1 /* Copyright 2008 - 2016 Freescale Semiconductor, Inc. 2 * 3 * Redistribution and use in source and binary forms, with or without 4 * modification, are permitted provided that the following conditions are met: 5 * * Redistributions of source code must retain the above copyright 6 * notice, this list of conditions and the following disclaimer. 7 * * Redistributions in binary form must reproduce the above copyright 8 * notice, this list of conditions and the following disclaimer in the 9 * documentation and/or other materials provided with the distribution. 10 * * Neither the name of Freescale Semiconductor nor the 11 * names of its contributors may be used to endorse or promote products 12 * derived from this software without specific prior written permission. 13 * 14 * ALTERNATIVELY, this software may be distributed under the terms of the 15 * GNU General Public License ("GPL") as published by the Free Software 16 * Foundation, either version 2 of that License or (at your option) any 17 * later version. 18 * 19 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 20 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 21 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 22 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 23 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 24 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 25 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 26 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 28 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #ifndef __FSL_QMAN_H 32 #define __FSL_QMAN_H 33 34 #include <linux/bitops.h> 35 36 /* Hardware constants */ 37 #define QM_CHANNEL_SWPORTAL0 0 38 #define QMAN_CHANNEL_POOL1 0x21 39 #define QMAN_CHANNEL_CAAM 0x80 40 #define QMAN_CHANNEL_POOL1_REV3 0x401 41 #define QMAN_CHANNEL_CAAM_REV3 0x840 42 extern u16 qm_channel_pool1; 43 extern u16 qm_channel_caam; 44 45 /* Portal processing (interrupt) sources */ 46 #define QM_PIRQ_CSCI 0x00100000 /* Congestion State Change */ 47 #define QM_PIRQ_EQCI 0x00080000 /* Enqueue Command Committed */ 48 #define QM_PIRQ_EQRI 0x00040000 /* EQCR Ring (below threshold) */ 49 #define QM_PIRQ_DQRI 0x00020000 /* DQRR Ring (non-empty) */ 50 #define QM_PIRQ_MRI 0x00010000 /* MR Ring (non-empty) */ 51 /* 52 * This mask contains all the interrupt sources that need handling except DQRI, 53 * ie. that if present should trigger slow-path processing. 54 */ 55 #define QM_PIRQ_SLOW (QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \ 56 QM_PIRQ_MRI) 57 58 /* For qman_static_dequeue_*** APIs */ 59 #define QM_SDQCR_CHANNELS_POOL_MASK 0x00007fff 60 /* for n in [1,15] */ 61 #define QM_SDQCR_CHANNELS_POOL(n) (0x00008000 >> (n)) 62 /* for conversion from n of qm_channel */ 63 static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel) 64 { 65 return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1); 66 } 67 68 /* --- QMan data structures (and associated constants) --- */ 69 70 /* "Frame Descriptor (FD)" */ 71 struct qm_fd { 72 union { 73 struct { 74 u8 cfg8b_w1; 75 u8 bpid; /* Buffer Pool ID */ 76 u8 cfg8b_w3; 77 u8 addr_hi; /* high 8-bits of 40-bit address */ 78 __be32 addr_lo; /* low 32-bits of 40-bit address */ 79 } __packed; 80 __be64 data; 81 }; 82 __be32 cfg; /* format, offset, length / congestion */ 83 union { 84 __be32 cmd; 85 __be32 status; 86 }; 87 } __aligned(8); 88 89 #define QM_FD_FORMAT_SG BIT(31) 90 #define QM_FD_FORMAT_LONG BIT(30) 91 #define QM_FD_FORMAT_COMPOUND BIT(29) 92 #define QM_FD_FORMAT_MASK GENMASK(31, 29) 93 #define QM_FD_OFF_SHIFT 20 94 #define QM_FD_OFF_MASK GENMASK(28, 20) 95 #define QM_FD_LEN_MASK GENMASK(19, 0) 96 #define QM_FD_LEN_BIG_MASK GENMASK(28, 0) 97 98 enum qm_fd_format { 99 /* 100 * 'contig' implies a contiguous buffer, whereas 'sg' implies a 101 * scatter-gather table. 'big' implies a 29-bit length with no offset 102 * field, otherwise length is 20-bit and offset is 9-bit. 'compound' 103 * implies a s/g-like table, where each entry itself represents a frame 104 * (contiguous or scatter-gather) and the 29-bit "length" is 105 * interpreted purely for congestion calculations, ie. a "congestion 106 * weight". 107 */ 108 qm_fd_contig = 0, 109 qm_fd_contig_big = QM_FD_FORMAT_LONG, 110 qm_fd_sg = QM_FD_FORMAT_SG, 111 qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG, 112 qm_fd_compound = QM_FD_FORMAT_COMPOUND 113 }; 114 115 static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd) 116 { 117 return be64_to_cpu(fd->data) & 0xffffffffffLLU; 118 } 119 120 static inline u64 qm_fd_addr_get64(const struct qm_fd *fd) 121 { 122 return be64_to_cpu(fd->data) & 0xffffffffffLLU; 123 } 124 125 static inline void qm_fd_addr_set64(struct qm_fd *fd, u64 addr) 126 { 127 fd->addr_hi = upper_32_bits(addr); 128 fd->addr_lo = cpu_to_be32(lower_32_bits(addr)); 129 } 130 131 /* 132 * The 'format' field indicates the interpretation of the remaining 133 * 29 bits of the 32-bit word. 134 * If 'format' is _contig or _sg, 20b length and 9b offset. 135 * If 'format' is _contig_big or _sg_big, 29b length. 136 * If 'format' is _compound, 29b "congestion weight". 