xref: /openbmc/linux/include/scsi/scsi_device.h (revision 7288dd2f)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4 
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12 
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19 
20 typedef __u64 __bitwise blist_flags_t;
21 
22 #define SCSI_SENSE_BUFFERSIZE	96
23 
24 struct scsi_mode_data {
25 	__u32	length;
26 	__u16	block_descriptor_length;
27 	__u8	medium_type;
28 	__u8	device_specific;
29 	__u8	header_length;
30 	__u8	longlba:1;
31 };
32 
33 /*
34  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35  * (for the ascii descriptions) and the state model enforcer:
36  * scsi_lib:scsi_device_set_state().
37  */
38 enum scsi_device_state {
39 	SDEV_CREATED = 1,	/* device created but not added to sysfs
40 				 * Only internal commands allowed (for inq) */
41 	SDEV_RUNNING,		/* device properly configured
42 				 * All commands allowed */
43 	SDEV_CANCEL,		/* beginning to delete device
44 				 * Only error handler commands allowed */
45 	SDEV_DEL,		/* device deleted
46 				 * no commands allowed */
47 	SDEV_QUIESCE,		/* Device quiescent.  No block commands
48 				 * will be accepted, only specials (which
49 				 * originate in the mid-layer) */
50 	SDEV_OFFLINE,		/* Device offlined (by error handling or
51 				 * user request */
52 	SDEV_TRANSPORT_OFFLINE,	/* Offlined by transport class error handler */
53 	SDEV_BLOCK,		/* Device blocked by scsi lld.  No
54 				 * scsi commands from user or midlayer
55 				 * should be issued to the scsi
56 				 * lld. */
57 	SDEV_CREATED_BLOCK,	/* same as above but for created devices */
58 };
59 
60 enum scsi_scan_mode {
61 	SCSI_SCAN_INITIAL = 0,
62 	SCSI_SCAN_RESCAN,
63 	SCSI_SCAN_MANUAL,
64 };
65 
66 enum scsi_device_event {
67 	SDEV_EVT_MEDIA_CHANGE	= 1,	/* media has changed */
68 	SDEV_EVT_INQUIRY_CHANGE_REPORTED,		/* 3F 03  UA reported */
69 	SDEV_EVT_CAPACITY_CHANGE_REPORTED,		/* 2A 09  UA reported */
70 	SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,	/* 38 07  UA reported */
71 	SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,	/* 2A 01  UA reported */
72 	SDEV_EVT_LUN_CHANGE_REPORTED,			/* 3F 0E  UA reported */
73 	SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,		/* 2A 06  UA reported */
74 	SDEV_EVT_POWER_ON_RESET_OCCURRED,		/* 29 00  UA reported */
75 
76 	SDEV_EVT_FIRST		= SDEV_EVT_MEDIA_CHANGE,
77 	SDEV_EVT_LAST		= SDEV_EVT_POWER_ON_RESET_OCCURRED,
78 
79 	SDEV_EVT_MAXBITS	= SDEV_EVT_LAST + 1
80 };
81 
82 struct scsi_event {
83 	enum scsi_device_event	evt_type;
84 	struct list_head	node;
85 
86 	/* put union of data structures, for non-simple event types,
87 	 * here
88 	 */
89 };
90 
91 /**
92  * struct scsi_vpd - SCSI Vital Product Data
93  * @rcu: For kfree_rcu().
94  * @len: Length in bytes of @data.
95  * @data: VPD data as defined in various T10 SCSI standard documents.
