1 #ifndef _SCSI_SCSI_DEVINFO_H 2 #define _SCSI_SCSI_DEVINFO_H 3 /* 4 * Flags for SCSI devices that need special treatment 5 */ 6 #define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ 7 #define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, 8 deprecated: Use max_luns=N */ 9 #define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ 10 #define BLIST_KEY 0x008 /* unlock by special command */ 11 #define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ 12 #define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ 13 #define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ 14 #define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ 15 #define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ 16 #define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ 17 #define BLIST_INQUIRY_36 0x400 /* override additional length field */ 18 #define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ 19 #define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ 20 #define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ 21 #define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ 22 #define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ 23 #define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ 24 #define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs 25 (if HBA supports more than 8 LUNs) */ 26 #define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ 27 #define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ 28 #define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ 29 #define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ 30 #define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ 31 #define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ 32 #define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ 33 #define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */ 34 #define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */ 35 #define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs 36 for sequential scan */ 37 #define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */ 38 #define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */ 39 40 #endif 41