1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_GENERIC_H 3 #define _SCSI_GENERIC_H 4 5 #include <linux/compiler.h> 6 7 /* 8 * History: 9 * Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user 10 * process control of SCSI devices. 11 * Development Sponsored by Killy Corp. NY NY 12 * 13 * Original driver (sg.h): 14 * Copyright (C) 1992 Lawrence Foard 15 * Version 2 and 3 extensions to driver: 16 * Copyright (C) 1998 - 2014 Douglas Gilbert 17 * 18 * Version: 3.5.36 (20140603) 19 * This version is for 2.6 and 3 series kernels. 20 * 21 * Documentation 22 * ============= 23 * A web site for the SG device driver can be found at: 24 * http://sg.danny.cz/sg [alternatively check the MAINTAINERS file] 25 * The documentation for the sg version 3 driver can be found at: 26 * http://sg.danny.cz/sg/p/sg_v3_ho.html 27 * Also see: <kernel_source>/Documentation/scsi/scsi-generic.rst 28 * 29 * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html 30 */ 31 32 33 typedef struct sg_iovec /* same structure as used by readv() Linux system */ 34 { /* call. It defines one scatter-gather element. */ 35 void __user *iov_base; /* Starting address */ 36 size_t iov_len; /* Length in bytes */ 37 } sg_iovec_t; 38 39 40 typedef struct sg_io_hdr 41 { 42 int interface_id; /* [i] 'S' for SCSI generic (required) */ 43 int dxfer_direction; /* [i] data transfer direction */ 44 unsigned char cmd_len; /* [i] SCSI command length */ 45 unsigned char mx_sb_len; /* [i] max length to write to sbp */ 46 unsigned short iovec_count; /* [i] 0 implies no scatter gather */ 47 unsigned int dxfer_len; /* [i] byte count of data transfer */ 48 void __user *dxferp; /* [i], [*io] points to data transfer memory 49 or scatter gather list */ 50 unsigned char __user *cmdp; /* [i], [*i] points to command to perform */ 51 void __user *sbp; /* [i], [*o] points to sense_buffer memory */ 52 unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ 53 unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */ 54 int pack_id; /* [i->o] unused internally (normally) */ 55 void __user * usr_ptr; /* [i->o] unused internally */ 56 unsigned char status; /* [o] scsi status */ 57 unsigned char masked_status;/* [o] shifted, masked scsi status */ 58 unsigned char msg_status; /* [o] messaging level data (optional) */ 59 unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ 60 unsigned short host_status; /* [o] errors from host adapter */ 61 unsigned short driver_status;/* [o] errors from software driver */ 62 int resid; /* [o] dxfer_len - actual_transferred */ 63 unsigned int duration; /* [o] time taken by cmd (unit: millisec) */ 64 unsigned int info; /* [o] auxiliary information */ 65 } sg_io_hdr_t; /* 64 bytes long (on i386) */ 66 67 #if defined(__KERNEL__) 68 #include <linux/compat.h> 69 70 struct compat_sg_io_hdr { 71 compat_int_t interface_id; /* [i] 'S' for SCSI generic (required) */ 72 compat_int_t dxfer_direction; /* [i] data transfer direction */ 73 unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */ 74 unsigned char mx_sb_len; /* [i] max length to write to sbp */ 75 unsigned short iovec_count; /* [i] 0 implies no scatter gather */ 76 compat_uint_t dxfer_len; /* [i] byte count of data transfer */ 77 compat_uint_t dxferp; /* [i], [*io] points to data transfer memory 78 or scatter gather list */ 79 compat_uptr_t cmdp; /* [i], [*i] points to command to perform */ 80 compat_uptr_t sbp; /* [i], [*o] points to sense_buffer memory */ 81 compat_uint_t timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ 82 compat_uint_t flags; /* [i] 0 -> default, see SG_FLAG... */ 83 compat_int_t pack_id; /* [i->o] unused internally (normally) */ 84 compat_uptr_t usr_ptr; /* [i->o] unused internally */ 85 unsigned char status; /* [o] scsi status */ 86 unsigned char masked_status; /* [o] shifted, masked scsi status */ 87 unsigned char msg_status; /* [o] messaging level data (optional) */ 88 unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ 89 unsigned short host_status; /* [o] errors from host adapter */ 90 unsigned short driver_status; /* [o] errors from software driver */ 91 compat_int_t resid; /* [o] dxfer_len - actual_transferred */ 92 compat_uint_t duration; /* [o] time taken by cmd (unit: millisec) */ 93 compat_uint_t info; /* [o] auxiliary information */ 94 }; 95 #endif 96 97 #define SG_INTERFACE_ID_ORIG 'S' 98 99 /* Use negative values to flag difference from original sg_header structure */ 100 #define SG_DXFER_NONE (-1) /* e.g. a SCSI Test Unit Ready command */ 101 #define SG_DXFER_TO_DEV (-2) /* e.g. a SCSI WRITE command */ 102 #define SG_DXFER_FROM_DEV (-3) /* e.g. a SCSI READ command */ 103 #define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the 104 additional property than during indirect 105 IO the user buffer is copied into the 106 kernel buffers before the transfer */ 107 #define SG_DXFER_UNKNOWN (-5) /* Unknown data direction */ 108 109 /* following flag values can be "or"-ed together */ 