1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Universal Flash Storage Host controller driver 4 * Copyright (C) 2011-2013 Samsung India Software Operations 5 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. 6 * 7 * Authors: 8 * Santosh Yaraganavi <santosh.sy@samsung.com> 9 * Vinayak Holikatti <h.vinayak@samsung.com> 10 */ 11 12 #ifndef _UFSHCD_H 13 #define _UFSHCD_H 14 15 #include <linux/bitfield.h> 16 #include <linux/blk-crypto-profile.h> 17 #include <linux/blk-mq.h> 18 #include <linux/devfreq.h> 19 #include <linux/msi.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/dma-direction.h> 22 #include <scsi/scsi_device.h> 23 #include <ufs/unipro.h> 24 #include <ufs/ufs.h> 25 #include <ufs/ufs_quirks.h> 26 #include <ufs/ufshci.h> 27 28 #define UFSHCD "ufshcd" 29 30 struct ufs_hba; 31 32 enum dev_cmd_type { 33 DEV_CMD_TYPE_NOP = 0x0, 34 DEV_CMD_TYPE_QUERY = 0x1, 35 DEV_CMD_TYPE_RPMB = 0x2, 36 }; 37 38 enum ufs_event_type { 39 /* uic specific errors */ 40 UFS_EVT_PA_ERR = 0, 41 UFS_EVT_DL_ERR, 42 UFS_EVT_NL_ERR, 43 UFS_EVT_TL_ERR, 44 UFS_EVT_DME_ERR, 45 46 /* fatal errors */ 47 UFS_EVT_AUTO_HIBERN8_ERR, 48 UFS_EVT_FATAL_ERR, 49 UFS_EVT_LINK_STARTUP_FAIL, 50 UFS_EVT_RESUME_ERR, 51 UFS_EVT_SUSPEND_ERR, 52 UFS_EVT_WL_SUSP_ERR, 53 UFS_EVT_WL_RES_ERR, 54 55 /* abnormal events */ 56 UFS_EVT_DEV_RESET, 57 UFS_EVT_HOST_RESET, 58 UFS_EVT_ABORT, 59 60 UFS_EVT_CNT, 61 }; 62 63 /** 64 * struct uic_command - UIC command structure 65 * @command: UIC command 66 * @argument1: UIC command argument 1 67 * @argument2: UIC command argument 2 68 * @argument3: UIC command argument 3 69 * @cmd_active: Indicate if UIC command is outstanding 70 * @done: UIC command completion 71 */ 72 struct uic_command { 73 u32 command; 74 u32 argument1; 75 u32 argument2; 76 u32 argument3; 77 int cmd_active; 78 struct completion done; 79 }; 80 81 /* Used to differentiate the power management options */ 82 enum ufs_pm_op { 83 UFS_RUNTIME_PM, 84 UFS_SYSTEM_PM, 85 UFS_SHUTDOWN_PM, 86 }; 87 88 /* Host <-> Device UniPro Link state */ 89 enum uic_link_state { 90 UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ 91 UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ 92 UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ 93 UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */ 94 }; 95 96 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE) 97 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \ 98 UIC_LINK_ACTIVE_STATE) 99 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \ 100 UIC_LINK_HIBERN8_STATE) 101 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \ 102 UIC_LINK_BROKEN_STATE) 103 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE) 104 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \ 105 UIC_LINK_ACTIVE_STATE) 106 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ 107 UIC_LINK_HIBERN8_STATE) 108 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \ 109 UIC_LINK_BROKEN_STATE) 110 111 #define ufshcd_set_ufs_dev_active(h) \ 112 ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) 113 #define ufshcd_set_ufs_dev_sleep(h) \ 114 ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) 115 #define ufshcd_set_ufs_dev_poweroff(h) \ 116 ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) 117 #define ufshcd_set_ufs_dev_deepsleep(h) \ 118 ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE) 119 #define ufshcd_is_ufs_dev_active(h) \ 120 ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) 121 #define ufshcd_is_ufs_dev_sleep(h) \ 122 ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) 123 #define ufshcd_is_ufs_dev_poweroff(h) \ 124 ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) 125 #define ufshcd_is_ufs_dev_deepsleep(h) \ 126 ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE) 127 128 /* 129 * UFS Power management levels. 130 * Each level is in increasing order of power savings, except DeepSleep 131 * which is lower than PowerDown with power on but not PowerDown with 132 * power off. 133 */ 134 enum ufs_pm_level { 135 UFS_PM_LVL_0, 136 UFS_PM_LVL_1, 137 UFS_PM_LVL_2, 138 UFS_PM_LVL_3, 139 UFS_PM_LVL_4, 140 UFS_PM_LVL_5, 141 UFS_PM_LVL_6, 142 UFS_PM_LVL_MAX 143 }; 144 145 struct ufs_pm_lvl_states { 146 enum ufs_dev_pwr_mode dev_state; 147 enum uic_link_state link_state; 148 }; 149 150 /** 151 * struct ufshcd_lrb - local reference block 152 * @utr_descriptor_ptr: UTRD address of the command 153 * @ucd_req_ptr: UCD address of the command 154 * @ucd_rsp_ptr: Response UPIU address for this command 155 * @ucd_prdt_ptr: PRDT address of the command 156 * @utrd_dma_addr: UTRD dma address for debug 157 * @ucd_prdt_dma_addr: PRDT dma address for debug 158 * @ucd_rsp_dma_addr: UPIU response dma address for debug 159 * @ucd_req_dma_addr: UPIU request dma address for debug 160 * @cmd: pointer to SCSI command 161 * @scsi_status: SCSI status of the command 162 * @command_type: SCSI, UFS, Query. 163 * @task_tag: Task tag of the command 164 * @lun: LUN of the command 165 * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) 166 * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC) 167 * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock) 168 * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC) 169 * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock) 170 * @crypto_key_slot: the key slot to use for inline crypto (-1 if none) 171 * @data_unit_num: the data unit number for the first block for inline crypto 172 * @req_abort_skip: skip request abort task flag 173 */ 174 struct ufshcd_lrb { 175 struct utp_transfer_req_desc *utr_descriptor_ptr; 176 struct utp_upiu_req *ucd_req_ptr; 177 struct utp_upiu_rsp *ucd_rsp_ptr; 178 struct ufshcd_sg_entry *ucd_prdt_ptr; 179 180 dma_addr_t utrd_dma_addr; 181 dma_addr_t ucd_req_dma_addr; 182 dma_addr_t ucd_rsp_dma_addr; 183 dma_addr_t ucd_prdt_dma_addr; 184 185 struct scsi_cmnd *cmd; 186 int scsi_status; 187 188 int command_type; 189 int task_tag; 190 u8 lun; /* UPIU LUN id field is only 8-bit wide */ 191 bool intr_cmd; 192 ktime_t issue_time_stamp; 193 u64 issue_time_stamp_local_clock; 194 ktime_t compl_time_stamp; 195 u64 compl_time_stamp_local_clock; 196 #ifdef CONFIG_SCSI_UFS_CRYPTO 197 int crypto_key_slot; 198 u64 data_unit_num; 