xref: /openbmc/linux/include/ufs/ufshcd.h (revision ef4290e6)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Universal Flash Storage Host controller driver
4  * Copyright (C) 2011-2013 Samsung India Software Operations
5  * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
6  *
7  * Authors:
8  *	Santosh Yaraganavi <santosh.sy@samsung.com>
9  *	Vinayak Holikatti <h.vinayak@samsung.com>
10  */
11 
12 #ifndef _UFSHCD_H
13 #define _UFSHCD_H
14 
15 #include <linux/bitfield.h>
16 #include <linux/blk-crypto-profile.h>
17 #include <linux/blk-mq.h>
18 #include <linux/devfreq.h>
19 #include <linux/pm_runtime.h>
20 #include <scsi/scsi_device.h>
21 #include <ufs/unipro.h>
22 #include <ufs/ufs.h>
23 #include <ufs/ufs_quirks.h>
24 #include <ufs/ufshci.h>
25 
26 #define UFSHCD "ufshcd"
27 
28 struct ufs_hba;
29 
30 enum dev_cmd_type {
31 	DEV_CMD_TYPE_NOP		= 0x0,
32 	DEV_CMD_TYPE_QUERY		= 0x1,
33 };
34 
35 enum ufs_event_type {
36 	/* uic specific errors */
37 	UFS_EVT_PA_ERR = 0,
38 	UFS_EVT_DL_ERR,
39 	UFS_EVT_NL_ERR,
40 	UFS_EVT_TL_ERR,
41 	UFS_EVT_DME_ERR,
42 
43 	/* fatal errors */
44 	UFS_EVT_AUTO_HIBERN8_ERR,
45 	UFS_EVT_FATAL_ERR,
46 	UFS_EVT_LINK_STARTUP_FAIL,
47 	UFS_EVT_RESUME_ERR,
48 	UFS_EVT_SUSPEND_ERR,
49 	UFS_EVT_WL_SUSP_ERR,
50 	UFS_EVT_WL_RES_ERR,
51 
52 	/* abnormal events */
53 	UFS_EVT_DEV_RESET,
54 	UFS_EVT_HOST_RESET,
55 	UFS_EVT_ABORT,
56 
57 	UFS_EVT_CNT,
58 };
59 
60 /**
61  * struct uic_command - UIC command structure
62  * @command: UIC command
63  * @argument1: UIC command argument 1
64  * @argument2: UIC command argument 2
65  * @argument3: UIC command argument 3
66  * @cmd_active: Indicate if UIC command is outstanding
67  * @done: UIC command completion
68  */
69 struct uic_command {
70 	u32 command;
71 	u32 argument1;
72 	u32 argument2;
73 	u32 argument3;
74 	int cmd_active;
75 	struct completion done;
76 };
77 
78 /* Used to differentiate the power management options */
79 enum ufs_pm_op {
80 	UFS_RUNTIME_PM,
81 	UFS_SYSTEM_PM,
82 	UFS_SHUTDOWN_PM,
83 };
84 
85 /* Host <-> Device UniPro Link state */
86 enum uic_link_state {
87 	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
88 	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
89 	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
90 	UIC_LINK_BROKEN_STATE	= 3, /* Link is in broken state */
91 };
92 
93 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
94 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
95 				    UIC_LINK_ACTIVE_STATE)
96 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
97 				    UIC_LINK_HIBERN8_STATE)
98 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
99 				   UIC_LINK_BROKEN_STATE)
100 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
101 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
102 				    UIC_LINK_ACTIVE_STATE)
103 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
104 				    UIC_LINK_HIBERN8_STATE)
105 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
106 				    UIC_LINK_BROKEN_STATE)
107 
108 #define ufshcd_set_ufs_dev_active(h) \
109 	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
110 #define ufshcd_set_ufs_dev_sleep(h) \
111 	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
112 #define ufshcd_set_ufs_dev_poweroff(h) \
113 	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
114 #define ufshcd_set_ufs_dev_deepsleep(h) \
115 	((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
116 #define ufshcd_is_ufs_dev_active(h) \
117 	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
118 #define ufshcd_is_ufs_dev_sleep(h) \
119 	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
120 #define ufshcd_is_ufs_dev_poweroff(h) \
121 	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
122 #define ufshcd_is_ufs_dev_deepsleep(h) \
123 	((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
124 
125 /*
126  * UFS Power management levels.
127  * Each level is in increasing order of power savings, except DeepSleep
128  * which is lower than PowerDown with power on but not PowerDown with
129  * power off.
130  */
131 enum ufs_pm_level {
132 	UFS_PM_LVL_0,
133 	UFS_PM_LVL_1,
134 	UFS_PM_LVL_2,
135 	UFS_PM_LVL_3,
136 	UFS_PM_LVL_4,
137 	UFS_PM_LVL_5,
138 	UFS_PM_LVL_6,
139 	UFS_PM_LVL_MAX
140 };
141 
142 struct ufs_pm_lvl_states {
143 	enum ufs_dev_pwr_mode dev_state;
144 	enum uic_link_state link_state;
145 };
146 
147 /**
148  * struct ufshcd_lrb - local reference block
149  * @utr_descriptor_ptr: UTRD address of the command
150  * @ucd_req_ptr: UCD address of the command
151  * @ucd_rsp_ptr: Response UPIU address for this command
152  * @ucd_prdt_ptr: PRDT address of the command
153  * @utrd_dma_addr: UTRD dma address for debug
154  * @ucd_prdt_dma_addr: PRDT dma address for debug
155  * @ucd_rsp_dma_addr: UPIU response dma address for debug
156  * @ucd_req_dma_addr: UPIU request dma address for debug
157  * @cmd: pointer to SCSI command
158  * @scsi_status: SCSI status of the command
159  * @command_type: SCSI, UFS, Query.
