xref: /openbmc/linux/include/scsi/libsas.h (revision b8d312aa)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * SAS host prototypes and structures header file
4  *
5  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
6  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7  */
8 
9 #ifndef _LIBSAS_H_
10 #define _LIBSAS_H_
11 
12 
13 #include <linux/timer.h>
14 #include <linux/pci.h>
15 #include <scsi/sas.h>
16 #include <linux/libata.h>
17 #include <linux/list.h>
18 #include <scsi/scsi_device.h>
19 #include <scsi/scsi_cmnd.h>
20 #include <scsi/scsi_transport_sas.h>
21 #include <linux/scatterlist.h>
22 #include <linux/slab.h>
23 
24 struct block_device;
25 
26 enum sas_class {
27 	SAS,
28 	EXPANDER
29 };
30 
31 enum sas_phy_role {
32 	PHY_ROLE_NONE = 0,
33 	PHY_ROLE_TARGET = 0x40,
34 	PHY_ROLE_INITIATOR = 0x80,
35 };
36 
37 enum sas_phy_type {
38 	PHY_TYPE_PHYSICAL,
39 	PHY_TYPE_VIRTUAL
40 };
41 
42 /* The events are mnemonically described in sas_dump.c
43  * so when updating/adding events here, please also
44  * update the other file too.
45  */
46 enum port_event {
47 	PORTE_BYTES_DMAED     = 0U,
48 	PORTE_BROADCAST_RCVD,
49 	PORTE_LINK_RESET_ERR,
50 	PORTE_TIMER_EVENT,
51 	PORTE_HARD_RESET,
52 	PORT_NUM_EVENTS,
53 };
54 
55 enum phy_event {
56 	PHYE_LOSS_OF_SIGNAL   = 0U,
57 	PHYE_OOB_DONE,
58 	PHYE_OOB_ERROR,
59 	PHYE_SPINUP_HOLD,             /* hot plug SATA, no COMWAKE sent */
60 	PHYE_RESUME_TIMEOUT,
61 	PHYE_SHUTDOWN,
62 	PHY_NUM_EVENTS,
63 };
64 
65 enum discover_event {
66 	DISCE_DISCOVER_DOMAIN   = 0U,
67 	DISCE_REVALIDATE_DOMAIN,
68 	DISCE_SUSPEND,
69 	DISCE_RESUME,
70 	DISC_NUM_EVENTS,
71 };
72 
73 /* ---------- Expander Devices ---------- */
74 
75 #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
76 #define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
77 					 attr)
78 
79 enum routing_attribute {
80 	DIRECT_ROUTING,
81 	SUBTRACTIVE_ROUTING,
82 	TABLE_ROUTING,
83 };
84 
85 enum ex_phy_state {
86 	PHY_EMPTY,
87 	PHY_VACANT,
88 	PHY_NOT_PRESENT,
89 	PHY_DEVICE_DISCOVERED
90 };
91 
92 struct ex_phy {
93 	int    phy_id;
94 
95 	enum ex_phy_state phy_state;
96 
97 	enum sas_device_type attached_dev_type;
98 	enum sas_linkrate linkrate;
99 
100 	u8   attached_sata_host:1;
101 	u8   attached_sata_dev:1;
102 	u8   attached_sata_ps:1;
103 
104 	enum sas_protocol attached_tproto;
105 	enum sas_protocol attached_iproto;
106 
107 	u8   attached_sas_addr[SAS_ADDR_SIZE];
108 	u8   attached_phy_id;
109 
110 	int phy_change_count;
111 	enum routing_attribute routing_attr;
112 	u8   virtual:1;
113 
114 	int  last_da_index;
115 
116 	struct sas_phy *phy;
117 	struct sas_port *port;
118 };
119 
120 struct expander_device {
121 	struct list_head children;
122 
123 	int    ex_change_count;
124 	u16    max_route_indexes;
125 	u8     num_phys;
126 
127 	u8     t2t_supp:1;
128 	u8     configuring:1;
129 	u8     conf_route_table:1;
130 
131 	u8     enclosure_logical_id[8];
132 
133 	struct ex_phy *ex_phy;
134 	struct sas_port *parent_port;
135 
136 	struct mutex cmd_mutex;
137 };
138 
139 /* ---------- SATA device ---------- */
140 #define ATA_RESP_FIS_SIZE 24
141 
142 struct sata_device {
143 	unsigned int class;
144 	u8     port_no;        /* port number, if this is a PM (Port) */
145 
146 	struct ata_port *ap;
147 	struct ata_host *ata_host;
148 	struct smp_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */
149 	u8     fis[ATA_RESP_FIS_SIZE];
150 };
151 
152 struct ssp_device {
153 	struct list_head eh_list_node; /* pending a user requested eh action */
154 	struct scsi_lun reset_lun;
155 };
156 
157 enum {
158 	SAS_DEV_GONE,
159 	SAS_DEV_FOUND, /* device notified to lldd */
160 	SAS_DEV_DESTROY,
