1 /* 2 * This file define a set of standard wireless extensions 3 * 4 * Version : 22 16.3.07 5 * 6 * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> 7 * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. 8 */ 9 10 #ifndef _UAPI_LINUX_WIRELESS_H 11 #define _UAPI_LINUX_WIRELESS_H 12 13 /************************** DOCUMENTATION **************************/ 14 /* 15 * Initial APIs (1996 -> onward) : 16 * ----------------------------- 17 * Basically, the wireless extensions are for now a set of standard ioctl 18 * call + /proc/net/wireless 19 * 20 * The entry /proc/net/wireless give statistics and information on the 21 * driver. 22 * This is better than having each driver having its entry because 23 * its centralised and we may remove the driver module safely. 24 * 25 * Ioctl are used to configure the driver and issue commands. This is 26 * better than command line options of insmod because we may want to 27 * change dynamically (while the driver is running) some parameters. 28 * 29 * The ioctl mechanimsm are copied from standard devices ioctl. 30 * We have the list of command plus a structure descibing the 31 * data exchanged... 32 * Note that to add these ioctl, I was obliged to modify : 33 * # net/core/dev.c (two place + add include) 34 * # net/ipv4/af_inet.c (one place + add include) 35 * 36 * /proc/net/wireless is a copy of /proc/net/dev. 37 * We have a structure for data passed from the driver to /proc/net/wireless 38 * Too add this, I've modified : 39 * # net/core/dev.c (two other places) 40 * # include/linux/netdevice.h (one place) 41 * # include/linux/proc_fs.h (one place) 42 * 43 * New driver API (2002 -> onward) : 44 * ------------------------------- 45 * This file is only concerned with the user space API and common definitions. 46 * The new driver API is defined and documented in : 47 * # include/net/iw_handler.h 48 * 49 * Note as well that /proc/net/wireless implementation has now moved in : 50 * # net/core/wireless.c 51 * 52 * Wireless Events (2002 -> onward) : 53 * -------------------------------- 54 * Events are defined at the end of this file, and implemented in : 55 * # net/core/wireless.c 56 * 57 * Other comments : 58 * -------------- 59 * Do not add here things that are redundant with other mechanisms 60 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not 61 * wireless specific. 62 * 63 * These wireless extensions are not magic : each driver has to provide 64 * support for them... 65 * 66 * IMPORTANT NOTE : As everything in the kernel, this is very much a 67 * work in progress. Contact me if you have ideas of improvements... 68 */ 69 70 /***************************** INCLUDES *****************************/ 71 72 #include <linux/types.h> /* for __u* and __s* typedefs */ 73 #include <linux/socket.h> /* for "struct sockaddr" et al */ 74 #include <linux/if.h> /* for IFNAMSIZ and co... */ 75 76 /***************************** VERSION *****************************/ 77 /* 78 * This constant is used to know the availability of the wireless 79 * extensions and to know which version of wireless extensions it is 80 * (there is some stuff that will be added in the future...) 81 * I just plan to increment with each new version. 82 */ 83 #define WIRELESS_EXT 22 84 85 /* 86 * Changes : 87 * 88 * V2 to V3 89 * -------- 90 * Alan Cox start some incompatibles changes. I've integrated a bit more. 91 * - Encryption renamed to Encode to avoid US regulation problems 92 * - Frequency changed from float to struct to avoid problems on old 386 93 * 94 * V3 to V4 95 * -------- 96 * - Add sensitivity 97 * 98 * V4 to V5 99 * -------- 100 * - Missing encoding definitions in range 101 * - Access points stuff 102 * 103 * V5 to V6 104 * -------- 105 * - 802.11 support (ESSID ioctls) 106 * 107 * V6 to V7 108 * -------- 109 * - define IW_ESSID_MAX_SIZE and IW_MAX_AP 110 * 111 * V7 to V8 112 * -------- 113 * - Changed my e-mail address 114 * - More 802.11 support (nickname, rate, rts, frag) 115 * - List index in frequencies 116 * 117 * V8 to V9 118 * -------- 119 * - Support for 'mode of operation' (ad-hoc, managed...) 120 * - Support for unicast and multicast power saving 121 * - Change encoding to support larger tokens (>64 bits) 122 * - Updated iw_params (disable, flags) and use it for NWID 123 * - Extracted iw_point from iwreq for clarity 124 * 125 * V9 to V10 126 * --------- 127 * - Add PM capability to range structure 128 * - Add PM modifier : MAX/MIN/RELATIVE 129 * - Add encoding option : IW_ENCODE_NOKEY 130 * - Add TxPower ioctls (work like TxRate) 131 * 132 * V10 to V11 133 * ---------- 134 * - Add WE version in range (help backward/forward compatibility) 135 * - Add retry ioctls (work like PM) 136 * 137 * V11 to V12 138 * ---------- 139 * - Add SIOCSIWSTATS to get /proc/net/wireless programatically 140 * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space 141 * - Add new statistics (frag, retry, beacon) 142 * - Add average quality (for user space calibration) 143 * 144 * V12 to V13 145 * ---------- 146 * - Document creation of new driver API. 147 * - Extract union iwreq_data from struct iwreq (for new driver API). 