xref: /openbmc/linux/include/uapi/linux/fd.h (revision 1c2dd16a)
1 #ifndef _UAPI_LINUX_FD_H
2 #define _UAPI_LINUX_FD_H
3 
4 #include <linux/ioctl.h>
5 #include <linux/compiler.h>
6 
7 /* New file layout: Now the ioctl definitions immediately follow the
8  * definitions of the structures that they use */
9 
10 /*
11  * Geometry
12  */
13 struct floppy_struct {
14 	unsigned int	size,		/* nr of sectors total */
15 			sect,		/* sectors per track */
16 			head,		/* nr of heads */
17 			track,		/* nr of tracks */
18 			stretch;	/* bit 0 !=0 means double track steps */
19 					/* bit 1 != 0 means swap sides */
20 					/* bits 2..9 give the first sector */
21 					/*  number (the LSB is flipped) */
22 #define FD_STRETCH 1
23 #define FD_SWAPSIDES 2
24 #define FD_ZEROBASED 4
25 #define FD_SECTBASEMASK 0x3FC
26 #define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
27 #define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
28 
29 	unsigned char	gap,		/* gap1 size */
30 
31 			rate,		/* data rate. |= 0x40 for perpendicular */
32 #define FD_2M 0x4
33 #define FD_SIZECODEMASK 0x38
34 #define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
35 #define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
36 			     512 : 128 << FD_SIZECODE(floppy) )
37 #define FD_PERP 0x40
38 
39 			spec1,		/* stepping rate, head unload time */
40 			fmt_gap;	/* gap2 size */
41 	const char	* name; /* used only for predefined formats */
42 };
43 
44 
45 /* commands needing write access have 0x40 set */
46 /* commands needing super user access have 0x80 set */
47 
48 #define FDCLRPRM _IO(2, 0x41)
49 /* clear user-defined parameters */
50 
51 #define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
52 #define FDSETMEDIAPRM FDSETPRM
53 /* set user-defined parameters for current media */
54 
55 #define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
56 #define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
57 #define FDDEFMEDIAPRM FDDEFPRM
58 #define FDGETMEDIAPRM FDGETPRM
59 /* set/get disk parameters */
60 
61 
62 #define	FDMSGON  _IO(2,0x45)
63 #define	FDMSGOFF _IO(2,0x46)
64 /* issue/don't issue kernel messages on media type change */
65 
66 
67 /*
68  * Formatting (obsolete)
69  */
70 #define FD_FILL_BYTE 0xF6 /* format fill byte. */
71 
72 struct format_descr {
73 	unsigned int device,head,track;
74 };
75 
76 #define FDFMTBEG _IO(2,0x47)
77 /* begin formatting a disk */
78 #define	FDFMTTRK _IOW(2,0x48, struct format_descr)
79 /* format the specified track */
80 #define FDFMTEND _IO(2,0x49)
81 /* end formatting a disk */
82 
83 
84 /*
85  * Error thresholds
86  */
87 struct floppy_max_errors {
88 	unsigned int
89 	  abort,      /* number of errors to be reached before aborting */
90 	  read_track, /* maximal number of errors permitted to read an
91 		       * entire track at once */
92 	  reset,      /* maximal number of errors before a reset is tried */
93 	  recal,      /* maximal number of errors before a recalibrate is
94 		       * tried */
95 
96 	  /*
97 	   * Threshold for reporting FDC errors to the console.
