xref: /openbmc/linux/include/scsi/fc/fc_fcp.h (revision 1ab142d4)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19 
20 #ifndef _FC_FCP_H_
21 #define	_FC_FCP_H_
22 
23 #include <scsi/scsi.h>
24 
25 /*
26  * Fibre Channel Protocol for SCSI.
27  * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
28  */
29 
30 /*
31  * fc/fs.h defines FC_TYPE_FCP.
32  */
33 
34 /*
35  * Service parameter page parameters (word 3 bits) for Process Login.
36  */
37 #define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
38 #define	FCP_SPPF_RETRY		0x0100	/* retry supported */
39 #define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
40 #define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
41 #define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
42 #define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
43 #define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
44 #define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */
45 
46 /*
47  * FCP_CMND IU Payload.
48  */
49 struct fcp_cmnd {
50 	struct scsi_lun	fc_lun;		/* logical unit number */
51 	__u8		fc_cmdref;	/* command reference number */
52 	__u8		fc_pri_ta;	/* priority and task attribute */
53 	__u8		fc_tm_flags;	/* task management flags */
54 	__u8		fc_flags;	/* additional len & flags */
55 	__u8		fc_cdb[16];	/* base CDB */
56 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
57 };
58 
59 #define	FCP_CMND_LEN	32	/* expected length of structure */
60 
61 struct fcp_cmnd32 {
62 	struct scsi_lun	fc_lun;		/* logical unit number */
63 	__u8		fc_cmdref;	/* command reference number */
64 	__u8		fc_pri_ta;	/* priority and task attribute */
65 	__u8		fc_tm_flags;	/* task management flags */
66 	__u8		fc_flags;	/* additional len & flags */
67 	__u8		fc_cdb[32];	/* base CDB */
68 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
69 };
70 
71 #define	FCP_CMND32_LEN	    48	/* expected length of structure */
72 #define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */
73 
74 /*
75  * fc_pri_ta.
76  */
77 #define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
78 #define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
79 #define	FCP_PTA_ORDERED     2	/* ordered task attribute */
80 #define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
81 #define	FCP_PTA_MASK	    7	/* mask for task attribute field */
82 #define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
83 #define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
84 
85 /*
86  * fc_tm_flags - task management flags field.
87  */
88 #define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
89 #define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
90 					   deprecated as of FCP-3 */
91 #define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
92 #define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
93 #define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */
94 
95 /*
96  * fc_flags.
97  *  Bits 7:2 are the additional FCP_CDB length / 4.
98  */
99 #define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
100 #define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
101 #define	FCP_CFL_RDDATA		0x02	/* read data */
102 #define	FCP_CFL_WRDATA		0x01	/* write data */
103 
104 /*
105  * FCP_TXRDY IU - transfer ready payload.
106  */
107 struct fcp_txrdy {
108 	__be32		ft_data_ro;	/* data relative offset */
109 	__be32		ft_burst_len;	/* burst length */
110 	__u8		_ft_resvd[4];	/* reserved */
111 };
112 
113 #define	FCP_TXRDY_LEN	12	/* expected length of structure */
114 
115 /*
116  * FCP_RESP IU - response payload.
117  *
118  * The response payload comes in three parts: the flags/status, the
119  * sense/response lengths and the sense data/response info section.
120  *
121  * From FCP3r04, note 6 of section 9.5.13:
122  *
123  * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
124  * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
125  * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
126  * non-standard behavior should be tolerated.
127  *
128  * All response frames will always contain the fcp_resp template.  Some
129  * will also include the fcp_resp_len template.
130  */
131 struct fcp_resp {
132 	__u8		_fr_resvd[8];	/* reserved */
133 	__be16		fr_retry_delay;	/* retry delay timer */
134 	__u8		fr_flags;	/* flags */
135 	__u8		fr_status;	/* SCSI status code */
136 };
137 
138 #define	FCP_RESP_LEN	12	/* expected length of structure */
139 
140 struct fcp_resp_ext {
141 	__be32		fr_resid;	/* Residual value */
142 	__be32		fr_sns_len;	/* SCSI Sense length */
143 	__be32		fr_rsp_len;	/* Response Info length */
144 
145 	/*
146 	 * Optionally followed by RSP info and/or SNS info and/or
147 	 * bidirectional read residual length, if any.
148 	 */
149 };
150 
151 #define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
152 
153 struct fcp_resp_rsp_info {
154     __u8      _fr_resvd[3];       /* reserved */
155     __u8      rsp_code;           /* Response Info Code */
156     __u8      _fr_resvd2[4];      /* reserved */
157 };
158 
159 struct fcp_resp_with_ext {
160 	struct fcp_resp resp;
161 	struct fcp_resp_ext ext;
162 };
163 
164 #define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
165 
166 /*
167  * fr_flags.
168  */
169 #define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
170 #define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
171 #define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
172 #define	FCP_CONF_REQ	    0x10	/* confirmation requested */
173 #define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
174 #define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
175 #define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
176 #define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */
177 
178 /*
179  * rsp_codes
180  */
181 enum fcp_resp_rsp_codes {
182 	FCP_TMF_CMPL = 0,
183 	FCP_DATA_LEN_INVALID = 1,
184 	FCP_CMND_FIELDS_INVALID = 2,
185 	FCP_DATA_PARAM_MISMATCH = 3,
186 	FCP_TMF_REJECTED = 4,
187 	FCP_TMF_FAILED = 5,
188 	FCP_TMF_INVALID_LUN = 9,
189 };
190 
191 /*
192  * FCP SRR Link Service request - Sequence Retransmission Request.
193  */
194 struct fcp_srr {
195 	__u8		srr_op;		/* opcode ELS_SRR */
196 	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
197 	__be16		srr_ox_id;	/* OX_ID of failed command */
198 	__be16		srr_rx_id;	/* RX_ID of failed command */
199 	__be32		srr_rel_off;	/* relative offset */
200 	__u8		srr_r_ctl;	/* r_ctl for the information unit */
201 	__u8		srr_resvd2[3];	/* reserved */
202 };
203 
204 /*
205  * Feature bits in name server FC-4 Features object.
206  */
207 #define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
208 #define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */
209 
210 #endif /* _FC_FCP_H_ */
211