1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_SCSI_DEVICE_H 3 #define _SCSI_SCSI_DEVICE_H 4 5 #include <linux/list.h> 6 #include <linux/spinlock.h> 7 #include <linux/workqueue.h> 8 #include <linux/blk-mq.h> 9 #include <scsi/scsi.h> 10 #include <linux/atomic.h> 11 #include <linux/sbitmap.h> 12 13 struct bsg_device; 14 struct device; 15 struct request_queue; 16 struct scsi_cmnd; 17 struct scsi_lun; 18 struct scsi_sense_hdr; 19 20 typedef __u64 __bitwise blist_flags_t; 21 22 #define SCSI_SENSE_BUFFERSIZE 96 23 24 struct scsi_mode_data { 25 __u32 length; 26 __u16 block_descriptor_length; 27 __u8 medium_type; 28 __u8 device_specific; 29 __u8 header_length; 30 __u8 longlba:1; 31 }; 32 33 /* 34 * sdev state: If you alter this, you also need to alter scsi_sysfs.c 35 * (for the ascii descriptions) and the state model enforcer: 36 * scsi_lib:scsi_device_set_state(). 37 */ 38 enum scsi_device_state { 39 SDEV_CREATED = 1, /* device created but not added to sysfs 40 * Only internal commands allowed (for inq) */ 41 SDEV_RUNNING, /* device properly configured 42 * All commands allowed */ 43 SDEV_CANCEL, /* beginning to delete device 44 * Only error handler commands allowed */ 45 SDEV_DEL, /* device deleted 46 * no commands allowed */ 47 SDEV_QUIESCE, /* Device quiescent. No block commands 48 * will be accepted, only specials (which 49 * originate in the mid-layer) */ 50 SDEV_OFFLINE, /* Device offlined (by error handling or 51 * user request */ 52 SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */ 53 SDEV_BLOCK, /* Device blocked by scsi lld. No 54 * scsi commands from user or midlayer 55 * should be issued to the scsi 56 * lld. */ 57 SDEV_CREATED_BLOCK, /* same as above but for created devices */ 58 }; 59 60 enum scsi_scan_mode { 61 SCSI_SCAN_INITIAL = 0, 62 SCSI_SCAN_RESCAN, 63 SCSI_SCAN_MANUAL, 64 }; 65 66 enum scsi_device_event { 67 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */ 68 SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */ 69 SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */ 70 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */ 71 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */ 72 SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */ 73 SDEV_EVT_ALUA_STATE_CHANGE_REPORTED, /* 2A 06 UA reported */ 74 SDEV_EVT_POWER_ON_RESET_OCCURRED, /* 29 00 UA reported */ 75 76 SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE, 77 SDEV_EVT_LAST = SDEV_EVT_POWER_ON_RESET_OCCURRED, 78 79 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1 80 }; 81 82 struct scsi_event { 83 enum scsi_device_event evt_type; 84 struct list_head node; 85 86 /* put union of data structures, for non-simple event types, 87 * here 88 */ 89 }; 90 91 /** 92 * struct scsi_vpd - SCSI Vital Product Data 93 * @rcu: For kfree_rcu(). 94 * @len: Length in bytes of @data. 95 * @data: VPD data as defined in various T10 SCSI standard documents. 96 */ 97 struct scsi_vpd { 98 struct rcu_head rcu; 99 int len; 100 unsigned char data[]; 101 }; 102 103 enum scsi_vpd_parameters { 104 SCSI_VPD_HEADER_SIZE = 4, 105 }; 106 107 struct scsi_device { 108 struct Scsi_Host *host; 109 struct request_queue *request_queue; 110 111 /* the next two are protected by the host->host_lock */ 112 struct list_head siblings; /* list of all devices on this host */ 113 struct list_head same_target_siblings; /* just the devices sharing same target id */ 114 115 struct sbitmap budget_map; 116 atomic_t device_blocked; /* Device returned QUEUE_FULL. */ 117 118 atomic_t restarts; 119 spinlock_t list_lock; 120 struct list_head starved_entry; 121 unsigned short queue_depth; /* How deep of a queue we want */ 122 unsigned short max_queue_depth; /* max queue depth */ 123 unsigned short last_queue_full_depth; /* These two are used by */ 124 unsigned short last_queue_full_count; /* scsi_track_queue_full() */ 125 unsigned long last_queue_full_time; /* last queue full time */ 126 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */ 127 #define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ) 128 129 unsigned long last_queue_ramp_up; /* last queue ramp up time */ 130 131 unsigned int id, channel; 132 u64 lun; 133 unsigned int manufacturer; /* Manufacturer of device, for using 134 * vendor-specific cmd's */ 135 unsigned sector_size; /* size in bytes */ 136 137 void *hostdata; /* available to low-level driver */ 138 unsigned char type; 139 char scsi_level; 140 char inq_periph_qual; /* PQ from INQUIRY data */ 141 struct mutex inquiry_mutex; 142 unsigned char inquiry_len; /* valid bytes in 'inquiry' */ 143 unsigned char * inquiry; /* INQUIRY response data */ 144 const char * vendor; /* [back_compat] point into 'inquiry' ... */ 145 const char * model; /* ... after scan; point to static string */ 146 const char * rev; /* ... "nullnullnullnull" before scan */ 147 148 #define SCSI_DEFAULT_VPD_LEN 255 /* default SCSI VPD page size (max) */ 149 struct scsi_vpd __rcu *vpd_pg0; 150 struct scsi_vpd __rcu *vpd_pg83; 151 struct scsi_vpd __rcu *vpd_pg80; 152 struct scsi_vpd __rcu *vpd_pg89; 153 struct scsi_vpd __rcu *vpd_pgb0; 154 struct scsi_vpd __rcu *vpd_pgb1; 155 struct scsi_vpd __rcu *vpd_pgb2; 156 157 struct scsi_target *sdev_target; 158 159 blist_flags_t sdev_bflags; /* black/white flags as also found in 160 * scsi_devinfo.[hc]. For now used only to 161 * pass settings from slave_alloc to scsi 162 * core. */ 163 unsigned int eh_timeout; /* Error handling timeout */ 164 165 /* 166 * If true, let the high-level device driver (sd) manage the device 167 * power state for system suspend/resume (suspend to RAM and 168 * hibernation) operations. 169 */ 170 unsigned manage_system_start_stop:1; 171 172 /* 173 * If true, let the high-level device driver (sd) manage the device 174 * power state for runtime device suspand and resume operations. 175 */ 176 unsigned manage_runtime_start_stop:1; 177 178 /* 179 * If true, let the high-level device driver (sd) manage the device 180 * power state for system shutdown (power off) operations. 181 */ 182 unsigned manage_shutdown:1; 183 184 /* 185 * If set and if the device is runtime suspended, ask the high-level 186 * device driver (sd) to force a runtime resume of the device. 187 */ 188 unsigned force_runtime_start_on_system_start:1; 189 190 unsigned removable:1; 191 unsigned changed:1; /* Data invalid due to media change */ 192 unsigned busy:1; /* Used to prevent races */ 193 unsigned lockable:1; /* Able to prevent media removal */ 194 unsigned locked:1; /* Media removal disabled */ 195 unsigned borken:1; /* Tell the Seagate driver to be 196 * painfully slow on this device */ 197 unsigned disconnect:1; /* can disconnect */ 198 unsigned soft_reset:1; /* Uses soft reset option */ 199 unsigned sdtr:1; /* Device supports SDTR messages */ 200 unsigned wdtr:1; /* Device supports WDTR messages */ 201 unsigned ppr:1; /* Device supports PPR messages */ 202 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */ 203 unsigned simple_tags:1; /* simple queue tag messages are enabled */ 204 unsigned was_reset:1; /* There was a bus reset on the bus for 205 * this device */ 206 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN 207 * because we did a bus reset. */ 208 unsigned use_10_for_rw:1; /* first try 10-byte read / write */ 209 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ 210 unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */ 211 unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ 212 unsigned no_write_same:1; /* no WRITE SAME command */ 213 unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */ 214 unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */ 215 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ 216 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ 217 unsigned skip_vpd_pages:1; /* do not read VPD pages */ 218 unsigned try_vpd_pages:1; /* attempt to read VPD pages */ 219 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */ 220 unsigned no_start_on_add:1; /* do