98 	   * Setting this to zero may flood your screen when using
99 	   * ultra cheap floppies ;-)
100 	   */
101 	  reporting;
102 
103 };
104 
105 #define FDSETEMSGTRESH	_IO(2,0x4a)
106 /* set fdc error reporting threshold */
107 
108 #define FDFLUSH  _IO(2,0x4b)
109 /* flush buffers for media; either for verifying media, or for
110  * handling a media change without closing the file descriptor */
111 
112 #define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
113 #define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
114 /* set/get abortion and read_track threshold. See also floppy_drive_params
115  * structure */
116 
117 
118 typedef char floppy_drive_name[16];
119 #define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
120 /* get drive type: 5 1/4 or 3 1/2 */
121 
122 
123 /*
124  * Drive parameters (user modifiable)
125  */
126 struct floppy_drive_params {
127 	signed char cmos;		/* CMOS type */
128 
129 	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
130 	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
131 	 */
132 	unsigned long max_dtr;		/* Step rate, usec */
133 	unsigned long hlt;     		/* Head load/settle time, msec */
134 	unsigned long hut;     		/* Head unload time (remnant of
135 					 * 8" drives) */
136 	unsigned long srt;     		/* Step rate, usec */
137 
138 	unsigned long spinup;		/* time needed for spinup (expressed
139 					 * in jiffies) */
140 	unsigned long spindown;		/* timeout needed for spindown */
141 	unsigned char spindown_offset;	/* decides in which position the disk
142 					 * will stop */
143 	unsigned char select_delay;	/* delay to wait after select */
144 	unsigned char rps;		/* rotations per second */
145 	unsigned char tracks;		/* maximum number of tracks */
146 	unsigned long timeout;		/* timeout for interrupt requests */
147 
148 	unsigned char interleave_sect;	/* if there are more sectors, use
149 					 * interleave */
150 
151 	struct floppy_max_errors max_errors;
152 
153 	char flags;			/* various flags, including ftd_msg */
154 /*
155  * Announce successful media type detection and media information loss after
156  * disk changes.
157  * Also used to enable/disable printing of overrun warnings.
158  */
159 
160 #define FTD_MSG 0x10
161 #define FD_BROKEN_DCL 0x20
162 #define FD_DEBUG 0x02
163 #define FD_SILENT_DCL_CLEAR 0x4
164 #define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
165 				considerations */
166 
167 	char read_track;		/* use readtrack during probing? */
168 
169 /*
170  * Auto-detection. Each drive type has eight formats which are
171  * used in succession to try to read the disk. If the FDC cannot lock onto
172  * the disk, the next format is tried. This uses the variable 'probing'.
173  */
174 	short autodetect[8];		/* autodetected formats */
175 
176 	int checkfreq; /* how often should the drive be checked for disk
177 			* changes */
178 	int native_format; /* native format of this drive */
179 };
180 
181 enum {
182 	FD_NEED_TWADDLE_BIT,	/* more magic */
183 	FD_VERIFY_BIT,		/* inquire for write protection */
184 	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
185 				 * to clear media change status */
186 	FD_UNUSED_BIT,
187 	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
188 	FD_DISK_WRITABLE_BIT,	/* disk is writable */
189 	FD_OPEN_SHOULD_FAIL_BIT
190 };
191 
192 #define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
193 #define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
194 /* set/get drive parameters */
195 
196 
197 /*
198  * Current drive state (not directly modifiable by user, readonly)
199  */
200 struct floppy_drive_struct {
201 	unsigned long flags;
202 /* values for these flags */
203 #define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
204 #define FD_VERIFY (1 << FD_VERIFY_BIT)
205 #define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
206 #define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
207 #define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
208 
209 	unsigned long spinup_date;
210 	unsigned long select_date;
211 	unsigned long first_read_date;
212 	short probed_format;
213 	short track; /* current track */
214 	short maxblock; /* id of highest block read */
215 	short maxtrack; /* id of highest half track read */
216 	int generation; /* how many diskchanges? */
217 
218 /*
219  * (User-provided) media information is _not_ discarded after a media change
220  * if the corresponding keep_data flag is non-zero. Positive values are
221  * decremented after each probe.