137 */ 138 static inline enum qm_fd_format qm_fd_get_format(const struct qm_fd *fd) 139 { 140 return be32_to_cpu(fd->cfg) & QM_FD_FORMAT_MASK; 141 } 142 143 static inline int qm_fd_get_offset(const struct qm_fd *fd) 144 { 145 return (be32_to_cpu(fd->cfg) & QM_FD_OFF_MASK) >> QM_FD_OFF_SHIFT; 146 } 147 148 static inline int qm_fd_get_length(const struct qm_fd *fd) 149 { 150 return be32_to_cpu(fd->cfg) & QM_FD_LEN_MASK; 151 } 152 153 static inline int qm_fd_get_len_big(const struct qm_fd *fd) 154 { 155 return be32_to_cpu(fd->cfg) & QM_FD_LEN_BIG_MASK; 156 } 157 158 static inline void qm_fd_set_param(struct qm_fd *fd, enum qm_fd_format fmt, 159 int off, int len) 160 { 161 fd->cfg = cpu_to_be32(fmt | (len & QM_FD_LEN_BIG_MASK) | 162 ((off << QM_FD_OFF_SHIFT) & QM_FD_OFF_MASK)); 163 } 164 165 #define qm_fd_set_contig(fd, off, len) \ 166 qm_fd_set_param(fd, qm_fd_contig, off, len) 167 #define qm_fd_set_sg(fd, off, len) qm_fd_set_param(fd, qm_fd_sg, off, len) 168 #define qm_fd_set_contig_big(fd, len) \ 169 qm_fd_set_param(fd, qm_fd_contig_big, 0, len) 170 #define qm_fd_set_sg_big(fd, len) qm_fd_set_param(fd, qm_fd_sg_big, 0, len) 171 #define qm_fd_set_compound(fd, len) qm_fd_set_param(fd, qm_fd_compound, 0, len) 172 173 static inline void qm_fd_clear_fd(struct qm_fd *fd) 174 { 175 fd->data = 0; 176 fd->cfg = 0; 177 fd->cmd = 0; 178 } 179 180 /* Scatter/Gather table entry */ 181 struct qm_sg_entry { 182 union { 183 struct { 184 u8 __reserved1[3]; 185 u8 addr_hi; /* high 8-bits of 40-bit address */ 186 __be32 addr_lo; /* low 32-bits of 40-bit address */ 187 }; 188 __be64 data; 189 }; 190 __be32 cfg; /* E bit, F bit, length */ 191 u8 __reserved2; 192 u8 bpid; 193 __be16 offset; /* 13-bit, _res[13-15]*/ 194 } __packed; 195 196 #define QM_SG_LEN_MASK GENMASK(29, 0) 197 #define QM_SG_OFF_MASK GENMASK(12, 0) 198 #define QM_SG_FIN BIT(30) 199 #define QM_SG_EXT BIT(31) 200 201 static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg) 202 { 203 return be64_to_cpu(sg->data) & 0xffffffffffLLU; 204 } 205 206 static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg) 207 { 208 return be64_to_cpu(sg->data) & 0xffffffffffLLU; 209 } 210 211 static inline void qm_sg_entry_set64(struct qm_sg_entry *sg, u64 addr) 212 { 213 sg->addr_hi = upper_32_bits(addr); 214 sg->addr_lo = cpu_to_be32(lower_32_bits(addr)); 215 } 216 217 static inline bool qm_sg_entry_is_final(const struct qm_sg_entry *sg) 218 { 219 return be32_to_cpu(sg->cfg) & QM_SG_FIN; 220 } 221 222 static inline bool qm_sg_entry_is_ext(const struct qm_sg_entry *sg) 223 { 224 return be32_to_cpu(sg->cfg) & QM_SG_EXT; 225 } 226 227 static inline int qm_sg_entry_get_len(const struct qm_sg_entry *sg) 228 { 229 return be32_to_cpu(sg->cfg) & QM_SG_LEN_MASK; 230 } 231 232 static inline void qm_sg_entry_set_len(struct qm_sg_entry *sg, int len) 233 { 234 sg->cfg = cpu_to_be32(len & QM_SG_LEN_MASK); 235 } 236 237 static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len) 238 { 239 sg->cfg = cpu_to_be32(QM_SG_FIN | (len & QM_SG_LEN_MASK)); 240 } 241 242 static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg) 243 { 244 return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK; 245 } 246 247 /* "Frame Dequeue Response" */ 248 struct qm_dqrr_entry { 249 u8 verb; 250 u8 stat; 251 __be16 seqnum; /* 15-bit */ 252 u8 tok; 253 u8 __reserved2[3]; 254 __be32 fqid; /* 24-bit */ 255 __be32 context_b; 256 struct qm_fd fd; 257 u8 __reserved4[32]; 258 } __packed; 259 #define QM_DQRR_VERB_VBIT 0x80 260 #define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */ 261 #define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */ 262 #define QM_DQRR_STAT_FQ_EMPTY 0x80 /* FQ empty */ 263 #define QM_DQRR_STAT_FQ_HELDACTIVE 0x40 /* FQ held active */ 264 #define QM_DQRR_STAT_FQ_FORCEELIGIBLE 0x20 /* FQ was force-eligible'd */ 265 #define QM_DQRR_STAT_FD_VALID 0x10 /* has a non-NULL FD */ 266 #define QM_DQRR_STAT_UNSCHEDULED 0x02 /* Unscheduled dequeue */ 267 #define QM_DQRR_STAT_DQCR_EXPIRED 0x01 /* VDQCR or PDQCR expired*/ 268 269 /* 'fqid' is a 24-bit field in every h/w descriptor */ 270 #define QM_FQID_MASK GENMASK(23, 0) 271 #define qm_fqid_set(p, v) ((p)->fqid = cpu_to_be32((v) & QM_FQID_MASK)) 272 #define qm_fqid_get(p) (be32_to_cpu((p)->fqid) & QM_FQID_MASK) 273 274 /* "ERN Message Response" */ 275 /* "FQ State Change Notification" */ 276 union qm_mr_entry { 277 struct { 278 u8 verb; 279 u8 __reserved[63]; 280 }; 281 struct { 282 u8 verb; 283 u8 dca; 284 __be16 seqnum; 285 u8 rc; /* Rej Code: 8-bit */ 286 u8 __reserved[3]; 287 __be32 fqid; /* 24-bit */ 288 __be32 tag; 289 struct qm_fd fd; 290 u8 __reserved1[32]; 291 } __packed ern; 292 struct { 293 u8 verb; 294 u8 fqs; /* Frame Queue Status */ 295 u8 __reserved1[6]; 296 __be32 fqid; /* 24-bit */ 297 __be32 context_b; 298 u8 __reserved2[48]; 299 } __packed fq; /* FQRN/FQRNI/FQRL/FQPN */ 300 }; 301 #define QM_MR_VERB_VBIT 0x80 302 /* 303 * ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb 304 * which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished 305 * from the other MR types by noting if the 0x20 bit is unset. 306 */ 307 #define QM_MR_VERB_TYPE_MASK 0x27 308 #define QM_MR_VERB_DC_ERN 0x20 309 #define QM_MR_VERB_FQRN 0x21 310 #define QM_MR_VERB_FQRNI 0x22 311 #define QM_MR_VERB_FQRL 0x23 312 #define QM_MR_VERB_FQPN 0x24 313 #define QM_MR_RC_MASK 0xf0 /* contains one of; */ 314 #define QM_MR_RC_CGR_TAILDROP 0x00 315 #define QM_MR_RC_WRED 0x10 316 #define QM_MR_RC_ERROR 0x20 317 #define QM_MR_RC_ORPWINDOW_EARLY 0x30 318 #define QM_MR_RC_ORPWINDOW_LATE 0x40 319 #define QM_MR_RC_FQ_TAILDROP 0x50 320 #define QM_MR_RC_ORPWINDOW_RETIRED 0x60 321 #define QM_MR_RC_ORP_ZERO 0x70 322 #define QM_MR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */ 323 #define QM_MR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */ 324 325 /* 326 * An identical structure of FQD fields is present in the "Init FQ" command and 327 * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type. 328 * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the 329 * latter has two inlines to assist with converting to/from the mant+exp 330 * representation. 331 */ 332 struct qm_fqd_stashing { 333 /* See QM_STASHING_EXCL_<...> */ 334 u8 exclusive; 335 /* Numbers of cachelines */ 336 u8 cl; /* _res[6-7], as[4-5], ds[2-3], cs[0-1] */ 337 }; 338 339 struct qm_fqd_oac { 340 /* "Overhead Accounting Control", see QM_OAC_<...