not issue start on add */ 221 unsigned allow_restart:1; /* issue START_UNIT in error handler */ 222 unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */ 223 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */ 224 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */ 225 unsigned select_no_atn:1; 226 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ 227 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ 228 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ 229 unsigned last_sector_bug:1; /* do not use multisector accesses on 230 SD_LAST_BUGGY_SECTORS */ 231 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */ 232 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */ 233 unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */ 234 unsigned security_supported:1; /* Supports Security Protocols */ 235 unsigned is_visible:1; /* is the device visible in sysfs */ 236 unsigned wce_default_on:1; /* Cache is ON by default */ 237 unsigned no_dif:1; /* T10 PI (DIF) should be disabled */ 238 unsigned broken_fua:1; /* Don't set FUA bit */ 239 unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */ 240 unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */ 241 unsigned rpm_autosuspend:1; /* Enable runtime autosuspend at device 242 * creation time */ 243 unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */ 244 unsigned silence_suspend:1; /* Do not print runtime PM related messages */ 245 unsigned no_vpd_size:1; /* No VPD size reported in header */ 246 247 unsigned cdl_supported:1; /* Command duration limits supported */ 248 unsigned cdl_enable:1; /* Enable/disable Command duration limits */ 249 250 unsigned int queue_stopped; /* request queue is quiesced */ 251 bool offline_already; /* Device offline message logged */ 252 253 atomic_t disk_events_disable_depth; /* disable depth for disk events */ 254 255 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ 256 DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */ 257 struct list_head event_list; /* asserted events */ 258 struct work_struct event_work; 259 260 unsigned int max_device_blocked; /* what device_blocked counts down from */ 261 #define SCSI_DEFAULT_DEVICE_BLOCKED 3 262 263 atomic_t iorequest_cnt; 264 atomic_t iodone_cnt; 265 atomic_t ioerr_cnt; 266 atomic_t iotmo_cnt; 267 268 struct device sdev_gendev, 269 sdev_dev; 270 271 struct work_struct requeue_work; 272 273 struct scsi_device_handler *handler; 274 void *handler_data; 275 276 size_t dma_drain_len; 277 void *dma_drain_buf; 278 279 unsigned int sg_timeout; 280 unsigned int sg_reserved_size; 281 282 struct bsg_device *bsg_dev; 283 unsigned char access_state; 284 struct mutex state_mutex; 285 enum scsi_device_state sdev_state; 286 struct task_struct *quiesced_by; 287 unsigned long sdev_data[]; 288 } __attribute__((aligned(sizeof(unsigned long)))); 289 290 #define to_scsi_device(d) \ 291 container_of(d, struct scsi_device, sdev_gendev) 292 #define class_to_sdev(d) \ 293 container_of(d, struct scsi_device, sdev_dev) 294 #define transport_class_to_sdev(class_dev) \ 295 to_scsi_device(class_dev->parent) 296 297 #define sdev_dbg(sdev, fmt, a...) \ 298 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a) 299 300 /* 301 * like scmd_printk, but the device name is passed in 302 * as a string pointer 303 */ 304 __printf(4, 5) void 305 sdev_prefix_printk(const char *, const struct scsi_device *, const char *, 306 const char *, ...); 307 308 #define sdev_printk(l, sdev, fmt, a...) \ 309 sdev_prefix_printk(l, sdev, NULL, fmt, ##a) 310 311 __printf(3, 4) void 312 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...); 313 314 #define scmd_dbg(scmd, fmt, a...) \ 315 do { \ 316 struct request *__rq = scsi_cmd_to_rq((scmd)); \ 317 \ 318 if (__rq->q->disk) \ 319 sdev_dbg((scmd)->device, "[%s] " fmt, \ 320 __rq->q->disk->disk_name, ##a); \ 321 else \ 322 sdev_dbg((scmd)->device, fmt, ##a); \ 323 } while (0) 324 325 enum scsi_target_state { 326 STARGET_CREATED = 1, 