160  * @task_tag: Task tag of the command
161  * @lun: LUN of the command
162  * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
163  * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC)
164  * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock)
165  * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC)
166  * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock)
167  * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
168  * @data_unit_num: the data unit number for the first block for inline crypto
169  * @req_abort_skip: skip request abort task flag
170  */
171 struct ufshcd_lrb {
172 	struct utp_transfer_req_desc *utr_descriptor_ptr;
173 	struct utp_upiu_req *ucd_req_ptr;
174 	struct utp_upiu_rsp *ucd_rsp_ptr;
175 	struct ufshcd_sg_entry *ucd_prdt_ptr;
176 
177 	dma_addr_t utrd_dma_addr;
178 	dma_addr_t ucd_req_dma_addr;
179 	dma_addr_t ucd_rsp_dma_addr;
180 	dma_addr_t ucd_prdt_dma_addr;
181 
182 	struct scsi_cmnd *cmd;
183 	int scsi_status;
184 
185 	int command_type;
186 	int task_tag;
187 	u8 lun; /* UPIU LUN id field is only 8-bit wide */
188 	bool intr_cmd;
189 	ktime_t issue_time_stamp;
190 	u64 issue_time_stamp_local_clock;
191 	ktime_t compl_time_stamp;
192 	u64 compl_time_stamp_local_clock;
193 #ifdef CONFIG_SCSI_UFS_CRYPTO
194 	int crypto_key_slot;
195 	u64 data_unit_num;
196 #endif
197 
198 	bool req_abort_skip;
199 };
200 
201 /**
202  * struct ufs_query - holds relevant data structures for query request
203  * @request: request upiu and function
204  * @descriptor: buffer for sending/receiving descriptor
205  * @response: response upiu and response
206  */
207 struct ufs_query {
208 	struct ufs_query_req request;
209 	u8 *descriptor;
210 	struct ufs_query_res response;
211 };
212 
213 /**
214  * struct ufs_dev_cmd - all assosiated fields with device management commands
215  * @type: device management command type - Query, NOP OUT
216  * @lock: lock to allow one command at a time
217  * @complete: internal commands completion
218  * @query: Device management query information
219  */
220 struct ufs_dev_cmd {
221 	enum dev_cmd_type type;
222 	struct mutex lock;
223 	struct completion *complete;
224 	struct ufs_query query;
225 };
226 
227 /**
228  * struct ufs_clk_info - UFS clock related info
229  * @list: list headed by hba->clk_list_head
230  * @clk: clock node
231  * @name: clock name
232  * @max_freq: maximum frequency supported by the clock
233  * @min_freq: min frequency that can be used for clock scaling
234  * @curr_freq: indicates the current frequency that it is set to
235  * @keep_link_active: indicates that the clk should not be disabled if
236  *		      link is active
237  * @enabled: variable to check against multiple enable/disable
238  */
239 struct ufs_clk_info {
240 	struct list_head list;
241 	struct clk *clk;
242 	const char *name;
243 	u32 max_freq;
244 	u32 min_freq;
245 	u32 curr_freq;
246 	bool keep_link_active;
247 	bool enabled;
248 };
249 
250 enum ufs_notify_change_status {
251 	PRE_CHANGE,
252 	POST_CHANGE,
253 };
254 
255 struct ufs_pa_layer_attr {
256 	u32 gear_rx;
257 	u32 gear_tx;
258 	u32 lane_rx;
259 	u32 lane_tx;
260 	u32 pwr_rx;
261 	u32 pwr_tx;
262 	u32 hs_rate;
263 };
264 
265 struct ufs_pwr_mode_info {
266 	bool is_valid;
267 	struct ufs_pa_layer_attr info;
268 };
269 
270 /**
271  * struct ufs_hba_variant_ops - variant specific callbacks
272  * @name: variant name
273  * @init: called when the driver is initialized
274  * @exit: called to cleanup everything done in init
275  * @get_ufs_hci_version: called to get UFS HCI version
276  * @clk_scale_notify: notifies that clks are scaled up/down
277  * @setup_clocks: called before touching any of the controller registers
278  * @hce_enable_notify: called before and after HCE enable bit is set to allow
279  *                     variant specific Uni-Pro initialization.
280  * @link_startup_notify: called before and after Link startup is carried out
281  *                       to allow variant specific Uni-Pro initialization.
282  * @pwr_change_notify: called before and after a power mode change
283  *			is carried out to allow vendor spesific capabilities
284  *			to be set.
