1 #ifndef __LINUX_NL80211_H 2 #define __LINUX_NL80211_H 3 /* 4 * 802.11 netlink interface public header 5 * 6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> 7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net> 8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> 9 * Copyright 2008 Michael Buesch <m@bues.ch> 10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> 11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> 12 * Copyright 2008 Colin McCabe <colin@cozybit.com> 13 * Copyright 2015-2017 Intel Deutschland GmbH 14 * Copyright (C) 2018-2022 Intel Corporation 15 * 16 * Permission to use, copy, modify, and/or distribute this software for any 17 * purpose with or without fee is hereby granted, provided that the above 18 * copyright notice and this permission notice appear in all copies. 19 * 20 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 21 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 22 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 23 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 24 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 25 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 26 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 27 * 28 */ 29 30 /* 31 * This header file defines the userspace API to the wireless stack. Please 32 * be careful not to break things - i.e. don't move anything around or so 33 * unless you can demonstrate that it breaks neither API nor ABI. 34 * 35 * Additions to the API should be accompanied by actual implementations in 36 * an upstream driver, so that example implementations exist in case there 37 * are ever concerns about the precise semantics of the API or changes are 38 * needed, and to ensure that code for dead (no longer implemented) API 39 * can actually be identified and removed. 40 * Nonetheless, semantics should also be documented carefully in this file. 41 */ 42 43 #include <linux/types.h> 44 45 #define NL80211_GENL_NAME "nl80211" 46 47 #define NL80211_MULTICAST_GROUP_CONFIG "config" 48 #define NL80211_MULTICAST_GROUP_SCAN "scan" 49 #define NL80211_MULTICAST_GROUP_REG "regulatory" 50 #define NL80211_MULTICAST_GROUP_MLME "mlme" 51 #define NL80211_MULTICAST_GROUP_VENDOR "vendor" 52 #define NL80211_MULTICAST_GROUP_NAN "nan" 53 #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" 54 55 #define NL80211_EDMG_BW_CONFIG_MIN 4 56 #define NL80211_EDMG_BW_CONFIG_MAX 15 57 #define NL80211_EDMG_CHANNELS_MIN 1 58 #define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ 59 60 /** 61 * DOC: Station handling 62 * 63 * Stations are added per interface, but a special case exists with VLAN 64 * interfaces. When a station is bound to an AP interface, it may be moved 65 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). 66 * The station is still assumed to belong to the AP interface it was added 67 * to. 68 * 69 * Station handling varies per interface type and depending on the driver's 70 * capabilities. 71 * 72 * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS 73 * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: 74 * - a setup station entry is added, not yet authorized, without any rate 75 * or capability information, this just exists to avoid race conditions 76 * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid 77 * to add rate and capability information to the station and at the same 78 * time mark it authorized. 79 * - %NL80211_TDLS_ENABLE_LINK is then used 80 * - after this, the only valid operation is to remove it by tearing down 81 * the TDLS link (%NL80211_TDLS_DISABLE_LINK) 82 * 83 * TODO: need more info for other interface types 84 */ 85 86 /** 87 * DOC: Frame transmission/registration support 88 * 89 * Frame transmission and registration support exists to allow userspace 90 * management entities such as wpa_supplicant react to management frames 91 * that are not being handled by the kernel. This includes, for example, 92 * certain classes of action frames that cannot be handled in the kernel 93 * for various reasons. 94 * 95 * Frame registration is done on a per-interface basis and registrations 96 * cannot be removed other than by closing the socket. It is possible to 97 * specify a registration filter to register, for example, only for a 98 * certain type of action frame. In particular with action frames, those 99 * that userspace registers for will not be returned as unhandled by the 100 * driver, so that the registered application has to take responsibility 101 * for doing that. 102 * 103 * The type of frame that can be registered for is also dependent on the 104 * driver and interface type. The frame types are advertised in wiphy 105 * attributes so applications know what to expect. 106 * 107 * NOTE: When an interface changes type while registrations are active, 108 * these registrations are ignored until the interface type is 109 * changed again. This means that changing the interface type can 110 * lead to a situation that couldn't otherwise be produced, but 111 * any such registrations will be dormant in the sense that they 112 * will not be serviced, i.e. they will not receive any frames. 113 * 114 * Frame transmission allows userspace to send for example the required 115 * responses to action frames. It is subject to some sanity checking, 116 * but many frames can be transmitted. When a frame was transmitted, its 117 * status is indicated to the sending socket. 118 * 119 * For more technical details, see the corresponding command descriptions 120 * below. 121 */ 122 123 /** 124 * DOC: Virtual interface / concurrency capabilities 125 * 126 * Some devices are able to operate with virtual MACs, they can have 127 * more than one virtual interface. The capability handling for this 128 * is a bit complex though, as there may be a number of restrictions 129 * on the types of concurrency that are supported. 130 * 131 * To start with, each device supports the interface types listed in 132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the 133 * types there no concurrency is implied. 134 * 135 * Once concurrency is desired, more attributes must be observed: 136 * To start with, since some interface types are purely managed in 137 * software, like the AP-VLAN type in mac80211 for example, there's 138 * an additional list of these, they can be added at any time and 139 * are only restricted by some semantic restrictions (e.g. AP-VLAN 140 * cannot be added without a corresponding AP interface). This list 141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. 142 * 143 * Further, the list of supported combinations is exported. This is 144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, 145 * it exports a list of "groups", and at any point in time the 146 * interfaces that are currently active must fall into any one of 147 * the advertised groups. Within each group, there are restrictions 148 * on the number of interfaces of different types that are supported 149 * and also the number of different channels, along with potentially 150 * some other restrictions. See &enum nl80211_if_combination_attrs. 151 * 152 * All together, these attributes define the concurrency of virtual 153 * interfaces that a given device supports. 154 */ 155 156 /** 157 * DOC: packet coalesce support 158 * 159 * In most cases, host that receives IPv4 and IPv6 multicast/broadcast 160 * packets does not do anything with these packets. Therefore the 161 * reception of these unwanted packets causes unnecessary processing 162 * and power consumption. 163 * 164 * Packet coalesce feature helps to reduce number of received interrupts 165 * to host by buffering these packets in firmware/hardware for some 166 * predefined time. Received interrupt will be generated when one of the 167 * following events occur. 168 * a) Expiration of hardware timer whose expiration time is set to maximum 169 * coalescing delay of matching coalesce rule. 170 * b) Coalescing buffer in hardware reaches it's limit. 171 * c) Packet doesn't match any of the configured coalesce rules. 172 * 173 * User needs to configure following parameters for creating a coalesce 174 * rule. 175 * a) Maximum coalescing delay 176 * b) List of packet patterns which needs to be matched 177 * c) Condition for coalescence. pattern 'match' or 'no match' 178 * Multiple such rules can be created. 179 */ 180 181 /** 182 * DOC: WPA/WPA2 EAPOL handshake offload 183 * 184 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers 185 * can indicate they support offloading EAPOL handshakes for WPA/WPA2 186 * preshared key authentication in station mode. In %NL80211_CMD_CONNECT 187 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers 188 * supporting this offload may reject the %NL80211_CMD_CONNECT when no 189 * preshared key material is provided, for example when that driver does 190 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. 191 * 192 * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be 193 * set by drivers indicating offload support of the PTK/GTK EAPOL 194 * handshakes during 802.1X authentication in station mode. In order to 195 * use the offload the %NL80211_CMD_CONNECT should have 196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this 197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is 198 * not present. 199 * 200 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers 201 * can indicate they support offloading EAPOL handshakes for WPA/WPA2 202 * preshared key authentication in AP mode. In %NL80211_CMD_START_AP 203 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers 204 * supporting this offload may reject the %NL80211_CMD_START_AP when no 205 * preshared key material is provided, for example when that driver does 206 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. 207 * 208 * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK 209 * using %NL80211_CMD_SET_PMK. For offloaded FT support also 210 * %NL80211_ATTR_PMKR0_NAME must be provided. 211 */ 212 213 /** 214 * DOC: FILS shared key authentication offload 215 * 216 * FILS shared key authentication offload can be advertized by drivers by 217 * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support 218 * FILS shared key authentication offload should be able to construct the 219 * authentication and association frames for FILS shared key authentication and 220 * eventually do a key derivation as per IEEE 802.11ai. The below additional 221 * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in 222 * %NL80211_CMD_UPDATE_CONNECT_PARAMS. 223 * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai 224 * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai 225 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message 226 * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK 227 * rIK should be used to generate an authentication tag on the ERP message and 228 * rMSK should be used to derive a PMKSA. 229 * rIK, rMSK should be generated and keyname_nai, sequence number should be used 230 * as specified in IETF RFC 6696. 231 * 232 * When FILS shared key authentication is completed, driver needs to provide the 233 * below additional parameters to userspace, which can be either after setting 234 * up a connection or after roaming. 235 * %NL80211_ATTR_FILS_KEK - used for key renewal 236 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges 237 * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated 238 * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace 239 * The PMKSA can be maintained in userspace persistently so that it can be used 240 * later after reboots or wifi turn off/on also. 241 * 242 * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS 243 * capable AP supporting PMK caching. It specifies the scope within which the 244 * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and 245 * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based 246 * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with 247 * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to 248 * use in a FILS shared key connection with PMKSA caching. 249 */ 250 251 /** 252 * DOC: SAE authentication offload 253 * 254 * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they 255 * support offloading SAE authentication for WPA3-Personal networks in station 256 * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by 257 * drivers indicating the offload support in AP mode. 258 * 259 * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in 260 * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode 261 * respectively. 262 */ 263 264 /** 265 * DOC: VLAN offload support for setting group keys and binding STAs to VLANs 266 * 267 * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they 268 * support offloading VLAN functionality in a manner where the driver exposes a 269 * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs 270 * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet 271 * case. Frames received from stations that are not assigned to any VLAN are 272 * delivered on the main netdev and frames to such stations can be sent through 273 * that main netdev. 274 * 275 * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and 276 * %NL80211_CMD_SET_STATION will optionally specify vlan_id using 277 * %NL80211_ATTR_VLAN_ID. 278 */ 279 280 /** 281 * DOC: TID configuration 282 * 283 * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG 284 * attribute given in wiphy capabilities. 285 * 286 * The necessary configuration parameters are mentioned in 287 * &enum nl80211_tid_config_attr and it will be passed to the 288 * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. 289 * 290 * If the configuration needs to be applied for specific peer then the MAC 291 * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the 292 * configuration will be applied for all the connected peers in the vif except 293 * any peers that have peer specific configuration for the TID by default; if 294 * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values 295 * will be overwritten. 296 * 297 * All this configuration is valid only for STA's current connection 298 * i.e. the configuration will be reset to default when the STA connects back 299 * after disconnection/roaming, and this configuration will be cleared when 300 * the interface goes down. 301 */ 302 303 /** 304 * DOC: FILS shared key crypto offload 305 * 306 * This feature is applicable to drivers running in AP mode. 307 * 308 * FILS shared key crypto offload can be advertised by drivers by setting 309 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support 310 * FILS shared key crypto offload should be able to encrypt and decrypt 311 * association frames for FILS shared key authentication as per IEEE 802.11ai. 312 * With this capability, for FILS key derivation, drivers depend on userspace. 313 * 314 * After FILS key derivation, userspace shares the FILS AAD details with the 315 * driver and the driver stores the same to use in decryption of association 316 * request and in encryption of association response. The below parameters 317 * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. 318 * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA 319 * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption 320 * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption 321 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) 322 * 323 * Once the association is done, the driver cleans the FILS AAD data. 324 */ 325 326 /** 327 * enum nl80211_commands - supported nl80211 commands 328 * 329 * @NL80211_CMD_UNSPEC: unspecified command to catch errors 330 * 331 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request 332 * to get a list of all present wiphys. 333 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or 334 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, 335 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, 336 * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the 337 * channel width; this is used for setting monitor mode channel), 338 * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, 339 * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or 340 * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, 341 * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward 342 * compatibility only. 343 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request 344 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and 345 * %NL80211_ATTR_WIPHY_NAME. 346 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes 347 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. 348 * 349 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; 350 * either a dump request for all interfaces or a specific get with a 351 * single %NL80211_ATTR_IFINDEX is supported. 352 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires 353 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. 354 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response 355 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, 356 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also 357 * be sent from userspace to request creation of a new virtual interface, 358 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and 359 * %NL80211_ATTR_IFNAME. 360 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes 361 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from 362 * userspace to request deletion of a virtual interface, then requires 363 * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are 364 * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, 365 * and if this command is used for the transmitting interface, then all 366 * the non-transmitting interfaces are deleted as well. 367 * 368 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified 369 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. 370 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, 371 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. 372 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, 373 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, 374 * and %NL80211_ATTR_KEY_SEQ attributes. 375 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX 376 * or %NL80211_ATTR_MAC. 377 * 378 * @NL80211_CMD_GET_BEACON: (not used) 379 * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface 380 * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL 381 * attributes. For drivers that generate the beacon and probe responses 382 * internally, the following attributes must be provided: %NL80211_ATTR_IE, 383 * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. 384 * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters 385 * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that 386 * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, 387 * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, 388 * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, 389 * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, 390 * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, 391 * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, 392 * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. 393 * The channel to use can be set on the interface or be given using the 394 * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the 395 * attributes determining channel width. 396 * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP 397 * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface 398 * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP 399 * 400 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by 401 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 402 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by 403 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 404 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the 405 * interface identified by %NL80211_ATTR_IFINDEX. 406 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC 407 * or, if no MAC address given, all stations, on the interface identified 408 * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and 409 * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type 410 * of disconnection indication should be sent to the station 411 * (Deauthentication or Disassociation frame and reason code for that 412 * frame). 413 * 414 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to 415 * destination %NL80211_ATTR_MAC on the interface identified by 416 * %NL80211_ATTR_IFINDEX. 417 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to 418 * destination %NL80211_ATTR_MAC on the interface identified by 419 * %NL80211_ATTR_IFINDEX. 420 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by 421 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. 422 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by 423 * %NL80211_ATTR_MAC. 424 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the 425 * interface identified by %NL80211_ATTR_IFINDEX. 426 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC 427 * or, if no MAC address given, all mesh paths, on the interface identified 428 * by %NL80211_ATTR_IFINDEX. 429 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by 430 * %NL80211_ATTR_IFINDEX. 431 * 432 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set 433 * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device 434 * has a private regulatory domain, it will be returned. Otherwise, the 435 * global regdomain will be returned. 436 * A device will have a private regulatory domain if it uses the 437 * regulatory_hint() API. Even when a private regdomain is used the channel 438 * information will still be mended according to further hints from 439 * the regulatory core to help with compliance. A dump version of this API 440 * is now available which will returns the global regdomain as well as 441 * all private regdomains of present wiphys (for those that have it). 442 * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then 443 * its private regdomain is the only valid one for it. The regulatory 444 * core is not used to help with compliance in this case. 445 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command 446 * after being queried by the kernel. CRDA replies by sending a regulatory 447 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our 448 * current alpha2 if it found a match. It also provides 449 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each 450 * regulatory rule is a nested set of attributes given by 451 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and 452 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by 453 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and 454 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. 455 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain 456 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will 457 * store this as a valid request and then query userspace for it. 458 * 459 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the 460 * interface identified by %NL80211_ATTR_IFINDEX 461 * 462 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the 463 * interface identified by %NL80211_ATTR_IFINDEX 464 * 465 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The 466 * interface is identified with %NL80211_ATTR_IFINDEX and the management 467 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be 468 * added to the end of the specified management frame is specified with 469 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be 470 * added to all specified management frames generated by 471 * kernel/firmware/driver. 472 * Note: This command has been removed and it is only reserved at this 473 * point to avoid re-using existing command number. The functionality this 474 * command was planned for has been provided with cleaner design with the 475 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, 476 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, 477 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. 478 * 479 * @NL80211_CMD_GET_SCAN: get scan results 480 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters 481 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 482 * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to 483 * specify a BSSID to scan for; if not included, the wildcard BSSID will 484 * be used. 485 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to 486 * NL80211_CMD_GET_SCAN and on the "scan" multicast group) 487 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, 488 * partial scan results may be available 489 * 490 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain 491 * intervals and certain number of cycles, as specified by 492 * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is 493 * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, 494 * scheduled scan will run in an infinite loop with the specified interval. 495 * These attributes are mutually exculsive, 496 * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if 497 * NL80211_ATTR_SCHED_SCAN_PLANS is defined. 498 * If for some reason scheduled scan is aborted by the driver, all scan 499 * plans are canceled (including scan plans that did not start yet). 500 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) 501 * are passed, they are used in the probe requests. For 502 * broadcast, a broadcast SSID must be passed (ie. an empty 503 * string). If no SSID is passed, no probe requests are sent and 504 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, 505 * if passed, define which channels should be scanned; if not 506 * passed, all channels allowed for the current regulatory domain 507 * are used. Extra IEs can also be passed from the userspace by 508 * using the %NL80211_ATTR_IE attribute. The first cycle of the 509 * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY 510 * is supplied. If the device supports multiple concurrent scheduled 511 * scans, it will allow such when the caller provides the flag attribute 512 * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. 513 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if 514 * scheduled scan is not running. The caller may assume that as soon 515 * as the call returns, it is safe to start a new scheduled scan again. 516 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan 517 * results available. 518 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has 519 * stopped. The driver may issue this event at any time during a 520 * scheduled scan. One reason for stopping the scan is if the hardware 521 * does not support starting an association or a normal scan while running 522 * a scheduled scan. This event is also sent when the 523 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface 524 * is brought down while a scheduled scan was running. 525 * 526 * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation 527 * or noise level 528 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to 529 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) 530 * 531 * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC 532 * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK 533 * (PMK is used for PTKSA derivation in case of FILS shared key offload) or 534 * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, 535 * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS 536 * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier 537 * advertized by a FILS capable AP identifying the scope of PMKSA in an 538 * ESS. 539 * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC 540 * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, 541 * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS 542 * authentication. 543 * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. 544 * 545 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain 546 * has been changed and provides details of the request information 547 * that caused the change such as who initiated the regulatory request 548 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx 549 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if 550 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or 551 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain 552 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is 553 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on 554 * to (%NL80211_ATTR_REG_ALPHA2). 555 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon 556 * has been found while world roaming thus enabling active scan or 557 * any mode of operation that initiates TX (beacons) on a channel 558 * where we would not have been able to do either before. As an example 559 * if you are world roaming (regulatory domain set to world or if your 560 * driver is using a custom world roaming regulatory domain) and while 561 * doing a passive scan on the 5 GHz band you find an AP there (if not 562 * on a DFS channel) you will now be able to actively scan for that AP 563 * or use AP mode on your card on that same channel. Note that this will 564 * never be used for channels 1-11 on the 2 GHz band as they are always 565 * enabled world wide. This beacon hint is only sent if your device had 566 * either disabled active scanning or beaconing on a channel. We send to 567 * userspace the wiphy on which we removed a restriction from 568 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred 569 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) 570 * the beacon hint was processed. 571 * 572 * @NL80211_CMD_AUTHENTICATE: authentication request and notification. 573 * This command is used both as a command (request to authenticate) and 574 * as an event on the "mlme" multicast group indicating completion of the 575 * authentication process. 576 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the 577 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and 578 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify 579 * the SSID (mainly for association, but is included in authentication 580 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + 581 * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the 582 * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the 583 * authentication type. %NL80211_ATTR_IE is used to define IEs 584 * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added 585 * to the frame. 586 * When used as an event, this reports reception of an Authentication 587 * frame in station and IBSS modes when the local MLME processed the 588 * frame, i.e., it was for the local STA and was received in correct 589 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the 590 * MLME SAP interface (kernel providing MLME, userspace SME). The 591 * included %NL80211_ATTR_FRAME attribute contains the management frame 592 * (including both the header and frame body, but not FCS). This event is 593 * also used to indicate if the authentication attempt timed out. In that 594 * case the %NL80211_ATTR_FRAME attribute is replaced with a 595 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which 596 * pending authentication timed out). 597 * @NL80211_CMD_ASSOCIATE: association request and notification; like 598 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation 599 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, 600 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The 601 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the 602 * request is for the initial association to an ESS (that attribute not 603 * included) or for reassociation within the ESS (that attribute is 604 * included). 605 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like 606 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to 607 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication 608 * primitives). 609 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like 610 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to 611 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). 612 * 613 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael 614 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the 615 * event includes %NL80211_ATTR_MAC to describe the source MAC address of 616 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key 617 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and 618 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this 619 * event matches with MLME-MICHAELMICFAILURE.indication() primitive 620 * 621 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a 622 * FREQ attribute (for the initial frequency if no peer can be found) 623 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those 624 * should be fixed rather than automatically determined. Can only be 625 * executed on a network interface that is UP, and fixed BSSID/FREQ 626 * may be rejected. Another optional parameter is the beacon interval, 627 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not 628 * given defaults to 100 TU (102.4ms). 629 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is 630 * determined by the network interface. 631 * 632 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute 633 * to identify the device, and the TESTDATA blob attribute to pass through 634 * to the driver. 635 * 636 * @NL80211_CMD_CONNECT: connection request and notification; this command 637 * requests to connect to a specified network but without separating 638 * auth and assoc steps. For this, you need to specify the SSID in a 639 * %NL80211_ATTR_SSID attribute, and can optionally specify the association 640 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, 641 * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, 642 * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, 643 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 644 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 645 * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and 646 * %NL80211_ATTR_WIPHY_FREQ_HINT. 647 * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are 648 * restrictions on BSS selection, i.e., they effectively prevent roaming 649 * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT 650 * can be included to provide a recommendation of the initial BSS while 651 * allowing the driver to roam to other BSSes within the ESS and also to 652 * ignore this recommendation if the indicated BSS is not ideal. Only one 653 * set of BSSID,frequency parameters is used (i.e., either the enforcing 654 * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict 655 * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). 656 * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if 657 * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is 658 * included, these IEs through %NL80211_ATTR_IE are specified by the user 659 * space based on the best possible BSS selected. Thus, if the driver ends 660 * up selecting a different BSS, it can modify these IEs accordingly (e.g. 661 * userspace asks the driver to perform PMKSA caching with BSS1 and the 662 * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE 663 * has to get updated with the apt PMKID). 664 * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within 665 * the ESS in case the device is already associated and an association with 666 * a different BSS is desired. 667 * Background scan period can optionally be 668 * specified in %NL80211_ATTR_BG_SCAN_PERIOD, 669 * if not specified default background scan configuration 670 * in driver is used and if period value is 0, bg scan will be disabled. 671 * This attribute is ignored if driver does not support roam scan. 672 * It is also sent as an event, with the BSSID and response IEs when the 673 * connection is established or failed to be established. This can be 674 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, 675 * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the 676 * event, the connection attempt failed due to not being able to initiate 677 * authentication/association or not receiving a response from the AP. 678 * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as 679 * well to remain backwards compatible. 680 * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. 681 * When a security association was established on an 802.1X network using 682 * fast transition, this event should be followed by an 683 * %NL80211_CMD_PORT_AUTHORIZED event. 684 * Following a %NL80211_CMD_ROAM event userspace can issue 685 * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the 686 * new BSS the card/driver roamed to. 687 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify 688 * userspace that a connection was dropped by the AP or due to other 689 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and 690 * %NL80211_ATTR_REASON_CODE attributes are used. 691 * 692 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices 693 * associated with this wiphy must be down and will follow. 694 * 695 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified 696 * channel for the specified amount of time. This can be used to do 697 * off-channel operations like transmit a Public Action frame and wait for 698 * a response while being associated to an AP on another channel. 699 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus 700 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the 701 * frequency for the operation. 702 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds 703 * to remain on the channel. This command is also used as an event to 704 * notify when the requested duration starts (it may take a while for the 705 * driver to schedule this time due to other concurrent needs for the 706 * radio). 707 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) 708 * that will be included with any events pertaining to this request; 709 * the cookie is also used to cancel the request. 710 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a 711 * pending remain-on-channel duration if the desired operation has been 712 * completed prior to expiration of the originally requested duration. 713 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the 714 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to 715 * uniquely identify the request. 716 * This command is also used as an event to notify when a requested 717 * remain-on-channel duration has expired. 718 * 719 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX 720 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface 721 * and @NL80211_ATTR_TX_RATES the set of allowed rates. 722 * 723 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames 724 * (via @NL80211_CMD_FRAME) for processing in userspace. This command 725 * requires an interface index, a frame type attribute (optional for 726 * backward compatibility reasons, if not given assumes action frames) 727 * and a match attribute containing the first few bytes of the frame 728 * that should match, e.g. a single byte for only a category match or 729 * four bytes for vendor frames including the OUI. The registration 730 * cannot be dropped, but is removed automatically when the netlink 731 * socket is closed. Multiple registrations can be made. 732 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if 733 * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which 734 * case the registration can also be modified to include/exclude the 735 * flag, rather than requiring unregistration to change it. 736 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for 737 * backward compatibility 738 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This 739 * command is used both as a request to transmit a management frame and 740 * as an event indicating reception of a frame that was not processed in 741 * kernel code, but is for us (i.e., which may need to be processed in a 742 * user space application). %NL80211_ATTR_FRAME is used to specify the 743 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used 744 * to indicate on which channel the frame is to be transmitted or was 745 * received. If this channel is not the current channel (remain-on-channel 746 * or the operational channel) the device will switch to the given channel 747 * and transmit the frame, optionally waiting for a response for the time 748 * specified using %NL80211_ATTR_DURATION. When called, this operation 749 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the 750 * TX status event pertaining to the TX request. 751 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 752 * management frames at CCK rate or not in 2GHz band. 753 * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA 754 * counters which will be updated to the current value. This attribute 755 * is used during CSA period. 756 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this 757 * command may be used with the corresponding cookie to cancel the wait 758 * time if it is known that it is no longer necessary. This command is 759 * also sent as an event whenever the driver has completed the off-channel 760 * wait time. 761 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. 762 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame 763 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies 764 * the TX command and %NL80211_ATTR_FRAME includes the contents of the 765 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged 766 * the frame. 767 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for 768 * backward compatibility. 769 * 770 * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE 771 * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE 772 * 773 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command 774 * is used to configure connection quality monitoring notification trigger 775 * levels. 776 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This 777 * command is used as an event to indicate the that a trigger level was 778 * reached. 779 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ 780 * and the attributes determining channel width) the given interface 781 * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. 782 * In case multiple channels are supported by the device, the mechanism 783 * with which it switches channels is implementation-defined. 