1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _SCSI_SCSI_CMND_H 3 #define _SCSI_SCSI_CMND_H 4 5 #include <linux/dma-mapping.h> 6 #include <linux/blkdev.h> 7 #include <linux/t10-pi.h> 8 #include <linux/list.h> 9 #include <linux/types.h> 10 #include <linux/timer.h> 11 #include <linux/scatterlist.h> 12 #include <scsi/scsi_device.h> 13 #include <scsi/scsi_request.h> 14 15 struct Scsi_Host; 16 struct scsi_driver; 17 18 /* 19 * MAX_COMMAND_SIZE is: 20 * The longest fixed-length SCSI CDB as per the SCSI standard. 21 * fixed-length means: commands that their size can be determined 22 * by their opcode and the CDB does not carry a length specifier, (unlike 23 * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly 24 * true and the SCSI standard also defines extended commands and 25 * vendor specific commands that can be bigger than 16 bytes. The kernel 26 * will support these using the same infrastructure used for VARLEN CDB's. 27 * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml 28 * supports without specifying a cmd_len by ULD's 29 */ 30 #define MAX_COMMAND_SIZE 16 31 #if (MAX_COMMAND_SIZE > BLK_MAX_CDB) 32 # error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB 33 #endif 34 35 struct scsi_data_buffer { 36 struct sg_table table; 37 unsigned length; 38 }; 39 40 /* embedded in scsi_cmnd */ 41 struct scsi_pointer { 42 char *ptr; /* data pointer */ 43 int this_residual; /* left in this buffer */ 44 struct scatterlist *buffer; /* which buffer */ 45 int buffers_residual; /* how many buffers left */ 46 47 dma_addr_t dma_handle; 48 49 volatile int Status; 50 volatile int Message; 51 volatile int have_data_in; 52 volatile int sent_command; 53 volatile int phase; 54 }; 55 56 /* for scmd->flags */ 57 #define SCMD_TAGGED (1 << 0) 58 #define SCMD_INITIALIZED (1 << 1) 59 #define SCMD_LAST (1 << 2) 60 /* flags preserved across unprep / reprep */ 61 #define SCMD_PRESERVED_FLAGS (SCMD_INITIALIZED) 62 63 /* for scmd->state */ 64 #define SCMD_STATE_COMPLETE 0 65 #define SCMD_STATE_INFLIGHT 1 66 67 enum scsi_cmnd_submitter { 68 SUBMITTED_BY_BLOCK_LAYER = 0, 69 SUBMITTED_BY_SCSI_ERROR_HANDLER = 1, 70 SUBMITTED_BY_SCSI_RESET_IOCTL = 2, 71 } __packed; 72 73 struct scsi_cmnd { 74 struct scsi_request req; 75 struct scsi_device *device; 76 struct list_head eh_entry; /* entry for the host eh_cmd_q */ 77 struct delayed_work abort_work; 78 79 struct rcu_head rcu; 80 81 int eh_eflags; /* Used by error handlr */ 82 83 int budget_token; 84 85 /* 86 * This is set to jiffies as it was when the command was first 87 * allocated. It is used to time how long the command has 88 * been outstanding 89 */ 90 unsigned long jiffies_at_alloc; 91 92 int retries; 93 int allowed; 94 95 unsigned char prot_op; 96 unsigned char prot_type; 97 unsigned char prot_flags; 98 enum scsi_cmnd_submitter submitter; 99 100 unsigned short cmd_len; 101 enum dma_data_direction sc_data_direction; 102 103 /* These elements define the operation we are about to perform */ 104 unsigned char *cmnd; 105 106 107 /* These elements define the operation we ultimately want to perform */ 108 struct scsi_data_buffer sdb; 109 struct scsi_data_buffer *prot_sdb; 110 111 unsigned underflow; /* Return error if less than 112 this amount is transferred */ 113 114 unsigned transfersize; /* How much we are guaranteed to 115 transfer with each SCSI transfer 116 (ie, between disconnect / 117 reconnects. Probably == sector 118 size */ 119 120 unsigned char *sense_buffer; 121 /* obtained by REQUEST SENSE when 122 * CHECK CONDITION is received on original 123 * command (auto-sense). Length must be 124 * SCSI_SENSE_BUFFERSIZE bytes. */ 125 126 /* 127 * The following fields can be written to by the host specific code. 128 * Everything else should be left alone. 