1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Universal Flash Storage Host controller driver 4 * Copyright (C) 2011-2013 Samsung India Software Operations 5 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. 6 * 7 * Authors: 8 * Santosh Yaraganavi <santosh.sy@samsung.com> 9 * Vinayak Holikatti <h.vinayak@samsung.com> 10 */ 11 12 #ifndef _UFSHCD_H 13 #define _UFSHCD_H 14 15 #include <linux/bitfield.h> 16 #include <linux/blk-crypto-profile.h> 17 #include <linux/blk-mq.h> 18 #include <linux/devfreq.h> 19 #include <linux/msi.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/dma-direction.h> 22 #include <scsi/scsi_device.h> 23 #include <ufs/unipro.h> 24 #include <ufs/ufs.h> 25 #include <ufs/ufs_quirks.h> 26 #include <ufs/ufshci.h> 27 28 #define UFSHCD "ufshcd" 29 30 struct ufs_hba; 31 32 enum dev_cmd_type { 33 DEV_CMD_TYPE_NOP = 0x0, 34 DEV_CMD_TYPE_QUERY = 0x1, 35 DEV_CMD_TYPE_RPMB = 0x2, 36 }; 37 38 enum ufs_event_type { 39 /* uic specific errors */ 40 UFS_EVT_PA_ERR = 0, 41 UFS_EVT_DL_ERR, 42 UFS_EVT_NL_ERR, 43 UFS_EVT_TL_ERR, 44 UFS_EVT_DME_ERR, 45 46 /* fatal errors */ 47 UFS_EVT_AUTO_HIBERN8_ERR, 48 UFS_EVT_FATAL_ERR, 49 UFS_EVT_LINK_STARTUP_FAIL, 50 UFS_EVT_RESUME_ERR, 51 UFS_EVT_SUSPEND_ERR, 52 UFS_EVT_WL_SUSP_ERR, 53 UFS_EVT_WL_RES_ERR, 54 55 /* abnormal events */ 56 UFS_EVT_DEV_RESET, 57 UFS_EVT_HOST_RESET, 58 UFS_EVT_ABORT, 59 60 UFS_EVT_CNT, 61 }; 62 63 /** 64 * struct uic_command - UIC command structure 65 * @command: UIC command 66 * @argument1: UIC command argument 1 67 * @argument2: UIC command argument 2 68 * @argument3: UIC command argument 3 69 * @cmd_active: Indicate if UIC command is outstanding 70 * @done: UIC command completion 71 */ 72 struct uic_command { 73 u32 command; 74 u32 argument1; 75 u32 argument2; 76 u32 argument3; 77 int cmd_active; 78 struct completion done; 79 }; 80 81 /* Used to differentiate the power management options */ 82 enum ufs_pm_op { 83 UFS_RUNTIME_PM, 84 UFS_SYSTEM_PM, 85 UFS_SHUTDOWN_PM, 86 }; 87 88 /* Host <-> Device UniPro Link state */ 89 enum uic_link_state { 90 UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ 91 UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ 92 UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ 93 UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */ 94 }; 95 96 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE) 97 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \ 98 UIC_LINK_ACTIVE_STATE) 99 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \ 100 UIC_LINK_HIBERN8_STATE) 101 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \ 102 UIC_LINK_BROKEN_STATE) 103 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE) 104 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \ 105 UIC_LINK_ACTIVE_STATE) 106 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ 107 UIC_LINK_HIBERN8_STATE) 108 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \ 109 UIC_LINK_BROKEN_STATE) 110 111 #define ufshcd_set_ufs_dev_active(h) \ 112 ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) 113 #define ufshcd_set_ufs_dev_sleep(h) \ 114 ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) 115 #define ufshcd_set_ufs_dev_poweroff(h) \ 116 ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) 117 #define ufshcd_set_ufs_dev_deepsleep(h) \ 118 ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE) 119 #define ufshcd_is_ufs_dev_active(h) \ 120 ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) 121 #define ufshcd_is_ufs_dev_sleep(h) \ 122 ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) 123 #define ufshcd_is_ufs_dev_poweroff(h) \ 124 ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) 125 #define ufshcd_is_ufs_dev_deepsleep(h) \ 126 ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE) 127 128 /* 129 * UFS Power management levels. 130 * Each level is in increasing order of power savings, except DeepSleep 131 * which is lower than PowerDown with power on but not PowerDown with 132 * power off. 133 */ 134 enum ufs_pm_level { 135 UFS_PM_LVL_0, 136 UFS_PM_LVL_1, 137 UFS_PM_LVL_2, 138 UFS_PM_LVL_3, 139 UFS_PM_LVL_4, 140 UFS_PM_LVL_5, 141 UFS_PM_LVL_6, 142 UFS_PM_LVL_MAX 143 }; 144 145 struct ufs_pm_lvl_states { 146 enum ufs_dev_pwr_mode dev_state; 147 enum uic_link_state link_state; 148 }; 149 150 /** 151 * struct ufshcd_lrb - local reference block 152 * @utr_descriptor_ptr: UTRD address of the command 153 * @ucd_req_ptr: UCD address of the command 154 * @ucd_rsp_ptr: Response UPIU address for this command 155 * @ucd_prdt_ptr: PRDT address of the command 156 * @utrd_dma_addr: UTRD dma address for debug 157 * @ucd_prdt_dma_addr: PRDT dma address for debug 158 * @ucd_rsp_dma_addr: UPIU response dma address for debug 159 * @ucd_req_dma_addr: UPIU request dma address for debug 160 * @cmd: pointer to SCSI command 161 * @scsi_status: SCSI status of the command 162 * @command_type: SCSI, UFS, Query. 163 * @task_tag: Task tag of the command 164 * @lun: LUN of the command 165 * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) 166 * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC) 167 * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock) 168 * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC) 169 * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock) 170 * @crypto_key_slot: the key slot to use for inline crypto (-1 if none) 171 * @data_unit_num: the data unit number for the first block for inline crypto 172 * @req_abort_skip: skip request abort task flag 173 */ 174 struct ufshcd_lrb { 175 struct utp_transfer_req_desc *utr_descriptor_ptr; 176 struct utp_upiu_req *ucd_req_ptr; 177 struct utp_upiu_rsp *ucd_rsp_ptr; 178 struct ufshcd_sg_entry *ucd_prdt_ptr; 179 180 dma_addr_t utrd_dma_addr; 181 dma_addr_t ucd_req_dma_addr; 182 dma_addr_t ucd_rsp_dma_addr; 183 dma_addr_t ucd_prdt_dma_addr; 184 185 struct scsi_cmnd *cmd; 186 int scsi_status; 187 188 int command_type; 189 int task_tag; 190 u8 lun; /* UPIU LUN id field is only 8-bit wide */ 191 bool intr_cmd; 192 ktime_t issue_time_stamp; 193 u64 issue_time_stamp_local_clock; 194 ktime_t compl_time_stamp; 195 u64 compl_time_stamp_local_clock; 196 #ifdef CONFIG_SCSI_UFS_CRYPTO 197 int crypto_key_slot; 198 u64 