1 /* 2 * ss.h 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 * 8 * The initial developer of the original code is David A. Hinds 9 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 10 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 11 * 12 * (C) 1999 David A. Hinds 13 */ 14 15 #ifndef _LINUX_SS_H 16 #define _LINUX_SS_H 17 18 #include <linux/device.h> 19 #include <linux/sched.h> /* task_struct, completion */ 20 #include <linux/mutex.h> 21 22 #ifdef CONFIG_CARDBUS 23 #include <linux/pci.h> 24 #endif 25 26 /* Definitions for card status flags for GetStatus */ 27 #define SS_WRPROT 0x0001 28 #define SS_CARDLOCK 0x0002 29 #define SS_EJECTION 0x0004 30 #define SS_INSERTION 0x0008 31 #define SS_BATDEAD 0x0010 32 #define SS_BATWARN 0x0020 33 #define SS_READY 0x0040 34 #define SS_DETECT 0x0080 35 #define SS_POWERON 0x0100 36 #define SS_GPI 0x0200 37 #define SS_STSCHG 0x0400 38 #define SS_CARDBUS 0x0800 39 #define SS_3VCARD 0x1000 40 #define SS_XVCARD 0x2000 41 #define SS_PENDING 0x4000 42 #define SS_ZVCARD 0x8000 43 44 /* InquireSocket capabilities */ 45 #define SS_CAP_PAGE_REGS 0x0001 46 #define SS_CAP_VIRTUAL_BUS 0x0002 47 #define SS_CAP_MEM_ALIGN 0x0004 48 #define SS_CAP_STATIC_MAP 0x0008 49 #define SS_CAP_PCCARD 0x4000 50 #define SS_CAP_CARDBUS 0x8000 51 52 /* for GetSocket, SetSocket */ 53 typedef struct socket_state_t { 54 u_int flags; 55 u_int csc_mask; 56 u_char Vcc, Vpp; 57 u_char io_irq; 58 } socket_state_t; 59 60 extern socket_state_t dead_socket; 61 62 /* Socket configuration flags */ 63 #define SS_PWR_AUTO 0x0010 64 #define SS_IOCARD 0x0020 65 #define SS_RESET 0x0040 66 #define SS_DMA_MODE 0x0080 67 #define SS_SPKR_ENA 0x0100 68 #define SS_OUTPUT_ENA 0x0200 69 70 /* Flags for I/O port and memory windows */ 71 #define MAP_ACTIVE 0x01 72 #define MAP_16BIT 0x02 73 #define MAP_AUTOSZ 0x04 74 #define MAP_0WS 0x08 75 #define MAP_WRPROT 0x10 76 #define MAP_ATTRIB 0x20 77 #define MAP_USE_WAIT 0x40 78 #define MAP_PREFETCH 0x80 79 80 /* Use this just for bridge windows */ 81 #define MAP_IOSPACE 0x20 82 83 /* power hook operations */ 84 #define HOOK_POWER_PRE 0x01 85 #define HOOK_POWER_POST 0x02 86 87 typedef struct pccard_io_map { 88 u_char map; 89 u_char flags; 90 u_short speed; 91 phys_addr_t start, stop; 92 } pccard_io_map; 93 94 typedef struct pccard_mem_map { 95 u_char map; 96 u_char flags; 97 u_short speed; 98 phys_addr_t static_start; 99 u_int card_start; 100 struct resource *res; 101 } pccard_mem_map; 102 103 typedef struct io_window_t { 104 u_int InUse, Config; 105 struct resource *res; 106 } io_window_t; 107 108 /* Maximum number of IO windows per socket */ 109 #define MAX_IO_WIN 2 110 111 /* Maximum number of memory windows per socket */ 112 #define MAX_WIN 4 113 114 115 /* 116 * Socket operations. 117 */ 118 struct pcmcia_socket; 119 struct pccard_resource_ops; 120 struct config_t; 121 struct pcmcia_callback; 122 struct user_info_t; 123 124 struct pccard_operations { 125 int (*init)(struct pcmcia_socket *s); 126 int (*suspend)(struct pcmcia_socket *s); 127 int (*get_status)(struct pcmcia_socket *s, u_int *value); 128 int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state); 129 int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io); 130 int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem); 131 }; 132 133 struct pcmcia_socket { 134 struct module *owner; 135 socket_state_t socket; 136 u_int state; 137 u_int suspended_state; /* state before suspend */ 138 u_short functions; 139 u_short lock_count; 140 pccard_mem_map