1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_SCSI_DEVICE_H 3 #define _SCSI_SCSI_DEVICE_H 4 5 #include <linux/list.h> 6 #include <linux/spinlock.h> 7 #include <linux/workqueue.h> 8 #include <linux/blk-mq.h> 9 #include <scsi/scsi.h> 10 #include <linux/atomic.h> 11 #include <linux/sbitmap.h> 12 13 struct bsg_device; 14 struct device; 15 struct request_queue; 16 struct scsi_cmnd; 17 struct scsi_lun; 18 struct scsi_sense_hdr; 19 20 typedef __u64 __bitwise blist_flags_t; 21 22 #define SCSI_SENSE_BUFFERSIZE 96 23 24 struct scsi_mode_data { 25 __u32 length; 26 __u16 block_descriptor_length; 27 __u8 medium_type; 28 __u8 device_specific; 29 __u8 header_length; 30 __u8 longlba:1; 31 }; 32 33 /* 34 * sdev state: If you alter this, you also need to alter scsi_sysfs.c 35 * (for the ascii descriptions) and the state model enforcer: 36 * scsi_lib:scsi_device_set_state(). 37 */ 38 enum scsi_device_state { 39 SDEV_CREATED = 1, /* device created but not added to sysfs 40 * Only internal commands allowed (for inq) */ 41 SDEV_RUNNING, /* device properly configured 42 * All commands allowed */ 43 SDEV_CANCEL, /* beginning to delete device 44 * Only error handler commands allowed */ 45 SDEV_DEL, /* device deleted 46 * no commands allowed */ 47 SDEV_QUIESCE, /* Device quiescent. No block commands 48 * will be accepted, only specials (which 49 * originate in the mid-layer) */ 50 SDEV_OFFLINE, /* Device offlined (by error handling or 51 * user request */ 52 SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */ 53 SDEV_BLOCK, /* Device blocked by scsi lld. No 54 * scsi commands from user or midlayer 55 * should be issued to the scsi 56 * lld. */ 57 SDEV_CREATED_BLOCK, /* same as above but for created devices */ 58 }; 59 60 enum scsi_scan_mode { 61 SCSI_SCAN_INITIAL = 0, 62 SCSI_SCAN_RESCAN, 63 SCSI_SCAN_MANUAL, 64 }; 65 66 enum scsi_device_event { 67 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */ 68 SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */ 69 SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */ 70 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */ 71 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */ 72 SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */ 73 SDEV_EVT_ALUA_STATE_CHANGE_REPORTED, /* 2A 06 UA reported */ 74 SDEV_EVT_POWER_ON_RESET_OCCURRED, /* 29 00 UA reported */ 75 76 SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE, 77 SDEV_EVT_LAST = SDEV_EVT_POWER_ON_RESET_OCCURRED, 78 79 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1 80 }; 81 82 struct scsi_event { 83 enum scsi_device_event evt_type; 84 struct list_head node; 85 86 /* put union of data structures, for non-simple event types, 87 * here 88 */ 89 }; 90 91 /** 92 * struct scsi_vpd - SCSI Vital Product Data 93 * @rcu: For kfree_rcu(). 94 * @len: Length in bytes of @data. 95 * @data: VPD data as defined in various T10 SCSI standard documents. 96 */ 97 struct scsi_vpd { 98 struct rcu_head rcu; 99 int len; 100 unsigned char data[]; 101 }; 102 103 enum scsi_vpd_parameters { 104 SCSI_VPD_HEADER_SIZE = 4, 105 }; 106 107 struct scsi_device { 108 struct Scsi_Host *host; 109 struct request_queue *request_queue; 110 111 /* the next two are protected by the host->host_lock */ 112 struct list_head siblings; /* list of all devices on this host */ 113 struct list_head same_target_siblings; /* just the devices sharing same target id */ 114 115 struct sbitmap budget_map; 116 atomic_t device_blocked; /* Device returned QUEUE_FULL. */ 117 118 atomic_t restarts; 119 spinlock_t list_lock; 120 struct list_head starved_entry; 121 unsigned short queue_depth; /* How deep of a queue we want */ 122 unsigned short max_queue_depth; /* max queue depth */ 123 unsigned short last_queue_full_depth; /* These two are used by */ 124 unsigned short last_queue_full_count; /* scsi_track_queue_full() */ 125 unsigned long last_queue_full_time; /* last queue full time */ 126 