96  */
97 struct scsi_vpd {
98 	struct rcu_head	rcu;
99 	int		len;
100 	unsigned char	data[];
101 };
102 
103 enum scsi_vpd_parameters {
104 	SCSI_VPD_HEADER_SIZE = 4,
105 };
106 
107 struct scsi_device {
108 	struct Scsi_Host *host;
109 	struct request_queue *request_queue;
110 
111 	/* the next two are protected by the host->host_lock */
112 	struct list_head    siblings;   /* list of all devices on this host */
113 	struct list_head    same_target_siblings; /* just the devices sharing same target id */
114 
115 	struct sbitmap budget_map;
116 	atomic_t device_blocked;	/* Device returned QUEUE_FULL. */
117 
118 	atomic_t restarts;
119 	spinlock_t list_lock;
120 	struct list_head starved_entry;
121 	unsigned short queue_depth;	/* How deep of a queue we want */
122 	unsigned short max_queue_depth;	/* max queue depth */
123 	unsigned short last_queue_full_depth; /* These two are used by */
124 	unsigned short last_queue_full_count; /* scsi_track_queue_full() */
125 	unsigned long last_queue_full_time;	/* last queue full time */
126 	unsigned long queue_ramp_up_period;	/* ramp up period in jiffies */
127 #define SCSI_DEFAULT_RAMP_UP_PERIOD	(120 * HZ)
128 
129 	unsigned long last_queue_ramp_up;	/* last queue ramp up time */
130 
131 	unsigned int id, channel;
132 	u64 lun;
133 	unsigned int manufacturer;	/* Manufacturer of device, for using
134 					 * vendor-specific cmd's */
135 	unsigned sector_size;	/* size in bytes */
136 
137 	void *hostdata;		/* available to low-level driver */
138 	unsigned char type;
139 	char scsi_level;
140 	char inq_periph_qual;	/* PQ from INQUIRY data */
141 	struct mutex inquiry_mutex;
142 	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
143 	unsigned char * inquiry;	/* INQUIRY response data */
144 	const char * vendor;		/* [back_compat] point into 'inquiry' ... */
145 	const char * model;		/* ... after scan; point to static string */
146 	const char * rev;		/* ... "nullnullnullnull" before scan */
147 
148 #define SCSI_DEFAULT_VPD_LEN	255	/* default SCSI VPD page size (max) */
149 	struct scsi_vpd __rcu *vpd_pg0;
150 	struct scsi_vpd __rcu *vpd_pg83;
151 	struct scsi_vpd __rcu *vpd_pg80;
152 	struct scsi_vpd __rcu *vpd_pg89;
153 	struct scsi_vpd __rcu *vpd_pgb0;
154 	struct scsi_vpd __rcu *vpd_pgb1;
155 	struct scsi_vpd __rcu *vpd_pgb2;
156 
157 	struct scsi_target      *sdev_target;
158 
159 	blist_flags_t		sdev_bflags; /* black/white flags as also found in
160 				 * scsi_devinfo.[hc]. For now used only to
161 				 * pass settings from slave_alloc to scsi
162 				 * core. */
163 	unsigned int eh_timeout; /* Error handling timeout */
164 	unsigned removable:1;
165 	unsigned changed:1;	/* Data invalid due to media change */
166 	unsigned busy:1;	/* Used to prevent races */
167 	unsigned lockable:1;	/* Able to prevent media removal */
168 	unsigned locked:1;      /* Media removal disabled */
169 	unsigned borken:1;	/* Tell the Seagate driver to be
170 				 * painfully slow on this device */
171 	unsigned disconnect:1;	/* can disconnect */
172 	unsigned soft_reset:1;	/* Uses soft reset option */
173 	unsigned sdtr:1;	/* Device supports SDTR messages */
174 	unsigned wdtr:1;	/* Device supports WDTR messages */
175 	unsigned ppr:1;		/* Device supports PPR messages */
176 	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
177 	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
178 	unsigned was_reset:1;	/* There was a bus reset on the bus for
179 				 * this device */
180 	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
181 				     * because we did a bus reset. */
182 	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
183 	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
184 	unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
185 	unsigned no_report_opcodes:1;	/* no REPORT SUPPORTED OPERATION CODES */
186 	unsigned no_write_same:1;	/* no WRITE SAME command */
187 	unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
188 	unsigned use_16_for_sync:1;	/* Use sync (16) over sync (10) */
189 	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
190 	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
191 	unsigned skip_vpd_pages:1;	/* do not read VPD pages */
192 	unsigned try_vpd_pages:1;	/* attempt to read VPD pages */
193 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
194 	unsigned no_start_on_add:1;	/* do not issue start on add */
