1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef SCSI_TRANSPORT_SAS_H 3 #define SCSI_TRANSPORT_SAS_H 4 5 #include <linux/transport_class.h> 6 #include <linux/types.h> 7 #include <linux/mutex.h> 8 #include <scsi/sas.h> 9 #include <linux/bsg-lib.h> 10 11 struct scsi_transport_template; 12 struct sas_rphy; 13 struct request; 14 15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS) 16 static inline int scsi_is_sas_rphy(const struct device *sdev) 17 { 18 return 0; 19 } 20 #else 21 extern int scsi_is_sas_rphy(const struct device *); 22 #endif 23 24 static inline int sas_protocol_ata(enum sas_protocol proto) 25 { 26 return ((proto & SAS_PROTOCOL_SATA) || 27 (proto & SAS_PROTOCOL_STP))? 1 : 0; 28 } 29 30 enum sas_linkrate { 31 /* These Values are defined in the SAS standard */ 32 SAS_LINK_RATE_UNKNOWN = 0, 33 SAS_PHY_DISABLED = 1, 34 SAS_PHY_RESET_PROBLEM = 2, 35 SAS_SATA_SPINUP_HOLD = 3, 36 SAS_SATA_PORT_SELECTOR = 4, 37 SAS_PHY_RESET_IN_PROGRESS = 5, 38 SAS_LINK_RATE_1_5_GBPS = 8, 39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS, 40 SAS_LINK_RATE_3_0_GBPS = 9, 41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS, 42 SAS_LINK_RATE_6_0_GBPS = 10, 43 SAS_LINK_RATE_12_0_GBPS = 11, 44 /* These are virtual to the transport class and may never 45 * be signalled normally since the standard defined field 46 * is only 4 bits */ 47 SAS_LINK_RATE_FAILED = 0x10, 48 SAS_PHY_VIRTUAL = 0x11, 49 }; 50 51 struct sas_identify { 52 enum sas_device_type device_type; 53 enum sas_protocol initiator_port_protocols; 54 enum sas_protocol target_port_protocols; 55 u64 sas_address; 56 u8 phy_identifier; 57 }; 58 59 struct sas_phy { 60 struct device dev; 61 int number; 62 int enabled; 63 64 /* phy identification */ 65 struct sas_identify identify; 66 67 /* phy attributes */ 68 enum sas_linkrate negotiated_linkrate; 69 enum sas_linkrate minimum_linkrate_hw; 70 enum sas_linkrate minimum_linkrate; 71 enum sas_linkrate maximum_linkrate_hw; 72 enum sas_linkrate maximum_linkrate; 73 74 /* link error statistics */ 75 u32 invalid_dword_count; 76 u32 running_disparity_error_count; 77 u32 loss_of_dword_sync_count; 78 u32 phy_reset_problem_count; 79 80 /* for the list of phys belonging to a port */ 81 struct list_head port_siblings; 82 83 /* available to the lldd */ 84 void *hostdata; 85 }; 86 87 #define dev_to_phy(d) \ 88 container_of((d), struct sas_phy, dev) 89 #define transport_class_to_phy(dev) \ 90 dev_to_phy((dev)->parent) 91 #define phy_to_shost(phy) \ 92 dev_to_shost((phy)->dev.parent) 93 94 struct request_queue; 95 struct sas_rphy { 96 struct device dev; 97 struct sas_identify identify; 98 struct list_head list; 99 struct request_queue *q; 100 u32 scsi_target_id; 101 }; 102 103 #define dev_to_rphy(d) \ 104 container_of((d), struct sas_rphy, dev) 105 #define transport_class_to_rphy(dev) \ 106 dev_to_rphy((dev)->parent) 107 #define rphy_to_shost(rphy) \ 108 dev_to_shost((rphy)->dev.parent) 109 #define target_to_rphy(targ) \ 110 dev_to_rphy((targ)->dev.parent) 111 112 struct sas_end_device { 113 struct sas_rphy rphy; 114 /* flags */ 115 unsigned ready_led_meaning:1; 116 unsigned tlr_supported:1; 117 unsigned tlr_enabled:1; 118 /* parameters */ 119 u16 I_T_nexus_loss_timeout; 120 u16 initiator_response_timeout; 121 }; 122 #define rphy_to_end_device(r) \ 123 container_of((r), struct sas_end_device, rphy) 124 125 struct sas_expander_device { 126 int level; 127 int next_port_id; 128 129 #define SAS_EXPANDER_VENDOR_ID_LEN 8 130 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1]; 131 #define SAS_EXPANDER_PRODUCT_ID_LEN 16 132 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1]; 133 #define SAS_EXPANDER_PRODUCT_REV_LEN 4 134 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1]; 135 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8 136 