xref: /openbmc/linux/include/scsi/fc/fc_fc2.h (revision 4f3db074)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19 
20 #ifndef _FC_FC2_H_
21 #define _FC_FC2_H_
22 
23 /*
24  * Fibre Channel Exchanges and Sequences.
25  */
26 #ifndef PACKED
27 #define PACKED  __attribute__ ((__packed__))
28 #endif /* PACKED */
29 
30 
31 /*
32  * Sequence Status Block.
33  * This format is set by the FC-FS standard and is sent over the wire.
34  * Note that the fields aren't all naturally aligned.
35  */
36 struct fc_ssb {
37 	__u8	ssb_seq_id;		/* sequence ID */
38 	__u8	_ssb_resvd;
39 	__be16	ssb_low_seq_cnt;	/* lowest SEQ_CNT */
40 
41 	__be16	ssb_high_seq_cnt;	/* highest SEQ_CNT */
42 	__be16	ssb_s_stat;		/* sequence status flags */
43 
44 	__be16	ssb_err_seq_cnt;	/* error SEQ_CNT */
45 	__u8	ssb_fh_cs_ctl;		/* frame header CS_CTL */
46 	__be16	ssb_fh_ox_id;		/* frame header OX_ID */
47 	__be16	ssb_rx_id;		/* responder's exchange ID */
48 	__u8	_ssb_resvd2[2];
49 } PACKED;
50 
51 /*
52  * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
53  * we define the size here so that code can ASSERT that the size comes out
54  * correct.
55  */
56 #define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
57 
58 /*
59  * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
60  */
61 #define SSB_ST_RESP         (1 << 15)   /* sequence responder */
62 #define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
63 #define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
64 
65 #define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
66 #define SSB_ST_REQ_CONT     (0 << 10)
67 #define SSB_ST_REQ_ABORT    (1 << 10)
68 #define SSB_ST_REQ_STOP     (2 << 10)
69 #define SSB_ST_REQ_RETRANS  (3 << 10)
70 
71 #define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
72 #define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
73 #define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
74 #define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
75 
76 #define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
77 #define SSB_ST_CLASS_MASK   3           /* class of service mask */
78 #define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
79 
80 /*
81  * Exchange Status Block.
82  * This format is set by the FC-FS standard and is sent over the wire.
83  * Note that the fields aren't all naturally aligned.
84  */
85 struct fc_esb {
86 	__u8	esb_cs_ctl;		/* CS_CTL for frame header */
87 	__be16	esb_ox_id;		/* originator exchange ID */
88 	__be16	esb_rx_id;		/* responder exchange ID */
89 	__be32	esb_orig_fid;		/* fabric ID of originator */
90 	__be32	esb_resp_fid;		/* fabric ID of responder */
91 	__be32	esb_e_stat;		/* status */
92 	__u8	_esb_resvd[4];
93 	__u8	esb_service_params[112]; /* TBD */
94 	__u8	esb_seq_status[8];	/* sequence statuses, 8 bytes each */
95 } __attribute__((packed));
96 
97 /*
98  * Define expected size for ASSERTs.
99  * See comments on FC_SSB_SIZE.
100  */
101 #define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
102 
103 /*
104  * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
105  */
106 #define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
107 #define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiative */
108 #define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
109 #define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
110 #define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
111 
112 #define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
113 #define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
114 #define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
115 #define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
116 #define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
117 #define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
118 
119 #define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
120 #define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
121 #define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
122 
123 #endif /* _FC_FC2_H_ */
124