199 #endif 200 201 bool req_abort_skip; 202 }; 203 204 /** 205 * struct ufs_query - holds relevant data structures for query request 206 * @request: request upiu and function 207 * @descriptor: buffer for sending/receiving descriptor 208 * @response: response upiu and response 209 */ 210 struct ufs_query { 211 struct ufs_query_req request; 212 u8 *descriptor; 213 struct ufs_query_res response; 214 }; 215 216 /** 217 * struct ufs_dev_cmd - all assosiated fields with device management commands 218 * @type: device management command type - Query, NOP OUT 219 * @lock: lock to allow one command at a time 220 * @complete: internal commands completion 221 * @query: Device management query information 222 */ 223 struct ufs_dev_cmd { 224 enum dev_cmd_type type; 225 struct mutex lock; 226 struct completion *complete; 227 struct ufs_query query; 228 struct cq_entry *cqe; 229 }; 230 231 /** 232 * struct ufs_clk_info - UFS clock related info 233 * @list: list headed by hba->clk_list_head 234 * @clk: clock node 235 * @name: clock name 236 * @max_freq: maximum frequency supported by the clock 237 * @min_freq: min frequency that can be used for clock scaling 238 * @curr_freq: indicates the current frequency that it is set to 239 * @keep_link_active: indicates that the clk should not be disabled if 240 * link is active 241 * @enabled: variable to check against multiple enable/disable 242 */ 243 struct ufs_clk_info { 244 struct list_head list; 245 struct clk *clk; 246 const char *name; 247 u32 max_freq; 248 u32 min_freq; 249 u32 curr_freq; 250 bool keep_link_active; 251 bool enabled; 252 }; 253 254 enum ufs_notify_change_status { 255 PRE_CHANGE, 256 POST_CHANGE, 257 }; 258 259 struct ufs_pa_layer_attr { 260 u32 gear_rx; 261 u32 gear_tx; 262 u32 lane_rx; 263 u32 lane_tx; 264 u32 pwr_rx; 265 u32 pwr_tx; 266 u32 hs_rate; 267 }; 268 269 struct ufs_pwr_mode_info { 270 bool is_valid; 271 struct ufs_pa_layer_attr info; 272 }; 273 274 /** 275 * struct ufs_hba_variant_ops - variant specific callbacks 276 * @name: variant name 277 * @init: called when the driver is initialized 278 * @exit: called to cleanup everything done in init 279 * @get_ufs_hci_version: called to get UFS HCI version 280 * @clk_scale_notify: notifies that clks are scaled up/down 281 * @setup_clocks: called before touching any of the controller registers 282 * @hce_enable_notify: called before and after HCE enable bit is set to allow 283 * variant specific Uni-Pro initialization. 284 * @link_startup_notify: called before and after Link startup is carried out 285 * to allow variant specific Uni-Pro initialization. 286 * @pwr_change_notify: called before and after a power mode change 287 * is carried out to allow vendor spesific capabilities 288 * to be set. 289 * @setup_xfer_req: called before any transfer request is issued 290 * to set some things 291 * @setup_task_mgmt: called before any task management request is issued 292 * to set some things 293 * @hibern8_notify: called around hibern8 enter/exit 294 * @apply_dev_quirks: called to apply device specific quirks 295 * @fixup_dev_quirks: called to modify device specific quirks 296 * @suspend: called during host controller PM callback 297 * @resume: called during host controller PM callback 298 * @dbg_register_dump: used to dump controller debug information 299 * @phy_initialization: used to initialize phys 300 * @device_reset: called to issue a reset pulse on the UFS device 301 * @config_scaling_param: called to configure clock scaling parameters 302 * @program_key: program or evict an inline encryption key 303 * @event_notify: called to notify important events 304 * @reinit_notify: called to notify reinit of UFSHCD during max gear switch 305 * @mcq_config_resource: called to configure MCQ platform resources 306 * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode 307 * @op_runtime_config: called to config Operation and runtime regs Pointers 308 * @get_outstanding_cqs: called to get outstanding completion queues 309 * @config_esi: called to config Event Specific Interrupt 310 */ 311 struct ufs_hba_variant_ops { 312 const char *name; 313 int (*init)(struct ufs_hba *); 314 void (*exit)(struct ufs_hba *); 315 u32 (*get_ufs_hci_version)(struct ufs_hba *); 316 int (*clk_scale_notify)(struct ufs_hba *, bool, 317 enum ufs_notify_change_status); 318 int (*setup_clocks)(struct ufs_hba *, bool, 319 enum ufs_notify_change_status); 320 int (*hce_enable_notify)(struct ufs_hba *, 321 enum ufs_notify_change_status); 322 int (*link_startup_notify)(struct ufs_hba *, 323 enum ufs_notify_change_status); 324 int (*pwr_change_notify)(struct ufs_hba *, 325 enum ufs_notify_change_status status, 326 struct ufs_pa_layer_attr *, 327 struct ufs_pa_layer_attr *); 328 void (*setup_xfer_req)(struct ufs_hba *hba, int tag, 329 bool is_scsi_cmd); 330 void (*setup_task_mgmt)(struct ufs_hba *, int, u8); 331 void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme, 332 enum ufs_notify_change_status); 333 int (*apply_dev_quirks)(struct ufs_hba *hba); 334 void (*fixup_dev_quirks)(struct ufs_hba *hba); 335 int (*suspend)(struct ufs_hba *, enum ufs_pm_op, 336 enum ufs_notify_change_status); 337 int (*resume)(struct ufs_hba *, enum ufs_pm_op); 338 void (*dbg_register_dump)(struct ufs_hba *hba); 339 int (*phy_initialization)(struct ufs_hba *); 340 int (*device_reset)(struct ufs_hba *hba); 341 void (*config_scaling_param)(struct ufs_hba *hba, 342 struct devfreq_dev_profile *profile, 343 struct devfreq_simple_ondemand_data *data); 344 int (*program_key)(struct ufs_hba *hba, 345 const union ufs_crypto_cfg_entry *cfg, int slot); 346 void (*event_notify)(struct ufs_hba *hba, 347 enum ufs_event_type evt, void *data); 348 void (*reinit_notify)(struct ufs_hba *); 349 int (*mcq_config_resource)(struct ufs_hba *hba); 350 int (*get_hba_mac)(struct ufs_hba *hba); 351 int (*op_runtime_config)(struct ufs_hba *hba); 352 int (*get_outstanding_cqs)(struct ufs_hba *hba, 353 unsigned long *ocqs); 354 int (*config_esi)(struct ufs_hba *hba); 355 }; 356 357 /* clock gating state */ 358 enum clk_gating_state { 359 CLKS_OFF, 360 CLKS_ON, 361 REQ_CLKS_OFF, 362 REQ_CLKS_ON, 363 }; 364 365 /** 366 * struct ufs_clk_gating - UFS clock gating related info 367 * @gate_work: worker to turn off clocks after some delay as specified in 368 * delay_ms 369 * @ungate_work: worker to turn on clocks that will be used in case of 370 * interrupt context 371 * @state: the current clocks state 372 * @delay_ms: gating delay in ms 373 * @is_suspended: clk gating is suspended when set to 1 which can be used 374 * during suspend/resume 375 * @delay_attr: sysfs attribute to control delay_attr 376 * @enable_attr: sysfs attribute to enable/disable clock gating 377 * @is_enabled: Indicates the current status of clock gating 378 * @is_initialized: Indicates whether clock gating is initialized or not 379 * @active_reqs: number of requests that are pending and should be waited for 380 * completion before gating clocks. 