> */ 341 u8 oac; /* oac[6-7], _res[0-5] */ 342 /* Two's-complement value (-128 to +127) */ 343 s8 oal; /* "Overhead Accounting Length" */ 344 }; 345 346 struct qm_fqd { 347 /* _res[6-7], orprws[3-5], oa[2], olws[0-1] */ 348 u8 orpc; 349 u8 cgid; 350 __be16 fq_ctrl; /* See QM_FQCTRL_<...> */ 351 __be16 dest_wq; /* channel[3-15], wq[0-2] */ 352 __be16 ics_cred; /* 15-bit */ 353 /* 354 * For "Initialize Frame Queue" commands, the write-enable mask 355 * determines whether 'td' or 'oac_init' is observed. For query 356 * commands, this field is always 'td', and 'oac_query' (below) reflects 357 * the Overhead ACcounting values. 358 */ 359 union { 360 __be16 td; /* "Taildrop": _res[13-15], mant[5-12], exp[0-4] */ 361 struct qm_fqd_oac oac_init; 362 }; 363 __be32 context_b; 364 union { 365 /* Treat it as 64-bit opaque */ 366 __be64 opaque; 367 struct { 368 __be32 hi; 369 __be32 lo; 370 }; 371 /* Treat it as s/w portal stashing config */ 372 /* see "FQD Context_A field used for [...]" */ 373 struct { 374 struct qm_fqd_stashing stashing; 375 /* 376 * 48-bit address of FQ context to 377 * stash, must be cacheline-aligned 378 */ 379 __be16 context_hi; 380 __be32 context_lo; 381 } __packed; 382 } context_a; 383 struct qm_fqd_oac oac_query; 384 } __packed; 385 386 #define QM_FQD_CHAN_OFF 3 387 #define QM_FQD_WQ_MASK GENMASK(2, 0) 388 #define QM_FQD_TD_EXP_MASK GENMASK(4, 0) 389 #define QM_FQD_TD_MANT_OFF 5 390 #define QM_FQD_TD_MANT_MASK GENMASK(12, 5) 391 #define QM_FQD_TD_MAX 0xe0000000 392 #define QM_FQD_TD_MANT_MAX 0xff 393 #define QM_FQD_OAC_OFF 6 394 #define QM_FQD_AS_OFF 4 395 #define QM_FQD_DS_OFF 2 396 #define QM_FQD_XS_MASK 0x3 397 398 /* 64-bit converters for context_hi/lo */ 399 static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd) 400 { 401 return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; 402 } 403 404 static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd) 405 { 406 return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; 407 } 408 409 static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd) 410 { 411 return qm_fqd_stashing_get64(fqd); 412 } 413 414 static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr) 415 { 416 fqd->context_a.context_hi = cpu_to_be16(upper_32_bits(addr)); 417 fqd->context_a.context_lo = cpu_to_be32(lower_32_bits(addr)); 418 } 419 420 static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr) 421 { 422 fqd->context_a.hi = cpu_to_be32(upper_32_bits(addr)); 423 fqd->context_a.lo = cpu_to_be32(lower_32_bits(addr)); 424 } 425 426 /* convert a threshold value into mant+exp representation */ 427 static inline int qm_fqd_set_taildrop(struct qm_fqd *fqd, u32 val, 428 int roundup) 429 { 430 u32 e = 0; 431 int td, oddbit = 0; 432 433 if (val > QM_FQD_TD_MAX) 434 return -ERANGE; 435 436 while (val > QM_FQD_TD_MANT_MAX) { 437 oddbit = val & 1; 438 val >>= 1; 439 e++; 440 if (roundup && oddbit) 441 val++; 442 } 443 444 td = (val << QM_FQD_TD_MANT_OFF) & QM_FQD_TD_MANT_MASK; 445 td |= (e & QM_FQD_TD_EXP_MASK); 446 fqd->td = cpu_to_be16(td); 447 return 0; 448 } 449 /* and the other direction */ 450 static inline int qm_fqd_get_taildrop(const struct qm_fqd *fqd) 451 { 452 int td = be16_to_cpu(fqd->td); 453 454 return ((td & QM_FQD_TD_MANT_MASK) >> QM_FQD_TD_MANT_OFF) 455 << (td & QM_FQD_TD_EXP_MASK); 456 } 457 458 static inline void qm_fqd_set_stashing(struct qm_fqd *fqd, u8 as, u8 ds, u8 cs) 459 { 460 struct qm_fqd_stashing *st = &fqd->context_a.stashing; 461 462 st->cl = ((as & QM_FQD_XS_MASK) << QM_FQD_AS_OFF) | 463 ((ds & QM_FQD_XS_MASK) << QM_FQD_DS_OFF) | 464 (cs & QM_FQD_XS_MASK); 465 } 466 467 static inline u8 qm_fqd_get_stashing(const struct qm_fqd *fqd) 468 { 469 return fqd->context_a.stashing.cl; 470 } 471 472 static inline void qm_fqd_set_oac(struct qm_fqd *fqd, u8 val) 473 { 474 fqd->oac_init.oac = val << QM_FQD_OAC_OFF; 475 } 476 477 static inline void qm_fqd_set_oal(struct qm_fqd *fqd, s8 val) 478 { 479 fqd->oac_init.oal = val; 480 } 481 482 static inline void qm_fqd_set_destwq(struct qm_fqd *fqd, int ch, int wq) 483 { 484 fqd->dest_wq = cpu_to_be16((ch << QM_FQD_CHAN_OFF) | 485 (wq & QM_FQD_WQ_MASK)); 486 } 487 488 static inline int qm_fqd_get_chan(const struct qm_fqd *fqd) 489 { 490 return be16_to_cpu(fqd->dest_wq) >> QM_FQD_CHAN_OFF; 491 } 492 493 static inline int qm_fqd_get_wq(const struct qm_fqd *fqd) 494 { 495 return be16_to_cpu(fqd->dest_wq) & QM_FQD_WQ_MASK; 496 } 497 498 /* See "Frame Queue Descriptor (FQD)" */ 499 /* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */ 500 #define QM_FQCTRL_MASK 0x07ff /* 'fq_ctrl' flags; */ 501 #define QM_FQCTRL_CGE 0x0400 /* Congestion Group Enable */ 502 #define QM_FQCTRL_TDE 0x0200 /* Tail-Drop Enable */ 503 #define QM_FQCTRL_CTXASTASHING 0x0080 /* Context-A stashing */ 504 #define QM_FQCTRL_CPCSTASH 0x0040 /* CPC Stash Enable */ 505 #define QM_FQCTRL_FORCESFDR 0x0008 /* High-priority SFDRs */ 506 #define QM_FQCTRL_AVOIDBLOCK 0x0004 /* Don't block active */ 507 #define QM_FQCTRL_HOLDACTIVE 0x0002 /* Hold active in portal */ 508 #define QM_FQCTRL_PREFERINCACHE 0x0001 /* Aggressively cache FQD */ 509 #define QM_FQCTRL_LOCKINCACHE QM_FQCTRL_PREFERINCACHE /* older naming */ 510 511 /* See "FQD Context_A field used for [...] */ 512 /* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */ 513 #define QM_STASHING_EXCL_ANNOTATION 0x04 514 #define QM_STASHING_EXCL_DATA 0x02 515 #define QM_STASHING_EXCL_CTX 0x01 516 517 /* See "Intra Class Scheduling" */ 518 /* FQD field 'OAC' (Overhead ACcounting) uses these constants */ 519 #define QM_OAC_ICS 0x2 /* Accounting for Intra-Class Scheduling */ 520 #define QM_OAC_CG 0x1 /* Accounting for Congestion Groups */ 521 522 /* 523 * This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields 524 * and associated