110 #define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */ 111 #define SG_FLAG_UNUSED_LUN_INHIBIT 2 /* default is overwrite lun in SCSI */ 112 /* command block (when <= SCSI_2) */ 113 #define SG_FLAG_MMAP_IO 4 /* request memory mapped IO */ 114 #define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */ 115 /* user space (debug indirect IO) */ 116 /* defaults:: for sg driver: Q_AT_HEAD; for block layer: Q_AT_TAIL */ 117 #define SG_FLAG_Q_AT_TAIL 0x10 118 #define SG_FLAG_Q_AT_HEAD 0x20 119 120 /* following 'info' values are "or"-ed together */ 121 #define SG_INFO_OK_MASK 0x1 122 #define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */ 123 #define SG_INFO_CHECK 0x1 /* something abnormal happened */ 124 125 #define SG_INFO_DIRECT_IO_MASK 0x6 126 #define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */ 127 #define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */ 128 #define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */ 129 130 /* 131 * Obsolete DRIVER_SENSE driver byte 132 * 133 * Originally the SCSI midlayer would set the DRIVER_SENSE driver byte when 134 * a sense code was generated and a sense buffer was allocated. 135 * However, as nowadays every scsi command has a sense code allocated this 136 * distinction became moot as one could check the sense buffer directly. 137 * Consequently this byte is not set anymore from the midlayer, but SG will 138 * keep setting this byte to be compatible with previous releases. 139 */ 140 #define DRIVER_SENSE 0x08 141 /* Obsolete driver_byte() declaration */ 142 #define driver_byte(result) (((result) >> 24) & 0xff) 143 144 /* 145 * Original linux SCSI Status codes. They are shifted 1 bit right 146 * from those found in the SCSI standards. 147 */ 148 149 #define GOOD 0x00 150 #define CHECK_CONDITION 0x01 151 #define CONDITION_GOOD 0x02 152 #define BUSY 0x04 153 #define INTERMEDIATE_GOOD 0x08 154 #define INTERMEDIATE_C_GOOD 0x0a 155 #define RESERVATION_CONFLICT 0x0c 156 #define COMMAND_TERMINATED 0x11 157 #define QUEUE_FULL 0x14 158 #define ACA_ACTIVE 0x18 159 #define TASK_ABORTED 0x20 160 161 /* Obsolete status_byte() declaration */ 162 #define sg_status_byte(result) (((result) >> 1) & 0x7f) 163 164 typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */ 165 int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */ 166 int channel; 167 int scsi_id; /* scsi id of target device */ 168 int lun; 169 int scsi_type; /* TYPE_... defined in scsi/scsi.h */ 170 short h_cmd_per_lun;/* host (adapter) maximum commands per lun */ 171 short d_queue_depth;/* device (or adapter) maximum queue length */ 172 int unused[2]; /* probably find a good use, set 0 for now */ 173 } sg_scsi_id_t; /* 32 bytes long on i386 */ 174 175 typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */ 176 char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */ 177 char orphan; /* 0 -> normal request, 1 -> from interrupted SG_IO */ 178 char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */ 179 char problem; /* 0 -> no problem detected, 1 -> error to report */ 180 int pack_id; /* pack_id associated with request */ 181 void __user *usr_ptr; /* user provided pointer (in new interface) */ 182 unsigned int duration; /* millisecs elapsed since written (req_state==1) 183 or request duration (req_state==2) */ 184 int unused; 185 } sg_req_info_t; /* 20 bytes long on i386 */ 186 187 188 /* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow. 189 [Those that only apply to the SG 2.x drivers are at the end of the file.] 190 (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */ 191 192 #define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */ 193 194 /* Used to configure SCSI command transformation layer for ATAPI devices */ 195 /* Only supported by the ide-scsi driver */ 196 #define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */ 197 /* 3rd arg = 0 to disable transform, 1 to enable it */ 198 #define SG_GET_TRANSFORM 0x2205 199 200 #define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */ 201 #define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */ 202 203 /* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */ 204 #define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */ 205 /* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */ 206 207 /* Override host setting and always DMA using low memory ( <16MB on i386) */ 208 #define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ 209 #define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ 210 211 /* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which 212 tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN. 213 If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0 214 then pack_id ignored by read() and oldest readable fetched. */ 215 #define SG_SET_FORCE_PACK_ID 0x227b 216 #define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */ 217 218 #define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */ 219 220 /* Yields max scatter gather tablesize allowed by current host adapter */ 221 #define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ 222 223 #define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */ 224 225 /* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */ 226 #define SG_SCSI_RESET 0x2284 227 /* Associated values that can be given to SG_SCSI_RESET follow. 