161 	SAS_DEV_EH_PENDING,
162 	SAS_DEV_LU_RESET,
163 	SAS_DEV_RESET,
164 };
165 
166 struct domain_device {
167 	spinlock_t done_lock;
168 	enum sas_device_type dev_type;
169 
170 	enum sas_linkrate linkrate;
171 	enum sas_linkrate min_linkrate;
172 	enum sas_linkrate max_linkrate;
173 
174 	int  pathways;
175 
176 	struct domain_device *parent;
177 	struct list_head siblings; /* devices on the same level */
178 	struct asd_sas_port *port;        /* shortcut to root of the tree */
179 	struct sas_phy *phy;
180 
181 	struct list_head dev_list_node;
182 	struct list_head disco_list_node; /* awaiting probe or destruct */
183 
184 	enum sas_protocol    iproto;
185 	enum sas_protocol    tproto;
186 
187 	struct sas_rphy *rphy;
188 
189 	u8  sas_addr[SAS_ADDR_SIZE];
190 	u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
191 
192 	u8  frame_rcvd[32];
193 
194 	union {
195 		struct expander_device ex_dev;
196 		struct sata_device     sata_dev; /* STP & directly attached */
197 		struct ssp_device      ssp_dev;
198 	};
199 
200 	void *lldd_dev;
201 	unsigned long state;
202 	struct kref kref;
203 };
204 
205 struct sas_work {
206 	struct list_head drain_node;
207 	struct work_struct work;
208 };
209 
210 static inline bool dev_is_expander(enum sas_device_type type)
211 {
212 	return type == SAS_EDGE_EXPANDER_DEVICE ||
213 	       type == SAS_FANOUT_EXPANDER_DEVICE;
214 }
215 
216 static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
217 {
218 	INIT_WORK(&sw->work, fn);
219 	INIT_LIST_HEAD(&sw->drain_node);
220 }
221 
222 struct sas_discovery_event {
223 	struct sas_work work;
224 	struct asd_sas_port *port;
225 };
226 
227 static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
228 {
229 	struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
230 
231 	return ev;
232 }
233 
234 struct sas_discovery {
235 	struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
236 	unsigned long    pending;
237 	u8     fanout_sas_addr[SAS_ADDR_SIZE];
238 	u8     eeds_a[SAS_ADDR_SIZE];
239 	u8     eeds_b[SAS_ADDR_SIZE];
240 	int    max_level;
241 };
242 
243 /* The port struct is Class:RW, driver:RO */
244 struct asd_sas_port {
245 /* private: */
246 	struct sas_discovery disc;
247 	struct domain_device *port_dev;
248 	spinlock_t dev_list_lock;
249 	struct list_head dev_list;
250 	struct list_head disco_list;
251 	struct list_head destroy_list;
252 	struct list_head sas_port_del_list;
253 	enum   sas_linkrate linkrate;
254 
255 	struct sas_work work;
256 	int suspended;
257 
258 /* public: */
259 	int id;
260 
261 	enum sas_class   class;
262 	u8               sas_addr[SAS_ADDR_SIZE];
263 	u8               attached_sas_addr[SAS_ADDR_SIZE];
264 	enum sas_protocol   iproto;
265 	enum sas_protocol   tproto;
266 
267 	enum sas_oob_mode oob_mode;
268 
269 	spinlock_t       phy_list_lock;
270 	struct list_head phy_list;
271 	int              num_phys;
272 	u32              phy_mask;
273 
274 	struct sas_ha_struct *ha;
275 
276 	struct sas_port	*port;
277 
278 	void *lldd_port;	  /* not touched by the sas class code */
279 };
280 
281 struct asd_sas_event {
282 	struct sas_work work;
283 	struct asd_sas_phy *phy;
284 	int event;
285 };
286 
287 static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
288 {
289 	struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
290 
291 	return ev;
292 }
293 
294 static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
295 		void (*fn)(struct work_struct *),
296 		struct asd_sas_phy *phy, int event)
297 {
298 	INIT_SAS_WORK(&ev->work, fn);
299 	ev->phy = phy;
300 	ev->event = event;
301 }
302 
303 #define SAS_PHY_SHUTDOWN_THRES   1024
304 
305 /* The phy pretty much is controlled by the LLDD.
