1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_SCSI_CMND_H 3 #define _SCSI_SCSI_CMND_H 4 5 #include <linux/dma-mapping.h> 6 #include <linux/blkdev.h> 7 #include <linux/t10-pi.h> 8 #include <linux/list.h> 9 #include <linux/types.h> 10 #include <linux/timer.h> 11 #include <linux/scatterlist.h> 12 #include <scsi/scsi_device.h> 13 #include <scsi/scsi_host.h> 14 #include <scsi/scsi_request.h> 15 16 struct Scsi_Host; 17 struct scsi_driver; 18 19 /* 20 * MAX_COMMAND_SIZE is: 21 * The longest fixed-length SCSI CDB as per the SCSI standard. 22 * fixed-length means: commands that their size can be determined 23 * by their opcode and the CDB does not carry a length specifier, (unlike 24 * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly 25 * true and the SCSI standard also defines extended commands and 26 * vendor specific commands that can be bigger than 16 bytes. The kernel 27 * will support these using the same infrastructure used for VARLEN CDB's. 28 * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml 29 * supports without specifying a cmd_len by ULD's 30 */ 31 #define MAX_COMMAND_SIZE 16 32 #if (MAX_COMMAND_SIZE > BLK_MAX_CDB) 33 # error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB 34 #endif 35 36 struct scsi_data_buffer { 37 struct sg_table table; 38 unsigned length; 39 }; 40 41 /* embedded in scsi_cmnd */ 42 struct scsi_pointer { 43 char *ptr; /* data pointer */ 44 int this_residual; /* left in this buffer */ 45 struct scatterlist *buffer; /* which buffer */ 46 int buffers_residual; /* how many buffers left */ 47 48 dma_addr_t dma_handle; 49 50 volatile int Status; 51 volatile int Message; 52 volatile int have_data_in; 53 volatile int sent_command; 54 volatile int phase; 55 }; 56 57 /* for scmd->flags */ 58 #define SCMD_TAGGED (1 << 0) 59 #define SCMD_INITIALIZED (1 << 1) 60 #define SCMD_LAST (1 << 2) 61 /* flags preserved across unprep / reprep */ 62 #define SCMD_PRESERVED_FLAGS (SCMD_INITIALIZED) 63 64 /* for scmd->state */ 65 #define SCMD_STATE_COMPLETE 0 66 #define SCMD_STATE_INFLIGHT 1 67 68 struct scsi_cmnd { 69 struct scsi_request req; 70 struct scsi_device *device; 71 struct list_head eh_entry; /* entry for the host eh_cmd_q */ 72 struct delayed_work abort_work; 73 74 struct rcu_head rcu; 75 76 int eh_eflags; /* Used by error handlr */ 77 78 int budget_token; 79 80 /* 81 * This is set to jiffies as it was when the command was first 82 * allocated. It is used to time how long the command has 83 * been outstanding 84 */ 85 unsigned long jiffies_at_alloc; 86 87 int retries; 88 int allowed; 89 90 unsigned char prot_op; 91 unsigned char prot_type; 92 unsigned char prot_flags; 93 94 unsigned short cmd_len; 95 enum dma_data_direction sc_data_direction; 96 97 /* These elements define the operation we are about to perform */ 98 unsigned char *cmnd; 99 100 101 /* These elements define the operation we ultimately want to perform */ 102 struct scsi_data_buffer sdb; 103 struct scsi_data_buffer *prot_sdb; 104 105 unsigned underflow; /* Return error if less than 106 this amount is transferred */ 107 108 unsigned transfersize; /* How much we are guaranteed to 109 transfer with each SCSI transfer 110 (ie, between disconnect / 111 reconnects. Probably == sector 112 size */ 113 114 struct request *request; /* The command we are 115 working on */ 116 117 unsigned char *sense_buffer; 118 /* obtained by REQUEST SENSE when 119 * CHECK CONDITION is received on original 120 * command (auto-sense). Length must be 121 * SCSI_SENSE_BUFFERSIZE bytes. */ 122 123 /* Low-level done function - can be used by low-level driver to point 124 * to completion function. Not used by mid/upper level code. */ 125 void (*scsi_done) (struct scsi_cmnd *); 126 127 /* 128 * The following fields can be written to by the host specific code. 129 * Everything else should be left alone. 130 */ 131 struct scsi_pointer SCp; /* Scratchpad used by some host adapters */ 132 133 unsigned char *host_scribble; /* The host adapter is allowed to 134 * call scsi_malloc and get some memory 135 * and hang it here. The host adapter 136 * is also expected to call scsi_free 137 * to release this memory. (The memory 138 * obtained by scsi_malloc is guaranteed 139 * to be at an address < 16Mb). */ 140 141 int result; /* Status code from lower level driver */ 142 int flags; /* Command flags */ 143 unsigned long state; /* Command completion state */ 144 145 unsigned char tag; /* SCSI-II queued command tag */ 146 unsigned int extra_len; /* length of alignment and padding */ 147 }; 148 149 /* 150 * Return the driver private allocation behind the command. 151 * Only works if cmd_size is set in the host template. 