1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef STICORE_H 3 #define STICORE_H 4 5 struct fb_info; 6 7 /* generic STI structures & functions */ 8 9 #define MAX_STI_ROMS 4 /* max no. of ROMs which this driver handles */ 10 11 #define STI_REGION_MAX 8 /* hardcoded STI constants */ 12 #define STI_DEV_NAME_LENGTH 32 13 #define STI_MONITOR_MAX 256 14 15 #define STI_FONT_HPROMAN8 1 16 #define STI_FONT_KANA8 2 17 18 #define ALT_CODE_TYPE_UNKNOWN 0x00 /* alt code type values */ 19 #define ALT_CODE_TYPE_PA_RISC_64 0x01 20 21 /* The latency of the STI functions cannot really be reduced by setting 22 * this to 0; STI doesn't seem to be designed to allow calling a different 23 * function (or the same function with different arguments) after a 24 * function exited with 1 as return value. 25 * 26 * As all of the functions below could be called from interrupt context, 27 * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1) 28 * block. Really bad latency there. 29 * 30 * Probably the best solution to all this is have the generic code manage 31 * the screen buffer and a kernel thread to call STI occasionally. 32 * 33 * Luckily, the frame buffer guys have the same problem so we can just wait 34 * for them to fix it and steal their solution. prumpf 35 */ 36 37 #include <asm/io.h> 38 39 #define STI_WAIT 1 40 41 #define STI_PTR(p) ( virt_to_phys(p) ) 42 43 #define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x) 44 #define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y) 45 46 /* sti_font_xy() use the native font ROM ! */ 47 #define sti_font_x(sti) (PTR_STI(sti->font)->width) 48 #define sti_font_y(sti) (PTR_STI(sti->font)->height) 49 50 #ifdef CONFIG_64BIT 51 #define STI_LOWMEM (GFP_KERNEL | GFP_DMA) 52 #else 53 #define STI_LOWMEM (GFP_KERNEL) 54 #endif 55 56 57 /* STI function configuration structs */ 58 59 typedef union region { 60 struct { 61 u32 offset : 14; /* offset in 4kbyte page */ 62 u32 sys_only : 1; /* don't map to user space */ 63 u32 cache : 1; /* map to data cache */ 64 u32 btlb : 1; /* map to block tlb */ 65 u32 last : 1; /* last region in list */ 66 u32 length : 14; /* length in 4kbyte page */ 67 } region_desc; 68 69 u32 region; /* complete region value */ 70 } region_t; 71 72 #define REGION_OFFSET_TO_PHYS( rt, hpa ) \ 73 (((rt).region_desc.offset << 12) + (hpa)) 74 75 struct sti_glob_cfg_ext { 76 u8 curr_mon; /* current monitor configured */ 77 u8 friendly_boot; /* in friendly boot mode */ 78 s16 power; /* power calculation (in Watts) */ 79 s32 freq_ref; /* frequency reference */ 80 u32 *sti_mem_addr; /* pointer to global sti memory (size=sti_mem_request) */ 81 u32 *future_ptr; /* pointer to future data */ 82 }; 83 84 struct sti_glob_cfg { 85 s32 text_planes; /* number of planes used for text */ 86 s16 onscreen_x; /* screen width in pixels */ 87 s16 onscreen_y; /* screen height in pixels */ 88 s16 offscreen_x; /* offset width in pixels */ 89 s16 offscreen_y; /* offset height in pixels */ 90 s16 total_x; /* frame buffer width in pixels */ 91 s16 total_y; /* frame buffer height in pixels */ 92 u32 *region_ptrs[STI_REGION_MAX]; /* region pointers */ 93 s32 reent_lvl; /* storage for reentry level value */ 94 u32 *save_addr; /* where to save or restore reentrant state */ 95 u32 *ext_ptr; /* pointer to extended glob_cfg data structure */ 96 }; 97 98 99 /* STI init function structs */ 100 101 struct sti_init_flags { 102 u32 wait : 1; /* should routine idle wait or not */ 103 u32 reset : 1; /* hard reset the device? */ 104 u32 text : 1; /* turn on text display planes? */ 105 u32 nontext : 1; /* turn on non-text display planes? */ 106 u32 clear : 1; /* clear text display planes? */ 107 u32 cmap_blk : 1; /* non-text planes cmap black? */ 108 u32 enable_be_timer : 1; /* enable bus error timer */ 109 u32 enable_be_int : 1; /* enable bus error timer interrupt */ 110 u32 no_chg_tx : 1; /* don't change text settings */ 111 u32 no_chg_ntx : 1; /* don't change non-text settings */ 112 u32 no_chg_bet : 1; /* don't change berr timer settings */ 113 u32 no_chg_bei : 1; /* don't change berr int settings */ 114 u32 init_cmap_tx : 1; /* initialize cmap for text planes */ 115 u32 cmt_chg : 1; /* change current monitor type */ 116 u32 retain_ie : 1; /* don't allow reset to clear int enables */ 117 u32 caller_bootrom : 1; /* set only by