commands/responses. The WRED parameters are calculated from 525 * these fields as follows; 526 * MaxTH = MA * (2 ^ Mn) 527 * Slope = SA / (2 ^ Sn) 528 * MaxP = 4 * (Pn + 1) 529 */ 530 struct qm_cgr_wr_parm { 531 /* MA[24-31], Mn[19-23], SA[12-18], Sn[6-11], Pn[0-5] */ 532 __be32 word; 533 }; 534 /* 535 * This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding 536 * management commands, this is padded to a 16-bit structure field, so that's 537 * how we represent it here. The congestion state threshold is calculated from 538 * these fields as follows; 539 * CS threshold = TA * (2 ^ Tn) 540 */ 541 struct qm_cgr_cs_thres { 542 /* _res[13-15], TA[5-12], Tn[0-4] */ 543 __be16 word; 544 }; 545 /* 546 * This identical structure of CGR fields is present in the "Init/Modify CGR" 547 * commands and the "Query CGR" result. It's suctioned out here into its own 548 * struct. 549 */ 550 struct __qm_mc_cgr { 551 struct qm_cgr_wr_parm wr_parm_g; 552 struct qm_cgr_wr_parm wr_parm_y; 553 struct qm_cgr_wr_parm wr_parm_r; 554 u8 wr_en_g; /* boolean, use QM_CGR_EN */ 555 u8 wr_en_y; /* boolean, use QM_CGR_EN */ 556 u8 wr_en_r; /* boolean, use QM_CGR_EN */ 557 u8 cscn_en; /* boolean, use QM_CGR_EN */ 558 union { 559 struct { 560 __be16 cscn_targ_upd_ctrl; /* use QM_CGR_TARG_UDP_* */ 561 __be16 cscn_targ_dcp_low; 562 }; 563 __be32 cscn_targ; /* use QM_CGR_TARG_* */ 564 }; 565 u8 cstd_en; /* boolean, use QM_CGR_EN */ 566 u8 cs; /* boolean, only used in query response */ 567 struct qm_cgr_cs_thres cs_thres; /* use qm_cgr_cs_thres_set64() */ 568 u8 mode; /* QMAN_CGR_MODE_FRAME not supported in rev1.0 */ 569 } __packed; 570 #define QM_CGR_EN 0x01 /* For wr_en_*, cscn_en, cstd_en */ 571 #define QM_CGR_TARG_UDP_CTRL_WRITE_BIT 0x8000 /* value written to portal bit*/ 572 #define QM_CGR_TARG_UDP_CTRL_DCP 0x4000 /* 0: SWP, 1: DCP */ 573 #define QM_CGR_TARG_PORTAL(n) (0x80000000 >> (n)) /* s/w portal, 0-9 */ 574 #define QM_CGR_TARG_FMAN0 0x00200000 /* direct-connect portal: fman0 */ 575 #define QM_CGR_TARG_FMAN1 0x00100000 /* : fman1 */ 576 /* Convert CGR thresholds to/from "cs_thres" format */ 577 static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th) 578 { 579 int thres = be16_to_cpu(th->word); 580 581 return ((thres >> 5) & 0xff) << (thres & 0x1f); 582 } 583 584 static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val, 585 int roundup) 586 { 587 u32 e = 0; 588 int oddbit = 0; 589 590 while (val > 0xff) { 591 oddbit = val & 1; 592 val >>= 1; 593 e++; 594 if (roundup && oddbit) 595 val++; 596 } 597 th->word = cpu_to_be16(((val & 0xff) << 5) | (e & 0x1f)); 598 return 0; 599 } 600 601 /* "Initialize FQ" */ 602 struct qm_mcc_initfq { 603 u8 __reserved1[2]; 604 __be16 we_mask; /* Write Enable Mask */ 605 __be32 fqid; /* 24-bit */ 606 __be16 count; /* Initialises 'count+1' FQDs */ 607 struct qm_fqd fqd; /* the FQD fields go here */ 608 u8 __reserved2[30]; 609 } __packed; 610 /* "Initialize/Modify CGR" */ 611 struct qm_mcc_initcgr { 612 u8 __reserve1[2]; 613 __be16 we_mask; /* Write Enable Mask */ 614 struct __qm_mc_cgr cgr; /* CGR fields */ 615 u8 __reserved2[2]; 616 u8 cgid; 617 u8 __reserved3[32]; 618 } __packed; 619 620 /* INITFQ-specific flags */ 621 #define QM_INITFQ_WE_MASK 0x01ff /* 'Write Enable' flags; */ 622 #define QM_INITFQ_WE_OAC 0x0100 623 #define QM_INITFQ_WE_ORPC 0x0080 624 #define QM_INITFQ_WE_CGID 0x0040 625 #define QM_INITFQ_WE_FQCTRL 0x0020 626 #define QM_INITFQ_WE_DESTWQ 0x0010 627 #define QM_INITFQ_WE_ICSCRED 0x0008 628 #define QM_INITFQ_WE_TDTHRESH 0x0004 629 #define QM_INITFQ_WE_CONTEXTB 0x0002 630 #define QM_INITFQ_WE_CONTEXTA 0x0001 631 /* INITCGR/MODIFYCGR-specific flags */ 632 #define QM_CGR_WE_MASK 0x07ff /* 'Write Enable Mask'; */ 633 #define QM_CGR_WE_WR_PARM_G 0x0400 634 #define QM_CGR_WE_WR_PARM_Y 0x0200 635 #define QM_CGR_WE_WR_PARM_R 0x0100 636 #define QM_CGR_WE_WR_EN_G 0x0080 637 #define QM_CGR_WE_WR_EN_Y 0x0040 638 #define QM_CGR_WE_WR_EN_R 0x0020 639 #define QM_CGR_WE_CSCN_EN 0x0010 640 #define QM_CGR_WE_CSCN_TARG 0x0008 641 #define QM_CGR_WE_CSTD_EN 0x0004 642 #define QM_CGR_WE_CS_THRES 0x0002 643 #define QM_CGR_WE_MODE 0x0001 644 645 #define QMAN_CGR_FLAG_USE_INIT 0x00000001 646 #define QMAN_CGR_MODE_FRAME 0x00000001 647 648 /* Portal and Frame Queues */ 649 /* Represents a managed portal */ 650 struct qman_portal; 651 652 /* 653 * This object type represents QMan frame queue descriptors (FQD), it is 654 * cacheline-aligned, and initialised by qman_create_fq(). The structure is 655 * defined further down. 656 */ 657 struct qman_fq; 658 659 /* 660 * This object type represents a QMan congestion group, it is defined further 661 * down. 662 */ 663 struct qman_cgr; 664 665 /* 666 * This enum, and the callback type that returns it, are used when handling 667 * dequeued frames via DQRR. Note that for "null" callbacks registered with the 668 * portal object (for handling dequeues that do not demux because context_b is 669 * NULL), the return value *MUST* be qman_cb_dqrr_consume. 670 */ 671 enum qman_cb_dqrr_result { 672 /* DQRR entry can be consumed */ 673 qman_cb_dqrr_consume, 674 /* Like _consume, but requests parking - FQ must be held-active */ 675 qman_cb_dqrr_park, 676 /* Does not consume, for DCA mode only. */ 677 qman_cb_dqrr_defer, 678 /* 679 * Stop processing without consuming this ring entry. Exits the current 680 * qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within 681 * an interrupt handler, the callback would typically call 682 * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value, 683 * otherwise the interrupt will reassert immediately. 