228 * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS 229 * or _HOST reset value so only that action is attempted. */ 230 #define SG_SCSI_RESET_NOTHING 0 231 #define SG_SCSI_RESET_DEVICE 1 232 #define SG_SCSI_RESET_BUS 2 233 #define SG_SCSI_RESET_HOST 3 234 #define SG_SCSI_RESET_TARGET 4 235 #define SG_SCSI_RESET_NO_ESCALATE 0x100 236 237 /* synchronous SCSI command ioctl, (only in version 3 interface) */ 238 #define SG_IO 0x2285 /* similar effect as write() followed by read() */ 239 240 #define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */ 241 242 /* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */ 243 #define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */ 244 #define SG_GET_KEEP_ORPHAN 0x2288 245 246 /* yields scsi midlevel's access_count for this SCSI device */ 247 #define SG_GET_ACCESS_COUNT 0x2289 248 249 250 #define SG_SCATTER_SZ (8 * 4096) 251 /* Largest size (in bytes) a single scatter-gather list element can have. 252 The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'. 253 This value should be a power of 2 (and may be rounded up internally). 254 If scatter-gather is not supported by adapter then this value is the 255 largest data block that can be read/written by a single scsi command. */ 256 257 #define SG_DEFAULT_RETRIES 0 258 259 /* Defaults, commented if they differ from original sg driver */ 260 #define SG_DEF_FORCE_PACK_ID 0 261 #define SG_DEF_KEEP_ORPHAN 0 262 #define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */ 263 264 /* maximum outstanding requests, write() yields EDOM if exceeded */ 265 #define SG_MAX_QUEUE 16 266 267 #define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ 268 269 /* Alternate style type names, "..._t" variants preferred */ 270 typedef struct sg_io_hdr Sg_io_hdr; 271 typedef struct sg_io_vec Sg_io_vec; 272 typedef struct sg_scsi_id Sg_scsi_id; 273 typedef struct sg_req_info Sg_req_info; 274 275 276 /* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */ 277 /* The older SG interface based on the 'sg_header' structure follows. */ 278 /* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ 279 280 #define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */ 281 282 struct sg_header 283 { 284 int pack_len; /* [o] reply_len (ie useless), ignored as input */ 285 int reply_len; /* [i] max length of expected reply (inc. sg_header) */ 286 int pack_id; /* [io] id number of packet (use ints >= 0) */ 287 int result; /* [o] 0==ok, else (+ve) Unix errno (best ignored) */ 288 unsigned int twelve_byte:1; 289 /* [i] Force 12 byte command length for group 6 & 7 commands */ 290 unsigned int target_status:5; /* [o] scsi status from target */ 291 unsigned int host_status:8; /* [o] host status (see "DID" codes) */ 292 unsigned int driver_status:8; /* [o] driver status+suggestion */ 293 unsigned int other_flags:10; /* unused */ 294 unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases: 295 when target_status is CHECK_CONDITION or 296 when target_status is COMMAND_TERMINATED or 297 when (driver_status & DRIVER_SENSE) is true. */ 298 }; /* This structure is 36 bytes long on i386 */ 299 300 301 /* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t 302 interface is used. They are kept for backward compatibility with 303 the original and version 2 drivers. */ 304 305 #define SG_SET_TIMEOUT 0x2201 /* unit: jiffies (10ms on i386) */ 306 #define SG_GET_TIMEOUT 0x2202 /* yield timeout as _return_ value */ 307 308 /* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q. 309 Each time a sg_io_hdr_t object is seen on this file descriptor, this 310 command queuing flag is set on (overriding the previous setting). */ 311 #define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on) */ 312 #define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1 */ 313 314 /* Turn on/off error sense trace (1 and 0 respectively, default is off). 315 Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */ 316 #define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ 317 318 #define SG_NEXT_CMD_LEN 0x2283 /* override SCSI command length with given 319 number on the next write() on this file descriptor */ 320 321 322 /* Defaults, commented if they differ from original sg driver */ 323 #ifdef __KERNEL__ 324 #define SG_DEFAULT_TIMEOUT_USER (60*USER_HZ) /* HZ == 'jiffies in 1 second' */ 325 #else 326 #define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */ 327 #endif 328 329 #define SG_DEF_COMMAND_Q 0 /* command queuing is always on when 330 the new interface is used */ 331 #define SG_DEF_UNDERRUN_FLAG 0 332 333 #endif 334