285  * @setup_xfer_req: called before any transfer request is issued
286  *                  to set some things
287  * @setup_task_mgmt: called before any task management request is issued
288  *                  to set some things
289  * @hibern8_notify: called around hibern8 enter/exit
290  * @apply_dev_quirks: called to apply device specific quirks
291  * @fixup_dev_quirks: called to modify device specific quirks
292  * @suspend: called during host controller PM callback
293  * @resume: called during host controller PM callback
294  * @dbg_register_dump: used to dump controller debug information
295  * @phy_initialization: used to initialize phys
296  * @device_reset: called to issue a reset pulse on the UFS device
297  * @config_scaling_param: called to configure clock scaling parameters
298  * @program_key: program or evict an inline encryption key
299  * @event_notify: called to notify important events
300  */
301 struct ufs_hba_variant_ops {
302 	const char *name;
303 	int	(*init)(struct ufs_hba *);
304 	void    (*exit)(struct ufs_hba *);
305 	u32	(*get_ufs_hci_version)(struct ufs_hba *);
306 	int	(*clk_scale_notify)(struct ufs_hba *, bool,
307 				    enum ufs_notify_change_status);
308 	int	(*setup_clocks)(struct ufs_hba *, bool,
309 				enum ufs_notify_change_status);
310 	int	(*hce_enable_notify)(struct ufs_hba *,
311 				     enum ufs_notify_change_status);
312 	int	(*link_startup_notify)(struct ufs_hba *,
313 				       enum ufs_notify_change_status);
314 	int	(*pwr_change_notify)(struct ufs_hba *,
315 					enum ufs_notify_change_status status,
316 					struct ufs_pa_layer_attr *,
317 					struct ufs_pa_layer_attr *);
318 	void	(*setup_xfer_req)(struct ufs_hba *hba, int tag,
319 				  bool is_scsi_cmd);
320 	void	(*setup_task_mgmt)(struct ufs_hba *, int, u8);
321 	void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
322 					enum ufs_notify_change_status);
323 	int	(*apply_dev_quirks)(struct ufs_hba *hba);
324 	void	(*fixup_dev_quirks)(struct ufs_hba *hba);
325 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op,
326 					enum ufs_notify_change_status);
327 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
328 	void	(*dbg_register_dump)(struct ufs_hba *hba);
329 	int	(*phy_initialization)(struct ufs_hba *);
330 	int	(*device_reset)(struct ufs_hba *hba);
331 	void	(*config_scaling_param)(struct ufs_hba *hba,
332 				struct devfreq_dev_profile *profile,
333 				struct devfreq_simple_ondemand_data *data);
334 	int	(*program_key)(struct ufs_hba *hba,
335 			       const union ufs_crypto_cfg_entry *cfg, int slot);
336 	void	(*event_notify)(struct ufs_hba *hba,
337 				enum ufs_event_type evt, void *data);
338 };
339 
340 /* clock gating state  */
341 enum clk_gating_state {
342 	CLKS_OFF,
343 	CLKS_ON,
344 	REQ_CLKS_OFF,
345 	REQ_CLKS_ON,
346 };
347 
348 /**
349  * struct ufs_clk_gating - UFS clock gating related info
350  * @gate_work: worker to turn off clocks after some delay as specified in
351  * delay_ms
352  * @ungate_work: worker to turn on clocks that will be used in case of
353  * interrupt context
354  * @state: the current clocks state
355  * @delay_ms: gating delay in ms
356  * @is_suspended: clk gating is suspended when set to 1 which can be used
357  * during suspend/resume
358  * @delay_attr: sysfs attribute to control delay_attr
359  * @enable_attr: sysfs attribute to enable/disable clock gating
360  * @is_enabled: Indicates the current status of clock gating
361  * @is_initialized: Indicates whether clock gating is initialized or not
362  * @active_reqs: number of requests that are pending and should be waited for
363  * completion before gating clocks.
364  * @clk_gating_workq: workqueue for clock gating work.
365  */
366 struct ufs_clk_gating {
367 	struct delayed_work gate_work;
368 	struct work_struct ungate_work;
369 	enum clk_gating_state state;
370 	unsigned long delay_ms;
371 	bool is_suspended;
372 	struct device_attribute delay_attr;
373 	struct device_attribute enable_attr;
374 	bool is_enabled;
375 	bool is_initialized;
376 	int active_reqs;
377 	struct workqueue_struct *clk_gating_workq;
378 };
379 
380 struct ufs_saved_pwr_info {
381 	struct ufs_pa_layer_attr info;
382 	bool is_valid;
383 };
384 
385 /**
386  * struct ufs_clk_scaling - UFS clock scaling related data
387  * @active_reqs: number of requests that are pending. If this is zero when
388  * devfreq ->target() function is called then schedule "suspend_work" to
389  * suspend devfreq.
390  * @tot_busy_t: Total busy time in current polling window
391  * @window_start_t: Start time (in jiffies) of the current polling window
392  * @busy_start_t: Start time of current busy period
393  * @enable_attr: sysfs attribute to enable/disable clock scaling
394  * @saved_pwr_info: UFS power mode may also be changed during scaling and this
395  * one keeps track of previous power mode.
396  * @workq: workqueue to schedule devfreq suspend/resume work
397  * @suspend_work: worker to suspend devfreq
398  * @resume_work: worker to resume devfreq
399  * @min_gear: lowest HS gear to scale down to
400  * @is_enabled: tracks if scaling is currently enabled or not, controlled by
401  *		clkscale_enable sysfs node
402  * @is_allowed: tracks if scaling is currently allowed or not, used to block
403  *		clock scaling which is not invoked from devfreq governor
404  * @is_initialized: Indicates whether clock scaling is initialized or not
405  * @is_busy_started: tracks if busy period has started or not
406  * @is_suspended: tracks if devfreq is suspended or not
407  */
408 struct ufs_clk_scaling {
409 	int active_reqs;
410 	unsigned long tot_busy_t;
411 	ktime_t window_start_t;
412 	ktime_t busy_start_t;
413 	struct device_attribute enable_attr;
414 	struct ufs_saved_pwr_info saved_pwr_info;
415 	struct workqueue_struct *workq;
416 	struct work_struct suspend_work;
417 	struct work_struct resume_work;
418 	u32 min_gear;
419 	bool is_enabled;
420 	bool is_allowed;
421 	bool is_initialized;
422 	bool is_busy_started;
423 	bool is_suspended;
424 };
425 
426 #define UFS_EVENT_HIST_LENGTH 8
427 /**
428  * struct ufs_event_hist - keeps history of errors
429  * @pos: index to indicate cyclic buffer position
430  * @val: cyclic buffer for registers value
431  * @tstamp: cyclic buffer for time stamp
432  * @cnt: error counter
433  */
434 struct ufs_event_hist {
435 	int pos;
436 	u32 val[UFS_EVENT_HIST_LENGTH];
437 	u64 tstamp[UFS_EVENT_HIST_LENGTH];
438 	unsigned long long cnt;
439 };
440 
441 /**
442  * struct ufs_stats - keeps usage/err statistics
443  * @last_intr_status: record the last interrupt status.