684 */ 685 qman_cb_dqrr_stop, 686 /* Like qman_cb_dqrr_stop, but consumes the current entry. */ 687 qman_cb_dqrr_consume_stop 688 }; 689 typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm, 690 struct qman_fq *fq, 691 const struct qm_dqrr_entry *dqrr); 692 693 /* 694 * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They 695 * are always consumed after the callback returns. 696 */ 697 typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq, 698 const union qm_mr_entry *msg); 699 700 /* 701 * s/w-visible states. Ie. tentatively scheduled + truly scheduled + active + 702 * held-active + held-suspended are just "sched". Things like "retired" will not 703 * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until 704 * then, to indicate it's completing and to gate attempts to retry the retire 705 * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's 706 * technically impossible in the case of enqueue DCAs (which refer to DQRR ring 707 * index rather than the FQ that ring entry corresponds to), so repeated park 708 * commands are allowed (if you're silly enough to try) but won't change FQ 709 * state, and the resulting park notifications move FQs from "sched" to 710 * "parked". 711 */ 712 enum qman_fq_state { 713 qman_fq_state_oos, 714 qman_fq_state_parked, 715 qman_fq_state_sched, 716 qman_fq_state_retired 717 }; 718 719 #define QMAN_FQ_STATE_CHANGING 0x80000000 /* 'state' is changing */ 720 #define QMAN_FQ_STATE_NE 0x40000000 /* retired FQ isn't empty */ 721 #define QMAN_FQ_STATE_ORL 0x20000000 /* retired FQ has ORL */ 722 #define QMAN_FQ_STATE_BLOCKOOS 0xe0000000 /* if any are set, no OOS */ 723 #define QMAN_FQ_STATE_CGR_EN 0x10000000 /* CGR enabled */ 724 #define QMAN_FQ_STATE_VDQCR 0x08000000 /* being volatile dequeued */ 725 726 /* 727 * Frame queue objects (struct qman_fq) are stored within memory passed to 728 * qman_create_fq(), as this allows stashing of caller-provided demux callback 729 * pointers at no extra cost to stashing of (driver-internal) FQ state. If the 730 * caller wishes to add per-FQ state and have it benefit from dequeue-stashing, 731 * they should; 732 * 733 * (a) extend the qman_fq structure with their state; eg. 734 * 735 * // myfq is allocated and driver_fq callbacks filled in; 736 * struct my_fq { 737 * struct qman_fq base; 738 * int an_extra_field; 739 * [ ... add other fields to be associated with each FQ ...] 740 * } *myfq = some_my_fq_allocator(); 741 * struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base); 742 * 743 * // in a dequeue callback, access extra fields from 'fq' via a cast; 744 * struct my_fq *myfq = (struct my_fq *)fq; 745 * do_something_with(myfq->an_extra_field); 746 * [...] 747 * 748 * (b) when and if configuring the FQ for context stashing, specify how ever 749 * many cachelines are required to stash 'struct my_fq', to accelerate not 750 * only the QMan driver but the callback as well. 751 */ 752 753 struct qman_fq_cb { 754 qman_cb_dqrr dqrr; /* for dequeued frames */ 755 qman_cb_mr ern; /* for s/w ERNs */ 756 qman_cb_mr fqs; /* frame-queue state changes*/ 757 }; 758 759 struct qman_fq { 760 /* Caller of qman_create_fq() provides these demux callbacks */ 761 struct qman_fq_cb cb; 762 /* 763 * These are internal to the driver, don't touch. In particular, they 764 * may change, be removed, or extended (so you shouldn't rely on 765 * sizeof(qman_fq) being a constant). 766 */ 767 u32 fqid, idx; 768 unsigned long flags; 769 enum qman_fq_state state; 770 int cgr_groupid; 771 }; 772 773 /* 774 * This callback type is used when handling congestion group entry/exit. 775 * 'congested' is non-zero on congestion-entry, and zero on congestion-exit. 776 */ 777 typedef void (*qman_cb_cgr)(struct qman_portal *qm, 778 struct qman_cgr *cgr, int congested); 779 780 struct qman_cgr { 781 /* Set these prior to qman_create_cgr() */ 782 u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/ 783 qman_cb_cgr cb; 784 /* These are private to the driver */ 785 u16 chan; /* portal channel this object is created on */ 786 struct list_head node; 787 }; 788 789 /* Flags to qman_create_fq() */ 790 #define QMAN_FQ_FLAG_NO_ENQUEUE 0x00000001 /* can't enqueue */ 791 #define QMAN_FQ_FLAG_NO_MODIFY 0x00000002 /* can only enqueue */ 792 #define QMAN_FQ_FLAG_TO_DCPORTAL 0x00000004 /* consumed by CAAM/PME/Fman */ 793 #define QMAN_FQ_FLAG_DYNAMIC_FQID 0x00000020 /* (de)allocate fqid */ 794 795 /* Flags to qman_init_fq() */ 796 #define QMAN_INITFQ_FLAG_SCHED 0x00000001 /* schedule rather than park */ 797 #define QMAN_INITFQ_FLAG_LOCAL 0x00000004 /* set dest portal */ 798 799 /* 800 * For qman_volatile_dequeue(); Choose one PRECEDENCE. EXACT is optional. Use 801 * NUMFRAMES(n) (6-bit) or NUMFRAMES_TILLEMPTY to fill in the frame-count. Use 802 * FQID(n) to fill in the frame queue ID. 803 */ 804 #define QM_VDQCR_PRECEDENCE_VDQCR 0x0 805 #define QM_VDQCR_PRECEDENCE_SDQCR 0x80000000 806 #define QM_VDQCR_EXACT 0x40000000 807 #define QM_VDQCR_NUMFRAMES_MASK 0x3f000000 808 #define QM_VDQCR_NUMFRAMES_SET(n) (((n) & 0x3f) << 24) 809 #define QM_VDQCR_NUMFRAMES_GET(n) (((n) >> 24) & 0x3f) 810 #define QM_VDQCR_NUMFRAMES_TILLEMPTY QM_VDQCR_NUMFRAMES_SET(0) 811 812 #define QMAN_VOLATILE_FLAG_WAIT 0x00000001 /* wait if VDQCR is in use */ 813 #define QMAN_VOLATILE_FLAG_WAIT_INT 0x00000002 /* if wait, interruptible? */ 814 #define QMAN_VOLATILE_FLAG_FINISH 0x00000004 /* wait till VDQCR completes */ 815 816 /* "Query FQ Non-Programmable Fields" */ 817 struct qm_mcr_queryfq_np { 818 u8 verb; 819 u8 result; 820 u8 __reserved1; 821 u8 state; /* QM_MCR_NP_STATE_*** */ 822 u32 fqd_link; /* 24-bit, _res2[24-31] */ 823 u16 odp_seq; /* 14-bit, _res3[14-15] */ 824 u16 orp_nesn; /* 14-bit, _res4[14-15] */ 825 u16 orp_ea_hseq; /* 15-bit, _res5[15] */ 826 u16 orp_ea_tseq; /* 15-bit, _res6[15] */ 827 u32 orp_ea_hptr; /* 24-bit, _res7[24-31] */ 828 u32 orp_ea_tptr; /* 24-bit, _res8[24-31] */ 829 u32 