1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef STICORE_H 3 #define STICORE_H 4 5 struct fb_info; 6 7 /* generic STI structures & functions */ 8 9 #define MAX_STI_ROMS 4 /* max no. of ROMs which this driver handles */ 10 11 #define STI_REGION_MAX 8 /* hardcoded STI constants */ 12 #define STI_DEV_NAME_LENGTH 32 13 #define STI_MONITOR_MAX 256 14 15 #define STI_FONT_HPROMAN8 1 16 #define STI_FONT_KANA8 2 17 18 #define ALT_CODE_TYPE_UNKNOWN 0x00 /* alt code type values */ 19 #define ALT_CODE_TYPE_PA_RISC_64 0x01 20 21 /* The latency of the STI functions cannot really be reduced by setting 22 * this to 0; STI doesn't seem to be designed to allow calling a different 23 * function (or the same function with different arguments) after a 24 * function exited with 1 as return value. 25 * 26 * As all of the functions below could be called from interrupt context, 27 * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1) 28 * block. Really bad latency there. 29 * 30 * Probably the best solution to all this is have the generic code manage 31 * the screen buffer and a kernel thread to call STI occasionally. 32 * 33 * Luckily, the frame buffer guys have the same problem so we can just wait 34 * for them to fix it and steal their solution. prumpf 35 */ 36 37 #include <asm/io.h> 38 39 #define STI_WAIT 1 40 41 #define STI_PTR(p) ( virt_to_phys(p) ) 42 #define PTR_STI(p) ( phys_to_virt((unsigned long)p) ) 43 44 #define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x) 45 #define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y) 46 47 /* sti_font_xy() use the native font ROM ! */ 48 #define sti_font_x(sti) (PTR_STI(sti->font)->width) 49 #define sti_font_y(sti) (PTR_STI(sti->font)->height) 50 51 #ifdef CONFIG_64BIT 52 #define STI_LOWMEM (GFP_KERNEL | GFP_DMA) 53 #else 54 #define STI_LOWMEM (GFP_KERNEL) 55 #endif 56 57 58 /* STI function configuration structs */ 59 60 typedef union region { 61 struct { 62 u32 offset : 14; /* offset in 4kbyte page */ 63 u32 sys_only : 1; /* don't map to user space */ 64 u32 cache : 1; /* map to data cache */ 65 u32 btlb : 1; /* map to block tlb */ 66 u32 last : 1; /* last region in list */ 67 u32 length : 14; /* length in 4kbyte page */ 68 } region_desc; 69 70 u32 region; /* complete region value */ 71 } region_t; 72 73 #define REGION_OFFSET_TO_PHYS( rt, hpa ) \ 74 (((rt).region_desc.offset << 12) + (hpa)) 75 76 struct sti_glob_cfg_ext { 77 u8 curr_mon; /* current monitor configured */ 78 u8 friendly_boot; /* in friendly boot mode */ 79 s16 power; /* power calculation (in Watts) */ 80 s32 freq_ref; /* frequency reference */ 81 u32 sti_mem_addr; /* pointer to global sti memory (size=sti_mem_request) */ 82 u32 future_ptr; /* pointer to future data */ 83 }; 84 85 struct sti_glob_cfg { 86 s32 text_planes; /* number of planes used for text */ 87 s16 onscreen_x; /* screen width in pixels */ 88 s16 onscreen_y; /* screen height in pixels */ 89 s16 offscreen_x; /* offset width in pixels */ 90 s16 offscreen_y; /* offset height in pixels */ 91 s16 total_x; /* frame buffer width in pixels */ 92 s16 total_y; /* frame buffer height in pixels */ 93 u32 region_ptrs[STI_REGION_MAX]; /* region pointers */ 94 s32 reent_lvl; /* storage for reentry level value */ 95 u32 save_addr; /* where to save or restore reentrant state */ 96 u32 ext_ptr; /* pointer to extended glob_cfg data structure */ 97 }; 98 99 100 /* STI init function structs */ 101 102 struct sti_init_flags { 103 u32 wait : 1; /* should routine idle wait or not */ 104 u32 reset : 1; /* hard reset the device? */ 105 u32 text : 1; /* turn on text display planes? */ 106 u32 nontext : 1; /* turn on non-text display planes? */ 107 u32 clear : 1; /* clear text display planes? */ 108 u32 cmap_blk : 1; /* non-text planes cmap black? */ 109 u32 enable_be_timer : 1; /* enable bus error timer */ 110 u32 enable_be_int : 1; /* enable bus error timer interrupt */ 111 u32 no_chg_tx : 1; /* don't change text settings */ 112 u32 no_chg_ntx : 1; /* don't change non-text settings */ 113 u32 no_chg_bet : 1; /* don't change berr timer settings */ 114 u32 no_chg_bei : 1; /* don't change berr int settings */ 115 u32 init_cmap_tx : 1; /* initialize cmap for text planes */ 116 u32 cmt_chg : 1; /* change current monitor type */ 117 u32 retain_ie : 1; /* don't allow reset to clear int