195 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
196 	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
197 	unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
198 	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
199 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
200 	unsigned select_no_atn:1;
201 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
202 	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
203 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
204 	unsigned last_sector_bug:1;	/* do not use multisector accesses on
205 					   SD_LAST_BUGGY_SECTORS */
206 	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
207 	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
208 	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
209 	unsigned security_supported:1;	/* Supports Security Protocols */
210 	unsigned is_visible:1;	/* is the device visible in sysfs */
211 	unsigned wce_default_on:1;	/* Cache is ON by default */
212 	unsigned no_dif:1;	/* T10 PI (DIF) should be disabled */
213 	unsigned broken_fua:1;		/* Don't set FUA bit */
214 	unsigned lun_in_cdb:1;		/* Store LUN bits in CDB[1] */
215 	unsigned unmap_limit_for_ws:1;	/* Use the UNMAP limit for WRITE SAME */
216 	unsigned rpm_autosuspend:1;	/* Enable runtime autosuspend at device
217 					 * creation time */
218 	unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
219 	unsigned silence_suspend:1;	/* Do not print runtime PM related messages */
220 	unsigned no_vpd_size:1;		/* No VPD size reported in header */
221 
222 	unsigned cdl_supported:1;	/* Command duration limits supported */
223 	unsigned cdl_enable:1;		/* Enable/disable Command duration limits */
224 
225 	unsigned int queue_stopped;	/* request queue is quiesced */
226 	bool offline_already;		/* Device offline message logged */
227 
228 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
229 
230 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
231 	DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
232 	struct list_head event_list;	/* asserted events */
233 	struct work_struct event_work;
234 
235 	unsigned int max_device_blocked; /* what device_blocked counts down from  */
236 #define SCSI_DEFAULT_DEVICE_BLOCKED	3
237 
238 	atomic_t iorequest_cnt;
239 	atomic_t iodone_cnt;
240 	atomic_t ioerr_cnt;
241 	atomic_t iotmo_cnt;
242 
243 	struct device		sdev_gendev,
244 				sdev_dev;
245 
246 	struct work_struct	requeue_work;
247 
248 	struct scsi_device_handler *handler;
249 	void			*handler_data;
250 
251 	size_t			dma_drain_len;
252 	void			*dma_drain_buf;
253 
254 	unsigned int		sg_timeout;
255 	unsigned int		sg_reserved_size;
256 
257 	struct bsg_device	*bsg_dev;
258 	unsigned char		access_state;
259 	struct mutex		state_mutex;
260 	enum scsi_device_state sdev_state;
261 	struct task_struct	*quiesced_by;
262 	unsigned long		sdev_data[];
263 } __attribute__((aligned(sizeof(unsigned long))));
264 
265 #define	to_scsi_device(d)	\
266 	container_of(d, struct scsi_device, sdev_gendev)
267 #define	class_to_sdev(d)	\
268 	container_of(d, struct scsi_device, sdev_dev)
269 #define transport_class_to_sdev(class_dev) \
270 	to_scsi_device(class_dev->parent)
271 
272 #define sdev_dbg(sdev, fmt, a...) \
273 	dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
274 
275 /*
276  * like scmd_printk, but the device name is passed in
277  * as a string pointer
278  */
279 __printf(4, 5) void
280 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
281 		const char *, ...);
282 
283 #define sdev_printk(l, sdev, fmt, a...)				\
284 	sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
285 
286 __printf(3, 4) void
287 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
288 
289 #define scmd_dbg(scmd, fmt, a...)					\
290 	do {								\
291 		struct request *__rq = scsi_cmd_to_rq((scmd));		\
292 									\
293 		if (__rq->q->disk)					\
294 			sdev_dbg((scmd)->device, "[%s] " fmt,		\
295 				 __rq->q->disk->disk_name, ##a);	\
296 		else							\
297 			sdev_dbg((scmd)->device, fmt, ##a);		\
298 	} while (0)
299 
300 enum scsi_target_state {
301 	STARGET_CREATED = 1,
302 	STARGET_RUNNING,
303 	STARGET_REMOVE,
304 	STARGET_CREATED_REMOVE,
305 	STARGET_DEL,
306 };
307 
308 /*
309  * scsi_target: representation of a scsi target, for now, this is only
310  * used for single_lun devices. If no one has active IO to the target,
311  * starget_sdev_user is NULL, else it points to the active sdev.