381 * @clk_gating_workq: workqueue for clock gating work. 382 */ 383 struct ufs_clk_gating { 384 struct delayed_work gate_work; 385 struct work_struct ungate_work; 386 enum clk_gating_state state; 387 unsigned long delay_ms; 388 bool is_suspended; 389 struct device_attribute delay_attr; 390 struct device_attribute enable_attr; 391 bool is_enabled; 392 bool is_initialized; 393 int active_reqs; 394 struct workqueue_struct *clk_gating_workq; 395 }; 396 397 struct ufs_saved_pwr_info { 398 struct ufs_pa_layer_attr info; 399 bool is_valid; 400 }; 401 402 /** 403 * struct ufs_clk_scaling - UFS clock scaling related data 404 * @active_reqs: number of requests that are pending. If this is zero when 405 * devfreq ->target() function is called then schedule "suspend_work" to 406 * suspend devfreq. 407 * @tot_busy_t: Total busy time in current polling window 408 * @window_start_t: Start time (in jiffies) of the current polling window 409 * @busy_start_t: Start time of current busy period 410 * @enable_attr: sysfs attribute to enable/disable clock scaling 411 * @saved_pwr_info: UFS power mode may also be changed during scaling and this 412 * one keeps track of previous power mode. 413 * @workq: workqueue to schedule devfreq suspend/resume work 414 * @suspend_work: worker to suspend devfreq 415 * @resume_work: worker to resume devfreq 416 * @min_gear: lowest HS gear to scale down to 417 * @is_enabled: tracks if scaling is currently enabled or not, controlled by 418 * clkscale_enable sysfs node 419 * @is_allowed: tracks if scaling is currently allowed or not, used to block 420 * clock scaling which is not invoked from devfreq governor 421 * @is_initialized: Indicates whether clock scaling is initialized or not 422 * @is_busy_started: tracks if busy period has started or not 423 * @is_suspended: tracks if devfreq is suspended or not 424 */ 425 struct ufs_clk_scaling { 426 int active_reqs; 427 unsigned long tot_busy_t; 428 ktime_t window_start_t; 429 ktime_t busy_start_t; 430 struct device_attribute enable_attr; 431 struct ufs_saved_pwr_info saved_pwr_info; 432 struct workqueue_struct *workq; 433 struct work_struct suspend_work; 434 struct work_struct resume_work; 435 u32 min_gear; 436 bool is_enabled; 437 bool is_allowed; 438 bool is_initialized; 439 bool is_busy_started; 440 bool is_suspended; 441 }; 442 443 #define UFS_EVENT_HIST_LENGTH 8 444 /** 445 * struct ufs_event_hist - keeps history of errors 446 * @pos: index to indicate cyclic buffer position 447 * @val: cyclic buffer for registers value 448 * @tstamp: cyclic buffer for time stamp 449 * @cnt: error counter 450 */ 451 struct ufs_event_hist { 452 int pos; 453 u32 val[UFS_EVENT_HIST_LENGTH]; 454 u64 tstamp[UFS_EVENT_HIST_LENGTH]; 455 unsigned long long cnt; 456 }; 457 458 /** 459 * struct ufs_stats - keeps usage/err statistics 460 * @last_intr_status: record the last interrupt status. 461 * @last_intr_ts: record the last interrupt timestamp. 462 * @hibern8_exit_cnt: Counter to keep track of number of exits, 463 * reset this after link-startup. 464 * @last_hibern8_exit_tstamp: Set time after the hibern8 exit. 465 * Clear after the first successful command completion. 466 * @event: array with event history. 467 */ 468 struct ufs_stats { 469 u32 last_intr_status; 470 u64 last_intr_ts; 471 472 u32 hibern8_exit_cnt; 473 u64 last_hibern8_exit_tstamp; 474 struct ufs_event_hist event[UFS_EVT_CNT]; 475 }; 476 477 /** 478 * enum ufshcd_state - UFS host controller state 479 * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command 480 * processing. 481 * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process 482 * SCSI commands. 483 * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. 484 * SCSI commands may be submitted to the controller. 485 * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail 486 * newly submitted SCSI commands with error code DID_BAD_TARGET. 487 * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery 488 * failed. Fail all SCSI commands with error code DID_ERROR. 489 */ 490 enum ufshcd_state { 491 UFSHCD_STATE_RESET, 492 UFSHCD_STATE_OPERATIONAL, 493 UFSHCD_STATE_EH_SCHEDULED_NON_FATAL, 494 UFSHCD_STATE_EH_SCHEDULED_FATAL, 495 UFSHCD_STATE_ERROR, 496 }; 497 498 enum ufshcd_quirks { 499 /* Interrupt aggregation support is broken */ 500 UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, 501 502 /* 503 * delay before each dme command is required as the unipro 504 * layer has shown instabilities 505 */ 506 UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, 507 508 /* 509 * If UFS host controller is having issue in processing LCC (Line 510 * Control Command) coming from device then enable this quirk. 511 * When this quirk is enabled, host controller driver should disable 512 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE 513 * attribute of device to 0). 514 */ 515 UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, 516 517 /* 518 * The attribute PA_RXHSUNTERMCAP specifies whether or not the 519 * inbound Link supports unterminated line in HS mode. Setting this 520 * attribute to 1 fixes moving to HS gear. 521 */ 522 UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, 523 524 /* 525 * This quirk needs to be enabled if the host controller only allows 526 * accessing the peer dme attributes in AUTO mode (FAST AUTO or 527 * SLOW AUTO). 