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */ 127 #define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ) 128 129 unsigned long last_queue_ramp_up; /* last queue ramp up time */ 130 131 unsigned int id, channel; 132 u64 lun; 133 unsigned int manufacturer; /* Manufacturer of device, for using 134 * vendor-specific cmd's */ 135 unsigned sector_size; /* size in bytes */ 136 137 void *hostdata; /* available to low-level driver */ 138 unsigned char type; 139 char scsi_level; 140 char inq_periph_qual; /* PQ from INQUIRY data */ 141 struct mutex inquiry_mutex; 142 unsigned char inquiry_len; /* valid bytes in 'inquiry' */ 143 unsigned char * inquiry; /* INQUIRY response data */ 144 const char * vendor; /* [back_compat] point into 'inquiry' ... */ 145 const char * model; /* ... after scan; point to static string */ 146 const char * rev; /* ... "nullnullnullnull" before scan */ 147 148 #define SCSI_DEFAULT_VPD_LEN 255 /* default SCSI VPD page size (max) */ 149 struct scsi_vpd __rcu *vpd_pg0; 150 struct scsi_vpd __rcu *vpd_pg83; 151 struct scsi_vpd __rcu *vpd_pg80; 152 struct scsi_vpd __rcu *vpd_pg89; 153 struct scsi_vpd __rcu *vpd_pgb0; 154 struct scsi_vpd __rcu *vpd_pgb1; 155 struct scsi_vpd __rcu *vpd_pgb2; 156 157 struct scsi_target *sdev_target; 158 159 blist_flags_t sdev_bflags; /* black/white flags as also found in 160 * scsi_devinfo.[hc]. For now used only to 161 * pass settings from slave_alloc to scsi 162 * core. */ 163 unsigned int eh_timeout; /* Error handling timeout */ 164 165 /* 166 * If true, let the high-level device driver (sd) manage the device 167 * power state for system suspend/resume (suspend to RAM and 168 * hibernation) operations. 169 */ 170 bool manage_system_start_stop; 171 172 /* 173 * If true, let the high-level device driver (sd) manage the device 174 * power state for runtime device suspand and resume operations. 175 */ 176 bool manage_runtime_start_stop; 177 178 /* 179 * If true, let the high-level device driver (sd) manage the device 180 * power state for system shutdown (power off) operations. 181 */ 182 bool manage_shutdown; 183 184 unsigned removable:1; 185 unsigned changed:1; /* Data invalid due to media change */ 186 unsigned busy:1; /* Used to prevent races */ 187 unsigned lockable:1; /* Able to prevent media removal */ 188 unsigned locked:1; /* Media removal disabled */ 189 unsigned borken:1; /* Tell the Seagate driver to be 190 * painfully slow on this device */ 191 unsigned disconnect:1; /* can disconnect */ 192 unsigned soft_reset:1; /* Uses soft reset option */ 193 unsigned sdtr:1; /* Device supports SDTR messages */ 194 unsigned wdtr:1; /* Device supports WDTR messages */ 195 unsigned ppr:1; /* Device supports PPR messages */ 196 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */ 197 unsigned simple_tags:1; /* simple queue tag messages are enabled */ 198 unsigned was_reset:1; /* There was a bus reset on the bus for 199 * this device */ 200 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN 201 * because we did a bus reset. */ 202 unsigned use_10_for_rw:1; /* first try 10-byte read / write */ 203 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ 204 unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */ 205 unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ 206 unsigned no_write_same:1; /* no WRITE SAME command */ 207 unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */ 208 unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */ 209 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ 210 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ 211 unsigned skip_vpd_pages:1; /* do not read VPD pages */ 212 unsigned try_vpd_pages:1; /* attempt to read VPD pages */ 213 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */ 214 unsigned no_start_on_add:1; /* do not issue start on add */ 215 unsigned allow_restart:1; /* issue START_UNIT in error handler */ 216 unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */ 217 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */ 218 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */ 219 unsigned select_no_atn:1; 220 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ 221 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ 222 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ 223 unsigned last_sector_bug:1; /* do not use multisector accesses on 224 SD_LAST_BUGGY_SECTORS */ 225 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */ 226 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */ 227 unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */ 228 unsigned security_supported:1; /* Supports Security Protocols */ 229 unsigned is_visible:1; /* is the device visible in sysfs */ 230 unsigned wce_default_on:1; /* Cache is ON by default */ 231 unsigned no_dif:1; /* T10 PI (DIF) should be disabled */ 232 unsigned broken_fua:1; /* Don't set FUA bit */ 233 unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */ 234 unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */ 235 unsigned rpm_autosuspend:1; /* Enable runtime autosuspend at device 236 * creation time */ 237 unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */ 238 unsigned silence_suspend:1; /* Do not print runtime PM related messages */ 239 unsigned no_vpd_size:1; /* No VPD size reported in header */ 240 241 unsigned cdl_supported:1; /* Command duration limits supported */ 242 unsigned cdl_enable:1; /* Enable/disable Command duration limits */ 243 244 unsigned int queue_stopped; /* request queue is quiesced */ 245 bool offline_already; /* Device offline message logged */ 246 247 atomic_t disk_events_disable_depth; /* disable depth for disk events */ 248 249 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ 250 DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */ 251 struct list_head event_list; /* asserted events */ 252 struct work_struct event_work; 253 254 unsigned int max_device_blocked; /* what device_blocked counts down from */ 255 #define SCSI_DEFAULT_DEVICE_BLOCKED 3 256 257 atomic_t iorequest_cnt; 258 atomic_t iodone_cnt; 259 atomic_t ioerr_cnt; 260 atomic_t iotmo_cnt; 261 262 struct device sdev_gendev, 263 sdev_dev; 264 265 struct work_struct requeue_work; 266 267 struct scsi_device_handler *handler; 268 void *handler_data; 269 270 size_t dma_drain_len; 271 void *dma_drain_buf; 272 273 unsigned int sg_timeout; 274 unsigned int sg_reserved_size; 275 276 struct bsg_device *bsg_dev; 277 unsigned char access_state; 278 struct mutex state_mutex; 279 enum scsi_device_state sdev_state; 280 struct task_struct *quiesced_by; 281 unsigned long sdev_data[]; 282 } __attribute__((aligned(sizeof(unsigned long)))); 283 284 #define to_scsi_device(d) \ 285 container_of(d, struct scsi_device, sdev_gendev) 286 #define class_to_sdev(d) \ 287 container_of(d, struct scsi_device, sdev_dev) 288 #define transport_class_to_sdev(class_dev) \ 289 to_scsi_device(class_dev->parent) 290 291 #define sdev_dbg(sdev, fmt, a...) \ 292 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a) 293 294 /* 295 * like scmd_printk, but the device name is passed in 296 * as a string pointer 297 */ 298 __printf(4, 5) void 299 sdev_prefix_printk(const char *, const struct scsi_device *, const char *, 300 const char *, ...); 301 302 #define sdev_printk(l, sdev, fmt, a...) \ 303 sdev_prefix_printk(l, sdev, NULL, fmt, ##a) 304 305 __printf(3, 4) void 306 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...); 307 308 #define scmd_dbg(scmd, fmt, a...) \ 309 do { \ 310 struct request *__rq = scsi_cmd_to_rq((scmd)); \ 311 \ 312 if (__rq->q->disk) \ 313 sdev_dbg((scmd)->device, "[%s] " fmt, \ 314 __rq->q->disk->disk_name, ##a); \ 315 else \ 316 sdev_dbg((scmd)->device, fmt, ##a); \ 317 } while (0) 318 319 enum scsi_target_state { 320 STARGET_CREATED = 1, 321 STARGET_RUNNING, 322 STARGET_REMOVE, 323 STARGET_CREATED_REMOVE, 324 STARGET_DEL, 325 }; 326 327 /* 328 * scsi_target: representation of a scsi target, for now, this is only 329 * used for single_lun devices. If no one has active IO to the target, 330 * starget_sdev_user is NULL, else it points to the active sdev. 331 */ 332 struct scsi_target { 333 struct scsi_device *starget_sdev_user; 334 struct list_head siblings; 335 struct list_head devices; 336 struct device dev; 337 struct kref reap_ref; /* last put renders target invisible */ 338 unsigned int channel; 339 unsigned int id; /* target id ... replace 340 * scsi_device.id eventually */ 341 unsigned int create:1; /* signal that it needs to be added */ 342 unsigned int single_lun:1; /* Indicates we should only 343 * allow I/O to one of the luns 344 * for the device at a time. */ 345 unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f 346 * means no lun present. */ 347 unsigned int no_report_luns:1; /* Don't use 348 * REPORT LUNS for scanning. */ 349 unsigned int expecting_lun_change:1; /* A device has reported 350 * a 3F/0E UA, other devices on 351 * the same target will also. */ 352 /* commands actually active on LLD. */ 353 atomic_t target_busy; 354 atomic_t target_blocked; 355 356 /* 357 * LLDs should set this in the slave_alloc host template callout. 358 * If set to zero then there is not limit. 359 */ 360 unsigned int can_queue; 361 unsigned int max_target_blocked; 362 #define SCSI_DEFAULT_TARGET_BLOCKED 3 363 364 char scsi_level; 365 enum scsi_target_state state; 366 void *hostdata; /* available to low-level driver */ 367 unsigned long starget_data[]; /* for the transport */ 368 /* starget_data must be the last element!!!! */ 369 } __attribute__((aligned(sizeof(unsigned long)))); 370 371 #define to_scsi_target(d) container_of(d, struct scsi_target, dev) 372 static inline struct scsi_target *scsi_target(struct scsi_device *sdev) 373 { 374 return to_scsi_target(sdev->sdev_gendev.parent); 375 } 376 #define transport_class_to_starget(class_dev) \ 377 to_scsi_target(class_dev->parent) 378 379 #define starget_printk(prefix, starget, fmt, a...) \ 380 dev_printk(prefix, &(starget)->dev, fmt, ##a) 381 382 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *, 383 uint, uint, u64, void *hostdata); 384 extern int scsi_add_device(struct Scsi_Host *host, uint channel, 385 uint target, u64 lun); 386 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh); 387 extern void scsi_remove_device(struct scsi_device *); 388 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh); 389 void scsi_attach_vpd(struct scsi_device *sdev); 390 void scsi_cdl_check(struct scsi_device *sdev); 391 int scsi_cdl_enable(struct scsi_device *sdev, bool enable); 392 393 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q); 394 extern int __must_check scsi_device_get(struct scsi_device *); 395 extern void scsi_device_put(struct scsi_device *); 396 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *, 397 uint, uint, u64); 398 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *, 399 uint, uint, u64); 400 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *, 401 u64); 402 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *, 403 u64); 404 extern void starget_for_each_device(struct scsi_target *, void *, 405 void (*fn)(struct scsi_device *, void *)); 406 extern void __starget_for_each_device(struct scsi_target *, void *, 407 void (*fn)(struct scsi_device *, 408 void *)); 409 410 /* only exposed to implement shost_for_each_device */ 411 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, 412 struct scsi_device *); 413 414 /** 415 * shost_for_each_device - iterate over all devices of a host 416 * @sdev: the &struct scsi_device to use as a cursor 417 * @shost: the &struct scsi_host to iterate over 418 * 419 * Iterator that returns each device attached to @shost. This loop 420 * takes a reference on each device and releases it at the end. If 421 * you break out of the loop, you must call scsi_device_put(sdev). 