784 * When a monitor interface is given, it can only switch channel while 785 * no other interfaces are operating to avoid disturbing the operation 786 * of any other interfaces, and other interfaces will again take 787 * precedence when they are used. 788 * 789 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface 790 * (no longer supported). 791 * 792 * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform 793 * multicast to unicast conversion. When enabled, all multicast packets 794 * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) 795 * will be sent out to each station once with the destination (multicast) 796 * MAC address replaced by the station's MAC address. Note that this may 797 * break certain expectations of the receiver, e.g. the ability to drop 798 * unicast IP packets encapsulated in multicast L2 frames, or the ability 799 * to not send destination unreachable messages in such cases. 800 * This can only be toggled per BSS. Configure this on an interface of 801 * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces 802 * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. 803 * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this 804 * command, the feature is disabled. 805 * 806 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial 807 * mesh config parameters may be given. 808 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the 809 * network is determined by the network interface. 810 * 811 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame 812 * notification. This event is used to indicate that an unprotected 813 * deauthentication frame was dropped when MFP is in use. 814 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame 815 * notification. This event is used to indicate that an unprotected 816 * disassociation frame was dropped when MFP is in use. 817 * 818 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a 819 * beacon or probe response from a compatible mesh peer. This is only 820 * sent while no station information (sta_info) exists for the new peer 821 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, 822 * @NL80211_MESH_SETUP_USERSPACE_AMPE, or 823 * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this 824 * notification, userspace may decide to create a new station 825 * (@NL80211_CMD_NEW_STATION). To stop this notification from 826 * reoccurring, the userspace authentication daemon may want to create the 827 * new station with the AUTHENTICATED flag unset and maybe change it later 828 * depending on the authentication result. 829 * 830 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. 831 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. 832 * Since wireless is more complex than wired ethernet, it supports 833 * various triggers. These triggers can be configured through this 834 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For 835 * more background information, see 836 * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. 837 * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification 838 * from the driver reporting the wakeup reason. In this case, the 839 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason 840 * for the wakeup, if it was caused by wireless. If it is not present 841 * in the wakeup notification, the wireless device didn't cause the 842 * wakeup but reports that it was woken up. 843 * 844 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver 845 * the necessary information for supporting GTK rekey offload. This 846 * feature is typically used during WoWLAN. The configuration data 847 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and 848 * contains the data in sub-attributes). After rekeying happened, 849 * this command may also be sent by the driver as an MLME event to 850 * inform userspace of the new replay counter. 851 * 852 * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace 853 * of PMKSA caching dandidates. 854 * 855 * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). 856 * In addition, this can be used as an event to request userspace to take 857 * actions on TDLS links (set up a new link or tear down an existing one). 858 * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested 859 * operation, %NL80211_ATTR_MAC contains the peer MAC address, and 860 * %NL80211_ATTR_REASON_CODE the reason code to be used (only with 861 * %NL80211_TDLS_TEARDOWN). 862 * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The 863 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be 864 * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as 865 * 802.11 management frames, while TDLS action codes (802.11-2012 866 * 8.5.13.1) will be encapsulated and sent as data frames. The currently 867 * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES 868 * and the currently supported TDLS actions codes are given in 869 * &enum ieee80211_tdls_actioncode. 870 * 871 * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP 872 * (or GO) interface (i.e. hostapd) to ask for unexpected frames to 873 * implement sending deauth to stations that send unexpected class 3 874 * frames. Also used as the event sent by the kernel when such a frame 875 * is received. 876 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and 877 * other attributes like the interface index are present. 878 * If used as the command it must have an interface index and you can 879 * only unsubscribe from the event by closing the socket. Subscription 880 * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. 881 * 882 * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the 883 * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame 884 * and wasn't already in a 4-addr VLAN. The event will be sent similarly 885 * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. 886 * 887 * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface 888 * by sending a null data frame to it and reporting when the frame is 889 * acknowleged. This is used to allow timing out inactive clients. Uses 890 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a 891 * direct reply with an %NL80211_ATTR_COOKIE that is later used to match 892 * up the event with the request. The event includes the same data and 893 * has %NL80211_ATTR_ACK set if the frame was ACKed. 894 * 895 * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from 896 * other BSSes when any interfaces are in AP mode. This helps implement 897 * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME 898 * messages. Note that per PHY only one application may register. 899 * 900 * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether 901 * No Acknowledgement Policy should be applied. 902 * 903 * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels 904 * independently of the userspace SME, send this event indicating 905 * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the 906 * attributes determining channel width. This indication may also be 907 * sent when a remotely-initiated switch (e.g., when a STA receives a CSA 908 * from the remote AP) is completed; 909 * 910 * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch 911 * has been started on an interface, regardless of the initiator 912 * (ie. whether it was requested from a remote device or 913 * initiated on our own). It indicates that 914 * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ 915 * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may 916 * decide to react to this indication by requesting other 917 * interfaces to change channel as well. 918 * 919 * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by 920 * its %NL80211_ATTR_WDEV identifier. It must have been created with 921 * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the 922 * P2P Device can be used for P2P operations, e.g. remain-on-channel and 923 * public action frame TX. 924 * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by 925 * its %NL80211_ATTR_WDEV identifier. 926 * 927 * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to 928 * notify userspace that AP has rejected the connection request from a 929 * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON 930 * is used for this. 931 * 932 * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames 933 * for IBSS or MESH vif. 934 * 935 * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. 936 * This is to be used with the drivers advertising the support of MAC 937 * address based access control. List of MAC addresses is passed in 938 * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in 939 * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it 940 * is not already done. The new list will replace any existing list. Driver 941 * will clear its ACL when the list of MAC addresses passed is empty. This 942 * command is used in AP/P2P GO mode. Driver has to make sure to clear its 943 * ACL list during %NL80211_CMD_STOP_AP. 944 * 945 * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once 946 * a radar is detected or the channel availability scan (CAC) has finished 947 * or was aborted, or a radar was detected, usermode will be notified with 948 * this event. This command is also used to notify userspace about radars 949 * while operating on this channel. 950 * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the 951 * event. 952 * 953 * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, 954 * i.e. features for the nl80211 protocol rather than device features. 955 * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. 956 * 957 * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition 958 * Information Element to the WLAN driver 959 * 960 * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver 961 * to the supplicant. This will carry the target AP's MAC address along 962 * with the relevant Information Elements. This event is used to report 963 * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). 964 * 965 * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running 966 * a critical protocol that needs more reliability in the connection to 967 * complete. 968 * 969 * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can 970 * return back to normal. 971 * 972 * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. 973 * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. 974 * 975 * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the 976 * new channel information (Channel Switch Announcement - CSA) 977 * in the beacon for some time (as defined in the 978 * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the 979 * new channel. Userspace provides the new channel information (using 980 * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel 981 * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform 982 * other station that transmission must be blocked until the channel 983 * switch is complete. 984 * 985 * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified 986 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in 987 * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in 988 * %NL80211_ATTR_VENDOR_DATA. 989 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is 990 * used in the wiphy data as a nested attribute containing descriptions 991 * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. 992 * This may also be sent as an event with the same attributes. 993 * 994 * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. 995 * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If 996 * that attribute is not included, QoS mapping is disabled. Since this 997 * QoS mapping is relevant for IP packets, it is only valid during an 998 * association. This is cleared on disassociation and AP restart. 999 * 1000 * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given 1001 * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO 1002 * and %NL80211_ATTR_ADMITTED_TIME parameters. 1003 * Note that the action frame handshake with the AP shall be handled by 1004 * userspace via the normal management RX/TX framework, this only sets 1005 * up the TX TS in the driver/device. 1006 * If the admitted time attribute is not added then the request just checks 1007 * if a subsequent setup could be successful, the intent is to use this to 1008 * avoid setting up a session with the AP when local restrictions would 1009 * make that impossible. However, the subsequent "real" setup may still 1010 * fail even if the check was successful. 1011 * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID 1012 * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this 1013 * before removing a station entry entirely, or before disassociating 1014 * or similar, cleanup will happen in the driver/device in this case. 1015 * 1016 * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to 1017 * destination %NL80211_ATTR_MAC on the interface identified by 1018 * %NL80211_ATTR_IFINDEX. 1019 * 1020 * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and 1021 * bandwidth of a channel must be given. 1022 * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the 1023 * network is determined by the network interface. 1024 * 1025 * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, 1026 * identified by the %NL80211_ATTR_MAC parameter. A target channel is 1027 * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining 1028 * channel width/type. The target operating class is given via 1029 * %NL80211_ATTR_OPER_CLASS. 1030 * The driver is responsible for continually initiating channel-switching 1031 * operations and returning to the base channel for communication with the 1032 * AP. 1033 * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS 1034 * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel 1035 * when this command completes. 1036 * 1037 * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used 1038 * as an event to indicate changes for devices with wiphy-specific regdom 1039 * management. 1040 * 1041 * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is 1042 * not running. The driver indicates the status of the scan through 1043 * cfg80211_scan_done(). 1044 * 1045 * @NL80211_CMD_START_NAN: Start NAN operation, identified by its 1046 * %NL80211_ATTR_WDEV interface. This interface must have been 1047 * previously created with %NL80211_CMD_NEW_INTERFACE. After it 1048 * has been started, the NAN interface will create or join a 1049 * cluster. This command must have a valid 1050 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional 1051 * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is 1052 * omitted or set to 0, it means don't-care and the device will 1053 * decide what to use. After this command NAN functions can be 1054 * added. 1055 * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by 1056 * its %NL80211_ATTR_WDEV interface. 1057 * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined 1058 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this 1059 * operation returns the strictly positive and unique instance id 1060 * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) 1061 * of the function upon success. 1062 * Since instance ID's can be re-used, this cookie is the right 1063 * way to identify the function. This will avoid races when a termination 1064 * event is handled by the user space after it has already added a new 1065 * function that got the same instance id from the kernel as the one 1066 * which just terminated. 1067 * This cookie may be used in NAN events even before the command 1068 * returns, so userspace shouldn't process NAN events until it processes 1069 * the response to this command. 1070 * Look at %NL80211_ATTR_SOCKET_OWNER as well. 1071 * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. 1072 * This command is also used as a notification sent when a NAN function is 1073 * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID 1074 * and %NL80211_ATTR_COOKIE attributes. 1075 * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN 1076 * configuration. NAN must be operational (%NL80211_CMD_START_NAN 1077 * was executed). It must contain at least one of the following 1078 * attributes: %NL80211_ATTR_NAN_MASTER_PREF, 1079 * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the 1080 * current configuration is not changed. If it is present but 1081 * set to zero, the configuration is changed to don't-care 1082 * (i.e. the device can decide what to do). 1083 * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. 1084 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and 1085 * %NL80211_ATTR_COOKIE. 1086 * 1087 * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters 1088 * for subsequent roaming cases if the driver or firmware uses internal 1089 * BSS selection. This command can be issued only while connected and it 1090 * does not result in a change for the current association. Currently, 1091 * only the %NL80211_ATTR_IE data is used and updated with this command. 1092 * 1093 * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 1094 * for the given authenticator address (specified with %NL80211_ATTR_MAC). 1095 * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the 1096 * PMK-R0, otherwise it specifies the PMK. 1097 * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously 1098 * configured PMK for the authenticator address identified by 1099 * %NL80211_ATTR_MAC. 1100 * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was 1101 * completed successfully. Drivers that support 4 way handshake offload 1102 * should send this event after indicating 802.1X FT assocation with 1103 * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT 1104 * should be indicated instead. 1105 * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request 1106 * and RX notification. This command is used both as a request to transmit 1107 * a control port frame and as a notification that a control port frame 1108 * has been received. %NL80211_ATTR_FRAME is used to specify the 1109 * frame contents. The frame is the raw EAPoL data, without ethernet or 1110 * 802.11 headers. 1111 * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 1112 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added 1113 * indicating the protocol type of the received frame; whether the frame 1114 * was received unencrypted and the MAC address of the peer respectively. 1115 * 1116 * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. 1117 * 1118 * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host 1119 * drivers that do not define separate commands for authentication and 1120 * association, but rely on user space for the authentication to happen. 1121 * This interface acts both as the event request (driver to user space) 1122 * to trigger the authentication and command response (userspace to 1123 * driver) to indicate the authentication status. 1124 * 1125 * User space uses the %NL80211_CMD_CONNECT command to the host driver to 1126 * trigger a connection. The host driver selects a BSS and further uses 1127 * this interface to offload only the authentication part to the user 1128 * space. Authentication frames are passed between the driver and user 1129 * space through the %NL80211_CMD_FRAME interface. Host driver proceeds 1130 * further with the association after getting successful authentication 1131 * status. User space indicates the authentication status through 1132 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH 1133 * command interface. 1134 * 1135 * Host driver reports this status on an authentication failure to the 1136 * user space through the connect result as the user space would have 1137 * initiated the connection through the connect request. 1138 * 1139 * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's 1140 * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, 1141 * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its 1142 * address(specified in %NL80211_ATTR_MAC). 1143 * 1144 * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in 1145 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. 1146 * 1147 * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) 1148 * with the given parameters, which are encapsulated in the nested 1149 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address 1150 * randomization may be enabled and configured by specifying the 1151 * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. 1152 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. 1153 * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in 1154 * the netlink extended ack message. 1155 * 1156 * To cancel a measurement, close the socket that requested it. 1157 * 1158 * Measurement results are reported to the socket that requested the 1159 * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they 1160 * become available, so applications must ensure a large enough socket 1161 * buffer size. 1162 * 1163 * Depending on driver support it may or may not be possible to start 1164 * multiple concurrent measurements. 1165 * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the 1166 * result notification from the driver to the requesting socket. 1167 * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that 1168 * the measurement completed, using the measurement cookie 1169 * (%NL80211_ATTR_COOKIE). 1170 * 1171 * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was 1172 * detected and reported by a neighboring device on the channel 1173 * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes 1174 * determining the width and type. 1175 * 1176 * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to 1177 * offload OWE processing to user space. This intends to support 1178 * OWE AKM by the host drivers that implement SME but rely 1179 * on the user space for the cryptographic/DH IE processing in AP mode. 1180 * 1181 * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric 1182 * refreshing, is that from one mesh point we be able to send some data 1183 * frames to other mesh points which are not currently selected as a 1184 * primary traffic path, but which are only 1 hop away. The absence of 1185 * the primary path to the chosen node makes it necessary to apply some 1186 * form of marking on a chosen packet stream so that the packets can be 1187 * properly steered to the selected node for testing, and not by the 1188 * regular mesh path lookup. Further, the packets must be of type data 1189 * so that the rate control (often embedded in firmware) is used for 1190 * rate selection. 1191 * 1192 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh 1193 * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame 1194 * content. The frame is ethernet data. 1195 * 1196 * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration 1197 * is passed using %NL80211_ATTR_TID_CONFIG attribute. 1198 * 1199 * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon 1200 * frame. This event is used to indicate that a received Beacon frame was 1201 * dropped because it did not include a valid MME MIC while beacon 1202 * protection was enabled (BIGTK configured in station mode). 1203 * 1204 * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control 1205 * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. 1206 * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME 1207 * includes the contents of the frame. %NL80211_ATTR_ACK flag is included 1208 * if the recipient acknowledged the frame. 1209 * 1210 * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is 1211 * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to 1212 * specify the wiphy index to be applied to. 1213 * 1214 * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever 1215 * mac80211/drv detects a bss color collision. 1216 * 1217 * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that 1218 * userspace wants to change the BSS color. 1219 * 1220 * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has 1221 * started 1222 * 1223 * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has 1224 * been aborted 1225 * 1226 * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change 1227 * has completed 1228 * 1229 * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - 1230 * &NL80211_ATTR_MAC - for STA MAC address 1231 * &NL80211_ATTR_FILS_KEK - for KEK 1232 * &NL80211_ATTR_FILS_NONCES - for FILS Nonces 1233 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) 1234 * 1235 * @NL80211_CMD_ASSOC_COMEBACK: notification about an association 1236 * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC 1237 * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to 1238 * specify the timeout value. 1239 * 1240 * @NL80211_CMD_MAX: highest used command number 1241 * @__NL80211_CMD_AFTER_LAST: internal use 1242 */ 1243 enum nl80211_commands { 1244 /* don't change the order or add anything between, this is ABI! */ 1245 NL80211_CMD_UNSPEC, 1246 1247 NL80211_CMD_GET_WIPHY, /* can dump */ 1248 NL80211_CMD_SET_WIPHY, 1249 NL80211_CMD_NEW_WIPHY, 1250 NL80211_CMD_DEL_WIPHY, 1251 1252 NL80211_CMD_GET_INTERFACE, /* can dump */ 1253 NL80211_CMD_SET_INTERFACE, 1254 NL80211_CMD_NEW_INTERFACE, 1255 NL80211_CMD_DEL_INTERFACE, 1256 1257 NL80211_CMD_GET_KEY, 1258 NL80211_CMD_SET_KEY, 1259 NL80211_CMD_NEW_KEY, 1260 NL80211_CMD_DEL_KEY, 1261 1262 NL80211_CMD_GET_BEACON, 1263 NL80211_CMD_SET_BEACON, 1264 NL80211_CMD_START_AP, 1265 NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, 1266 NL80211_CMD_STOP_AP, 1267 NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, 1268 1269 NL80211_CMD_GET_STATION, 1270 NL80211_CMD_SET_STATION, 1271 NL80211_CMD_NEW_STATION, 1272 NL80211_CMD_DEL_STATION, 1273 1274 NL80211_CMD_GET_MPATH, 1275 NL80211_CMD_SET_MPATH, 1276 NL80211_CMD_NEW_MPATH, 1277 NL80211_CMD_DEL_MPATH, 1278 1279 NL80211_CMD_SET_BSS, 1280 1281 NL80211_CMD_SET_REG, 1282 NL80211_CMD_REQ_SET_REG, 1283 1284 NL80211_CMD_GET_MESH_CONFIG, 1285 NL80211_CMD_SET_MESH_CONFIG, 1286 1287 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, 1288 1289 NL80211_CMD_GET_REG, 1290 1291 NL80211_CMD_GET_SCAN, 1292 NL80211_CMD_TRIGGER_SCAN, 1293 NL80211_CMD_NEW_SCAN_RESULTS, 1294 NL80211_CMD_SCAN_ABORTED, 1295 1296 NL80211_CMD_REG_CHANGE, 1297 1298 NL80211_CMD_AUTHENTICATE, 1299 NL80211_CMD_ASSOCIATE, 1300 NL80211_CMD_DEAUTHENTICATE, 1301 NL80211_CMD_DISASSOCIATE, 1302 1303 NL80211_CMD_MICHAEL_MIC_FAILURE, 1304 1305 NL80211_CMD_REG_BEACON_HINT, 1306 1307 NL80211_CMD_JOIN_IBSS, 1308 NL80211_CMD_LEAVE_IBSS, 1309 1310 NL80211_CMD_TESTMODE, 1311 1312 NL80211_CMD_CONNECT, 1313 NL80211_CMD_ROAM, 1314 NL80211_CMD_DISCONNECT, 1315 1316 NL80211_CMD_SET_WIPHY_NETNS, 1317 1318 NL80211_CMD_GET_SURVEY, 1319 NL80211_CMD_NEW_SURVEY_RESULTS, 1320 1321 NL80211_CMD_SET_PMKSA, 1322 NL80211_CMD_DEL_PMKSA, 1323 NL80211_CMD_FLUSH_PMKSA, 1324 1325 NL80211_CMD_REMAIN_ON_CHANNEL, 1326 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, 1327 1328 NL80211_CMD_SET_TX_BITRATE_MASK, 1329 1330 NL80211_CMD_REGISTER_FRAME, 1331 NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, 1332 NL80211_CMD_FRAME, 1333 NL80211_CMD_ACTION = NL80211_CMD_FRAME, 1334 NL80211_CMD_FRAME_TX_STATUS, 1335 NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, 1336 1337 NL80211_CMD_SET_POWER_SAVE, 1338 NL80211_CMD_GET_POWER_SAVE, 1339 1340 NL80211_CMD_SET_CQM, 1341 NL80211_CMD_NOTIFY_CQM, 1342 1343 NL80211_CMD_SET_CHANNEL, 1344 NL80211_CMD_SET_WDS_PEER, 1345 1346 NL80211_CMD_FRAME_WAIT_CANCEL, 1347 1348 NL80211_CMD_JOIN_MESH, 1349 NL80211_CMD_LEAVE_MESH, 1350 1351 NL80211_CMD_UNPROT_DEAUTHENTICATE, 1352 NL80211_CMD_UNPROT_DISASSOCIATE, 1353 1354 NL80211_CMD_NEW_PEER_CANDIDATE, 1355 1356 NL80211_CMD_GET_WOWLAN, 1357 NL80211_CMD_SET_WOWLAN, 1358 1359 NL80211_CMD_START_SCHED_SCAN, 1360 NL80211_CMD_STOP_SCHED_SCAN, 1361 NL80211_CMD_SCHED_SCAN_RESULTS, 1362 NL80211_CMD_SCHED_SCAN_STOPPED, 1363 1364 NL80211_CMD_SET_REKEY_OFFLOAD, 1365 1366 NL80211_CMD_PMKSA_CANDIDATE, 1367 1368 NL80211_CMD_TDLS_OPER, 1369 NL80211_CMD_TDLS_MGMT, 1370 1371 NL80211_CMD_UNEXPECTED_FRAME, 1372 1373 NL80211_CMD_PROBE_CLIENT, 1374 1375 NL80211_CMD_REGISTER_BEACONS, 1376 1377 NL80211_CMD_UNEXPECTED_4ADDR_FRAME, 1378 1379 NL80211_CMD_SET_NOACK_MAP, 1380 1381 NL80211_CMD_CH_SWITCH_NOTIFY, 1382 1383 NL80211_CMD_START_P2P_DEVICE, 1384 NL80211_CMD_STOP_P2P_DEVICE, 1385 1386 NL80211_CMD_CONN_FAILED, 1387 1388 NL80211_CMD_SET_MCAST_RATE, 1389 1390 NL80211_CMD_SET_MAC_ACL, 1391 1392 NL80211_CMD_RADAR_DETECT, 1393 1394 NL80211_CMD_GET_PROTOCOL_FEATURES, 1395 1396 NL80211_CMD_UPDATE_FT_IES, 1397 NL80211_CMD_FT_EVENT, 1398 1399 NL80211_CMD_CRIT_PROTOCOL_START, 1400 NL80211_CMD_CRIT_PROTOCOL_STOP, 1401 1402 NL80211_CMD_GET_COALESCE, 1403 NL80211_CMD_SET_COALESCE, 1404 1405 NL80211_CMD_CHANNEL_SWITCH, 1406 1407 NL80211_CMD_VENDOR, 1408 1409 NL80211_CMD_SET_QOS_MAP, 1410 1411 NL80211_CMD_ADD_TX_TS, 1412 NL80211_CMD_DEL_TX_TS, 1413 1414 NL80211_CMD_GET_MPP, 1415 1416 NL80211_CMD_JOIN_OCB, 1417 NL80211_CMD_LEAVE_OCB, 1418 1419 NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, 1420 1421 NL80211_CMD_TDLS_CHANNEL_SWITCH, 1422 NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, 1423 1424 NL80211_CMD_WIPHY_REG_CHANGE, 1425 1426 NL80211_CMD_ABORT_SCAN, 1427 1428 NL80211_CMD_START_NAN, 1429 NL80211_CMD_STOP_NAN, 1430 NL80211_CMD_ADD_NAN_FUNCTION, 1431 NL80211_CMD_DEL_NAN_FUNCTION, 1432 NL80211_CMD_CHANGE_NAN_CONFIG, 1433 NL80211_CMD_NAN_MATCH, 1434 1435 NL80211_CMD_SET_MULTICAST_TO_UNICAST, 1436 1437 NL80211_CMD_UPDATE_CONNECT_PARAMS, 1438 1439 NL80211_CMD_SET_PMK, 1440 NL80211_CMD_DEL_PMK, 1441 1442 NL80211_CMD_PORT_AUTHORIZED, 1443 1444 NL80211_CMD_RELOAD_REGDB, 1445 1446 NL80211_CMD_EXTERNAL_AUTH, 1447 1448 NL80211_CMD_STA_OPMODE_CHANGED, 1449 1450 NL80211_CMD_CONTROL_PORT_FRAME, 1451 1452 NL80211_CMD_GET_FTM_RESPONDER_STATS, 1453 1454 NL80211_CMD_PEER_MEASUREMENT_START, 1455 NL80211_CMD_PEER_MEASUREMENT_RESULT, 1456 NL80211_CMD_PEER_MEASUREMENT_COMPLETE, 1457 1458 NL80211_CMD_NOTIFY_RADAR, 1459 1460 NL80211_CMD_UPDATE_OWE_INFO, 1461 1462 NL80211_CMD_PROBE_MESH_LINK, 1463 1464 NL80211_CMD_SET_TID_CONFIG, 1465 1466 NL80211_CMD_UNPROT_BEACON, 1467 1468 NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, 1469 1470 NL80211_CMD_SET_SAR_SPECS, 1471 1472 NL80211_CMD_OBSS_COLOR_COLLISION, 1473 1474 NL80211_CMD_COLOR_CHANGE_REQUEST, 1475 1476 NL80211_CMD_COLOR_CHANGE_STARTED, 1477 NL80211_CMD_COLOR_CHANGE_ABORTED, 1478 NL80211_CMD_COLOR_CHANGE_COMPLETED, 1479 1480 NL80211_CMD_SET_FILS_AAD, 1481 1482 NL80211_CMD_ASSOC_COMEBACK, 1483 1484 /* add new commands above here */ 1485 1486 /* used to define NL80211_CMD_MAX below */ 1487 __NL80211_CMD_AFTER_LAST, 1488 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 1489 }; 1490 1491 /* 1492 * Allow user space programs to use #ifdef on new commands by defining them 1493 * here 1494 */ 1495 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS 1496 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE 1497 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE 1498 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE 1499 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE 1500 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE 1501 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE 1502 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT 1503 1504 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 1505 1506 /* source-level API compatibility */ 1507 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG 1508 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG 1509 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE 1510 1511 /** 1512 * enum nl80211_attrs - nl80211 netlink attributes 1513 * 1514 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors 1515 * 1516 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. 1517 * /sys/class/ieee80211/<phyname>/index 1518 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) 1519 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters 1520 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, 1521 * defines the channel together with the (deprecated) 1522 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes 1523 * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 1524 * and %NL80211_ATTR_CENTER_FREQ2 1525 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values 1526 * of &enum nl80211_chan_width, describing the channel width. See the 1527 * documentation of the enum for more information. 1528 * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the 1529 * channel, used for anything but 20 MHz bandwidth. In S1G this is the 1530 * operating channel center frequency. 1531 * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the 1532 * channel, used only for 80+80 MHz bandwidth 1533 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ 1534 * if HT20 or HT40 are to be used (i.e., HT disabled if not included): 1535 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including 1536 * this attribute) 1537 * NL80211_CHAN_HT20 = HT20 only 1538 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel 1539 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel 1540 * This attribute is now deprecated. 1541 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is 1542 * less than or equal to the RTS threshold; allowed range: 1..255; 1543 * dot11ShortRetryLimit; u8 1544 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is 1545 * greater than the RTS threshold; allowed range: 1..255; 1546 * dot11ShortLongLimit; u8 1547 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum 1548 * length in octets for frames; allowed range: 256..8000, disable 1549 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 1550 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length 1551 * larger than or equal to this use RTS/CTS handshake); allowed range: 1552 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 1553 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 1554 * section 7.3.2.9; dot11CoverageClass; u8 1555 * 1556 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on 1557 * @NL80211_ATTR_IFNAME: network interface name 1558 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype 1559 * 1560 * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices 1561 * that don't have a netdev (u64) 1562 * 1563 * @NL80211_ATTR_MAC: MAC address (various uses) 1564 * 1565 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of 1566 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 1567 * keys 1568 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) 1569 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 1570 * section 7.3.2.25.1, e.g. 0x000FAC04) 1571 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 1572 * CCMP keys, each six bytes in little endian 1573 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key 1574 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the 1575 * default management key 1576 * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or 1577 * other commands, indicates which pairwise cipher suites are used 1578 * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or 1579 * other commands, indicates which group cipher suite is used 1580 * 1581 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU 1582 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing 1583 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE 1584 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE 1585 * 1586 * @NL80211_ATTR_STA_AID: Association ID for the station (u16) 1587 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of 1588 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) 1589 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by 1590 * IEEE 802.11 7.3.1.6 (u16). 1591 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported 1592 * rates as defined by IEEE 802.11 7.3.2.2 but without the length 1593 * restriction (at most %NL80211_MAX_SUPP_RATES). 1594 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station 1595 * to, or the AP interface the station was originally added to. 1596 * @NL80211_ATTR_STA_INFO: information about a station, part of station info 1597 * given for %NL80211_CMD_GET_STATION, nested attribute containing 1598 * info as possible, see &enum nl80211_sta_info. 1599 * 1600 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, 1601 * consisting of a nested array. 1602 * 1603 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). 1604 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link 1605 * (see &enum nl80211_plink_action). 1606 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. 1607 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path 1608 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at 1609 * &enum nl80211_mpath_info. 1610 * 1611 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of 1612 * &enum nl80211_mntr_flags. 1613 * 1614 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the 1615 * current regulatory domain should be set to or is already set to. 1616 * For example, 'CR', for Costa Rica. This attribute is used by the kernel 1617 * to query the CRDA to retrieve one regulatory domain. This attribute can 1618 * also be used by userspace to query the kernel for the currently set 1619 * regulatory domain. We chose an alpha2 as that is also used by the 1620 * IEEE-802.11 country information element to identify a country. 1621 * Users can also simply ask the wireless core to set regulatory domain 1622 * to a specific alpha2. 1623 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory 1624 * rules. 1625 * 1626 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) 1627 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled 1628 * (u8, 0 or 1) 1629 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled 1630 * (u8, 0 or 1) 1631 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic 1632 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length 1633 * restriction (at most %NL80211_MAX_SUPP_RATES). 1634 * 1635 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from 1636 * association request when used with NL80211_CMD_NEW_STATION) 1637 * 1638 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all 1639 * supported interface types, each a flag attribute with the number 1640 * of the interface mode. 1641 * 1642 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for 1643 * %NL80211_CMD_SET_MGMT_EXTRA_IE. 1644 * 1645 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with 1646 * %NL80211_CMD_SET_MGMT_EXTRA_IE). 1647 * 1648 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with 1649 * a single scan request, a wiphy attribute. 1650 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can 1651 * scan with a single scheduled scan request, a wiphy attribute. 1652 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements 1653 * that can be added to a scan request 1654 * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information 1655 * elements that can be added to a scheduled scan request 1656 * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be 1657 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. 1658 * 1659 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) 1660 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive 1661 * scanning and include a zero-length SSID (wildcard) for wildcard scan 1662 * @NL80211_ATTR_BSS: scan result BSS 1663 * 1664 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain 1665 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* 1666 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently 1667 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) 1668 * 1669 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies 1670 * an array of command numbers (i.e. a mapping index to command number) 1671 * that the driver for the given wiphy supports. 1672 * 1673 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header 1674 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and 1675 * NL80211_CMD_ASSOCIATE events 1676 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) 1677 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, 1678 * represented as a u32 1679 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and 1680 * %NL80211_CMD_DISASSOCIATE, u16 1681 * 1682 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as 1683 * a u32 1684 * 1685 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change 1686 * due to considerations from a beacon hint. This attribute reflects 1687 * the state of the channel _before_ the beacon hint processing. This 1688 * attributes consists of a nested attribute containing 1689 * NL80211_FREQUENCY_ATTR_* 1690 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change 1691 * due to considerations from a beacon hint. This attribute reflects 1692 * the state of the channel _after_ the beacon hint processing. This 1693 * attributes consists of a nested attribute containing 1694 * NL80211_FREQUENCY_ATTR_* 1695 * 1696 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported 1697 * cipher suites 1698 * 1699 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look 1700 * for other networks on different channels 1701 * 1702 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this 1703 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event 1704 * 1705 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is 1706 * used for the association (&enum nl80211_mfp, represented as a u32); 1707 * this attribute can be used with %NL80211_CMD_ASSOCIATE and 1708 * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for 1709 * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it 1710 * must have decided whether to use management frame protection or not. 1711 * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will 1712 * let the driver (or the firmware) decide whether to use MFP or not. 1713 * 1714 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a 1715 * &struct nl80211_sta_flag_update. 1716 * 1717 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls 1718 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in 1719 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE 1720 * request, the driver will assume that the port is unauthorized until 1721 * authorized by user space. Otherwise, port is marked authorized by 1722 * default in station mode. 1723 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the 1724 * ethertype that will be used for key negotiation. It can be 1725 * specified with the associate and connect commands. If it is not 1726 * specified, the value defaults to 0x888E (PAE, 802.1X). This 1727 * attribute is also used as a flag in the wiphy information to 1728 * indicate that protocols other than PAE are supported. 