528 */ 529 UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, 530 531 /* 532 * This quirk needs to be enabled if the host controller doesn't 533 * advertise the correct version in UFS_VER register. If this quirk 534 * is enabled, standard UFS host driver will call the vendor specific 535 * ops (get_ufs_hci_version) to get the correct version. 536 */ 537 UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, 538 539 /* 540 * Clear handling for transfer/task request list is just opposite. 541 */ 542 UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6, 543 544 /* 545 * This quirk needs to be enabled if host controller doesn't allow 546 * that the interrupt aggregation timer and counter are reset by s/w. 547 */ 548 UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, 549 550 /* 551 * This quirks needs to be enabled if host controller cannot be 552 * enabled via HCE register. 553 */ 554 UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, 555 556 /* 557 * This quirk needs to be enabled if the host controller regards 558 * resolution of the values of PRDTO and PRDTL in UTRD as byte. 559 */ 560 UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9, 561 562 /* 563 * This quirk needs to be enabled if the host controller reports 564 * OCS FATAL ERROR with device error through sense data 565 */ 566 UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10, 567 568 /* 569 * This quirk needs to be enabled if the host controller has 570 * auto-hibernate capability but it doesn't work. 571 */ 572 UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11, 573 574 /* 575 * This quirk needs to disable manual flush for write booster 576 */ 577 UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, 578 579 /* 580 * This quirk needs to disable unipro timeout values 581 * before power mode change 582 */ 583 UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, 584 585 /* 586 * Align DMA SG entries on a 4 KiB boundary. 587 */ 588 UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14, 589 590 /* 591 * This quirk needs to be enabled if the host controller does not 592 * support UIC command 593 */ 594 UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15, 595 596 /* 597 * This quirk needs to be enabled if the host controller cannot 598 * support physical host configuration. 599 */ 600 UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16, 601 602 /* 603 * This quirk needs to be enabled if the host controller has 604 * 64-bit addressing supported capability but it doesn't work. 605 */ 606 UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS = 1 << 17, 607 608 /* 609 * This quirk needs to be enabled if the host controller has 610 * auto-hibernate capability but it's FASTAUTO only. 611 */ 612 UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18, 613 614 /* 615 * This quirk needs to be enabled if the host controller needs 616 * to reinit the device after switching to maximum gear. 617 */ 618 UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19, 619 }; 620 621 enum ufshcd_caps { 622 /* Allow dynamic clk gating */ 623 UFSHCD_CAP_CLK_GATING = 1 << 0, 624 625 /* Allow hiberb8 with clk gating */ 626 UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1, 627 628 /* Allow dynamic clk scaling */ 629 UFSHCD_CAP_CLK_SCALING = 1 << 2, 630 631 /* Allow auto bkops to enabled during runtime suspend */ 632 UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3, 633 634 /* 635 * This capability allows host controller driver to use the UFS HCI's 636 * interrupt aggregation capability. 637 * CAUTION: Enabling this might reduce overall UFS throughput. 638 */ 639 UFSHCD_CAP_INTR_AGGR = 1 << 4, 640 641 /* 642 * This capability allows the device auto-bkops to be always enabled 643 * except during suspend (both runtime and suspend). 644 * Enabling this capability means that device will always be allowed 645 * to do background operation when it's active but it might degrade 646 * the performance of ongoing read/write operations. 647 */ 648 UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5, 649 650 /* 651 * This capability allows host controller driver to automatically 652 * enable runtime power management by itself instead of waiting 653 * for userspace to control the power management. 654 */ 655 UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6, 656 657 /* 658 * This capability allows the host controller driver to turn-on 659 * WriteBooster, if the underlying device supports it and is 660 * provisioned to be used. This would increase the write performance. 661 */ 662 UFSHCD_CAP_WB_EN = 1 << 7, 663 664 /* 665 * This capability allows the host controller driver to use the 666 * inline crypto engine, if it is present 667 */ 668 UFSHCD_CAP_CRYPTO = 1 << 8, 669 670 /* 671 * This capability allows the controller regulators to be put into 672 * lpm mode aggressively during clock gating. 673 * This would increase power savings. 674 */ 675 UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9, 676 677 /* 678 * This capability allows the host controller driver to use DeepSleep, 679 * if it is supported by the UFS device. The host controller driver must 680 * support device hardware reset via the hba->device_reset() callback, 681 * in order to exit DeepSleep state. 682 */ 683 UFSHCD_CAP_DEEPSLEEP = 1 << 10, 684 685 /* 686 * This capability allows the host controller driver to use temperature 687 * notification if it is supported by the UFS device. 