pfdr_hptr; /* 24-bit, _res9[24-31] */ 830 u32 pfdr_tptr; /* 24-bit, _res10[24-31] */ 831 u8 __reserved2[5]; 832 u8 is; /* 1-bit, _res12[1-7] */ 833 u16 ics_surp; 834 u32 byte_cnt; 835 u32 frm_cnt; /* 24-bit, _res13[24-31] */ 836 u32 __reserved3; 837 u16 ra1_sfdr; /* QM_MCR_NP_RA1_*** */ 838 u16 ra2_sfdr; /* QM_MCR_NP_RA2_*** */ 839 u16 __reserved4; 840 u16 od1_sfdr; /* QM_MCR_NP_OD1_*** */ 841 u16 od2_sfdr; /* QM_MCR_NP_OD2_*** */ 842 u16 od3_sfdr; /* QM_MCR_NP_OD3_*** */ 843 } __packed; 844 845 #define QM_MCR_NP_STATE_FE 0x10 846 #define QM_MCR_NP_STATE_R 0x08 847 #define QM_MCR_NP_STATE_MASK 0x07 /* Reads FQD::STATE; */ 848 #define QM_MCR_NP_STATE_OOS 0x00 849 #define QM_MCR_NP_STATE_RETIRED 0x01 850 #define QM_MCR_NP_STATE_TEN_SCHED 0x02 851 #define QM_MCR_NP_STATE_TRU_SCHED 0x03 852 #define QM_MCR_NP_STATE_PARKED 0x04 853 #define QM_MCR_NP_STATE_ACTIVE 0x05 854 #define QM_MCR_NP_PTR_MASK 0x07ff /* for RA[12] & OD[123] */ 855 #define QM_MCR_NP_RA1_NRA(v) (((v) >> 14) & 0x3) /* FQD::NRA */ 856 #define QM_MCR_NP_RA2_IT(v) (((v) >> 14) & 0x1) /* FQD::IT */ 857 #define QM_MCR_NP_OD1_NOD(v) (((v) >> 14) & 0x3) /* FQD::NOD */ 858 #define QM_MCR_NP_OD3_NPC(v) (((v) >> 14) & 0x3) /* FQD::NPC */ 859 860 enum qm_mcr_queryfq_np_masks { 861 qm_mcr_fqd_link_mask = BIT(24) - 1, 862 qm_mcr_odp_seq_mask = BIT(14) - 1, 863 qm_mcr_orp_nesn_mask = BIT(14) - 1, 864 qm_mcr_orp_ea_hseq_mask = BIT(15) - 1, 865 qm_mcr_orp_ea_tseq_mask = BIT(15) - 1, 866 qm_mcr_orp_ea_hptr_mask = BIT(24) - 1, 867 qm_mcr_orp_ea_tptr_mask = BIT(24) - 1, 868 qm_mcr_pfdr_hptr_mask = BIT(24) - 1, 869 qm_mcr_pfdr_tptr_mask = BIT(24) - 1, 870 qm_mcr_is_mask = BIT(1) - 1, 871 qm_mcr_frm_cnt_mask = BIT(24) - 1, 872 }; 873 874 #define qm_mcr_np_get(np, field) \ 875 ((np)->field & (qm_mcr_##field##_mask)) 876 877 /* Portal Management */ 878 /** 879 * qman_p_irqsource_add - add processing sources to be interrupt-driven 880 * @bits: bitmask of QM_PIRQ_**I processing sources 881 * 882 * Adds processing sources that should be interrupt-driven (rather than 883 * processed via qman_poll_***() functions). 884 */ 885 void qman_p_irqsource_add(struct qman_portal *p, u32 bits); 886 887 /** 888 * qman_p_irqsource_remove - remove processing sources from being int-driven 889 * @bits: bitmask of QM_PIRQ_**I processing sources 890 * 891 * Removes processing sources from being interrupt-driven, so that they will 892 * instead be processed via qman_poll_***() functions. 893 */ 894 void qman_p_irqsource_remove(struct qman_portal *p, u32 bits); 895 896 /** 897 * qman_affine_cpus - return a mask of cpus that have affine portals 898 */ 899 const cpumask_t *qman_affine_cpus(void); 900 901 /** 902 * qman_affine_channel - return the channel ID of an portal 903 * @cpu: the cpu whose affine portal is the subject of the query 904 * 905 * If @cpu is -1, the affine portal for the current CPU will be used. It is a 906 * bug to call this function for any value of @cpu (other than -1) that is not a 907 * member of the mask returned from qman_affine_cpus(). 908 */ 909 u16 qman_affine_channel(int cpu); 910 911 /** 912 * qman_get_affine_portal - return the portal pointer affine to cpu 913 * @cpu: the cpu whose affine portal is the subject of the query 914 */ 915 struct qman_portal *qman_get_affine_portal(int cpu); 916 917 /** 918 * qman_p_poll_dqrr - process DQRR (fast-path) entries 919 * @limit: the maximum number of DQRR entries to process 920 * 921 * Use of this function requires that DQRR processing not be interrupt-driven. 922 * The return value represents the number of DQRR entries processed. 923 */ 924 int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit); 925 926 /** 927 * qman_p_static_dequeue_add - Add pool channels to the portal SDQCR 928 * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n) 929 * 930 * Adds a set of pool channels to the portal's static dequeue command register 931 * (SDQCR). The requested pools are limited to those the portal has dequeue 932 * access to. 933 */ 934 void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools); 935 936 /* FQ management */ 937 /** 938 * qman_create_fq - Allocates a FQ 939 * @fqid: the index of the FQD to encapsulate, must be "Out of Service" 940 * @flags: bit-mask of QMAN_FQ_FLAG_*** options 941 * @fq: memory for storing the 'fq', with callbacks filled in 942 * 943 * Creates a frame queue object for the given @fqid, unless the 944 * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is 945 * dynamically allocated (or the function fails if none are available). Once 946 * created, the caller should not touch the memory at 'fq' except as extended to 947 * adjacent memory for user-defined fields (see the definition of "struct 948 * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to 949 * pre-existing frame-queues that aren't to be otherwise interfered with, it 950 * prevents all other modifications to the frame queue. The TO_DCPORTAL flag 951 * causes the driver to honour any context_b modifications requested in the 952 * qm_init_fq() API, as this indicates the frame queue will be consumed by a 953 * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by 954 * software portals, the context_b field is controlled by the driver and can't 955 * be modified by the caller. 956 */ 957 int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq); 958 959 /** 960 * qman_destroy_fq - Deallocates a FQ 961 * @fq: the frame queue object to release 962 * 963 * The memory for this frame queue object ('fq' provided in qman_create_fq()) is 964 * not deallocated but the caller regains ownership, to do with as desired. The 965 * FQ must be in the 'out-of-service' or in the 'parked' state. 