1729 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with 1730 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom 1731 * ethertype frames used for key negotiation must not be encrypted. 1732 * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control 1733 * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) 1734 * will be sent directly to the network interface or sent via the NL80211 1735 * socket. If this attribute is missing, then legacy behavior of sending 1736 * control port frames directly to the network interface is used. If the 1737 * flag is included, then control port frames are sent over NL80211 instead 1738 * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is 1739 * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER 1740 * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth 1741 * frames are not forwared over the control port. 1742 * 1743 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. 1744 * We recommend using nested, driver-specific attributes within this. 1745 * 1746 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT 1747 * event was due to the AP disconnecting the station, and not due to 1748 * a local disconnect request. 1749 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT 1750 * event (u16) 1751 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating 1752 * that protected APs should be used. This is also used with NEW_BEACON to 1753 * indicate that the BSS is to use protection. 1754 * 1755 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON 1756 * to indicate which unicast key ciphers will be used with the connection 1757 * (an array of u32). 1758 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1759 * indicate which group key cipher will be used with the connection (a 1760 * u32). 1761 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1762 * indicate which WPA version(s) the AP we want to associate with is using 1763 * (a u32 with flags from &enum nl80211_wpa_versions). 1764 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1765 * indicate which key management algorithm(s) to use (an array of u32). 1766 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, 1767 * indicating the supported AKM suites, intended for specific drivers which 1768 * implement SME and have constraints on which AKMs are supported and also 1769 * the cases where an AKM support is offloaded to the driver/firmware. 1770 * If there is no such notification from the driver, user space should 1771 * assume the driver supports all the AKM suites. 1772 * 1773 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as 1774 * sent out by the card, for ROAM and successful CONNECT events. 1775 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as 1776 * sent by peer, for ROAM and successful CONNECT events. 1777 * 1778 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT 1779 * commands to specify a request to reassociate within an ESS, i.e., to use 1780 * Reassociate Request frame (with the value of this attribute in the 1781 * Current AP address field) instead of Association Request frame which is 1782 * used for the initial association to an ESS. 1783 * 1784 * @NL80211_ATTR_KEY: key information in a nested attribute with 1785 * %NL80211_KEY_* sub-attributes 1786 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() 1787 * and join_ibss(), key information is in a nested attribute each 1788 * with %NL80211_KEY_* sub-attributes 1789 * 1790 * @NL80211_ATTR_PID: Process ID of a network namespace. 1791 * 1792 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for 1793 * dumps. This number increases whenever the object list being 1794 * dumped changes, and as such userspace can verify that it has 1795 * obtained a complete and consistent snapshot by verifying that 1796 * all dump messages contain the same generation number. If it 1797 * changed then the list changed and the dump should be repeated 1798 * completely from scratch. 1799 * 1800 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface 1801 * 1802 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of 1803 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute 1804 * containing info as possible, see &enum survey_info. 1805 * 1806 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. 1807 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can 1808 * cache, a wiphy attribute. 1809 * 1810 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. 1811 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that 1812 * specifies the maximum duration that can be requested with the 1813 * remain-on-channel operation, in milliseconds, u32. 1814 * 1815 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. 1816 * 1817 * @NL80211_ATTR_TX_RATES: Nested set of attributes 1818 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The 1819 * enum nl80211_band value is used as the index (nla_type() of the nested 1820 * data. If a band is not included, it will be configured to allow all 1821 * rates based on negotiated supported rates information. This attribute 1822 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, 1823 * and joining mesh networks (not IBSS yet). In the later case, it must 1824 * specify just a single bitrate, which is to be used for the beacon. 1825 * The driver must also specify support for this with the extended 1826 * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 1827 * NL80211_EXT_FEATURE_BEACON_RATE_HT, 1828 * NL80211_EXT_FEATURE_BEACON_RATE_VHT and 1829 * NL80211_EXT_FEATURE_BEACON_RATE_HE. 1830 * 1831 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain 1832 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. 1833 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the 1834 * @NL80211_CMD_REGISTER_FRAME command. 1835 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a 1836 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1837 * information about which frame types can be transmitted with 1838 * %NL80211_CMD_FRAME. 1839 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a 1840 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1841 * information about which frame types can be registered for RX. 1842 * 1843 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was 1844 * acknowledged by the recipient. 1845 * 1846 * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. 1847 * 1848 * @NL80211_ATTR_CQM: connection quality monitor configuration in a 1849 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. 1850 * 1851 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command 1852 * is requesting a local authentication/association state change without 1853 * invoking actual management frame exchange. This can be used with 1854 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, 1855 * NL80211_CMD_DISASSOCIATE. 1856 * 1857 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations 1858 * connected to this BSS. 1859 * 1860 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See 1861 * &enum nl80211_tx_power_setting for possible values. 1862 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. 1863 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING 1864 * for non-automatic settings. 1865 * 1866 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly 1867 * means support for per-station GTKs. 1868 * 1869 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. 1870 * This can be used to mask out antennas which are not attached or should 1871 * not be used for transmitting. If an antenna is not selected in this 1872 * bitmap the hardware is not allowed to transmit on this antenna. 1873 * 1874 * Each bit represents one antenna, starting with antenna 1 at the first 1875 * bit. Depending on which antennas are selected in the bitmap, 802.11n 1876 * drivers can derive which chainmasks to use (if all antennas belonging to 1877 * a particular chain are disabled this chain should be disabled) and if 1878 * a chain has diversity antennas wether diversity should be used or not. 1879 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be 1880 * derived from the available chains after applying the antenna mask. 1881 * Non-802.11n drivers can derive wether to use diversity or not. 1882 * Drivers may reject configurations or RX/TX mask combinations they cannot 1883 * support by returning -EINVAL. 1884 * 1885 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. 1886 * This can be used to mask out antennas which are not attached or should 1887 * not be used for receiving. If an antenna is not selected in this bitmap 1888 * the hardware should not be configured to receive on this antenna. 1889 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. 1890 * 1891 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available 1892 * for configuration as TX antennas via the above parameters. 1893 * 1894 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available 1895 * for configuration as RX antennas via the above parameters. 1896 * 1897 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS 1898 * 1899 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be 1900 * transmitted on another channel when the channel given doesn't match 1901 * the current channel. If the current channel doesn't match and this 1902 * flag isn't set, the frame will be rejected. This is also used as an 1903 * nl80211 capability flag. 1904 * 1905 * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) 1906 * 1907 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags 1908 * attributes, specifying what a key should be set as default as. 1909 * See &enum nl80211_key_default_types. 1910 * 1911 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be 1912 * changed once the mesh is active. 1913 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute 1914 * containing attributes from &enum nl80211_meshconf_params. 1915 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver 1916 * allows auth frames in a mesh to be passed to userspace for processing via 1917 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. 1918 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in 1919 * &enum nl80211_plink_state. Used when userspace is driving the peer link 1920 * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or 1921 * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. 1922 * 1923 * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy 1924 * capabilities, the supported WoWLAN triggers 1925 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to 1926 * indicate which WoW triggers should be enabled. This is also 1927 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN 1928 * triggers. 1929 * 1930 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan 1931 * cycles, in msecs. 1932 * 1933 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more 1934 * sets of attributes to match during scheduled scans. Only BSSs 1935 * that match any of the sets will be reported. These are 1936 * pass-thru filter rules. 1937 * For a match to succeed, the BSS must match all attributes of a 1938 * set. Since not every hardware supports matching all types of 1939 * attributes, there is no guarantee that the reported BSSs are 1940 * fully complying with the match sets and userspace needs to be 1941 * able to ignore them by itself. 1942 * Thus, the implementation is somewhat hardware-dependent, but 1943 * this is only an optimization and the userspace application 1944 * needs to handle all the non-filtered results anyway. 1945 * If the match attributes don't make sense when combined with 1946 * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID 1947 * is included in the probe request, but the match attributes 1948 * will never let it go through), -EINVAL may be returned. 1949 * If omitted, no filtering is done. 1950 * 1951 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported 1952 * interface combinations. In each nested item, it contains attributes 1953 * defined in &enum nl80211_if_combination_attrs. 1954 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like 1955 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that 1956 * are managed in software: interfaces of these types aren't subject to 1957 * any restrictions in their number or combinations. 1958 * 1959 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information 1960 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. 1961 * 1962 * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, 1963 * nested array attribute containing an entry for each band, with the entry 1964 * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but 1965 * without the length restriction (at most %NL80211_MAX_SUPP_RATES). 1966 * 1967 * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon 1968 * and Probe Response (when response to wildcard Probe Request); see 1969 * &enum nl80211_hidden_ssid, represented as a u32 1970 * 1971 * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. 1972 * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to 1973 * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the 1974 * driver (or firmware) replies to Probe Request frames. 1975 * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association 1976 * Response frames. This is used with %NL80211_CMD_NEW_BEACON and 1977 * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into 1978 * (Re)Association Response frames when the driver (or firmware) replies to 1979 * (Re)Association Request frames. 1980 * 1981 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration 1982 * of the station, see &enum nl80211_sta_wme_attr. 1983 * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working 1984 * as AP. 1985 * 1986 * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of 1987 * roaming to another AP in the same ESS if the signal lever is low. 1988 * 1989 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching 1990 * candidate information, see &enum nl80211_pmksa_candidate_attr. 1991 * 1992 * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not 1993 * for management frames transmission. In order to avoid p2p probe/action 1994 * frames are being transmitted at CCK rate in 2GHz band, the user space 1995 * applications use this attribute. 1996 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and 1997 * %NL80211_CMD_FRAME commands. 1998 * 1999 * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup 2000 * request, link setup confirm, link teardown, etc.). Values are 2001 * described in the TDLS (802.11z) specification. 2002 * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a 2003 * TDLS conversation between two devices. 2004 * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see 2005 * &enum nl80211_tdls_operation, represented as a u8. 2006 * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate 2007 * as a TDLS peer sta. 2008 * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown 2009 * procedures should be performed by sending TDLS packets via 2010 * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be 2011 * used for asking the driver to perform a TDLS operation. 2012 * 2013 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices 2014 * that have AP support to indicate that they have the AP SME integrated 2015 * with support for the features listed in this attribute, see 2016 * &enum nl80211_ap_sme_features. 2017 * 2018 * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells 2019 * the driver to not wait for an acknowledgement. Note that due to this, 2020 * it will also not give a status callback nor return a cookie. This is 2021 * mostly useful for probe responses to save airtime. 2022 * 2023 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from 2024 * &enum nl80211_feature_flags and is advertised in wiphy information. 2025 * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe 2026 * requests while operating in AP-mode. 2027 * This attribute holds a bitmap of the supported protocols for 2028 * offloading (see &enum nl80211_probe_resp_offload_support_attr). 2029 * 2030 * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire 2031 * probe-response frame. The DA field in the 802.11 header is zero-ed out, 2032 * to be filled by the FW. 2033 * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable 2034 * this feature during association. This is a flag attribute. 2035 * Currently only supported in mac80211 drivers. 2036 * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable 2037 * this feature during association. This is a flag attribute. 2038 * Currently only supported in mac80211 drivers. 2039 * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable 2040 * this feature during association. This is a flag attribute. 2041 * Currently only supported in mac80211 drivers. 2042 * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the 2043 * ATTR_HT_CAPABILITY to which attention should be paid. 2044 * Currently, only mac80211 NICs support this feature. 2045 * The values that may be configured are: 2046 * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 2047 * AMPDU density and AMPDU factor. 2048 * All values are treated as suggestions and may be ignored 2049 * by the driver as required. The actual values may be seen in 2050 * the station debugfs ht_caps file. 2051 * 2052 * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country 2053 * abides to when initiating radiation on DFS channels. A country maps 2054 * to one DFS region. 2055 * 2056 * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of 2057 * up to 16 TIDs. 2058 * 2059 * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be 2060 * used by the drivers which has MLME in firmware and does not have support 2061 * to report per station tx/rx activity to free up the station entry from 2062 * the list. This needs to be used when the driver advertises the 2063 * capability to timeout the stations. 2064 * 2065 * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); 2066 * this attribute is (depending on the driver capabilities) added to 2067 * received frames indicated with %NL80211_CMD_FRAME. 2068 * 2069 * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds 2070 * or 0 to disable background scan. 2071 * 2072 * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from 2073 * userspace. If unset it is assumed the hint comes directly from 2074 * a user. If set code could specify exactly what type of source 2075 * was used to provide the hint. For the different types of 2076 * allowed user regulatory hints see nl80211_user_reg_hint_type. 2077 * 2078 * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected 2079 * the connection request from a station. nl80211_connect_failed_reason 2080 * enum has different reasons of connection failure. 2081 * 2082 * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. 2083 * This contains the authentication frame body (non-IE and IE data), 2084 * excluding the Authentication algorithm number, i.e., starting at the 2085 * Authentication transaction sequence number field. It is used with 2086 * authentication algorithms that need special fields to be added into 2087 * the frames (SAE and FILS). Currently, only the SAE cases use the 2088 * initial two fields (Authentication transaction sequence number and 2089 * Status code). However, those fields are included in the attribute data 2090 * for all authentication algorithms to keep the attribute definition 2091 * consistent. 2092 * 2093 * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from 2094 * association request when used with NL80211_CMD_NEW_STATION) 2095 * 2096 * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) 2097 * 2098 * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with 2099 * the START_AP and SET_BSS commands 2100 * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the 2101 * START_AP and SET_BSS commands. This can have the values 0 or 1; 2102 * if not given in START_AP 0 is assumed, if not given in SET_BSS 2103 * no change is made. 2104 * 2105 * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode 2106 * defined in &enum nl80211_mesh_power_mode. 2107 * 2108 * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, 2109 * carried in a u32 attribute 2110 * 2111 * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for 2112 * MAC ACL. 2113 * 2114 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum 2115 * number of MAC addresses that a device can support for MAC 2116 * ACL. 2117 * 2118 * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, 2119 * contains a value of enum nl80211_radar_event (u32). 2120 * 2121 * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver 2122 * has and handles. The format is the same as the IE contents. See 2123 * 802.11-2012 8.4.2.29 for more information. 2124 * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver 2125 * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. 2126 * 2127 * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to 2128 * the driver, e.g., to enable TDLS power save (PU-APSD). 2129 * 2130 * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are 2131 * advertised to the driver, e.g., to enable TDLS off channel operations 2132 * and PU-APSD. 2133 * 2134 * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see 2135 * &enum nl80211_protocol_features, the attribute is a u32. 2136 * 2137 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports 2138 * receiving the data for a single wiphy split across multiple 2139 * messages, given with wiphy dump message 2140 * 2141 * @NL80211_ATTR_MDID: Mobility Domain Identifier 2142 * 2143 * @NL80211_ATTR_IE_RIC: Resource Information Container Information 2144 * Element 2145 * 2146 * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased 2147 * reliability, see &enum nl80211_crit_proto_id (u16). 2148 * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which 2149 * the connection should have increased reliability (u16). 2150 * 2151 * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). 2152 * This is similar to @NL80211_ATTR_STA_AID but with a difference of being 2153 * allowed to be used with the first @NL80211_CMD_SET_STATION command to 2154 * update a TDLS peer STA entry. 2155 * 2156 * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. 2157 * 2158 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's 2159 * until the channel switch event. 2160 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission 2161 * must be blocked on the current channel (before the channel switch 2162 * operation). Also included in the channel switch started event if quiet 2163 * was requested by the AP. 2164 * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information 2165 * for the time while performing a channel switch. 2166 * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel 2167 * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). 2168 * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel 2169 * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). 2170 * 2171 * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. 2172 * As specified in the &enum nl80211_rxmgmt_flags. 2173 * 2174 * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. 2175 * 2176 * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported 2177 * operating classes. 2178 * 2179 * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space 2180 * controls DFS operation in IBSS mode. If the flag is included in 2181 * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS 2182 * channels and reports radar events to userspace. Userspace is required 2183 * to react to radar events, e.g. initiate a channel switch or leave the 2184 * IBSS network. 2185 * 2186 * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports 2187 * 5 MHz channel bandwidth. 2188 * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports 2189 * 10 MHz channel bandwidth. 2190 * 2191 * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode 2192 * Notification Element based on association request when used with 2193 * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when 2194 * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); 2195 * u8 attribute. 2196 * 2197 * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if 2198 * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) 2199 * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command 2200 * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this 2201 * attribute is also used for vendor command feature advertisement 2202 * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy 2203 * info, containing a nested array of possible events 2204 * 2205 * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This 2206 * data is in the format defined for the payload of the QoS Map Set element 2207 * in IEEE Std 802.11-2012, 8.4.2.97. 2208 * 2209 * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS 2210 * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS 2211 * 2212 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many 2213 * associated stations are supported in AP mode (including P2P GO); u32. 2214 * Since drivers may not have a fixed limit on the maximum number (e.g., 2215 * other concurrent operations may affect this), drivers are allowed to 2216 * advertise values that cannot always be met. In such cases, an attempt 2217 * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. 2218 * 2219 * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which 2220 * should be updated when the frame is transmitted. 2221 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum 2222 * supported number of csa counters. 2223 * 2224 * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. 2225 * As specified in the &enum nl80211_tdls_peer_capability. 2226 * 2227 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface 2228 * creation then the new interface will be owned by the netlink socket 2229 * that created it and will be destroyed when the socket is closed. 2230 * If set during scheduled scan start then the new scan req will be 2231 * owned by the netlink socket that created it and the scheduled scan will 2232 * be stopped when the socket is closed. 2233 * If set during configuration of regulatory indoor operation then the 2234 * regulatory indoor configuration would be owned by the netlink socket 2235 * that configured the indoor setting, and the indoor operation would be 2236 * cleared when the socket is closed. 2237 * If set during NAN interface creation, the interface will be destroyed 2238 * if the socket is closed just like any other interface. Moreover, NAN 2239 * notifications will be sent in unicast to that socket. Without this 2240 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN 2241 * multicast group. 2242 * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the 2243 * station will deauthenticate when the socket is closed. 2244 * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically 2245 * torn down when the socket is closed. 2246 * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be 2247 * automatically torn down when the socket is closed. 2248 * If set during %NL80211_CMD_START_AP the AP will be automatically 2249 * disabled when the socket is closed. 2250 * 2251 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is 2252 * the TDLS link initiator. 2253 * 2254 * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection 2255 * shall support Radio Resource Measurements (11k). This attribute can be 2256 * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. 2257 * User space applications are expected to use this flag only if the 2258 * underlying device supports these minimal RRM features: 2259 * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, 2260 * %NL80211_FEATURE_QUIET, 2261 * Or, if global RRM is supported, see: 2262 * %NL80211_EXT_FEATURE_RRM 2263 * If this flag is used, driver must add the Power Capabilities IE to the 2264 * association request. In addition, it must also set the RRM capability 2265 * flag in the association request's Capability Info field. 2266 * 2267 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout 2268 * estimation algorithm (dynack). In order to activate dynack 2269 * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower 2270 * drivers to indicate dynack capability. Dynack is automatically disabled 2271 * setting valid value for coverage class. 2272 * 2273 * @NL80211_ATTR_TSID: a TSID value (u8 attribute) 2274 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) 2275 * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds 2276 * (per second) (u16 attribute) 2277 * 2278 * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see 2279 * &enum nl80211_smps_mode. 2280 * 2281 * @NL80211_ATTR_OPER_CLASS: operating class 2282 * 2283 * @NL80211_ATTR_MAC_MASK: MAC address mask 2284 * 2285 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device 2286 * is self-managing its regulatory information and any regulatory domain 2287 * obtained from it is coming from the device's wiphy and not the global 2288 * cfg80211 regdomain. 2289 * 2290 * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte 2291 * array. The feature flags are identified by their bit index (see &enum 2292 * nl80211_ext_feature_index). The bit index is ordered starting at the 2293 * least-significant bit of the first byte in the array, ie. bit index 0 2294 * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 2295 * of byte 3 (u8 array). 2296 * 2297 * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be 2298 * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY 2299 * may return a survey entry without a channel indicating global radio 2300 * statistics (only some values are valid and make sense.) 2301 * For devices that don't return such an entry even then, the information 2302 * should be contained in the result as the sum of the respective counters 2303 * over all channels. 2304 * 2305 * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a 2306 * scheduled scan is started. Or the delay before a WoWLAN 2307 * net-detect scan is started, counting from the moment the 2308 * system is suspended. This value is a u32, in seconds. 2309 2310 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device 2311 * is operating in an indoor environment. 2312 * 2313 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for 2314 * scheduled scan supported by the device (u32), a wiphy attribute. 2315 * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for 2316 * a scan plan (u32), a wiphy attribute. 2317 * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in 2318 * a scan plan (u32), a wiphy attribute. 2319 * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. 2320 * Each scan plan defines the number of scan iterations and the interval 2321 * between scans. The last scan plan will always run infinitely, 2322 * thus it must not specify the number of iterations, only the interval 2323 * between scans. The scan plans are executed sequentially. 2324 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. 2325 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate 2326 * in a PBSS. Specified in %NL80211_CMD_CONNECT to request 2327 * connecting to a PCP, and in %NL80211_CMD_START_AP to start 2328 * a PCP instead of AP. Relevant for DMG networks only. 2329 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the 2330 * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains 2331 * attributes according &enum nl80211_bss_select_attr to indicate what 2332 * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT 2333 * it contains the behaviour-specific attribute containing the parameters for 2334 * BSS selection to be done by driver and/or firmware. 2335 * 2336 * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported 2337 * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status 2338 * 2339 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment 2340 * 2341 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: 2342 * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, 2343 * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per 2344 * interface type. 2345 * 2346 * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO 2347 * groupID for monitor mode. 2348 * The first 8 bytes are a mask that defines the membership in each 2349 * group (there are 64 groups, group 0 and 63 are reserved), 2350 * each bit represents a group and set to 1 for being a member in 2351 * that group and 0 for not being a member. 2352 * The remaining 16 bytes define the position in each group: 2 bits for 2353 * each group. 2354 * (smaller group numbers represented on most significant bits and bigger 2355 * group numbers on least significant bits.) 2356 * This attribute is used only if all interfaces are in monitor mode. 2357 * Set this attribute in order to monitor packets using the given MU-MIMO 2358 * groupID data. 2359 * to turn off that feature set all the bits of the groupID to zero. 2360 * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow 2361 * when using MU-MIMO air sniffer. 2362 * to turn that feature off set an invalid mac address 2363 * (e.g. FF:FF:FF:FF:FF:FF) 2364 * 2365 * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually 2366 * started (u64). The time is the TSF of the BSS the interface that 2367 * requested the scan is connected to (if available, otherwise this 2368 * attribute must not be included). 2369 * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which 2370 * %NL80211_ATTR_SCAN_START_TIME_TSF is set. 2371 * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If 2372 * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the 2373 * maximum measurement duration allowed. This attribute is used with 2374 * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN 2375 * if the scan is used for beacon report radio measurement. 2376 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates 2377 * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is 2378 * mandatory. If this flag is not set, the duration is the maximum duration 2379 * and the actual measurement duration may be shorter. 2380 * 2381 * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is 2382 * used to pull the stored data for mesh peer in power save state. 2383 * 2384 * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by 2385 * %NL80211_CMD_START_NAN and optionally with 2386 * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. 2387 * Also, values 1 and 255 are reserved for certification purposes and 2388 * should not be used during a normal device operation. 2389 * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 2390 * bitmask of BIT(NL80211_BAND_*) as described in %enum 2391 * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 2392 * would be set. This attribute is used with 2393 * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and 2394 * it is optional. If no bands are set, it means don't-care and 2395 * the device will decide what to use. 2396 * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See 2397 * &enum nl80211_nan_func_attributes for description of this nested 2398 * attribute. 2399 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. 2400 * See &enum nl80211_nan_match_attributes. 2401 * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame 2402 * protection. 2403 * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association 2404 * Request/Response frame protection. This attribute contains the 16 octet 2405 * STA Nonce followed by 16 octets of AP Nonce. 2406 * 2407 * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast 2408 * packets should be send out as unicast to all stations (flag attribute). 2409 * 2410 * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also 2411 * used in various commands/events for specifying the BSSID. 2412 * 2413 * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which 2414 * other BSSs has to be better or slightly worse than the current 2415 * connected BSS so that they get reported to user space. 2416 * This will give an opportunity to userspace to consider connecting to 2417 * other matching BSSs which have better or slightly worse RSSI than 2418 * the current connected BSS by using an offloaded operation to avoid 2419 * unnecessary wakeups. 2420 * 2421 * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in 2422 * the specified band is to be adjusted before doing 2423 * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out 2424 * better BSSs. The attribute value is a packed structure 2425 * value as specified by &struct nl80211_bss_select_rssi_adjust. 2426 * 2427 * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. 2428 * u32 attribute with an &enum nl80211_timeout_reason value. This is used, 2429 * e.g., with %NL80211_CMD_CONNECT event. 2430 * 2431 * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) 2432 * username part of NAI used to refer keys rRK and rIK. This is used with 2433 * %NL80211_CMD_CONNECT. 2434 * 2435 * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part 2436 * of NAI specifying the domain name of the ER server. This is used with 2437 * %NL80211_CMD_CONNECT. 2438 * 2439 * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number 2440 * to use in ERP messages. This is used in generating the FILS wrapped data 2441 * for FILS authentication and is used with %NL80211_CMD_CONNECT. 2442 * 2443 * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the 2444 * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and 2445 * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK 2446 * from successful FILS authentication and is used with 2447 * %NL80211_CMD_CONNECT. 2448 * 2449 * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP 2450 * identifying the scope of PMKSAs. This is used with 2451 * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. 2452 * 2453 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with 2454 * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. 2455 * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide 2456 * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X 2457 * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT 2458 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME 2459 * is included as well. 2460 * 2461 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to 2462 * indicate that it supports multiple active scheduled scan requests. 2463 * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled 2464 * scan request that may be active for the device (u32). 2465 * 2466 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include 2467 * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it 2468 * wants to use the supported offload of the 4-way handshake. 2469 * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. 2470 * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) 2471 * 2472 * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external 2473 * authentication operation (u32 attribute with an 2474 * &enum nl80211_external_auth_action value). This is used with the 2475 * %NL80211_CMD_EXTERNAL_AUTH request event. 2476 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user 2477 * space supports external authentication. This attribute shall be used 2478 * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver 2479 * may offload authentication processing to user space if this capability 2480 * is indicated in the respective requests from the user space. (This flag 2481 * attribute deprecated for %NL80211_CMD_START_AP, use 2482 * %NL80211_ATTR_AP_SETTINGS_FLAGS) 2483 * 2484 * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this 2485 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. 2486 * 2487 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum 2488 * nl80211_txq_stats) 2489 * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. 2490 * The smaller of this and the memory limit is enforced. 2491 * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the 2492 * TXQ queues for this phy. The smaller of this and the packet limit is 2493 * enforced. 2494 * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes 2495 * a flow is assigned on each round of the DRR scheduler. 2496 * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from 2497 * association request when used with NL80211_CMD_NEW_STATION). Can be set 2498 * only if %NL80211_STA_FLAG_WME is set. 2499 * 2500 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include 2501 * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing 2502 * measurement (FTM) responder functionality and containing parameters as 2503 * possible, see &enum nl80211_ftm_responder_attr 2504 * 2505 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder 2506 * statistics, see &enum nl80211_ftm_responder_stats. 2507 * 2508 * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), 2509 * if the attribute is not given no timeout is requested. Note that 0 is an 2510 * invalid value. 2511 * 2512 * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) 2513 * data, uses nested attributes specified in 2514 * &enum nl80211_peer_measurement_attrs. 2515 * This is also used for capability advertisement in the wiphy information, 2516 * with the appropriate sub-attributes. 2517 * 2518 * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime 2519 * scheduler. 2520 * 2521 * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for 2522 * station associated with the AP. See &enum nl80211_tx_power_setting for 2523 * possible values. 2524 * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This 2525 * allows to set Tx power for a station. If this attribute is not included, 2526 * the default per-interface tx power setting will be overriding. Driver 2527 * should be picking up the lowest tx power, either tx power per-interface 2528 * or per-station. 