444  * @last_intr_ts: record the last interrupt timestamp.
445  * @hibern8_exit_cnt: Counter to keep track of number of exits,
446  *		reset this after link-startup.
447  * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
448  *		Clear after the first successful command completion.
449  * @event: array with event history.
450  */
451 struct ufs_stats {
452 	u32 last_intr_status;
453 	u64 last_intr_ts;
454 
455 	u32 hibern8_exit_cnt;
456 	u64 last_hibern8_exit_tstamp;
457 	struct ufs_event_hist event[UFS_EVT_CNT];
458 };
459 
460 /**
461  * enum ufshcd_state - UFS host controller state
462  * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
463  *	processing.
464  * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
465  *	SCSI commands.
466  * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
467  *	SCSI commands may be submitted to the controller.
468  * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
469  *	newly submitted SCSI commands with error code DID_BAD_TARGET.
470  * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
471  *	failed. Fail all SCSI commands with error code DID_ERROR.
472  */
473 enum ufshcd_state {
474 	UFSHCD_STATE_RESET,
475 	UFSHCD_STATE_OPERATIONAL,
476 	UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
477 	UFSHCD_STATE_EH_SCHEDULED_FATAL,
478 	UFSHCD_STATE_ERROR,
479 };
480 
481 enum ufshcd_quirks {
482 	/* Interrupt aggregation support is broken */
483 	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
484 
485 	/*
486 	 * delay before each dme command is required as the unipro
487 	 * layer has shown instabilities
488 	 */
489 	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
490 
491 	/*
492 	 * If UFS host controller is having issue in processing LCC (Line
493 	 * Control Command) coming from device then enable this quirk.
494 	 * When this quirk is enabled, host controller driver should disable
495 	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
496 	 * attribute of device to 0).
497 	 */
498 	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
499 
500 	/*
501 	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
502 	 * inbound Link supports unterminated line in HS mode. Setting this
503 	 * attribute to 1 fixes moving to HS gear.
504 	 */
505 	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
506 
507 	/*
508 	 * This quirk needs to be enabled if the host controller only allows
509 	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
510 	 * SLOW AUTO).
511 	 */
512 	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
513 
514 	/*
515 	 * This quirk needs to be enabled if the host controller doesn't
516 	 * advertise the correct version in UFS_VER register. If this quirk
517 	 * is enabled, standard UFS host driver will call the vendor specific
518 	 * ops (get_ufs_hci_version) to get the correct version.
519 	 */
520 	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
521 
522 	/*
523 	 * Clear handling for transfer/task request list is just opposite.
524 	 */
525 	UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR		= 1 << 6,
526 
527 	/*
528 	 * This quirk needs to be enabled if host controller doesn't allow
529 	 * that the interrupt aggregation timer and counter are reset by s/w.
530 	 */
531 	UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR		= 1 << 7,
532 
533 	/*
534 	 * This quirks needs to be enabled if host controller cannot be
535 	 * enabled via HCE register.
536 	 */
537 	UFSHCI_QUIRK_BROKEN_HCE				= 1 << 8,
538 
539 	/*
540 	 * This quirk needs to be enabled if the host controller regards
541 	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
542 	 */
543 	UFSHCD_QUIRK_PRDT_BYTE_GRAN			= 1 << 9,
544 
545 	/*
546 	 * This quirk needs to be enabled if the host controller reports
547 	 * OCS FATAL ERROR with device error through sense data
548 	 */
549 	UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR		= 1 << 10,
550 
551 	/*
552 	 * This quirk needs to be enabled if the host controller has
553 	 * auto-hibernate capability but it doesn't work.
554 	 */
555 	UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8		= 1 << 11,
556 
557 	/*
558 	 * This quirk needs to disable manual flush for write booster
559 	 */
560 	UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL		= 1 << 12,
561 
562 	/*
563 	 * This quirk needs to disable unipro timeout values
564 	 * before power mode change
565 	 */
566 	UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
567 
568 	/*
569 	 * This quirk allows only sg entries aligned with page size.
570 	 */
571 	UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE		= 1 << 14,
572 
573 	/*
574 	 * This quirk needs to be enabled if the host controller does not
575 	 * support UIC command
576 	 */
577 	UFSHCD_QUIRK_BROKEN_UIC_CMD			= 1 << 15,
578 
579 	/*
580 	 * This quirk needs to be enabled if the host controller cannot
581 	 * support physical host configuration.
582 	 */
583 	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
584 
585 	/*
586 	 * This quirk needs to be enabled if the host controller has
587 	 * 64-bit addressing supported capability but it doesn't work.
588 	 */
589 	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
590 
591 	/*
592 	 * This quirk needs to be enabled if the host controller has
593 	 * auto-hibernate capability but it's FASTAUTO only.
594 	 */
595 	UFSHCD_QUIRK_HIBERN_FASTAUTO			= 1 << 18,
596 };
597 
598 enum ufshcd_caps {
599 	/* Allow dynamic clk gating */
600 	UFSHCD_CAP_CLK_GATING				= 1 << 0,
601 
602 	/* Allow hiberb8 with clk gating */
603 	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
604 
605 	/* Allow dynamic clk scaling */
606 	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
607 
608 	/* Allow auto bkops to enabled during runtime suspend */
609 	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
610 
611 	/*
612 	 * This capability allows host controller driver to use the UFS HCI's
613 	 * interrupt aggregation capability.