327 STARGET_RUNNING, 328 STARGET_REMOVE, 329 STARGET_CREATED_REMOVE, 330 STARGET_DEL, 331 }; 332 333 /* 334 * scsi_target: representation of a scsi target, for now, this is only 335 * used for single_lun devices. If no one has active IO to the target, 336 * starget_sdev_user is NULL, else it points to the active sdev. 337 */ 338 struct scsi_target { 339 struct scsi_device *starget_sdev_user; 340 struct list_head siblings; 341 struct list_head devices; 342 struct device dev; 343 struct kref reap_ref; /* last put renders target invisible */ 344 unsigned int channel; 345 unsigned int id; /* target id ... replace 346 * scsi_device.id eventually */ 347 unsigned int create:1; /* signal that it needs to be added */ 348 unsigned int single_lun:1; /* Indicates we should only 349 * allow I/O to one of the luns 350 * for the device at a time. */ 351 unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f 352 * means no lun present. */ 353 unsigned int no_report_luns:1; /* Don't use 354 * REPORT LUNS for scanning. */ 355 unsigned int expecting_lun_change:1; /* A device has reported 356 * a 3F/0E UA, other devices on 357 * the same target will also. */ 358 /* commands actually active on LLD. */ 359 atomic_t target_busy; 360 atomic_t target_blocked; 361 362 /* 363 * LLDs should set this in the slave_alloc host template callout. 364 * If set to zero then there is not limit. 365 */ 366 unsigned int can_queue; 367 unsigned int max_target_blocked; 368 #define SCSI_DEFAULT_TARGET_BLOCKED 3 369 370 char scsi_level; 371 enum scsi_target_state state; 372 void *hostdata; /* available to low-level driver */ 373 unsigned long starget_data[]; /* for the transport */ 374 /* starget_data must be the last element!!!! */ 375 } __attribute__((aligned(sizeof(unsigned long)))); 376 377 #define to_scsi_target(d) container_of(d, struct scsi_target, dev) 378 static inline struct scsi_target *scsi_target(struct scsi_device *sdev) 379 { 380 return to_scsi_target(sdev->sdev_gendev.parent); 381 } 382 #define transport_class_to_starget(class_dev) \ 383 to_scsi_target(class_dev->parent) 384 385 #define starget_printk(prefix, starget, fmt, a...) \ 386 dev_printk(prefix, &(starget)->dev, fmt, ##a) 387 388 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *, 389 uint, uint, u64, void *hostdata); 390 extern int scsi_add_device(struct Scsi_Host *host, uint channel, 391 uint target, u64 lun); 392 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh); 393 extern void scsi_remove_device(struct scsi_device *); 394 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh); 395 void scsi_attach_vpd(struct scsi_device *sdev); 396 void scsi_cdl_check(struct scsi_device *sdev); 397 int scsi_cdl_enable(struct scsi_device *sdev, bool enable); 398 399 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q); 400 extern int __must_check scsi_device_get(struct scsi_device *); 401 extern void scsi_device_put(struct scsi_device *); 402 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *, 403 uint, uint, u64); 404 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *, 405 uint, uint, u64); 406 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *, 407 u64); 408 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *, 409 u64); 410 extern void starget_for_each_device(struct scsi_target *, void *, 411 void (*fn)(struct scsi_device *, void *)); 412 extern void __starget_for_each_device(struct scsi_target *, void *, 413 void (*fn)(struct scsi_device *, 414 void *)); 415 416 /* only exposed to implement shost_for_each_device */ 417 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, 418 struct scsi_device *); 419 420 /** 421 * shost_for_each_device - iterate over all devices of a host 422 * @sdev: the &struct scsi_device to use as a cursor 423 * @shost: the &struct scsi_host to iterate over 424 * 425 * Iterator that returns each device attached to @shost. This loop 426 * takes a reference on each device and releases it at the end. If 427 * you break out of the loop, you must call scsi_device_put(sdev). 