1 /* 2 * Copyright(c) 2007 Intel Corporation. All rights reserved. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * You should have received a copy of the GNU General Public License along with 14 * this program; if not, write to the Free Software Foundation, Inc., 15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 16 * 17 * Maintained at www.Open-FCoE.org 18 */ 19 20 #ifndef _FC_FCP_H_ 21 #define _FC_FCP_H_ 22 23 #include <scsi/scsi.h> 24 25 /* 26 * Fibre Channel Protocol for SCSI. 27 * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005. 28 */ 29 30 /* 31 * fc/fs.h defines FC_TYPE_FCP. 32 */ 33 34 /* 35 * Service parameter page parameters (word 3 bits) for Process Login. 36 */ 37 #define FCP_SPPF_TASK_RETRY_ID 0x0200 /* task retry ID requested */ 38 #define FCP_SPPF_RETRY 0x0100 /* retry supported */ 39 #define FCP_SPPF_CONF_COMPL 0x0080 /* confirmed completion allowed */ 40 #define FCP_SPPF_OVLY_ALLOW 0x0040 /* data overlay allowed */ 41 #define FCP_SPPF_INIT_FCN 0x0020 /* initiator function */ 42 #define FCP_SPPF_TARG_FCN 0x0010 /* target function */ 43 #define FCP_SPPF_RD_XRDY_DIS 0x0002 /* disable XFER_RDY for reads */ 44 #define FCP_SPPF_WR_XRDY_DIS 0x0001 /* disable XFER_RDY for writes */ 45 46 /* 47 * FCP_CMND IU Payload. 48 */ 49 struct fcp_cmnd { 50 struct scsi_lun fc_lun; /* logical unit number */ 51 __u8 fc_cmdref; /* command reference number */ 52 __u8 fc_pri_ta; /* priority and task attribute */ 53 __u8 fc_tm_flags; /* task management flags */ 54 __u8 fc_flags; /* additional len & flags */ 55 __u8 fc_cdb[16]; /* base CDB */ 56 __be32 fc_dl; /* data length (must follow fc_cdb) */ 57 }; 58 59 #define FCP_CMND_LEN 32 /* expected length of structure */ 60 61 struct fcp_cmnd32 { 62 struct scsi_lun fc_lun; /* logical unit number */ 63 __u8 fc_cmdref; /* command reference number */ 64 __u8 fc_pri_ta; /* priority and task attribute */ 65 __u8 fc_tm_flags; /* task management flags */ 66 __u8 fc_flags; /* additional len & flags */ 67 __u8 fc_cdb[32]; /* base CDB */ 68 __be32 fc_dl; /* data length (must follow fc_cdb) */ 69 }; 70 71 #define FCP_CMND32_LEN 48 /* expected length of structure */ 72 #define FCP_CMND32_ADD_LEN (16 / 4) /* Additional cdb length */ 73 74 /* 75 * fc_pri_ta. 76 */ 77 #define FCP_PTA_SIMPLE 0 /* simple task attribute */ 78 #define FCP_PTA_HEADQ 1 /* head of queue task attribute */ 79 #define FCP_PTA_ORDERED 2 /* ordered task attribute */ 80 #define FCP_PTA_ACA 4 /* auto. contingent allegiance */ 81 #define FCP_PTA_MASK 7 /* mask for task attribute field */ 82 #define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */ 83 #define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */ 84 85 /* 86 * fc_tm_flags - task management flags field. 87 */ 88 #define FCP_TMF_CLR_ACA 0x40 /* clear ACA condition */ 89 #define FCP_TMF_TGT_RESET 0x20 /* target reset task management, 90 deprecated as of FCP-3 */ 91 #define FCP_TMF_LUN_RESET 0x10 /* logical unit reset task management */ 92 #define FCP_TMF_CLR_TASK_SET 0x04 /* clear task set */ 93 #define FCP_TMF_ABT_TASK_SET 0x02 /* abort task set */ 94 95 /* 96 * fc_flags. 97 * Bits 7:2 are the additional FCP_CDB length / 4. 98 */ 99 #define FCP_CFL_LEN_MASK 0xfc /* mask for additional length */ 100 #define FCP_CFL_LEN_SHIFT 2 /* shift bits for additional length */ 101 #define FCP_CFL_RDDATA 0x02 /* read data */ 102 #define FCP_CFL_WRDATA 0x01 /* write data */ 103 104 /* 105 * FCP_TXRDY IU - transfer ready payload. 