2529 * 2530 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It 2531 * is used with %NL80211_CMD_CONNECT to provide password for offloading 2532 * SAE authentication for WPA3-Personal networks. 2533 * 2534 * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. 2535 * 2536 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection 2537 * functionality. 2538 * 2539 * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 2540 * channel(s) that are allowed to be used for EDMG transmissions. 2541 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) 2542 * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 2543 * the allowed channel bandwidth configurations. (u8 attribute) 2544 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 2545 * 2546 * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key 2547 * (u16). 2548 * 2549 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. 2550 * 2551 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry 2552 * using attributes from &enum nl80211_iftype_akm_attributes. This 2553 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating 2554 * supported AKM suites capability per interface. AKMs advertised in 2555 * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not 2556 * advertised for a specific interface type. 2557 * 2558 * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a 2559 * nested attribute with &enum nl80211_tid_config_attr sub-attributes; 2560 * on output (in wiphy attributes) it contains only the feature sub- 2561 * attributes. 2562 * 2563 * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control 2564 * port in order to forward/receive them as ordinary data frames. 2565 * 2566 * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, 2567 * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). 2568 * An optional parameter configured through %NL80211_CMD_SET_PMKSA. 2569 * Drivers that trigger roaming need to know the lifetime of the 2570 * configured PMKSA for triggering the full vs. PMKSA caching based 2571 * authentication. This timeout helps authentication methods like SAE, 2572 * where PMK gets updated only by going through a full (new SAE) 2573 * authentication instead of getting updated during an association for EAP 2574 * authentication. No new full authentication within the PMK expiry shall 2575 * result in a disassociation at the end of the lifetime. 2576 * 2577 * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in 2578 * terms of percentage of %NL80211_ATTR_PMK_LIFETIME 2579 * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional 2580 * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the 2581 * driver to trigger a full authentication roam (without PMKSA caching) 2582 * after the reauthentication threshold time, but before the PMK lifetime 2583 * has expired. 2584 * 2585 * Authentication methods like SAE need to be able to generate a new PMKSA 2586 * entry without having to force a disconnection after the PMK timeout. If 2587 * no roaming occurs between the reauth threshold and PMK expiration, 2588 * disassociation is still forced. 2589 * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the 2590 * %NL80211_CMD_REGISTER_FRAME command, see the description there. 2591 * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated 2592 * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with 2593 * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. 2594 * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the 2595 * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. 2596 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies 2597 * 2598 * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from 2599 * association request when used with NL80211_CMD_NEW_STATION). 2600 * 2601 * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS 2602 * discovery. It is a nested attribute, see 2603 * &enum nl80211_fils_discovery_attributes. 2604 * 2605 * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure 2606 * unsolicited broadcast probe response. It is a nested attribute, see 2607 * &enum nl80211_unsol_bcast_probe_resp_attributes. 2608 * 2609 * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from 2610 * association request when used with NL80211_CMD_NEW_STATION) 2611 * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element 2612 * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in 2613 * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. 2614 * 2615 * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE 2616 * derivation in WPA3-Personal networks which are using SAE authentication. 2617 * This is a u8 attribute that encapsulates one of the values from 2618 * &enum nl80211_sae_pwe_mechanism. 2619 * 2620 * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when 2621 * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields 2622 * of %nl80211_sar_attrs which specifies the sar type and related 2623 * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. 2624 * 2625 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and 2626 * disassoc events to indicate that an immediate reconnect to the AP 2627 * is desired. 2628 * 2629 * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the 2630 * %NL80211_CMD_OBSS_COLOR_COLLISION event. 2631 * 2632 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's 2633 * until the color switch event. 2634 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are 2635 * switching to 2636 * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE 2637 * information for the time while performing a color switch. 2638 * 2639 * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID 2640 * advertisements (MBSSID) parameters in AP mode. 2641 * Kernel uses this attribute to indicate the driver's support for MBSSID 2642 * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. 2643 * Userspace should use this attribute to configure per interface MBSSID 2644 * parameters. 2645 * See &enum nl80211_mbssid_config_attributes for details. 2646 * 2647 * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. 2648 * Mandatory parameter for the transmitting interface to enable MBSSID. 2649 * Optional for the non-transmitting interfaces. 2650 * 2651 * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain 2652 * available for radar/CAC detection on some hw. This chain can't be used 2653 * to transmit or receive frames and it is bounded to a running wdev. 2654 * Background radar/CAC detection allows to avoid the CAC downtime 2655 * switching on a different channel during CAC detection on the selected 2656 * radar channel. 2657 * 2658 * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, 2659 * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be 2660 * used with %NL80211_CMD_START_AP request. 2661 * 2662 * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from 2663 * association request when used with NL80211_CMD_NEW_STATION). Can be set 2664 * only if %NL80211_STA_FLAG_WME is set. 2665 * 2666 * @NUM_NL80211_ATTR: total number of nl80211_attrs available 2667 * @NL80211_ATTR_MAX: highest attribute number currently defined 2668 * @__NL80211_ATTR_AFTER_LAST: internal use 2669 */ 2670 enum nl80211_attrs { 2671 /* don't change the order or add anything between, this is ABI! */ 2672 NL80211_ATTR_UNSPEC, 2673 2674 NL80211_ATTR_WIPHY, 2675 NL80211_ATTR_WIPHY_NAME, 2676 2677 NL80211_ATTR_IFINDEX, 2678 NL80211_ATTR_IFNAME, 2679 NL80211_ATTR_IFTYPE, 2680 2681 NL80211_ATTR_MAC, 2682 2683 NL80211_ATTR_KEY_DATA, 2684 NL80211_ATTR_KEY_IDX, 2685 NL80211_ATTR_KEY_CIPHER, 2686 NL80211_ATTR_KEY_SEQ, 2687 NL80211_ATTR_KEY_DEFAULT, 2688 2689 NL80211_ATTR_BEACON_INTERVAL, 2690 NL80211_ATTR_DTIM_PERIOD, 2691 NL80211_ATTR_BEACON_HEAD, 2692 NL80211_ATTR_BEACON_TAIL, 2693 2694 NL80211_ATTR_STA_AID, 2695 NL80211_ATTR_STA_FLAGS, 2696 NL80211_ATTR_STA_LISTEN_INTERVAL, 2697 NL80211_ATTR_STA_SUPPORTED_RATES, 2698 NL80211_ATTR_STA_VLAN, 2699 NL80211_ATTR_STA_INFO, 2700 2701 NL80211_ATTR_WIPHY_BANDS, 2702 2703 NL80211_ATTR_MNTR_FLAGS, 2704 2705 NL80211_ATTR_MESH_ID, 2706 NL80211_ATTR_STA_PLINK_ACTION, 2707 NL80211_ATTR_MPATH_NEXT_HOP, 2708 NL80211_ATTR_MPATH_INFO, 2709 2710 NL80211_ATTR_BSS_CTS_PROT, 2711 NL80211_ATTR_BSS_SHORT_PREAMBLE, 2712 NL80211_ATTR_BSS_SHORT_SLOT_TIME, 2713 2714 NL80211_ATTR_HT_CAPABILITY, 2715 2716 NL80211_ATTR_SUPPORTED_IFTYPES, 2717 2718 NL80211_ATTR_REG_ALPHA2, 2719 NL80211_ATTR_REG_RULES, 2720 2721 NL80211_ATTR_MESH_CONFIG, 2722 2723 NL80211_ATTR_BSS_BASIC_RATES, 2724 2725 NL80211_ATTR_WIPHY_TXQ_PARAMS, 2726 NL80211_ATTR_WIPHY_FREQ, 2727 NL80211_ATTR_WIPHY_CHANNEL_TYPE, 2728 2729 NL80211_ATTR_KEY_DEFAULT_MGMT, 2730 2731 NL80211_ATTR_MGMT_SUBTYPE, 2732 NL80211_ATTR_IE, 2733 2734 NL80211_ATTR_MAX_NUM_SCAN_SSIDS, 2735 2736 NL80211_ATTR_SCAN_FREQUENCIES, 2737 NL80211_ATTR_SCAN_SSIDS, 2738 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ 2739 NL80211_ATTR_BSS, 2740 2741 NL80211_ATTR_REG_INITIATOR, 2742 NL80211_ATTR_REG_TYPE, 2743 2744 NL80211_ATTR_SUPPORTED_COMMANDS, 2745 2746 NL80211_ATTR_FRAME, 2747 NL80211_ATTR_SSID, 2748 NL80211_ATTR_AUTH_TYPE, 2749 NL80211_ATTR_REASON_CODE, 2750 2751 NL80211_ATTR_KEY_TYPE, 2752 2753 NL80211_ATTR_MAX_SCAN_IE_LEN, 2754 NL80211_ATTR_CIPHER_SUITES, 2755 2756 NL80211_ATTR_FREQ_BEFORE, 2757 NL80211_ATTR_FREQ_AFTER, 2758 2759 NL80211_ATTR_FREQ_FIXED, 2760 2761 2762 NL80211_ATTR_WIPHY_RETRY_SHORT, 2763 NL80211_ATTR_WIPHY_RETRY_LONG, 2764 NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 2765 NL80211_ATTR_WIPHY_RTS_THRESHOLD, 2766 2767 NL80211_ATTR_TIMED_OUT, 2768 2769 NL80211_ATTR_USE_MFP, 2770 2771 NL80211_ATTR_STA_FLAGS2, 2772 2773 NL80211_ATTR_CONTROL_PORT, 2774 2775 NL80211_ATTR_TESTDATA, 2776 2777 NL80211_ATTR_PRIVACY, 2778 2779 NL80211_ATTR_DISCONNECTED_BY_AP, 2780 NL80211_ATTR_STATUS_CODE, 2781 2782 NL80211_ATTR_CIPHER_SUITES_PAIRWISE, 2783 NL80211_ATTR_CIPHER_SUITE_GROUP, 2784 NL80211_ATTR_WPA_VERSIONS, 2785 NL80211_ATTR_AKM_SUITES, 2786 2787 NL80211_ATTR_REQ_IE, 2788 NL80211_ATTR_RESP_IE, 2789 2790 NL80211_ATTR_PREV_BSSID, 2791 2792 NL80211_ATTR_KEY, 2793 NL80211_ATTR_KEYS, 2794 2795 NL80211_ATTR_PID, 2796 2797 NL80211_ATTR_4ADDR, 2798 2799 NL80211_ATTR_SURVEY_INFO, 2800 2801 NL80211_ATTR_PMKID, 2802 NL80211_ATTR_MAX_NUM_PMKIDS, 2803 2804 NL80211_ATTR_DURATION, 2805 2806 NL80211_ATTR_COOKIE, 2807 2808 NL80211_ATTR_WIPHY_COVERAGE_CLASS, 2809 2810 NL80211_ATTR_TX_RATES, 2811 2812 NL80211_ATTR_FRAME_MATCH, 2813 2814 NL80211_ATTR_ACK, 2815 2816 NL80211_ATTR_PS_STATE, 2817 2818 NL80211_ATTR_CQM, 2819 2820 NL80211_ATTR_LOCAL_STATE_CHANGE, 2821 2822 NL80211_ATTR_AP_ISOLATE, 2823 2824 NL80211_ATTR_WIPHY_TX_POWER_SETTING, 2825 NL80211_ATTR_WIPHY_TX_POWER_LEVEL, 2826 2827 NL80211_ATTR_TX_FRAME_TYPES, 2828 NL80211_ATTR_RX_FRAME_TYPES, 2829 NL80211_ATTR_FRAME_TYPE, 2830 2831 NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 2832 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 2833 2834 NL80211_ATTR_SUPPORT_IBSS_RSN, 2835 2836 NL80211_ATTR_WIPHY_ANTENNA_TX, 2837 NL80211_ATTR_WIPHY_ANTENNA_RX, 2838 2839 NL80211_ATTR_MCAST_RATE, 2840 2841 NL80211_ATTR_OFFCHANNEL_TX_OK, 2842 2843 NL80211_ATTR_BSS_HT_OPMODE, 2844 2845 NL80211_ATTR_KEY_DEFAULT_TYPES, 2846 2847 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, 2848 2849 NL80211_ATTR_MESH_SETUP, 2850 2851 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, 2852 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, 2853 2854 NL80211_ATTR_SUPPORT_MESH_AUTH, 2855 NL80211_ATTR_STA_PLINK_STATE, 2856 2857 NL80211_ATTR_WOWLAN_TRIGGERS, 2858 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, 2859 2860 NL80211_ATTR_SCHED_SCAN_INTERVAL, 2861 2862 NL80211_ATTR_INTERFACE_COMBINATIONS, 2863 NL80211_ATTR_SOFTWARE_IFTYPES, 2864 2865 NL80211_ATTR_REKEY_DATA, 2866 2867 NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, 2868 NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, 2869 2870 NL80211_ATTR_SCAN_SUPP_RATES, 2871 2872 NL80211_ATTR_HIDDEN_SSID, 2873 2874 NL80211_ATTR_IE_PROBE_RESP, 2875 NL80211_ATTR_IE_ASSOC_RESP, 2876 2877 NL80211_ATTR_STA_WME, 2878 NL80211_ATTR_SUPPORT_AP_UAPSD, 2879 2880 NL80211_ATTR_ROAM_SUPPORT, 2881 2882 NL80211_ATTR_SCHED_SCAN_MATCH, 2883 NL80211_ATTR_MAX_MATCH_SETS, 2884 2885 NL80211_ATTR_PMKSA_CANDIDATE, 2886 2887 NL80211_ATTR_TX_NO_CCK_RATE, 2888 2889 NL80211_ATTR_TDLS_ACTION, 2890 NL80211_ATTR_TDLS_DIALOG_TOKEN, 2891 NL80211_ATTR_TDLS_OPERATION, 2892 NL80211_ATTR_TDLS_SUPPORT, 2893 NL80211_ATTR_TDLS_EXTERNAL_SETUP, 2894 2895 NL80211_ATTR_DEVICE_AP_SME, 2896 2897 NL80211_ATTR_DONT_WAIT_FOR_ACK, 2898 2899 NL80211_ATTR_FEATURE_FLAGS, 2900 2901 NL80211_ATTR_PROBE_RESP_OFFLOAD, 2902 2903 NL80211_ATTR_PROBE_RESP, 2904 2905 NL80211_ATTR_DFS_REGION, 2906 2907 NL80211_ATTR_DISABLE_HT, 2908 NL80211_ATTR_HT_CAPABILITY_MASK, 2909 2910 NL80211_ATTR_NOACK_MAP, 2911 2912 NL80211_ATTR_INACTIVITY_TIMEOUT, 2913 2914 NL80211_ATTR_RX_SIGNAL_DBM, 2915 2916 NL80211_ATTR_BG_SCAN_PERIOD, 2917 2918 NL80211_ATTR_WDEV, 2919 2920 NL80211_ATTR_USER_REG_HINT_TYPE, 2921 2922 NL80211_ATTR_CONN_FAILED_REASON, 2923 2924 NL80211_ATTR_AUTH_DATA, 2925 2926 NL80211_ATTR_VHT_CAPABILITY, 2927 2928 NL80211_ATTR_SCAN_FLAGS, 2929 2930 NL80211_ATTR_CHANNEL_WIDTH, 2931 NL80211_ATTR_CENTER_FREQ1, 2932 NL80211_ATTR_CENTER_FREQ2, 2933 2934 NL80211_ATTR_P2P_CTWINDOW, 2935 NL80211_ATTR_P2P_OPPPS, 2936 2937 NL80211_ATTR_LOCAL_MESH_POWER_MODE, 2938 2939 NL80211_ATTR_ACL_POLICY, 2940 2941 NL80211_ATTR_MAC_ADDRS, 2942 2943 NL80211_ATTR_MAC_ACL_MAX, 2944 2945 NL80211_ATTR_RADAR_EVENT, 2946 2947 NL80211_ATTR_EXT_CAPA, 2948 NL80211_ATTR_EXT_CAPA_MASK, 2949 2950 NL80211_ATTR_STA_CAPABILITY, 2951 NL80211_ATTR_STA_EXT_CAPABILITY, 2952 2953 NL80211_ATTR_PROTOCOL_FEATURES, 2954 NL80211_ATTR_SPLIT_WIPHY_DUMP, 2955 2956 NL80211_ATTR_DISABLE_VHT, 2957 NL80211_ATTR_VHT_CAPABILITY_MASK, 2958 2959 NL80211_ATTR_MDID, 2960 NL80211_ATTR_IE_RIC, 2961 2962 NL80211_ATTR_CRIT_PROT_ID, 2963 NL80211_ATTR_MAX_CRIT_PROT_DURATION, 2964 2965 NL80211_ATTR_PEER_AID, 2966 2967 NL80211_ATTR_COALESCE_RULE, 2968 2969 NL80211_ATTR_CH_SWITCH_COUNT, 2970 NL80211_ATTR_CH_SWITCH_BLOCK_TX, 2971 NL80211_ATTR_CSA_IES, 2972 NL80211_ATTR_CNTDWN_OFFS_BEACON, 2973 NL80211_ATTR_CNTDWN_OFFS_PRESP, 2974 2975 NL80211_ATTR_RXMGMT_FLAGS, 2976 2977 NL80211_ATTR_STA_SUPPORTED_CHANNELS, 2978 2979 NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, 2980 2981 NL80211_ATTR_HANDLE_DFS, 2982 2983 NL80211_ATTR_SUPPORT_5_MHZ, 2984 NL80211_ATTR_SUPPORT_10_MHZ, 2985 2986 NL80211_ATTR_OPMODE_NOTIF, 2987 2988 NL80211_ATTR_VENDOR_ID, 2989 NL80211_ATTR_VENDOR_SUBCMD, 2990 NL80211_ATTR_VENDOR_DATA, 2991 NL80211_ATTR_VENDOR_EVENTS, 2992 2993 NL80211_ATTR_QOS_MAP, 2994 2995 NL80211_ATTR_MAC_HINT, 2996 NL80211_ATTR_WIPHY_FREQ_HINT, 2997 2998 NL80211_ATTR_MAX_AP_ASSOC_STA, 2999 3000 NL80211_ATTR_TDLS_PEER_CAPABILITY, 3001 3002 NL80211_ATTR_SOCKET_OWNER, 3003 3004 NL80211_ATTR_CSA_C_OFFSETS_TX, 3005 NL80211_ATTR_MAX_CSA_COUNTERS, 3006 3007 NL80211_ATTR_TDLS_INITIATOR, 3008 3009 NL80211_ATTR_USE_RRM, 3010 3011 NL80211_ATTR_WIPHY_DYN_ACK, 3012 3013 NL80211_ATTR_TSID, 3014 NL80211_ATTR_USER_PRIO, 3015 NL80211_ATTR_ADMITTED_TIME, 3016 3017 NL80211_ATTR_SMPS_MODE, 3018 3019 NL80211_ATTR_OPER_CLASS, 3020 3021 NL80211_ATTR_MAC_MASK, 3022 3023 NL80211_ATTR_WIPHY_SELF_MANAGED_REG, 3024 3025 NL80211_ATTR_EXT_FEATURES, 3026 3027 NL80211_ATTR_SURVEY_RADIO_STATS, 3028 3029 NL80211_ATTR_NETNS_FD, 3030 3031 NL80211_ATTR_SCHED_SCAN_DELAY, 3032 3033 NL80211_ATTR_REG_INDOOR, 3034 3035 NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, 3036 NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, 3037 NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, 3038 NL80211_ATTR_SCHED_SCAN_PLANS, 3039 3040 NL80211_ATTR_PBSS, 3041 3042 NL80211_ATTR_BSS_SELECT, 3043 3044 NL80211_ATTR_STA_SUPPORT_P2P_PS, 3045 3046 NL80211_ATTR_PAD, 3047 3048 NL80211_ATTR_IFTYPE_EXT_CAPA, 3049 3050 NL80211_ATTR_MU_MIMO_GROUP_DATA, 3051 NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, 3052 3053 NL80211_ATTR_SCAN_START_TIME_TSF, 3054 NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, 3055 NL80211_ATTR_MEASUREMENT_DURATION, 3056 NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, 3057 3058 NL80211_ATTR_MESH_PEER_AID, 3059 3060 NL80211_ATTR_NAN_MASTER_PREF, 3061 NL80211_ATTR_BANDS, 3062 NL80211_ATTR_NAN_FUNC, 3063 NL80211_ATTR_NAN_MATCH, 3064 3065 NL80211_ATTR_FILS_KEK, 3066 NL80211_ATTR_FILS_NONCES, 3067 3068 NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, 3069 3070 NL80211_ATTR_BSSID, 3071 3072 NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, 3073 NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, 3074 3075 NL80211_ATTR_TIMEOUT_REASON, 3076 3077 NL80211_ATTR_FILS_ERP_USERNAME, 3078 NL80211_ATTR_FILS_ERP_REALM, 3079 NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, 3080 NL80211_ATTR_FILS_ERP_RRK, 3081 NL80211_ATTR_FILS_CACHE_ID, 3082 3083 NL80211_ATTR_PMK, 3084 3085 NL80211_ATTR_SCHED_SCAN_MULTI, 3086 NL80211_ATTR_SCHED_SCAN_MAX_REQS, 3087 3088 NL80211_ATTR_WANT_1X_4WAY_HS, 3089 NL80211_ATTR_PMKR0_NAME, 3090 NL80211_ATTR_PORT_AUTHORIZED, 3091 3092 NL80211_ATTR_EXTERNAL_AUTH_ACTION, 3093 NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, 3094 3095 NL80211_ATTR_NSS, 3096 NL80211_ATTR_ACK_SIGNAL, 3097 3098 NL80211_ATTR_CONTROL_PORT_OVER_NL80211, 3099 3100 NL80211_ATTR_TXQ_STATS, 3101 NL80211_ATTR_TXQ_LIMIT, 3102 NL80211_ATTR_TXQ_MEMORY_LIMIT, 3103 NL80211_ATTR_TXQ_QUANTUM, 3104 3105 NL80211_ATTR_HE_CAPABILITY, 3106 3107 NL80211_ATTR_FTM_RESPONDER, 3108 3109 NL80211_ATTR_FTM_RESPONDER_STATS, 3110 3111 NL80211_ATTR_TIMEOUT, 3112 3113 NL80211_ATTR_PEER_MEASUREMENTS, 3114 3115 NL80211_ATTR_AIRTIME_WEIGHT, 3116 NL80211_ATTR_STA_TX_POWER_SETTING, 3117 NL80211_ATTR_STA_TX_POWER, 3118 3119 NL80211_ATTR_SAE_PASSWORD, 3120 3121 NL80211_ATTR_TWT_RESPONDER, 3122 3123 NL80211_ATTR_HE_OBSS_PD, 3124 3125 NL80211_ATTR_WIPHY_EDMG_CHANNELS, 3126 NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, 3127 3128 NL80211_ATTR_VLAN_ID, 3129 3130 NL80211_ATTR_HE_BSS_COLOR, 3131 3132 NL80211_ATTR_IFTYPE_AKM_SUITES, 3133 3134 NL80211_ATTR_TID_CONFIG, 3135 3136 NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, 3137 3138 NL80211_ATTR_PMK_LIFETIME, 3139 NL80211_ATTR_PMK_REAUTH_THRESHOLD, 3140 3141 NL80211_ATTR_RECEIVE_MULTICAST, 3142 NL80211_ATTR_WIPHY_FREQ_OFFSET, 3143 NL80211_ATTR_CENTER_FREQ1_OFFSET, 3144 NL80211_ATTR_SCAN_FREQ_KHZ, 3145 3146 NL80211_ATTR_HE_6GHZ_CAPABILITY, 3147 3148 NL80211_ATTR_FILS_DISCOVERY, 3149 3150 NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, 3151 3152 NL80211_ATTR_S1G_CAPABILITY, 3153 NL80211_ATTR_S1G_CAPABILITY_MASK, 3154 3155 NL80211_ATTR_SAE_PWE, 3156 3157 NL80211_ATTR_RECONNECT_REQUESTED, 3158 3159 NL80211_ATTR_SAR_SPEC, 3160 3161 NL80211_ATTR_DISABLE_HE, 3162 3163 NL80211_ATTR_OBSS_COLOR_BITMAP, 3164 3165 NL80211_ATTR_COLOR_CHANGE_COUNT, 3166 NL80211_ATTR_COLOR_CHANGE_COLOR, 3167 NL80211_ATTR_COLOR_CHANGE_ELEMS, 3168 3169 NL80211_ATTR_MBSSID_CONFIG, 3170 NL80211_ATTR_MBSSID_ELEMS, 3171 3172 NL80211_ATTR_RADAR_BACKGROUND, 3173 3174 NL80211_ATTR_AP_SETTINGS_FLAGS, 3175 3176 NL80211_ATTR_EHT_CAPABILITY, 3177 3178 NL80211_ATTR_DISABLE_EHT, 3179 3180 /* add attributes here, update the policy in nl80211.c */ 3181 3182 __NL80211_ATTR_AFTER_LAST, 3183 NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, 3184 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 3185 }; 3186 3187 /* source-level API compatibility */ 3188 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION 3189 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG 3190 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER 3191 #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA 3192 #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON 3193 #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP 3194 3195 /* 3196 * Allow user space programs to use #ifdef on new attributes by defining them 3197 * here 3198 */ 3199 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT 3200 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY 3201 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES 3202 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS 3203 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ 3204 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE 3205 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE 3206 #define NL80211_ATTR_IE NL80211_ATTR_IE 3207 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR 3208 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE 3209 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME 3210 #define NL80211_ATTR_SSID NL80211_ATTR_SSID 3211 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE 3212 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE 3213 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE 3214 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP 3215 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS 3216 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES 3217 #define NL80211_ATTR_KEY NL80211_ATTR_KEY 3218 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS 3219 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 3220 3221 #define NL80211_WIPHY_NAME_MAXLEN 64 3222 3223 #define NL80211_MAX_SUPP_RATES 32 3224 #define NL80211_MAX_SUPP_HT_RATES 77 3225 #define NL80211_MAX_SUPP_REG_RULES 128 3226 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 3227 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 3228 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 3229 #define NL80211_HT_CAPABILITY_LEN 26 3230 #define NL80211_VHT_CAPABILITY_LEN 12 3231 #define NL80211_HE_MIN_CAPABILITY_LEN 16 3232 #define NL80211_HE_MAX_CAPABILITY_LEN 54 3233 #define NL80211_MAX_NR_CIPHER_SUITES 5 3234 #define NL80211_MAX_NR_AKM_SUITES 2 3235 #define NL80211_EHT_MIN_CAPABILITY_LEN 13 3236 #define NL80211_EHT_MAX_CAPABILITY_LEN 51 3237 3238 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 3239 3240 /* default RSSI threshold for scan results if none specified. */ 3241 #define NL80211_SCAN_RSSI_THOLD_OFF -300 3242 3243 #define NL80211_CQM_TXE_MAX_INTVL 1800 3244 3245 /** 3246 * enum nl80211_iftype - (virtual) interface types 3247 * 3248 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides 3249 * @NL80211_IFTYPE_ADHOC: independent BSS member 3250 * @NL80211_IFTYPE_STATION: managed BSS member 3251 * @NL80211_IFTYPE_AP: access point 3252 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces 3253 * are a bit special in that they must always be tied to a pre-existing 3254 * AP type interface. 3255 * @NL80211_IFTYPE_WDS: wireless distribution interface 3256 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames 3257 * @NL80211_IFTYPE_MESH_POINT: mesh point 3258 * @NL80211_IFTYPE_P2P_CLIENT: P2P client 3259 * @NL80211_IFTYPE_P2P_GO: P2P group owner 3260 * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev 3261 * and therefore can't be created in the normal ways, use the 3262 * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE 3263 * commands to create and destroy one 3264 * @NL80211_IFTYPE_OCB: Outside Context of a BSS 3265 * This mode corresponds to the MIB variable dot11OCBActivated=true 3266 * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) 3267 * @NL80211_IFTYPE_MAX: highest interface type number currently defined 3268 * @NUM_NL80211_IFTYPES: number of defined interface types 3269 * 3270 * These values are used with the %NL80211_ATTR_IFTYPE 3271 * to set the type of an interface. 3272 * 3273 */ 3274 enum nl80211_iftype { 3275 NL80211_IFTYPE_UNSPECIFIED, 3276 NL80211_IFTYPE_ADHOC, 3277 NL80211_IFTYPE_STATION, 3278 NL80211_IFTYPE_AP, 3279 NL80211_IFTYPE_AP_VLAN, 3280 NL80211_IFTYPE_WDS, 3281 NL80211_IFTYPE_MONITOR, 3282 NL80211_IFTYPE_MESH_POINT, 3283 NL80211_IFTYPE_P2P_CLIENT, 3284 NL80211_IFTYPE_P2P_GO, 3285 NL80211_IFTYPE_P2P_DEVICE, 3286 NL80211_IFTYPE_OCB, 3287 NL80211_IFTYPE_NAN, 3288 3289 /* keep last */ 3290 NUM_NL80211_IFTYPES, 3291 NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 3292 }; 3293 3294 /** 3295 * enum nl80211_sta_flags - station flags 3296 * 3297 * Station flags. When a station is added to an AP interface, it is 3298 * assumed to be already associated (and hence authenticated.) 3299 * 3300 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved 3301 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) 3302 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames 3303 * with short barker preamble 3304 * @NL80211_STA_FLAG_WME: station is WME/QoS capable 3305 * @NL80211_STA_FLAG_MFP: station uses management frame protection 3306 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated 3307 * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should 3308 * only be used in managed mode (even in the flags mask). Note that the 3309 * flag can't be changed, it is only valid while adding a station, and 3310 * attempts to change it will silently be ignored (rather than rejected 3311 * as errors.) 3312 * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers 3313 * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a 3314 * previously added station into associated state 3315 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined 3316 * @__NL80211_STA_FLAG_AFTER_LAST: internal use 3317 */ 3318 enum nl80211_sta_flags { 3319 __NL80211_STA_FLAG_INVALID, 3320 NL80211_STA_FLAG_AUTHORIZED, 3321 NL80211_STA_FLAG_SHORT_PREAMBLE, 3322 NL80211_STA_FLAG_WME, 3323 NL80211_STA_FLAG_MFP, 3324 NL80211_STA_FLAG_AUTHENTICATED, 3325 NL80211_STA_FLAG_TDLS_PEER, 3326 NL80211_STA_FLAG_ASSOCIATED, 3327 3328 /* keep last */ 3329 __NL80211_STA_FLAG_AFTER_LAST, 3330 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 3331 }; 3332 3333 /** 3334 * enum nl80211_sta_p2p_ps_status - station support of P2P PS 3335 * 3336 * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism 3337 * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism 3338 * @NUM_NL80211_P2P_PS_STATUS: number of values 3339 */ 3340 enum nl80211_sta_p2p_ps_status { 3341 NL80211_P2P_PS_UNSUPPORTED = 0, 3342 NL80211_P2P_PS_SUPPORTED, 3343 3344 NUM_NL80211_P2P_PS_STATUS, 3345 }; 3346 3347 #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER 3348 3349 /** 3350 * struct nl80211_sta_flag_update - station flags mask/set 3351 * @mask: mask of station flags to set 3352 * @set: which values to set them to 3353 * 3354 * Both mask and set contain bits as per &enum nl80211_sta_flags. 3355 */ 3356 struct nl80211_sta_flag_update { 3357 __u32 mask; 3358 __u32 set; 3359 } __attribute__((packed)); 3360 3361 /** 3362 * enum nl80211_he_gi - HE guard interval 3363 * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec 3364 * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec 3365 * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec 3366 */ 3367 enum nl80211_he_gi { 3368 NL80211_RATE_INFO_HE_GI_0_8, 3369 NL80211_RATE_INFO_HE_GI_1_6, 3370 NL80211_RATE_INFO_HE_GI_3_2, 3371 }; 3372 3373 /** 3374 * enum nl80211_he_ltf - HE long training field 3375 * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec 3376 * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec 3377 * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec 3378 */ 3379 enum nl80211_he_ltf { 3380 NL80211_RATE_INFO_HE_1XLTF, 3381 NL80211_RATE_INFO_HE_2XLTF, 3382 NL80211_RATE_INFO_HE_4XLTF, 3383 }; 3384 3385 /** 3386 * enum nl80211_he_ru_alloc - HE RU allocation values 3387 * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation 3388 * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation 3389 * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation 3390 * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation 3391 * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation 3392 * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation 3393 * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation 3394 */ 3395 enum nl80211_he_ru_alloc { 3396 NL80211_RATE_INFO_HE_RU_ALLOC_26, 3397 NL80211_RATE_INFO_HE_RU_ALLOC_52, 3398 NL80211_RATE_INFO_HE_RU_ALLOC_106, 3399 NL80211_RATE_INFO_HE_RU_ALLOC_242, 3400 NL80211_RATE_INFO_HE_RU_ALLOC_484, 3401 NL80211_RATE_INFO_HE_RU_ALLOC_996, 3402 NL80211_RATE_INFO_HE_RU_ALLOC_2x996, 3403 }; 3404 3405 /** 3406 * enum nl80211_eht_gi - EHT guard interval 3407 * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec 3408 * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec 3409 * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec 3410 */ 3411 enum nl80211_eht_gi { 3412 NL80211_RATE_INFO_EHT_GI_0_8, 3413 NL80211_RATE_INFO_EHT_GI_1_6, 3414 NL80211_RATE_INFO_EHT_GI_3_2, 3415 }; 3416 3417 /** 3418 * enum nl80211_eht_ru_alloc - EHT RU allocation values 3419 * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation 3420 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation 3421 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation 3422 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation 3423 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation 3424 * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation 3425 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation 3426 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation 3427 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation 3428 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation 3429 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation 3430 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation 3431 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation 3432 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation 3433 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation 3434 * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation 3435 */ 3436 enum nl80211_eht_ru_alloc { 3437 NL80211_RATE_INFO_EHT_RU_ALLOC_26, 3438 NL80211_RATE_INFO_EHT_RU_ALLOC_52, 3439 NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, 3440 NL80211_RATE_INFO_EHT_RU_ALLOC_106, 3441 NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, 3442 NL80211_RATE_INFO_EHT_RU_ALLOC_242, 3443 NL80211_RATE_INFO_EHT_RU_ALLOC_484, 3444 NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, 3445 NL80211_RATE_INFO_EHT_RU_ALLOC_996, 3446 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, 3447 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, 3448 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, 3449 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, 3450 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, 3451 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, 3452 NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, 3453 }; 3454 3455 /** 3456 * enum nl80211_rate_info - bitrate information 3457 * 3458 * These attribute types are used with %NL80211_STA_INFO_TXRATE 3459 * when getting information about the bitrate of a station. 3460 * There are 2 attributes for bitrate, a legacy one that represents 3461 * a 16-bit value, and new one that represents a 32-bit value. 3462 * If the rate value fits into 16 bit, both attributes are reported 3463 * with the same value. If the rate is too high to fit into 16 bits 3464 * (>6.5535Gbps) only 32-bit attribute is included. 3465 * User space tools encouraged to use the 32-bit attribute and fall 3466 * back to the 16-bit one for compatibility with older kernels. 3467 * 3468 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved 3469 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) 3470 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) 3471 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate 3472 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval 3473 * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) 3474 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined 3475 * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) 3476 * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) 3477 * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate 3478 * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the 3479 * same as 160 for purposes of the bitrates 3480 * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate 3481 * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is 3482 * a legacy rate and will be reported as the actual bitrate, i.e. 3483 * half the base (20 MHz) rate 3484 * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is 3485 * a legacy rate and will be reported as the actual bitrate, i.e. 3486 * a quarter of the base (20 MHz) rate 3487 * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) 3488 * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) 3489 * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier 3490 * (u8, see &enum nl80211_he_gi) 3491 * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) 3492 * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then 3493 * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) 3494 * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate 3495 * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) 3496 * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) 3497 * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier 3498 * (u8, see &enum nl80211_eht_gi) 3499 * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then 3500 * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) 3501 * @__NL80211_RATE_INFO_AFTER_LAST: internal use 3502 */ 3503 enum nl80211_rate_info { 3504 __NL80211_RATE_INFO_INVALID, 3505 NL80211_RATE_INFO_BITRATE, 3506 NL80211_RATE_INFO_MCS, 3507 NL80211_RATE_INFO_40_MHZ_WIDTH, 3508 NL80211_RATE_INFO_SHORT_GI, 3509 NL80211_RATE_INFO_BITRATE32, 3510 NL80211_RATE_INFO_VHT_MCS, 3511 NL80211_RATE_INFO_VHT_NSS, 3512 NL80211_RATE_INFO_80_MHZ_WIDTH, 3513 NL80211_RATE_INFO_80P80_MHZ_WIDTH, 3514 NL80211_RATE_INFO_160_MHZ_WIDTH, 3515 NL80211_RATE_INFO_10_MHZ_WIDTH, 3516 NL80211_RATE_INFO_5_MHZ_WIDTH, 3517 NL80211_RATE_INFO_HE_MCS, 3518 NL80211_RATE_INFO_HE_NSS, 3519 NL80211_RATE_INFO_HE_GI, 3520 NL80211_RATE_INFO_HE_DCM, 3521 NL80211_RATE_INFO_HE_RU_ALLOC, 3522 NL80211_RATE_INFO_320_MHZ_WIDTH, 3523 NL80211_RATE_INFO_EHT_MCS, 3524 NL80211_RATE_INFO_EHT_NSS, 3525 NL80211_RATE_INFO_EHT_GI, 3526 NL80211_RATE_INFO_EHT_RU_ALLOC, 3527 3528 /* keep last */ 3529 __NL80211_RATE_INFO_AFTER_LAST, 3530 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 3531 }; 3532 3533 /** 3534 * enum nl80211_sta_bss_param - BSS information collected by STA 3535 * 3536 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM 3537 * when getting information about the bitrate of a station. 3538 * 3539 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved 3540 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) 3541 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled 3542 * (flag) 3543 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled 3544 * (flag) 3545 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) 3546 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) 3547 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined 3548 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use 3549 */ 3550 enum nl80211_sta_bss_param { 3551 __NL80211_STA_BSS_PARAM_INVALID, 3552 NL80211_STA_BSS_PARAM_CTS_PROT, 3553 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, 3554 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, 3555 NL80211_STA_BSS_PARAM_DTIM_PERIOD, 3556 NL80211_STA_BSS_PARAM_BEACON_INTERVAL, 3557 3558 /* keep last */ 3559 __NL80211_STA_BSS_PARAM_AFTER_LAST, 3560 NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 3561 }; 3562 3563 /** 3564 * enum nl80211_sta_info - station information 3565 * 3566 * These attribute types are used with %NL80211_ATTR_STA_INFO 3567 * when getting information about a station. 3568 * 3569 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved 3570 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) 3571 * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) 3572 * (u32, from this station) 3573 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) 3574 * (u32, to this station) 3575 * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) 3576 * (u64, from this station) 3577 * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) 3578 * (u64, to this station) 3579 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) 3580 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute 3581 * containing info as possible, see &enum nl80211_rate_info 3582 * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) 3583 * (u32, from this station) 3584 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) 3585 * (u32, to this station) 3586 * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) 3587 * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) 3588 * (u32, to this station) 3589 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) 3590 * @NL80211_STA_INFO_LLID: the station's mesh LLID 3591 * @NL80211_STA_INFO_PLID: the station's mesh PLID 3592 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station 3593 * (see %enum nl80211_plink_state) 3594 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested 3595 * attribute, like NL80211_STA_INFO_TX_BITRATE. 3596 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute 3597 * containing info as possible, see &enum nl80211_sta_bss_param 3598 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected 3599 * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. 3600 * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) 3601 * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) 3602 * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode 3603 * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode 3604 * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards 3605 * non-peer STA 3606 * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU 3607 * Contains a nested array of signal strength attributes (u8, dBm) 3608 * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average 3609 * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. 3610 * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the 3611 * 802.11 header (u32, kbps) 3612 * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons 3613 * (u64) 3614 * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) 3615 * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average 3616 * for beacons only (u8, dBm) 3617 * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) 3618 * This is a nested attribute where each the inner attribute number is the 3619 * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; 3620 * each one of those is again nested with &enum nl80211_tid_stats 3621 * attributes carrying the actual values. 3622 * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames 3623 * received from the station (u64, usec) 3624 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment 3625 * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) 3626 * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) 3627 * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) 3628 * (u32, from this station) 3629 * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received 3630 * with an FCS error (u32, from this station). This count may not include 3631 * some packets with an FCS error due to TA corruption. Hence this counter 3632 * might not be fully accurate. 