306  * The class only reads those fields.
307  */
308 struct asd_sas_phy {
309 /* private: */
310 	atomic_t event_nr;
311 	int in_shutdown;
312 	int error;
313 	int suspended;
314 
315 	struct sas_phy *phy;
316 
317 /* public: */
318 	/* The following are class:RO, driver:R/W */
319 	int            enabled;	  /* must be set */
320 
321 	int            id;	  /* must be set */
322 	enum sas_class class;
323 	enum sas_protocol iproto;
324 	enum sas_protocol tproto;
325 
326 	enum sas_phy_type  type;
327 	enum sas_phy_role  role;
328 	enum sas_oob_mode  oob_mode;
329 	enum sas_linkrate linkrate;
330 
331 	u8   *sas_addr;		  /* must be set */
332 	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
333 
334 	spinlock_t     frame_rcvd_lock;
335 	u8             *frame_rcvd; /* must be set */
336 	int            frame_rcvd_size;
337 
338 	spinlock_t     sas_prim_lock;
339 	u32            sas_prim;
340 
341 	struct list_head port_phy_el; /* driver:RO */
342 	struct asd_sas_port      *port; /* Class:RW, driver: RO */
343 
344 	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
345 
346 	void *lldd_phy;		  /* not touched by the sas_class_code */
347 };
348 
349 struct scsi_core {
350 	struct Scsi_Host *shost;
351 
352 };
353 
354 enum sas_ha_state {
355 	SAS_HA_REGISTERED,
356 	SAS_HA_DRAINING,
357 	SAS_HA_ATA_EH_ACTIVE,
358 	SAS_HA_FROZEN,
359 };
360 
361 struct sas_ha_struct {
362 /* private: */
363 	struct list_head  defer_q; /* work queued while draining */
364 	struct mutex	  drain_mutex;
365 	unsigned long	  state;
366 	spinlock_t	  lock;
367 	int		  eh_active;
368 	wait_queue_head_t eh_wait_q;
369 	struct list_head  eh_dev_q;
370 
371 	struct mutex disco_mutex;
372 
373 	struct scsi_core core;
374 
375 /* public: */
376 	char *sas_ha_name;
377 	struct device *dev;	  /* should be set */
378 	struct module *lldd_module; /* should be set */
379 
380 	struct workqueue_struct *event_q;
381 	struct workqueue_struct *disco_q;
382 
383 	u8 *sas_addr;		  /* must be set */
384 	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
385 
386 	spinlock_t      phy_port_lock;
387 	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
388 	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
389 	int             num_phys; /* must be set, gt 0, static */
390 
391 	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
392 				* their siblings when forming wide ports */
393 
394 	/* LLDD calls these to notify the class of an event. */
395 	int (*notify_port_event)(struct asd_sas_phy *, enum port_event);
396 	int (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
397 
398 	void *lldd_ha;		  /* not touched by sas class code */
399 
400 	struct list_head eh_done_q;  /* complete via scsi_eh_flush_done_q */
401 	struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
402 
403 	int event_thres;
404 };
405 
406 #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
407 
408 static inline struct domain_device *
409 starget_to_domain_dev(struct scsi_target *starget) {
410 	return starget->hostdata;
411 }
412 
413 static inline struct domain_device *
414 sdev_to_domain_dev(struct scsi_device *sdev) {
415 	return starget_to_domain_dev(sdev->sdev_target);
416 }
417 
418 static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
419 {
420 	return &dev->sata_dev.ap->link.device[0];
421 }
422 
423 static inline struct domain_device *
424 cmd_to_domain_dev(struct scsi_cmnd *cmd)
425 {
426 	return sdev_to_domain_dev(cmd->device);
427 }
428 
429 void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
430 
431 /* Before calling a notify event, LLDD should use this function
432  * when the link is severed (possibly from its tasklet).
433  * The idea is that the Class only reads those, while the LLDD,
434  * can R/W these (thus avoiding a race).