129 */ 130 struct scsi_pointer SCp; /* Scratchpad used by some host adapters */ 131 132 unsigned char *host_scribble; /* The host adapter is allowed to 133 * call scsi_malloc and get some memory 134 * and hang it here. The host adapter 135 * is also expected to call scsi_free 136 * to release this memory. (The memory 137 * obtained by scsi_malloc is guaranteed 138 * to be at an address < 16Mb). */ 139 140 int result; /* Status code from lower level driver */ 141 int flags; /* Command flags */ 142 unsigned long state; /* Command completion state */ 143 144 unsigned int extra_len; /* length of alignment and padding */ 145 }; 146 147 /* Variant of blk_mq_rq_from_pdu() that verifies the type of its argument. */ 148 static inline struct request *scsi_cmd_to_rq(struct scsi_cmnd *scmd) 149 { 150 return blk_mq_rq_from_pdu(scmd); 151 } 152 153 /* 154 * Return the driver private allocation behind the command. 155 * Only works if cmd_size is set in the host template. 156 */ 157 static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd) 158 { 159 return cmd + 1; 160 } 161 162 /* make sure not to use it with passthrough commands */ 163 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) 164 { 165 struct request *rq = scsi_cmd_to_rq(cmd); 166 167 return *(struct scsi_driver **)rq->rq_disk->private_data; 168 } 169 170 void scsi_done(struct scsi_cmnd *cmd); 171 172 extern void scsi_finish_command(struct scsi_cmnd *cmd); 173 174 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count, 175 size_t *offset, size_t *len); 176 extern void scsi_kunmap_atomic_sg(void *virt); 177 178 blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd); 179 void scsi_free_sgtables(struct scsi_cmnd *cmd); 180 181 #ifdef CONFIG_SCSI_DMA 182 extern int scsi_dma_map(struct scsi_cmnd *cmd); 183 extern void scsi_dma_unmap(struct scsi_cmnd *cmd); 184 #else /* !CONFIG_SCSI_DMA */ 185 static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; } 186 static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { } 187 #endif /* !CONFIG_SCSI_DMA */ 188 189 static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd) 190 { 191 return cmd->sdb.table.nents; 192 } 193 194 static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd) 195 { 196 return cmd->sdb.table.sgl; 197 } 198 199 static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd) 200 { 201 return cmd->sdb.length; 202 } 203 204 static inline void scsi_set_resid(struct scsi_cmnd *cmd, unsigned int resid) 205 { 206 cmd->req.resid_len = resid; 207 } 208 209 static inline unsigned int scsi_get_resid(struct scsi_cmnd *cmd) 210 { 211 return cmd->req.resid_len; 212 } 213 214 #define scsi_for_each_sg(cmd, sg, nseg, __i) \ 215 for_each_sg(scsi_sglist(cmd), sg, nseg, __i) 216 217 static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd, 218 void *buf, int buflen) 219 { 220 return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 221 buf, buflen); 222 } 223 224 static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd, 225 void *buf, int buflen) 226 { 227 return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 228 buf, buflen); 229 } 230 231 static inline sector_t scsi_get_sector(struct scsi_cmnd *scmd) 232 { 233 return blk_rq_pos(scsi_cmd_to_rq(scmd)); 234 } 235 236 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd) 237 { 238 unsigned int shift = ilog2(scmd->device->sector_size) - SECTOR_SHIFT; 239 240 return blk_rq_pos(scsi_cmd_to_rq(scmd)) >> shift; 241 } 242 243 static inline unsigned int scsi_logical_block_count(struct scsi_cmnd *scmd) 244 { 245 unsigned int shift = ilog2(scmd->device->sector_size) - SECTOR_SHIFT; 246 247 return blk_rq_bytes(scsi_cmd_to_rq(scmd)) >> shift; 248 } 249 250 /* 251 * The operations below are hints that tell the controller driver how 252 * to handle I/Os with DIF or similar types of protection information. 