966 */ 967 void qman_destroy_fq(struct qman_fq *fq); 968 969 /** 970 * qman_fq_fqid - Queries the frame queue ID of a FQ object 971 * @fq: the frame queue object to query 972 */ 973 u32 qman_fq_fqid(struct qman_fq *fq); 974 975 /** 976 * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled" 977 * @fq: the frame queue object to modify, must be 'parked' or new. 978 * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options 979 * @opts: the FQ-modification settings, as defined in the low-level API 980 * 981 * The @opts parameter comes from the low-level portal API. Select 982 * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled 983 * rather than parked. NB, @opts can be NULL. 984 * 985 * Note that some fields and options within @opts may be ignored or overwritten 986 * by the driver; 987 * 1. the 'count' and 'fqid' fields are always ignored (this operation only 988 * affects one frame queue: @fq). 989 * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated 990 * 'fqd' structure's 'context_b' field are sometimes overwritten; 991 * - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is 992 * initialised to a value used by the driver for demux. 993 * - if context_b is initialised for demux, so is context_a in case stashing 994 * is requested (see item 4). 995 * (So caller control of context_b is only possible for TO_DCPORTAL frame queue 996 * objects.) 997 * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's 998 * 'dest::channel' field will be overwritten to match the portal used to issue 999 * the command. If the WE_DESTWQ write-enable bit had already been set by the 1000 * caller, the channel workqueue will be left as-is, otherwise the write-enable 1001 * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag 1002 * isn't set, the destination channel/workqueue fields and the write-enable bit 1003 * are left as-is. 1004 * 4. if the driver overwrites context_a/b for demux, then if 1005 * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite 1006 * context_a.address fields and will leave the stashing fields provided by the 1007 * user alone, otherwise it will zero out the context_a.stashing fields. 1008 */ 1009 int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts); 1010 1011 /** 1012 * qman_schedule_fq - Schedules a FQ 1013 * @fq: the frame queue object to schedule, must be 'parked' 1014 * 1015 * Schedules the frame queue, which must be Parked, which takes it to 1016 * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level. 1017 */ 1018 int qman_schedule_fq(struct qman_fq *fq); 1019 1020 /** 1021 * qman_retire_fq - Retires a FQ 1022 * @fq: the frame queue object to retire 1023 * @flags: FQ flags (QMAN_FQ_STATE*) if retirement completes immediately 1024 * 1025 * Retires the frame queue. This returns zero if it succeeds immediately, +1 if 1026 * the retirement was started asynchronously, otherwise it returns negative for 1027 * failure. When this function returns zero, @flags is set to indicate whether 1028 * the retired FQ is empty and/or whether it has any ORL fragments (to show up 1029 * as ERNs). Otherwise the corresponding flags will be known when a subsequent 1030 * FQRN message shows up on the portal's message ring. 1031 * 1032 * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or 1033 * Active state), the completion will be via the message ring as a FQRN - but 1034 * the corresponding callback may occur before this function returns!! Ie. the 1035 * caller should be prepared to accept the callback as the function is called, 1036 * not only once it has returned. 1037 */ 1038 int qman_retire_fq(struct qman_fq *fq, u32 *flags); 1039 1040 /** 1041 * qman_oos_fq - Puts a FQ "out of service" 1042 * @fq: the frame queue object to be put out-of-service, must be 'retired' 1043 * 1044 * The frame queue must be retired and empty, and if any order restoration list 1045 * was released as ERNs at the time of retirement, they must all be consumed. 1046 */ 1047 int qman_oos_fq(struct qman_fq *fq); 1048 1049 /* 1050 * qman_volatile_dequeue - Issue a volatile dequeue command 1051 * @fq: the frame queue object to dequeue from 1052 * @flags: a bit-mask of QMAN_VOLATILE_FLAG_*** options 1053 * @vdqcr: bit mask of QM_VDQCR_*** options, as per qm_dqrr_vdqcr_set() 1054 * 1055 * Attempts to lock access to the portal's VDQCR volatile dequeue functionality. 1056 * The function will block and sleep if QMAN_VOLATILE_FLAG_WAIT is specified and 1057 * the VDQCR is already in use, otherwise returns non-zero for failure. If 1058 * QMAN_VOLATILE_FLAG_FINISH is specified, the function will only return once 1059 * the VDQCR command has finished executing (ie. once the callback for the last 1060 * DQRR entry resulting from the VDQCR command has been called). If not using 1061 * the FINISH flag, completion can be determined either by detecting the 1062 * presence of the QM_DQRR_STAT_UNSCHEDULED and QM_DQRR_STAT_DQCR_EXPIRED bits 1063 * in the "stat" parameter passed to the FQ's dequeue callback, or by waiting 1064 * for the QMAN_FQ_STATE_VDQCR bit to disappear. 