428 */ 429 #define shost_for_each_device(sdev, shost) \ 430 for ((sdev) = __scsi_iterate_devices((shost), NULL); \ 431 (sdev); \ 432 (sdev) = __scsi_iterate_devices((shost), (sdev))) 433 434 /** 435 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED) 436 * @sdev: the &struct scsi_device to use as a cursor 437 * @shost: the &struct scsi_host to iterate over 438 * 439 * Iterator that returns each device attached to @shost. It does _not_ 440 * take a reference on the scsi_device, so the whole loop must be 441 * protected by shost->host_lock. 442 * 443 * Note: The only reason to use this is because you need to access the 444 * device list in interrupt context. Otherwise you really want to use 445 * shost_for_each_device instead. 446 */ 447 #define __shost_for_each_device(sdev, shost) \ 448 list_for_each_entry((sdev), &((shost)->__devices), siblings) 449 450 extern int scsi_change_queue_depth(struct scsi_device *, int); 451 extern int scsi_track_queue_full(struct scsi_device *, int); 452 453 extern int scsi_set_medium_removal(struct scsi_device *, char); 454 455 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, 456 int subpage, unsigned char *buffer, int len, int timeout, 457 int retries, struct scsi_mode_data *data, 458 struct scsi_sense_hdr *); 459 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, 460 unsigned char *buffer, int len, int timeout, 461 int retries, struct scsi_mode_data *data, 462 struct scsi_sense_hdr *); 463 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, 464 int retries, struct scsi_sense_hdr *sshdr); 465 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf, 466 int buf_len); 467 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, 468 unsigned int len, unsigned char opcode, 469 unsigned short sa); 470 extern int scsi_device_set_state(struct scsi_device *sdev, 471 enum scsi_device_state state); 472 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, 473 gfp_t gfpflags); 474 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt); 475 extern void sdev_evt_send_simple(struct scsi_device *sdev, 476 enum scsi_device_event evt_type, gfp_t gfpflags); 477 extern int scsi_device_quiesce(struct scsi_device *sdev); 478 extern void scsi_device_resume(struct scsi_device *sdev); 479 extern void scsi_target_quiesce(struct scsi_target *); 480 extern void scsi_target_resume(struct scsi_target *); 481 extern void scsi_scan_target(struct device *parent, unsigned int channel, 482 unsigned int id, u64 lun, 483 enum scsi_scan_mode rescan); 484 extern void scsi_target_reap(struct scsi_target *); 485 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev); 486 extern void scsi_target_unblock(struct device *, enum scsi_device_state); 487 extern void scsi_remove_target(struct device *); 488 extern const char *scsi_device_state_name(enum scsi_device_state); 489 extern int scsi_is_sdev_device(const struct device *); 490 extern int scsi_is_target_device(const struct device *); 491 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len); 492 493 /* Optional arguments to scsi_execute_cmd */ 494 struct scsi_exec_args { 495 unsigned char *sense; /* sense buffer */ 496 unsigned int sense_len; /* sense buffer len */ 497 struct scsi_sense_hdr *sshdr; /* decoded sense header */ 498 blk_mq_req_flags_t req_flags; /* BLK_MQ_REQ flags */ 499 int scmd_flags; /* SCMD flags */ 500 int *resid; /* residual length */ 501 }; 502 503 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd, 504 blk_opf_t opf, void *buffer, unsigned int bufflen, 505 int timeout, int retries, 506 const struct scsi_exec_args *args); 507 508 extern void sdev_disable_disk_events(struct scsi_device *sdev); 509 extern void sdev_enable_disk_events(struct scsi_device *sdev); 510 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t); 511 extern int scsi_vpd_tpg_id(struct scsi_device *, int *); 512 513 #ifdef CONFIG_PM 514 extern int scsi_autopm_get_device(struct scsi_device *); 