152 */ 153 static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd) 154 { 155 return cmd + 1; 156 } 157 158 /* make sure not to use it with passthrough commands */ 159 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) 160 { 161 return *(struct scsi_driver **)cmd->request->rq_disk->private_data; 162 } 163 164 extern void scsi_finish_command(struct scsi_cmnd *cmd); 165 166 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, 167 size_t *offset, size_t *len); 168 extern void scsi_kunmap_atomic_sg(void *virt); 169 170 blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd); 171 void scsi_free_sgtables(struct scsi_cmnd *cmd); 172 173 #ifdef CONFIG_SCSI_DMA 174 extern int scsi_dma_map(struct scsi_cmnd *cmd); 175 extern void scsi_dma_unmap(struct scsi_cmnd *cmd); 176 #else /* !CONFIG_SCSI_DMA */ 177 static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; } 178 static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { } 179 #endif /* !CONFIG_SCSI_DMA */ 180 181 static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd) 182 { 183 return cmd->sdb.table.nents; 184 } 185 186 static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd) 187 { 188 return cmd->sdb.table.sgl; 189 } 190 191 static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd) 192 { 193 return cmd->sdb.length; 194 } 195 196 static inline void scsi_set_resid(struct scsi_cmnd *cmd, unsigned int resid) 197 { 198 cmd->req.resid_len = resid; 199 } 200 201 static inline unsigned int scsi_get_resid(struct scsi_cmnd *cmd) 202 { 203 return cmd->req.resid_len; 204 } 205 206 #define scsi_for_each_sg(cmd, sg, nseg, __i) \ 207 for_each_sg(scsi_sglist(cmd), sg, nseg, __i) 208 209 static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd, 210 void *buf, int buflen) 211 { 212 return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 213 buf, buflen); 214 } 215 216 static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd, 217 void *buf, int buflen) 218 { 219 return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 220 buf, buflen); 221 } 222 223 /* 224 * The operations below are hints that tell the controller driver how 225 * to handle I/Os with DIF or similar types of protection information. 226 */ 227 enum scsi_prot_operations { 228 /* Normal I/O */ 229 SCSI_PROT_NORMAL = 0, 230 231 /* OS-HBA: Protected, HBA-Target: Unprotected */ 232 SCSI_PROT_READ_INSERT, 233 SCSI_PROT_WRITE_STRIP, 234 235 /* OS-HBA: Unprotected, HBA-Target: Protected */ 236 SCSI_PROT_READ_STRIP, 237 SCSI_PROT_WRITE_INSERT, 238 239 /* OS-HBA: Protected, HBA-Target: Protected */ 240 SCSI_PROT_READ_PASS, 241 SCSI_PROT_WRITE_PASS, 242 }; 243 244 static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op) 245 { 246 scmd->prot_op = op; 247 } 248 249 static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd) 250 { 251 return scmd->prot_op; 252 } 253 254 enum scsi_prot_flags { 255 SCSI_PROT_TRANSFER_PI = 1 << 0, 256 SCSI_PROT_GUARD_CHECK = 1 << 1, 257 SCSI_PROT_REF_CHECK = 1 << 2, 258 SCSI_PROT_REF_INCREMENT = 1 << 3, 259 SCSI_PROT_IP_CHECKSUM = 1 << 4, 260 }; 261 262 /* 263 * The controller usually does not know anything about the target it 264 * is communicating with. However, when DIX is enabled the controller 265 * must be know target type so it can verify the protection 266 * information passed along with the I/O. 267 */ 268 enum scsi_prot_target_type { 269 SCSI_PROT_DIF_TYPE0 = 0, 270 SCSI_PROT_DIF_TYPE1, 271 SCSI_PROT_DIF_TYPE2, 272 SCSI_PROT_DIF_TYPE3, 273 }; 274 275 static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type) 276 { 277 scmd->prot_type = type; 278 } 279 280 static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd) 281 { 282 return scmd->prot_type; 283 } 284 285 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd) 286 { 287 return blk_rq_pos(scmd->request); 288 } 289 290 static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd) 291 { 292 return scmd->device->sector_size; 293 } 294 295 static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd) 296 { 297 return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0; 298 } 299 300 static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd) 301 { 302 return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL; 303 } 304 305 static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) 306 { 307 return cmd->prot_sdb; 308 } 309 310 #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ 311 for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) 312 313 static inline void set_status_byte(struct scsi_cmnd *cmd, char status) 314 { 315 cmd->result = (cmd->result & 0xffffff00) | status; 316 } 317 318 static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) 319 { 320 cmd->result = (cmd->result & 0xffff00ff) | (status << 8); 321 } 322 323 static inline void set_host_byte(struct scsi_cmnd *cmd, char status) 324 { 325 cmd->result = (cmd->result & 0xff00ffff) | (status << 16); 326 } 327 328 static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) 329 { 330 cmd->result = (cmd->result & 0x00ffffff) | (status << 24); 331 } 332 333 static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) 334 { 335 unsigned int xfer_len = scmd->sdb.length; 336 unsigned int prot_interval = scsi_prot_interval(scmd); 337 338 if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI) 339 xfer_len += (xfer_len >> ilog2(prot_interval)) * 8; 340 341 return xfer_len; 342 } 343 344 #endif /* _SCSI_SCSI_CMND_H */ 345