enables */ 118 u32 caller_bootrom : 1; /* set only by bootrom for each call */ 119 u32 caller_kernel : 1; /* set only by kernel for each call */ 120 u32 caller_other : 1; /* set only by non-[BR/K] caller */ 121 u32 pad : 14; /* pad to word boundary */ 122 u32 future_ptr; /* pointer to future data */ 123 }; 124 125 struct sti_init_inptr_ext { 126 u8 config_mon_type; /* configure to monitor type */ 127 u8 pad[1]; /* pad to word boundary */ 128 u16 inflight_data; /* inflight data possible on PCI */ 129 u32 future_ptr; /* pointer to future data */ 130 }; 131 132 struct sti_init_inptr { 133 s32 text_planes; /* number of planes to use for text */ 134 u32 ext_ptr; /* pointer to extended init_graph inptr data structure*/ 135 }; 136 137 138 struct sti_init_outptr { 139 s32 errno; /* error number on failure */ 140 s32 text_planes; /* number of planes used for text */ 141 u32 future_ptr; /* pointer to future data */ 142 }; 143 144 145 146 /* STI configuration function structs */ 147 148 struct sti_conf_flags { 149 u32 wait : 1; /* should routine idle wait or not */ 150 u32 pad : 31; /* pad to word boundary */ 151 u32 future_ptr; /* pointer to future data */ 152 }; 153 154 struct sti_conf_inptr { 155 u32 future_ptr; /* pointer to future data */ 156 }; 157 158 struct sti_conf_outptr_ext { 159 u32 crt_config[3]; /* hardware specific X11/OGL information */ 160 u32 crt_hdw[3]; 161 u32 future_ptr; 162 }; 163 164 struct sti_conf_outptr { 165 s32 errno; /* error number on failure */ 166 s16 onscreen_x; /* screen width in pixels */ 167 s16 onscreen_y; /* screen height in pixels */ 168 s16 offscreen_x; /* offscreen width in pixels */ 169 s16 offscreen_y; /* offscreen height in pixels */ 170 s16 total_x; /* frame buffer width in pixels */ 171 s16 total_y; /* frame buffer height in pixels */ 172 s32 bits_per_pixel; /* bits/pixel device has configured */ 173 s32 bits_used; /* bits which can be accessed */ 174 s32 planes; /* number of fb planes in system */ 175 u8 dev_name[STI_DEV_NAME_LENGTH]; /* null terminated product name */ 176 u32 attributes; /* flags denoting attributes */ 177 u32 ext_ptr; /* pointer to future data */ 178 }; 179 180 struct sti_rom { 181 u8 type[4]; 182 u8 res004; 183 u8 num_mons; 184 u8 revno[2]; 185 u32 graphics_id[2]; 186 187 u32 font_start; 188 u32 statesize; 189 u32 last_addr; 190 u32 region_list; 191 192 u16 reentsize; 193 u16 maxtime; 194 u32 mon_tbl_addr; 195 u32 user_data_addr; 196 u32 sti_mem_req; 197 198 u32 user_data_size; 199 u16 power; 200 u8 bus_support; 201 u8 ext_bus_support; 202 u8 alt_code_type; 203 u8 ext_dd_struct[3]; 204 u32 cfb_addr; 205 206 u32 init_graph; 207 u32 state_mgmt; 208 u32 font_unpmv; 209 u32 block_move; 210 u32 self_test; 211 u32 excep_hdlr; 212 u32 inq_conf; 213 u32 set_cm_entry; 214 u32 dma_ctrl; 215 u8 res040[7 * 4]; 216 217 u32 init_graph_addr; 218 u32 state_mgmt_addr; 219 u32 font_unp_addr; 220 u32 block_move_addr; 221 u32 self_test_addr; 222 u32 excep_hdlr_addr; 223 u32 inq_conf_addr; 224 u32 set_cm_entry_addr; 225 u32 image_unpack_addr; 226 u32 pa_risx_addrs[7]; 227 }; 228 229 struct sti_rom_font { 230 u16 first_char; 231 u16 last_char; 232 u8 width; 233 u8 height; 234 u8 font_type; /* language type */ 235 u8 bytes_per_char; 236 u32 next_font; 237 u8 underline_height; 238 u8 underline_pos; 239 u8 res008[2]; 240 }; 241 242 /* sticore internal font handling */ 243 244 struct sti_cooked_font { 245 struct sti_rom_font *raw; /* native ptr for STI functions */ 246 void *raw_ptr; /* kmalloc'ed font data */ 247 struct sti_cooked_font *next_font; 248 int height, width; 249 int refcount; 250 u32 crc; 251 }; 252 253 struct sti_cooked_rom { 254 struct sti_rom *raw; 255 struct sti_cooked_font *font_start; 256 }; 257 258 /* STI font printing function structs */ 259 260 struct sti_font_inptr { 261 u32 font_start_addr; /* address of font start */ 262 s16 index; /* index into font table of character */ 263 u8 fg_color; /* foreground color of character */ 264 u8 bg_color; /* background color of character */ 265 s16 dest_x; /* X location of character upper left */ 266 s16 dest_y; /* Y location of character upper left */ 267 u32 future_ptr; /* pointer to future data */ 268 }; 269 270 struct sti_font_flags { 271 u32 wait : 1; /* should routine idle wait or not */ 272 u32 non_text : 1; /* font unpack/move in