1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * HD-audio controller (Azalia) registers and helpers 4 * 5 * For traditional reasons, we still use azx_ prefix here 6 */ 7 8 #ifndef __SOUND_HDA_REGISTER_H 9 #define __SOUND_HDA_REGISTER_H 10 11 #include <linux/io.h> 12 #include <sound/hdaudio.h> 13 14 #define AZX_REG_GCAP 0x00 15 #define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ 16 #define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ 17 #define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ 18 #define AZX_GCAP_ISS (15 << 8) /* # of input streams */ 19 #define AZX_GCAP_OSS (15 << 12) /* # of output streams */ 20 #define AZX_REG_VMIN 0x02 21 #define AZX_REG_VMAJ 0x03 22 #define AZX_REG_OUTPAY 0x04 23 #define AZX_REG_INPAY 0x06 24 #define AZX_REG_GCTL 0x08 25 #define AZX_GCTL_RESET (1 << 0) /* controller reset */ 26 #define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ 27 #define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ 28 #define AZX_REG_WAKEEN 0x0c 29 #define AZX_REG_STATESTS 0x0e 30 #define AZX_REG_GSTS 0x10 31 #define AZX_GSTS_FSTS (1 << 1) /* flush status */ 32 #define AZX_REG_GCAP2 0x12 33 #define AZX_REG_LLCH 0x14 34 #define AZX_REG_OUTSTRMPAY 0x18 35 #define AZX_REG_INSTRMPAY 0x1A 36 #define AZX_REG_INTCTL 0x20 37 #define AZX_REG_INTSTS 0x24 38 #define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ 39 #define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ 40 #define AZX_REG_SSYNC 0x38 41 #define AZX_REG_CORBLBASE 0x40 42 #define AZX_REG_CORBUBASE 0x44 43 #define AZX_REG_CORBWP 0x48 44 #define AZX_REG_CORBRP 0x4a 45 #define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ 46 #define AZX_REG_CORBCTL 0x4c 47 #define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ 48 #define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ 49 #define AZX_REG_CORBSTS 0x4d 50 #define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ 51 #define AZX_REG_CORBSIZE 0x4e 52 53 #define AZX_REG_RIRBLBASE 0x50 54 #define AZX_REG_RIRBUBASE 0x54 55 #define AZX_REG_RIRBWP 0x58 56 #define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ 57 #define AZX_REG_RINTCNT 0x5a 58 #define AZX_REG_RIRBCTL 0x5c 59 #define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ 60 #define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ 61 #define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ 62 #define AZX_REG_RIRBSTS 0x5d 63 #define AZX_RBSTS_IRQ (1 << 0) /* response irq */ 64 #define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ 65 #define AZX_REG_RIRBSIZE 0x5e 66 67 #define AZX_REG_IC 0x60 68 #define AZX_REG_IR 0x64 69 #define AZX_REG_IRS 0x68 70 #define AZX_IRS_VALID (1<<1) 71 #define AZX_IRS_BUSY (1<<0) 72 73 #define AZX_REG_DPLBASE 0x70 74 #define AZX_REG_DPUBASE 0x74 75 #define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ 76 77 /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ 78 enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; 79 80 /* stream register offsets from stream base */ 81 #define AZX_REG_SD_CTL 0x00 82 #define AZX_REG_SD_CTL_3B 0x02 /* 3rd byte of SD_CTL register */ 83 #define AZX_REG_SD_STS 0x03 84 #define AZX_REG_SD_LPIB 0x04 85 #define AZX_REG_SD_CBL 0x08 86 #define AZX_REG_SD_LVI 0x0c 87 #define AZX_REG_SD_FIFOW 0x0e 88 #define AZX_REG_SD_FIFOSIZE 0x10 89 #define AZX_REG_SD_FORMAT 0x12 90 #define AZX_REG_SD_FIFOL 0x14 91 #define AZX_REG_SD_BDLPL 0x18 92 #define AZX_REG_SD_BDLPU 0x1c 93 94 /* GTS registers */ 95 #define AZX_REG_LLCH 0x14 96 97 #define AZX_REG_GTS_BASE 0x520 98 99 #define AZX_REG_GTSCC (AZX_REG_GTS_BASE + 0x00) 100 #define AZX_REG_WALFCC (AZX_REG_GTS_BASE + 0x04) 101 #define AZX_REG_TSCCL (AZX_REG_GTS_BASE + 0x08) 102 #define AZX_REG_TSCCU (AZX_REG_GTS_BASE + 0x0C) 103 #define AZX_REG_LLPFOC (AZX_REG_GTS_BASE + 0x14) 104 #define AZX_REG_LLPCL (AZX_REG_GTS_BASE + 0x18) 105 #define AZX_REG_LLPCU (AZX_REG_GTS_BASE + 0x1C) 106 107 /* Haswell/Broadwell display HD-A controller Extended Mode registers */ 108 #define AZX_REG_HSW_EM4 0x100c 109 #define AZX_REG_HSW_EM5 0x1010 110 111 /* Skylake/Broxton vendor-specific registers */ 112 #define AZX_REG_VS_EM1 0x1000 113 #define AZX_REG_VS_INRC 0x1004 114 #define AZX_REG_VS_OUTRC 0x1008 115 #define AZX_REG_VS_FIFOTRK 0x100C 116 #define AZX_REG_VS_FIFOTRK2 0x1010 117 #define AZX_REG_VS_EM2 0x1030 118 #define AZX_REG_VS_EM3L 0x1038 119 #define AZX_REG_VS_EM3U 0x103C 120 #define AZX_REG_VS_EM4L 0x1040 121 #define AZX_REG_VS_EM4U 0x1044 122 #define AZX_REG_VS_LTRP 0x1048 123 #define AZX_REG_VS_D0I3C 0x104A 124 #define AZX_REG_VS_PCE 0x104B 125 #define AZX_REG_VS_L2MAGC 0x1050 126 #define AZX_REG_VS_L2LAHPT 0x1054 127 #define AZX_REG_VS_SDXDPIB_XBASE 0x1084 128 #define AZX_REG_VS_SDXDPIB_XINTERVAL 0x20 129 #define AZX_REG_VS_SDXEFIFOS_XBASE 0x1094 130 #define AZX_REG_VS_SDXEFIFOS_XINTERVAL 0x20 131 132 /* PCI space */ 133 #define AZX_PCIREG_TCSEL 0x44 134 135 /* 136 * other constants 137 */ 138 139 /* max number of fragments - we may use more if allocating more pages for BDL */ 140 #define BDL_SIZE 4096 141 #define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) 142 #define AZX_MAX_FRAG 32 143 /* max buffer size - no h/w limit, you can increase as you like */ 144 #define AZX_MAX_BUF_SIZE (1024*1024*1024) 145 146 /* RIRB int mask: overrun[2], response[0] */ 147 #define RIRB_INT_RESPONSE 0x01 148 #define RIRB_INT_OVERRUN 0x04 149 #define RIRB_INT_MASK 0x05 150 151 /* STATESTS int mask: S3,SD2,SD1,SD0 */ 152 #define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) 153 154 /* SD_CTL bits */ 155 #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ 156 #define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ 157 #define SD_CTL_STRIPE (3 << 16) /* stripe control */ 158 #define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ 159 #define SD_CTL_DIR (1 << 19) /* bi-directional stream */ 160 #define SD_CTL_STREAM_TAG_MASK (0xf << 20) 161 #define SD_CTL_STREAM_TAG_SHIFT 20 162 163 /* SD_CTL and SD_STS */ 164 #define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ 165 #define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ 166 #define SD_INT_COMPLETE 0x04 /* completion interrupt */ 167 #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ 168 SD_INT_COMPLETE) 169 #define SD_CTL_STRIPE_MASK 0x3 /* stripe control mask */ 170 171 /* SD_STS */ 172 #define SD_STS_FIFO_READY 0x20 /* FIFO ready */ 173 174 /* INTCTL and INTSTS */ 175 #define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ 176 #define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ 177 #define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ 178 179 /* below are so far hardcoded - should read registers in future */ 180 #define AZX_MAX_CORB_ENTRIES 256 181 #define AZX_MAX_RIRB_ENTRIES 256 182 183 /* Capability header Structure */ 184 #define AZX_REG_CAP_HDR 0x0 185 #define AZX_CAP_HDR_VER_OFF 28 186 #define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF) 187 #define AZX_CAP_HDR_ID_OFF 16 188 #define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF) 189 #define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF 190 191 /* registers of Software Position Based FIFO Capability Structure */ 192 #define AZX_SPB_CAP_ID 0x4 193 #define AZX_REG_SPB_BASE_ADDR 0x700 194 #define AZX_REG_SPB_SPBFCH 0x00 195 #define AZX_REG_SPB_SPBFCCTL 0x04 196 /* Base used to calculate the iterating register offset */ 197 #define AZX_SPB_BASE 0x08 198 /* Interval used to calculate the iterating register offset */ 199 #define AZX_SPB_INTERVAL 0x08 200 /* SPIB base */ 201 #define AZX_SPB_SPIB 