253 */ 254 enum scsi_prot_operations { 255 /* Normal I/O */ 256 SCSI_PROT_NORMAL = 0, 257 258 /* OS-HBA: Protected, HBA-Target: Unprotected */ 259 SCSI_PROT_READ_INSERT, 260 SCSI_PROT_WRITE_STRIP, 261 262 /* OS-HBA: Unprotected, HBA-Target: Protected */ 263 SCSI_PROT_READ_STRIP, 264 SCSI_PROT_WRITE_INSERT, 265 266 /* OS-HBA: Protected, HBA-Target: Protected */ 267 SCSI_PROT_READ_PASS, 268 SCSI_PROT_WRITE_PASS, 269 }; 270 271 static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op) 272 { 273 scmd->prot_op = op; 274 } 275 276 static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd) 277 { 278 return scmd->prot_op; 279 } 280 281 enum scsi_prot_flags { 282 SCSI_PROT_TRANSFER_PI = 1 << 0, 283 SCSI_PROT_GUARD_CHECK = 1 << 1, 284 SCSI_PROT_REF_CHECK = 1 << 2, 285 SCSI_PROT_REF_INCREMENT = 1 << 3, 286 SCSI_PROT_IP_CHECKSUM = 1 << 4, 287 }; 288 289 /* 290 * The controller usually does not know anything about the target it 291 * is communicating with. However, when DIX is enabled the controller 292 * must be know target type so it can verify the protection 293 * information passed along with the I/O. 294 */ 295 enum scsi_prot_target_type { 296 SCSI_PROT_DIF_TYPE0 = 0, 297 SCSI_PROT_DIF_TYPE1, 298 SCSI_PROT_DIF_TYPE2, 299 SCSI_PROT_DIF_TYPE3, 300 }; 301 302 static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type) 303 { 304 scmd->prot_type = type; 305 } 306 307 static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd) 308 { 309 return scmd->prot_type; 310 } 311 312 static inline u32 scsi_prot_ref_tag(struct scsi_cmnd *scmd) 313 { 314 struct request *rq = blk_mq_rq_from_pdu(scmd); 315 316 return t10_pi_ref_tag(rq); 317 } 318 319 static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd) 320 { 321 return scmd->device->sector_size; 322 } 323 324 static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd) 325 { 326 return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0; 327 } 328 329 static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd) 330 { 331 return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL; 332 } 333 334 static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) 335 { 336 return cmd->prot_sdb; 337 } 338 339 #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ 340 for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) 341 342 static inline void set_status_byte(struct scsi_cmnd *cmd, char status) 343 { 344 cmd->result = (cmd->result & 0xffffff00) | status; 345 } 346 347 static inline u8 get_status_byte(struct scsi_cmnd *cmd) 348 { 349 return cmd->result & 0xff; 350 } 351 352 static inline void set_host_byte(struct scsi_cmnd *cmd, char status) 353 { 354 cmd->result = (cmd->result & 0xff00ffff) | (status << 16); 355 } 356 357 static inline u8 get_host_byte(struct scsi_cmnd *cmd) 358 { 359 return (cmd->result >> 16) & 0xff; 360 } 361 362 /** 363 * scsi_msg_to_host_byte() - translate message byte 364 * 365 * Translate the SCSI parallel message byte to a matching 366 * host byte setting. A message of COMMAND_COMPLETE indicates 367 * a successful command execution, any other message indicate 368 * an error. As the messages themselves only have a meaning 369 * for the SCSI parallel protocol this function translates 370 * them into a matching host byte value for SCSI EH. 371 */ 372 static inline void scsi_msg_to_host_byte(struct scsi_cmnd *cmd, u8 msg) 373 { 374 switch (msg) { 375 case COMMAND_COMPLETE: 376 break; 377 case ABORT_TASK_SET: 378 set_host_byte(cmd, DID_ABORT); 379 break; 380 case TARGET_RESET: 381 set_host_byte(cmd, DID_RESET); 382 break; 383 default: 384 set_host_byte(cmd, DID_ERROR); 385 break; 386 } 387 } 388 389 static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) 390 { 391 unsigned int xfer_len = scmd->sdb.length; 392 unsigned int prot_interval = scsi_prot_interval(scmd); 393 394 if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI) 395 xfer_len += (xfer_len >> ilog2(prot_interval)) * 8; 396 397 return xfer_len; 398 } 399 400 extern void scsi_build_sense(struct scsi_cmnd *scmd, int desc, 401 u8 key, u8 asc, u8 ascq); 402 403 #endif /* _SCSI_SCSI_CMND_H */ 404