3633 * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a 3634 * mesh gate (u8, 0 or 1) 3635 * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames 3636 * sent to the station (u64, usec) 3637 * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) 3638 * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station 3639 * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) 3640 * of STA's association 3641 * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a 3642 * authentication server (u8, 0 or 1) 3643 * @__NL80211_STA_INFO_AFTER_LAST: internal 3644 * @NL80211_STA_INFO_MAX: highest possible station info attribute 3645 */ 3646 enum nl80211_sta_info { 3647 __NL80211_STA_INFO_INVALID, 3648 NL80211_STA_INFO_INACTIVE_TIME, 3649 NL80211_STA_INFO_RX_BYTES, 3650 NL80211_STA_INFO_TX_BYTES, 3651 NL80211_STA_INFO_LLID, 3652 NL80211_STA_INFO_PLID, 3653 NL80211_STA_INFO_PLINK_STATE, 3654 NL80211_STA_INFO_SIGNAL, 3655 NL80211_STA_INFO_TX_BITRATE, 3656 NL80211_STA_INFO_RX_PACKETS, 3657 NL80211_STA_INFO_TX_PACKETS, 3658 NL80211_STA_INFO_TX_RETRIES, 3659 NL80211_STA_INFO_TX_FAILED, 3660 NL80211_STA_INFO_SIGNAL_AVG, 3661 NL80211_STA_INFO_RX_BITRATE, 3662 NL80211_STA_INFO_BSS_PARAM, 3663 NL80211_STA_INFO_CONNECTED_TIME, 3664 NL80211_STA_INFO_STA_FLAGS, 3665 NL80211_STA_INFO_BEACON_LOSS, 3666 NL80211_STA_INFO_T_OFFSET, 3667 NL80211_STA_INFO_LOCAL_PM, 3668 NL80211_STA_INFO_PEER_PM, 3669 NL80211_STA_INFO_NONPEER_PM, 3670 NL80211_STA_INFO_RX_BYTES64, 3671 NL80211_STA_INFO_TX_BYTES64, 3672 NL80211_STA_INFO_CHAIN_SIGNAL, 3673 NL80211_STA_INFO_CHAIN_SIGNAL_AVG, 3674 NL80211_STA_INFO_EXPECTED_THROUGHPUT, 3675 NL80211_STA_INFO_RX_DROP_MISC, 3676 NL80211_STA_INFO_BEACON_RX, 3677 NL80211_STA_INFO_BEACON_SIGNAL_AVG, 3678 NL80211_STA_INFO_TID_STATS, 3679 NL80211_STA_INFO_RX_DURATION, 3680 NL80211_STA_INFO_PAD, 3681 NL80211_STA_INFO_ACK_SIGNAL, 3682 NL80211_STA_INFO_ACK_SIGNAL_AVG, 3683 NL80211_STA_INFO_RX_MPDUS, 3684 NL80211_STA_INFO_FCS_ERROR_COUNT, 3685 NL80211_STA_INFO_CONNECTED_TO_GATE, 3686 NL80211_STA_INFO_TX_DURATION, 3687 NL80211_STA_INFO_AIRTIME_WEIGHT, 3688 NL80211_STA_INFO_AIRTIME_LINK_METRIC, 3689 NL80211_STA_INFO_ASSOC_AT_BOOTTIME, 3690 NL80211_STA_INFO_CONNECTED_TO_AS, 3691 3692 /* keep last */ 3693 __NL80211_STA_INFO_AFTER_LAST, 3694 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 3695 }; 3696 3697 /* we renamed this - stay compatible */ 3698 #define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG 3699 3700 3701 /** 3702 * enum nl80211_tid_stats - per TID statistics attributes 3703 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved 3704 * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) 3705 * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or 3706 * attempted to transmit; u64) 3707 * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for 3708 * transmitted MSDUs (not counting the first attempt; u64) 3709 * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted 3710 * MSDUs (u64) 3711 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment 3712 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) 3713 * @NUM_NL80211_TID_STATS: number of attributes here 3714 * @NL80211_TID_STATS_MAX: highest numbered attribute here 3715 */ 3716 enum nl80211_tid_stats { 3717 __NL80211_TID_STATS_INVALID, 3718 NL80211_TID_STATS_RX_MSDU, 3719 NL80211_TID_STATS_TX_MSDU, 3720 NL80211_TID_STATS_TX_MSDU_RETRIES, 3721 NL80211_TID_STATS_TX_MSDU_FAILED, 3722 NL80211_TID_STATS_PAD, 3723 NL80211_TID_STATS_TXQ_STATS, 3724 3725 /* keep last */ 3726 NUM_NL80211_TID_STATS, 3727 NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 3728 }; 3729 3730 /** 3731 * enum nl80211_txq_stats - per TXQ statistics attributes 3732 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved 3733 * @NUM_NL80211_TXQ_STATS: number of attributes here 3734 * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged 3735 * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently 3736 * backlogged 3737 * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen 3738 * @NL80211_TXQ_STATS_DROPS: total number of packet drops 3739 * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks 3740 * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow 3741 * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow 3742 * (only for per-phy stats) 3743 * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions 3744 * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ 3745 * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ 3746 * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY 3747 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here 3748 */ 3749 enum nl80211_txq_stats { 3750 __NL80211_TXQ_STATS_INVALID, 3751 NL80211_TXQ_STATS_BACKLOG_BYTES, 3752 NL80211_TXQ_STATS_BACKLOG_PACKETS, 3753 NL80211_TXQ_STATS_FLOWS, 3754 NL80211_TXQ_STATS_DROPS, 3755 NL80211_TXQ_STATS_ECN_MARKS, 3756 NL80211_TXQ_STATS_OVERLIMIT, 3757 NL80211_TXQ_STATS_OVERMEMORY, 3758 NL80211_TXQ_STATS_COLLISIONS, 3759 NL80211_TXQ_STATS_TX_BYTES, 3760 NL80211_TXQ_STATS_TX_PACKETS, 3761 NL80211_TXQ_STATS_MAX_FLOWS, 3762 3763 /* keep last */ 3764 NUM_NL80211_TXQ_STATS, 3765 NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 3766 }; 3767 3768 /** 3769 * enum nl80211_mpath_flags - nl80211 mesh path flags 3770 * 3771 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active 3772 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running 3773 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN 3774 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set 3775 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded 3776 */ 3777 enum nl80211_mpath_flags { 3778 NL80211_MPATH_FLAG_ACTIVE = 1<<0, 3779 NL80211_MPATH_FLAG_RESOLVING = 1<<1, 3780 NL80211_MPATH_FLAG_SN_VALID = 1<<2, 3781 NL80211_MPATH_FLAG_FIXED = 1<<3, 3782 NL80211_MPATH_FLAG_RESOLVED = 1<<4, 3783 }; 3784 3785 /** 3786 * enum nl80211_mpath_info - mesh path information 3787 * 3788 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting 3789 * information about a mesh path. 3790 * 3791 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved 3792 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination 3793 * @NL80211_MPATH_INFO_SN: destination sequence number 3794 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path 3795 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now 3796 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in 3797 * &enum nl80211_mpath_flags; 3798 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec 3799 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries 3800 * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination 3801 * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination 3802 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number 3803 * currently defined 3804 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use 3805 */ 3806 enum nl80211_mpath_info { 3807 __NL80211_MPATH_INFO_INVALID, 3808 NL80211_MPATH_INFO_FRAME_QLEN, 3809 NL80211_MPATH_INFO_SN, 3810 NL80211_MPATH_INFO_METRIC, 3811 NL80211_MPATH_INFO_EXPTIME, 3812 NL80211_MPATH_INFO_FLAGS, 3813 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, 3814 NL80211_MPATH_INFO_DISCOVERY_RETRIES, 3815 NL80211_MPATH_INFO_HOP_COUNT, 3816 NL80211_MPATH_INFO_PATH_CHANGE, 3817 3818 /* keep last */ 3819 __NL80211_MPATH_INFO_AFTER_LAST, 3820 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 3821 }; 3822 3823 /** 3824 * enum nl80211_band_iftype_attr - Interface type data attributes 3825 * 3826 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved 3827 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute 3828 * for each interface type that supports the band data 3829 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE 3830 * capabilities IE 3831 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE 3832 * capabilities IE 3833 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE 3834 * capabilities IE 3835 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as 3836 * defined in HE capabilities IE 3837 * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), 3838 * given for all 6 GHz band channels 3839 * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are 3840 * advertised on this band/for this iftype (binary) 3841 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT 3842 * capabilities element 3843 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT 3844 * capabilities element 3845 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT 3846 * capabilities element 3847 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as 3848 * defined in EHT capabilities element 3849 * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use 3850 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined 3851 */ 3852 enum nl80211_band_iftype_attr { 3853 __NL80211_BAND_IFTYPE_ATTR_INVALID, 3854 3855 NL80211_BAND_IFTYPE_ATTR_IFTYPES, 3856 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, 3857 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, 3858 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, 3859 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, 3860 NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, 3861 NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, 3862 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, 3863 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, 3864 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, 3865 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, 3866 3867 /* keep last */ 3868 __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, 3869 NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 3870 }; 3871 3872 /** 3873 * enum nl80211_band_attr - band attributes 3874 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved 3875 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, 3876 * an array of nested frequency attributes 3877 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, 3878 * an array of nested bitrate attributes 3879 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as 3880 * defined in 802.11n 3881 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE 3882 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n 3883 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n 3884 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as 3885 * defined in 802.11ac 3886 * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE 3887 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using 3888 * attributes from &enum nl80211_band_iftype_attr 3889 * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 3890 * channel(s) that are allowed to be used for EDMG transmissions. 3891 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. 3892 * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 3893 * the allowed channel bandwidth configurations. 3894 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 3895 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined 3896 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use 3897 */ 3898 enum nl80211_band_attr { 3899 __NL80211_BAND_ATTR_INVALID, 3900 NL80211_BAND_ATTR_FREQS, 3901 NL80211_BAND_ATTR_RATES, 3902 3903 NL80211_BAND_ATTR_HT_MCS_SET, 3904 NL80211_BAND_ATTR_HT_CAPA, 3905 NL80211_BAND_ATTR_HT_AMPDU_FACTOR, 3906 NL80211_BAND_ATTR_HT_AMPDU_DENSITY, 3907 3908 NL80211_BAND_ATTR_VHT_MCS_SET, 3909 NL80211_BAND_ATTR_VHT_CAPA, 3910 NL80211_BAND_ATTR_IFTYPE_DATA, 3911 3912 NL80211_BAND_ATTR_EDMG_CHANNELS, 3913 NL80211_BAND_ATTR_EDMG_BW_CONFIG, 3914 3915 /* keep last */ 3916 __NL80211_BAND_ATTR_AFTER_LAST, 3917 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 3918 }; 3919 3920 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA 3921 3922 /** 3923 * enum nl80211_wmm_rule - regulatory wmm rule 3924 * 3925 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved 3926 * @NL80211_WMMR_CW_MIN: Minimum contention window slot. 3927 * @NL80211_WMMR_CW_MAX: Maximum contention window slot. 3928 * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. 3929 * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. 3930 * @nl80211_WMMR_MAX: highest possible wmm rule. 3931 * @__NL80211_WMMR_LAST: Internal use. 3932 */ 3933 enum nl80211_wmm_rule { 3934 __NL80211_WMMR_INVALID, 3935 NL80211_WMMR_CW_MIN, 3936 NL80211_WMMR_CW_MAX, 3937 NL80211_WMMR_AIFSN, 3938 NL80211_WMMR_TXOP, 3939 3940 /* keep last */ 3941 __NL80211_WMMR_LAST, 3942 NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 3943 }; 3944 3945 /** 3946 * enum nl80211_frequency_attr - frequency attributes 3947 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved 3948 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz 3949 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current 3950 * regulatory domain. 3951 * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation 3952 * are permitted on this channel, this includes sending probe 3953 * requests, or modes of operation that require beaconing. 3954 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory 3955 * on this channel in current regulatory domain. 3956 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm 3957 * (100 * dBm). 3958 * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS 3959 * (enum nl80211_dfs_state) 3960 * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long 3961 * this channel is in this DFS state. 3962 * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this 3963 * channel as the control channel 3964 * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this 3965 * channel as the control channel 3966 * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel 3967 * as the primary or any of the secondary channels isn't possible, 3968 * this includes 80+80 channels 3969 * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel 3970 * using this channel as the primary or any of the secondary channels 3971 * isn't possible 3972 * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 3973 * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this 3974 * channel. A channel that has the INDOOR_ONLY attribute can only be 3975 * used when there is a clear assessment that the device is operating in 3976 * an indoor surroundings, i.e., it is connected to AC power (and not 3977 * through portable DC inverters) or is under the control of a master 3978 * that is acting as an AP and is connected to AC power. 3979 * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this 3980 * channel if it's connected concurrently to a BSS on the same channel on 3981 * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz 3982 * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS 3983 * off-channel on a channel that has the IR_CONCURRENT attribute set can be 3984 * done when there is a clear assessment that the device is operating under 3985 * the guidance of an authorized master, i.e., setting up a GO or TDLS 3986 * off-channel while the device is also connected to an AP with DFS and 3987 * radar detection on the UNII band (it is up to user-space, i.e., 3988 * wpa_supplicant to perform the required verifications). Using this 3989 * attribute for IR is disallowed for master interfaces (IBSS, AP). 3990 * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed 3991 * on this channel in current regulatory domain. 3992 * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed 3993 * on this channel in current regulatory domain. 3994 * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. 3995 * This is a nested attribute that contains the wmm limitation per AC. 3996 * (see &enum nl80211_wmm_rule) 3997 * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel 3998 * in current regulatory domain. 3999 * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz 4000 * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed 4001 * on this channel in current regulatory domain. 4002 * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed 4003 * on this channel in current regulatory domain. 4004 * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed 4005 * on this channel in current regulatory domain. 4006 * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed 4007 * on this channel in current regulatory domain. 4008 * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed 4009 * on this channel in current regulatory domain. 4010 * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel 4011 * as the primary or any of the secondary channels isn't possible 4012 * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel 4013 * in current regulatory domain. 4014 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number 4015 * currently defined 4016 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use 4017 * 4018 * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 4019 * for more information on the FCC description of the relaxations allowed 4020 * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and 4021 * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. 4022 */ 4023 enum nl80211_frequency_attr { 4024 __NL80211_FREQUENCY_ATTR_INVALID, 4025 NL80211_FREQUENCY_ATTR_FREQ, 4026 NL80211_FREQUENCY_ATTR_DISABLED, 4027 NL80211_FREQUENCY_ATTR_NO_IR, 4028 __NL80211_FREQUENCY_ATTR_NO_IBSS, 4029 NL80211_FREQUENCY_ATTR_RADAR, 4030 NL80211_FREQUENCY_ATTR_MAX_TX_POWER, 4031 NL80211_FREQUENCY_ATTR_DFS_STATE, 4032 NL80211_FREQUENCY_ATTR_DFS_TIME, 4033 NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, 4034 NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, 4035 NL80211_FREQUENCY_ATTR_NO_80MHZ, 4036 NL80211_FREQUENCY_ATTR_NO_160MHZ, 4037 NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, 4038 NL80211_FREQUENCY_ATTR_INDOOR_ONLY, 4039 NL80211_FREQUENCY_ATTR_IR_CONCURRENT, 4040 NL80211_FREQUENCY_ATTR_NO_20MHZ, 4041 NL80211_FREQUENCY_ATTR_NO_10MHZ, 4042 NL80211_FREQUENCY_ATTR_WMM, 4043 NL80211_FREQUENCY_ATTR_NO_HE, 4044 NL80211_FREQUENCY_ATTR_OFFSET, 4045 NL80211_FREQUENCY_ATTR_1MHZ, 4046 NL80211_FREQUENCY_ATTR_2MHZ, 4047 NL80211_FREQUENCY_ATTR_4MHZ, 4048 NL80211_FREQUENCY_ATTR_8MHZ, 4049 NL80211_FREQUENCY_ATTR_16MHZ, 4050 NL80211_FREQUENCY_ATTR_NO_320MHZ, 4051 NL80211_FREQUENCY_ATTR_NO_EHT, 4052 4053 /* keep last */ 4054 __NL80211_FREQUENCY_ATTR_AFTER_LAST, 4055 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 4056 }; 4057 4058 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER 4059 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR 4060 #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR 4061 #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR 4062 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ 4063 NL80211_FREQUENCY_ATTR_IR_CONCURRENT 4064 4065 /** 4066 * enum nl80211_bitrate_attr - bitrate attributes 4067 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved 4068 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps 4069 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported 4070 * in 2.4 GHz band. 4071 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number 4072 * currently defined 4073 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use 4074 */ 4075 enum nl80211_bitrate_attr { 4076 __NL80211_BITRATE_ATTR_INVALID, 4077 NL80211_BITRATE_ATTR_RATE, 4078 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, 4079 4080 /* keep last */ 4081 __NL80211_BITRATE_ATTR_AFTER_LAST, 4082 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 4083 }; 4084 4085 /** 4086 * enum nl80211_initiator - Indicates the initiator of a reg domain request 4087 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world 4088 * regulatory domain. 4089 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the 4090 * regulatory domain. 4091 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the 4092 * wireless core it thinks its knows the regulatory domain we should be in. 4093 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 4094 * 802.11 country information element with regulatory information it 4095 * thinks we should consider. cfg80211 only processes the country 4096 * code from the IE, and relies on the regulatory domain information 4097 * structure passed by userspace (CRDA) from our wireless-regdb. 4098 * If a channel is enabled but the country code indicates it should 4099 * be disabled we disable the channel and re-enable it upon disassociation. 4100 */ 4101 enum nl80211_reg_initiator { 4102 NL80211_REGDOM_SET_BY_CORE, 4103 NL80211_REGDOM_SET_BY_USER, 4104 NL80211_REGDOM_SET_BY_DRIVER, 4105 NL80211_REGDOM_SET_BY_COUNTRY_IE, 4106 }; 4107 4108 /** 4109 * enum nl80211_reg_type - specifies the type of regulatory domain 4110 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains 4111 * to a specific country. When this is set you can count on the 4112 * ISO / IEC 3166 alpha2 country code being valid. 4113 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory 4114 * domain. 4115 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom 4116 * driver specific world regulatory domain. These do not apply system-wide 4117 * and are only applicable to the individual devices which have requested 4118 * them to be applied. 4119 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product 4120 * of an intersection between two regulatory domains -- the previously 4121 * set regulatory domain on the system and the last accepted regulatory 4122 * domain request to be processed. 4123 */ 4124 enum nl80211_reg_type { 4125 NL80211_REGDOM_TYPE_COUNTRY, 4126 NL80211_REGDOM_TYPE_WORLD, 4127 NL80211_REGDOM_TYPE_CUSTOM_WORLD, 4128 NL80211_REGDOM_TYPE_INTERSECTION, 4129 }; 4130 4131 /** 4132 * enum nl80211_reg_rule_attr - regulatory rule attributes 4133 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved 4134 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional 4135 * considerations for a given frequency range. These are the 4136 * &enum nl80211_reg_rule_flags. 4137 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory 4138 * rule in KHz. This is not a center of frequency but an actual regulatory 4139 * band edge. 4140 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule 4141 * in KHz. This is not a center a frequency but an actual regulatory 4142 * band edge. 4143 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this 4144 * frequency range, in KHz. 4145 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain 4146 * for a given frequency range. The value is in mBi (100 * dBi). 4147 * If you don't have one then don't send this. 4148 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for 4149 * a given frequency range. The value is in mBm (100 * dBm). 4150 * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 4151 * If not present or 0 default CAC time will be used. 4152 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number 4153 * currently defined 4154 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use 4155 */ 4156 enum nl80211_reg_rule_attr { 4157 __NL80211_REG_RULE_ATTR_INVALID, 4158 NL80211_ATTR_REG_RULE_FLAGS, 4159 4160 NL80211_ATTR_FREQ_RANGE_START, 4161 NL80211_ATTR_FREQ_RANGE_END, 4162 NL80211_ATTR_FREQ_RANGE_MAX_BW, 4163 4164 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, 4165 NL80211_ATTR_POWER_RULE_MAX_EIRP, 4166 4167 NL80211_ATTR_DFS_CAC_TIME, 4168 4169 /* keep last */ 4170 __NL80211_REG_RULE_ATTR_AFTER_LAST, 4171 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 4172 }; 4173 4174 /** 4175 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes 4176 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved 4177 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, 4178 * only report BSS with matching SSID. 4179 * (This cannot be used together with BSSID.) 4180 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a 4181 * BSS in scan results. Filtering is turned off if not specified. Note that 4182 * if this attribute is in a match set of its own, then it is treated as 4183 * the default value for all matchsets with an SSID, rather than being a 4184 * matchset of its own without an RSSI filter. This is due to problems with 4185 * how this API was implemented in the past. Also, due to the same problem, 4186 * the only way to create a matchset with only an RSSI filter (with this 4187 * attribute) is if there's only a single matchset with the RSSI attribute. 4188 * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether 4189 * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or 4190 * relative to current bss's RSSI. 4191 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for 4192 * BSS-es in the specified band is to be adjusted before doing 4193 * RSSI-based BSS selection. The attribute value is a packed structure 4194 * value as specified by &struct nl80211_bss_select_rssi_adjust. 4195 * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching 4196 * (this cannot be used together with SSID). 4197 * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the 4198 * band specific minimum rssi thresholds for the bands defined in 4199 * enum nl80211_band. The minimum rssi threshold value(s32) specific to a 4200 * band shall be encapsulated in attribute with type value equals to one 4201 * of the NL80211_BAND_* defined in enum nl80211_band. For example, the 4202 * minimum rssi threshold value for 2.4GHZ band shall be encapsulated 4203 * within an attribute of type NL80211_BAND_2GHZ. And one or more of such 4204 * attributes will be nested within this attribute. 4205 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter 4206 * attribute number currently defined 4207 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use 4208 */ 4209 enum nl80211_sched_scan_match_attr { 4210 __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, 4211 4212 NL80211_SCHED_SCAN_MATCH_ATTR_SSID, 4213 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, 4214 NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, 4215 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, 4216 NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, 4217 NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, 4218 4219 /* keep last */ 4220 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, 4221 NL80211_SCHED_SCAN_MATCH_ATTR_MAX = 4222 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 4223 }; 4224 4225 /* only for backward compatibility */ 4226 #define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID 4227 4228 /** 4229 * enum nl80211_reg_rule_flags - regulatory rule flags 4230 * 4231 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed 4232 * @NL80211_RRF_NO_CCK: CCK modulation not allowed 4233 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed 4234 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed 4235 * @NL80211_RRF_DFS: DFS support is required to be used 4236 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links 4237 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links 4238 * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, 4239 * this includes probe requests or modes of operation that require 4240 * beaconing. 4241 * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated 4242 * base on contiguous rules and wider channels will be allowed to cross 4243 * multiple contiguous/overlapping frequency ranges. 4244 * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT 4245 * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation 4246 * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation 4247 * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed 4248 * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed 4249 * @NL80211_RRF_NO_HE: HE operation not allowed 4250 * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed 4251 */ 4252 enum nl80211_reg_rule_flags { 4253 NL80211_RRF_NO_OFDM = 1<<0, 4254 NL80211_RRF_NO_CCK = 1<<1, 4255 NL80211_RRF_NO_INDOOR = 1<<2, 4256 NL80211_RRF_NO_OUTDOOR = 1<<3, 4257 NL80211_RRF_DFS = 1<<4, 4258 NL80211_RRF_PTP_ONLY = 1<<5, 4259 NL80211_RRF_PTMP_ONLY = 1<<6, 4260 NL80211_RRF_NO_IR = 1<<7, 4261 __NL80211_RRF_NO_IBSS = 1<<8, 4262 NL80211_RRF_AUTO_BW = 1<<11, 4263 NL80211_RRF_IR_CONCURRENT = 1<<12, 4264 NL80211_RRF_NO_HT40MINUS = 1<<13, 4265 NL80211_RRF_NO_HT40PLUS = 1<<14, 4266 NL80211_RRF_NO_80MHZ = 1<<15, 4267 NL80211_RRF_NO_160MHZ = 1<<16, 4268 NL80211_RRF_NO_HE = 1<<17, 4269 NL80211_RRF_NO_320MHZ = 1<<18, 4270 }; 4271 4272 #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR 4273 #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR 4274 #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR 4275 #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ 4276 NL80211_RRF_NO_HT40PLUS) 4277 #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT 4278 4279 /* For backport compatibility with older userspace */ 4280 #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) 4281 4282 /** 4283 * enum nl80211_dfs_regions - regulatory DFS regions 4284 * 4285 * @NL80211_DFS_UNSET: Country has no DFS master region specified 4286 * @NL80211_DFS_FCC: Country follows DFS master rules from FCC 4287 * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI 4288 * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec 4289 */ 4290 enum nl80211_dfs_regions { 4291 NL80211_DFS_UNSET = 0, 4292 NL80211_DFS_FCC = 1, 4293 NL80211_DFS_ETSI = 2, 4294 NL80211_DFS_JP = 3, 4295 }; 4296 4297 /** 4298 * enum nl80211_user_reg_hint_type - type of user regulatory hint 4299 * 4300 * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always 4301 * assumed if the attribute is not set. 4302 * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular 4303 * base station. Device drivers that have been tested to work 4304 * properly to support this type of hint can enable these hints 4305 * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature 4306 * capability on the struct wiphy. The wireless core will 4307 * ignore all cell base station hints until at least one device 4308 * present has been registered with the wireless core that 4309 * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a 4310 * supported feature. 4311 * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the 4312 * platform is operating in an indoor environment. 4313 */ 4314 enum nl80211_user_reg_hint_type { 4315 NL80211_USER_REG_HINT_USER = 0, 4316 NL80211_USER_REG_HINT_CELL_BASE = 1, 4317 NL80211_USER_REG_HINT_INDOOR = 2, 4318 }; 4319 4320 /** 4321 * enum nl80211_survey_info - survey information 4322 * 4323 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO 4324 * when getting information about a survey. 4325 * 4326 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved 4327 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel 4328 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) 4329 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used 4330 * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio 4331 * was turned on (on channel or globally) 4332 * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary 4333 * channel was sensed busy (either due to activity or energy detect) 4334 * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension 4335 * channel was sensed busy 4336 * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent 4337 * receiving data (on channel or globally) 4338 * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent 4339 * transmitting data (on channel or globally) 4340 * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan 4341 * (on this channel or globally) 4342 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment 4343 * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent 4344 * receiving frames destined to the local BSS 4345 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number 4346 * currently defined 4347 * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz 4348 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use 4349 */ 4350 enum nl80211_survey_info { 4351 __NL80211_SURVEY_INFO_INVALID, 4352 NL80211_SURVEY_INFO_FREQUENCY, 4353 NL80211_SURVEY_INFO_NOISE, 4354 NL80211_SURVEY_INFO_IN_USE, 4355 NL80211_SURVEY_INFO_TIME, 4356 NL80211_SURVEY_INFO_TIME_BUSY, 4357 NL80211_SURVEY_INFO_TIME_EXT_BUSY, 4358 NL80211_SURVEY_INFO_TIME_RX, 4359 NL80211_SURVEY_INFO_TIME_TX, 4360 NL80211_SURVEY_INFO_TIME_SCAN, 4361 NL80211_SURVEY_INFO_PAD, 4362 NL80211_SURVEY_INFO_TIME_BSS_RX, 4363 NL80211_SURVEY_INFO_FREQUENCY_OFFSET, 4364 4365 /* keep last */ 4366 __NL80211_SURVEY_INFO_AFTER_LAST, 4367 NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 4368 }; 4369 4370 /* keep old names for compatibility */ 4371 #define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME 4372 #define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY 4373 #define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY 4374 #define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX 4375 #define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX 4376 4377 /** 4378 * enum nl80211_mntr_flags - monitor configuration flags 4379 * 4380 * Monitor configuration flags. 4381 * 4382 * @__NL80211_MNTR_FLAG_INVALID: reserved 4383 * 4384 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS 4385 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP 4386 * @NL80211_MNTR_FLAG_CONTROL: pass control frames 4387 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering 4388 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. 4389 * overrides all other flags. 4390 * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address 4391 * and ACK incoming unicast packets. 4392 * 4393 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use 4394 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag 4395 */ 4396 enum nl80211_mntr_flags { 4397 __NL80211_MNTR_FLAG_INVALID, 4398 NL80211_MNTR_FLAG_FCSFAIL, 4399 NL80211_MNTR_FLAG_PLCPFAIL, 4400 NL80211_MNTR_FLAG_CONTROL, 4401 NL80211_MNTR_FLAG_OTHER_BSS, 4402 NL80211_MNTR_FLAG_COOK_FRAMES, 4403 NL80211_MNTR_FLAG_ACTIVE, 4404 4405 /* keep last */ 4406 __NL80211_MNTR_FLAG_AFTER_LAST, 4407 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 4408 }; 4409 4410 /** 4411 * enum nl80211_mesh_power_mode - mesh power save modes 4412 * 4413 * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is 4414 * not known or has not been set yet. 4415 * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is 4416 * in Awake state all the time. 4417 * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will 4418 * alternate between Active and Doze states, but will wake up for 4419 * neighbor's beacons. 4420 * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will 4421 * alternate between Active and Doze states, but may not wake up 4422 * for neighbor's beacons. 4423 * 4424 * @__NL80211_MESH_POWER_AFTER_LAST - internal use 4425 * @NL80211_MESH_POWER_MAX - highest possible power save level 4426 */ 4427 4428 enum nl80211_mesh_power_mode { 4429 NL80211_MESH_POWER_UNKNOWN, 4430 NL80211_MESH_POWER_ACTIVE, 4431 NL80211_MESH_POWER_LIGHT_SLEEP, 4432 NL80211_MESH_POWER_DEEP_SLEEP, 4433 4434 __NL80211_MESH_POWER_AFTER_LAST, 4435 NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 4436 }; 4437 4438 /** 4439 * enum nl80211_meshconf_params - mesh configuration parameters 4440 * 4441 * Mesh configuration parameters. These can be changed while the mesh is 4442 * active. 4443 * 4444 * @__NL80211_MESHCONF_INVALID: internal use 4445 * 4446 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in 4447 * millisecond units, used by the Peer Link Open message 4448 * 4449 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in 4450 * millisecond units, used by the peer link management to close a peer link 4451 * 4452 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in 4453 * millisecond units 4454 * 4455 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed 4456 * on this mesh interface 4457 * 4458 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link 4459 * open retries that can be sent to establish a new peer link instance in a 4460 * mesh 4461 * 4462 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh 4463 * point. 4464 * 4465 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open 4466 * peer links when we detect compatible mesh peers. Disabled if 4467 * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are 4468 * set. 4469 * 4470 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames 4471 * containing a PREQ that an MP can send to a particular destination (path 4472 * target) 4473 * 4474 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths 4475 * (in milliseconds) 4476 * 4477 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait 4478 * until giving up on a path discovery (in milliseconds) 4479 * 4480 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh 4481 * points receiving a PREQ shall consider the forwarding information from 4482 * the root to be valid. (TU = time unit) 4483 * 4484 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in 4485 * TUs) during which an MP can send only one action frame containing a PREQ 4486 * reference element 4487 * 4488 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) 4489 * that it takes for an HWMP information element to propagate across the 4490 * mesh 4491 * 4492 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not 4493 * 4494 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a 4495 * source mesh point for path selection elements. 4496 * 4497 * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between 4498 * root announcements are transmitted. 4499 * 4500 * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has 4501 * access to a broader network beyond the MBSS. This is done via Root 4502 * Announcement frames. 4503 * 4504 * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in 4505 * TUs) during which a mesh STA can send only one Action frame containing a 4506 * PERR element. 4507 * 4508 * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding 4509 * or forwarding entity (default is TRUE - forwarding entity) 4510 * 4511 * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the 4512 * threshold for average signal strength of candidate station to establish 4513 * a peer link. 4514 * 4515 * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors 4516 * to synchronize to for 11s default synchronization method 4517 * (see 11C.12.2.2) 4518 * 4519 * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. 4520 * 4521 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute 4522 * 4523 * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for 4524 * which mesh STAs receiving a proactive PREQ shall consider the forwarding 4525 * information to the root mesh STA to be valid. 4526 * 4527 * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between 4528 * proactive PREQs are transmitted. 4529 * 4530 * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time 4531 * (in TUs) during which a mesh STA can send only one Action frame 4532 * containing a PREQ element for root path confirmation. 4533 * 4534 * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. 4535 * type &enum nl80211_mesh_power_mode (u32) 4536 * 4537 * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) 4538 * 4539 * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've 4540 * established peering with for longer than this time (in seconds), then 4541 * remove it from the STA's list of peers. You may set this to 0 to disable 4542 * the removal of the STA. Default is 30 minutes. 4543 * 4544 * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA 4545 * will advertise that it is connected to a gate in the mesh formation 4546 * field. If left unset then the mesh formation field will only 4547 * advertise such if there is an active root mesh path. 4548 * 4549 * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. 4550 * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that 4551 * this might not be the optimal decision as a multi-hop route might be 4552 * better. So if using this setting you will likely also want to disable 4553 * dot11MeshForwarding and use another mesh routing protocol on top. 4554 * 4555 * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA 4556 * will advertise that it is connected to a authentication server 4557 * in the mesh formation field. 4558 * 4559 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use 4560 */ 4561 enum nl80211_meshconf_params { 4562 __NL80211_MESHCONF_INVALID, 4563 NL80211_MESHCONF_RETRY_TIMEOUT, 4564 NL80211_MESHCONF_CONFIRM_TIMEOUT, 4565 NL80211_MESHCONF_HOLDING_TIMEOUT, 4566 NL80211_MESHCONF_MAX_PEER_LINKS, 4567 NL80211_MESHCONF_MAX_RETRIES, 4568 NL80211_MESHCONF_TTL, 4569 NL80211_MESHCONF_AUTO_OPEN_PLINKS, 4570 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, 4571 NL80211_MESHCONF_PATH_REFRESH_TIME, 4572 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, 4573 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, 4574 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, 4575 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, 4576 NL80211_MESHCONF_HWMP_ROOTMODE, 4577 NL80211_MESHCONF_ELEMENT_TTL, 4578 NL80211_MESHCONF_HWMP_RANN_INTERVAL, 4579 NL80211_MESHCONF_GATE_ANNOUNCEMENTS, 4580 NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, 4581 NL80211_MESHCONF_FORWARDING, 4582 NL80211_MESHCONF_RSSI_THRESHOLD, 4583 NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, 4584 NL80211_MESHCONF_HT_OPMODE, 4585 NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, 4586 NL80211_MESHCONF_HWMP_ROOT_INTERVAL, 4587 NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, 4588 NL80211_MESHCONF_POWER_MODE, 4589 NL80211_MESHCONF_AWAKE_WINDOW, 4590 NL80211_MESHCONF_PLINK_TIMEOUT, 4591 NL80211_MESHCONF_CONNECTED_TO_GATE, 4592 NL80211_MESHCONF_NOLEARN, 4593 NL80211_MESHCONF_CONNECTED_TO_AS, 4594 4595 /* keep last */ 4596 __NL80211_MESHCONF_ATTR_AFTER_LAST, 4597 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 4598 }; 4599 4600 /** 4601 * enum nl80211_mesh_setup_params - mesh setup parameters 4602 * 4603 * Mesh setup parameters. These are used to start/join a mesh and cannot be 4604 * changed while the mesh is active. 4605 * 4606 * @__NL80211_MESH_SETUP_INVALID: Internal use 4607 * 4608 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a 4609 * vendor specific path selection algorithm or disable it to use the 4610 * default HWMP. 4611 * 4612 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a 4613 * vendor specific path metric or disable it to use the default Airtime 4614 * metric. 4615 * 4616 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a 4617 * robust security network ie, or a vendor specific information element 4618 * that vendors will use to identify the path selection methods and 4619 * metrics in use. 4620 * 4621 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication 4622 * daemon will be authenticating mesh candidates. 4623 * 4624 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication 4625 * daemon will be securing peer link frames. AMPE is a secured version of 4626 * Mesh Peering Management (MPM) and is implemented with the assistance of 4627 * a userspace daemon. When this flag is set, the kernel will send peer 4628 * management frames to a userspace daemon that will implement AMPE 4629 * functionality (security capabilities selection, key confirmation, and 4630 * key management). When the flag is unset (default), the kernel can 4631 * autonomously complete (unsecured) mesh peering without the need of a 4632 * userspace daemon. 4633 * 4634 * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a 4635 * vendor specific synchronization method or disable it to use the default 4636 * neighbor offset synchronization 4637 * 4638 * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will 4639 * implement an MPM which handles peer allocation and state. 4640 * 4641 * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication 4642 * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). 4643 * Default is no authentication method required. 