688 */ 689 UFSHCD_CAP_TEMP_NOTIF = 1 << 11, 690 691 /* 692 * Enable WriteBooster when scaling up the clock and disable 693 * WriteBooster when scaling the clock down. 694 */ 695 UFSHCD_CAP_WB_WITH_CLK_SCALING = 1 << 12, 696 }; 697 698 struct ufs_hba_variant_params { 699 struct devfreq_dev_profile devfreq_profile; 700 struct devfreq_simple_ondemand_data ondemand_data; 701 u16 hba_enable_delay_us; 702 u32 wb_flush_threshold; 703 }; 704 705 #ifdef CONFIG_SCSI_UFS_HPB 706 /** 707 * struct ufshpb_dev_info - UFSHPB device related info 708 * @num_lu: the number of user logical unit to check whether all lu finished 709 * initialization 710 * @rgn_size: device reported HPB region size 711 * @srgn_size: device reported HPB sub-region size 712 * @slave_conf_cnt: counter to check all lu finished initialization 713 * @hpb_disabled: flag to check if HPB is disabled 714 * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value 715 * @is_legacy: flag to check HPB 1.0 716 * @control_mode: either host or device 717 */ 718 struct ufshpb_dev_info { 719 int num_lu; 720 int rgn_size; 721 int srgn_size; 722 atomic_t slave_conf_cnt; 723 bool hpb_disabled; 724 u8 max_hpb_single_cmd; 725 bool is_legacy; 726 u8 control_mode; 727 }; 728 #endif 729 730 struct ufs_hba_monitor { 731 unsigned long chunk_size; 732 733 unsigned long nr_sec_rw[2]; 734 ktime_t total_busy[2]; 735 736 unsigned long nr_req[2]; 737 /* latencies*/ 738 ktime_t lat_sum[2]; 739 ktime_t lat_max[2]; 740 ktime_t lat_min[2]; 741 742 u32 nr_queued[2]; 743 ktime_t busy_start_ts[2]; 744 745 ktime_t enabled_ts; 746 bool enabled; 747 }; 748 749 /** 750 * struct ufshcd_res_info_t - MCQ related resource regions 751 * 752 * @name: resource name 753 * @resource: pointer to resource region 754 * @base: register base address 755 */ 756 struct ufshcd_res_info { 757 const char *name; 758 struct resource *resource; 759 void __iomem *base; 760 }; 761 762 enum ufshcd_res { 763 RES_UFS, 764 RES_MCQ, 765 RES_MCQ_SQD, 766 RES_MCQ_SQIS, 767 RES_MCQ_CQD, 768 RES_MCQ_CQIS, 769 RES_MCQ_VS, 770 RES_MAX, 771 }; 772 773 /** 774 * struct ufshcd_mcq_opr_info_t - Operation and Runtime registers 775 * 776 * @offset: Doorbell Address Offset 777 * @stride: Steps proportional to queue [0...31] 778 * @base: base address 779 */ 780 struct ufshcd_mcq_opr_info_t { 781 unsigned long offset; 782 unsigned long stride; 783 void __iomem *base; 784 }; 785 786 enum ufshcd_mcq_opr { 787 OPR_SQD, 788 OPR_SQIS, 789 OPR_CQD, 790 OPR_CQIS, 791 OPR_MAX, 792 }; 793 794 /** 795 * struct ufs_hba - per adapter private structure 796 * @mmio_base: UFSHCI base register address 797 * @ucdl_base_addr: UFS Command Descriptor base address 798 * @utrdl_base_addr: UTP Transfer Request Descriptor base address 799 * @utmrdl_base_addr: UTP Task Management Descriptor base address 800 * @ucdl_dma_addr: UFS Command Descriptor DMA address 801 * @utrdl_dma_addr: UTRDL DMA address 802 * @utmrdl_dma_addr: UTMRDL DMA address 803 * @host: Scsi_Host instance of the driver 804 * @dev: device handle 805 * @ufs_device_wlun: WLUN that controls the entire UFS device. 806 * @hwmon_device: device instance registered with the hwmon core. 807 * @curr_dev_pwr_mode: active UFS device power mode. 808 * @uic_link_state: active state of the link to the UFS device. 809 * @rpm_lvl: desired UFS power management level during runtime PM. 810 * @spm_lvl: desired UFS power management level during system PM. 811 * @pm_op_in_progress: whether or not a PM operation is in progress. 812 * @ahit: value of Auto-Hibernate Idle Timer register. 813 * @lrb: local reference block 814 * @outstanding_tasks: Bits representing outstanding task requests 815 * @outstanding_lock: Protects @outstanding_reqs. 816 * @outstanding_reqs: Bits representing outstanding transfer requests 817 * @capabilities: UFS Controller Capabilities 818 * @mcq_capabilities: UFS Multi Circular Queue capabilities 819 * @nutrs: Transfer Request Queue depth supported by controller 820 * @nutmrs: Task Management Queue depth supported by controller 821 * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock. 822 * @ufs_version: UFS Version to which controller complies 823 * @vops: pointer to variant specific operations 824 * @vps: pointer to variant specific parameters 825 * @priv: pointer to variant specific private data 826 * @sg_entry_size: size of struct ufshcd_sg_entry (may include variant fields) 827 * @irq: Irq number of the controller 828 * @is_irq_enabled: whether or not the UFS controller interrupt is enabled. 829 * @dev_ref_clk_freq: reference clock frequency 830 * @quirks: bitmask with information about deviations from the UFSHCI standard. 831 * @dev_quirks: bitmask with information about deviations from the UFS standard. 832 * @tmf_tag_set: TMF tag set. 833 * @tmf_queue: Used to allocate TMF tags. 834 * @tmf_rqs: array with pointers to TMF requests while these are in progress. 835 * @active_uic_cmd: handle of active UIC command 836 * @uic_cmd_mutex: mutex for UIC command 837 * @uic_async_done: completion used during UIC processing 838 * @ufshcd_state: UFSHCD state 839 * @eh_flags: Error handling flags 840 * @intr_mask: Interrupt Mask Bits 841 * @ee_ctrl_mask: Exception event control mask 842 * @ee_drv_mask: Exception event mask for driver 843 * @ee_usr_mask: Exception event mask for user (set via debugfs) 844 * @ee_ctrl_mutex: Used to serialize exception event information. 845 * @is_powered: flag to check if HBA is powered 846 * @shutting_down: flag to check if shutdown has been invoked 847 * @host_sem: semaphore used to serialize concurrent contexts 848 * @eh_wq: Workqueue that eh_work works on 849 * @eh_work: Worker to handle UFS errors that require s/w attention 850 * @eeh_work: Worker to handle exception events 851 * @errors: HBA errors 852 * @uic_error: UFS interconnect layer error status 853 * @saved_err: sticky error mask 854 * @saved_uic_err: sticky UIC error mask 855 * @ufs_stats: various error counters 856 * @force_reset: flag to force eh_work perform a full reset 857 * @force_pmc: flag to force a power mode change 858 * @silence_err_logs: flag to silence error logs 859 * @dev_cmd: ufs device management command information 860 * @last_dme_cmd_tstamp: time stamp of the last completed DME command 861 * @nop_out_timeout: NOP OUT timeout value 862 * @dev_info: information about the UFS device 863 * @auto_bkops_enabled: to track whether bkops is enabled in device 864 * @vreg_info: UFS device voltage regulator information 865 * @clk_list_head: UFS host controller clocks list node head 866 * @req_abort_count: number of times ufshcd_abort() has been called 867 * @lanes_per_direction: number of lanes per data direction between the UFS 868 * controller and the UFS device. 869 * @pwr_info: holds current power mode 870 * @max_pwr_info: keeps the device max valid pwm 871 * @clk_gating: information related to clock gating 872 * @caps: bitmask with information about UFS controller capabilities 873 * @devfreq: frequency scaling information owned by the devfreq core 874 * @clk_scaling: frequency scaling information owned by the UFS driver 875 * @system_suspending: system suspend has been started and system resume has 876 * not yet finished. 