data_unit_num; 199 #endif 200 201 bool req_abort_skip; 202 }; 203 204 /** 205 * struct ufs_query - holds relevant data structures for query request 206 * @request: request upiu and function 207 * @descriptor: buffer for sending/receiving descriptor 208 * @response: response upiu and response 209 */ 210 struct ufs_query { 211 struct ufs_query_req request; 212 u8 *descriptor; 213 struct ufs_query_res response; 214 }; 215 216 /** 217 * struct ufs_dev_cmd - all assosiated fields with device management commands 218 * @type: device management command type - Query, NOP OUT 219 * @lock: lock to allow one command at a time 220 * @complete: internal commands completion 221 * @query: Device management query information 222 */ 223 struct ufs_dev_cmd { 224 enum dev_cmd_type type; 225 struct mutex lock; 226 struct completion *complete; 227 struct ufs_query query; 228 struct cq_entry *cqe; 229 }; 230 231 /** 232 * struct ufs_clk_info - UFS clock related info 233 * @list: list headed by hba->clk_list_head 234 * @clk: clock node 235 * @name: clock name 236 * @max_freq: maximum frequency supported by the clock 237 * @min_freq: min frequency that can be used for clock scaling 238 * @curr_freq: indicates the current frequency that it is set to 239 * @keep_link_active: indicates that the clk should not be disabled if 240 * link is active 241 * @enabled: variable to check against multiple enable/disable 242 */ 243 struct ufs_clk_info { 244 struct list_head list; 245 struct clk *clk; 246 const char *name; 247 u32 max_freq; 248 u32 min_freq; 249 u32 curr_freq; 250 bool keep_link_active; 251 bool enabled; 252 }; 253 254 enum ufs_notify_change_status { 255 PRE_CHANGE, 256 POST_CHANGE, 257 }; 258 259 struct ufs_pa_layer_attr { 260 u32 gear_rx; 261 u32 gear_tx; 262 u32 lane_rx; 263 u32 lane_tx; 264 u32 pwr_rx; 265 u32 pwr_tx; 266 u32 hs_rate; 267 }; 268 269 struct ufs_pwr_mode_info { 270 bool is_valid; 271 struct ufs_pa_layer_attr info; 272 }; 273 274 /** 275 * struct ufs_hba_variant_ops - variant specific callbacks 276 * @name: variant name 277 * @init: called when the driver is initialized 278 * @exit: called to cleanup everything done in init 279 * @get_ufs_hci_version: called to get UFS HCI version 280 * @clk_scale_notify: notifies that clks are scaled up/down 281 * @setup_clocks: called before touching any of the controller registers 282 * @hce_enable_notify: called before and after HCE enable bit is set to allow 283 * variant specific Uni-Pro initialization. 284 * @link_startup_notify: called before and after Link startup is carried out 285 * to allow variant specific Uni-Pro initialization. 286 * @pwr_change_notify: called before and after a power mode change 287 * is carried out to allow vendor spesific capabilities 288 * to be set. 289 * @setup_xfer_req: called before any transfer request is issued 290 * to set some things 291 * @setup_task_mgmt: called before any task management request is issued 292 * to set some things 293 * @hibern8_notify: called around hibern8 enter/exit 294 * @apply_dev_quirks: called to apply device specific quirks 295 * @fixup_dev_quirks: called to modify device specific quirks 296 * @suspend: called during host controller PM callback 297 * @resume: called during host controller PM callback 298 * @dbg_register_dump: used to dump controller debug information 299 * @phy_initialization: used to initialize phys 300 * @device_reset: called to issue a reset pulse on the UFS device 301 * @config_scaling_param: called to configure clock scaling parameters 302 * @program_key: program or evict an inline encryption key 303 * @event_notify: called to notify important events 304 * @reinit_notify: called to notify reinit of UFSHCD during max gear switch 305 * @mcq_config_resource: called to configure MCQ platform resources 306 * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode 307 * @op_runtime_config: called to config Operation and runtime regs Pointers 308 * @get_outstanding_cqs: called to get outstanding completion queues 309 * @config_esi: called to config Event Specific Interrupt 310 */ 311 struct ufs_hba_variant_ops { 312 const char *name; 313 int (*init)(struct ufs_hba *); 314 void (*exit)(struct ufs_hba *); 315 u32 (*get_ufs_hci_version)(struct ufs_hba *); 316 int (*clk_scale_notify)(struct ufs_hba *, bool, 317 enum ufs_notify_change_status); 318 int (*setup_clocks)(struct ufs_hba *, bool, 319 enum ufs_notify_change_status); 320 int (*hce_enable_notify)(struct ufs_hba *, 321 enum ufs_notify_change_status); 322 int (*link_startup_notify)(struct ufs_hba *, 323 enum ufs_notify_change_status); 324 int (*pwr_change_notify)(struct ufs_hba *, 325 enum ufs_notify_change_status status, 326 struct ufs_pa_layer_attr *, 327 struct ufs_pa_layer_attr *); 328 void (*setup_xfer_req)(struct ufs_hba *hba, int tag, 329 bool is_scsi_cmd); 330 void (*setup_task_mgmt)(struct ufs_hba *, int, u8); 331 void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme, 332 enum ufs_notify_change_status); 333 int (*apply_dev_quirks)(struct ufs_hba *hba); 334 void (*fixup_dev_quirks)(struct ufs_hba *hba); 335 int (*suspend)(struct ufs_hba *, enum ufs_pm_op, 336 enum ufs_notify_change_status); 337 int (*resume)(struct ufs_hba *, enum ufs_pm_op); 338 void (*dbg_register_dump)(struct ufs_hba *hba); 339 int (*phy_initialization)(struct ufs_hba *); 340 int (*device_reset)(struct ufs_hba *hba); 341 void (*config_scaling_param)(struct ufs_hba *hba, 342 struct devfreq_dev_profile *profile, 343 struct devfreq_simple_ondemand_data *data); 344 int (*program_key)(struct ufs_hba *hba, 345 const union ufs_crypto_cfg_entry *cfg, int slot); 346 void (*event_notify)(struct ufs_hba *hba, 347 enum ufs_event_type evt, void *data); 348 void (*reinit_notify)(struct ufs_hba *); 349 int (*mcq_config_resource)(struct ufs_hba *hba); 350 int (*get_hba_mac)(struct ufs_hba *hba); 351 int (*op_runtime_config)(struct ufs_hba *hba); 352 int (*get_outstanding_cqs)(struct ufs_hba *hba, 353 unsigned long *ocqs); 354 int (*config_esi)(struct ufs_hba *hba); 355 }; 356 357 /* clock gating state */ 358 enum clk_gating_state { 359 CLKS_OFF, 360 CLKS_ON, 361 REQ_CLKS_OFF, 362 REQ_CLKS_ON, 363 }; 364 365 /** 366 * struct ufs_clk_gating - UFS clock gating related info 367 * @gate_work: worker to turn off clocks after some delay as specified in 368 * delay_ms 369 * @ungate_work: worker to turn on clocks that will be used in case of 370 * interrupt context 371 * @state: the current clocks state 372 * @delay_ms: gating delay in ms 373 * @is_suspended: clk gating is suspended when set to 1 which can be used 374 * during suspend/resume 375 * @delay_attr: sysfs attribute to control delay_attr 376 * @enable_attr: sysfs attribute to enable/disable clock gating 377 * @is_enabled: Indicates the current status of clock gating 378 * @is_initialized: Indicates whether clock gating is initialized or not 379 * @active_reqs: number of requests that are pending and should be waited for 380 * completion before gating clocks. 