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1]; 137 u16 component_id; 138 u8 component_revision_id; 139 140 struct sas_rphy rphy; 141 142 }; 143 #define rphy_to_expander_device(r) \ 144 container_of((r), struct sas_expander_device, rphy) 145 146 struct sas_port { 147 struct device dev; 148 149 int port_identifier; 150 int num_phys; 151 /* port flags */ 152 unsigned int is_backlink:1; 153 154 /* the other end of the link */ 155 struct sas_rphy *rphy; 156 157 struct mutex phy_list_mutex; 158 struct list_head phy_list; 159 struct list_head del_list; /* libsas only */ 160 }; 161 162 #define dev_to_sas_port(d) \ 163 container_of((d), struct sas_port, dev) 164 #define transport_class_to_sas_port(dev) \ 165 dev_to_sas_port((dev)->parent) 166 167 struct sas_phy_linkrates { 168 enum sas_linkrate maximum_linkrate; 169 enum sas_linkrate minimum_linkrate; 170 }; 171 172 /* The functions by which the transport class and the driver communicate */ 173 struct sas_function_template { 174 int (*get_linkerrors)(struct sas_phy *); 175 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *); 176 int (*get_bay_identifier)(struct sas_rphy *); 177 int (*phy_reset)(struct sas_phy *, int); 178 int (*phy_enable)(struct sas_phy *, int); 179 int (*phy_setup)(struct sas_phy *); 180 void (*phy_release)(struct sas_phy *); 181 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *); 182 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *, 183 struct sas_rphy *); 184 }; 185 186 187 void sas_remove_children(struct device *); 188 extern void sas_remove_host(struct Scsi_Host *); 189 190 extern struct sas_phy *sas_phy_alloc(struct device *, int); 191 extern void sas_phy_free(struct sas_phy *); 192 extern int sas_phy_add(struct sas_phy *); 193 extern void sas_phy_delete(struct sas_phy *); 194 extern int scsi_is_sas_phy(const struct device *); 195 196 u64 sas_get_address(struct scsi_device *); 197 unsigned int sas_tlr_supported(struct scsi_device *); 198 unsigned int sas_is_tlr_enabled(struct scsi_device *); 199 void sas_disable_tlr(struct scsi_device *); 200 void sas_enable_tlr(struct scsi_device *); 201 202 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *); 203 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type); 204 void sas_rphy_free(struct sas_rphy *); 205 extern int sas_rphy_add(struct sas_rphy *); 206 extern void sas_rphy_remove(struct sas_rphy *); 207 extern void sas_rphy_delete(struct sas_rphy *); 208 extern void sas_rphy_unlink(struct sas_rphy *); 209 210 struct sas_port *sas_port_alloc(struct device *, int); 211 struct sas_port *sas_port_alloc_num(struct device *); 212 int sas_port_add(struct sas_port *); 213 void sas_port_free(struct sas_port *); 214 void sas_port_delete(struct sas_port *); 215 void sas_port_add_phy(struct sas_port *, struct sas_phy *); 216 void sas_port_delete_phy(struct sas_port *, struct sas_phy *); 217 void sas_port_mark_backlink(struct sas_port *); 218 int scsi_is_sas_port(const struct device *); 219 struct sas_phy *sas_port_get_phy(struct sas_port *port); 220 static inline void sas_port_put_phy(struct sas_phy *phy) 221 { 222 if (phy) 223 put_device(&phy->dev); 224 } 225 226 extern struct scsi_transport_template * 227 sas_attach_transport(struct sas_function_template *); 228 extern void sas_release_transport(struct scsi_transport_template *); 229 int sas_read_port_mode_page(struct scsi_device *); 230 231 static inline int 232 scsi_is_sas_expander_device(struct device *dev) 233 { 234 struct sas_rphy *rphy; 235 if (!scsi_is_sas_rphy(dev)) 236 return 0; 237 rphy = dev_to_rphy(dev); 238 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE || 239 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE; 240 } 241 242 #define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent) 243 244 #endif /* SCSI_TRANSPORT_SAS_H */ 245