's make sure that queued work is 1409 * flushed so that we don't hit false positives looking for 1410 * insecure pages which are W+X. 1411 */ 1412 flush_module_init_free_work(); 1413 mark_rodata_ro(); 1414 rodata_test(); 1415 } else 1416 pr_info("Kernel memory protection disabled.\n"); 1417 } 1418 #elif defined(CONFIG_ARCH_HAS_STRICT_KERNEL_RWX) 1419 static inline void mark_readonly(void) 1420 { 1421 pr_warn("Kernel memory protection not selected by kernel config.\n"); 1422 } 1423 #else 1424 static inline void mark_readonly(void) 1425 { 1426 pr_warn("This architecture does not have kernel memory protection.\n"); 1427 } 1428 #endif 1429 1430 void __weak free_initmem(void) 1431 { 1432 free_initmem_default(POISON_FREE_INITMEM); 1433 } 1434 1435 static int __ref kernel_init(void *unused) 1436 { 1437 int ret; 1438 1439 /* 1440 * Wait until kthreadd is all set-up. 1441 */ 1442 wait_for_completion(&kthreadd_done); 1443 1444 kernel_init_freeable(); 1445 /* need to finish all async __init code before freeing the memory */ 1446 async_synchronize_full(); 1447 1448 system_state = SYSTEM_FREEING_INITMEM; 1449 kprobe_free_init_mem(); 1450 ftrace_free_init_mem(); 1451 kgdb_free_init_mem(); 1452 exit_boot_config(); 1453 free_initmem(); 1454 mark_readonly(); 1455 1456 /* 1457 * Kernel mappings are now finalized - update the userspace page-table 1458 * to finalize PTI. 1459 */ 1460 pti_finalize(); 1461 1462 system_state = SYSTEM_RUNNING; 1463 numa_default_policy(); 1464 1465 rcu_end_inkernel_boot(); 1466 1467 do_sysctl_args(); 1468 1469 if (ramdisk_execute_command) { 1470 ret = run_init_process(ramdisk_execute_command); 1471 if (!ret) 1472 return 0; 1473 pr_err("Failed to execute %s (error %d)\n", 1474 ramdisk_execute_command, ret); 1475 } 1476 1477 /* 1478 * We try each of these until one succeeds. 1479 * 1480 * The Bourne shell can be used instead of init if we are 1481 * trying to recover a really broken machine. 1482 */ 1483 if (execute_command) { 1484 ret = run_init_process(execute_command); 1485 if (!ret) 1486 return 0; 1487 panic("Requested init %s failed (error %d).", 1488 execute_command, ret); 1489 } 1490 1491 if (CONFIG_DEFAULT_INIT[0] != '\0') { 1492 ret = run_init_process(CONFIG_DEFAULT_INIT); 1493 if (ret) 1494 pr_err("Default init %s failed (error %d)\n", 1495 CONFIG_DEFAULT_INIT, ret); 1496 else 1497 return 0; 1498 } 1499 1500 if (!try_to_run_init_process("/sbin/init") || 1501 !try_to_run_init_process("/etc/init") || 1502 !try_to_run_init_process("/bin/init") || 1503 !try_to_run_init_process("/bin/sh")) 1504 return 0; 1505 1506 panic("No working init found. Try passing init= option to kernel. " 1507 "See Linux Documentation/admin-guide/init.rst for guidance."); 1508 } 1509 1510 /* Open /dev/console, for stdin/stdout/stderr, this should never fail */ 1511 void __init console_on_rootfs(void) 1512 { 1513 struct file *file = filp_open("/dev/console", O_RDWR, 0); 1514 1515 if (IS_ERR(file)) { 1516 pr_err("Warning: unable to open an initial console.\n"); 1517 return; 1518 } 1519 init_dup(file); 1520 init_dup(file); 1521 init_dup(file); 1522 fput(file); 1523 } 1524 1525 static noinline void __init kernel_init_freeable(void) 1526 { 1527 /* Now the scheduler is fully set up and can do blocking allocations */ 1528 gfp_allowed_mask = __GFP_BITS_MASK; 1529 1530 /* 1531 * init can allocate pages on any node 1532 */ 1533 set_mems_allowed(node_states[N_MEMORY]); 1534 1535 cad_pid = get_pid(task_pid(current)); 1536 1537 smp_prepare_cpus(setup_max_cpus); 1538 1539 workqueue_init(); 1540 1541 init_mm_internals(); 1542 1543 rcu_init_tasks_generic(); 1544 do_pre_smp_initcalls(); 1545 lockup_detector_init(); 1546 1547 smp_init(); 1548 sched_init_smp(); 1549 1550 workqueue_init_topology(); 1551 padata_init(); 1552 page_alloc_init_late(); 1553 1554 do_basic_setup(); 1555 1556 kunit_run_all_tests(); 1557 1558 wait_for_initramfs(); 1559 console_on_rootfs(); 1560 1561 /* 1562 * check if there is an early userspace init. If yes, let it do all 1563 * the work 1564 */ 1565 if (init_eaccess(ramdisk_execute_command) != 0) { 1566 ramdisk_execute_command = NULL; 1567 prepare_namespace(); 1568 } 1569 1570 /* 1571 * Ok, we have completed the initial bootup, and 1572 * we're essentially up and running. Get rid of the 1573 * initmem segments and start the user-mode stuff.. 1574 * 1575 * rootfs is available now, try loading the public keys 1576 * and default modules 1577 */ 1578 1579 integrity_load_keys(); 1580 } 1581