148 * - Rename SIOCSIWNAME as SIOCSIWCOMMIT 149 * 150 * V13 to V14 151 * ---------- 152 * - Wireless Events support : define struct iw_event 153 * - Define additional specific event numbers 154 * - Add "addr" and "param" fields in union iwreq_data 155 * - AP scanning stuff (SIOCSIWSCAN and friends) 156 * 157 * V14 to V15 158 * ---------- 159 * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg 160 * - Make struct iw_freq signed (both m & e), add explicit padding 161 * - Add IWEVCUSTOM for driver specific event/scanning token 162 * - Add IW_MAX_GET_SPY for driver returning a lot of addresses 163 * - Add IW_TXPOW_RANGE for range of Tx Powers 164 * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points 165 * - Add IW_MODE_MONITOR for passive monitor 166 * 167 * V15 to V16 168 * ---------- 169 * - Increase the number of bitrates in iw_range to 32 (for 802.11g) 170 * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) 171 * - Reshuffle struct iw_range for increases, add filler 172 * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses 173 * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support 174 * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" 175 * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index 176 * 177 * V16 to V17 178 * ---------- 179 * - Add flags to frequency -> auto/fixed 180 * - Document (struct iw_quality *)->updated, add new flags (INVALID) 181 * - Wireless Event capability in struct iw_range 182 * - Add support for relative TxPower (yick !) 183 * 184 * V17 to V18 (From Jouni Malinen <j@w1.fi>) 185 * ---------- 186 * - Add support for WPA/WPA2 187 * - Add extended encoding configuration (SIOCSIWENCODEEXT and 188 * SIOCGIWENCODEEXT) 189 * - Add SIOCSIWGENIE/SIOCGIWGENIE 190 * - Add SIOCSIWMLME 191 * - Add SIOCSIWPMKSA 192 * - Add struct iw_range bit field for supported encoding capabilities 193 * - Add optional scan request parameters for SIOCSIWSCAN 194 * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA 195 * related parameters (extensible up to 4096 parameter values) 196 * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, 197 * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND 198 * 199 * V18 to V19 200 * ---------- 201 * - Remove (struct iw_point *)->pointer from events and streams 202 * - Remove header includes to help user space 203 * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 204 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros 205 * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM 206 * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros 207 * 208 * V19 to V20 209 * ---------- 210 * - RtNetlink requests support (SET/GET) 211 * 212 * V20 to V21 213 * ---------- 214 * - Remove (struct net_device *)->get_wireless_stats() 215 * - Change length in ESSID and NICK to strlen() instead of strlen()+1 216 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers 217 * - Power/Retry relative values no longer * 100000 218 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI 219 * 220 * V21 to V22 221 * ---------- 222 * - Prevent leaking of kernel space in stream on 64 bits. 223 */ 224 225 /**************************** CONSTANTS ****************************/ 226 227 /* -------------------------- IOCTL LIST -------------------------- */ 228 229 /* Wireless Identification */ 230 #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ 231 #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ 232 /* SIOCGIWNAME is used to verify the presence of Wireless Extensions. 233 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... 234 * Don't put the name of your driver there, it's useless. */ 235 236 /* Basic operations */ 237 #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ 238 #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ 239 #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ 240 #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ 241 #define SIOCSIWMODE 0x8B06 /* set operation mode */ 242 #define SIOCGIWMODE 0x8B07 /* get operation mode */ 243 #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ 244 #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ 245 246 /* Informative stuff */ 247 #define SIOCSIWRANGE 0x8B0A /* Unused */ 248 #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ 249 #define SIOCSIWPRIV 0x8B0C /* Unused */ 250 #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ 251 #define SIOCSIWSTATS 0x8B0E /* Unused */ 252 #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ 253 /* SIOCGIWSTATS is strictly used between user space and the kernel, and 254 * is never passed to the driver (i.e. the driver will never see it). */ 255 256 /* Spy support (statistics per MAC address - used for Mobile IP support) */ 257 #define SIOCSIWSPY 0x8B10 /* set spy addresses */ 258 #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ 259 #define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ 260 #define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ 261 262 /* Access Point manipulation */ 263 #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ 264 #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ 265 #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ 266 #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ 267 #define SIOCGIWSCAN 0x8B19 /* get scanning results */ 268 269 /* 802.11 specific support */ 270 #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ 271 #define SIOCGIWESSID 0x8B1B /* get ESSID */ 272 #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ 273 #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ 274 /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit 275 * within the 'iwreq' structure, so we need to use the 'data' member to 276 * point to a string in user space, like it is done for RANGE... */ 277 278 /* Other parameters useful in 802.11 and some other devices */ 279 #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ 280 #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ 281 #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ 282 #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ 283 #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ 284 #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ 285 #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ 286 #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ 287 #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ 288 #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ 289 290 /* Encoding stuff (scrambling, hardware security, WEP...) */ 291 #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ 292 #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ 293 /* Power saving stuff (power management, unicast and multicast) */ 294 #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ 295 #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ 296 297 /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). 