614 	 * CAUTION: Enabling this might reduce overall UFS throughput.
615 	 */
616 	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
617 
618 	/*
619 	 * This capability allows the device auto-bkops to be always enabled
620 	 * except during suspend (both runtime and suspend).
621 	 * Enabling this capability means that device will always be allowed
622 	 * to do background operation when it's active but it might degrade
623 	 * the performance of ongoing read/write operations.
624 	 */
625 	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
626 
627 	/*
628 	 * This capability allows host controller driver to automatically
629 	 * enable runtime power management by itself instead of waiting
630 	 * for userspace to control the power management.
631 	 */
632 	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
633 
634 	/*
635 	 * This capability allows the host controller driver to turn-on
636 	 * WriteBooster, if the underlying device supports it and is
637 	 * provisioned to be used. This would increase the write performance.
638 	 */
639 	UFSHCD_CAP_WB_EN				= 1 << 7,
640 
641 	/*
642 	 * This capability allows the host controller driver to use the
643 	 * inline crypto engine, if it is present
644 	 */
645 	UFSHCD_CAP_CRYPTO				= 1 << 8,
646 
647 	/*
648 	 * This capability allows the controller regulators to be put into
649 	 * lpm mode aggressively during clock gating.
650 	 * This would increase power savings.
651 	 */
652 	UFSHCD_CAP_AGGR_POWER_COLLAPSE			= 1 << 9,
653 
654 	/*
655 	 * This capability allows the host controller driver to use DeepSleep,
656 	 * if it is supported by the UFS device. The host controller driver must
657 	 * support device hardware reset via the hba->device_reset() callback,
658 	 * in order to exit DeepSleep state.
659 	 */
660 	UFSHCD_CAP_DEEPSLEEP				= 1 << 10,
661 
662 	/*
663 	 * This capability allows the host controller driver to use temperature
664 	 * notification if it is supported by the UFS device.
665 	 */
666 	UFSHCD_CAP_TEMP_NOTIF				= 1 << 11,
667 
668 	/*
669 	 * Enable WriteBooster when scaling up the clock and disable
670 	 * WriteBooster when scaling the clock down.
671 	 */
672 	UFSHCD_CAP_WB_WITH_CLK_SCALING			= 1 << 12,
673 };
674 
675 struct ufs_hba_variant_params {
676 	struct devfreq_dev_profile devfreq_profile;
677 	struct devfreq_simple_ondemand_data ondemand_data;
678 	u16 hba_enable_delay_us;
679 	u32 wb_flush_threshold;
680 };
681 
682 #ifdef CONFIG_SCSI_UFS_HPB
683 /**
684  * struct ufshpb_dev_info - UFSHPB device related info
685  * @num_lu: the number of user logical unit to check whether all lu finished
686  *          initialization
687  * @rgn_size: device reported HPB region size
688  * @srgn_size: device reported HPB sub-region size
689  * @slave_conf_cnt: counter to check all lu finished initialization
690  * @hpb_disabled: flag to check if HPB is disabled
691  * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
692  * @is_legacy: flag to check HPB 1.0
693  * @control_mode: either host or device
694  */
695 struct ufshpb_dev_info {
696 	int num_lu;
697 	int rgn_size;
698 	int srgn_size;
699 	atomic_t slave_conf_cnt;
700 	bool hpb_disabled;
701 	u8 max_hpb_single_cmd;
702 	bool is_legacy;
703 	u8 control_mode;
704 };
705 #endif
706 
707 struct ufs_hba_monitor {
708 	unsigned long chunk_size;
709 
710 	unsigned long nr_sec_rw[2];
711 	ktime_t total_busy[2];
712 
713 	unsigned long nr_req[2];
714 	/* latencies*/
715 	ktime_t lat_sum[2];
716 	ktime_t lat_max[2];
717 	ktime_t lat_min[2];
718 
719 	u32 nr_queued[2];
720 	ktime_t busy_start_ts[2];
721 
722 	ktime_t enabled_ts;
723 	bool enabled;
724 };
725 
726 /**
727  * struct ufs_hba - per adapter private structure
728  * @mmio_base: UFSHCI base register address
729  * @ucdl_base_addr: UFS Command Descriptor base address
730  * @utrdl_base_addr: UTP Transfer Request Descriptor base address
731  * @utmrdl_base_addr: UTP Task Management Descriptor base address
732  * @ucdl_dma_addr: UFS Command Descriptor DMA address
733  * @utrdl_dma_addr: UTRDL DMA address
734  * @utmrdl_dma_addr: UTMRDL DMA address
735  * @host: Scsi_Host instance of the driver
736  * @dev: device handle
737  * @ufs_device_wlun: WLUN that controls the entire UFS device.
738  * @hwmon_device: device instance registered with the hwmon core.
739  * @curr_dev_pwr_mode: active UFS device power mode.
740  * @uic_link_state: active state of the link to the UFS device.
741  * @rpm_lvl: desired UFS power management level during runtime PM.
742  * @spm_lvl: desired UFS power management level during system PM.
743  * @pm_op_in_progress: whether or not a PM operation is in progress.
744  * @ahit: value of Auto-Hibernate Idle Timer register.
745  * @lrb: local reference block
746  * @outstanding_tasks: Bits representing outstanding task requests
747  * @outstanding_lock: Protects @outstanding_reqs.