381 * @clk_gating_workq: workqueue for clock gating work. 382 */ 383 struct ufs_clk_gating { 384 struct delayed_work gate_work; 385 struct work_struct ungate_work; 386 enum clk_gating_state state; 387 unsigned long delay_ms; 388 bool is_suspended; 389 struct device_attribute delay_attr; 390 struct device_attribute enable_attr; 391 bool is_enabled; 392 bool is_initialized; 393 int active_reqs; 394 struct workqueue_struct *clk_gating_workq; 395 }; 396 397 /** 398 * struct ufs_clk_scaling - UFS clock scaling related data 399 * @active_reqs: number of requests that are pending. If this is zero when 400 * devfreq ->target() function is called then schedule "suspend_work" to 401 * suspend devfreq. 402 * @tot_busy_t: Total busy time in current polling window 403 * @window_start_t: Start time (in jiffies) of the current polling window 404 * @busy_start_t: Start time of current busy period 405 * @enable_attr: sysfs attribute to enable/disable clock scaling 406 * @saved_pwr_info: UFS power mode may also be changed during scaling and this 407 * one keeps track of previous power mode. 408 * @workq: workqueue to schedule devfreq suspend/resume work 409 * @suspend_work: worker to suspend devfreq 410 * @resume_work: worker to resume devfreq 411 * @min_gear: lowest HS gear to scale down to 412 * @is_enabled: tracks if scaling is currently enabled or not, controlled by 413 * clkscale_enable sysfs node 414 * @is_allowed: tracks if scaling is currently allowed or not, used to block 415 * clock scaling which is not invoked from devfreq governor 416 * @is_initialized: Indicates whether clock scaling is initialized or not 417 * @is_busy_started: tracks if busy period has started or not 418 * @is_suspended: tracks if devfreq is suspended or not 419 */ 420 struct ufs_clk_scaling { 421 int active_reqs; 422 unsigned long tot_busy_t; 423 ktime_t window_start_t; 424 ktime_t busy_start_t; 425 struct device_attribute enable_attr; 426 struct ufs_pa_layer_attr saved_pwr_info; 427 struct workqueue_struct *workq; 428 struct work_struct suspend_work; 429 struct work_struct resume_work; 430 u32 min_gear; 431 bool is_enabled; 432 bool is_allowed; 433 bool is_initialized; 434 bool is_busy_started; 435 bool is_suspended; 436 }; 437 438 #define UFS_EVENT_HIST_LENGTH 8 439 /** 440 * struct ufs_event_hist - keeps history of errors 441 * @pos: index to indicate cyclic buffer position 442 * @val: cyclic buffer for registers value 443 * @tstamp: cyclic buffer for time stamp 444 * @cnt: error counter 445 */ 446 struct ufs_event_hist { 447 int pos; 448 u32 val[UFS_EVENT_HIST_LENGTH]; 449 u64 tstamp[UFS_EVENT_HIST_LENGTH]; 450 unsigned long long cnt; 451 }; 452 453 /** 454 * struct ufs_stats - keeps usage/err statistics 455 * @last_intr_status: record the last interrupt status. 456 * @last_intr_ts: record the last interrupt timestamp. 457 * @hibern8_exit_cnt: Counter to keep track of number of exits, 458 * reset this after link-startup. 459 * @last_hibern8_exit_tstamp: Set time after the hibern8 exit. 460 * Clear after the first successful command completion. 461 * @event: array with event history. 462 */ 463 struct ufs_stats { 464 u32 last_intr_status; 465 u64 last_intr_ts; 466 467 u32 hibern8_exit_cnt; 468 u64 last_hibern8_exit_tstamp; 469 struct ufs_event_hist event[UFS_EVT_CNT]; 470 }; 471 472 /** 473 * enum ufshcd_state - UFS host controller state 474 * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command 475 * processing. 476 * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process 477 * SCSI commands. 478 * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. 479 * SCSI commands may be submitted to the controller. 480 * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail 481 * newly submitted SCSI commands with error code DID_BAD_TARGET. 482 * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery 483 * failed. Fail all SCSI commands with error code DID_ERROR. 484 */ 485 enum ufshcd_state { 486 UFSHCD_STATE_RESET, 487 UFSHCD_STATE_OPERATIONAL, 488 UFSHCD_STATE_EH_SCHEDULED_NON_FATAL, 489 UFSHCD_STATE_EH_SCHEDULED_FATAL, 490 UFSHCD_STATE_ERROR, 491 }; 492 493 enum ufshcd_quirks { 494 /* Interrupt aggregation support is broken */ 495 UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, 496 497 /* 498 * delay before each dme command is required as the unipro 499 * layer has shown instabilities 500 */ 501 UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, 502 503 /* 504 * If UFS host controller is having issue in processing LCC (Line 505 * Control Command) coming from device then enable this quirk. 506 * When this quirk is enabled, host controller driver should disable 507 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE 508 * attribute of device to 0). 509 */ 510 UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, 511 512 /* 513 * The attribute PA_RXHSUNTERMCAP specifies whether or not the 514 * inbound Link supports unterminated line in HS mode. Setting this 515 * attribute to 1 fixes moving to HS gear. 516 */ 517 UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, 518 519 /* 520 * This quirk needs to be enabled if the host controller only allows 521 * accessing the peer dme attributes in AUTO mode (FAST AUTO or 522 * SLOW AUTO). 