312  */
313 struct scsi_target {
314 	struct scsi_device	*starget_sdev_user;
315 	struct list_head	siblings;
316 	struct list_head	devices;
317 	struct device		dev;
318 	struct kref		reap_ref; /* last put renders target invisible */
319 	unsigned int		channel;
320 	unsigned int		id; /* target id ... replace
321 				     * scsi_device.id eventually */
322 	unsigned int		create:1; /* signal that it needs to be added */
323 	unsigned int		single_lun:1;	/* Indicates we should only
324 						 * allow I/O to one of the luns
325 						 * for the device at a time. */
326 	unsigned int		pdt_1f_for_no_lun:1;	/* PDT = 0x1f
327 						 * means no lun present. */
328 	unsigned int		no_report_luns:1;	/* Don't use
329 						 * REPORT LUNS for scanning. */
330 	unsigned int		expecting_lun_change:1;	/* A device has reported
331 						 * a 3F/0E UA, other devices on
332 						 * the same target will also. */
333 	/* commands actually active on LLD. */
334 	atomic_t		target_busy;
335 	atomic_t		target_blocked;
336 
337 	/*
338 	 * LLDs should set this in the slave_alloc host template callout.
339 	 * If set to zero then there is not limit.
340 	 */
341 	unsigned int		can_queue;
342 	unsigned int		max_target_blocked;
343 #define SCSI_DEFAULT_TARGET_BLOCKED	3
344 
345 	char			scsi_level;
346 	enum scsi_target_state	state;
347 	void 			*hostdata; /* available to low-level driver */
348 	unsigned long		starget_data[]; /* for the transport */
349 	/* starget_data must be the last element!!!! */
350 } __attribute__((aligned(sizeof(unsigned long))));
351 
352 #define to_scsi_target(d)	container_of(d, struct scsi_target, dev)
353 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
354 {
355 	return to_scsi_target(sdev->sdev_gendev.parent);
356 }
357 #define transport_class_to_starget(class_dev) \
358 	to_scsi_target(class_dev->parent)
359 
360 #define starget_printk(prefix, starget, fmt, a...)	\
361 	dev_printk(prefix, &(starget)->dev, fmt, ##a)
362 
363 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
364 		uint, uint, u64, void *hostdata);
365 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
366 			   uint target, u64 lun);
367 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
368 extern void scsi_remove_device(struct scsi_device *);
369 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
370 void scsi_attach_vpd(struct scsi_device *sdev);
371 void scsi_cdl_check(struct scsi_device *sdev);
372 int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
373 
374 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
375 extern int __must_check scsi_device_get(struct scsi_device *);
376 extern void scsi_device_put(struct scsi_device *);
377 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
378 					      uint, uint, u64);
379 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
380 						uint, uint, u64);
381 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
382 							u64);
383 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
384 							  u64);
385 extern void starget_for_each_device(struct scsi_target *, void *,
386 		     void (*fn)(struct scsi_device *, void *));
387 extern void __starget_for_each_device(struct scsi_target *, void *,
388 				      void (*fn)(struct scsi_device *,
389 						 void *));
390 
391 /* only exposed to implement shost_for_each_device */
392 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
393 						  struct scsi_device *);
394 
395 /**
396  * shost_for_each_device - iterate over all devices of a host
397  * @sdev: the &struct scsi_device to use as a cursor
398  * @shost: the &struct scsi_host to iterate over
399  *
400  * Iterator that returns each device attached to @shost.  This loop
401  * takes a reference on each device and releases it at the end.  If
402  * you break out of the loop, you must call scsi_device_put(sdev).