bootrom for each call */ 118 u32 caller_kernel : 1; /* set only by kernel for each call */ 119 u32 caller_other : 1; /* set only by non-[BR/K] caller */ 120 u32 pad : 14; /* pad to word boundary */ 121 u32 *future_ptr; /* pointer to future data */ 122 }; 123 124 struct sti_init_inptr_ext { 125 u8 config_mon_type; /* configure to monitor type */ 126 u8 pad[1]; /* pad to word boundary */ 127 u16 inflight_data; /* inflight data possible on PCI */ 128 u32 *future_ptr; /* pointer to future data */ 129 }; 130 131 struct sti_init_inptr { 132 s32 text_planes; /* number of planes to use for text */ 133 u32 *ext_ptr; /* pointer to extended init_graph inptr data structure*/ 134 }; 135 136 137 struct sti_init_outptr { 138 s32 errno; /* error number on failure */ 139 s32 text_planes; /* number of planes used for text */ 140 u32 *future_ptr; /* pointer to future data */ 141 }; 142 143 144 145 /* STI configuration function structs */ 146 147 struct sti_conf_flags { 148 u32 wait : 1; /* should routine idle wait or not */ 149 u32 pad : 31; /* pad to word boundary */ 150 u32 *future_ptr; /* pointer to future data */ 151 }; 152 153 struct sti_conf_inptr { 154 u32 *future_ptr; /* pointer to future data */ 155 }; 156 157 struct sti_conf_outptr_ext { 158 u32 crt_config[3]; /* hardware specific X11/OGL information */ 159 u32 crt_hdw[3]; 160 u32 *future_ptr; 161 }; 162 163 struct sti_conf_outptr { 164 s32 errno; /* error number on failure */ 165 s16 onscreen_x; /* screen width in pixels */ 166 s16 onscreen_y; /* screen height in pixels */ 167 s16 offscreen_x; /* offscreen width in pixels */ 168 s16 offscreen_y; /* offscreen height in pixels */ 169 s16 total_x; /* frame buffer width in pixels */ 170 s16 total_y; /* frame buffer height in pixels */ 171 s32 bits_per_pixel; /* bits/pixel device has configured */ 172 s32 bits_used; /* bits which can be accessed */ 173 s32 planes; /* number of fb planes in system */ 174 u8 dev_name[STI_DEV_NAME_LENGTH]; /* null terminated product name */ 175 u32 attributes; /* flags denoting attributes */ 176 u32 *ext_ptr; /* pointer to future data */ 177 }; 178 179 struct sti_rom { 180 u8 type[4]; 181 u8 res004; 182 u8 num_mons; 183 u8 revno[2]; 184 u32 graphics_id[2]; 185 186 u32 font_start; 187 u32 statesize; 188 u32 last_addr; 189 u32 region_list; 190 191 u16 reentsize; 192 u16 maxtime; 193 u32 mon_tbl_addr; 194 u32 user_data_addr; 195 u32 sti_mem_req; 196 197 u32 user_data_size; 198 u16 power; 199 u8 bus_support; 200 u8 ext_bus_support; 201 u8 alt_code_type; 202 u8 ext_dd_struct[3]; 203 u32 cfb_addr; 204 205 u32 init_graph; 206 u32 state_mgmt; 207 u32 font_unpmv; 208 u32 block_move; 209 u32 self_test; 210 u32 excep_hdlr; 211 u32 inq_conf; 212 u32 set_cm_entry; 213 u32 dma_ctrl; 214 u8 res040[7 * 4]; 215 216 u32 init_graph_addr; 217 u32 state_mgmt_addr; 218 u32 font_unp_addr; 219 u32 block_move_addr; 220 u32 self_test_addr; 221 u32 excep_hdlr_addr; 222 u32 inq_conf_addr; 223 u32 set_cm_entry_addr; 224 u32 image_unpack_addr; 225 u32 pa_risx_addrs[7]; 226 }; 227 228 struct sti_rom_font { 229 u16 first_char; 230 u16 last_char; 231 u8 width; 232 u8 height; 233 u8 font_type; /* language type */ 234 u8 bytes_per_char; 235 u32 next_font; 236 u8 underline_height; 237 u8 underline_pos; 238 u8 res008[2]; 239 }; 240 241 /* sticore internal font handling */ 242 243 struct sti_cooked_font { 244 struct sti_rom_font *raw; /* native ptr for STI functions */ 245 void *raw_ptr; /* kmalloc'ed font data */ 246 struct sti_cooked_font *next_font; 247 int height, width; 248 int refcount; 249 u32 crc; 250 }; 251 252 struct sti_cooked_rom { 253 struct sti_rom *raw; 254 struct sti_cooked_font *font_start; 255 }; 256 257 /* STI font printing function structs */ 258 259 struct sti_font_inptr { 260 u32 *font_start_addr; /* address of font start */ 261 s16 index; /* index into font table of character */ 262 u8 fg_color; /* foreground color of character */ 263 u8 bg_color; /* background color of character */ 264 s16 dest_x; /* X location of character upper left */ 265 s16 dest_y; /* Y location of character upper left */ 266 u32 *future_ptr; /* pointer to future data */ 267 }; 268 269 struct sti_font_flags { 270 u32 wait : 1; /* should routine idle wait or not */ 271 u32 non_text : 1; /* font unpack/move in non_text planes =1, text =0 */ 272 u32 pad : 