523 */ 524 UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, 525 526 /* 527 * This quirk needs to be enabled if the host controller doesn't 528 * advertise the correct version in UFS_VER register. If this quirk 529 * is enabled, standard UFS host driver will call the vendor specific 530 * ops (get_ufs_hci_version) to get the correct version. 531 */ 532 UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, 533 534 /* 535 * Clear handling for transfer/task request list is just opposite. 536 */ 537 UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6, 538 539 /* 540 * This quirk needs to be enabled if host controller doesn't allow 541 * that the interrupt aggregation timer and counter are reset by s/w. 542 */ 543 UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, 544 545 /* 546 * This quirks needs to be enabled if host controller cannot be 547 * enabled via HCE register. 548 */ 549 UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, 550 551 /* 552 * This quirk needs to be enabled if the host controller regards 553 * resolution of the values of PRDTO and PRDTL in UTRD as byte. 554 */ 555 UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9, 556 557 /* 558 * This quirk needs to be enabled if the host controller reports 559 * OCS FATAL ERROR with device error through sense data 560 */ 561 UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10, 562 563 /* 564 * This quirk needs to be enabled if the host controller has 565 * auto-hibernate capability but it doesn't work. 566 */ 567 UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11, 568 569 /* 570 * This quirk needs to disable manual flush for write booster 571 */ 572 UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, 573 574 /* 575 * This quirk needs to disable unipro timeout values 576 * before power mode change 577 */ 578 UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, 579 580 /* 581 * Align DMA SG entries on a 4 KiB boundary. 582 */ 583 UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14, 584 585 /* 586 * This quirk needs to be enabled if the host controller does not 587 * support UIC command 588 */ 589 UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15, 590 591 /* 592 * This quirk needs to be enabled if the host controller cannot 593 * support physical host configuration. 594 */ 595 UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16, 596 597 /* 598 * This quirk needs to be enabled if the host controller has 599 * 64-bit addressing supported capability but it doesn't work. 600 */ 601 UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS = 1 << 17, 602 603 /* 604 * This quirk needs to be enabled if the host controller has 605 * auto-hibernate capability but it's FASTAUTO only. 606 */ 607 UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18, 608 609 /* 610 * This quirk needs to be enabled if the host controller needs 611 * to reinit the device after switching to maximum gear. 612 */ 613 UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19, 614 }; 615 616 enum ufshcd_caps { 617 /* Allow dynamic clk gating */ 618 UFSHCD_CAP_CLK_GATING = 1 << 0, 619 620 /* Allow hiberb8 with clk gating */ 621 UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1, 622 623 /* Allow dynamic clk scaling */ 624 UFSHCD_CAP_CLK_SCALING = 1 << 2, 625 626 /* Allow auto bkops to enabled during runtime suspend */ 627 UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3, 628 629 /* 630 * This capability allows host controller driver to use the UFS HCI's 631 * interrupt aggregation capability. 632 * CAUTION: Enabling this might reduce overall UFS throughput. 633 */ 634 UFSHCD_CAP_INTR_AGGR = 1 << 4, 635 636 /* 637 * This capability allows the device auto-bkops to be always enabled 638 * except during suspend (both runtime and suspend). 639 * Enabling this capability means that device will always be allowed 640 * to do background operation when it's active but it might degrade 641 * the performance of ongoing read/write operations. 642 */ 643 UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5, 644 645 /* 646 * This capability allows host controller driver to automatically 647 * enable runtime power management by itself instead of waiting 648 * for userspace to control the power management. 649 */ 650 UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6, 651 652 /* 653 * This capability allows the host controller driver to turn-on 654 * WriteBooster, if the underlying device supports it and is 655 * provisioned to be used. This would increase the write performance. 656 */ 657 UFSHCD_CAP_WB_EN = 1 << 7, 658 659 /* 660 * This capability allows the host controller driver to use the 661 * inline crypto engine, if it is present 662 */ 663 UFSHCD_CAP_CRYPTO = 1 << 8, 664 665 /* 666 * This capability allows the controller regulators to be put into 667 * lpm mode aggressively during clock gating. 668 * This would increase power savings. 669 */ 670 UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9, 671 672 /* 673 * This capability allows the host controller driver to use DeepSleep, 674 * if it is supported by the UFS device. The host controller driver must 675 * support device hardware reset via the hba->device_reset() callback, 676 * in order to exit DeepSleep state. 677 */ 678 UFSHCD_CAP_DEEPSLEEP = 1 << 10, 679 680 /* 681 * This capability allows the host controller driver to use temperature 682 * notification if it is supported by the UFS device. 