403  */
404 #define shost_for_each_device(sdev, shost) \
405 	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
406 	     (sdev); \
407 	     (sdev) = __scsi_iterate_devices((shost), (sdev)))
408 
409 /**
410  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
411  * @sdev: the &struct scsi_device to use as a cursor
412  * @shost: the &struct scsi_host to iterate over
413  *
414  * Iterator that returns each device attached to @shost.  It does _not_
415  * take a reference on the scsi_device, so the whole loop must be
416  * protected by shost->host_lock.
417  *
418  * Note: The only reason to use this is because you need to access the
419  * device list in interrupt context.  Otherwise you really want to use
420  * shost_for_each_device instead.
421  */
422 #define __shost_for_each_device(sdev, shost) \
423 	list_for_each_entry((sdev), &((shost)->__devices), siblings)
424 
425 extern int scsi_change_queue_depth(struct scsi_device *, int);
426 extern int scsi_track_queue_full(struct scsi_device *, int);
427 
428 extern int scsi_set_medium_removal(struct scsi_device *, char);
429 
430 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
431 		    int subpage, unsigned char *buffer, int len, int timeout,
432 		    int retries, struct scsi_mode_data *data,
433 		    struct scsi_sense_hdr *);
434 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
435 			    unsigned char *buffer, int len, int timeout,
436 			    int retries, struct scsi_mode_data *data,
437 			    struct scsi_sense_hdr *);
438 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
439 				int retries, struct scsi_sense_hdr *sshdr);
440 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
441 			     int buf_len);
442 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
443 		       unsigned int len, unsigned char opcode,
444 		       unsigned short sa);
445 extern int scsi_device_set_state(struct scsi_device *sdev,
446 				 enum scsi_device_state state);
447 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
448 					  gfp_t gfpflags);
449 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
450 extern void sdev_evt_send_simple(struct scsi_device *sdev,
451 			  enum scsi_device_event evt_type, gfp_t gfpflags);
452 extern int scsi_device_quiesce(struct scsi_device *sdev);
453 extern void scsi_device_resume(struct scsi_device *sdev);
454 extern void scsi_target_quiesce(struct scsi_target *);
455 extern void scsi_target_resume(struct scsi_target *);
456 extern void scsi_scan_target(struct device *parent, unsigned int channel,
457 			     unsigned int id, u64 lun,
458 			     enum scsi_scan_mode rescan);
459 extern void scsi_target_reap(struct scsi_target *);
460 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev);
461 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
462 extern void scsi_remove_target(struct device *);
463 extern const char *scsi_device_state_name(enum scsi_device_state);
464 extern int scsi_is_sdev_device(const struct device *);
465 extern int scsi_is_target_device(const struct device *);
466 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
467 
468 /* Optional arguments to scsi_execute_cmd */
469 struct scsi_exec_args {
470 	unsigned char *sense;		/* sense buffer */
471 	unsigned int sense_len;		/* sense buffer len */
472 	struct scsi_sense_hdr *sshdr;	/* decoded sense header */
473 	blk_mq_req_flags_t req_flags;	/* BLK_MQ_REQ flags */
474 	int scmd_flags;			/* SCMD flags */
475 	int *resid;			/* residual length */
476 };
477 
478 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
479 		     blk_opf_t opf, void *buffer, unsigned int bufflen,
480 		     int timeout, int retries,
481 		     const struct scsi_exec_args *args);
482 
483 extern void sdev_disable_disk_events(struct scsi_device *sdev);
484 extern void sdev_enable_disk_events(struct scsi_device *sdev);
485 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
486 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
487 
488 #ifdef CONFIG_PM
489 extern int scsi_autopm_get_device(struct scsi_device *);