435  */
436 static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
437 {
438 	phy->oob_mode = OOB_NOT_CONNECTED;
439 	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
440 }
441 
442 static inline unsigned int to_sas_gpio_od(int device, int bit)
443 {
444 	return 3 * device + bit;
445 }
446 
447 static inline void sas_put_local_phy(struct sas_phy *phy)
448 {
449 	put_device(&phy->dev);
450 }
451 
452 #ifdef CONFIG_SCSI_SAS_HOST_SMP
453 int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
454 #else
455 static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
456 {
457 	return -1;
458 }
459 #endif
460 
461 /* ---------- Tasks ---------- */
462 /*
463       service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
464   exec_status          |                     |                       |
465   ---------------------+---------------------+-----------------------+
466        SAM_...         |         X           |                       |
467        DEV_NO_RESPONSE |         X           |           X           |
468        INTERRUPTED     |         X           |                       |
469        QUEUE_FULL      |                     |           X           |
470        DEVICE_UNKNOWN  |                     |           X           |
471        SG_ERR          |                     |           X           |
472   ---------------------+---------------------+-----------------------+
473  */
474 
475 enum service_response {
476 	SAS_TASK_COMPLETE,
477 	SAS_TASK_UNDELIVERED = -1,
478 };
479 
480 enum exec_status {
481 	/* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
482 	 * them here to silence 'case value not in enumerated type' warnings
483 	 */
484 	__SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
485 
486 	SAS_DEV_NO_RESPONSE = 0x80,
487 	SAS_DATA_UNDERRUN,
488 	SAS_DATA_OVERRUN,
489 	SAS_INTERRUPTED,
490 	SAS_QUEUE_FULL,
491 	SAS_DEVICE_UNKNOWN,
492 	SAS_SG_ERR,
493 	SAS_OPEN_REJECT,
494 	SAS_OPEN_TO,
495 	SAS_PROTO_RESPONSE,
496 	SAS_PHY_DOWN,
497 	SAS_NAK_R_ERR,
498 	SAS_PENDING,
499 	SAS_ABORTED_TASK,
500 };
501 
502 /* When a task finishes with a response, the LLDD examines the
503  * response:
504  *	- For an ATA task task_status_struct::stat is set to
505  * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
506  * contents of struct ata_task_resp.
507  *	- For SSP tasks, if no data is present or status/TMF response
508  * is valid, task_status_struct::stat is set.  If data is present
509  * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
510  * task_status_struct::buf_valid_size, and task_status_struct::stat is
511  * set to SAM_CHECK_COND.
512  *
513  * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
514  * for ATA task.
515  *
516  * "frame_len" is the total frame length, which could be more or less
517  * than actually copied.
518  *
519  * Tasks ending with response, always set the residual field.
520  */
521 struct ata_task_resp {
522 	u16  frame_len;
523 	u8   ending_fis[ATA_RESP_FIS_SIZE];	  /* dev to host or data-in */
524 };
525 
526 #define SAS_STATUS_BUF_SIZE 96
527 
528 struct task_status_struct {
529 	enum service_response resp;
530 	enum exec_status      stat;
531 	int  buf_valid_size;
532 
533 	u8   buf[SAS_STATUS_BUF_SIZE];
534 
535 	u32  residual;
536 	enum sas_open_rej_reason open_rej_reason;
537 };
538 
539 /* ATA and ATAPI task queuable to a SAS LLDD.