748  * @outstanding_reqs: Bits representing outstanding transfer requests
749  * @capabilities: UFS Controller Capabilities
750  * @nutrs: Transfer Request Queue depth supported by controller
751  * @nutmrs: Task Management Queue depth supported by controller
752  * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
753  * @ufs_version: UFS Version to which controller complies
754  * @vops: pointer to variant specific operations
755  * @vps: pointer to variant specific parameters
756  * @priv: pointer to variant specific private data
757  * @irq: Irq number of the controller
758  * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
759  * @dev_ref_clk_freq: reference clock frequency
760  * @quirks: bitmask with information about deviations from the UFSHCI standard.
761  * @dev_quirks: bitmask with information about deviations from the UFS standard.
762  * @tmf_tag_set: TMF tag set.
763  * @tmf_queue: Used to allocate TMF tags.
764  * @tmf_rqs: array with pointers to TMF requests while these are in progress.
765  * @active_uic_cmd: handle of active UIC command
766  * @uic_cmd_mutex: mutex for UIC command
767  * @uic_async_done: completion used during UIC processing
768  * @ufshcd_state: UFSHCD state
769  * @eh_flags: Error handling flags
770  * @intr_mask: Interrupt Mask Bits
771  * @ee_ctrl_mask: Exception event control mask
772  * @ee_drv_mask: Exception event mask for driver
773  * @ee_usr_mask: Exception event mask for user (set via debugfs)
774  * @ee_ctrl_mutex: Used to serialize exception event information.
775  * @is_powered: flag to check if HBA is powered
776  * @shutting_down: flag to check if shutdown has been invoked
777  * @host_sem: semaphore used to serialize concurrent contexts
778  * @eh_wq: Workqueue that eh_work works on
779  * @eh_work: Worker to handle UFS errors that require s/w attention
780  * @eeh_work: Worker to handle exception events
781  * @errors: HBA errors
782  * @uic_error: UFS interconnect layer error status
783  * @saved_err: sticky error mask
784  * @saved_uic_err: sticky UIC error mask
785  * @ufs_stats: various error counters
786  * @force_reset: flag to force eh_work perform a full reset
787  * @force_pmc: flag to force a power mode change
788  * @silence_err_logs: flag to silence error logs
789  * @dev_cmd: ufs device management command information
790  * @last_dme_cmd_tstamp: time stamp of the last completed DME command
791  * @nop_out_timeout: NOP OUT timeout value
792  * @dev_info: information about the UFS device
793  * @auto_bkops_enabled: to track whether bkops is enabled in device
794  * @vreg_info: UFS device voltage regulator information
795  * @clk_list_head: UFS host controller clocks list node head
796  * @req_abort_count: number of times ufshcd_abort() has been called
797  * @lanes_per_direction: number of lanes per data direction between the UFS
798  *	controller and the UFS device.
799  * @pwr_info: holds current power mode
800  * @max_pwr_info: keeps the device max valid pwm
801  * @clk_gating: information related to clock gating
802  * @caps: bitmask with information about UFS controller capabilities
803  * @devfreq: frequency scaling information owned by the devfreq core
804  * @clk_scaling: frequency scaling information owned by the UFS driver
805  * @system_suspending: system suspend has been started and system resume has
806  *	not yet finished.
807  * @is_sys_suspended: UFS device has been suspended because of system suspend
808  * @urgent_bkops_lvl: keeps track of urgent bkops level for device
809  * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
810  *  device is known or not.
811  * @clk_scaling_lock: used to serialize device commands and clock scaling
812  * @desc_size: descriptor sizes reported by device
813  * @scsi_block_reqs_cnt: reference counting for scsi block requests
814  * @bsg_dev: struct device associated with the BSG queue
815  * @bsg_queue: BSG queue associated with the UFS controller
816  * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
817  *	management) after the UFS device has finished a WriteBooster buffer
818  *	flush or auto BKOP.
819  * @ufshpb_dev: information related to HPB (Host Performance Booster).
820  * @monitor: statistics about UFS commands
821  * @crypto_capabilities: Content of crypto capabilities register (0x100)
822  * @crypto_cap_array: Array of crypto capabilities
823  * @crypto_cfg_register: Start of the crypto cfg array
824  * @crypto_profile: the crypto profile of this hba (if applicable)
825  * @debugfs_root: UFS controller debugfs root directory
826  * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
827  * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
828  *	ee_ctrl_mask
829  * @luns_avail: number of regular and well known LUNs supported by the UFS
830  *	device
831  * @complete_put: whether or not to call ufshcd_rpm_put() from inside
832  *	ufshcd_resume_complete()
833  */
834 struct ufs_hba {
835 	void __iomem *mmio_base;
836 
837 	/* Virtual memory reference */
838 	struct utp_transfer_cmd_desc *ucdl_base_addr;
839 	struct utp_transfer_req_desc *utrdl_base_addr;
840 	struct utp_task_req_desc *utmrdl_base_addr;
841 
842 	/* DMA memory reference */
843 	dma_addr_t ucdl_dma_addr;
844 	dma_addr_t utrdl_dma_addr;
845 	dma_addr_t utmrdl_dma_addr;
846 
847 	struct Scsi_Host *host;
848 	struct device *dev;
849 	struct scsi_device *ufs_device_wlun;
850 
851 #ifdef CONFIG_SCSI_UFS_HWMON
852 	struct device *hwmon_device;
853 #endif
854 
855 	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
856 	enum uic_link_state uic_link_state;
857 	/* Desired UFS power management level during runtime PM */
858 	enum ufs_pm_level rpm_lvl;
859 	/* Desired UFS power management level during system PM */
860 	enum ufs_pm_level spm_lvl;
861 	int pm_op_in_progress;
862 
863 	/* Auto-Hibernate Idle Timer register value */
864 	u32 ahit;
865 
866 	struct ufshcd_lrb *lrb;