490 extern void scsi_autopm_put_device(struct scsi_device *);
491 #else
492 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
493 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
494 #endif /* CONFIG_PM */
495 
496 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
497 {
498 	return device_reprobe(&sdev->sdev_gendev);
499 }
500 
501 static inline unsigned int sdev_channel(struct scsi_device *sdev)
502 {
503 	return sdev->channel;
504 }
505 
506 static inline unsigned int sdev_id(struct scsi_device *sdev)
507 {
508 	return sdev->id;
509 }
510 
511 #define scmd_id(scmd) sdev_id((scmd)->device)
512 #define scmd_channel(scmd) sdev_channel((scmd)->device)
513 
514 /*
515  * checks for positions of the SCSI state machine
516  */
517 static inline int scsi_device_online(struct scsi_device *sdev)
518 {
519 	return (sdev->sdev_state != SDEV_OFFLINE &&
520 		sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
521 		sdev->sdev_state != SDEV_DEL);
522 }
523 static inline int scsi_device_blocked(struct scsi_device *sdev)
524 {
525 	return sdev->sdev_state == SDEV_BLOCK ||
526 		sdev->sdev_state == SDEV_CREATED_BLOCK;
527 }
528 static inline int scsi_device_created(struct scsi_device *sdev)
529 {
530 	return sdev->sdev_state == SDEV_CREATED ||
531 		sdev->sdev_state == SDEV_CREATED_BLOCK;
532 }
533 
534 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
535 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
536 					enum scsi_device_state new_state);
537 
538 /* accessor functions for the SCSI parameters */
539 static inline int scsi_device_sync(struct scsi_device *sdev)
540 {
541 	return sdev->sdtr;
542 }
543 static inline int scsi_device_wide(struct scsi_device *sdev)
544 {
545 	return sdev->wdtr;
546 }
547 static inline int scsi_device_dt(struct scsi_device *sdev)
548 {
549 	return sdev->ppr;
550 }
551 static inline int scsi_device_dt_only(struct scsi_device *sdev)
552 {
553 	if (sdev->inquiry_len < 57)
554 		return 0;
555 	return (sdev->inquiry[56] & 0x0c) == 0x04;
556 }
557 static inline int scsi_device_ius(struct scsi_device *sdev)
558 {
559 	if (sdev->inquiry_len < 57)
560 		return 0;
561 	return sdev->inquiry[56] & 0x01;
562 }
563 static inline int scsi_device_qas(struct scsi_device *sdev)
564 {
565 	if (sdev->inquiry_len < 57)
566 		return 0;
567 	return sdev->inquiry[56] & 0x02;
568 }
569 static inline int scsi_device_enclosure(struct scsi_device *sdev)
570 {
571 	return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
572 }
573 
574 static inline int scsi_device_protection(struct scsi_device *sdev)
575 {
576 	if (sdev->no_dif)
577 		return 0;
578 
579 	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
580 }
581 
582 static inline int scsi_device_tpgs(struct scsi_device *sdev)
583 {
584 	return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
585 }
586 
587 /**
588  * scsi_device_supports_vpd - test if a device supports VPD pages
589  * @sdev: the &struct scsi_device to test
590  *
591  * If the 'try_vpd_pages' flag is set it takes precedence.
592  * Otherwise we will assume VPD pages are supported if the
593  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
594  */
595 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
596 {
597 	/* Attempt VPD inquiry if the device blacklist explicitly calls
598 	 * for it.
599 	 */
600 	if (sdev->try_vpd_pages)
601 		return 1;
602 	/*
603 	 * Although VPD inquiries can go to SCSI-2 type devices,
604 	 * some USB ones crash on receiving them, and the pages
605 	 * we currently ask for are mandatory for SPC-2 and beyond
606 	 */
607 	if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
608 		return 1;
609 	return 0;
610 }
611 
612 static inline int scsi_device_busy(struct scsi_device *sdev)
613 {
614 	return sbitmap_weight(&sdev->budget_map);
615 }
616 
617 #define MODULE_ALIAS_SCSI_DEVICE(type) \
618 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
619 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
620 
621 #endif /* _SCSI_SCSI_DEVICE_H */
622