xref: /openbmc/linux/include/soc/arc/mcip.h (revision 664a722b)
1 /*
2  * ARConnect IP Support (Multi core enabler: Cross core IPI, RTC ...)
3  *
4  * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #ifndef __SOC_ARC_MCIP_H
12 #define __SOC_ARC_MCIP_H
13 
14 #include <soc/arc/aux.h>
15 
16 #define ARC_REG_MCIP_BCR	0x0d0
17 #define ARC_REG_MCIP_CMD	0x600
18 #define ARC_REG_MCIP_WDATA	0x601
19 #define ARC_REG_MCIP_READBACK	0x602
20 
21 struct mcip_cmd {
22 #ifdef CONFIG_CPU_BIG_ENDIAN
23 	unsigned int pad:8, param:16, cmd:8;
24 #else
25 	unsigned int cmd:8, param:16, pad:8;
26 #endif
27 
28 #define CMD_INTRPT_GENERATE_IRQ		0x01
29 #define CMD_INTRPT_GENERATE_ACK		0x02
30 #define CMD_INTRPT_READ_STATUS		0x03
31 #define CMD_INTRPT_CHECK_SOURCE		0x04
32 
33 /* Semaphore Commands */
34 #define CMD_SEMA_CLAIM_AND_READ		0x11
35 #define CMD_SEMA_RELEASE		0x12
36 
37 #define CMD_DEBUG_SET_MASK		0x34
38 #define CMD_DEBUG_SET_SELECT		0x36
39 
40 #define CMD_GFRC_READ_LO		0x42
41 #define CMD_GFRC_READ_HI		0x43
42 
43 #define CMD_IDU_ENABLE			0x71
44 #define CMD_IDU_DISABLE			0x72
45 #define CMD_IDU_SET_MODE		0x74
46 #define CMD_IDU_SET_DEST		0x76
47 #define CMD_IDU_SET_MASK		0x7C
48 
49 #define IDU_M_TRIG_LEVEL		0x0
50 #define IDU_M_TRIG_EDGE			0x1
51 
52 #define IDU_M_DISTRI_RR			0x0
53 #define IDU_M_DISTRI_DEST		0x2
54 };
55 
56 struct mcip_bcr {
57 #ifdef CONFIG_CPU_BIG_ENDIAN
58 		unsigned int pad4:6, pw_dom:1, pad3:1,
59 			     idu:1, pad2:1, num_cores:6,
60 			     pad:1,  gfrc:1, dbg:1, pw:1,
61 			     msg:1, sem:1, ipi:1, slv:1,
62 			     ver:8;
63 #else
64 		unsigned int ver:8,
65 			     slv:1, ipi:1, sem:1, msg:1,
66 			     pw:1, dbg:1, gfrc:1, pad:1,
67 			     num_cores:6, pad2:1, idu:1,
68 			     pad3:1, pw_dom:1, pad4:6;
69 #endif
70 };
71 
72 /*
73  * MCIP programming model
74  *
75  * - Simple commands write {cmd:8,param:16} to MCIP_CMD aux reg
76  *   (param could be irq, common_irq, core_id ...)
77  * - More involved commands setup MCIP_WDATA with cmd specific data
78  *   before invoking the simple command
79  */
80 static inline void __mcip_cmd(unsigned int cmd, unsigned int param)
81 {
82 	struct mcip_cmd buf;
83 
84 	buf.pad = 0;
85 	buf.cmd = cmd;
86 	buf.param = param;
87 
88 	WRITE_AUX(ARC_REG_MCIP_CMD, buf);
89 }
90 
91 /*
92  * Setup additional data for a cmd
93  * Callers need to lock to ensure atomicity
94  */
95 static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param,
96 				   unsigned int data)
97 {
98 	write_aux_reg(ARC_REG_MCIP_WDATA, data);
99 
100 	__mcip_cmd(cmd, param);
101 }
102 
103 #endif
104