298 * This ioctl uses struct iw_point and data buffer that includes IE id and len 299 * fields. More than one IE may be included in the request. Setting the generic 300 * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers 301 * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers 302 * are required to report the used IE as a wireless event, e.g., when 303 * associating with an AP. */ 304 #define SIOCSIWGENIE 0x8B30 /* set generic IE */ 305 #define SIOCGIWGENIE 0x8B31 /* get generic IE */ 306 307 /* WPA : IEEE 802.11 MLME requests */ 308 #define SIOCSIWMLME 0x8B16 /* request MLME operation; uses 309 * struct iw_mlme */ 310 /* WPA : Authentication mode parameters */ 311 #define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ 312 #define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ 313 314 /* WPA : Extended version of encoding configuration */ 315 #define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ 316 #define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ 317 318 /* WPA2 : PMKSA cache management */ 319 #define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ 320 321 /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ 322 323 /* These 32 ioctl are wireless device private, for 16 commands. 324 * Each driver is free to use them for whatever purpose it chooses, 325 * however the driver *must* export the description of those ioctls 326 * with SIOCGIWPRIV and *must* use arguments as defined below. 327 * If you don't follow those rules, DaveM is going to hate you (reason : 328 * it make mixed 32/64bit operation impossible). 329 */ 330 #define SIOCIWFIRSTPRIV 0x8BE0 331 #define SIOCIWLASTPRIV 0x8BFF 332 /* Previously, we were using SIOCDEVPRIVATE, but we now have our 333 * separate range because of collisions with other tools such as 334 * 'mii-tool'. 335 * We now have 32 commands, so a bit more space ;-). 336 * Also, all 'even' commands are only usable by root and don't return the 337 * content of ifr/iwr to user (but you are not obliged to use the set/get 338 * convention, just use every other two command). More details in iwpriv.c. 339 * And I repeat : you are not forced to use them with iwpriv, but you 340 * must be compliant with it. 341 */ 342 343 /* ------------------------- IOCTL STUFF ------------------------- */ 344 345 /* The first and the last (range) */ 346 #define SIOCIWFIRST 0x8B00 347 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ 348 #define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) 349 #define IW_HANDLER(id, func) \ 350 [IW_IOCTL_IDX(id)] = func 351 352 /* Odd : get (world access), even : set (root access) */ 353 #define IW_IS_SET(cmd) (!((cmd) & 0x1)) 354 #define IW_IS_GET(cmd) ((cmd) & 0x1) 355 356 /* ----------------------- WIRELESS EVENTS ----------------------- */ 357 /* Those are *NOT* ioctls, do not issue request on them !!! */ 358 /* Most events use the same identifier as ioctl requests */ 359 360 #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ 361 #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ 362 #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ 363 #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ 364 #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ 365 #define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) 366 * (scan results); This includes id and 367 * length fields. One IWEVGENIE may 368 * contain more than one IE. Scan 369 * results may contain one or more 370 * IWEVGENIE events. */ 371 #define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure 372 * (struct iw_michaelmicfailure) 373 */ 374 #define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. 375 * The data includes id and length 376 * fields and may contain more than one 377 * IE. This event is required in 378 * Managed mode if the driver 379 * generates its own WPA/RSN IE. This 380 * should be sent just before 381 * IWEVREGISTERED event for the 382 * association. */ 383 #define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association 384 * Response. The data includes id and 385 * length fields and may contain more 386 * than one IE. This may be sent 387 * between IWEVASSOCREQIE and 388 * IWEVREGISTERED events for the 389 * association. */ 390 #define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN 391 * pre-authentication 392 * (struct iw_pmkid_cand) */ 393 394 #define IWEVFIRST 0x8C00 395 #define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) 396 397 /* ------------------------- PRIVATE INFO ------------------------- */ 398 /* 399 * The following is used with SIOCGIWPRIV. It allow a driver to define 400 * the interface (name, type of data) for its private ioctl. 