non_text planes =1, text =0 */ 273 u32 pad : 30; /* pad to word boundary */ 274 u32 future_ptr; /* pointer to future data */ 275 }; 276 277 struct sti_font_outptr { 278 s32 errno; /* error number on failure */ 279 u32 future_ptr; /* pointer to future data */ 280 }; 281 282 /* STI blockmove structs */ 283 284 struct sti_blkmv_flags { 285 u32 wait : 1; /* should routine idle wait or not */ 286 u32 color : 1; /* change color during move? */ 287 u32 clear : 1; /* clear during move? */ 288 u32 non_text : 1; /* block move in non_text planes =1, text =0 */ 289 u32 pad : 28; /* pad to word boundary */ 290 u32 future_ptr; /* pointer to future data */ 291 }; 292 293 struct sti_blkmv_inptr { 294 u8 fg_color; /* foreground color after move */ 295 u8 bg_color; /* background color after move */ 296 s16 src_x; /* source upper left pixel x location */ 297 s16 src_y; /* source upper left pixel y location */ 298 s16 dest_x; /* dest upper left pixel x location */ 299 s16 dest_y; /* dest upper left pixel y location */ 300 s16 width; /* block width in pixels */ 301 s16 height; /* block height in pixels */ 302 u32 future_ptr; /* pointer to future data */ 303 }; 304 305 struct sti_blkmv_outptr { 306 s32 errno; /* error number on failure */ 307 u32 future_ptr; /* pointer to future data */ 308 }; 309 310 311 /* sti_all_data is an internal struct which needs to be allocated in 312 * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */ 313 314 struct sti_all_data { 315 struct sti_glob_cfg glob_cfg; 316 struct sti_glob_cfg_ext glob_cfg_ext; 317 318 struct sti_conf_inptr inq_inptr; 319 struct sti_conf_outptr inq_outptr; /* configuration */ 320 struct sti_conf_outptr_ext inq_outptr_ext; 321 322 struct sti_init_inptr_ext init_inptr_ext; 323 struct sti_init_inptr init_inptr; 324 struct sti_init_outptr init_outptr; 325 326 struct sti_blkmv_inptr blkmv_inptr; 327 struct sti_blkmv_outptr blkmv_outptr; 328 329 struct sti_font_inptr font_inptr; 330 struct sti_font_outptr font_outptr; 331 332 /* leave as last entries */ 333 unsigned long save_addr[1024 / sizeof(unsigned long)]; 334 /* min 256 bytes which is STI default, max sti->sti_mem_request */ 335 unsigned long sti_mem_addr[256 / sizeof(unsigned long)]; 336 /* do not add something below here ! */ 337 }; 338 339 /* internal generic STI struct */ 340 341 struct sti_struct { 342 spinlock_t lock; 343 344 /* char **mon_strings; */ 345 int sti_mem_request; 346 u32 graphics_id[2]; 347 348 struct sti_cooked_rom *rom; 349 350 unsigned long font_unpmv; 351 unsigned long block_move; 352 unsigned long init_graph; 353 unsigned long inq_conf; 354 355 /* all following fields are initialized by the generic routines */ 356 int text_planes; 357 region_t regions[STI_REGION_MAX]; 358 unsigned long regions_phys[STI_REGION_MAX]; 359 360 struct sti_glob_cfg *glob_cfg; /* points into sti_all_data */ 361 362 int wordmode; 363 struct sti_cooked_font *font; /* ptr to selected font (cooked) */ 364 365 struct pci_dev *pd; 366 367 /* PCI data structures (pg. 17ff from sti.pdf) */ 368 u8 rm_entry[16]; /* pci region mapper array == pci config space offset */ 369 370 /* pointer to the fb_info where this STI device is used */ 371 struct fb_info *info; 372 373 /* pointer to all internal data */ 374 struct sti_all_data *sti_data; 375 376 /* pa_path of this device */ 377 char pa_path[24]; 378 }; 379 380 381 /* sticore interface functions */ 382 383 struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */ 384 void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f); 385 386 387 /* sticore main function to call STI firmware */ 388 389 int sti_call(const struct sti_struct *sti, unsigned long func, 390 const void *flags, void *inptr, void *outptr, 391 struct sti_glob_cfg *glob_cfg); 392 393 394 /* functions to call the STI ROM directly */ 395 396 void sti_putc(struct sti_struct *sti, int c, int y, int x, 397 struct sti_cooked_font *font); 398 void sti_set(struct sti_struct *sti, int src_y, int src_x, 399 int height, int width, u8 color); 400 void sti_clear(struct sti_struct *sti, int src_y, int src_x, 401 int height, int width, int c, struct sti_cooked_font *font); 402 void sti_bmove(struct sti_struct *sti, int src_y, int src_x, 403 int dst_y, int dst_x, int height, int width, 404 struct sti_cooked_font *font); 405 406 #endif /* STICORE_H */ 407