0x00 202 /* SPIB MAXFIFO base*/ 203 #define AZX_SPB_MAXFIFO 0x04 204 205 /* registers of Global Time Synchronization Capability Structure */ 206 #define AZX_GTS_CAP_ID 0x1 207 #define AZX_REG_GTS_GTSCH 0x00 208 #define AZX_REG_GTS_GTSCD 0x04 209 #define AZX_REG_GTS_GTSCTLAC 0x0C 210 #define AZX_GTS_BASE 0x20 211 #define AZX_GTS_INTERVAL 0x20 212 213 /* registers for Processing Pipe Capability Structure */ 214 #define AZX_PP_CAP_ID 0x3 215 #define AZX_REG_PP_PPCH 0x10 216 #define AZX_REG_PP_PPCTL 0x04 217 #define AZX_PPCTL_PIE (1<<31) 218 #define AZX_PPCTL_GPROCEN (1<<30) 219 /* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */ 220 #define AZX_PPCTL_PROCEN(_X_) (1<<(_X_)) 221 222 #define AZX_REG_PP_PPSTS 0x08 223 224 #define AZX_PPHC_BASE 0x10 225 #define AZX_PPHC_INTERVAL 0x10 226 227 #define AZX_REG_PPHCLLPL 0x0 228 #define AZX_REG_PPHCLLPU 0x4 229 #define AZX_REG_PPHCLDPL 0x8 230 #define AZX_REG_PPHCLDPU 0xC 231 232 #define AZX_PPLC_BASE 0x10 233 #define AZX_PPLC_MULTI 0x10 234 #define AZX_PPLC_INTERVAL 0x10 235 236 #define AZX_REG_PPLCCTL 0x0 237 #define AZX_PPLCCTL_STRM_BITS 4 238 #define AZX_PPLCCTL_STRM_SHIFT 20 239 #define AZX_REG_MASK(bit_num, offset) \ 240 (((1 << (bit_num)) - 1) << (offset)) 241 #define AZX_PPLCCTL_STRM_MASK \ 242 AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT) 243 #define AZX_PPLCCTL_RUN (1<<1) 244 #define AZX_PPLCCTL_STRST (1<<0) 245 246 #define AZX_REG_PPLCFMT 0x4 247 #define AZX_REG_PPLCLLPL 0x8 248 #define AZX_REG_PPLCLLPU 0xC 249 250 /* registers for Multiple Links Capability Structure */ 251 #define AZX_ML_CAP_ID 0x2 252 #define AZX_REG_ML_MLCH 0x00 253 #define AZX_REG_ML_MLCD 0x04 254 #define AZX_ML_BASE 0x40 255 #define AZX_ML_INTERVAL 0x40 256 257 #define AZX_REG_ML_LCAP 0x00 258 #define AZX_REG_ML_LCTL 0x04 259 #define AZX_REG_ML_LOSIDV 0x08 260 #define AZX_REG_ML_LSDIID 0x0C 261 #define AZX_REG_ML_LPSOO 0x10 262 #define AZX_REG_ML_LPSIO 0x12 263 #define AZX_REG_ML_LWALFC 0x18 264 #define AZX_REG_ML_LOUTPAY 0x20 265 #define AZX_REG_ML_LINPAY 0x30 266 267 /* bit0 is reserved, with BIT(1) mapping to stream1 */ 268 #define ML_LOSIDV_STREAM_MASK 0xFFFE 269 270 #define ML_LCTL_SCF_MASK 0xF 271 #define AZX_MLCTL_SPA (0x1 << 16) 272 #define AZX_MLCTL_CPA (0x1 << 23) 273 #define AZX_MLCTL_SPA_SHIFT 16 274 #define AZX_MLCTL_CPA_SHIFT 23 275 276 /* registers for DMA Resume Capability Structure */ 277 #define AZX_DRSM_CAP_ID 0x5 278 #define AZX_REG_DRSM_CTL 0x4 279 /* Base used to calculate the iterating register offset */ 280 #define AZX_DRSM_BASE 0x08 281 /* Interval used to calculate the iterating register offset */ 282 #define AZX_DRSM_INTERVAL 0x08 283 284 /* Global time synchronization registers */ 285 #define GTSCC_TSCCD_MASK 0x80000000 286 #define GTSCC_TSCCD_SHIFT BIT(31) 287 #define GTSCC_TSCCI_MASK 0x20 288 #define GTSCC_CDMAS_DMA_DIR_SHIFT 4 289 290 #define WALFCC_CIF_MASK 0x1FF 291 #define WALFCC_FN_SHIFT 9 292 #define HDA_CLK_CYCLES_PER_FRAME 512 293 294 /* 295 * An error occurs near frame "rollover". The clocks in frame value indicates 296 * whether this error may have occurred. Here we use the value of 10. Please 297 * see the errata for the right number [<10] 298 */ 299 #define HDA_MAX_CYCLE_VALUE 499 300 #define HDA_MAX_CYCLE_OFFSET 10 301 #define HDA_MAX_CYCLE_READ_RETRY 10 302 303 #define TSCCU_CCU_SHIFT 32 304 #define LLPC_CCU_SHIFT 32 305 306 307 /* 308 * helpers to read the stream position 309 */ 310 static inline unsigned int 311 snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) 312 { 313 return snd_hdac_stream_readl(stream, SD_LPIB); 314 } 315 316 static inline unsigned int 317 snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) 318 { 319 return le32_to_cpu(*stream->posbuf); 320 } 321 322 #endif /* __SOUND_HDA_REGISTER_H */ 323