422 */ 423 #define shost_for_each_device(sdev, shost) \ 424 for ((sdev) = __scsi_iterate_devices((shost), NULL); \ 425 (sdev); \ 426 (sdev) = __scsi_iterate_devices((shost), (sdev))) 427 428 /** 429 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED) 430 * @sdev: the &struct scsi_device to use as a cursor 431 * @shost: the &struct scsi_host to iterate over 432 * 433 * Iterator that returns each device attached to @shost. It does _not_ 434 * take a reference on the scsi_device, so the whole loop must be 435 * protected by shost->host_lock. 436 * 437 * Note: The only reason to use this is because you need to access the 438 * device list in interrupt context. Otherwise you really want to use 439 * shost_for_each_device instead. 440 */ 441 #define __shost_for_each_device(sdev, shost) \ 442 list_for_each_entry((sdev), &((shost)->__devices), siblings) 443 444 extern int scsi_change_queue_depth(struct scsi_device *, int); 445 extern int scsi_track_queue_full(struct scsi_device *, int); 446 447 extern int scsi_set_medium_removal(struct scsi_device *, char); 448 449 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, 450 int subpage, unsigned char *buffer, int len, int timeout, 451 int retries, struct scsi_mode_data *data, 452 struct scsi_sense_hdr *); 453 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, 454 unsigned char *buffer, int len, int timeout, 455 int retries, struct scsi_mode_data *data, 456 struct scsi_sense_hdr *); 457 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, 458 int retries, struct scsi_sense_hdr *sshdr); 459 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf, 460 int buf_len); 461 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, 462 unsigned int len, unsigned char opcode, 463 unsigned short sa); 464 extern int scsi_device_set_state(struct scsi_device *sdev, 465 enum scsi_device_state state); 466 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, 467 gfp_t gfpflags); 468 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt); 469 extern void sdev_evt_send_simple(struct scsi_device *sdev, 470 enum scsi_device_event evt_type, gfp_t gfpflags); 471 extern int scsi_device_quiesce(struct scsi_device *sdev); 472 extern void scsi_device_resume(struct scsi_device *sdev); 473 extern void scsi_target_quiesce(struct scsi_target *); 474 extern void scsi_target_resume(struct scsi_target *); 475 extern void scsi_scan_target(struct device *parent, unsigned int channel, 476 unsigned int id, u64 lun, 477 enum scsi_scan_mode rescan); 478 extern void scsi_target_reap(struct scsi_target *); 479 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev); 480 extern void scsi_target_unblock(struct device *, enum scsi_device_state); 481 extern void scsi_remove_target(struct device *); 482 extern const char *scsi_device_state_name(enum scsi_device_state); 483 extern int scsi_is_sdev_device(const struct device *); 484 extern int scsi_is_target_device(const struct device *); 485 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len); 486 487 /* Optional arguments to scsi_execute_cmd */ 488 struct scsi_exec_args { 489 unsigned char *sense; /* sense buffer */ 490 unsigned int sense_len; /* sense buffer len */ 491 struct scsi_sense_hdr *sshdr; /* decoded sense header */ 492 blk_mq_req_flags_t req_flags; /* BLK_MQ_REQ flags */ 493 int scmd_flags; /* SCMD flags */ 494 int *resid; /* residual length */ 495 }; 496 497 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd, 498 blk_opf_t opf, void *buffer, unsigned int bufflen, 499 int timeout, int retries, 500 const struct scsi_exec_args *args); 501 502 extern void sdev_disable_disk_events(struct scsi_device *sdev); 503 extern void sdev_enable_disk_events(struct scsi_device *sdev); 504 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t); 505 extern int scsi_vpd_tpg_id(struct scsi_device *, int *); 506 507 #ifdef CONFIG_PM 508 extern int scsi_autopm_get_device(struct scsi_device *); 509 extern void scsi_autopm_put_device(struct