401 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV 402 */ 403 404 #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ 405 #define IW_PRIV_TYPE_NONE 0x0000 406 #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ 407 #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ 408 #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ 409 #define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ 410 #define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ 411 412 #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ 413 414 #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ 415 416 /* 417 * Note : if the number of args is fixed and the size < 16 octets, 418 * instead of passing a pointer we will put args in the iwreq struct... 419 */ 420 421 /* ----------------------- OTHER CONSTANTS ----------------------- */ 422 423 /* Maximum frequencies in the range struct */ 424 #define IW_MAX_FREQUENCIES 32 425 /* Note : if you have something like 80 frequencies, 426 * don't increase this constant and don't fill the frequency list. 427 * The user will be able to set by channel anyway... */ 428 429 /* Maximum bit rates in the range struct */ 430 #define IW_MAX_BITRATES 32 431 432 /* Maximum tx powers in the range struct */ 433 #define IW_MAX_TXPOWER 8 434 /* Note : if you more than 8 TXPowers, just set the max and min or 435 * a few of them in the struct iw_range. */ 436 437 /* Maximum of address that you may set with SPY */ 438 #define IW_MAX_SPY 8 439 440 /* Maximum of address that you may get in the 441 list of access points in range */ 442 #define IW_MAX_AP 64 443 444 /* Maximum size of the ESSID and NICKN strings */ 445 #define IW_ESSID_MAX_SIZE 32 446 447 /* Modes of operation */ 448 #define IW_MODE_AUTO 0 /* Let the driver decides */ 449 #define IW_MODE_ADHOC 1 /* Single cell network */ 450 #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ 451 #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ 452 #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ 453 #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ 454 #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ 455 #define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ 456 457 /* Statistics flags (bitmask in updated) */ 458 #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ 459 #define IW_QUAL_LEVEL_UPDATED 0x02 460 #define IW_QUAL_NOISE_UPDATED 0x04 461 #define IW_QUAL_ALL_UPDATED 0x07 462 #define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ 463 #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ 464 #define IW_QUAL_LEVEL_INVALID 0x20 465 #define IW_QUAL_NOISE_INVALID 0x40 466 #define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ 467 #define IW_QUAL_ALL_INVALID 0x70 468 469 /* Frequency flags */ 470 #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ 471 #define IW_FREQ_FIXED 0x01 /* Force a specific value */ 472 473 /* Maximum number of size of encoding token available 474 * they are listed in the range structure */ 475 #define IW_MAX_ENCODING_SIZES 8 476 477 /* Maximum size of the encoding token in bytes */ 478 #define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ 479 480 /* Flags for encoding (along with the token) */ 481 #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ 482 #define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ 483 #define IW_ENCODE_MODE 0xF000 /* Modes defined below */ 484 #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ 485 #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ 486 #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ 487 #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ 488 #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ 489 #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ 490 491 /* Power management flags available (along with the value, if any) */ 492 #define IW_POWER_ON 0x0000 /* No details... */ 493 #define IW_POWER_TYPE 0xF000 /* Type of parameter */ 494 #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ 495 #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ 496 #define IW_POWER_MODE 0x0F00 /* Power Management mode */ 497 #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ 498 #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ 499 #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ 500 #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ 501 #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ 502 #define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ 503 #define IW_POWER_MIN 0x0001 /* Value is a minimum */ 504 #define IW_POWER_MAX 0x0002 /* Value is a maximum */ 505 #define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 506 507 /* Transmit Power flags available */ 508 #define IW_TXPOW_TYPE 0x00FF /* Type of value */ 509 #define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ 510 #define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ 511 #define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ 512 #define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ 513 514 /* Retry limits and lifetime flags available */ 515 #define IW_RETRY_ON 0x0000 /* No details... */ 516 #define IW_RETRY_TYPE 0xF000 /* Type of parameter */ 517 #define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ 518 #define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ 519 #define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ 520 #define IW_RETRY_MIN 0x0001 /* Value is a minimum */ 521 #define IW_RETRY_MAX 0x0002 /* Value is a maximum */ 522 #define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 523 #define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ 524 #define IW_RETRY_LONG 0x0020 /* Value is for long packets */ 525 526 /* Scanning request flags */ 527 #define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ 528 #define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ 529 #define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ 530 #define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ 531 #define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ 532 #define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ 533 #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ 534 #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 535 #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ 536 /* struct iw_scan_req scan_type */ 537 #define IW_SCAN_TYPE_ACTIVE 0 538 #define IW_SCAN_TYPE_PASSIVE 1 539 /* Maximum size of returned data */ 540 #define IW_SCAN_MAX_DATA 4096 /* In bytes */ 541 542 /* Scan capability flags - in (struct iw_range *)->scan_capa */ 543 #define IW_SCAN_CAPA_NONE 0x00 544 #define IW_SCAN_CAPA_ESSID 0x01 545 #define IW_SCAN_CAPA_BSSID 0x02 546 #define IW_SCAN_CAPA_CHANNEL 0x04 547 #define IW_SCAN_CAPA_MODE 0x08 548 #define IW_SCAN_CAPA_RATE 0x10 549 #define IW_SCAN_CAPA_TYPE 0x20 550 #define IW_SCAN_CAPA_TIME 0x40 551 552 /* Max number of char in custom event - use multiple of them if needed */ 553 #define IW_CUSTOM_MAX 256 /* In bytes */ 554 555 /* Generic information element */ 556 #define IW_GENERIC_IE_MAX 1024 557 558 /* MLME requests (SIOCSIWMLME / struct iw_mlme) */ 559 #define IW_MLME_DEAUTH 0 560 #define IW_MLME_DISASSOC 1 561 #define IW_MLME_AUTH 2 562 #define IW_MLME_ASSOC 3 563 564 /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ 565 #define IW_AUTH_INDEX 0x0FFF 566 #define IW_AUTH_FLAGS 0xF000 567 /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) 568 * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the 569 * parameter that is being set/get to; value will be read/written to 570 * struct iw_param value field) */ 571 #define IW_AUTH_WPA_VERSION 0 572 #define IW_AUTH_CIPHER_PAIRWISE 1 573 #define IW_AUTH_CIPHER_GROUP 2 574 #define IW_AUTH_KEY_MGMT 3 575 #define IW_AUTH_TKIP_COUNTERMEASURES 4 576 #define IW_AUTH_DROP_UNENCRYPTED 5 577 #define IW_AUTH_80211_AUTH_ALG 6 578 #define IW_AUTH_WPA_ENABLED 7 579 #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 580 #define IW_AUTH_ROAMING_CONTROL 9 581 #define IW_AUTH_PRIVACY_INVOKED 10 582 #define IW_AUTH_CIPHER_GROUP_MGMT 11 583 #define IW_AUTH_MFP 12 584 585 /* IW_AUTH_WPA_VERSION values (bit field) */ 586 #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 587 #define IW_AUTH_WPA_VERSION_WPA 0x00000002 588 #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 589 590 /* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT 591 * values (bit field) */ 592 #define IW_AUTH_CIPHER_NONE 0x00000001 593 #define IW_AUTH_CIPHER_WEP40 0x00000002 594 #define IW_AUTH_CIPHER_TKIP 0x00000004 595 #define IW_AUTH_CIPHER_CCMP 0x00000008 596 #define IW_AUTH_CIPHER_WEP104 0x00000010 597 #define IW_AUTH_CIPHER_AES_CMAC 0x00000020 598 599 /* IW_AUTH_KEY_MGMT values (bit field) */ 600 #define IW_AUTH_KEY_MGMT_802_1X 1 601 #define IW_AUTH_KEY_MGMT_PSK 2 602 603 /* IW_AUTH_80211_AUTH_ALG values (bit field) */ 604 #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 605 #define IW_AUTH_ALG_SHARED_KEY 0x00000002 606 #define IW_AUTH_ALG_LEAP 0x00000004 607 608 /* IW_AUTH_ROAMING_CONTROL values */ 609 #define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ 610 #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming 611 * control */ 612 613 /* IW_AUTH_MFP (management frame protection) values */ 614 #define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ 615 #define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ 616 #define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ 617 618 /* SIOCSIWENCODEEXT definitions */ 619 #define IW_ENCODE_SEQ_MAX_SIZE 8 620 /* struct iw_encode_ext ->alg */ 621 #define IW_ENCODE_ALG_NONE 0 622 #define IW_ENCODE_ALG_WEP 1 623 #define IW_ENCODE_ALG_TKIP 2 624 #define IW_ENCODE_ALG_CCMP 3 625 #define IW_ENCODE_ALG_PMK 4 626 #define IW_ENCODE_ALG_AES_CMAC 5 627 /* struct iw_encode_ext ->ext_flags */ 628 #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 629 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 630 #define IW_ENCODE_EXT_GROUP_KEY 0x00000004 631 #define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 632 633 /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ 634 #define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ 635 #define IW_MICFAILURE_GROUP 0x00000004 636 #define IW_MICFAILURE_PAIRWISE 0x00000008 637 #define IW_MICFAILURE_STAKEY 0x00000010 638 #define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) 639 */ 640 641 /* Bit field values for enc_capa in struct iw_range */ 642 #define IW_ENC_CAPA_WPA 0x00000001 643 #define IW_ENC_CAPA_WPA2 0x00000002 644 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 645 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 646 #define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 647 648 /* Event capability macros - in (struct iw_range *)->event_capa 649 * Because we have more than 32 possible events, we use an array of 650 * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ 651 #define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ 652 (cmd - SIOCIWFIRSTPRIV + 0x60) : \ 653 (cmd - SIOCIWFIRST)) 654 #define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) 655 #define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) 656 /* Event capability constants - event autogenerated by the kernel 657 * This list is valid for most 802.11 devices, customise as needed... */ 658 #define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ 659 IW_EVENT_CAPA_MASK(0x8B06) | \ 660 IW_EVENT_CAPA_MASK(0x8B1A)) 661 #define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) 662 /* "Easy" macro to set events in iw_range (less efficient) */ 663 #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) 664 #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } 665 666 667 /****************************** TYPES ******************************/ 668 669 /* --------------------------- SUBTYPES --------------------------- */ 670 /* 671 * Generic format for most parameters that fit in an int 672 */ 673 struct iw_param { 674 __s32 value; /* The value of the parameter itself */ 675 __u8 fixed; /* Hardware should not use auto select */ 676 __u8 disabled; /* Disable the feature */ 677 __u16 flags; /* Various specifc flags (if any) */ 678 }; 679 680 /* 681 * For all data larger than 16 octets, we need to use a 682 * pointer to memory allocated in user space. 