4644 * 4645 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number 4646 * 4647 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use 4648 */ 4649 enum nl80211_mesh_setup_params { 4650 __NL80211_MESH_SETUP_INVALID, 4651 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, 4652 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, 4653 NL80211_MESH_SETUP_IE, 4654 NL80211_MESH_SETUP_USERSPACE_AUTH, 4655 NL80211_MESH_SETUP_USERSPACE_AMPE, 4656 NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, 4657 NL80211_MESH_SETUP_USERSPACE_MPM, 4658 NL80211_MESH_SETUP_AUTH_PROTOCOL, 4659 4660 /* keep last */ 4661 __NL80211_MESH_SETUP_ATTR_AFTER_LAST, 4662 NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 4663 }; 4664 4665 /** 4666 * enum nl80211_txq_attr - TX queue parameter attributes 4667 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved 4668 * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) 4669 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning 4670 * disabled 4671 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form 4672 * 2^n-1 in the range 1..32767] 4673 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form 4674 * 2^n-1 in the range 1..32767] 4675 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] 4676 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 4677 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number 4678 */ 4679 enum nl80211_txq_attr { 4680 __NL80211_TXQ_ATTR_INVALID, 4681 NL80211_TXQ_ATTR_AC, 4682 NL80211_TXQ_ATTR_TXOP, 4683 NL80211_TXQ_ATTR_CWMIN, 4684 NL80211_TXQ_ATTR_CWMAX, 4685 NL80211_TXQ_ATTR_AIFS, 4686 4687 /* keep last */ 4688 __NL80211_TXQ_ATTR_AFTER_LAST, 4689 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 4690 }; 4691 4692 enum nl80211_ac { 4693 NL80211_AC_VO, 4694 NL80211_AC_VI, 4695 NL80211_AC_BE, 4696 NL80211_AC_BK, 4697 NL80211_NUM_ACS 4698 }; 4699 4700 /* backward compat */ 4701 #define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC 4702 #define NL80211_TXQ_Q_VO NL80211_AC_VO 4703 #define NL80211_TXQ_Q_VI NL80211_AC_VI 4704 #define NL80211_TXQ_Q_BE NL80211_AC_BE 4705 #define NL80211_TXQ_Q_BK NL80211_AC_BK 4706 4707 /** 4708 * enum nl80211_channel_type - channel type 4709 * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel 4710 * @NL80211_CHAN_HT20: 20 MHz HT channel 4711 * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel 4712 * below the control channel 4713 * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel 4714 * above the control channel 4715 */ 4716 enum nl80211_channel_type { 4717 NL80211_CHAN_NO_HT, 4718 NL80211_CHAN_HT20, 4719 NL80211_CHAN_HT40MINUS, 4720 NL80211_CHAN_HT40PLUS 4721 }; 4722 4723 /** 4724 * enum nl80211_key_mode - Key mode 4725 * 4726 * @NL80211_KEY_RX_TX: (Default) 4727 * Key can be used for Rx and Tx immediately 4728 * 4729 * The following modes can only be selected for unicast keys and when the 4730 * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: 4731 * 4732 * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: 4733 * Unicast key can only be used for Rx, Tx not allowed, yet 4734 * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: 4735 * The unicast key identified by idx and mac is cleared for Tx and becomes 4736 * the preferred Tx key for the station. 4737 */ 4738 enum nl80211_key_mode { 4739 NL80211_KEY_RX_TX, 4740 NL80211_KEY_NO_TX, 4741 NL80211_KEY_SET_TX 4742 }; 4743 4744 /** 4745 * enum nl80211_chan_width - channel width definitions 4746 * 4747 * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH 4748 * attribute. 4749 * 4750 * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel 4751 * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel 4752 * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4753 * attribute must be provided as well 4754 * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4755 * attribute must be provided as well 4756 * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4757 * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well 4758 * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4759 * attribute must be provided as well 4760 * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel 4761 * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel 4762 * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel 4763 * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel 4764 * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel 4765 * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel 4766 * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel 4767 * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4768 * attribute must be provided as well 4769 */ 4770 enum nl80211_chan_width { 4771 NL80211_CHAN_WIDTH_20_NOHT, 4772 NL80211_CHAN_WIDTH_20, 4773 NL80211_CHAN_WIDTH_40, 4774 NL80211_CHAN_WIDTH_80, 4775 NL80211_CHAN_WIDTH_80P80, 4776 NL80211_CHAN_WIDTH_160, 4777 NL80211_CHAN_WIDTH_5, 4778 NL80211_CHAN_WIDTH_10, 4779 NL80211_CHAN_WIDTH_1, 4780 NL80211_CHAN_WIDTH_2, 4781 NL80211_CHAN_WIDTH_4, 4782 NL80211_CHAN_WIDTH_8, 4783 NL80211_CHAN_WIDTH_16, 4784 NL80211_CHAN_WIDTH_320, 4785 }; 4786 4787 /** 4788 * enum nl80211_bss_scan_width - control channel width for a BSS 4789 * 4790 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. 4791 * 4792 * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible 4793 * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide 4794 * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide 4795 * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide 4796 * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide 4797 */ 4798 enum nl80211_bss_scan_width { 4799 NL80211_BSS_CHAN_WIDTH_20, 4800 NL80211_BSS_CHAN_WIDTH_10, 4801 NL80211_BSS_CHAN_WIDTH_5, 4802 NL80211_BSS_CHAN_WIDTH_1, 4803 NL80211_BSS_CHAN_WIDTH_2, 4804 }; 4805 4806 /** 4807 * enum nl80211_bss - netlink attributes for a BSS 4808 * 4809 * @__NL80211_BSS_INVALID: invalid 4810 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) 4811 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) 4812 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) 4813 * (if @NL80211_BSS_PRESP_DATA is present then this is known to be 4814 * from a probe response, otherwise it may be from the same beacon 4815 * that the NL80211_BSS_BEACON_TSF will be from) 4816 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) 4817 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) 4818 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the 4819 * raw information elements from the probe response/beacon (bin); 4820 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is 4821 * different then the IEs here are from a Probe Response frame; otherwise 4822 * they are from a Beacon frame. 4823 * However, if the driver does not indicate the source of the IEs, these 4824 * IEs may be from either frame subtype. 4825 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the 4826 * data here is known to be from a probe response, without any heuristics. 4827 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon 4828 * in mBm (100 * dBm) (s32) 4829 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon 4830 * in unspecified units, scaled to 0..100 (u8) 4831 * @NL80211_BSS_STATUS: status, if this BSS is "used" 4832 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms 4833 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information 4834 * elements from a Beacon frame (bin); not present if no Beacon frame has 4835 * yet been received 4836 * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel 4837 * (u32, enum nl80211_bss_scan_width) 4838 * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) 4839 * (not present if no beacon frame has been received yet) 4840 * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and 4841 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) 4842 * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry 4843 * was last updated by a received frame. The value is expected to be 4844 * accurate to about 10ms. (u64, nanoseconds) 4845 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment 4846 * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first 4847 * octet of the timestamp field of the last beacon/probe received for 4848 * this BSS. The time is the TSF of the BSS specified by 4849 * @NL80211_BSS_PARENT_BSSID. (u64). 4850 * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF 4851 * is set. 4852 * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. 4853 * Contains a nested array of signal strength attributes (u8, dBm), 4854 * using the nesting index as the antenna number. 4855 * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz 4856 * @__NL80211_BSS_AFTER_LAST: internal 4857 * @NL80211_BSS_MAX: highest BSS attribute 4858 */ 4859 enum nl80211_bss { 4860 __NL80211_BSS_INVALID, 4861 NL80211_BSS_BSSID, 4862 NL80211_BSS_FREQUENCY, 4863 NL80211_BSS_TSF, 4864 NL80211_BSS_BEACON_INTERVAL, 4865 NL80211_BSS_CAPABILITY, 4866 NL80211_BSS_INFORMATION_ELEMENTS, 4867 NL80211_BSS_SIGNAL_MBM, 4868 NL80211_BSS_SIGNAL_UNSPEC, 4869 NL80211_BSS_STATUS, 4870 NL80211_BSS_SEEN_MS_AGO, 4871 NL80211_BSS_BEACON_IES, 4872 NL80211_BSS_CHAN_WIDTH, 4873 NL80211_BSS_BEACON_TSF, 4874 NL80211_BSS_PRESP_DATA, 4875 NL80211_BSS_LAST_SEEN_BOOTTIME, 4876 NL80211_BSS_PAD, 4877 NL80211_BSS_PARENT_TSF, 4878 NL80211_BSS_PARENT_BSSID, 4879 NL80211_BSS_CHAIN_SIGNAL, 4880 NL80211_BSS_FREQUENCY_OFFSET, 4881 4882 /* keep last */ 4883 __NL80211_BSS_AFTER_LAST, 4884 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 4885 }; 4886 4887 /** 4888 * enum nl80211_bss_status - BSS "status" 4889 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. 4890 * Note that this is no longer used since cfg80211 no longer 4891 * keeps track of whether or not authentication was done with 4892 * a given BSS. 4893 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. 4894 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. 4895 * 4896 * The BSS status is a BSS attribute in scan dumps, which 4897 * indicates the status the interface has wrt. this BSS. 4898 */ 4899 enum nl80211_bss_status { 4900 NL80211_BSS_STATUS_AUTHENTICATED, 4901 NL80211_BSS_STATUS_ASSOCIATED, 4902 NL80211_BSS_STATUS_IBSS_JOINED, 4903 }; 4904 4905 /** 4906 * enum nl80211_auth_type - AuthenticationType 4907 * 4908 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication 4909 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) 4910 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) 4911 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) 4912 * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals 4913 * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key 4914 * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS 4915 * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key 4916 * @__NL80211_AUTHTYPE_NUM: internal 4917 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm 4918 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by 4919 * trying multiple times); this is invalid in netlink -- leave out 4920 * the attribute for this on CONNECT commands. 4921 */ 4922 enum nl80211_auth_type { 4923 NL80211_AUTHTYPE_OPEN_SYSTEM, 4924 NL80211_AUTHTYPE_SHARED_KEY, 4925 NL80211_AUTHTYPE_FT, 4926 NL80211_AUTHTYPE_NETWORK_EAP, 4927 NL80211_AUTHTYPE_SAE, 4928 NL80211_AUTHTYPE_FILS_SK, 4929 NL80211_AUTHTYPE_FILS_SK_PFS, 4930 NL80211_AUTHTYPE_FILS_PK, 4931 4932 /* keep last */ 4933 __NL80211_AUTHTYPE_NUM, 4934 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, 4935 NL80211_AUTHTYPE_AUTOMATIC 4936 }; 4937 4938 /** 4939 * enum nl80211_key_type - Key Type 4940 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key 4941 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key 4942 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) 4943 * @NUM_NL80211_KEYTYPES: number of defined key types 4944 */ 4945 enum nl80211_key_type { 4946 NL80211_KEYTYPE_GROUP, 4947 NL80211_KEYTYPE_PAIRWISE, 4948 NL80211_KEYTYPE_PEERKEY, 4949 4950 NUM_NL80211_KEYTYPES 4951 }; 4952 4953 /** 4954 * enum nl80211_mfp - Management frame protection state 4955 * @NL80211_MFP_NO: Management frame protection not used 4956 * @NL80211_MFP_REQUIRED: Management frame protection required 4957 * @NL80211_MFP_OPTIONAL: Management frame protection is optional 4958 */ 4959 enum nl80211_mfp { 4960 NL80211_MFP_NO, 4961 NL80211_MFP_REQUIRED, 4962 NL80211_MFP_OPTIONAL, 4963 }; 4964 4965 enum nl80211_wpa_versions { 4966 NL80211_WPA_VERSION_1 = 1 << 0, 4967 NL80211_WPA_VERSION_2 = 1 << 1, 4968 NL80211_WPA_VERSION_3 = 1 << 2, 4969 }; 4970 4971 /** 4972 * enum nl80211_key_default_types - key default types 4973 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid 4974 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default 4975 * unicast key 4976 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default 4977 * multicast key 4978 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types 4979 */ 4980 enum nl80211_key_default_types { 4981 __NL80211_KEY_DEFAULT_TYPE_INVALID, 4982 NL80211_KEY_DEFAULT_TYPE_UNICAST, 4983 NL80211_KEY_DEFAULT_TYPE_MULTICAST, 4984 4985 NUM_NL80211_KEY_DEFAULT_TYPES 4986 }; 4987 4988 /** 4989 * enum nl80211_key_attributes - key attributes 4990 * @__NL80211_KEY_INVALID: invalid 4991 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of 4992 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 4993 * keys 4994 * @NL80211_KEY_IDX: key ID (u8, 0-3) 4995 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 4996 * section 7.3.2.25.1, e.g. 0x000FAC04) 4997 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 4998 * CCMP keys, each six bytes in little endian 4999 * @NL80211_KEY_DEFAULT: flag indicating default key 5000 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key 5001 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not 5002 * specified the default depends on whether a MAC address was 5003 * given with the command using the key or not (u32) 5004 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags 5005 * attributes, specifying what a key should be set as default as. 5006 * See &enum nl80211_key_default_types. 5007 * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. 5008 * Defaults to @NL80211_KEY_RX_TX. 5009 * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key 5010 * 5011 * @__NL80211_KEY_AFTER_LAST: internal 5012 * @NL80211_KEY_MAX: highest key attribute 5013 */ 5014 enum nl80211_key_attributes { 5015 __NL80211_KEY_INVALID, 5016 NL80211_KEY_DATA, 5017 NL80211_KEY_IDX, 5018 NL80211_KEY_CIPHER, 5019 NL80211_KEY_SEQ, 5020 NL80211_KEY_DEFAULT, 5021 NL80211_KEY_DEFAULT_MGMT, 5022 NL80211_KEY_TYPE, 5023 NL80211_KEY_DEFAULT_TYPES, 5024 NL80211_KEY_MODE, 5025 NL80211_KEY_DEFAULT_BEACON, 5026 5027 /* keep last */ 5028 __NL80211_KEY_AFTER_LAST, 5029 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 5030 }; 5031 5032 /** 5033 * enum nl80211_tx_rate_attributes - TX rate set attributes 5034 * @__NL80211_TXRATE_INVALID: invalid 5035 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection 5036 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with 5037 * 1 = 500 kbps) but without the IE length restriction (at most 5038 * %NL80211_MAX_SUPP_RATES in a single array). 5039 * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection 5040 * in an array of MCS numbers. 5041 * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, 5042 * see &struct nl80211_txrate_vht 5043 * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi 5044 * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, 5045 * see &struct nl80211_txrate_he 5046 * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. 5047 * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. 5048 * @__NL80211_TXRATE_AFTER_LAST: internal 5049 * @NL80211_TXRATE_MAX: highest TX rate attribute 5050 */ 5051 enum nl80211_tx_rate_attributes { 5052 __NL80211_TXRATE_INVALID, 5053 NL80211_TXRATE_LEGACY, 5054 NL80211_TXRATE_HT, 5055 NL80211_TXRATE_VHT, 5056 NL80211_TXRATE_GI, 5057 NL80211_TXRATE_HE, 5058 NL80211_TXRATE_HE_GI, 5059 NL80211_TXRATE_HE_LTF, 5060 5061 /* keep last */ 5062 __NL80211_TXRATE_AFTER_LAST, 5063 NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 5064 }; 5065 5066 #define NL80211_TXRATE_MCS NL80211_TXRATE_HT 5067 #define NL80211_VHT_NSS_MAX 8 5068 5069 /** 5070 * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap 5071 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 5072 */ 5073 struct nl80211_txrate_vht { 5074 __u16 mcs[NL80211_VHT_NSS_MAX]; 5075 }; 5076 5077 #define NL80211_HE_NSS_MAX 8 5078 /** 5079 * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap 5080 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 5081 */ 5082 struct nl80211_txrate_he { 5083 __u16 mcs[NL80211_HE_NSS_MAX]; 5084 }; 5085 5086 enum nl80211_txrate_gi { 5087 NL80211_TXRATE_DEFAULT_GI, 5088 NL80211_TXRATE_FORCE_SGI, 5089 NL80211_TXRATE_FORCE_LGI, 5090 }; 5091 5092 /** 5093 * enum nl80211_band - Frequency band 5094 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band 5095 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) 5096 * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) 5097 * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) 5098 * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs 5099 * @NL80211_BAND_LC: light communication band (placeholder) 5100 * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace 5101 * since newer kernel versions may support more bands 5102 */ 5103 enum nl80211_band { 5104 NL80211_BAND_2GHZ, 5105 NL80211_BAND_5GHZ, 5106 NL80211_BAND_60GHZ, 5107 NL80211_BAND_6GHZ, 5108 NL80211_BAND_S1GHZ, 5109 NL80211_BAND_LC, 5110 5111 NUM_NL80211_BANDS, 5112 }; 5113 5114 /** 5115 * enum nl80211_ps_state - powersave state 5116 * @NL80211_PS_DISABLED: powersave is disabled 5117 * @NL80211_PS_ENABLED: powersave is enabled 5118 */ 5119 enum nl80211_ps_state { 5120 NL80211_PS_DISABLED, 5121 NL80211_PS_ENABLED, 5122 }; 5123 5124 /** 5125 * enum nl80211_attr_cqm - connection quality monitor attributes 5126 * @__NL80211_ATTR_CQM_INVALID: invalid 5127 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies 5128 * the threshold for the RSSI level at which an event will be sent. Zero 5129 * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is 5130 * set, multiple values can be supplied as a low-to-high sorted array of 5131 * threshold values in dBm. Events will be sent when the RSSI value 5132 * crosses any of the thresholds. 5133 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies 5134 * the minimum amount the RSSI level must change after an event before a 5135 * new event may be issued (to reduce effects of RSSI oscillation). 5136 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event 5137 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many 5138 * consecutive packets were not acknowledged by the peer 5139 * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures 5140 * during the given %NL80211_ATTR_CQM_TXE_INTVL before an 5141 * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and 5142 * %NL80211_ATTR_CQM_TXE_PKTS is generated. 5143 * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given 5144 * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is 5145 * checked. 5146 * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic 5147 * interval in which %NL80211_ATTR_CQM_TXE_PKTS and 5148 * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an 5149 * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. 5150 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon 5151 * loss event 5152 * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the 5153 * RSSI threshold event. 5154 * @__NL80211_ATTR_CQM_AFTER_LAST: internal 5155 * @NL80211_ATTR_CQM_MAX: highest key attribute 5156 */ 5157 enum nl80211_attr_cqm { 5158 __NL80211_ATTR_CQM_INVALID, 5159 NL80211_ATTR_CQM_RSSI_THOLD, 5160 NL80211_ATTR_CQM_RSSI_HYST, 5161 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, 5162 NL80211_ATTR_CQM_PKT_LOSS_EVENT, 5163 NL80211_ATTR_CQM_TXE_RATE, 5164 NL80211_ATTR_CQM_TXE_PKTS, 5165 NL80211_ATTR_CQM_TXE_INTVL, 5166 NL80211_ATTR_CQM_BEACON_LOSS_EVENT, 5167 NL80211_ATTR_CQM_RSSI_LEVEL, 5168 5169 /* keep last */ 5170 __NL80211_ATTR_CQM_AFTER_LAST, 5171 NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 5172 }; 5173 5174 /** 5175 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event 5176 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the 5177 * configured threshold 5178 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the 5179 * configured threshold 5180 * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) 5181 */ 5182 enum nl80211_cqm_rssi_threshold_event { 5183 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 5184 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 5185 NL80211_CQM_RSSI_BEACON_LOSS_EVENT, 5186 }; 5187 5188 5189 /** 5190 * enum nl80211_tx_power_setting - TX power adjustment 5191 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power 5192 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter 5193 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter 5194 */ 5195 enum nl80211_tx_power_setting { 5196 NL80211_TX_POWER_AUTOMATIC, 5197 NL80211_TX_POWER_LIMITED, 5198 NL80211_TX_POWER_FIXED, 5199 }; 5200 5201 /** 5202 * enum nl80211_tid_config - TID config state 5203 * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID 5204 * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID 5205 */ 5206 enum nl80211_tid_config { 5207 NL80211_TID_CONFIG_ENABLE, 5208 NL80211_TID_CONFIG_DISABLE, 5209 }; 5210 5211 /* enum nl80211_tx_rate_setting - TX rate configuration type 5212 * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate 5213 * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter 5214 * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter 5215 */ 5216 enum nl80211_tx_rate_setting { 5217 NL80211_TX_RATE_AUTOMATIC, 5218 NL80211_TX_RATE_LIMITED, 5219 NL80211_TX_RATE_FIXED, 5220 }; 5221 5222 /* enum nl80211_tid_config_attr - TID specific configuration. 5223 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values 5224 * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported 5225 * for per-vif configuration; doesn't list the ones that are generic 5226 * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). 5227 * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but 5228 * per peer instead. 5229 * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates 5230 * that the new configuration overrides all previous peer 5231 * configurations, otherwise previous peer specific configurations 5232 * should be left untouched. 5233 * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) 5234 * Its type is u16. 5235 * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. 5236 * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. 5237 * Its type is u8. 5238 * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame 5239 * transmission, user-space sets this configuration in 5240 * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and 5241 * the max value is advertised by the driver in this attribute on 5242 * output in wiphy capabilities. 5243 * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame 5244 * transmission, user-space sets this configuration in 5245 * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and 5246 * the max value is advertised by the driver in this attribute on 5247 * output in wiphy capabilities. 5248 * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation 5249 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. 5250 * Its type is u8, using the values from &nl80211_tid_config. 5251 * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs 5252 * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using 5253 * the values from &nl80211_tid_config. 5254 * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation 5255 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. 5256 * Its type is u8, using the values from &nl80211_tid_config. 5257 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful 5258 * to notfiy the driver that what type of txrate should be used 5259 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using 5260 * the values form &nl80211_tx_rate_setting. 5261 * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied 5262 * with the parameters passed through %NL80211_ATTR_TX_RATES. 5263 * configuration is applied to the data frame for the tid to that connected 5264 * station. 5265 */ 5266 enum nl80211_tid_config_attr { 5267 __NL80211_TID_CONFIG_ATTR_INVALID, 5268 NL80211_TID_CONFIG_ATTR_PAD, 5269 NL80211_TID_CONFIG_ATTR_VIF_SUPP, 5270 NL80211_TID_CONFIG_ATTR_PEER_SUPP, 5271 NL80211_TID_CONFIG_ATTR_OVERRIDE, 5272 NL80211_TID_CONFIG_ATTR_TIDS, 5273 NL80211_TID_CONFIG_ATTR_NOACK, 5274 NL80211_TID_CONFIG_ATTR_RETRY_SHORT, 5275 NL80211_TID_CONFIG_ATTR_RETRY_LONG, 5276 NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, 5277 NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, 5278 NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, 5279 NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, 5280 NL80211_TID_CONFIG_ATTR_TX_RATE, 5281 5282 /* keep last */ 5283 __NL80211_TID_CONFIG_ATTR_AFTER_LAST, 5284 NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 5285 }; 5286 5287 /** 5288 * enum nl80211_packet_pattern_attr - packet pattern attribute 5289 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute 5290 * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has 5291 * a zero bit are ignored 5292 * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have 5293 * a bit for each byte in the pattern. The lowest-order bit corresponds 5294 * to the first byte of the pattern, but the bytes of the pattern are 5295 * in a little-endian-like format, i.e. the 9th byte of the pattern 5296 * corresponds to the lowest-order bit in the second byte of the mask. 5297 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where 5298 * xx indicates "don't care") would be represented by a pattern of 5299 * twelve zero bytes, and a mask of "0xed,0x01". 5300 * Note that the pattern matching is done as though frames were not 5301 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked 5302 * first (including SNAP header unpacking) and then matched. 5303 * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after 5304 * these fixed number of bytes of received packet 5305 * @NUM_NL80211_PKTPAT: number of attributes 5306 * @MAX_NL80211_PKTPAT: max attribute number 5307 */ 5308 enum nl80211_packet_pattern_attr { 5309 __NL80211_PKTPAT_INVALID, 5310 NL80211_PKTPAT_MASK, 5311 NL80211_PKTPAT_PATTERN, 5312 NL80211_PKTPAT_OFFSET, 5313 5314 NUM_NL80211_PKTPAT, 5315 MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, 5316 }; 5317 5318 /** 5319 * struct nl80211_pattern_support - packet pattern support information 5320 * @max_patterns: maximum number of patterns supported 5321 * @min_pattern_len: minimum length of each pattern 5322 * @max_pattern_len: maximum length of each pattern 5323 * @max_pkt_offset: maximum Rx packet offset 5324 * 5325 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when 5326 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in 5327 * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of 5328 * %NL80211_ATTR_COALESCE_RULE in the capability information given 5329 * by the kernel to userspace. 5330 */ 5331 struct nl80211_pattern_support { 5332 __u32 max_patterns; 5333 __u32 min_pattern_len; 5334 __u32 max_pattern_len; 5335 __u32 max_pkt_offset; 5336 } __attribute__((packed)); 5337 5338 /* only for backward compatibility */ 5339 #define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID 5340 #define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK 5341 #define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN 5342 #define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET 5343 #define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT 5344 #define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT 5345 #define nl80211_wowlan_pattern_support nl80211_pattern_support 5346 5347 /** 5348 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions 5349 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes 5350 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put 5351 * the chip into a special state -- works best with chips that have 5352 * support for low-power operation already (flag) 5353 * Note that this mode is incompatible with all of the others, if 5354 * any others are even supported by the device. 5355 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect 5356 * is detected is implementation-specific (flag) 5357 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed 5358 * by 16 repetitions of MAC addr, anywhere in payload) (flag) 5359 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns 5360 * which are passed in an array of nested attributes, each nested attribute 5361 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. 5362 * Each pattern defines a wakeup packet. Packet offset is associated with 5363 * each pattern which is used while matching the pattern. The matching is 5364 * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the 5365 * pattern matching is done after the packet is converted to the MSDU. 5366 * 5367 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute 5368 * carrying a &struct nl80211_pattern_support. 5369 * 5370 * When reporting wakeup. it is a u32 attribute containing the 0-based 5371 * index of the pattern that caused the wakeup, in the patterns passed 5372 * to the kernel when configuring. 5373 * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be 5374 * used when setting, used only to indicate that GTK rekeying is supported 5375 * by the device (flag) 5376 * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if 5377 * done by the device) (flag) 5378 * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request 5379 * packet (flag) 5380 * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) 5381 * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released 5382 * (on devices that have rfkill in the device) (flag) 5383 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains 5384 * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame 5385 * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN 5386 * attribute contains the original length. 5387 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 5388 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 5389 * attribute if the packet was truncated somewhere. 5390 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the 5391 * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may 5392 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute 5393 * contains the original length. 5394 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 5395 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 5396 * attribute if the packet was truncated somewhere. 5397 * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section 5398 * "TCP connection wakeup" for more details. This is a nested attribute 5399 * containing the exact information for establishing and keeping alive 5400 * the TCP connection. 5401 * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the 5402 * wakeup packet was received on the TCP connection 5403 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the 5404 * TCP connection was lost or failed to be established 5405 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, 5406 * the TCP connection ran out of tokens to use for data to send to the 5407 * service 5408 * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network 5409 * is detected. This is a nested attribute that contains the 5410 * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It 5411 * specifies how the scan is performed (e.g. the interval, the 5412 * channels to scan and the initial delay) as well as the scan 5413 * results that will trigger a wake (i.e. the matchsets). This 5414 * attribute is also sent in a response to 5415 * @NL80211_CMD_GET_WIPHY, indicating the number of match sets 5416 * supported by the driver (u32). 5417 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute 5418 * containing an array with information about what triggered the 5419 * wake up. If no elements are present in the array, it means 5420 * that the information is not available. If more than one 5421 * element is present, it means that more than one match 5422 * occurred. 5423 * Each element in the array is a nested attribute that contains 5424 * one optional %NL80211_ATTR_SSID attribute and one optional 5425 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of 5426 * these attributes must be present. If 5427 * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one 5428 * frequency, it means that the match occurred in more than one 5429 * channel. 5430 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers 5431 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number 5432 * 5433 * These nested attributes are used to configure the wakeup triggers and 5434 * to report the wakeup reason(s). 5435 */ 5436 enum nl80211_wowlan_triggers { 5437 __NL80211_WOWLAN_TRIG_INVALID, 5438 NL80211_WOWLAN_TRIG_ANY, 5439 NL80211_WOWLAN_TRIG_DISCONNECT, 5440 NL80211_WOWLAN_TRIG_MAGIC_PKT, 5441 NL80211_WOWLAN_TRIG_PKT_PATTERN, 5442 NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, 5443 NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, 5444 NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, 5445 NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, 5446 NL80211_WOWLAN_TRIG_RFKILL_RELEASE, 5447 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, 5448 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, 5449 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, 5450 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, 5451 NL80211_WOWLAN_TRIG_TCP_CONNECTION, 5452 NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, 5453 NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, 5454 NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, 5455 NL80211_WOWLAN_TRIG_NET_DETECT, 5456 NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, 5457 5458 /* keep last */ 5459 NUM_NL80211_WOWLAN_TRIG, 5460 MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 5461 }; 5462 5463 /** 5464 * DOC: TCP connection wakeup 5465 * 5466 * Some devices can establish a TCP connection in order to be woken up by a 5467 * packet coming in from outside their network segment, or behind NAT. If 5468 * configured, the device will establish a TCP connection to the given 5469 * service, and periodically send data to that service. The first data 5470 * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. 5471 * The data packets can optionally include a (little endian) sequence 5472 * number (in the TCP payload!) that is generated by the device, and, also 5473 * optionally, a token from a list of tokens. This serves as a keep-alive 5474 * with the service, and for NATed connections, etc. 5475 * 5476 * During this keep-alive period, the server doesn't send any data to the 5477 * client. When receiving data, it is compared against the wakeup pattern 5478 * (and mask) and if it matches, the host is woken up. Similarly, if the 5479 * connection breaks or cannot be established to start with, the host is 5480 * also woken up. 5481 * 5482 * Developer's note: ARP offload is required for this, otherwise TCP 5483 * response packets might not go through correctly. 5484 */ 5485 5486 /** 5487 * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence 5488 * @start: starting value 5489 * @offset: offset of sequence number in packet 5490 * @len: length of the sequence value to write, 1 through 4 5491 * 5492 * Note: don't confuse with the TCP sequence number(s), this is for the 5493 * keepalive packet payload. The actual value is written into the packet 5494 * in little endian. 5495 */ 5496 struct nl80211_wowlan_tcp_data_seq { 5497 __u32 start, offset, len; 5498 }; 5499 5500 /** 5501 * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config 5502 * @offset: offset of token in packet 5503 * @len: length of each token 5504 * @token_stream: stream of data to be used for the tokens, the length must 5505 * be a multiple of @len for this to make sense 5506 */ 5507 struct nl80211_wowlan_tcp_data_token { 5508 __u32 offset, len; 5509 __u8 token_stream[]; 5510 }; 5511 5512 /** 5513 * struct nl80211_wowlan_tcp_data_token_feature - data token features 5514 * @min_len: minimum token length 5515 * @max_len: maximum token length 5516 * @bufsize: total available token buffer size (max size of @token_stream) 5517 */ 5518 struct nl80211_wowlan_tcp_data_token_feature { 5519 __u32 min_len, max_len, bufsize; 5520 }; 5521 5522 /** 5523 * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters 5524 * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes 5525 * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) 5526 * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address 5527 * (in network byte order) 5528 * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because 5529 * route lookup when configured might be invalid by the time we suspend, 5530 * and doing a route lookup when suspending is no longer possible as it 5531 * might require ARP querying. 5532 * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a 5533 * socket and port will be allocated 5534 * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) 5535 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. 5536 * For feature advertising, a u32 attribute holding the maximum length 5537 * of the data payload. 5538 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration 5539 * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature 5540 * advertising it is just a flag 5541 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, 5542 * see &struct nl80211_wowlan_tcp_data_token and for advertising see 5543 * &struct nl80211_wowlan_tcp_data_token_feature. 5544 * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum 5545 * interval in feature advertising (u32) 5546 * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a 5547 * u32 attribute holding the maximum length 5548 * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for 5549 * feature advertising. The mask works like @NL80211_PKTPAT_MASK 5550 * but on the TCP payload only. 5551 * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes 5552 * @MAX_NL80211_WOWLAN_TCP: highest attribute number 5553 */ 5554 enum nl80211_wowlan_tcp_attrs { 5555 __NL80211_WOWLAN_TCP_INVALID, 5556 NL80211_WOWLAN_TCP_SRC_IPV4, 5557 NL80211_WOWLAN_TCP_DST_IPV4, 5558 NL80211_WOWLAN_TCP_DST_MAC, 5559 NL80211_WOWLAN_TCP_SRC_PORT, 5560 NL80211_WOWLAN_TCP_DST_PORT, 5561 NL80211_WOWLAN_TCP_DATA_PAYLOAD, 5562 NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, 5563 NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, 5564 NL80211_WOWLAN_TCP_DATA_INTERVAL, 5565 NL80211_WOWLAN_TCP_WAKE_PAYLOAD, 5566 NL80211_WOWLAN_TCP_WAKE_MASK, 5567 5568 /* keep last */ 5569 NUM_NL80211_WOWLAN_TCP, 5570 MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 5571 }; 5572 5573 /** 5574 * struct nl80211_coalesce_rule_support - coalesce rule support information 5575 * @max_rules: maximum number of rules supported 5576 * @pat: packet pattern support information 5577 * @max_delay: maximum supported coalescing delay in msecs 5578 * 5579 * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the 5580 * capability information given by the kernel to userspace. 5581 */ 5582 struct nl80211_coalesce_rule_support { 5583 __u32 max_rules; 5584 struct nl80211_pattern_support pat; 5585 __u32 max_delay; 5586 } __attribute__((packed)); 5587 5588 /** 5589 * enum nl80211_attr_coalesce_rule - coalesce rule attribute 5590 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute 5591 * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing 5592 * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, 5593 * see &enum nl80211_coalesce_condition. 5594 * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched 5595 * after these fixed number of bytes of received packet 5596 * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes 5597 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number 5598 */ 5599 enum nl80211_attr_coalesce_rule { 5600 __NL80211_COALESCE_RULE_INVALID, 5601 NL80211_ATTR_COALESCE_RULE_DELAY, 5602 NL80211_ATTR_COALESCE_RULE_CONDITION, 5603 NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, 5604 5605 /* keep last */ 5606 NUM_NL80211_ATTR_COALESCE_RULE, 5607 NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 5608 }; 5609 5610 /** 5611 * enum nl80211_coalesce_condition - coalesce rule conditions 5612 * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns 5613 * in a rule are matched. 5614 * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns 5615 * in a rule are not matched. 5616 */ 5617 enum nl80211_coalesce_condition { 5618 NL80211_COALESCE_CONDITION_MATCH, 5619 NL80211_COALESCE_CONDITION_NO_MATCH 5620 }; 5621 5622 /** 5623 * enum nl80211_iface_limit_attrs - limit attributes 5624 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) 5625 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that 5626 * can be chosen from this set of interface types (u32) 5627 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a 5628 * flag attribute for each interface type in this set 5629 * @NUM_NL80211_IFACE_LIMIT: number of attributes 5630 * @MAX_NL80211_IFACE_LIMIT: highest attribute number 5631 */ 5632 enum nl80211_iface_limit_attrs { 5633 NL80211_IFACE_LIMIT_UNSPEC, 5634 NL80211_IFACE_LIMIT_MAX, 5635 NL80211_IFACE_LIMIT_TYPES, 5636 5637 /* keep last */ 5638 NUM_NL80211_IFACE_LIMIT, 5639 MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 5640 }; 5641 5642 /** 5643 * enum nl80211_if_combination_attrs -- interface combination attributes 5644 * 5645 * @NL80211_IFACE_COMB_UNSPEC: (reserved) 5646 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits 5647 * for given interface types, see &enum nl80211_iface_limit_attrs. 5648 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of 5649 * interfaces that can be created in this group. This number doesn't 5650 * apply to interfaces purely managed in software, which are listed 5651 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. 5652 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that 5653 * beacon intervals within this group must be all the same even for 5654 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt 5655 * the infrastructure network's beacon interval. 5656 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many 5657 * different channels may be used within this group. 5658 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap 5659 * of supported channel widths for radar detection. 5660 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap 5661 * of supported regulatory regions for radar detection. 5662 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of 5663 * different beacon intervals supported by all the interface combinations 5664 * in this group (if not present, all beacon intervals be identical). 5665 * @NUM_NL80211_IFACE_COMB: number of attributes 5666 * @MAX_NL80211_IFACE_COMB: highest attribute number 5667 * 5668 * Examples: 5669 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 5670 * => allows an AP and a STA that must match BIs 5671 * 5672 * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, 5673 * => allows 8 of AP/GO that can have BI gcd >= min gcd 5674 * 5675 * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 5676 * => allows two STAs on the same or on different channels 5677 * 5678 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 5679 * => allows a STA plus three P2P interfaces 5680 * 5681 * The list of these four possibilities could completely be contained 5682 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate 5683 * that any of these groups must match. 