1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_SCSI_CMND_H 3 #define _SCSI_SCSI_CMND_H 4 5 #include <linux/dma-mapping.h> 6 #include <linux/blkdev.h> 7 #include <linux/t10-pi.h> 8 #include <linux/list.h> 9 #include <linux/types.h> 10 #include <linux/timer.h> 11 #include <linux/scatterlist.h> 12 #include <scsi/scsi_device.h> 13 #include <scsi/scsi_request.h> 14 15 struct Scsi_Host; 16 struct scsi_driver; 17 18 /* 19 * MAX_COMMAND_SIZE is: 20 * The longest fixed-length SCSI CDB as per the SCSI standard. 21 * fixed-length means: commands that their size can be determined 22 * by their opcode and the CDB does not carry a length specifier, (unlike 23 * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly 24 * true and the SCSI standard also defines extended commands and 25 * vendor specific commands that can be bigger than 16 bytes. The kernel 26 * will support these using the same infrastructure used for VARLEN CDB's. 27 * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml 28 * supports without specifying a cmd_len by ULD's 29 */ 30 #define MAX_COMMAND_SIZE 16 31 #if (MAX_COMMAND_SIZE > BLK_MAX_CDB) 32 # error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB 33 #endif 34 35 struct scsi_data_buffer { 36 struct sg_table table; 37 unsigned length; 38 }; 39 40 /* embedded in scsi_cmnd */ 41 struct scsi_pointer { 42 char *ptr; /* data pointer */ 43 int this_residual; /* left in this buffer */ 44 struct scatterlist *buffer; /* which buffer */ 45 int buffers_residual; /* how many buffers left */ 46 47 dma_addr_t dma_handle; 48 49 volatile int Status; 50 volatile int Message; 51 volatile int have_data_in; 52 volatile int sent_command; 53 volatile int phase; 54 }; 55 56 /* for scmd->flags */ 57 #define SCMD_TAGGED (1 << 0) 58 #define SCMD_UNCHECKED_ISA_DMA (1 << 1) 59 #define SCMD_INITIALIZED (1 << 2) 60 #define SCMD_LAST (1 << 3) 61 /* flags preserved across unprep / reprep */ 62 #define SCMD_PRESERVED_FLAGS (SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED) 63 64 /* for scmd->state */ 65 #define SCMD_STATE_COMPLETE 0 66 #define SCMD_STATE_INFLIGHT 1 67 68 struct scsi_cmnd { 69 struct scsi_request req; 70 struct scsi_device *device; 71 struct list_head list; /* scsi_cmnd participates in queue lists */ 72 struct list_head eh_entry; /* entry for the host eh_cmd_q */ 73 struct delayed_work abort_work; 74 75 struct rcu_head rcu; 76 77 int eh_eflags; /* Used by error handlr */ 78 79 /* 80 * This is set to jiffies as it was when the command was first 81 * allocated. It is used to time how long the command has 82 * been outstanding 83 */ 84 unsigned long jiffies_at_alloc; 85 86 int retries; 87 int allowed; 88 89 unsigned char prot_op; 90 unsigned char prot_type; 91 unsigned char prot_flags; 92 93 unsigned short cmd_len; 94 enum dma_data_direction sc_data_direction; 95 96 /* These elements define the operation we are about to perform */ 97 unsigned char *cmnd; 98 99 100 /* These elements define the operation we ultimately want to perform */ 101 struct scsi_data_buffer sdb; 102 struct scsi_data_buffer *prot_sdb; 103 104 unsigned underflow; /* Return error if less than 105 this amount is transferred */ 106 107 unsigned transfersize; /* How much we are guaranteed to 108 transfer with each SCSI transfer 109 (ie, between disconnect / 110 reconnects. Probably == sector 111 size */ 112 113 struct request *request; /* The command we are 114 working on */ 115 116 unsigned char *sense_buffer; 117 /* obtained by REQUEST SENSE when 118 * CHECK CONDITION is received on original 119 * command (auto-sense). Length must be 120 * SCSI_SENSE_BUFFERSIZE bytes. */ 121 122 /* Low-level done function - can be used by low-level driver to point 123 * to completion function. Not used by mid/upper level code. */ 124 void (*scsi_done) (struct scsi_cmnd *); 125 126 /* 127 * The following fields can be written to by the host specific code. 128 * Everything else should be left alone. 129 */ 130 struct scsi_pointer SCp; /* Scratchpad used by some host adapters */ 131 132 unsigned char *host_scribble; /* The host adapter is allowed to 133 * call scsi_malloc and get some memory 134 * and hang it here. The host adapter 135 * is also expected to call scsi_free 136 * to release this memory. (The memory 137 * obtained by scsi_malloc is guaranteed 138 * to be at an address < 16Mb). */ 139 140 int result; /* Status code from lower level driver */ 141 int flags; /* Command flags */ 142 unsigned long state; /* Command completion state */ 143 144 unsigned char tag; /* SCSI-II queued command tag */ 145 }; 146 147 /* 148 * Return the driver private allocation behind the command. 149 * Only works if cmd_size is set in the host template. 