683 */ 684 UFSHCD_CAP_TEMP_NOTIF = 1 << 11, 685 686 /* 687 * Enable WriteBooster when scaling up the clock and disable 688 * WriteBooster when scaling the clock down. 689 */ 690 UFSHCD_CAP_WB_WITH_CLK_SCALING = 1 << 12, 691 }; 692 693 struct ufs_hba_variant_params { 694 struct devfreq_dev_profile devfreq_profile; 695 struct devfreq_simple_ondemand_data ondemand_data; 696 u16 hba_enable_delay_us; 697 u32 wb_flush_threshold; 698 }; 699 700 #ifdef CONFIG_SCSI_UFS_HPB 701 /** 702 * struct ufshpb_dev_info - UFSHPB device related info 703 * @num_lu: the number of user logical unit to check whether all lu finished 704 * initialization 705 * @rgn_size: device reported HPB region size 706 * @srgn_size: device reported HPB sub-region size 707 * @slave_conf_cnt: counter to check all lu finished initialization 708 * @hpb_disabled: flag to check if HPB is disabled 709 * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value 710 * @is_legacy: flag to check HPB 1.0 711 * @control_mode: either host or device 712 */ 713 struct ufshpb_dev_info { 714 int num_lu; 715 int rgn_size; 716 int srgn_size; 717 atomic_t slave_conf_cnt; 718 bool hpb_disabled; 719 u8 max_hpb_single_cmd; 720 bool is_legacy; 721 u8 control_mode; 722 }; 723 #endif 724 725 struct ufs_hba_monitor { 726 unsigned long chunk_size; 727 728 unsigned long nr_sec_rw[2]; 729 ktime_t total_busy[2]; 730 731 unsigned long nr_req[2]; 732 /* latencies*/ 733 ktime_t lat_sum[2]; 734 ktime_t lat_max[2]; 735 ktime_t lat_min[2]; 736 737 u32 nr_queued[2]; 738 ktime_t busy_start_ts[2]; 739 740 ktime_t enabled_ts; 741 bool enabled; 742 }; 743 744 /** 745 * struct ufshcd_res_info_t - MCQ related resource regions 746 * 747 * @name: resource name 748 * @resource: pointer to resource region 749 * @base: register base address 750 */ 751 struct ufshcd_res_info { 752 const char *name; 753 struct resource *resource; 754 void __iomem *base; 755 }; 756 757 enum ufshcd_res { 758 RES_UFS, 759 RES_MCQ, 760 RES_MCQ_SQD, 761 RES_MCQ_SQIS, 762 RES_MCQ_CQD, 763 RES_MCQ_CQIS, 764 RES_MCQ_VS, 765 RES_MAX, 766 }; 767 768 /** 769 * struct ufshcd_mcq_opr_info_t - Operation and Runtime registers 770 * 771 * @offset: Doorbell Address Offset 772 * @stride: Steps proportional to queue [0...31] 773 * @base: base address 774 */ 775 struct ufshcd_mcq_opr_info_t { 776 unsigned long offset; 777 unsigned long stride; 778 void __iomem *base; 779 }; 780 781 enum ufshcd_mcq_opr { 782 OPR_SQD, 783 OPR_SQIS, 784 OPR_CQD, 785 OPR_CQIS, 786 OPR_MAX, 787 }; 788 789 /** 790 * struct ufs_hba - per adapter private structure 791 * @mmio_base: UFSHCI base register address 792 * @ucdl_base_addr: UFS Command Descriptor base address 793 * @utrdl_base_addr: UTP Transfer Request Descriptor base address 794 * @utmrdl_base_addr: UTP Task Management Descriptor base address 795 * @ucdl_dma_addr: UFS Command Descriptor DMA address 796 * @utrdl_dma_addr: UTRDL DMA address 797 * @utmrdl_dma_addr: UTMRDL DMA address 798 * @host: Scsi_Host instance of the driver 799 * @dev: device handle 800 * @ufs_device_wlun: WLUN that controls the entire UFS device. 801 * @hwmon_device: device instance registered with the hwmon core. 802 * @curr_dev_pwr_mode: active UFS device power mode. 803 * @uic_link_state: active state of the link to the UFS device. 804 * @rpm_lvl: desired UFS power management level during runtime PM. 805 * @spm_lvl: desired UFS power management level during system PM. 806 * @pm_op_in_progress: whether or not a PM operation is in progress. 807 * @ahit: value of Auto-Hibernate Idle Timer register. 808 * @lrb: local reference block 809 * @outstanding_tasks: Bits representing outstanding task requests 810 * @outstanding_lock: Protects @outstanding_reqs. 811 * @outstanding_reqs: Bits representing outstanding transfer requests 812 * @capabilities: UFS Controller Capabilities 813 * @mcq_capabilities: UFS Multi Circular Queue capabilities 814 * @nutrs: Transfer Request Queue depth supported by controller 815 * @nutmrs: Task Management Queue depth supported by controller 816 * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock. 817 * @ufs_version: UFS Version to which controller complies 818 * @vops: pointer to variant specific operations 819 * @vps: pointer to variant specific parameters 820 * @priv: pointer to variant specific private data 821 * @sg_entry_size: size of struct ufshcd_sg_entry (may include variant fields) 822 * @irq: Irq number of the controller 823 * @is_irq_enabled: whether or not the UFS controller interrupt is enabled. 824 * @dev_ref_clk_freq: reference clock frequency 825 * @quirks: bitmask with information about deviations from the UFSHCI standard. 826 * @dev_quirks: bitmask with information about deviations from the UFS standard. 827 * @tmf_tag_set: TMF tag set. 828 * @tmf_queue: Used to allocate TMF tags. 829 * @tmf_rqs: array with pointers to TMF requests while these are in progress. 830 * @active_uic_cmd: handle of active UIC command 831 * @uic_cmd_mutex: mutex for UIC command 832 * @uic_async_done: completion used during UIC processing 833 * @ufshcd_state: UFSHCD state 834 * @eh_flags: Error handling flags 835 * @intr_mask: Interrupt Mask Bits 836 * @ee_ctrl_mask: Exception event control mask 837 * @ee_drv_mask: Exception event mask for driver 838 * @ee_usr_mask: Exception event mask for user (set via debugfs) 839 * @ee_ctrl_mutex: Used to serialize exception event information. 840 * @is_powered: flag to check if HBA is powered 841 * @shutting_down: flag to check if shutdown has been invoked 842 * @host_sem: semaphore used to serialize concurrent contexts 843 * @eh_wq: Workqueue that eh_work works on 844 * @eh_work: Worker to handle UFS errors that require s/w attention 845 * @eeh_work: Worker to handle exception events 846 * @errors: HBA errors 847 * @uic_error: UFS interconnect layer error status 848 * @saved_err: sticky error mask 849 * @saved_uic_err: sticky UIC error mask 850 * @ufs_stats: various error counters 851 * @force_reset: flag to force eh_work perform a full reset 852 * @force_pmc: flag to force a power mode change 853 * @silence_err_logs: flag to silence error logs 854 * @dev_cmd: ufs device management command information 855 * @last_dme_cmd_tstamp: time stamp of the last completed DME command 856 * @nop_out_timeout: NOP OUT timeout value 857 * @dev_info: information about the UFS device 858 * @auto_bkops_enabled: to track whether bkops is enabled in device 859 * @vreg_info: UFS device voltage regulator information 860 * @clk_list_head: UFS host controller clocks list node head 861 * @req_abort_count: number of times ufshcd_abort() has been called 862 * @lanes_per_direction: number of lanes per data direction between the UFS 863 * controller and the UFS device. 864 * @pwr_info: holds current power mode 865 * @max_pwr_info: keeps the device max valid pwm 866 * @clk_gating: information related to clock gating 867 * @caps: bitmask with information about UFS controller capabilities 868 * @devfreq: frequency scaling information owned by the devfreq core 869 * @clk_scaling: frequency scaling information owned by the UFS driver 870 * @system_suspending: system suspend has been started and system resume has 871 * not yet finished. 