106 */ 107 struct fcp_txrdy { 108 __be32 ft_data_ro; /* data relative offset */ 109 __be32 ft_burst_len; /* burst length */ 110 __u8 _ft_resvd[4]; /* reserved */ 111 }; 112 113 #define FCP_TXRDY_LEN 12 /* expected length of structure */ 114 115 /* 116 * FCP_RESP IU - response payload. 117 * 118 * The response payload comes in three parts: the flags/status, the 119 * sense/response lengths and the sense data/response info section. 120 * 121 * From FCP3r04, note 6 of section 9.5.13: 122 * 123 * Some early implementations presented the FCP_RSP IU without the FCP_RESID, 124 * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER, 125 * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This 126 * non-standard behavior should be tolerated. 127 * 128 * All response frames will always contain the fcp_resp template. Some 129 * will also include the fcp_resp_len template. 130 * 131 * From Table 23, the FCP_RSP_INFO can either be 4 bytes or 8 bytes, both 132 * are valid length. 133 */ 134 struct fcp_resp { 135 __u8 _fr_resvd[8]; /* reserved */ 136 __be16 fr_retry_delay; /* retry delay timer */ 137 __u8 fr_flags; /* flags */ 138 __u8 fr_status; /* SCSI status code */ 139 }; 140 141 #define FCP_RESP_LEN 12 /* expected length of structure */ 142 143 struct fcp_resp_ext { 144 __be32 fr_resid; /* Residual value */ 145 __be32 fr_sns_len; /* SCSI Sense length */ 146 __be32 fr_rsp_len; /* Response Info length */ 147 148 /* 149 * Optionally followed by RSP info and/or SNS info and/or 150 * bidirectional read residual length, if any. 151 */ 152 }; 153 154 #define FCP_RESP_EXT_LEN 12 /* expected length of the structure */ 155 156 struct fcp_resp_rsp_info { 157 __u8 _fr_resvd[3]; /* reserved */ 158 __u8 rsp_code; /* Response Info Code */ 159 __u8 _fr_resvd2[4]; /* reserved */ 160 }; 161 162 #define FCP_RESP_RSP_INFO_LEN4 4 /* without reserved field */ 163 #define FCP_RESP_RSP_INFO_LEN8 8 /* with reserved field */ 164 165 struct fcp_resp_with_ext { 166 struct fcp_resp resp; 167 struct fcp_resp_ext ext; 168 }; 169 170 #define FCP_RESP_WITH_EXT (FCP_RESP_LEN + FCP_RESP_EXT_LEN) 171 172 /* 173 * fr_flags. 174 */ 175 #define FCP_BIDI_RSP 0x80 /* bidirectional read response */ 176 #define FCP_BIDI_READ_UNDER 0x40 /* bidir. read less than requested */ 177 #define FCP_BIDI_READ_OVER 0x20 /* DL insufficient for full transfer */ 178 #define FCP_CONF_REQ 0x10 /* confirmation requested */ 179 #define FCP_RESID_UNDER 0x08 /* transfer shorter than expected */ 180 #define FCP_RESID_OVER 0x04 /* DL insufficient for full transfer */ 181 #define FCP_SNS_LEN_VAL 0x02 /* SNS_LEN field is valid */ 182 #define FCP_RSP_LEN_VAL 0x01 /* RSP_LEN field is valid */ 183 184 /* 185 * rsp_codes 186 */ 187 enum fcp_resp_rsp_codes { 188 FCP_TMF_CMPL = 0, 189 FCP_DATA_LEN_INVALID = 1, 190 FCP_CMND_FIELDS_INVALID = 2, 191 FCP_DATA_PARAM_MISMATCH = 3, 192 FCP_TMF_REJECTED = 4, 193 FCP_TMF_FAILED = 5, 194 FCP_TMF_INVALID_LUN = 9, 195 }; 196 197 /* 198 * FCP SRR Link Service request - Sequence Retransmission Request. 199 */ 200 struct fcp_srr { 201 __u8 srr_op; /* opcode ELS_SRR */ 202 __u8 srr_resvd[3]; /* opcode / reserved - must be zero */ 203 __be16 srr_ox_id; /* OX_ID of failed command */ 204 __be16 srr_rx_id; /* RX_ID of failed command */ 205 __be32 srr_rel_off; /* relative offset */ 206 __u8 srr_r_ctl; /* r_ctl for the information unit */ 207 __u8 srr_resvd2[3]; /* reserved */ 208 }; 209 210 /* 211 * Feature bits in name server FC-4 Features object. 212 */ 213 #define FCP_FEAT_TARG (1 << 0) /* target function supported */ 214 #define FCP_FEAT_INIT (1 << 1) /* initiator function supported */ 215 216 #endif /* _FC_FCP_H_ */ 217