877 * @is_sys_suspended: UFS device has been suspended because of system suspend 878 * @urgent_bkops_lvl: keeps track of urgent bkops level for device 879 * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for 880 * device is known or not. 881 * @wb_mutex: used to serialize devfreq and sysfs write booster toggling 882 * @clk_scaling_lock: used to serialize device commands and clock scaling 883 * @desc_size: descriptor sizes reported by device 884 * @scsi_block_reqs_cnt: reference counting for scsi block requests 885 * @bsg_dev: struct device associated with the BSG queue 886 * @bsg_queue: BSG queue associated with the UFS controller 887 * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power 888 * management) after the UFS device has finished a WriteBooster buffer 889 * flush or auto BKOP. 890 * @ufshpb_dev: information related to HPB (Host Performance Booster). 891 * @monitor: statistics about UFS commands 892 * @crypto_capabilities: Content of crypto capabilities register (0x100) 893 * @crypto_cap_array: Array of crypto capabilities 894 * @crypto_cfg_register: Start of the crypto cfg array 895 * @crypto_profile: the crypto profile of this hba (if applicable) 896 * @debugfs_root: UFS controller debugfs root directory 897 * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay 898 * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore 899 * ee_ctrl_mask 900 * @luns_avail: number of regular and well known LUNs supported by the UFS 901 * device 902 * @nr_hw_queues: number of hardware queues configured 903 * @nr_queues: number of Queues of different queue types 904 * @complete_put: whether or not to call ufshcd_rpm_put() from inside 905 * ufshcd_resume_complete() 906 * @ext_iid_sup: is EXT_IID is supported by UFSHC 907 * @mcq_sup: is mcq supported by UFSHC 908 * @mcq_enabled: is mcq ready to accept requests 909 * @res: array of resource info of MCQ registers 910 * @mcq_base: Multi circular queue registers base address 911 * @uhq: array of supported hardware queues 912 * @dev_cmd_queue: Queue for issuing device management commands 913 */ 914 struct ufs_hba { 915 void __iomem *mmio_base; 916 917 /* Virtual memory reference */ 918 struct utp_transfer_cmd_desc *ucdl_base_addr; 919 struct utp_transfer_req_desc *utrdl_base_addr; 920 struct utp_task_req_desc *utmrdl_base_addr; 921 922 /* DMA memory reference */ 923 dma_addr_t ucdl_dma_addr; 924 dma_addr_t utrdl_dma_addr; 925 dma_addr_t utmrdl_dma_addr; 926 927 struct Scsi_Host *host; 928 struct device *dev; 929 struct scsi_device *ufs_device_wlun; 930 931 #ifdef CONFIG_SCSI_UFS_HWMON 932 struct device *hwmon_device; 933 #endif 934 935 enum ufs_dev_pwr_mode curr_dev_pwr_mode; 936 enum uic_link_state uic_link_state; 937 /* Desired UFS power management level during runtime PM */ 938 enum ufs_pm_level rpm_lvl; 939 /* Desired UFS power management level during system PM */ 940 enum ufs_pm_level spm_lvl; 941 int pm_op_in_progress; 942 943 /* Auto-Hibernate Idle Timer register value */ 944 u32 ahit; 945 946 struct ufshcd_lrb *lrb; 947 948 unsigned long outstanding_tasks; 949 spinlock_t outstanding_lock; 950 unsigned long outstanding_reqs; 951 952 u32 capabilities; 953 int nutrs; 954 u32 mcq_capabilities; 955 int nutmrs; 956 u32 reserved_slot; 957 u32 ufs_version; 958 const struct ufs_hba_variant_ops *vops; 959 struct ufs_hba_variant_params *vps; 960 void *priv; 961 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 962 size_t sg_entry_size; 963 #endif 964 unsigned int irq; 965 bool is_irq_enabled; 966 enum ufs_ref_clk_freq dev_ref_clk_freq; 967 968 unsigned int quirks; /* Deviations from standard UFSHCI spec. */ 969 970 /* Device deviations from standard UFS device spec. */ 971 unsigned int dev_quirks; 972 973 struct blk_mq_tag_set tmf_tag_set; 974 struct request_queue *tmf_queue; 975 struct request **tmf_rqs; 976 977 struct uic_command *active_uic_cmd; 978 struct mutex uic_cmd_mutex; 979 struct completion *uic_async_done; 980 981 enum ufshcd_state ufshcd_state; 982 u32 eh_flags; 983 u32 intr_mask; 984 u16 ee_ctrl_mask; 985 u16 ee_drv_mask; 986 u16 ee_usr_mask; 987 struct mutex ee_ctrl_mutex; 988 bool is_powered; 989 bool shutting_down; 990 struct semaphore host_sem; 991 992 /* Work Queues */ 993 struct workqueue_struct *eh_wq; 994 struct work_struct eh_work; 995 struct work_struct eeh_work; 996 997 /* HBA Errors */ 998 u32 errors; 999 u32 uic_error; 1000 u32 saved_err; 1001 u32 saved_uic_err; 1002 struct ufs_stats ufs_stats; 1003 bool force_reset; 1004 bool force_pmc; 1005 bool silence_err_logs; 1006 1007 /* Device management request data */ 1008 struct ufs_dev_cmd dev_cmd; 1009 ktime_t last_dme_cmd_tstamp; 1010 int nop_out_timeout; 1011 1012 /* Keeps information of the UFS device connected to this host */ 1013 struct ufs_dev_info dev_info; 1014 bool auto_bkops_enabled; 1015 struct ufs_vreg_info vreg_info; 1016 struct list_head clk_list_head; 1017 1018 /* Number of requests aborts */ 1019 int req_abort_count; 1020 1021 /* Number of lanes available (1 or 2) for Rx/Tx */ 1022 u32 lanes_per_direction; 1023 struct ufs_pa_layer_attr pwr_info; 1024 struct ufs_pwr_mode_info max_pwr_info; 1025 1026 struct ufs_clk_gating clk_gating; 1027 /* Control to enable/disable host capabilities */ 1028 u32 caps; 1029 1030 struct devfreq *devfreq; 1031 struct ufs_clk_scaling clk_scaling; 1032 bool system_suspending; 1033 bool is_sys_suspended; 1034 1035 enum bkops_status urgent_bkops_lvl; 1036 bool is_urgent_bkops_lvl_checked; 1037 1038 struct mutex wb_mutex; 1039 struct rw_semaphore clk_scaling_lock; 1040 atomic_t scsi_block_reqs_cnt; 1041 1042 struct device bsg_dev; 1043 struct request_queue *bsg_queue; 1044 struct delayed_work rpm_dev_flush_recheck_work; 1045 1046 #ifdef CONFIG_SCSI_UFS_HPB 1047 struct ufshpb_dev_info ufshpb_dev; 1048 #endif 1049 1050 struct ufs_hba_monitor monitor; 1051 1052 #ifdef CONFIG_SCSI_UFS_CRYPTO 1053 union ufs_crypto_capabilities crypto_capabilities; 1054 union ufs_crypto_cap_entry *crypto_cap_array; 1055 u32 crypto_cfg_register; 1056 struct blk_crypto_profile crypto_profile; 