872 * @is_sys_suspended: UFS device has been suspended because of system suspend 873 * @urgent_bkops_lvl: keeps track of urgent bkops level for device 874 * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for 875 * device is known or not. 876 * @wb_mutex: used to serialize devfreq and sysfs write booster toggling 877 * @clk_scaling_lock: used to serialize device commands and clock scaling 878 * @desc_size: descriptor sizes reported by device 879 * @scsi_block_reqs_cnt: reference counting for scsi block requests 880 * @bsg_dev: struct device associated with the BSG queue 881 * @bsg_queue: BSG queue associated with the UFS controller 882 * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power 883 * management) after the UFS device has finished a WriteBooster buffer 884 * flush or auto BKOP. 885 * @ufshpb_dev: information related to HPB (Host Performance Booster). 886 * @monitor: statistics about UFS commands 887 * @crypto_capabilities: Content of crypto capabilities register (0x100) 888 * @crypto_cap_array: Array of crypto capabilities 889 * @crypto_cfg_register: Start of the crypto cfg array 890 * @crypto_profile: the crypto profile of this hba (if applicable) 891 * @debugfs_root: UFS controller debugfs root directory 892 * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay 893 * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore 894 * ee_ctrl_mask 895 * @luns_avail: number of regular and well known LUNs supported by the UFS 896 * device 897 * @nr_hw_queues: number of hardware queues configured 898 * @nr_queues: number of Queues of different queue types 899 * @complete_put: whether or not to call ufshcd_rpm_put() from inside 900 * ufshcd_resume_complete() 901 * @ext_iid_sup: is EXT_IID is supported by UFSHC 902 * @mcq_sup: is mcq supported by UFSHC 903 * @mcq_enabled: is mcq ready to accept requests 904 * @res: array of resource info of MCQ registers 905 * @mcq_base: Multi circular queue registers base address 906 * @uhq: array of supported hardware queues 907 * @dev_cmd_queue: Queue for issuing device management commands 908 */ 909 struct ufs_hba { 910 void __iomem *mmio_base; 911 912 /* Virtual memory reference */ 913 struct utp_transfer_cmd_desc *ucdl_base_addr; 914 struct utp_transfer_req_desc *utrdl_base_addr; 915 struct utp_task_req_desc *utmrdl_base_addr; 916 917 /* DMA memory reference */ 918 dma_addr_t ucdl_dma_addr; 919 dma_addr_t utrdl_dma_addr; 920 dma_addr_t utmrdl_dma_addr; 921 922 struct Scsi_Host *host; 923 struct device *dev; 924 struct scsi_device *ufs_device_wlun; 925 926 #ifdef CONFIG_SCSI_UFS_HWMON 927 struct device *hwmon_device; 928 #endif 929 930 enum ufs_dev_pwr_mode curr_dev_pwr_mode; 931 enum uic_link_state uic_link_state; 932 /* Desired UFS power management level during runtime PM */ 933 enum ufs_pm_level rpm_lvl; 934 /* Desired UFS power management level during system PM */ 935 enum ufs_pm_level spm_lvl; 936 int pm_op_in_progress; 937 938 /* Auto-Hibernate Idle Timer register value */ 939 u32 ahit; 940 941 struct ufshcd_lrb *lrb; 942 943 unsigned long outstanding_tasks; 944 spinlock_t outstanding_lock; 945 unsigned long outstanding_reqs; 946 947 u32 capabilities; 948 int nutrs; 949 u32 mcq_capabilities; 950 int nutmrs; 951 u32 reserved_slot; 952 u32 ufs_version; 953 const struct ufs_hba_variant_ops *vops; 954 struct ufs_hba_variant_params *vps; 955 void *priv; 956 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 957 size_t sg_entry_size; 958 #endif 959 unsigned int irq; 960 bool is_irq_enabled; 961 enum ufs_ref_clk_freq dev_ref_clk_freq; 962 963 unsigned int quirks; /* Deviations from standard UFSHCI spec. */ 964 965 /* Device deviations from standard UFS device spec. */ 966 unsigned int dev_quirks; 967 968 struct blk_mq_tag_set tmf_tag_set; 969 struct request_queue *tmf_queue; 970 struct request **tmf_rqs; 971 972 struct uic_command *active_uic_cmd; 973 struct mutex uic_cmd_mutex; 974 struct completion *uic_async_done; 975 976 enum ufshcd_state ufshcd_state; 977 bool logical_unit_scan_finished; 978 u32 eh_flags; 979 u32 intr_mask; 980 u16 ee_ctrl_mask; 981 u16 ee_drv_mask; 982 u16 ee_usr_mask; 983 struct mutex ee_ctrl_mutex; 984 bool is_powered; 985 bool shutting_down; 986 struct semaphore host_sem; 987 988 /* Work Queues */ 989 struct workqueue_struct *eh_wq; 990 struct work_struct eh_work; 991 struct work_struct eeh_work; 992 993 /* HBA Errors */ 994 u32 errors; 995 u32 uic_error; 996 u32 saved_err; 997 u32 saved_uic_err; 998 struct ufs_stats ufs_stats; 999 bool force_reset; 1000 bool force_pmc; 1001 bool silence_err_logs; 1002 1003 /* Device management request data */ 1004 struct ufs_dev_cmd dev_cmd; 1005 ktime_t last_dme_cmd_tstamp; 1006 int nop_out_timeout; 1007 1008 /* Keeps information of the UFS device connected to this host */ 1009 struct ufs_dev_info dev_info; 1010 bool auto_bkops_enabled; 1011 struct ufs_vreg_info vreg_info; 1012 struct list_head clk_list_head; 1013 1014 /* Number of requests aborts */ 1015 int req_abort_count; 1016 1017 /* Number of lanes available (1 or 2) for Rx/Tx */ 1018 u32 lanes_per_direction; 1019 struct ufs_pa_layer_attr pwr_info; 1020 struct ufs_pwr_mode_info max_pwr_info; 1021 1022 struct ufs_clk_gating clk_gating; 1023 /* Control to enable/disable host capabilities */ 1024 u32 caps; 1025 1026 struct devfreq *devfreq; 1027 struct ufs_clk_scaling clk_scaling; 1028 bool system_suspending; 1029 bool is_sys_suspended; 1030 1031 enum bkops_status urgent_bkops_lvl; 1032 bool is_urgent_bkops_lvl_checked; 1033 1034 struct mutex wb_mutex; 1035 struct rw_semaphore clk_scaling_lock; 1036 atomic_t scsi_block_reqs_cnt; 1037 1038 struct device bsg_dev; 1039 struct request_queue *bsg_queue; 1040 struct delayed_work rpm_dev_flush_recheck_work; 1041 1042 #ifdef CONFIG_SCSI_UFS_HPB 1043 struct ufshpb_dev_info ufshpb_dev; 1044 #endif 1045 1046 struct ufs_hba_monitor monitor; 1047 1048 #ifdef CONFIG_SCSI_UFS_CRYPTO 1049 union ufs_crypto_capabilities crypto_capabilities; 1050 union ufs_crypto_cap_entry *crypto_cap_array; 1051 u32 crypto_cfg_register; 1052 struct blk_crypto_profile crypto_profile; 1053 #endif 1054 #ifdef CONFIG_DEBUG_FS 1055 struct dentry *debugfs_root; 1056 struct delayed_work debugfs_ee_work; 1057 u32 debugfs_ee_rate_limit_ms; 1058 #endif 1059 u32 luns_avail; 1060 unsigned int nr_hw_queues; 1061 unsigned int nr_queues[HCTX_MAX_TYPES]; 1062 bool complete_put; 1063 bool ext_iid_sup; 1064 bool scsi_host_added; 1065 bool mcq_sup; 1066 bool mcq_enabled; 1067 struct ufshcd_res_info res[RES_MAX]; 1068 void __iomem *mcq_base; 1069 struct ufs_hw_queue *uhq; 1070 struct ufs_hw_queue *dev_cmd_queue; 1071 struct ufshcd_mcq_opr_info_t mcq_opr[OPR_MAX]; 1072 }; 1073 1074 /** 1075 * struct ufs_hw_queue - per hardware queue structure 1076 * @mcq_sq_head: base address of submission queue head pointer 1077 * @mcq_sq_tail: base address of submission queue tail pointer 1078 * @mcq_cq_head: base address of completion queue head pointer 1079 * @mcq_cq_tail: base address of completion queue tail pointer 1080 * @sqe_base_addr: submission queue entry base address 1081 * @sqe_dma_addr: submission queue dma address 1082 * @cqe_base_addr: completion queue base address 1083 * @cqe_dma_addr: completion queue dma address 1084 * @max_entries: max number of slots in this hardware queue 1085 * @id: hardware queue ID 1086 * @sq_tp_slot: current slot to which SQ tail pointer is pointing 1087 * @sq_lock: serialize submission queue access 1088 * @cq_tail_slot: current slot to which CQ tail pointer is pointing 1089 * @cq_head_slot: current slot to which CQ head pointer is pointing 1090 * @cq_lock: Synchronize between multiple polling instances 1091 */ 1092 struct ufs_hw_queue { 1093 void __iomem *mcq_sq_head; 1094 void __iomem *mcq_sq_tail; 1095 void __iomem *mcq_cq_head; 1096 void __iomem *mcq_cq_tail; 1097 1098 void *sqe_base_addr; 1099 dma_addr_t sqe_dma_addr; 1100 struct cq_entry *cqe_base_addr; 1101 dma_addr_t cqe_dma_addr; 1102 u32 max_entries; 1103 u32 id; 1104 u32 sq_tail_slot; 1105 spinlock_t sq_lock; 1106 u32 cq_tail_slot; 1107 u32 cq_head_slot; 1108 spinlock_t cq_lock; 1109 }; 1110 1111 static inline bool is_mcq_enabled(struct ufs_hba *hba) 1112 { 1113 return hba->mcq_enabled; 1114 } 1115 1116 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 1117 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1118 { 1119 return hba->sg_entry_size; 1120 } 1121 1122 static inline void ufshcd_set_sg_entry_size(struct ufs_hba *hba, size_t sg_entry_size) 1123 { 1124 WARN_ON_ONCE(sg_entry_size < sizeof(struct ufshcd_sg_entry)); 1125 hba->sg_entry_size = sg_entry_size; 1126 } 1127 #else 1128 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1129 { 1130 return sizeof(struct ufshcd_sg_entry); 1131 } 1132 1133 #define ufshcd_set_sg_entry_size(hba, sg_entry_size) \ 1134 ({ (void)(hba); BUILD_BUG_ON(sg_entry_size != sizeof(struct ufshcd_sg_entry)); }) 1135 #endif 1136 1137 static inline size_t sizeof_utp_transfer_cmd_desc(const struct ufs_hba *hba) 1138 { 1139 return sizeof(struct utp_transfer_cmd_desc) + SG_ALL * ufshcd_sg_entry_size(hba); 1140 } 1141 1142 /* Returns true if clocks can be gated. Otherwise false */ 1143 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba) 1144 { 1145 return hba->caps & UFSHCD_CAP_CLK_GATING; 1146 } 1147 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba) 1148 { 1149 return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; 1150 } 1151 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba) 1152 { 1153 return hba->caps & UFSHCD_CAP_CLK_SCALING; 1154 } 1155 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) 1156 { 1157 return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND; 1158 } 1159 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba) 1160 { 1161 return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND; 1162 } 1163 1164 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) 1165 { 1166 return (hba->caps & UFSHCD_CAP_INTR_AGGR) && 1167 !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR); 1168 } 1169 1170 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba) 1171 { 1172 return !!(ufshcd_is_link_hibern8(hba) && 1173 (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE)); 1174 } 1175 1176 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) 1177 { 1178 return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) && 1179 !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8); 1180 } 1181 1182 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba) 1183 { 1184 return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit); 1185 } 1186 1187 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba) 1188 { 1189 return hba->caps & UFSHCD_CAP_WB_EN; 1190 } 1191 1192 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba) 1193 { 1194 return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING; 1195 } 1196 1197 #define ufsmcq_writel(hba, val, reg) \ 1198 writel((val), (hba)->mcq_base + (reg)) 1199 #define ufsmcq_readl(hba, reg) \ 1200 readl((hba)->mcq_base + (reg)) 1201 1202 #define ufsmcq_writelx(hba, val, reg) \ 1203 writel_relaxed((val), (hba)->mcq_base + (reg)) 1204 #define ufsmcq_readlx(hba, reg) \ 1205 readl_relaxed((hba)->mcq_base + (reg)) 1206 1207 #define ufshcd_writel(hba, val, reg) \ 1208 writel((val), (hba)->mmio_base + (reg)) 1209 #define ufshcd_readl(hba, reg) \ 1210 readl((hba)->mmio_base + (reg)) 1211 1212 /** 1213 * ufshcd_rmwl - perform read/modify/write for a controller register 1214 * @hba: per adapter instance 1215 * @mask: mask to apply on read value 1216 * @val: actual value to write 1217 * @reg: register address 1218 */ 1219 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) 1220 { 1221 u32 tmp; 1222 1223 tmp = ufshcd_readl(hba, reg); 1224 tmp &= ~mask; 1225 tmp |= (val & mask); 1226 ufshcd_writel(hba, tmp, reg); 1227 } 1228 1229 int ufshcd_alloc_host(struct device *, struct ufs_hba **); 1230 void ufshcd_dealloc_host(struct ufs_hba *); 1231 int ufshcd_hba_enable(struct ufs_hba *hba); 1232 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); 1233 int ufshcd_link_recovery(struct ufs_hba *hba); 1234 int ufshcd_make_hba_operational(struct ufs_hba *hba); 1235 void ufshcd_remove(struct ufs_hba *); 1236 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); 1237 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); 