683 */ 684 struct iw_point { 685 void __user *pointer; /* Pointer to the data (in user space) */ 686 __u16 length; /* number of fields or size in bytes */ 687 __u16 flags; /* Optional params */ 688 }; 689 690 691 /* 692 * A frequency 693 * For numbers lower than 10^9, we encode the number in 'm' and 694 * set 'e' to 0 695 * For number greater than 10^9, we divide it by the lowest power 696 * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... 697 * The power of 10 is in 'e', the result of the division is in 'm'. 698 */ 699 struct iw_freq { 700 __s32 m; /* Mantissa */ 701 __s16 e; /* Exponent */ 702 __u8 i; /* List index (when in range struct) */ 703 __u8 flags; /* Flags (fixed/auto) */ 704 }; 705 706 /* 707 * Quality of the link 708 */ 709 struct iw_quality { 710 __u8 qual; /* link quality (%retries, SNR, 711 %missed beacons or better...) */ 712 __u8 level; /* signal level (dBm) */ 713 __u8 noise; /* noise level (dBm) */ 714 __u8 updated; /* Flags to know if updated */ 715 }; 716 717 /* 718 * Packet discarded in the wireless adapter due to 719 * "wireless" specific problems... 720 * Note : the list of counter and statistics in net_device_stats 721 * is already pretty exhaustive, and you should use that first. 722 * This is only additional stats... 723 */ 724 struct iw_discarded { 725 __u32 nwid; /* Rx : Wrong nwid/essid */ 726 __u32 code; /* Rx : Unable to code/decode (WEP) */ 727 __u32 fragment; /* Rx : Can't perform MAC reassembly */ 728 __u32 retries; /* Tx : Max MAC retries num reached */ 729 __u32 misc; /* Others cases */ 730 }; 731 732 /* 733 * Packet/Time period missed in the wireless adapter due to 734 * "wireless" specific problems... 735 */ 736 struct iw_missed { 737 __u32 beacon; /* Missed beacons/superframe */ 738 }; 739 740 /* 741 * Quality range (for spy threshold) 742 */ 743 struct iw_thrspy { 744 struct sockaddr addr; /* Source address (hw/mac) */ 745 struct iw_quality qual; /* Quality of the link */ 746 struct iw_quality low; /* Low threshold */ 747 struct iw_quality high; /* High threshold */ 748 }; 749 750 /* 751 * Optional data for scan request 752 * 753 * Note: these optional parameters are controlling parameters for the 754 * scanning behavior, these do not apply to getting scan results 755 * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and 756 * provide a merged results with all BSSes even if the previous scan 757 * request limited scanning to a subset, e.g., by specifying an SSID. 758 * Especially, scan results are required to include an entry for the 759 * current BSS if the driver is in Managed mode and associated with an AP. 760 */ 761 struct iw_scan_req { 762 __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ 763 __u8 essid_len; 764 __u8 num_channels; /* num entries in channel_list; 765 * 0 = scan all allowed channels */ 766 __u8 flags; /* reserved as padding; use zero, this may 767 * be used in the future for adding flags 768 * to request different scan behavior */ 769 struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or 770 * individual address of a specific BSS */ 771 772 /* 773 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using 774 * the current ESSID. This allows scan requests for specific ESSID 775 * without having to change the current ESSID and potentially breaking 776 * the current association. 777 */ 778 __u8 essid[IW_ESSID_MAX_SIZE]; 779 780 /* 781 * Optional parameters for changing the default scanning behavior. 782 * These are based on the MLME-SCAN.request from IEEE Std 802.11. 783 * TU is 1.024 ms. If these are set to 0, driver is expected to use 784 * reasonable default values. min_channel_time defines the time that 785 * will be used to wait for the first reply on each channel. If no 786 * replies are received, next channel will be scanned after this. If 787 * replies are received, total time waited on the channel is defined by 788 * max_channel_time. 789 */ 790 __u32 min_channel_time; /* in TU */ 791 __u32 max_channel_time; /* in TU */ 792 793 struct iw_freq channel_list[IW_MAX_FREQUENCIES]; 794 }; 795 796 /* ------------------------- WPA SUPPORT ------------------------- */ 797 798 /* 799 * Extended data structure for get/set encoding (this is used with 800 * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* 801 * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and 802 * only the data contents changes (key data -> this structure, including 803 * key data). 804 * 805 * If the new key is the first group key, it will be set as the default 806 * TX key. Otherwise, default TX key index is only changed if 807 * IW_ENCODE_EXT_SET_TX_KEY flag is set. 808 * 809 * Key will be changed with SIOCSIWENCODEEXT in all cases except for 810 * special "change TX key index" operation which is indicated by setting 811 * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. 