30; /* pad to word boundary */ 273 u32 *future_ptr; /* pointer to future data */ 274 }; 275 276 struct sti_font_outptr { 277 s32 errno; /* error number on failure */ 278 u32 *future_ptr; /* pointer to future data */ 279 }; 280 281 /* STI blockmove structs */ 282 283 struct sti_blkmv_flags { 284 u32 wait : 1; /* should routine idle wait or not */ 285 u32 color : 1; /* change color during move? */ 286 u32 clear : 1; /* clear during move? */ 287 u32 non_text : 1; /* block move in non_text planes =1, text =0 */ 288 u32 pad : 28; /* pad to word boundary */ 289 u32 *future_ptr; /* pointer to future data */ 290 }; 291 292 struct sti_blkmv_inptr { 293 u8 fg_color; /* foreground color after move */ 294 u8 bg_color; /* background color after move */ 295 s16 src_x; /* source upper left pixel x location */ 296 s16 src_y; /* source upper left pixel y location */ 297 s16 dest_x; /* dest upper left pixel x location */ 298 s16 dest_y; /* dest upper left pixel y location */ 299 s16 width; /* block width in pixels */ 300 s16 height; /* block height in pixels */ 301 u32 *future_ptr; /* pointer to future data */ 302 }; 303 304 struct sti_blkmv_outptr { 305 s32 errno; /* error number on failure */ 306 u32 *future_ptr; /* pointer to future data */ 307 }; 308 309 310 /* sti_all_data is an internal struct which needs to be allocated in 311 * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */ 312 313 struct sti_all_data { 314 struct sti_glob_cfg glob_cfg; 315 struct sti_glob_cfg_ext glob_cfg_ext; 316 317 struct sti_conf_inptr inq_inptr; 318 struct sti_conf_outptr inq_outptr; /* configuration */ 319 struct sti_conf_outptr_ext inq_outptr_ext; 320 321 struct sti_init_inptr_ext init_inptr_ext; 322 struct sti_init_inptr init_inptr; 323 struct sti_init_outptr init_outptr; 324 325 struct sti_blkmv_inptr blkmv_inptr; 326 struct sti_blkmv_outptr blkmv_outptr; 327 328 struct sti_font_inptr font_inptr; 329 struct sti_font_outptr font_outptr; 330 331 /* leave as last entries */ 332 unsigned long save_addr[1024 / sizeof(unsigned long)]; 333 /* min 256 bytes which is STI default, max sti->sti_mem_request */ 334 unsigned long sti_mem_addr[256 / sizeof(unsigned long)]; 335 /* do not add something below here ! */ 336 }; 337 338 /* internal generic STI struct */ 339 340 struct sti_struct { 341 spinlock_t lock; 342 343 /* char **mon_strings; */ 344 int sti_mem_request; 345 u32 graphics_id[2]; 346 347 struct sti_cooked_rom *rom; 348 349 unsigned long font_unpmv; 350 unsigned long block_move; 351 unsigned long init_graph; 352 unsigned long inq_conf; 353 int do_call64; /* call 64-bit code */ 354 355 /* all following fields are initialized by the generic routines */ 356 int text_planes; 357 region_t regions[STI_REGION_MAX]; 358 unsigned long regions_phys[STI_REGION_MAX]; 359 360 struct sti_glob_cfg *glob_cfg; /* points into sti_all_data */ 361 362 int wordmode; 363 struct sti_cooked_font *font; /* ptr to selected font (cooked) */ 364 365 struct pci_dev *pd; 366 367 /* PCI data structures (pg. 17ff from sti.pdf) */ 368 u8 rm_entry[16]; /* pci region mapper array == pci config space offset */ 369 370 /* pointer to the fb_info where this STI device is used */ 371 struct fb_info *info; 372 373 /* pointer to all internal data */ 374 struct sti_all_data *sti_data; 375 376 /* pa_path of this device */ 377 char pa_path[24]; 378 }; 379 380 381 /* sticore interface functions */ 382 383 struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */ 384 void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f); 385 386 387 /* sticore main function to call STI firmware */ 388 389 int sti_call(const struct sti_struct *sti, unsigned long func, 390 const void *flags, void *inptr, void *outptr, 391 struct sti_glob_cfg *glob_cfg); 392 393 394 /* functions to call the STI ROM directly */ 395 396 void sti_putc(struct sti_struct *sti, int c, int y, int x, 397 struct sti_cooked_font *font); 398 void sti_set(struct sti_struct *sti, int src_y, int src_x, 399 int height, int width, u8 color); 400 void sti_clear(struct sti_struct *sti, int src_y, int src_x, 401 int height, int width, int c, struct sti_cooked_font *font); 402 void sti_bmove(struct sti_struct *sti, int src_y, int src_x, 403 int dst_y, int dst_x, int height, int width, 404 struct sti_cooked_font *font); 405 406 #endif /* STICORE_H */ 407