222  */
223 	int keep_data;
224 
225 	/* Prevent "aliased" accesses. */
226 	int fd_ref;
227 	int fd_device;
228 	unsigned long last_checked; /* when was the drive last checked for a disk
229 			   * change? */
230 
231 	char *dmabuf;
232 	int bufblocks;
233 };
234 
235 #define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
236 #define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
237 /* get drive state: GET returns the cached state, POLL polls for new state */
238 
239 
240 /*
241  * reset FDC
242  */
243 enum reset_mode {
244 	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
245 	FD_RESET_IF_RAWCMD,	/* obsolete */
246 	FD_RESET_ALWAYS		/* reset always */
247 };
248 #define FDRESET _IO(2, 0x54)
249 
250 
251 /*
252  * FDC state
253  */
254 struct floppy_fdc_state {
255 	int spec1;		/* spec1 value last used */
256 	int spec2;		/* spec2 value last used */
257 	int dtr;
258 	unsigned char version;	/* FDC version code */
259 	unsigned char dor;
260 	unsigned long address;	/* io address */
261 	unsigned int rawcmd:2;
262 	unsigned int reset:1;
263 	unsigned int need_configure:1;
264 	unsigned int perp_mode:2;
265 	unsigned int has_fifo:1;
266 	unsigned int driver_version;	/* version code for floppy driver */
267 #define FD_DRIVER_VERSION 0x100
268 /* user programs using the floppy API should use floppy_fdc_state to
269  * get the version number of the floppy driver that they are running
270  * on. If this version number is bigger than the one compiled into the
271  * user program (the FD_DRIVER_VERSION define), it should be prepared
272  * to bigger structures
273  */
274 
275 	unsigned char track[4];
276 	/* Position of the heads of the 4 units attached to this FDC,
277 	 * as stored on the FDC. In the future, the position as stored
278 	 * on the FDC might not agree with the actual physical
279 	 * position of these drive heads. By allowing such
280 	 * disagreement, it will be possible to reset the FDC without
281 	 * incurring the expensive cost of repositioning all heads.
282 	 * Right now, these positions are hard wired to 0. */
283 
284 };
285 
286 #define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
287 
288 
289 /*
290  * Asynchronous Write error tracking
291  */
292 struct floppy_write_errors {
293 	/* Write error logging.
294 	 *
295 	 * These fields can be cleared with the FDWERRORCLR ioctl.
296 	 * Only writes that were attempted but failed due to a physical media
297 	 * error are logged.  write(2) calls that fail and return an error code
298 	 * to the user process are not counted.
299 	 */
300 
301 	unsigned int write_errors;  /* number of physical write errors
302 				     * encountered */
303 
304 	/* position of first and last write errors */
305 	unsigned long first_error_sector;
306 	int           first_error_generation;
307 	unsigned long last_error_sector;
308 	int           last_error_generation;
309 
310 	unsigned int badness; /* highest retry count for a read or write
311 			       * operation */
312 };
313 
314 #define FDWERRORCLR  _IO(2, 0x56)
315 /* clear write error and badness information */
316 #define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
317 /* get write error and badness information */
318 
319 
320 /*
321  * Raw commands
322  */
323 /* new interface flag: now we can do them in batches */
324 #define FDHAVEBATCHEDRAWCMD
325 
326 struct floppy_raw_cmd {
327 	unsigned int flags;
328 #define FD_RAW_READ 1
329 #define FD_RAW_WRITE 2
330 #define FD_RAW_NO_MOTOR 4
331 #define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
332 #define FD_RAW_INTR 8    /* wait for an interrupt */
333 #define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
334 #define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
335 				    * completion */
336 #define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
337 #define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
338 
339 /* more "in" flags */
340 #define FD_RAW_MORE 0x100  /* more records follow */
341 #define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
342 #define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
343 #define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
344 				  * detection too */
345 
346 /* more "out" flags */
347 #define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
348 #define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
349 
350 	void __user *data;
351 	char *kernel_data; /* location of data buffer in the kernel */
352 	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
353 				      * within the kernel */
354 	long length; /* in: length of dma transfer. out: remaining bytes */
355 	long phys_length; /* physical length, if different from dma length */
356 	int buffer_length; /* length of allocated buffer */
357 
358 	unsigned char rate;
359 	unsigned char cmd_count;
360 	unsigned char cmd[16];
361 	unsigned char reply_count;
362 	unsigned char reply[16];
363 	int track;
364 	int resultcode;
365 
366 	int reserved1;
367 	int reserved2;
368 };
369 
370 #define FDRAWCMD _IO(2, 0x58)
371 /* send a raw command to the fdc. Structure size not included, because of
372  * batches */
373 
374 #define FDTWADDLE _IO(2, 0x59)
375 /* flicker motor-on bit before reading a sector. Experimental */
376 
377 
378 #define FDEJECT _IO(2, 0x5a)
379 /* eject the disk */
380 
381 
382 
383 #endif /* _UAPI_LINUX_FD_H */
384