812 * 813 * tx_seq/rx_seq are only used when respective 814 * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal 815 * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start 816 * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally 817 * used only by an Authenticator (AP or an IBSS station) to get the 818 * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and 819 * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for 820 * debugging/testing. 821 */ 822 struct iw_encode_ext { 823 __u32 ext_flags; /* IW_ENCODE_EXT_* */ 824 __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 825 __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 826 struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast 827 * (group) keys or unicast address for 828 * individual keys */ 829 __u16 alg; /* IW_ENCODE_ALG_* */ 830 __u16 key_len; 831 __u8 key[0]; 832 }; 833 834 /* SIOCSIWMLME data */ 835 struct iw_mlme { 836 __u16 cmd; /* IW_MLME_* */ 837 __u16 reason_code; 838 struct sockaddr addr; 839 }; 840 841 /* SIOCSIWPMKSA data */ 842 #define IW_PMKSA_ADD 1 843 #define IW_PMKSA_REMOVE 2 844 #define IW_PMKSA_FLUSH 3 845 846 #define IW_PMKID_LEN 16 847 848 struct iw_pmksa { 849 __u32 cmd; /* IW_PMKSA_* */ 850 struct sockaddr bssid; 851 __u8 pmkid[IW_PMKID_LEN]; 852 }; 853 854 /* IWEVMICHAELMICFAILURE data */ 855 struct iw_michaelmicfailure { 856 __u32 flags; 857 struct sockaddr src_addr; 858 __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 859 }; 860 861 /* IWEVPMKIDCAND data */ 862 #define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ 863 struct iw_pmkid_cand { 864 __u32 flags; /* IW_PMKID_CAND_* */ 865 __u32 index; /* the smaller the index, the higher the 866 * priority */ 867 struct sockaddr bssid; 868 }; 869 870 /* ------------------------ WIRELESS STATS ------------------------ */ 871 /* 872 * Wireless statistics (used for /proc/net/wireless) 873 */ 874 struct iw_statistics { 875 __u16 status; /* Status 876 * - device dependent for now */ 877 878 struct iw_quality qual; /* Quality of the link 879 * (instant/mean/max) */ 880 struct iw_discarded discard; /* Packet discarded counts */ 881 struct iw_missed miss; /* Packet missed counts */ 882 }; 883 884 /* ------------------------ IOCTL REQUEST ------------------------ */ 885 /* 886 * This structure defines the payload of an ioctl, and is used 887 * below. 888 * 889 * Note that this structure should fit on the memory footprint 890 * of iwreq (which is the same as ifreq), which mean a max size of 891 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... 892 * You should check this when increasing the structures defined 893 * above in this file... 894 */ 895 union iwreq_data { 896 /* Config - generic */ 897 char name[IFNAMSIZ]; 898 /* Name : used to verify the presence of wireless extensions. 899 * Name of the protocol/provider... */ 900 901 struct iw_point essid; /* Extended network name */ 902 struct iw_param nwid; /* network id (or domain - the cell) */ 903 struct iw_freq freq; /* frequency or channel : 904 * 0-1000 = channel 905 * > 1000 = frequency in Hz */ 906 907 struct iw_param sens; /* signal level threshold */ 908 struct iw_param bitrate; /* default bit rate */ 909 struct iw_param txpower; /* default transmit power */ 910 struct iw_param rts; /* RTS threshold threshold */ 911 struct iw_param frag; /* Fragmentation threshold */ 912 __u32 mode; /* Operation mode */ 913 struct iw_param retry; /* Retry limits & lifetime */ 914 915 struct iw_point encoding; /* Encoding stuff : tokens */ 916 struct iw_param power; /* PM duration/timeout */ 917 struct iw_quality qual; /* Quality part of statistics */ 918 919 struct sockaddr ap_addr; /* Access point address */ 920 struct sockaddr addr; /* Destination address (hw/mac) */ 921 922 struct iw_param param; /* Other small parameters */ 923 struct iw_point data; /* Other large parameters */ 924 }; 925 926 /* 927 * The structure to exchange data for ioctl. 928 * This structure is the same as 'struct ifreq', but (re)defined for 929 * convenience... 930 * Do I need to remind you about structure size (32 octets) ? 931 */ 932 struct iwreq { 933 union 934 { 935 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ 936 } ifr_ifrn; 937 938 /* Data part (defined just above) */ 939 union iwreq_data u; 940 }; 941 942 /* -------------------------- IOCTL DATA -------------------------- */ 943 /* 944 * For those ioctl which want to exchange mode data that what could 945 * fit in the above structure... 946 */ 947 948 /* 949 * Range of parameters 950 */ 951 952 struct iw_range { 953 /* Informative stuff (to choose between different interface) */ 954 __u32 throughput; /* To give an idea... */ 955 /* In theory this value should be the maximum benchmarked 956 * TCP/IP throughput, because with most of these devices the 957 * bit rate is meaningless (overhead an co) to estimate how 958 * fast the connection will go and pick the fastest one. 959 * I suggest people to play with Netperf or any benchmark... 960 */ 961 962 /* NWID (or domain id) */ 963 __u32 min_nwid; /* Minimal NWID we are able to set */ 964 __u32 max_nwid; /* Maximal NWID we are able to set */ 965 966 /* Old Frequency (backward compat - moved lower ) */ 967 __u16 old_num_channels; 968 __u8 old_num_frequency; 969 970 /* Scan capabilities */ 971 __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ 972 973 /* Wireless event capability bitmasks */ 974 __u32 event_capa[6]; 975 976 /* signal level threshold range */ 977 __s32 sensitivity; 978 979 /* Quality of link & SNR stuff */ 980 /* Quality range (link, level, noise) 981 * If the quality is absolute, it will be in the range [0 ; max_qual], 982 * if the quality is dBm, it will be in the range [max_qual ; 0]. 