867 
868 	unsigned long outstanding_tasks;
869 	spinlock_t outstanding_lock;
870 	unsigned long outstanding_reqs;
871 
872 	u32 capabilities;
873 	int nutrs;
874 	int nutmrs;
875 	u32 reserved_slot;
876 	u32 ufs_version;
877 	const struct ufs_hba_variant_ops *vops;
878 	struct ufs_hba_variant_params *vps;
879 	void *priv;
880 	unsigned int irq;
881 	bool is_irq_enabled;
882 	enum ufs_ref_clk_freq dev_ref_clk_freq;
883 
884 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
885 
886 	/* Device deviations from standard UFS device spec. */
887 	unsigned int dev_quirks;
888 
889 	struct blk_mq_tag_set tmf_tag_set;
890 	struct request_queue *tmf_queue;
891 	struct request **tmf_rqs;
892 
893 	struct uic_command *active_uic_cmd;
894 	struct mutex uic_cmd_mutex;
895 	struct completion *uic_async_done;
896 
897 	enum ufshcd_state ufshcd_state;
898 	u32 eh_flags;
899 	u32 intr_mask;
900 	u16 ee_ctrl_mask;
901 	u16 ee_drv_mask;
902 	u16 ee_usr_mask;
903 	struct mutex ee_ctrl_mutex;
904 	bool is_powered;
905 	bool shutting_down;
906 	struct semaphore host_sem;
907 
908 	/* Work Queues */
909 	struct workqueue_struct *eh_wq;
910 	struct work_struct eh_work;
911 	struct work_struct eeh_work;
912 
913 	/* HBA Errors */
914 	u32 errors;
915 	u32 uic_error;
916 	u32 saved_err;
917 	u32 saved_uic_err;
918 	struct ufs_stats ufs_stats;
919 	bool force_reset;
920 	bool force_pmc;
921 	bool silence_err_logs;
922 
923 	/* Device management request data */
924 	struct ufs_dev_cmd dev_cmd;
925 	ktime_t last_dme_cmd_tstamp;
926 	int nop_out_timeout;
927 
928 	/* Keeps information of the UFS device connected to this host */
929 	struct ufs_dev_info dev_info;
930 	bool auto_bkops_enabled;
931 	struct ufs_vreg_info vreg_info;
932 	struct list_head clk_list_head;
933 
934 	/* Number of requests aborts */
935 	int req_abort_count;
936 
937 	/* Number of lanes available (1 or 2) for Rx/Tx */
938 	u32 lanes_per_direction;
939 	struct ufs_pa_layer_attr pwr_info;
940 	struct ufs_pwr_mode_info max_pwr_info;
941 
942 	struct ufs_clk_gating clk_gating;
943 	/* Control to enable/disable host capabilities */
944 	u32 caps;
945 
946 	struct devfreq *devfreq;
947 	struct ufs_clk_scaling clk_scaling;
948 	bool system_suspending;
949 	bool is_sys_suspended;
950 
951 	enum bkops_status urgent_bkops_lvl;
952 	bool is_urgent_bkops_lvl_checked;
953 
954 	struct rw_semaphore clk_scaling_lock;
955 	unsigned char desc_size[QUERY_DESC_IDN_MAX];
956 	atomic_t scsi_block_reqs_cnt;
957 
958 	struct device		bsg_dev;
959 	struct request_queue	*bsg_queue;
960 	struct delayed_work rpm_dev_flush_recheck_work;
961 
962 #ifdef CONFIG_SCSI_UFS_HPB
963 	struct ufshpb_dev_info ufshpb_dev;
964 #endif
965 
966 	struct ufs_hba_monitor	monitor;
967 
968 #ifdef CONFIG_SCSI_UFS_CRYPTO
969 	union ufs_crypto_capabilities crypto_capabilities;
970 	union ufs_crypto_cap_entry *crypto_cap_array;
971 	u32 crypto_cfg_register;
972 	struct blk_crypto_profile crypto_profile;
973 #endif
974 #ifdef CONFIG_DEBUG_FS
975 	struct dentry *debugfs_root;
976 	struct delayed_work debugfs_ee_work;
977 	u32 debugfs_ee_rate_limit_ms;
978 #endif
979 	u32 luns_avail;
980 	bool complete_put;
981 };
982 
983 /* Returns true if clocks can be gated. Otherwise false */
984 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
985 {
986 	return hba->caps & UFSHCD_CAP_CLK_GATING;
987 }
988 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
989 {
990 	return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
991 }
992 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
993 {
994 	return hba->caps & UFSHCD_CAP_CLK_SCALING;
995 }
996 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
997 {
998 	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
999 }
1000 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
1001 {
1002 	return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
1003 }
1004 
1005 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
1006 {
1007 	return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
1008 		!(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
1009 }
1010 
1011 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
1012 {
1013 	return !!(ufshcd_is_link_hibern8(hba) &&
1014 		  (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
1015 }
1016 
1017 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
1018 {
1019 	return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
1020 		!(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
1021 }
1022 
1023 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
1024 {
1025 	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
1026 }
1027 
1028 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
1029 {
1030 	return hba->caps & UFSHCD_CAP_WB_EN;
1031 }
1032 
1033 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba)
1034 {
1035 	return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING;
1036 }
1037 
1038 #define ufshcd_writel(hba, val, reg)	\
1039 	writel((val), (hba)->mmio_base + (reg))
1040 #define ufshcd_readl(hba, reg)	\
1041 	readl((hba)->mmio_base + (reg))
1042 
1043 /**
1044  * ufshcd_rmwl - perform read/modify/write for a controller register
1045  * @hba: per adapter instance
1046  * @mask: mask to apply on read value
1047  * @val: actual value to write
1048  * @reg: register address
1049  */
1050 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
1051 {
1052 	u32 tmp;
1053 
1054 	tmp = ufshcd_readl(hba, reg);
1055 	tmp &= ~mask;
1056 	tmp |= (val & mask);
1057 	ufshcd_writel(hba, tmp, reg);
1058 }
1059 
1060 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
1061 void ufshcd_dealloc_host(struct ufs_hba *);
1062 int ufshcd_hba_enable(struct ufs_hba *hba);
1063 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
1064 int ufshcd_link_recovery(struct ufs_hba *hba);
1065 int ufshcd_make_hba_operational(struct ufs_hba *hba);
