1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Copyright(c) 2007 Intel Corporation. All rights reserved. 4 * 5 * Maintained at www.Open-FCoE.org 6 */ 7 8 #ifndef _FC_FS_H_ 9 #define _FC_FS_H_ 10 11 #include <linux/types.h> 12 13 /* 14 * Fibre Channel Framing and Signalling definitions. 15 * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. 16 */ 17 18 /* 19 * Frame header 20 */ 21 struct fc_frame_header { 22 __u8 fh_r_ctl; /* routing control */ 23 __u8 fh_d_id[3]; /* Destination ID */ 24 25 __u8 fh_cs_ctl; /* class of service control / pri */ 26 __u8 fh_s_id[3]; /* Source ID */ 27 28 __u8 fh_type; /* see enum fc_fh_type below */ 29 __u8 fh_f_ctl[3]; /* frame control */ 30 31 __u8 fh_seq_id; /* sequence ID */ 32 __u8 fh_df_ctl; /* data field control */ 33 __be16 fh_seq_cnt; /* sequence count */ 34 35 __be16 fh_ox_id; /* originator exchange ID */ 36 __be16 fh_rx_id; /* responder exchange ID */ 37 __be32 fh_parm_offset; /* parameter or relative offset */ 38 }; 39 40 #define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ 41 42 #define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ 43 #define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ 44 45 #define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) 46 #define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) 47 48 /* 49 * fh_r_ctl - Routing control definitions. 50 */ 51 /* 52 * FC-4 device_data. 53 */ 54 enum fc_rctl { 55 FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ 56 FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ 57 FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ 58 FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ 59 FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ 60 FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ 61 FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ 62 FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ 63 64 #define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ 65 #define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ 66 67 /* 68 * Extended Link_Data 69 */ 70 FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ 71 FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ 72 FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ 73 FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ 74 /* 75 * Optional Extended Headers 76 */ 77 FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ 78 FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ 79 FC_RCTL_ENCH = 0x52, /* encapsulation header */ 80 /* 81 * Basic Link Services fh_r_ctl values. 82 */ 83 FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ 84 FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ 85 FC_RCTL_BA_RMC = 0x82, /* remove connection */ 86 FC_RCTL_BA_ACC = 0x84, /* basic accept */ 87 FC_RCTL_BA_RJT = 0x85, /* basic reject */ 88 FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ 89 /* 90 * Link Control Information. 91 */ 92 FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ 93 FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ 94 FC_RCTL_P_RJT = 0xc2, /* port reject */ 95 FC_RCTL_F_RJT = 0xc3, /* fabric reject */ 96 FC_RCTL_P_BSY = 0xc4, /* port busy */ 97 FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ 98 FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ 99 FC_RCTL_LCR = 0xc7, /* link credit reset */ 100 FC_RCTL_END = 0xc9, /* end */ 101 }; 102 /* incomplete list of definitions */ 103 104 /* 105 * R_CTL names initializer. 106 * Please keep this matching the above definitions. 107 */ 108 #define FC_RCTL_NAMES_INIT { \ 109 [FC_RCTL_DD_UNCAT] = "uncat", \ 110 [FC_RCTL_DD_SOL_DATA] = "sol data", \ 111 [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ 112 [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ 113 [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ 114 [FC_RCTL_DD_DATA_DESC] = "data desc", \ 115 [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ 116 [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ 117 [FC_RCTL_ELS_REQ] = "ELS req", \ 118 [FC_RCTL_ELS_REP] = "ELS rep", \ 119 [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ 120 [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ 121 [FC_RCTL_BA_NOP] = "BLS NOP", \ 122 [FC_RCTL_BA_ABTS] = "BLS abort", \ 123 [FC_RCTL_BA_RMC] = "BLS remove connection", \ 124 [FC_RCTL_BA_ACC] = "BLS accept", \ 125 [FC_RCTL_BA_RJT] = "BLS reject", \ 126 [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ 127 [FC_RCTL_ACK_1] = "LC ACK_1", \ 128 [FC_RCTL_ACK_0] = "LC ACK_0", \ 129 [FC_RCTL_P_RJT] = "LC port reject", \ 130 [FC_RCTL_F_RJT] = "LC fabric reject", \ 131 [FC_RCTL_P_BSY] = "LC port busy", \ 132 [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ 133 [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ 134 [FC_RCTL_LCR] = "LC link credit reset", \ 135 [FC_RCTL_END] = "LC end", \ 136 } 137 138 /* 139 * Well-known fabric addresses. 140 */ 141 enum fc_well_known_fid { 142 FC_FID_NONE = 0x000000, /* No destination */ 143 FC_FID_BCAST = 0xffffff, /* broadcast */ 144 FC_FID_FLOGI = 0xfffffe, /* fabric login */ 145 FC_FID_FCTRL = 0xfffffd, /* fabric controller */ 146 FC_FID_DIR_SERV = 0xfffffc, /* directory server */ 147 FC_FID_TIME_SERV = 0xfffffb, /* time server */ 148 FC_FID_MGMT_SERV = 0xfffffa, /* management server */ 149 FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ 150 FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ 151 FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ 152 FC_FID_CLOCK = 0xfffff6, /* clock synch server */ 153 FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ 154 }; 155 156 #define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ 157 #define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ 158 159 /* 160 * Other well-known addresses, outside the above contiguous range. 161 */ 162 #define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ 163 164 /* 165 * Fabric ID bytes. 166 */ 167 #define FC_FID_DOMAIN 0 168 #define FC_FID_PORT 1 169 #define FC_FID_LINK 2 170 171 /* 172 * fh_type codes 173 */ 174 enum fc_fh_type { 175 FC_TYPE_BLS = 0x00, /* basic link service */ 176 FC_TYPE_ELS = 0x01, /* extended link service */ 177 FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ 178 FC_TYPE_FCP = 0x08, /* SCSI FCP */ 179 FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ 180 FC_TYPE_ILS = 0x22, /* internal link service */ 181 FC_TYPE_NVME = 0x28, /* FC-NVME */ 182 }; 183 184 /* 185 * FC_TYPE names initializer. 