scsi_device *); 510 #else 511 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; } 512 static inline void scsi_autopm_put_device(struct scsi_device *d) {} 513 #endif /* CONFIG_PM */ 514 515 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev) 516 { 517 return device_reprobe(&sdev->sdev_gendev); 518 } 519 520 static inline unsigned int sdev_channel(struct scsi_device *sdev) 521 { 522 return sdev->channel; 523 } 524 525 static inline unsigned int sdev_id(struct scsi_device *sdev) 526 { 527 return sdev->id; 528 } 529 530 #define scmd_id(scmd) sdev_id((scmd)->device) 531 #define scmd_channel(scmd) sdev_channel((scmd)->device) 532 533 /* 534 * checks for positions of the SCSI state machine 535 */ 536 static inline int scsi_device_online(struct scsi_device *sdev) 537 { 538 return (sdev->sdev_state != SDEV_OFFLINE && 539 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE && 540 sdev->sdev_state != SDEV_DEL); 541 } 542 static inline int scsi_device_blocked(struct scsi_device *sdev) 543 { 544 return sdev->sdev_state == SDEV_BLOCK || 545 sdev->sdev_state == SDEV_CREATED_BLOCK; 546 } 547 static inline int scsi_device_created(struct scsi_device *sdev) 548 { 549 return sdev->sdev_state == SDEV_CREATED || 550 sdev->sdev_state == SDEV_CREATED_BLOCK; 551 } 552 553 int scsi_internal_device_block_nowait(struct scsi_device *sdev); 554 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev, 555 enum scsi_device_state new_state); 556 557 /* accessor functions for the SCSI parameters */ 558 static inline int scsi_device_sync(struct scsi_device *sdev) 559 { 560 return sdev->sdtr; 561 } 562 static inline int scsi_device_wide(struct scsi_device *sdev) 563 { 564 return sdev->wdtr; 565 } 566 static inline int scsi_device_dt(struct scsi_device *sdev) 567 { 568 return sdev->ppr; 569 } 570 static inline int scsi_device_dt_only(struct scsi_device *sdev) 571 { 572 if (sdev->inquiry_len < 57) 573 return 0; 574 return (sdev->inquiry[56] & 0x0c) == 0x04; 575 } 576 static inline int scsi_device_ius(struct scsi_device *sdev) 577 { 578 if (sdev->inquiry_len < 57) 579 return 0; 580 return sdev->inquiry[56] & 0x01; 581 } 582 static inline int scsi_device_qas(struct scsi_device *sdev) 583 { 584 if (sdev->inquiry_len < 57) 585 return 0; 586 return sdev->inquiry[56] & 0x02; 587 } 588 static inline int scsi_device_enclosure(struct scsi_device *sdev) 589 { 590 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1; 591 } 592 593 static inline int scsi_device_protection(struct scsi_device *sdev) 594 { 595 if (sdev->no_dif) 596 return 0; 597 598 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0); 599 } 600 601 static inline int scsi_device_tpgs(struct scsi_device *sdev) 602 { 603 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0; 604 } 605 606 /** 607 * scsi_device_supports_vpd - test if a device supports VPD pages 608 * @sdev: the &struct scsi_device to test 609 * 610 * If the 'try_vpd_pages' flag is set it takes precedence. 611 * Otherwise we will assume VPD pages are supported if the 612 * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set. 613 */ 614 static inline int scsi_device_supports_vpd(struct scsi_device *sdev) 615 { 616 /* Attempt VPD inquiry if the device blacklist explicitly calls 617 * for it. 618 */ 619 if (sdev->try_vpd_pages) 620 return 1; 621 /* 622 * Although VPD inquiries can go to SCSI-2 type devices, 623 * some USB ones crash on receiving them, and the pages 624 * we currently ask for are mandatory for SPC-2 and beyond 625 */ 626 if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages) 627 return 1; 628 return 0; 629 } 630 631 static inline int scsi_device_busy(struct scsi_device *sdev) 632 { 633 return sbitmap_weight(&sdev->budget_map); 634 } 635 636 #define MODULE_ALIAS_SCSI_DEVICE(type) \ 637 MODULE_ALIAS("scsi:t-" __stringify(type) "*") 638 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x" 639 640 #endif /* _SCSI_SCSI_DEVICE_H */ 641