515 extern void scsi_autopm_put_device(struct scsi_device *); 516 #else 517 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; } 518 static inline void scsi_autopm_put_device(struct scsi_device *d) {} 519 #endif /* CONFIG_PM */ 520 521 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev) 522 { 523 return device_reprobe(&sdev->sdev_gendev); 524 } 525 526 static inline unsigned int sdev_channel(struct scsi_device *sdev) 527 { 528 return sdev->channel; 529 } 530 531 static inline unsigned int sdev_id(struct scsi_device *sdev) 532 { 533 return sdev->id; 534 } 535 536 #define scmd_id(scmd) sdev_id((scmd)->device) 537 #define scmd_channel(scmd) sdev_channel((scmd)->device) 538 539 /* 540 * checks for positions of the SCSI state machine 541 */ 542 static inline int scsi_device_online(struct scsi_device *sdev) 543 { 544 return (sdev->sdev_state != SDEV_OFFLINE && 545 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE && 546 sdev->sdev_state != SDEV_DEL); 547 } 548 static inline int scsi_device_blocked(struct scsi_device *sdev) 549 { 550 return sdev->sdev_state == SDEV_BLOCK || 551 sdev->sdev_state == SDEV_CREATED_BLOCK; 552 } 553 static inline int scsi_device_created(struct scsi_device *sdev) 554 { 555 return sdev->sdev_state == SDEV_CREATED || 556 sdev->sdev_state == SDEV_CREATED_BLOCK; 557 } 558 559 int scsi_internal_device_block_nowait(struct scsi_device *sdev); 560 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev, 561 enum scsi_device_state new_state); 562 563 /* accessor functions for the SCSI parameters */ 564 static inline int scsi_device_sync(struct scsi_device *sdev) 565 { 566 return sdev->sdtr; 567 } 568 static inline int scsi_device_wide(struct scsi_device *sdev) 569 { 570 return sdev->wdtr; 571 } 572 static inline int scsi_device_dt(struct scsi_device *sdev) 573 { 574 return sdev->ppr; 575 } 576 static inline int scsi_device_dt_only(struct scsi_device *sdev) 577 { 578 if (sdev->inquiry_len < 57) 579 return 0; 580 return (sdev->inquiry[56] & 0x0c) == 0x04; 581 } 582 static inline int scsi_device_ius(struct scsi_device *sdev) 583 { 584 if (sdev->inquiry_len < 57) 585 return 0; 586 return sdev->inquiry[56] & 0x01; 587 } 588 static inline int scsi_device_qas(struct scsi_device *sdev) 589 { 590 if (sdev->inquiry_len < 57) 591 return 0; 592 return sdev->inquiry[56] & 0x02; 593 } 594 static inline int scsi_device_enclosure(struct scsi_device *sdev) 595 { 596 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1; 597 } 598 599 static inline int scsi_device_protection(struct scsi_device *sdev) 600 { 601 if (sdev->no_dif) 602 return 0; 603 604 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0); 605 } 606 607 static inline int scsi_device_tpgs(struct scsi_device *sdev) 608 { 609 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0; 610 } 611 612 /** 613 * scsi_device_supports_vpd - test if a device supports VPD pages 614 * @sdev: the &struct scsi_device to test 615 * 616 * If the 'try_vpd_pages' flag is set it takes precedence. 617 * Otherwise we will assume VPD pages are supported if the 618 * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set. 619 */ 620 static inline int scsi_device_supports_vpd(struct scsi_device *sdev) 621 { 622 /* Attempt VPD inquiry if the device blacklist explicitly calls 623 * for it. 624 */ 625 if (sdev->try_vpd_pages) 626 return 1; 627 /* 628 * Although VPD inquiries can go to SCSI-2 type devices, 629 * some USB ones crash on receiving them, and the pages 630 * we currently ask for are mandatory for SPC-2 and beyond 631 */ 632 if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages) 633 return 1; 634 return 0; 635 } 636 637 static inline int scsi_device_busy(struct scsi_device *sdev) 638 { 639 return sbitmap_weight(&sdev->budget_map); 640 } 641 642 #define MODULE_ALIAS_SCSI_DEVICE(type) \ 643 MODULE_ALIAS("scsi:t-" __stringify(type) "*") 644 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x" 645 646 #endif /* _SCSI_SCSI_DEVICE_H */ 647