186 * Please keep this matching the above definitions. 187 */ 188 #define FC_TYPE_NAMES_INIT { \ 189 [FC_TYPE_BLS] = "BLS", \ 190 [FC_TYPE_ELS] = "ELS", \ 191 [FC_TYPE_IP] = "IP", \ 192 [FC_TYPE_FCP] = "FCP", \ 193 [FC_TYPE_CT] = "CT", \ 194 [FC_TYPE_ILS] = "ILS", \ 195 [FC_TYPE_NVME] = "NVME", \ 196 } 197 198 /* 199 * Exchange IDs. 200 */ 201 #define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ 202 #define FC_XID_MIN 0x0 /* supported min exchange ID */ 203 #define FC_XID_MAX 0xfffe /* supported max exchange ID */ 204 205 /* 206 * fh_f_ctl - Frame control flags. 207 */ 208 #define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ 209 #define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ 210 #define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ 211 #define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ 212 #define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ 213 #define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ 214 #define FC_FC_RES_B17 (1 << 17) /* reserved */ 215 #define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ 216 #define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ 217 #define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ 218 219 #define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ 220 #define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ 221 #define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ 222 223 #define FC_FC_RES_B11 (1 << 11) /* reserved */ 224 #define FC_FC_RES_B10 (1 << 10) /* reserved */ 225 #define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ 226 #define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ 227 #define FC_FC_CONT_SEQ(i) ((i) << 6) 228 #define FC_FC_ABT_SEQ(i) ((i) << 4) 229 #define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ 230 #define FC_FC_RES2 (1 << 2) /* reserved */ 231 #define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ 232 233 /* 234 * BA_ACC payload. 235 */ 236 struct fc_ba_acc { 237 __u8 ba_seq_id_val; /* SEQ_ID validity */ 238 #define FC_BA_SEQ_ID_VAL 0x80 239 __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ 240 __u8 ba_resvd[2]; /* reserved */ 241 __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ 242 __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ 243 __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ 244 __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ 245 }; 246 247 /* 248 * BA_RJT: Basic Reject payload. 249 */ 250 struct fc_ba_rjt { 251 __u8 br_resvd; /* reserved */ 252 __u8 br_reason; /* reason code */ 253 __u8 br_explan; /* reason explanation */ 254 __u8 br_vendor; /* vendor unique code */ 255 }; 256 257 /* 258 * BA_RJT reason codes. 259 * From FS-2. 260 */ 261 enum fc_ba_rjt_reason { 262 FC_BA_RJT_NONE = 0, /* in software this means no reject */ 263 FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ 264 FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ 265 FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ 266 FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ 267 FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ 268 FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ 269 }; 270 271 /* 272 * BA_RJT reason code explanations. 273 */ 274 enum fc_ba_rjt_explan { 275 FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ 276 FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ 277 FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ 278 }; 279 280 /* 281 * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. 282 */ 283 struct fc_pf_rjt { 284 __u8 rj_action; /* reserved */ 285 __u8 rj_reason; /* reason code */ 286 __u8 rj_resvd; /* reserved */ 287 __u8 rj_vendor; /* vendor unique code */ 288 }; 289 290 /* 291 * P_RJT and F_RJT reject reason codes. 292 */ 293 enum fc_pf_rjt_reason { 294 FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ 295 FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ 296 FC_RJT_INVL_SID = 0x02, /* invalid source ID */ 297 FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ 298 FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ 299 FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ 300 FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ 301 FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ 302 FC_RJT_LINK_CTL = 0x08, /* invalid link control */ 303 FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ 304 FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ 305 FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ 306 FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ 307 FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ 308 FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ 309 FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ 310 FC_RJT_PARAM = 0x10, /* invalid parameter field */ 311 FC_RJT_EXCH_ERR = 0x11, /* exchange error */ 312 FC_RJT_PROTO = 0x12, /* protocol error */ 313 FC_RJT_LEN = 0x13, /* incorrect length */ 314 FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ 315 FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ 316 FC_RJT_LOGI_REQ = 0x16, /* login required */ 317 FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ 318 FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ 319 FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ 320 FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ 321 FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ 322 FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ 323 FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ 324 FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ 325 FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ 326 FC_RJT_MCAST_ERR = 0x22, /* multicast error */ 327 FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ 328 FC_RJT_PRLI_REQ = 0x24, /* process login required */ 329 FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ 330 FC_RJT_VENDOR = 0xff, /* vendor specific reject */ 331 }; 332 333 /* default timeout values */ 334 335 #define FC_DEF_E_D_TOV 2000UL 336 #define FC_DEF_R_A_TOV 10000UL 337 338 #endif /* _FC_FS_H_ */ 339