1238 void ufshcd_delay_us(unsigned long us, unsigned long tolerance); 1239 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); 1240 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); 1241 void ufshcd_hba_stop(struct ufs_hba *hba); 1242 void ufshcd_schedule_eh_work(struct ufs_hba *hba); 1243 void ufshcd_mcq_write_cqis(struct ufs_hba *hba, u32 val, int i); 1244 unsigned long ufshcd_mcq_poll_cqe_nolock(struct ufs_hba *hba, 1245 struct ufs_hw_queue *hwq); 1246 void ufshcd_mcq_enable_esi(struct ufs_hba *hba); 1247 void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg); 1248 1249 /** 1250 * ufshcd_set_variant - set variant specific data to the hba 1251 * @hba: per adapter instance 1252 * @variant: pointer to variant specific data 1253 */ 1254 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant) 1255 { 1256 BUG_ON(!hba); 1257 hba->priv = variant; 1258 } 1259 1260 /** 1261 * ufshcd_get_variant - get variant specific data from the hba 1262 * @hba: per adapter instance 1263 */ 1264 static inline void *ufshcd_get_variant(struct ufs_hba *hba) 1265 { 1266 BUG_ON(!hba); 1267 return hba->priv; 1268 } 1269 1270 #ifdef CONFIG_PM 1271 extern int ufshcd_runtime_suspend(struct device *dev); 1272 extern int ufshcd_runtime_resume(struct device *dev); 1273 #endif 1274 #ifdef CONFIG_PM_SLEEP 1275 extern int ufshcd_system_suspend(struct device *dev); 1276 extern int ufshcd_system_resume(struct device *dev); 1277 extern int ufshcd_system_freeze(struct device *dev); 1278 extern int ufshcd_system_thaw(struct device *dev); 1279 extern int ufshcd_system_restore(struct device *dev); 1280 #endif 1281 extern int ufshcd_shutdown(struct ufs_hba *hba); 1282 1283 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, 1284 int agreed_gear, 1285 int adapt_val); 1286 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, 1287 u8 attr_set, u32 mib_val, u8 peer); 1288 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, 1289 u32 *mib_val, u8 peer); 1290 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba, 1291 struct ufs_pa_layer_attr *desired_pwr_mode); 1292 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode); 1293 1294 /* UIC command interfaces for DME primitives */ 1295 #define DME_LOCAL 0 1296 #define DME_PEER 1 1297 #define ATTR_SET_NOR 0 /* NORMAL */ 1298 #define ATTR_SET_ST 1 /* STATIC */ 1299 1300 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, 1301 u32 mib_val) 1302 { 1303 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1304 mib_val, DME_LOCAL); 1305 } 1306 1307 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, 1308 u32 mib_val) 1309 { 1310 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1311 mib_val, DME_LOCAL); 1312 } 1313 1314 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, 1315 u32 mib_val) 1316 { 1317 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1318 mib_val, DME_PEER); 1319 } 1320 1321 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, 1322 u32 mib_val) 1323 { 1324 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1325 mib_val, DME_PEER); 1326 } 1327 1328 static inline int ufshcd_dme_get(struct ufs_hba *hba, 1329 u32 attr_sel, u32 *mib_val) 1330 { 1331 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); 1332 } 1333 1334 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, 1335 u32 attr_sel, u32 *mib_val) 1336 { 1337 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); 1338 } 1339 1340 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) 1341 { 1342 return (pwr_info->pwr_rx == FAST_MODE || 1343 pwr_info->pwr_rx == FASTAUTO_MODE) && 1344 (pwr_info->pwr_tx == FAST_MODE || 1345 pwr_info->pwr_tx == FASTAUTO_MODE); 1346 } 1347 1348 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba) 1349 { 1350 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); 1351 } 1352 1353 void ufshcd_auto_hibern8_enable(struct ufs_hba *hba); 1354 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit); 1355 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, 1356 const struct ufs_dev_quirk *fixups); 1357 #define SD_ASCII_STD true 1358 #define SD_RAW false 1359 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, 1360 u8 **buf, bool ascii); 1361 1362 int ufshcd_hold(struct ufs_hba *hba, bool async); 1363 void ufshcd_release(struct ufs_hba *hba); 1364 1365 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value); 1366 1367 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba); 1368 1369 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg); 1370 1371 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd); 1372 1373 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba, 1374 struct utp_upiu_req *req_upiu, 1375 struct utp_upiu_req *rsp_upiu, 1376 int msgcode, 1377 u8 *desc_buff, int *buff_len, 1378 enum query_opcode desc_op); 1379 int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu, 1380 struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req, 1381 struct ufs_ehs *ehs_rsp, int sg_cnt, 1382 struct scatterlist *sg_list, enum dma_data_direction dir); 1383 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); 1384 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable); 1385 int ufshcd_suspend_prepare(struct device *dev); 1386 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm); 1387 void ufshcd_resume_complete(struct device *dev); 1388 1389 /* Wrapper functions for safely calling variant operations */ 1390 static inline int ufshcd_vops_init(struct ufs_hba *hba) 1391 { 1392 if (hba->vops && hba->vops->init) 1393 return hba->vops->init(hba); 1394 1395 return 0; 1396 } 1397 1398 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba) 1399 { 1400 if (hba->vops && hba->vops->phy_initialization) 1401 return hba->vops->phy_initialization(hba); 1402 1403 return 0; 1404 } 1405 1406 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[]; 1407 1408 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, 1409 const char *prefix); 1410 1411 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask); 1412 int ufshcd_write_ee_control(struct ufs_hba *hba); 1413 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, 1414 const u16 *other_mask, u16 set, u16 clr); 1415 1416 #endif /* End of Header */ 1417