5684 * 5685 * "Combinations" of just a single interface will not be listed here, 5686 * a single interface of any valid interface type is assumed to always 5687 * be possible by itself. This means that implicitly, for each valid 5688 * interface type, the following group always exists: 5689 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 5690 */ 5691 enum nl80211_if_combination_attrs { 5692 NL80211_IFACE_COMB_UNSPEC, 5693 NL80211_IFACE_COMB_LIMITS, 5694 NL80211_IFACE_COMB_MAXNUM, 5695 NL80211_IFACE_COMB_STA_AP_BI_MATCH, 5696 NL80211_IFACE_COMB_NUM_CHANNELS, 5697 NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, 5698 NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, 5699 NL80211_IFACE_COMB_BI_MIN_GCD, 5700 5701 /* keep last */ 5702 NUM_NL80211_IFACE_COMB, 5703 MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 5704 }; 5705 5706 5707 /** 5708 * enum nl80211_plink_state - state of a mesh peer link finite state machine 5709 * 5710 * @NL80211_PLINK_LISTEN: initial state, considered the implicit 5711 * state of non existent mesh peer links 5712 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to 5713 * this mesh peer 5714 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received 5715 * from this mesh peer 5716 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been 5717 * received from this mesh peer 5718 * @NL80211_PLINK_ESTAB: mesh peer link is established 5719 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled 5720 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh 5721 * plink are discarded, except for authentication frames 5722 * @NUM_NL80211_PLINK_STATES: number of peer link states 5723 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states 5724 */ 5725 enum nl80211_plink_state { 5726 NL80211_PLINK_LISTEN, 5727 NL80211_PLINK_OPN_SNT, 5728 NL80211_PLINK_OPN_RCVD, 5729 NL80211_PLINK_CNF_RCVD, 5730 NL80211_PLINK_ESTAB, 5731 NL80211_PLINK_HOLDING, 5732 NL80211_PLINK_BLOCKED, 5733 5734 /* keep last */ 5735 NUM_NL80211_PLINK_STATES, 5736 MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 5737 }; 5738 5739 /** 5740 * enum nl80211_plink_action - actions to perform in mesh peers 5741 * 5742 * @NL80211_PLINK_ACTION_NO_ACTION: perform no action 5743 * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment 5744 * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer 5745 * @NUM_NL80211_PLINK_ACTIONS: number of possible actions 5746 */ 5747 enum plink_actions { 5748 NL80211_PLINK_ACTION_NO_ACTION, 5749 NL80211_PLINK_ACTION_OPEN, 5750 NL80211_PLINK_ACTION_BLOCK, 5751 5752 NUM_NL80211_PLINK_ACTIONS, 5753 }; 5754 5755 5756 #define NL80211_KCK_LEN 16 5757 #define NL80211_KEK_LEN 16 5758 #define NL80211_KCK_EXT_LEN 24 5759 #define NL80211_KEK_EXT_LEN 32 5760 #define NL80211_REPLAY_CTR_LEN 8 5761 5762 /** 5763 * enum nl80211_rekey_data - attributes for GTK rekey offload 5764 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes 5765 * @NL80211_REKEY_DATA_KEK: key encryption key (binary) 5766 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) 5767 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) 5768 * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) 5769 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) 5770 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) 5771 */ 5772 enum nl80211_rekey_data { 5773 __NL80211_REKEY_DATA_INVALID, 5774 NL80211_REKEY_DATA_KEK, 5775 NL80211_REKEY_DATA_KCK, 5776 NL80211_REKEY_DATA_REPLAY_CTR, 5777 NL80211_REKEY_DATA_AKM, 5778 5779 /* keep last */ 5780 NUM_NL80211_REKEY_DATA, 5781 MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 5782 }; 5783 5784 /** 5785 * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID 5786 * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in 5787 * Beacon frames) 5788 * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element 5789 * in Beacon frames 5790 * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID 5791 * element in Beacon frames but zero out each byte in the SSID 5792 */ 5793 enum nl80211_hidden_ssid { 5794 NL80211_HIDDEN_SSID_NOT_IN_USE, 5795 NL80211_HIDDEN_SSID_ZERO_LEN, 5796 NL80211_HIDDEN_SSID_ZERO_CONTENTS 5797 }; 5798 5799 /** 5800 * enum nl80211_sta_wme_attr - station WME attributes 5801 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute 5802 * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format 5803 * is the same as the AC bitmap in the QoS info field. 5804 * @NL80211_STA_WME_MAX_SP: max service period. the format is the same 5805 * as the MAX_SP field in the QoS info field (but already shifted down). 5806 * @__NL80211_STA_WME_AFTER_LAST: internal 5807 * @NL80211_STA_WME_MAX: highest station WME attribute 5808 */ 5809 enum nl80211_sta_wme_attr { 5810 __NL80211_STA_WME_INVALID, 5811 NL80211_STA_WME_UAPSD_QUEUES, 5812 NL80211_STA_WME_MAX_SP, 5813 5814 /* keep last */ 5815 __NL80211_STA_WME_AFTER_LAST, 5816 NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 5817 }; 5818 5819 /** 5820 * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates 5821 * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes 5822 * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher 5823 * priority) 5824 * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) 5825 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) 5826 * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes 5827 * (internal) 5828 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute 5829 * (internal) 5830 */ 5831 enum nl80211_pmksa_candidate_attr { 5832 __NL80211_PMKSA_CANDIDATE_INVALID, 5833 NL80211_PMKSA_CANDIDATE_INDEX, 5834 NL80211_PMKSA_CANDIDATE_BSSID, 5835 NL80211_PMKSA_CANDIDATE_PREAUTH, 5836 5837 /* keep last */ 5838 NUM_NL80211_PMKSA_CANDIDATE, 5839 MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 5840 }; 5841 5842 /** 5843 * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION 5844 * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request 5845 * @NL80211_TDLS_SETUP: Setup TDLS link 5846 * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established 5847 * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link 5848 * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link 5849 */ 5850 enum nl80211_tdls_operation { 5851 NL80211_TDLS_DISCOVERY_REQ, 5852 NL80211_TDLS_SETUP, 5853 NL80211_TDLS_TEARDOWN, 5854 NL80211_TDLS_ENABLE_LINK, 5855 NL80211_TDLS_DISABLE_LINK, 5856 }; 5857 5858 /** 5859 * enum nl80211_ap_sme_features - device-integrated AP features 5860 * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver 5861 * when user space indicates support for SA Query procedures offload during 5862 * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. 5863 */ 5864 enum nl80211_ap_sme_features { 5865 NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, 5866 }; 5867 5868 /** 5869 * enum nl80211_feature_flags - device/driver features 5870 * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back 5871 * TX status to the socket error queue when requested with the 5872 * socket option. 5873 * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. 5874 * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up 5875 * the connected inactive stations in AP mode. 5876 * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested 5877 * to work properly to suppport receiving regulatory hints from 5878 * cellular base stations. 5879 * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only 5880 * here to reserve the value for API/ABI compatibility) 5881 * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of 5882 * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station 5883 * mode 5884 * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan 5885 * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported 5886 * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif 5887 * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting 5888 * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform 5889 * OBSS scans and generate 20/40 BSS coex reports. This flag is used only 5890 * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. 5891 * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window 5892 * setting 5893 * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic 5894 * powersave 5895 * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state 5896 * transitions for AP clients. Without this flag (and if the driver 5897 * doesn't have the AP SME in the device) the driver supports adding 5898 * stations only when they're associated and adds them in associated 5899 * state (to later be transitioned into authorized), with this flag 5900 * they should be added before even sending the authentication reply 5901 * and then transitioned into authenticated, associated and authorized 5902 * states using station flags. 5903 * Note that even for drivers that support this, the default is to add 5904 * stations in authenticated/associated state, so to add unauthenticated 5905 * stations the authenticated/associated bits have to be set in the mask. 5906 * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits 5907 * (HT40, VHT 80/160 MHz) if this flag is set 5908 * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh 5909 * Peering Management entity which may be implemented by registering for 5910 * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is 5911 * still generated by the driver. 5912 * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor 5913 * interface. An active monitor interface behaves like a normal monitor 5914 * interface, but gets added to the driver. It ensures that incoming 5915 * unicast packets directed at the configured interface address get ACKed. 5916 * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic 5917 * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the 5918 * lifetime of a BSS. 5919 * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter 5920 * Set IE to probe requests. 5921 * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE 5922 * to probe requests. 5923 * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period 5924 * requests sent to it by an AP. 5925 * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the 5926 * current tx power value into the TPC Report IE in the spectrum 5927 * management TPC Report action frame, and in the Radio Measurement Link 5928 * Measurement Report action frame. 5929 * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout 5930 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used 5931 * to enable dynack. 5932 * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial 5933 * multiplexing powersave, ie. can turn off all but one chain 5934 * even on HT connections that should be using more chains. 5935 * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial 5936 * multiplexing powersave, ie. can turn off all but one chain 5937 * and then wake the rest up as required after, for example, 5938 * rts/cts handshake. 5939 * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM 5940 * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS 5941 * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it 5942 * needs to be able to handle Block-Ack agreements and other things. 5943 * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring 5944 * the vif's MAC address upon creation. 5945 * See 'macaddr' field in the vif_params (cfg80211.h). 5946 * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when 5947 * operating as a TDLS peer. 5948 * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a 5949 * random MAC address during scan (if the device is unassociated); the 5950 * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC 5951 * address mask/value will be used. 5952 * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports 5953 * using a random MAC address for every scan iteration during scheduled 5954 * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may 5955 * be set for scheduled scan and the MAC address mask/value will be used. 5956 * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a 5957 * random MAC address for every scan iteration during "net detect", i.e. 5958 * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may 5959 * be set for scheduled scan and the MAC address mask/value will be used. 5960 */ 5961 enum nl80211_feature_flags { 5962 NL80211_FEATURE_SK_TX_STATUS = 1 << 0, 5963 NL80211_FEATURE_HT_IBSS = 1 << 1, 5964 NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, 5965 NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, 5966 NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, 5967 NL80211_FEATURE_SAE = 1 << 5, 5968 NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, 5969 NL80211_FEATURE_SCAN_FLUSH = 1 << 7, 5970 NL80211_FEATURE_AP_SCAN = 1 << 8, 5971 NL80211_FEATURE_VIF_TXPOWER = 1 << 9, 5972 NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, 5973 NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, 5974 NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, 5975 /* bit 13 is reserved */ 5976 NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, 5977 NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, 5978 NL80211_FEATURE_USERSPACE_MPM = 1 << 16, 5979 NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, 5980 NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, 5981 NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, 5982 NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, 5983 NL80211_FEATURE_QUIET = 1 << 21, 5984 NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, 5985 NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, 5986 NL80211_FEATURE_STATIC_SMPS = 1 << 24, 5987 NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, 5988 NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, 5989 NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, 5990 NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, 5991 NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, 5992 NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, 5993 NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, 5994 }; 5995 5996 /** 5997 * enum nl80211_ext_feature_index - bit index of extended features. 5998 * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. 5999 * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can 6000 * request to use RRM (see %NL80211_ATTR_USE_RRM) with 6001 * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set 6002 * the ASSOC_REQ_USE_RRM flag in the association request even if 6003 * NL80211_FEATURE_QUIET is not advertized. 6004 * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air 6005 * sniffer which means that it can be configured to hear packets from 6006 * certain groups which can be configured by the 6007 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, 6008 * or can be configured to follow a station by configuring the 6009 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. 6010 * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual 6011 * time the scan started in scan results event. The time is the TSF of 6012 * the BSS that the interface that requested the scan is connected to 6013 * (if available). 6014 * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the 6015 * time the last beacon/probe was received. The time is the TSF of the 6016 * BSS that the interface that requested the scan is connected to 6017 * (if available). 6018 * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of 6019 * channel dwell time. 6020 * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate 6021 * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. 6022 * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate 6023 * configuration (AP/mesh) with HT rates. 6024 * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate 6025 * configuration (AP/mesh) with VHT rates. 6026 * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup 6027 * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. 6028 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA 6029 * in @NL80211_CMD_FRAME while not associated. 6030 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports 6031 * randomized TA in @NL80211_CMD_FRAME while associated. 6032 * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan 6033 * for reporting BSSs with better RSSI than the current connected BSS 6034 * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). 6035 * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the 6036 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more 6037 * RSSI threshold values to monitor rather than exactly one threshold. 6038 * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key 6039 * authentication with %NL80211_CMD_CONNECT. 6040 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way 6041 * handshake with PSK in station mode (PSK is passed as part of the connect 6042 * and associate commands), doing it in the host might not be supported. 6043 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way 6044 * handshake with 802.1X in station mode (will pass EAP frames to the host 6045 * and accept the set_pmk/del_pmk commands), doing it in the host might not 6046 * be supported. 6047 * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding 6048 * the max channel attribute in the FILS request params IE with the 6049 * actual dwell time. 6050 * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe 6051 * response 6052 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending 6053 * the first probe request in each channel at rate of at least 5.5Mbps. 6054 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports 6055 * probe request tx deferral and suppression 6056 * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL 6057 * value in %NL80211_ATTR_USE_MFP. 6058 * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. 6059 * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. 6060 * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. 6061 * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. 6062 * Device or driver will do all DFS-related actions by itself, 6063 * informing user-space about CAC progress, radar detection event, 6064 * channel change triggered by radar detection event. 6065 * No need to start CAC from user-space, no need to react to 6066 * "radar detected" event. 6067 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and 6068 * receiving control port frames over nl80211 instead of the netdevice. 6069 * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports 6070 * (average) ACK signal strength reporting. 6071 * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate 6072 * TXQs. 6073 * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the 6074 * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. 6075 * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data 6076 * except for supported rates from the probe request content if requested 6077 * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. 6078 * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine 6079 * timing measurement responder role. 6080 * 6081 * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are 6082 * able to rekey an in-use key correctly. Userspace must not rekey PTK keys 6083 * if this flag is not set. Ignoring this can leak clear text packets and/or 6084 * freeze the connection. 6085 * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for 6086 * Individually Addressed Frames" from IEEE802.11-2016. 6087 * 6088 * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime 6089 * fairness for transmitted packets and has enabled airtime fairness 6090 * scheduling. 6091 * 6092 * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching 6093 * (set/del PMKSA operations) in AP mode. 6094 * 6095 * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports 6096 * filtering of sched scan results using band specific RSSI thresholds. 6097 * 6098 * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power 6099 * to a station. 6100 * 6101 * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in 6102 * station mode (SAE password is passed as part of the connect command). 6103 * 6104 * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev 6105 * with VLAN tagged frames and separate VLAN-specific netdevs added using 6106 * vconfig similarly to the Ethernet case. 6107 * 6108 * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) 6109 * feature, which prevents bufferbloat by using the expected transmission 6110 * time to limit the amount of data buffered in the hardware. 6111 * 6112 * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection 6113 * and can receive key configuration for BIGTK using key indexes 6 and 7. 6114 * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon 6115 * protection as a client only and cannot transmit protected beacons. 6116 * 6117 * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the 6118 * forwarding of preauth frames over the control port. They are then 6119 * handled as ordinary data frames. 6120 * 6121 * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames 6122 * 6123 * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations 6124 * in IBSS mode, essentially by dropping their state. 6125 * 6126 * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations 6127 * are possible for multicast frames and those will be reported properly. 6128 * 6129 * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and 6130 * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to 6131 * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be 6132 * included in the scan request. 6133 * 6134 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver 6135 * can report tx status for control port over nl80211 tx operations. 6136 * 6137 * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating 6138 * Channel Validation (OCV) when using driver's SME for RSNA handshakes. 6139 * 6140 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way 6141 * handshake with PSK in AP mode (PSK is passed as part of the start AP 6142 * command). 6143 * 6144 * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication 6145 * in AP mode (SAE password is passed as part of the start AP command). 6146 * 6147 * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery 6148 * frames transmission 6149 * 6150 * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports 6151 * unsolicited broadcast probe response transmission 6152 * 6153 * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate 6154 * configuration (AP/mesh) with HE rates. 6155 * 6156 * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement 6157 * exchange protocol. 6158 * 6159 * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement 6160 * exchange protocol. 6161 * 6162 * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management 6163 * frame protection for all management frames exchanged during the 6164 * negotiation and range measurement procedure. 6165 * 6166 * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision 6167 * detection and change announcemnts. 6168 * 6169 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports 6170 * FILS encryption and decryption for (Re)Association Request and Response 6171 * frames. Userspace has to share FILS AAD details to the driver by using 6172 * @NL80211_CMD_SET_FILS_AAD. 6173 * 6174 * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC 6175 * detection. 6176 * 6177 * @NUM_NL80211_EXT_FEATURES: number of extended features. 6178 * @MAX_NL80211_EXT_FEATURES: highest extended feature index. 6179 */ 6180 enum nl80211_ext_feature_index { 6181 NL80211_EXT_FEATURE_VHT_IBSS, 6182 NL80211_EXT_FEATURE_RRM, 6183 NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, 6184 NL80211_EXT_FEATURE_SCAN_START_TIME, 6185 NL80211_EXT_FEATURE_BSS_PARENT_TSF, 6186 NL80211_EXT_FEATURE_SET_SCAN_DWELL, 6187 NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 6188 NL80211_EXT_FEATURE_BEACON_RATE_HT, 6189 NL80211_EXT_FEATURE_BEACON_RATE_VHT, 6190 NL80211_EXT_FEATURE_FILS_STA, 6191 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, 6192 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, 6193 NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, 6194 NL80211_EXT_FEATURE_CQM_RSSI_LIST, 6195 NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, 6196 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, 6197 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, 6198 NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, 6199 NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, 6200 NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, 6201 NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, 6202 NL80211_EXT_FEATURE_MFP_OPTIONAL, 6203 NL80211_EXT_FEATURE_LOW_SPAN_SCAN, 6204 NL80211_EXT_FEATURE_LOW_POWER_SCAN, 6205 NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, 6206 NL80211_EXT_FEATURE_DFS_OFFLOAD, 6207 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, 6208 NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 6209 /* we renamed this - stay compatible */ 6210 NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 6211 NL80211_EXT_FEATURE_TXQS, 6212 NL80211_EXT_FEATURE_SCAN_RANDOM_SN, 6213 NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, 6214 NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, 6215 NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, 6216 NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, 6217 NL80211_EXT_FEATURE_AP_PMKSA_CACHING, 6218 NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, 6219 NL80211_EXT_FEATURE_EXT_KEY_ID, 6220 NL80211_EXT_FEATURE_STA_TX_PWR, 6221 NL80211_EXT_FEATURE_SAE_OFFLOAD, 6222 NL80211_EXT_FEATURE_VLAN_OFFLOAD, 6223 NL80211_EXT_FEATURE_AQL, 6224 NL80211_EXT_FEATURE_BEACON_PROTECTION, 6225 NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, 6226 NL80211_EXT_FEATURE_PROTECTED_TWT, 6227 NL80211_EXT_FEATURE_DEL_IBSS_STA, 6228 NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, 6229 NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, 6230 NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, 6231 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, 6232 NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, 6233 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, 6234 NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, 6235 NL80211_EXT_FEATURE_FILS_DISCOVERY, 6236 NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, 6237 NL80211_EXT_FEATURE_BEACON_RATE_HE, 6238 NL80211_EXT_FEATURE_SECURE_LTF, 6239 NL80211_EXT_FEATURE_SECURE_RTT, 6240 NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, 6241 NL80211_EXT_FEATURE_BSS_COLOR, 6242 NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, 6243 NL80211_EXT_FEATURE_RADAR_BACKGROUND, 6244 6245 /* add new features before the definition below */ 6246 NUM_NL80211_EXT_FEATURES, 6247 MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 6248 }; 6249 6250 /** 6251 * enum nl80211_probe_resp_offload_support_attr - optional supported 6252 * protocols for probe-response offloading by the driver/FW. 6253 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. 6254 * Each enum value represents a bit in the bitmap of supported 6255 * protocols. Typically a subset of probe-requests belonging to a 6256 * supported protocol will be excluded from offload and uploaded 6257 * to the host. 6258 * 6259 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 6260 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 6261 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P 6262 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u 6263 */ 6264 enum nl80211_probe_resp_offload_support_attr { 6265 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, 6266 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, 6267 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, 6268 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, 6269 }; 6270 6271 /** 6272 * enum nl80211_connect_failed_reason - connection request failed reasons 6273 * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be 6274 * handled by the AP is reached. 6275 * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. 6276 */ 6277 enum nl80211_connect_failed_reason { 6278 NL80211_CONN_FAIL_MAX_CLIENTS, 6279 NL80211_CONN_FAIL_BLOCKED_CLIENT, 6280 }; 6281 6282 /** 6283 * enum nl80211_timeout_reason - timeout reasons 6284 * 6285 * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. 6286 * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. 6287 * @NL80211_TIMEOUT_AUTH: Authentication timed out. 6288 * @NL80211_TIMEOUT_ASSOC: Association timed out. 6289 */ 6290 enum nl80211_timeout_reason { 6291 NL80211_TIMEOUT_UNSPECIFIED, 6292 NL80211_TIMEOUT_SCAN, 6293 NL80211_TIMEOUT_AUTH, 6294 NL80211_TIMEOUT_ASSOC, 6295 }; 6296 6297 /** 6298 * enum nl80211_scan_flags - scan request control flags 6299 * 6300 * Scan request control flags are used to control the handling 6301 * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN 6302 * requests. 6303 * 6304 * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and 6305 * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only 6306 * one of them can be used in the request. 6307 * 6308 * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority 6309 * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning 6310 * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured 6311 * as AP and the beaconing has already been configured. This attribute is 6312 * dangerous because will destroy stations performance as a lot of frames 6313 * will be lost while scanning off-channel, therefore it must be used only 6314 * when really needed 6315 * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or 6316 * for scheduled scan: a different one for every scan iteration). When the 6317 * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and 6318 * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only 6319 * the masked bits will be preserved from the MAC address and the remainder 6320 * randomised. If the attributes are not given full randomisation (46 bits, 6321 * locally administered 1, multicast 0) is assumed. 6322 * This flag must not be requested when the feature isn't supported, check 6323 * the nl80211 feature flags for the device. 6324 * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS 6325 * request parameters IE in the probe request 6326 * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses 6327 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at 6328 * rate of at least 5.5M. In case non OCE AP is discovered in the channel, 6329 * only the first probe req in the channel will be sent in high rate. 6330 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request 6331 * tx deferral (dot11FILSProbeDelay shall be set to 15ms) 6332 * and suppression (if it has received a broadcast Probe Response frame, 6333 * Beacon frame or FILS Discovery frame from an AP that the STA considers 6334 * a suitable candidate for (re-)association - suitable in terms of 6335 * SSID and/or RSSI. 6336 * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to 6337 * accomplish the scan. Thus, this flag intends the driver to perform the 6338 * scan request with lesser span/duration. It is specific to the driver 6339 * implementations on how this is accomplished. Scan accuracy may get 6340 * impacted with this flag. 6341 * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume 6342 * optimal possible power. Drivers can resort to their specific means to 6343 * optimize the power. Scan accuracy may get impacted with this flag. 6344 * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan 6345 * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum 6346 * possible scan results. This flag hints the driver to use the best 6347 * possible scan configuration to improve the accuracy in scanning. 6348 * Latency and power use may get impacted with this flag. 6349 * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe 6350 * request frames from this scan to avoid correlation/tracking being 6351 * possible. 6352 * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to 6353 * only have supported rates and no additional capabilities (unless 6354 * added by userspace explicitly.) 6355 * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with 6356 * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means 6357 * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. 6358 * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by 6359 * 2.4/5 GHz APs 6360 */ 6361 enum nl80211_scan_flags { 6362 NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, 6363 NL80211_SCAN_FLAG_FLUSH = 1<<1, 6364 NL80211_SCAN_FLAG_AP = 1<<2, 6365 NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, 6366 NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, 6367 NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, 6368 NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, 6369 NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, 6370 NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, 6371 NL80211_SCAN_FLAG_LOW_POWER = 1<<9, 6372 NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, 6373 NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, 6374 NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, 6375 NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, 6376 NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, 6377 }; 6378 6379 /** 6380 * enum nl80211_acl_policy - access control policy 6381 * 6382 * Access control policy is applied on a MAC list set by 6383 * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to 6384 * be used with %NL80211_ATTR_ACL_POLICY. 6385 * 6386 * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are 6387 * listed in ACL, i.e. allow all the stations which are not listed 6388 * in ACL to authenticate. 6389 * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed 6390 * in ACL, i.e. deny all the stations which are not listed in ACL. 6391 */ 6392 enum nl80211_acl_policy { 6393 NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, 6394 NL80211_ACL_POLICY_DENY_UNLESS_LISTED, 6395 }; 6396 6397 /** 6398 * enum nl80211_smps_mode - SMPS mode 6399 * 6400 * Requested SMPS mode (for AP mode) 6401 * 6402 * @NL80211_SMPS_OFF: SMPS off (use all antennas). 6403 * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) 6404 * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and 6405 * turn on other antennas after CTS/RTS). 6406 */ 6407 enum nl80211_smps_mode { 6408 NL80211_SMPS_OFF, 6409 NL80211_SMPS_STATIC, 6410 NL80211_SMPS_DYNAMIC, 6411 6412 __NL80211_SMPS_AFTER_LAST, 6413 NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 6414 }; 6415 6416 /** 6417 * enum nl80211_radar_event - type of radar event for DFS operation 6418 * 6419 * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace 6420 * about detected radars or success of the channel available check (CAC) 6421 * 6422 * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is 6423 * now unusable. 6424 * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, 6425 * the channel is now available. 6426 * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no 6427 * change to the channel status. 6428 * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is 6429 * over, channel becomes usable. 6430 * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this 6431 * non-operating channel is expired and no longer valid. New CAC must 6432 * be done on this channel before starting the operation. This is not 6433 * applicable for ETSI dfs domain where pre-CAC is valid for ever. 6434 * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, 6435 * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. 6436 */ 6437 enum nl80211_radar_event { 6438 NL80211_RADAR_DETECTED, 6439 NL80211_RADAR_CAC_FINISHED, 6440 NL80211_RADAR_CAC_ABORTED, 6441 NL80211_RADAR_NOP_FINISHED, 6442 NL80211_RADAR_PRE_CAC_EXPIRED, 6443 NL80211_RADAR_CAC_STARTED, 6444 }; 6445 6446 /** 6447 * enum nl80211_dfs_state - DFS states for channels 6448 * 6449 * Channel states used by the DFS code. 6450 * 6451 * @NL80211_DFS_USABLE: The channel can be used, but channel availability 6452 * check (CAC) must be performed before using it for AP or IBSS. 6453 * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it 6454 * is therefore marked as not available. 6455 * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. 6456 */ 6457 enum nl80211_dfs_state { 6458 NL80211_DFS_USABLE, 6459 NL80211_DFS_UNAVAILABLE, 6460 NL80211_DFS_AVAILABLE, 6461 }; 6462 6463 /** 6464 * enum nl80211_protocol_features - nl80211 protocol features 6465 * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting 6466 * wiphy dumps (if requested by the application with the attribute 6467 * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the 6468 * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or 6469 * %NL80211_ATTR_WDEV. 6470 */ 6471 enum nl80211_protocol_features { 6472 NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, 6473 }; 6474 6475 /** 6476 * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers 6477 * 6478 * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. 6479 * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. 6480 * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. 6481 * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. 6482 * @NUM_NL80211_CRIT_PROTO: must be kept last. 6483 */ 6484 enum nl80211_crit_proto_id { 6485 NL80211_CRIT_PROTO_UNSPEC, 6486 NL80211_CRIT_PROTO_DHCP, 6487 NL80211_CRIT_PROTO_EAPOL, 6488 NL80211_CRIT_PROTO_APIPA, 6489 /* add other protocols before this one */ 6490 NUM_NL80211_CRIT_PROTO 6491 }; 6492 6493 /* maximum duration for critical protocol measures */ 6494 #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ 6495 6496 /** 6497 * enum nl80211_rxmgmt_flags - flags for received management frame. 6498 * 6499 * Used by cfg80211_rx_mgmt() 6500 * 6501 * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. 6502 * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload 6503 * the authentication. Exclusively defined for host drivers that 6504 * advertises the SME functionality but would like the userspace 6505 * to handle certain authentication algorithms (e.g. SAE). 6506 */ 6507 enum nl80211_rxmgmt_flags { 6508 NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, 6509 NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, 6510 }; 6511 6512 /* 6513 * If this flag is unset, the lower 24 bits are an OUI, if set 6514 * a Linux nl80211 vendor ID is used (no such IDs are allocated 6515 * yet, so that's not valid so far) 6516 */ 6517 #define NL80211_VENDOR_ID_IS_LINUX 0x80000000 6518 6519 /** 6520 * struct nl80211_vendor_cmd_info - vendor command data 6521 * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the 6522 * value is a 24-bit OUI; if it is set then a separately allocated ID 6523 * may be used, but no such IDs are allocated yet. New IDs should be 6524 * added to this file when needed. 6525 * @subcmd: sub-command ID for the command 6526 */ 6527 struct nl80211_vendor_cmd_info { 6528 __u32 vendor_id; 6529 __u32 subcmd; 6530 }; 6531 6532 /** 6533 * enum nl80211_tdls_peer_capability - TDLS peer flags. 6534 * 6535 * Used by tdls_mgmt() to determine which conditional elements need 6536 * to be added to TDLS Setup frames. 6537 * 6538 * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. 6539 * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. 6540 * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. 6541 * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. 6542 */ 6543 enum nl80211_tdls_peer_capability { 6544 NL80211_TDLS_PEER_HT = 1<<0, 6545 NL80211_TDLS_PEER_VHT = 1<<1, 6546 NL80211_TDLS_PEER_WMM = 1<<2, 6547 NL80211_TDLS_PEER_HE = 1<<3, 6548 }; 6549 6550 /** 6551 * enum nl80211_sched_scan_plan - scanning plan for scheduled scan 6552 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved 6553 * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In 6554 * seconds (u32). 6555 * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this 6556 * scan plan (u32). The last scan plan must not specify this attribute 6557 * because it will run infinitely. A value of zero is invalid as it will 6558 * make the scan plan meaningless. 6559 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number 6560 * currently defined 6561 * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use 6562 */ 6563 enum nl80211_sched_scan_plan { 6564 __NL80211_SCHED_SCAN_PLAN_INVALID, 6565 NL80211_SCHED_SCAN_PLAN_INTERVAL, 6566 NL80211_SCHED_SCAN_PLAN_ITERATIONS, 6567 6568 /* keep last */ 6569 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, 6570 NL80211_SCHED_SCAN_PLAN_MAX = 6571 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 6572 }; 6573 6574 /** 6575 * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. 6576 * 6577 * @band: band of BSS that must match for RSSI value adjustment. The value 6578 * of this field is according to &enum nl80211_band. 6579 * @delta: value used to adjust the RSSI value of matching BSS in dB. 6580 */ 6581 struct nl80211_bss_select_rssi_adjust { 6582 __u8 band; 6583 __s8 delta; 6584 } __attribute__((packed)); 6585 6586 /** 6587 * enum nl80211_bss_select_attr - attributes for bss selection. 6588 * 6589 * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. 6590 * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection 6591 * is requested. 6592 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS 6593 * selection should be done such that the specified band is preferred. 6594 * When there are multiple BSS-es in the preferred band, the driver 6595 * shall use RSSI-based BSS selection as a second step. The value of 6596 * this attribute is according to &enum nl80211_band (u32). 6597 * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for 6598 * BSS-es in the specified band is to be adjusted before doing 6599 * RSSI-based BSS selection. The attribute value is a packed structure 6600 * value as specified by &struct nl80211_bss_select_rssi_adjust. 