540  */
541 struct sas_ata_task {
542 	struct host_to_dev_fis fis;
543 	u8     atapi_packet[16];  /* 0 if not ATAPI task */
544 
545 	u8     retry_count;	  /* hardware retry, should be > 0 */
546 
547 	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
548 	u8     use_ncq:1;
549 	u8     set_affil_pol:1;
550 	u8     stp_affil_pol:1;
551 
552 	u8     device_control_reg_update:1;
553 };
554 
555 struct sas_smp_task {
556 	struct scatterlist smp_req;
557 	struct scatterlist smp_resp;
558 };
559 
560 enum task_attribute {
561 	TASK_ATTR_SIMPLE = 0,
562 	TASK_ATTR_HOQ    = 1,
563 	TASK_ATTR_ORDERED= 2,
564 	TASK_ATTR_ACA    = 4,
565 };
566 
567 struct sas_ssp_task {
568 	u8     retry_count;	  /* hardware retry, should be > 0 */
569 
570 	u8     LUN[8];
571 	u8     enable_first_burst:1;
572 	enum   task_attribute task_attr;
573 	u8     task_prio;
574 	struct scsi_cmnd *cmd;
575 };
576 
577 struct sas_task {
578 	struct domain_device *dev;
579 
580 	spinlock_t   task_state_lock;
581 	unsigned     task_state_flags;
582 
583 	enum   sas_protocol      task_proto;
584 
585 	union {
586 		struct sas_ata_task ata_task;
587 		struct sas_smp_task smp_task;
588 		struct sas_ssp_task ssp_task;
589 	};
590 
591 	struct scatterlist *scatter;
592 	int    num_scatter;
593 	u32    total_xfer_len;
594 	u8     data_dir:2;	  /* Use PCI_DMA_... */
595 
596 	struct task_status_struct task_status;
597 	void   (*task_done)(struct sas_task *);
598 
599 	void   *lldd_task;	  /* for use by LLDDs */
600 	void   *uldd_task;
601 	struct sas_task_slow *slow_task;
602 };
603 
604 struct sas_task_slow {
605 	/* standard/extra infrastructure for slow path commands (SMP and
606 	 * internal lldd commands
607 	 */
608 	struct timer_list     timer;
609 	struct completion     completion;
610 	struct sas_task       *task;
611 };
612 
613 #define SAS_TASK_STATE_PENDING      1
614 #define SAS_TASK_STATE_DONE         2
615 #define SAS_TASK_STATE_ABORTED      4
616 #define SAS_TASK_NEED_DEV_RESET     8
617 #define SAS_TASK_AT_INITIATOR       16
618 
619 extern struct sas_task *sas_alloc_task(gfp_t flags);
620 extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
621 extern void sas_free_task(struct sas_task *task);
622 
623 struct sas_domain_function_template {
624 	/* The class calls these to notify the LLDD of an event. */
625 	void (*lldd_port_formed)(struct asd_sas_phy *);
626 	void (*lldd_port_deformed)(struct asd_sas_phy *);
627 
628 	/* The class calls these when a device is found or gone. */
629 	int  (*lldd_dev_found)(struct domain_device *);
630 	void (*lldd_dev_gone)(struct domain_device *);
631 
632 	int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
633 
634 	/* Task Management Functions. Must be called from process context. */
635 	int (*lldd_abort_task)(struct sas_task *);
636 	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
637 	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
638 	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
639 	int (*lldd_I_T_nexus_reset)(struct domain_device *);
640 	int (*lldd_ata_check_ready)(struct domain_device *);
641 	void (*lldd_ata_set_dmamode)(struct domain_device *);
642 	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
643 	int (*lldd_query_task)(struct sas_task *);
644 
645 	/* Port and Adapter management */
646 	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
647 	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
648 
649 	/* Phy management */
650 	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
651 
652 	/* GPIO support */
653 	int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
654 			       u8 reg_index, u8 reg_count, u8 *write_data);
655 };
656 
657 extern int sas_register_ha(struct sas_ha_struct *);
658 extern int sas_unregister_ha(struct sas_ha_struct *);
659 extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
660 extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
661 extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
662 
663 int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates);
664 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
665 extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
666 extern int sas_target_alloc(struct scsi_target *);
667 extern int sas_slave_configure(struct scsi_device *);
668 extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
669 extern int sas_bios_param(struct scsi_device *, struct block_device *,
670 			  sector_t capacity, int *hsc);
671 extern struct scsi_transport_template *
672 sas_domain_attach_transport(struct sas_domain_function_template *);
673 extern struct device_attribute dev_attr_phy_event_threshold;
674 
675 int  sas_discover_root_expander(struct domain_device *);
676 
677 void sas_init_ex_attr(void);
678 
679 int  sas_ex_revalidate_domain(struct domain_device *);
680 
681 void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
682 void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
683 int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
684 
685 int  sas_discover_sata(struct domain_device *);
686 int  sas_discover_end_dev(struct domain_device *);
687 
688 void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
689 
690 void sas_init_dev(struct domain_device *);
691 
692 void sas_task_abort(struct sas_task *);
693 int sas_eh_abort_handler(struct scsi_cmnd *cmd);
694 int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
695 int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
696 
697 extern void sas_target_destroy(struct scsi_target *);
698 extern int sas_slave_alloc(struct scsi_device *);
699 extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
700 		     void __user *arg);
701 extern int sas_drain_work(struct sas_ha_struct *ha);
702 
703 extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
704 				  struct ssp_response_iu *iu);
705 struct sas_phy *sas_get_local_phy(struct domain_device *dev);
706 
707 int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
708 
709 #endif /* _SASLIB_H_ */
710