983 * Don't forget that we use 8 bit arithmetics... */ 984 struct iw_quality max_qual; /* Quality of the link */ 985 /* This should contain the average/typical values of the quality 986 * indicator. This should be the threshold between a "good" and 987 * a "bad" link (example : monitor going from green to orange). 988 * Currently, user space apps like quality monitors don't have any 989 * way to calibrate the measurement. With this, they can split 990 * the range between 0 and max_qual in different quality level 991 * (using a geometric subdivision centered on the average). 992 * I expect that people doing the user space apps will feedback 993 * us on which value we need to put in each driver... */ 994 struct iw_quality avg_qual; /* Quality of the link */ 995 996 /* Rates */ 997 __u8 num_bitrates; /* Number of entries in the list */ 998 __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ 999 1000 /* RTS threshold */ 1001 __s32 min_rts; /* Minimal RTS threshold */ 1002 __s32 max_rts; /* Maximal RTS threshold */ 1003 1004 /* Frag threshold */ 1005 __s32 min_frag; /* Minimal frag threshold */ 1006 __s32 max_frag; /* Maximal frag threshold */ 1007 1008 /* Power Management duration & timeout */ 1009 __s32 min_pmp; /* Minimal PM period */ 1010 __s32 max_pmp; /* Maximal PM period */ 1011 __s32 min_pmt; /* Minimal PM timeout */ 1012 __s32 max_pmt; /* Maximal PM timeout */ 1013 __u16 pmp_flags; /* How to decode max/min PM period */ 1014 __u16 pmt_flags; /* How to decode max/min PM timeout */ 1015 __u16 pm_capa; /* What PM options are supported */ 1016 1017 /* Encoder stuff */ 1018 __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ 1019 __u8 num_encoding_sizes; /* Number of entry in the list */ 1020 __u8 max_encoding_tokens; /* Max number of tokens */ 1021 /* For drivers that need a "login/passwd" form */ 1022 __u8 encoding_login_index; /* token index for login token */ 1023 1024 /* Transmit power */ 1025 __u16 txpower_capa; /* What options are supported */ 1026 __u8 num_txpower; /* Number of entries in the list */ 1027 __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ 1028 1029 /* Wireless Extension version info */ 1030 __u8 we_version_compiled; /* Must be WIRELESS_EXT */ 1031 __u8 we_version_source; /* Last update of source */ 1032 1033 /* Retry limits and lifetime */ 1034 __u16 retry_capa; /* What retry options are supported */ 1035 __u16 retry_flags; /* How to decode max/min retry limit */ 1036 __u16 r_time_flags; /* How to decode max/min retry life */ 1037 __s32 min_retry; /* Minimal number of retries */ 1038 __s32 max_retry; /* Maximal number of retries */ 1039 __s32 min_r_time; /* Minimal retry lifetime */ 1040 __s32 max_r_time; /* Maximal retry lifetime */ 1041 1042 /* Frequency */ 1043 __u16 num_channels; /* Number of channels [0; num - 1] */ 1044 __u8 num_frequency; /* Number of entry in the list */ 1045 struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ 1046 /* Note : this frequency list doesn't need to fit channel numbers, 1047 * because each entry contain its channel index */ 1048 1049 __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ 1050 }; 1051 1052 /* 1053 * Private ioctl interface information 1054 */ 1055 1056 struct iw_priv_args { 1057 __u32 cmd; /* Number of the ioctl to issue */ 1058 __u16 set_args; /* Type and number of args */ 1059 __u16 get_args; /* Type and number of args */ 1060 char name[IFNAMSIZ]; /* Name of the extension */ 1061 }; 1062 1063 /* ----------------------- WIRELESS EVENTS ----------------------- */ 1064 /* 1065 * Wireless events are carried through the rtnetlink socket to user 1066 * space. They are encapsulated in the IFLA_WIRELESS field of 1067 * a RTM_NEWLINK message. 1068 */ 1069 1070 /* 1071 * A Wireless Event. Contains basically the same data as the ioctl... 1072 */ 1073 struct iw_event { 1074 __u16 len; /* Real length of this stuff */ 1075 __u16 cmd; /* Wireless IOCTL */ 1076 union iwreq_data u; /* IOCTL fixed payload */ 1077 }; 1078 1079 /* Size of the Event prefix (including padding and alignement junk) */ 1080 #define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) 1081 /* Size of the various events */ 1082 #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) 1083 #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) 1084 #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) 1085 #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) 1086 #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) 1087 #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) 1088 1089 /* iw_point events are special. First, the payload (extra data) come at 1090 * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, 1091 * we omit the pointer, so start at an offset. */ 1092 #define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ 1093 (char *) NULL) 1094 #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ 1095 IW_EV_POINT_OFF) 1096 1097 1098 /* Size of the Event prefix when packed in stream */ 1099 #define IW_EV_LCP_PK_LEN (4) 1100 /* Size of the various events when packed in stream */ 1101 #define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) 1102 #define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) 1103 #define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) 1104 #define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) 1105 #define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) 1106 #define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) 1107 #define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) 1108 1109 #endif /* _UAPI_LINUX_WIRELESS_H */ 1110