6601 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. 6602 * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. 6603 * 6604 * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT 6605 * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour 6606 * which the driver shall use. 6607 */ 6608 enum nl80211_bss_select_attr { 6609 __NL80211_BSS_SELECT_ATTR_INVALID, 6610 NL80211_BSS_SELECT_ATTR_RSSI, 6611 NL80211_BSS_SELECT_ATTR_BAND_PREF, 6612 NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, 6613 6614 /* keep last */ 6615 __NL80211_BSS_SELECT_ATTR_AFTER_LAST, 6616 NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 6617 }; 6618 6619 /** 6620 * enum nl80211_nan_function_type - NAN function type 6621 * 6622 * Defines the function type of a NAN function 6623 * 6624 * @NL80211_NAN_FUNC_PUBLISH: function is publish 6625 * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe 6626 * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up 6627 */ 6628 enum nl80211_nan_function_type { 6629 NL80211_NAN_FUNC_PUBLISH, 6630 NL80211_NAN_FUNC_SUBSCRIBE, 6631 NL80211_NAN_FUNC_FOLLOW_UP, 6632 6633 /* keep last */ 6634 __NL80211_NAN_FUNC_TYPE_AFTER_LAST, 6635 NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, 6636 }; 6637 6638 /** 6639 * enum nl80211_nan_publish_type - NAN publish tx type 6640 * 6641 * Defines how to send publish Service Discovery Frames 6642 * 6643 * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited 6644 * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited 6645 */ 6646 enum nl80211_nan_publish_type { 6647 NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, 6648 NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, 6649 }; 6650 6651 /** 6652 * enum nl80211_nan_func_term_reason - NAN functions termination reason 6653 * 6654 * Defines termination reasons of a NAN function 6655 * 6656 * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user 6657 * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout 6658 * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored 6659 */ 6660 enum nl80211_nan_func_term_reason { 6661 NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, 6662 NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, 6663 NL80211_NAN_FUNC_TERM_REASON_ERROR, 6664 }; 6665 6666 #define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 6667 #define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff 6668 #define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff 6669 6670 /** 6671 * enum nl80211_nan_func_attributes - NAN function attributes 6672 * @__NL80211_NAN_FUNC_INVALID: invalid 6673 * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). 6674 * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as 6675 * specified in NAN spec. This is a binary attribute. 6676 * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is 6677 * publish. Defines the transmission type for the publish Service Discovery 6678 * Frame, see &enum nl80211_nan_publish_type. Its type is u8. 6679 * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited 6680 * publish. Should the solicited publish Service Discovery Frame be sent to 6681 * the NAN Broadcast address. This is a flag. 6682 * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is 6683 * subscribe. Is the subscribe active. This is a flag. 6684 * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. 6685 * The instance ID for the follow up Service Discovery Frame. This is u8. 6686 * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type 6687 * is follow up. This is a u8. 6688 * The requestor instance ID for the follow up Service Discovery Frame. 6689 * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the 6690 * follow up Service Discovery Frame. This is a binary attribute. 6691 * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a 6692 * close range. The range itself (RSSI) is defined by the device. 6693 * This is a flag. 6694 * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should 6695 * stay active. If not present infinite TTL is assumed. This is a u32. 6696 * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service 6697 * specific info. This is a binary attribute. 6698 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. 6699 * See &enum nl80211_nan_srf_attributes. 6700 * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested 6701 * attribute. It is a list of binary values. 6702 * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a 6703 * nested attribute. It is a list of binary values. 6704 * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. 6705 * Its type is u8 and it cannot be 0. 6706 * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. 6707 * See &enum nl80211_nan_func_term_reason. 6708 * 6709 * @NUM_NL80211_NAN_FUNC_ATTR: internal 6710 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute 6711 */ 6712 enum nl80211_nan_func_attributes { 6713 __NL80211_NAN_FUNC_INVALID, 6714 NL80211_NAN_FUNC_TYPE, 6715 NL80211_NAN_FUNC_SERVICE_ID, 6716 NL80211_NAN_FUNC_PUBLISH_TYPE, 6717 NL80211_NAN_FUNC_PUBLISH_BCAST, 6718 NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, 6719 NL80211_NAN_FUNC_FOLLOW_UP_ID, 6720 NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, 6721 NL80211_NAN_FUNC_FOLLOW_UP_DEST, 6722 NL80211_NAN_FUNC_CLOSE_RANGE, 6723 NL80211_NAN_FUNC_TTL, 6724 NL80211_NAN_FUNC_SERVICE_INFO, 6725 NL80211_NAN_FUNC_SRF, 6726 NL80211_NAN_FUNC_RX_MATCH_FILTER, 6727 NL80211_NAN_FUNC_TX_MATCH_FILTER, 6728 NL80211_NAN_FUNC_INSTANCE_ID, 6729 NL80211_NAN_FUNC_TERM_REASON, 6730 6731 /* keep last */ 6732 NUM_NL80211_NAN_FUNC_ATTR, 6733 NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 6734 }; 6735 6736 /** 6737 * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes 6738 * @__NL80211_NAN_SRF_INVALID: invalid 6739 * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. 6740 * This is a flag. 6741 * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if 6742 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. 6743 * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if 6744 * %NL80211_NAN_SRF_BF is present. This is a u8. 6745 * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if 6746 * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested 6747 * attribute. Each nested attribute is a MAC address. 6748 * @NUM_NL80211_NAN_SRF_ATTR: internal 6749 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute 6750 */ 6751 enum nl80211_nan_srf_attributes { 6752 __NL80211_NAN_SRF_INVALID, 6753 NL80211_NAN_SRF_INCLUDE, 6754 NL80211_NAN_SRF_BF, 6755 NL80211_NAN_SRF_BF_IDX, 6756 NL80211_NAN_SRF_MAC_ADDRS, 6757 6758 /* keep last */ 6759 NUM_NL80211_NAN_SRF_ATTR, 6760 NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, 6761 }; 6762 6763 /** 6764 * enum nl80211_nan_match_attributes - NAN match attributes 6765 * @__NL80211_NAN_MATCH_INVALID: invalid 6766 * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the 6767 * match. This is a nested attribute. 6768 * See &enum nl80211_nan_func_attributes. 6769 * @NL80211_NAN_MATCH_FUNC_PEER: the peer function 6770 * that caused the match. This is a nested attribute. 6771 * See &enum nl80211_nan_func_attributes. 6772 * 6773 * @NUM_NL80211_NAN_MATCH_ATTR: internal 6774 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute 6775 */ 6776 enum nl80211_nan_match_attributes { 6777 __NL80211_NAN_MATCH_INVALID, 6778 NL80211_NAN_MATCH_FUNC_LOCAL, 6779 NL80211_NAN_MATCH_FUNC_PEER, 6780 6781 /* keep last */ 6782 NUM_NL80211_NAN_MATCH_ATTR, 6783 NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 6784 }; 6785 6786 /** 6787 * nl80211_external_auth_action - Action to perform with external 6788 * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. 6789 * @NL80211_EXTERNAL_AUTH_START: Start the authentication. 6790 * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. 6791 */ 6792 enum nl80211_external_auth_action { 6793 NL80211_EXTERNAL_AUTH_START, 6794 NL80211_EXTERNAL_AUTH_ABORT, 6795 }; 6796 6797 /** 6798 * enum nl80211_ftm_responder_attributes - fine timing measurement 6799 * responder attributes 6800 * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid 6801 * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled 6802 * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element 6803 * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), 6804 * i.e. starting with the measurement token 6805 * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element 6806 * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), 6807 * i.e. starting with the measurement token 6808 * @__NL80211_FTM_RESP_ATTR_LAST: Internal 6809 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. 6810 */ 6811 enum nl80211_ftm_responder_attributes { 6812 __NL80211_FTM_RESP_ATTR_INVALID, 6813 6814 NL80211_FTM_RESP_ATTR_ENABLED, 6815 NL80211_FTM_RESP_ATTR_LCI, 6816 NL80211_FTM_RESP_ATTR_CIVICLOC, 6817 6818 /* keep last */ 6819 __NL80211_FTM_RESP_ATTR_LAST, 6820 NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, 6821 }; 6822 6823 /* 6824 * enum nl80211_ftm_responder_stats - FTM responder statistics 6825 * 6826 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS 6827 * when getting FTM responder statistics. 6828 * 6829 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved 6830 * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames 6831 * were ssfully answered (u32) 6832 * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the 6833 * frames were successfully answered (u32) 6834 * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) 6835 * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) 6836 * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) 6837 * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an 6838 * indication of how much time the responder was busy (u64, msec) 6839 * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - 6840 * triggers from initiators that didn't finish successfully the negotiation 6841 * phase with the responder (u32) 6842 * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests 6843 * - initiator asks for a new scheduling although it already has scheduled 6844 * FTM slot (u32) 6845 * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of 6846 * scheduled window (u32) 6847 * @NL80211_FTM_STATS_PAD: used for padding, ignore 6848 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 6849 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute 6850 */ 6851 enum nl80211_ftm_responder_stats { 6852 __NL80211_FTM_STATS_INVALID, 6853 NL80211_FTM_STATS_SUCCESS_NUM, 6854 NL80211_FTM_STATS_PARTIAL_NUM, 6855 NL80211_FTM_STATS_FAILED_NUM, 6856 NL80211_FTM_STATS_ASAP_NUM, 6857 NL80211_FTM_STATS_NON_ASAP_NUM, 6858 NL80211_FTM_STATS_TOTAL_DURATION_MSEC, 6859 NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, 6860 NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, 6861 NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, 6862 NL80211_FTM_STATS_PAD, 6863 6864 /* keep last */ 6865 __NL80211_FTM_STATS_AFTER_LAST, 6866 NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 6867 }; 6868 6869 /** 6870 * enum nl80211_preamble - frame preamble types 6871 * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble 6872 * @NL80211_PREAMBLE_HT: HT preamble 6873 * @NL80211_PREAMBLE_VHT: VHT preamble 6874 * @NL80211_PREAMBLE_DMG: DMG preamble 6875 * @NL80211_PREAMBLE_HE: HE preamble 6876 */ 6877 enum nl80211_preamble { 6878 NL80211_PREAMBLE_LEGACY, 6879 NL80211_PREAMBLE_HT, 6880 NL80211_PREAMBLE_VHT, 6881 NL80211_PREAMBLE_DMG, 6882 NL80211_PREAMBLE_HE, 6883 }; 6884 6885 /** 6886 * enum nl80211_peer_measurement_type - peer measurement types 6887 * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use 6888 * these numbers also for attributes 6889 * 6890 * @NL80211_PMSR_TYPE_FTM: flight time measurement 6891 * 6892 * @NUM_NL80211_PMSR_TYPES: internal 6893 * @NL80211_PMSR_TYPE_MAX: highest type number 6894 */ 6895 enum nl80211_peer_measurement_type { 6896 NL80211_PMSR_TYPE_INVALID, 6897 6898 NL80211_PMSR_TYPE_FTM, 6899 6900 NUM_NL80211_PMSR_TYPES, 6901 NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 6902 }; 6903 6904 /** 6905 * enum nl80211_peer_measurement_status - peer measurement status 6906 * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully 6907 * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused 6908 * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out 6909 * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent 6910 * reason may be available in the response data 6911 */ 6912 enum nl80211_peer_measurement_status { 6913 NL80211_PMSR_STATUS_SUCCESS, 6914 NL80211_PMSR_STATUS_REFUSED, 6915 NL80211_PMSR_STATUS_TIMEOUT, 6916 NL80211_PMSR_STATUS_FAILURE, 6917 }; 6918 6919 /** 6920 * enum nl80211_peer_measurement_req - peer measurement request attributes 6921 * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid 6922 * 6923 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement 6924 * type-specific request data inside. The attributes used are from the 6925 * enums named nl80211_peer_measurement_<type>_req. 6926 * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported 6927 * (flag attribute) 6928 * 6929 * @NUM_NL80211_PMSR_REQ_ATTRS: internal 6930 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number 6931 */ 6932 enum nl80211_peer_measurement_req { 6933 __NL80211_PMSR_REQ_ATTR_INVALID, 6934 6935 NL80211_PMSR_REQ_ATTR_DATA, 6936 NL80211_PMSR_REQ_ATTR_GET_AP_TSF, 6937 6938 /* keep last */ 6939 NUM_NL80211_PMSR_REQ_ATTRS, 6940 NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 6941 }; 6942 6943 /** 6944 * enum nl80211_peer_measurement_resp - peer measurement response attributes 6945 * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid 6946 * 6947 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement 6948 * type-specific results inside. The attributes used are from the enums 6949 * named nl80211_peer_measurement_<type>_resp. 6950 * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status 6951 * (using values from &enum nl80211_peer_measurement_status.) 6952 * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the 6953 * result was measured; this value is not expected to be accurate to 6954 * more than 20ms. (u64, nanoseconds) 6955 * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface 6956 * doing the measurement is connected to when the result was measured. 6957 * This shall be accurately reported if supported and requested 6958 * (u64, usec) 6959 * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially 6960 * (*e.g. with FTM per-burst data) this flag will be cleared on all but 6961 * the last result; if all results are combined it's set on the single 6962 * result. 6963 * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore 6964 * 6965 * @NUM_NL80211_PMSR_RESP_ATTRS: internal 6966 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number 6967 */ 6968 enum nl80211_peer_measurement_resp { 6969 __NL80211_PMSR_RESP_ATTR_INVALID, 6970 6971 NL80211_PMSR_RESP_ATTR_DATA, 6972 NL80211_PMSR_RESP_ATTR_STATUS, 6973 NL80211_PMSR_RESP_ATTR_HOST_TIME, 6974 NL80211_PMSR_RESP_ATTR_AP_TSF, 6975 NL80211_PMSR_RESP_ATTR_FINAL, 6976 NL80211_PMSR_RESP_ATTR_PAD, 6977 6978 /* keep last */ 6979 NUM_NL80211_PMSR_RESP_ATTRS, 6980 NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 6981 }; 6982 6983 /** 6984 * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement 6985 * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid 6986 * 6987 * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address 6988 * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level 6989 * attributes like %NL80211_ATTR_WIPHY_FREQ etc. 6990 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by 6991 * measurement type, with attributes from the 6992 * &enum nl80211_peer_measurement_req inside. 6993 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by 6994 * measurement type, with attributes from the 6995 * &enum nl80211_peer_measurement_resp inside. 6996 * 6997 * @NUM_NL80211_PMSR_PEER_ATTRS: internal 6998 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number 6999 */ 7000 enum nl80211_peer_measurement_peer_attrs { 7001 __NL80211_PMSR_PEER_ATTR_INVALID, 7002 7003 NL80211_PMSR_PEER_ATTR_ADDR, 7004 NL80211_PMSR_PEER_ATTR_CHAN, 7005 NL80211_PMSR_PEER_ATTR_REQ, 7006 NL80211_PMSR_PEER_ATTR_RESP, 7007 7008 /* keep last */ 7009 NUM_NL80211_PMSR_PEER_ATTRS, 7010 NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, 7011 }; 7012 7013 /** 7014 * enum nl80211_peer_measurement_attrs - peer measurement attributes 7015 * @__NL80211_PMSR_ATTR_INVALID: invalid 7016 * 7017 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability 7018 * advertisement only, indicates the maximum number of peers 7019 * measurements can be done with in a single request 7020 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability 7021 * indicating that the connected AP's TSF can be reported in 7022 * measurement results 7023 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability 7024 * indicating that MAC address randomization is supported. 7025 * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, 7026 * this contains a nesting indexed by measurement type, and 7027 * type-specific capabilities inside, which are from the enums 7028 * named nl80211_peer_measurement_<type>_capa. 7029 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is 7030 * meaningless, just a list of peers to measure with, with the 7031 * sub-attributes taken from 7032 * &enum nl80211_peer_measurement_peer_attrs. 7033 * 7034 * @NUM_NL80211_PMSR_ATTR: internal 7035 * @NL80211_PMSR_ATTR_MAX: highest attribute number 7036 */ 7037 enum nl80211_peer_measurement_attrs { 7038 __NL80211_PMSR_ATTR_INVALID, 7039 7040 NL80211_PMSR_ATTR_MAX_PEERS, 7041 NL80211_PMSR_ATTR_REPORT_AP_TSF, 7042 NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, 7043 NL80211_PMSR_ATTR_TYPE_CAPA, 7044 NL80211_PMSR_ATTR_PEERS, 7045 7046 /* keep last */ 7047 NUM_NL80211_PMSR_ATTR, 7048 NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 7049 }; 7050 7051 /** 7052 * enum nl80211_peer_measurement_ftm_capa - FTM capabilities 7053 * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid 7054 * 7055 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode 7056 * is supported 7057 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP 7058 * mode is supported 7059 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI 7060 * data can be requested during the measurement 7061 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic 7062 * location data can be requested during the measurement 7063 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits 7064 * from &enum nl80211_preamble. 7065 * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from 7066 * &enum nl80211_chan_width indicating the supported channel 7067 * bandwidths for FTM. Note that a higher channel bandwidth may be 7068 * configured to allow for other measurements types with different 7069 * bandwidth requirement in the same measurement. 7070 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating 7071 * the maximum bursts exponent that can be used (if not present anything 7072 * is valid) 7073 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating 7074 * the maximum FTMs per burst (if not present anything is valid) 7075 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if 7076 * trigger based ranging measurement is supported 7077 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating 7078 * if non trigger based ranging measurement is supported 7079 * 7080 * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal 7081 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number 7082 */ 7083 enum nl80211_peer_measurement_ftm_capa { 7084 __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, 7085 7086 NL80211_PMSR_FTM_CAPA_ATTR_ASAP, 7087 NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, 7088 NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, 7089 NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, 7090 NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, 7091 NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, 7092 NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, 7093 NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, 7094 NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, 7095 NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, 7096 7097 /* keep last */ 7098 NUM_NL80211_PMSR_FTM_CAPA_ATTR, 7099 NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 7100 }; 7101 7102 /** 7103 * enum nl80211_peer_measurement_ftm_req - FTM request attributes 7104 * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid 7105 * 7106 * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) 7107 * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see 7108 * &enum nl80211_preamble), optional for DMG (u32) 7109 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in 7110 * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" 7111 * (u8, 0-15, optional with default 15 i.e. "no preference") 7112 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units 7113 * of 100ms (u16, optional with default 0) 7114 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 7115 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with 7116 * default 15 i.e. "no preference") 7117 * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames 7118 * requested per burst 7119 * (u8, 0-31, optional with default 0 i.e. "no preference") 7120 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries 7121 * (u8, default 3) 7122 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) 7123 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data 7124 * (flag) 7125 * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging 7126 * measurement (flag). 7127 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are 7128 * mutually exclusive. 7129 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 7130 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 7131 * ranging will be used. 7132 * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based 7133 * ranging measurement (flag) 7134 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are 7135 * mutually exclusive. 7136 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 7137 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 7138 * ranging will be used. 7139 * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only 7140 * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or 7141 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. 7142 * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the 7143 * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED 7144 * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. 7145 * 7146 * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal 7147 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number 7148 */ 7149 enum nl80211_peer_measurement_ftm_req { 7150 __NL80211_PMSR_FTM_REQ_ATTR_INVALID, 7151 7152 NL80211_PMSR_FTM_REQ_ATTR_ASAP, 7153 NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, 7154 NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, 7155 NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, 7156 NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, 7157 NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, 7158 NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, 7159 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, 7160 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, 7161 NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, 7162 NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, 7163 NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, 7164 NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, 7165 7166 /* keep last */ 7167 NUM_NL80211_PMSR_FTM_REQ_ATTR, 7168 NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 7169 }; 7170 7171 /** 7172 * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons 7173 * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used 7174 * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder 7175 * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement 7176 * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is 7177 * on a different channel, so can't measure (if we didn't know, we'd 7178 * try and get no response) 7179 * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM 7180 * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps 7181 * received 7182 * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry 7183 * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) 7184 * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed 7185 * by the peer and are no longer supported 7186 */ 7187 enum nl80211_peer_measurement_ftm_failure_reasons { 7188 NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, 7189 NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, 7190 NL80211_PMSR_FTM_FAILURE_REJECTED, 7191 NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, 7192 NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, 7193 NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, 7194 NL80211_PMSR_FTM_FAILURE_PEER_BUSY, 7195 NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, 7196 }; 7197 7198 /** 7199 * enum nl80211_peer_measurement_ftm_resp - FTM response attributes 7200 * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid 7201 * 7202 * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason 7203 * (u32, optional) 7204 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported 7205 * as separate results then it will be the burst index 0...(N-1) and 7206 * the top level will indicate partial results (u32) 7207 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames 7208 * transmitted (u32, optional) 7209 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames 7210 * that were acknowleged (u32, optional) 7211 * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the 7212 * busy peer (u32, seconds) 7213 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent 7214 * used by the responder (similar to request, u8) 7215 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by 7216 * the responder (similar to request, u8) 7217 * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used 7218 * by the responder (similar to request, u8) 7219 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action 7220 * frames (optional, s32, 1/2 dBm) 7221 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action 7222 * frames (optional, s32, 1/2 dBm) 7223 * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the 7224 * FTM action frame (optional, nested, using &enum nl80211_rate_info 7225 * attributes) 7226 * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM 7227 * action frame (optional, nested, using &enum nl80211_rate_info attrs) 7228 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional 7229 * but one of RTT/DIST must be present) 7230 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that 7231 * standard deviation is the square root of variance, optional) 7232 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, 7233 * optional) 7234 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional 7235 * but one of RTT/DIST must be present) 7236 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note 7237 * that standard deviation is the square root of variance, optional) 7238 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) 7239 * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); 7240 * this is the contents of the Measurement Report Element (802.11-2016 7241 * 9.4.2.22.1) starting with the Measurement Token, with Measurement 7242 * Type 8. 7243 * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer 7244 * (binary, optional); 7245 * this is the contents of the Measurement Report Element (802.11-2016 7246 * 9.4.2.22.1) starting with the Measurement Token, with Measurement 7247 * Type 11. 7248 * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only 7249 * 7250 * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal 7251 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number 7252 */ 7253 enum nl80211_peer_measurement_ftm_resp { 7254 __NL80211_PMSR_FTM_RESP_ATTR_INVALID, 7255 7256 NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, 7257 NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, 7258 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, 7259 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, 7260 NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, 7261 NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, 7262 NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, 7263 NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, 7264 NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, 7265 NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, 7266 NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, 7267 NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, 7268 NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, 7269 NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, 7270 NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, 7271 NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, 7272 NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, 7273 NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, 7274 NL80211_PMSR_FTM_RESP_ATTR_LCI, 7275 NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, 7276 NL80211_PMSR_FTM_RESP_ATTR_PAD, 7277 7278 /* keep last */ 7279 NUM_NL80211_PMSR_FTM_RESP_ATTR, 7280 NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 7281 }; 7282 7283 /** 7284 * enum nl80211_obss_pd_attributes - OBSS packet detection attributes 7285 * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid 7286 * 7287 * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. 7288 * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. 7289 * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum 7290 * tx power offset. 7291 * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color 7292 * values used by members of the SRG. 7293 * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial 7294 * BSSID values used by members of the SRG. 7295 * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. 7296 * 7297 * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal 7298 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. 7299 */ 7300 enum nl80211_obss_pd_attributes { 7301 __NL80211_HE_OBSS_PD_ATTR_INVALID, 7302 7303 NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, 7304 NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, 7305 NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, 7306 NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, 7307 NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, 7308 NL80211_HE_OBSS_PD_ATTR_SR_CTRL, 7309 7310 /* keep last */ 7311 __NL80211_HE_OBSS_PD_ATTR_LAST, 7312 NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, 7313 }; 7314 7315 /** 7316 * enum nl80211_bss_color_attributes - BSS Color attributes 7317 * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid 7318 * 7319 * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. 7320 * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. 7321 * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. 7322 * 7323 * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal 7324 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. 7325 */ 7326 enum nl80211_bss_color_attributes { 7327 __NL80211_HE_BSS_COLOR_ATTR_INVALID, 7328 7329 NL80211_HE_BSS_COLOR_ATTR_COLOR, 7330 NL80211_HE_BSS_COLOR_ATTR_DISABLED, 7331 NL80211_HE_BSS_COLOR_ATTR_PARTIAL, 7332 7333 /* keep last */ 7334 __NL80211_HE_BSS_COLOR_ATTR_LAST, 7335 NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, 7336 }; 7337 7338 /** 7339 * enum nl80211_iftype_akm_attributes - interface type AKM attributes 7340 * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid 7341 * 7342 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag 7343 * attribute for each interface type that supports AKM suites specified in 7344 * %NL80211_IFTYPE_AKM_ATTR_SUITES 7345 * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported 7346 * AKM suites for the specified interface types. 7347 * 7348 * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal 7349 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. 7350 */ 7351 enum nl80211_iftype_akm_attributes { 7352 __NL80211_IFTYPE_AKM_ATTR_INVALID, 7353 7354 NL80211_IFTYPE_AKM_ATTR_IFTYPES, 7355 NL80211_IFTYPE_AKM_ATTR_SUITES, 7356 7357 /* keep last */ 7358 __NL80211_IFTYPE_AKM_ATTR_LAST, 7359 NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, 7360 }; 7361 7362 /** 7363 * enum nl80211_fils_discovery_attributes - FILS discovery configuration 7364 * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. 7365 * 7366 * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid 7367 * 7368 * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). 7369 * Allowed range: 0..10000 (TU = Time Unit) 7370 * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). 7371 * Allowed range: 0..10000 (TU = Time Unit) 7372 * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action 7373 * frame including the headers. 7374 * 7375 * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal 7376 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute 7377 */ 7378 enum nl80211_fils_discovery_attributes { 7379 __NL80211_FILS_DISCOVERY_ATTR_INVALID, 7380 7381 NL80211_FILS_DISCOVERY_ATTR_INT_MIN, 7382 NL80211_FILS_DISCOVERY_ATTR_INT_MAX, 7383 NL80211_FILS_DISCOVERY_ATTR_TMPL, 7384 7385 /* keep last */ 7386 __NL80211_FILS_DISCOVERY_ATTR_LAST, 7387 NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 7388 }; 7389 7390 /* 7391 * FILS discovery template minimum length with action frame headers and 7392 * mandatory fields. 7393 */ 7394 #define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 7395 7396 /** 7397 * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe 7398 * response configuration. Applicable only in 6GHz. 7399 * 7400 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid 7401 * 7402 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). 7403 * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 7404 * 26.17.2.3.2 (AP behavior for fast passive scanning). 7405 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response 7406 * frame template (binary). 7407 * 7408 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal 7409 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute 7410 */ 7411 enum nl80211_unsol_bcast_probe_resp_attributes { 7412 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, 7413 7414 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, 7415 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, 7416 7417 /* keep last */ 7418 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, 7419 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = 7420 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 7421 }; 7422 7423 /** 7424 * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE 7425 * derivation. Applicable only when WPA3-Personal SAE authentication is 7426 * used. 7427 * 7428 * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that 7429 * attribute is not present from userspace. 7430 * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only 7431 * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only 7432 * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element 7433 * can be used. 7434 */ 7435 enum nl80211_sae_pwe_mechanism { 7436 NL80211_SAE_PWE_UNSPECIFIED, 7437 NL80211_SAE_PWE_HUNT_AND_PECK, 7438 NL80211_SAE_PWE_HASH_TO_ELEMENT, 7439 NL80211_SAE_PWE_BOTH, 7440 }; 7441 7442 /** 7443 * enum nl80211_sar_type - type of SAR specs 7444 * 7445 * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit 7446 * 7447 */ 7448 enum nl80211_sar_type { 7449 NL80211_SAR_TYPE_POWER, 7450 7451 /* add new type here */ 7452 7453 /* Keep last */ 7454 NUM_NL80211_SAR_TYPE, 7455 }; 7456 7457 /** 7458 * enum nl80211_sar_attrs - Attributes for SAR spec 7459 * 7460 * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. 7461 * 7462 * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power 7463 * limit specifications. Each specification contains a set 7464 * of %nl80211_sar_specs_attrs. 7465 * 7466 * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER 7467 * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. 7468 * 7469 * For sar_capa dump, it contains array of 7470 * %NL80211_SAR_ATTR_SPECS_START_FREQ 7471 * and %NL80211_SAR_ATTR_SPECS_END_FREQ. 7472 * 7473 * @__NL80211_SAR_ATTR_LAST: Internal 7474 * @NL80211_SAR_ATTR_MAX: highest sar attribute 7475 * 7476 * These attributes are used with %NL80211_CMD_SET_SAR_SPEC 7477 */ 7478 enum nl80211_sar_attrs { 7479 __NL80211_SAR_ATTR_INVALID, 7480 7481 NL80211_SAR_ATTR_TYPE, 7482 NL80211_SAR_ATTR_SPECS, 7483 7484 __NL80211_SAR_ATTR_LAST, 7485 NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, 7486 }; 7487 7488 /** 7489 * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs 7490 * 7491 * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual 7492 * power limit value in units of 0.25 dBm if type is 7493 * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). 7494 * 0 means userspace doesn't have SAR limitation on this associated range. 7495 * 7496 * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the 7497 * index of exported freq range table and the associated power limitation 7498 * is applied to this range. 7499 * 7500 * Userspace isn't required to set all the ranges advertised by WLAN driver, 7501 * and userspace can skip some certain ranges. These skipped ranges don't 7502 * have SAR limitations, and they are same as setting the 7503 * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any 7504 * value higher than regulatory allowed value just means SAR power 7505 * limitation is removed, but it's required to set at least one range. 7506 * It's not allowed to set duplicated range in one SET operation. 7507 * 7508 * Every SET operation overwrites previous SET operation. 7509 * 7510 * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start 7511 * frequency of this range edge when registering SAR capability to wiphy. 7512 * It's not a channel center frequency. The unit is kHz. 7513 * 7514 * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end 7515 * frequency of this range edge when registering SAR capability to wiphy. 7516 * It's not a channel center frequency. The unit is kHz. 7517 * 7518 * @__NL80211_SAR_ATTR_SPECS_LAST: Internal 7519 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute 7520 */ 7521 enum nl80211_sar_specs_attrs { 7522 __NL80211_SAR_ATTR_SPECS_INVALID, 7523 7524 NL80211_SAR_ATTR_SPECS_POWER, 7525 NL80211_SAR_ATTR_SPECS_RANGE_INDEX, 7526 NL80211_SAR_ATTR_SPECS_START_FREQ, 7527 NL80211_SAR_ATTR_SPECS_END_FREQ, 7528 7529 __NL80211_SAR_ATTR_SPECS_LAST, 7530 NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, 7531 }; 7532 7533 /** 7534 * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced 7535 * multi-BSSID advertisements (EMA) in AP mode. 7536 * Kernel uses some of these attributes to advertise driver's support for 7537 * MBSSID and EMA. 7538 * Remaining attributes should be used by the userspace to configure the 7539 * features. 7540 * 7541 * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid 7542 * 7543 * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise 7544 * the maximum number of MBSSID interfaces supported by the driver. 7545 * Driver should indicate MBSSID support by setting 7546 * wiphy->mbssid_max_interfaces to a value more than or equal to 2. 7547 * 7548 * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel 7549 * to advertise the maximum profile periodicity supported by the driver 7550 * if EMA is enabled. Driver should indicate EMA support to the userspace 7551 * by setting wiphy->ema_max_profile_periodicity to 7552 * a non-zero value. 7553 * 7554 * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of 7555 * this BSS (u8) in the multiple BSSID set. 7556 * Value must be set to 0 for the transmitting interface and non-zero for 7557 * all non-transmitting interfaces. The userspace will be responsible 7558 * for using unique indices for the interfaces. 7559 * Range: 0 to wiphy->mbssid_max_interfaces-1. 7560 * 7561 * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for 7562 * a non-transmitted profile which provides the interface index (u32) of 7563 * the transmitted profile. The value must match one of the interface 7564 * indices advertised by the kernel. Optional if the interface being set up 7565 * is the transmitting one, however, if provided then the value must match 7566 * the interface index of the same. 7567 * 7568 * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. 7569 * Setting this flag is permitted only if the driver advertises EMA support 7570 * by setting wiphy->ema_max_profile_periodicity to non-zero. 7571 * 7572 * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal 7573 * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute 7574 */ 7575 enum nl80211_mbssid_config_attributes { 7576 __NL80211_MBSSID_CONFIG_ATTR_INVALID, 7577 7578 NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, 7579 NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, 7580 NL80211_MBSSID_CONFIG_ATTR_INDEX, 7581 NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, 7582 NL80211_MBSSID_CONFIG_ATTR_EMA, 7583 7584 /* keep last */ 7585 __NL80211_MBSSID_CONFIG_ATTR_LAST, 7586 NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, 7587 }; 7588 7589 /** 7590 * enum nl80211_ap_settings_flags - AP settings flags 7591 * 7592 * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external 7593 * authentication. 7594 * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query 7595 * procedures offload to driver. If driver advertises 7596 * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall 7597 * ignore SA Query procedures and validations when this flag is set by 7598 * userspace. 7599 */ 7600 enum nl80211_ap_settings_flags { 7601 NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, 7602 NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, 7603 }; 7604 7605 #endif /* __LINUX_NL80211_H */ 7606