1057 #endif 1058 #ifdef CONFIG_DEBUG_FS 1059 struct dentry *debugfs_root; 1060 struct delayed_work debugfs_ee_work; 1061 u32 debugfs_ee_rate_limit_ms; 1062 #endif 1063 u32 luns_avail; 1064 unsigned int nr_hw_queues; 1065 unsigned int nr_queues[HCTX_MAX_TYPES]; 1066 bool complete_put; 1067 bool ext_iid_sup; 1068 bool scsi_host_added; 1069 bool mcq_sup; 1070 bool mcq_enabled; 1071 struct ufshcd_res_info res[RES_MAX]; 1072 void __iomem *mcq_base; 1073 struct ufs_hw_queue *uhq; 1074 struct ufs_hw_queue *dev_cmd_queue; 1075 struct ufshcd_mcq_opr_info_t mcq_opr[OPR_MAX]; 1076 }; 1077 1078 /** 1079 * struct ufs_hw_queue - per hardware queue structure 1080 * @mcq_sq_head: base address of submission queue head pointer 1081 * @mcq_sq_tail: base address of submission queue tail pointer 1082 * @mcq_cq_head: base address of completion queue head pointer 1083 * @mcq_cq_tail: base address of completion queue tail pointer 1084 * @sqe_base_addr: submission queue entry base address 1085 * @sqe_dma_addr: submission queue dma address 1086 * @cqe_base_addr: completion queue base address 1087 * @cqe_dma_addr: completion queue dma address 1088 * @max_entries: max number of slots in this hardware queue 1089 * @id: hardware queue ID 1090 * @sq_tp_slot: current slot to which SQ tail pointer is pointing 1091 * @sq_lock: serialize submission queue access 1092 * @cq_tail_slot: current slot to which CQ tail pointer is pointing 1093 * @cq_head_slot: current slot to which CQ head pointer is pointing 1094 * @cq_lock: Synchronize between multiple polling instances 1095 */ 1096 struct ufs_hw_queue { 1097 void __iomem *mcq_sq_head; 1098 void __iomem *mcq_sq_tail; 1099 void __iomem *mcq_cq_head; 1100 void __iomem *mcq_cq_tail; 1101 1102 void *sqe_base_addr; 1103 dma_addr_t sqe_dma_addr; 1104 struct cq_entry *cqe_base_addr; 1105 dma_addr_t cqe_dma_addr; 1106 u32 max_entries; 1107 u32 id; 1108 u32 sq_tail_slot; 1109 spinlock_t sq_lock; 1110 u32 cq_tail_slot; 1111 u32 cq_head_slot; 1112 spinlock_t cq_lock; 1113 }; 1114 1115 static inline bool is_mcq_enabled(struct ufs_hba *hba) 1116 { 1117 return hba->mcq_enabled; 1118 } 1119 1120 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 1121 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1122 { 1123 return hba->sg_entry_size; 1124 } 1125 1126 static inline void ufshcd_set_sg_entry_size(struct ufs_hba *hba, size_t sg_entry_size) 1127 { 1128 WARN_ON_ONCE(sg_entry_size < sizeof(struct ufshcd_sg_entry)); 1129 hba->sg_entry_size = sg_entry_size; 1130 } 1131 #else 1132 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1133 { 1134 return sizeof(struct ufshcd_sg_entry); 1135 } 1136 1137 #define ufshcd_set_sg_entry_size(hba, sg_entry_size) \ 1138 ({ (void)(hba); BUILD_BUG_ON(sg_entry_size != sizeof(struct ufshcd_sg_entry)); }) 1139 #endif 1140 1141 static inline size_t sizeof_utp_transfer_cmd_desc(const struct ufs_hba *hba) 1142 { 1143 return sizeof(struct utp_transfer_cmd_desc) + SG_ALL * ufshcd_sg_entry_size(hba); 1144 } 1145 1146 /* Returns true if clocks can be gated. Otherwise false */ 1147 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba) 1148 { 1149 return hba->caps & UFSHCD_CAP_CLK_GATING; 1150 } 1151 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba) 1152 { 1153 return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; 1154 } 1155 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba) 1156 { 1157 return hba->caps & UFSHCD_CAP_CLK_SCALING; 1158 } 1159 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) 1160 { 1161 return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND; 1162 } 1163 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba) 1164 { 1165 return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND; 1166 } 1167 1168 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) 1169 { 1170 return (hba->caps & UFSHCD_CAP_INTR_AGGR) && 1171 !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR); 1172 } 1173 1174 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba) 1175 { 1176 return !!(ufshcd_is_link_hibern8(hba) && 1177 (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE)); 1178 } 1179 1180 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) 1181 { 1182 return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) && 1183 !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8); 1184 } 1185 1186 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba) 1187 { 1188 return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit); 1189 } 1190 1191 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba) 1192 { 1193 return hba->caps & UFSHCD_CAP_WB_EN; 1194 } 1195 1196 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba) 1197 { 1198 return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING; 1199 } 1200 1201 #define ufsmcq_writel(hba, val, reg) \ 1202 writel((val), (hba)->mcq_base + (reg)) 1203 #define ufsmcq_readl(hba, reg) \ 1204 readl((hba)->mcq_base + (reg)) 1205 1206 #define ufsmcq_writelx(hba, val, reg) \ 1207 writel_relaxed((val), (hba)->mcq_base + (reg)) 1208 #define ufsmcq_readlx(hba, reg) \ 1209 readl_relaxed((hba)->mcq_base + (reg)) 1210 1211 #define ufshcd_writel(hba, val, reg) \ 1212 writel((val), (hba)->mmio_base + (reg)) 1213 #define ufshcd_readl(hba, reg) \ 1214 readl((hba)->mmio_base + (reg)) 1215 1216 /** 1217 * ufshcd_rmwl - perform read/modify/write for a controller register 1218 * @hba: per adapter instance 1219 * @mask: mask to apply on read value 1220 * @val: actual value to write 1221 * @reg: register address 1222 */ 1223 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) 1224 { 1225 u32 tmp; 1226 1227 tmp = ufshcd_readl(hba, reg); 1228 tmp &= ~mask; 1229 tmp |= (val & mask); 1230 ufshcd_writel(hba, tmp, reg); 1231 } 1232 1233 int ufshcd_alloc_host(struct device *, struct ufs_hba **); 1234 void ufshcd_dealloc_host(struct ufs_hba *); 1235 int ufshcd_hba_enable(struct ufs_hba *hba); 1236 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); 1237 int ufshcd_link_recovery(struct ufs_hba *hba); 1238 int ufshcd_make_hba_operational(struct ufs_hba *hba); 1239 void ufshcd_remove(struct ufs_hba *); 1240 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); 1241 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); 