1065 */ 1066 int qman_volatile_dequeue(struct qman_fq *fq, u32 flags, u32 vdqcr); 1067 1068 /** 1069 * qman_enqueue - Enqueue a frame to a frame queue 1070 * @fq: the frame queue object to enqueue to 1071 * @fd: a descriptor of the frame to be enqueued 1072 * 1073 * Fills an entry in the EQCR of portal @qm to enqueue the frame described by 1074 * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid' 1075 * field is ignored. The return value is non-zero on error, such as ring full. 1076 */ 1077 int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd); 1078 1079 /** 1080 * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs 1081 * @result: is set by the API to the base FQID of the allocated range 1082 * @count: the number of FQIDs required 1083 * 1084 * Returns 0 on success, or a negative error code. 1085 */ 1086 int qman_alloc_fqid_range(u32 *result, u32 count); 1087 #define qman_alloc_fqid(result) qman_alloc_fqid_range(result, 1) 1088 1089 /** 1090 * qman_release_fqid - Release the specified frame queue ID 1091 * @fqid: the FQID to be released back to the resource pool 1092 * 1093 * This function can also be used to seed the allocator with 1094 * FQID ranges that it can subsequently allocate from. 1095 * Returns 0 on success, or a negative error code. 1096 */ 1097 int qman_release_fqid(u32 fqid); 1098 1099 /** 1100 * qman_query_fq_np - Queries non-programmable FQD fields 1101 * @fq: the frame queue object to be queried 1102 * @np: storage for the queried FQD fields 1103 */ 1104 int qman_query_fq_np(struct qman_fq *fq, struct qm_mcr_queryfq_np *np); 1105 1106 /* Pool-channel management */ 1107 /** 1108 * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs 1109 * @result: is set by the API to the base pool-channel ID of the allocated range 1110 * @count: the number of pool-channel IDs required 1111 * 1112 * Returns 0 on success, or a negative error code. 1113 */ 1114 int qman_alloc_pool_range(u32 *result, u32 count); 1115 #define qman_alloc_pool(result) qman_alloc_pool_range(result, 1) 1116 1117 /** 1118 * qman_release_pool - Release the specified pool-channel ID 1119 * @id: the pool-chan ID to be released back to the resource pool 1120 * 1121 * This function can also be used to seed the allocator with 1122 * pool-channel ID ranges that it can subsequently allocate from. 1123 * Returns 0 on success, or a negative error code. 1124 */ 1125 int qman_release_pool(u32 id); 1126 1127 /* CGR management */ 1128 /** 1129 * qman_create_cgr - Register a congestion group object 1130 * @cgr: the 'cgr' object, with fields filled in 1131 * @flags: QMAN_CGR_FLAG_* values 1132 * @opts: optional state of CGR settings 1133 * 1134 * Registers this object to receiving congestion entry/exit callbacks on the 1135 * portal affine to the cpu portal on which this API is executed. If opts is 1136 * NULL then only the callback (cgr->cb) function is registered. If @flags 1137 * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset 1138 * any unspecified parameters) will be used rather than a modify hw hardware 1139 * (which only modifies the specified parameters). 1140 */ 1141 int qman_create_cgr(struct qman_cgr *cgr, u32 flags, 1142 struct qm_mcc_initcgr *opts); 1143 1144 /** 1145 * qman_delete_cgr - Deregisters a congestion group object 1146 * @cgr: the 'cgr' object to deregister 1147 * 1148 * "Unplugs" this CGR object from the portal affine to the cpu on which this API 1149 * is executed. This must be excuted on the same affine portal on which it was 1150 * created. 1151 */ 1152 int qman_delete_cgr(struct qman_cgr *cgr); 1153 1154 /** 1155 * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU 1156 * @cgr: the 'cgr' object to deregister 1157 * 1158 * This will select the proper CPU and run there qman_delete_cgr(). 1159 */ 1160 void qman_delete_cgr_safe(struct qman_cgr *cgr); 1161 1162 /** 1163 * qman_query_cgr_congested - Queries CGR's congestion status 1164 * @cgr: the 'cgr' object to query 1165 * @result: returns 'cgr's congestion status, 1 (true) if congested 1166 */ 1167 int qman_query_cgr_congested(struct qman_cgr *cgr, bool *result); 1168 1169 /** 1170 * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs 1171 * @result: is set by the API to the base CGR ID of the allocated range 1172 * @count: the number of CGR IDs required 1173 * 1174 * Returns 0 on success, or a negative error code. 1175 */ 1176 int qman_alloc_cgrid_range(u32 *result, u32 count); 1177 #define qman_alloc_cgrid(result) qman_alloc_cgrid_range(result, 1) 1178 1179 /** 1180 * qman_release_cgrid - Release the specified CGR ID 1181 * @id: the CGR ID to be released back to the resource pool 1182 * 1183 * This function can also be used to seed the allocator with 1184 * CGR ID ranges that it can subsequently allocate from. 1185 * Returns 0 on success, or a negative error code. 1186 */ 1187 int qman_release_cgrid(u32 id); 1188 1189 /** 1190 * qman_is_probed - Check if qman is probed 1191 * 1192 * Returns 1 if the qman driver successfully probed, -1 if the qman driver 1193 * failed to probe or 0 if the qman driver did not probed yet. 1194 */ 1195 int qman_is_probed(void); 1196 1197 /** 1198 * qman_portals_probed - Check if all cpu bound qman portals are probed 1199 * 1200 * Returns 1 if all the required cpu bound qman portals successfully probed, 1201 * -1 if probe errors appeared or 0 if the qman portals did not yet finished 1202 * probing. 1203 */ 1204 int qman_portals_probed(void); 1205 1206 /** 1207 * qman_dqrr_get_ithresh - Get coalesce interrupt threshold 1208 * @portal: portal to get the value for 1209 * @ithresh: threshold pointer 1210 */ 1211 void qman_dqrr_get_ithresh(struct qman_portal *portal, u8 *ithresh); 1212 1213 /** 1214 * qman_dqrr_set_ithresh - Set coalesce interrupt threshold 1215 * @portal: portal to set the new value on 1216 * @ithresh: new threshold value 1217 * 1218 * Returns 0 on success, or a negative error code. 1219 */ 1220 int qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh); 1221 1222 /** 1223 * qman_dqrr_get_iperiod - Get coalesce interrupt period 1224 * @portal: portal to get the value for 1225 * @iperiod: period pointer 1226 */ 1227 void qman_portal_get_iperiod(struct qman_portal *portal, u32 *iperiod); 1228 1229 /** 1230 * qman_dqrr_set_iperiod - Set coalesce interrupt period 1231 * @portal: portal to set the new value on 1232 * @ithresh: new period value 1233 * 1234 * Returns 0 on success, or a negative error code. 1235 */ 1236 int qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod); 1237 1238 #endif /* __FSL_QMAN_H */ 1239