1066 void ufshcd_remove(struct ufs_hba *);
1067 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
1068 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
1069 void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
1070 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
1071 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
1072 void ufshcd_hba_stop(struct ufs_hba *hba);
1073 void ufshcd_schedule_eh_work(struct ufs_hba *hba);
1074 
1075 /**
1076  * ufshcd_set_variant - set variant specific data to the hba
1077  * @hba: per adapter instance
1078  * @variant: pointer to variant specific data
1079  */
1080 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
1081 {
1082 	BUG_ON(!hba);
1083 	hba->priv = variant;
1084 }
1085 
1086 /**
1087  * ufshcd_get_variant - get variant specific data from the hba
1088  * @hba: per adapter instance
1089  */
1090 static inline void *ufshcd_get_variant(struct ufs_hba *hba)
1091 {
1092 	BUG_ON(!hba);
1093 	return hba->priv;
1094 }
1095 
1096 #ifdef CONFIG_PM
1097 extern int ufshcd_runtime_suspend(struct device *dev);
1098 extern int ufshcd_runtime_resume(struct device *dev);
1099 #endif
1100 #ifdef CONFIG_PM_SLEEP
1101 extern int ufshcd_system_suspend(struct device *dev);
1102 extern int ufshcd_system_resume(struct device *dev);
1103 #endif
1104 extern int ufshcd_shutdown(struct ufs_hba *hba);
1105 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
1106 				      int agreed_gear,
1107 				      int adapt_val);
1108 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
1109 			       u8 attr_set, u32 mib_val, u8 peer);
1110 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
1111 			       u32 *mib_val, u8 peer);
1112 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
1113 			struct ufs_pa_layer_attr *desired_pwr_mode);
1114 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
1115 
1116 /* UIC command interfaces for DME primitives */
1117 #define DME_LOCAL	0
1118 #define DME_PEER	1
1119 #define ATTR_SET_NOR	0	/* NORMAL */
1120 #define ATTR_SET_ST	1	/* STATIC */
1121 
1122 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
1123 				 u32 mib_val)
1124 {
1125 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1126 				   mib_val, DME_LOCAL);
1127 }
1128 
1129 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
1130 				    u32 mib_val)
1131 {
1132 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1133 				   mib_val, DME_LOCAL);
1134 }
1135 
1136 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
1137 				      u32 mib_val)
1138 {
1139 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1140 				   mib_val, DME_PEER);
1141 }
1142 
1143 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
1144 					 u32 mib_val)
1145 {
1146 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1147 				   mib_val, DME_PEER);
1148 }
1149 
1150 static inline int ufshcd_dme_get(struct ufs_hba *hba,
1151 				 u32 attr_sel, u32 *mib_val)
1152 {
1153 	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
1154 }
1155 
1156 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
1157 				      u32 attr_sel, u32 *mib_val)
1158 {
1159 	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
1160 }
1161 
1162 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
1163 {
1164 	return (pwr_info->pwr_rx == FAST_MODE ||
1165 		pwr_info->pwr_rx == FASTAUTO_MODE) &&
1166 		(pwr_info->pwr_tx == FAST_MODE ||
1167 		pwr_info->pwr_tx == FASTAUTO_MODE);
1168 }
1169 
1170 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
1171 {
1172 	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
1173 }
1174 
1175 void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
1176 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
1177 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
1178 			     const struct ufs_dev_quirk *fixups);
1179 #define SD_ASCII_STD true
1180 #define SD_RAW false
1181 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
1182 			    u8 **buf, bool ascii);
1183 
1184 int ufshcd_hold(struct ufs_hba *hba, bool async);
1185 void ufshcd_release(struct ufs_hba *hba);
1186 
1187 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
1188 
1189 void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
1190 				  int *desc_length);
1191 
1192 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
1193 
1194 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
1195 
1196 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
1197 
1198 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
1199 			     struct utp_upiu_req *req_upiu,
1200 			     struct utp_upiu_req *rsp_upiu,
1201 			     int msgcode,
1202 			     u8 *desc_buff, int *buff_len,
1203 			     enum query_opcode desc_op);
1204 
1205 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
1206 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable);
1207 int ufshcd_suspend_prepare(struct device *dev);
1208 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
1209 void ufshcd_resume_complete(struct device *dev);
1210 
1211 /* Wrapper functions for safely calling variant operations */
1212 static inline int ufshcd_vops_init(struct ufs_hba *hba)
1213 {
1214 	if (hba->vops && hba->vops->init)
1215 		return hba->vops->init(hba);
1216 
1217 	return 0;
1218 }
1219 
1220 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
1221 {
1222 	if (hba->vops && hba->vops->phy_initialization)
1223 		return hba->vops->phy_initialization(hba);
1224 
1225 	return 0;
1226 }
1227 
1228 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
1229 
1230 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
1231 		     const char *prefix);
1232 
1233 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
1234 int ufshcd_write_ee_control(struct ufs_hba *hba);
1235 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask,
1236 			     const u16 *other_mask, u16 set, u16 clr);
1237 
1238 #endif /* End of Header */
1239