1242 void ufshcd_delay_us(unsigned long us, unsigned long tolerance); 1243 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); 1244 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); 1245 void ufshcd_hba_stop(struct ufs_hba *hba); 1246 void ufshcd_schedule_eh_work(struct ufs_hba *hba); 1247 void ufshcd_mcq_write_cqis(struct ufs_hba *hba, u32 val, int i); 1248 unsigned long ufshcd_mcq_poll_cqe_nolock(struct ufs_hba *hba, 1249 struct ufs_hw_queue *hwq); 1250 void ufshcd_mcq_enable_esi(struct ufs_hba *hba); 1251 void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg); 1252 1253 /** 1254 * ufshcd_set_variant - set variant specific data to the hba 1255 * @hba: per adapter instance 1256 * @variant: pointer to variant specific data 1257 */ 1258 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant) 1259 { 1260 BUG_ON(!hba); 1261 hba->priv = variant; 1262 } 1263 1264 /** 1265 * ufshcd_get_variant - get variant specific data from the hba 1266 * @hba: per adapter instance 1267 */ 1268 static inline void *ufshcd_get_variant(struct ufs_hba *hba) 1269 { 1270 BUG_ON(!hba); 1271 return hba->priv; 1272 } 1273 1274 #ifdef CONFIG_PM 1275 extern int ufshcd_runtime_suspend(struct device *dev); 1276 extern int ufshcd_runtime_resume(struct device *dev); 1277 #endif 1278 #ifdef CONFIG_PM_SLEEP 1279 extern int ufshcd_system_suspend(struct device *dev); 1280 extern int ufshcd_system_resume(struct device *dev); 1281 extern int ufshcd_system_freeze(struct device *dev); 1282 extern int ufshcd_system_thaw(struct device *dev); 1283 extern int ufshcd_system_restore(struct device *dev); 1284 #endif 1285 extern int ufshcd_shutdown(struct ufs_hba *hba); 1286 1287 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, 1288 int agreed_gear, 1289 int adapt_val); 1290 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, 1291 u8 attr_set, u32 mib_val, u8 peer); 1292 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, 1293 u32 *mib_val, u8 peer); 1294 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba, 1295 struct ufs_pa_layer_attr *desired_pwr_mode); 1296 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode); 1297 1298 /* UIC command interfaces for DME primitives */ 1299 #define DME_LOCAL 0 1300 #define DME_PEER 1 1301 #define ATTR_SET_NOR 0 /* NORMAL */ 1302 #define ATTR_SET_ST 1 /* STATIC */ 1303 1304 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, 1305 u32 mib_val) 1306 { 1307 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1308 mib_val, DME_LOCAL); 1309 } 1310 1311 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, 1312 u32 mib_val) 1313 { 1314 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1315 mib_val, DME_LOCAL); 1316 } 1317 1318 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, 1319 u32 mib_val) 1320 { 1321 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1322 mib_val, DME_PEER); 1323 } 1324 1325 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, 1326 u32 mib_val) 1327 { 1328 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1329 mib_val, DME_PEER); 1330 } 1331 1332 static inline int ufshcd_dme_get(struct ufs_hba *hba, 1333 u32 attr_sel, u32 *mib_val) 1334 { 1335 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); 1336 } 1337 1338 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, 1339 u32 attr_sel, u32 *mib_val) 1340 { 1341 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); 1342 } 1343 1344 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) 1345 { 1346 return (pwr_info->pwr_rx == FAST_MODE || 1347 pwr_info->pwr_rx == FASTAUTO_MODE) && 1348 (pwr_info->pwr_tx == FAST_MODE || 1349 pwr_info->pwr_tx == FASTAUTO_MODE); 1350 } 1351 1352 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba) 1353 { 1354 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); 1355 } 1356 1357 void ufshcd_auto_hibern8_enable(struct ufs_hba *hba); 1358 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit); 1359 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, 1360 const struct ufs_dev_quirk *fixups); 1361 #define SD_ASCII_STD true 1362 #define SD_RAW false 1363 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, 1364 u8 **buf, bool ascii); 1365 1366 int ufshcd_hold(struct ufs_hba *hba, bool async); 1367 void ufshcd_release(struct ufs_hba *hba); 1368 1369 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value); 1370 1371 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba); 1372 1373 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg); 1374 1375 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd); 1376 1377 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba, 1378 struct utp_upiu_req *req_upiu, 1379 struct utp_upiu_req *rsp_upiu, 1380 int msgcode, 1381 u8 *desc_buff, int *buff_len, 1382 enum query_opcode desc_op); 1383 int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu, 1384 struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req, 1385 struct ufs_ehs *ehs_rsp, int sg_cnt, 1386 struct scatterlist *sg_list, enum dma_data_direction dir); 1387 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); 1388 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable); 1389 int ufshcd_suspend_prepare(struct device *dev); 1390 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm); 1391 void ufshcd_resume_complete(struct device *dev); 1392 1393 /* Wrapper functions for safely calling variant operations */ 1394 static inline int ufshcd_vops_init(struct ufs_hba *hba) 1395 { 1396 if (hba->vops && hba->vops->init) 1397 return hba->vops->init(hba); 1398 1399 return 0; 1400 } 1401 1402 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba) 1403 { 1404 if (hba->vops && hba->vops->phy_initialization) 1405 return hba->vops->phy_initialization(hba); 1406 1407 return 0; 1408 } 1409 1410 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[]; 1411 1412 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, 1413 const char *prefix); 1414 1415 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask); 1416 int ufshcd_write_ee_control(struct ufs_hba *hba); 1417 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, 1418 const u16 *other_mask, u16 set, u16 clr); 1419 1420 #endif /* End of Header */ 1421