150 */ 151 static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd) 152 { 153 return cmd + 1; 154 } 155 156 /* make sure not to use it with passthrough commands */ 157 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) 158 { 159 return *(struct scsi_driver **)cmd->request->rq_disk->private_data; 160 } 161 162 extern void scsi_finish_command(struct scsi_cmnd *cmd); 163 164 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, 165 size_t *offset, size_t *len); 166 extern void scsi_kunmap_atomic_sg(void *virt); 167 168 extern blk_status_t scsi_init_io(struct scsi_cmnd *cmd); 169 170 #ifdef CONFIG_SCSI_DMA 171 extern int scsi_dma_map(struct scsi_cmnd *cmd); 172 extern void scsi_dma_unmap(struct scsi_cmnd *cmd); 173 #else /* !CONFIG_SCSI_DMA */ 174 static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; } 175 static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { } 176 #endif /* !CONFIG_SCSI_DMA */ 177 178 static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd) 179 { 180 return cmd->sdb.table.nents; 181 } 182 183 static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd) 184 { 185 return cmd->sdb.table.sgl; 186 } 187 188 static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd) 189 { 190 return cmd->sdb.length; 191 } 192 193 static inline void scsi_set_resid(struct scsi_cmnd *cmd, unsigned int resid) 194 { 195 cmd->req.resid_len = resid; 196 } 197 198 static inline unsigned int scsi_get_resid(struct scsi_cmnd *cmd) 199 { 200 return cmd->req.resid_len; 201 } 202 203 #define scsi_for_each_sg(cmd, sg, nseg, __i) \ 204 for_each_sg(scsi_sglist(cmd), sg, nseg, __i) 205 206 static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd, 207 void *buf, int buflen) 208 { 209 return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 210 buf, buflen); 211 } 212 213 static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd, 214 void *buf, int buflen) 215 { 216 return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 217 buf, buflen); 218 } 219 220 /* 221 * The operations below are hints that tell the controller driver how 222 * to handle I/Os with DIF or similar types of protection information. 223 */ 224 enum scsi_prot_operations { 225 /* Normal I/O */ 226 SCSI_PROT_NORMAL = 0, 227 228 /* OS-HBA: Protected, HBA-Target: Unprotected */ 229 SCSI_PROT_READ_INSERT, 230 SCSI_PROT_WRITE_STRIP, 231 232 /* OS-HBA: Unprotected, HBA-Target: Protected */ 233 SCSI_PROT_READ_STRIP, 234 SCSI_PROT_WRITE_INSERT, 235 236 /* OS-HBA: Protected, HBA-Target: Protected */ 237 SCSI_PROT_READ_PASS, 238 SCSI_PROT_WRITE_PASS, 239 }; 240 241 static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op) 242 { 243 scmd->prot_op = op; 244 } 245 246 static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd) 247 { 248 return scmd->prot_op; 249 } 250 251 enum scsi_prot_flags { 252 SCSI_PROT_TRANSFER_PI = 1 << 0, 253 SCSI_PROT_GUARD_CHECK = 1 << 1, 254 SCSI_PROT_REF_CHECK = 1 << 2, 255 SCSI_PROT_REF_INCREMENT = 1 << 3, 256 SCSI_PROT_IP_CHECKSUM = 1 << 4, 257 }; 258 259 /* 260 * The controller usually does not know anything about the target it 261 * is communicating with. However, when DIX is enabled the controller 262 * must be know target type so it can verify the protection 263 * information passed along with the I/O. 264 */ 265 enum scsi_prot_target_type { 266 SCSI_PROT_DIF_TYPE0 = 0, 267 SCSI_PROT_DIF_TYPE1, 268 SCSI_PROT_DIF_TYPE2, 269 SCSI_PROT_DIF_TYPE3, 270 }; 271 272 static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type) 273 { 274 scmd->prot_type = type; 275 } 276 277 static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd) 278 { 279 return scmd->prot_type; 280 } 281 282 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd) 283 { 284 return blk_rq_pos(scmd->request); 285 } 286 287 static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd) 288 { 289 return scmd->device->sector_size; 290 } 291 292 static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd) 293 { 294 return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0; 295 } 296 297 static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd) 298 { 299 return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL; 300 } 301 302 static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) 303 { 304 return cmd->prot_sdb; 305 } 306 307 #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ 308 for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) 309 310 static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) 311 { 312 cmd->result = (cmd->result & 0xffff00ff) | (status << 8); 313 } 314 315 static inline void set_host_byte(struct scsi_cmnd *cmd, char status) 316 { 317 cmd->result = (cmd->result & 0xff00ffff) | (status << 16); 318 } 319 320 static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) 321 { 322 cmd->result = (cmd->result & 0x00ffffff) | (status << 24); 323 } 324 325 static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) 326 { 327 unsigned int xfer_len = scmd->sdb.length; 328 unsigned int prot_interval = scsi_prot_interval(scmd); 329 330 if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI) 331 xfer_len += (xfer_len >> ilog2(prot_interval)) * 8; 332 333 return xfer_len; 334 } 335 336 #endif /* _SCSI_SCSI_CMND_H */ 337