cis_mem; 141 void __iomem *cis_virt; 142 io_window_t io[MAX_IO_WIN]; 143 pccard_mem_map win[MAX_WIN]; 144 struct list_head cis_cache; 145 size_t fake_cis_len; 146 u8 *fake_cis; 147 148 struct list_head socket_list; 149 struct completion socket_released; 150 151 /* deprecated */ 152 unsigned int sock; /* socket number */ 153 154 155 /* socket capabilities */ 156 u_int features; 157 u_int irq_mask; 158 u_int map_size; 159 u_int io_offset; 160 u_int pci_irq; 161 struct pci_dev *cb_dev; 162 163 /* socket setup is done so resources should be able to be allocated. 164 * Only if set to 1, calls to find_{io,mem}_region are handled, and 165 * insertio events are actually managed by the PCMCIA layer.*/ 166 u8 resource_setup_done; 167 168 /* socket operations */ 169 struct pccard_operations *ops; 170 struct pccard_resource_ops *resource_ops; 171 void *resource_data; 172 173 /* Zoom video behaviour is so chip specific its not worth adding 174 this to _ops */ 175 void (*zoom_video)(struct pcmcia_socket *, 176 int); 177 178 /* so is power hook */ 179 int (*power_hook)(struct pcmcia_socket *sock, int operation); 180 181 /* allows tuning the CB bridge before loading driver for the CB card */ 182 #ifdef CONFIG_CARDBUS 183 void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus); 184 #endif 185 186 /* state thread */ 187 struct task_struct *thread; 188 struct completion thread_done; 189 unsigned int thread_events; 190 unsigned int sysfs_events; 191 192 /* For the non-trivial interaction between these locks, 193 * see Documentation/pcmcia/locking.txt */ 194 struct mutex skt_mutex; 195 struct mutex ops_mutex; 196 197 /* protects thread_events and sysfs_events */ 198 spinlock_t thread_lock; 199 200 /* pcmcia (16-bit) */ 201 struct pcmcia_callback *callback; 202 203 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) 204 /* The following elements refer to 16-bit PCMCIA devices inserted 205 * into the socket */ 206 struct list_head devices_list; 207 208 /* the number of devices, used only internally and subject to 209 * incorrectness and change */ 210 u8 device_count; 211 212 /* does the PCMCIA card consist of two pseudo devices? */ 213 u8 pcmcia_pfc; 214 215 /* non-zero if PCMCIA card is present */ 216 atomic_t present; 217 218 /* IRQ to be used by PCMCIA devices. May not be IRQ 0. */ 219 unsigned int pcmcia_irq; 220 221 #endif /* CONFIG_PCMCIA */ 222 223 /* socket device */ 224 struct device dev; 225 /* data internal to the socket driver */ 226 void *driver_data; 227 /* status of the card during resume from a system sleep state */ 228 int resume_status; 229 }; 230 231 232 /* socket drivers must define the resource operations type they use. There 233 * are three options: 234 * - pccard_static_ops iomem and ioport areas are assigned statically 235 * - pccard_iodyn_ops iomem areas is assigned statically, ioport 236 * areas dynamically 237 * If this option is selected, use 238 * "select PCCARD_IODYN" in Kconfig. 239 * - pccard_nonstatic_ops iomem and ioport areas are assigned dynamically. 240 * If this option is selected, use 241 * "select PCCARD_NONSTATIC" in Kconfig. 242 * 243 */ 244 extern struct pccard_resource_ops pccard_static_ops; 245 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) 246 extern struct pccard_resource_ops pccard_iodyn_ops; 247 extern struct pccard_resource_ops pccard_nonstatic_ops; 248 #else 249 /* If PCMCIA is not used, but only CARDBUS, these functions are not used 250 * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module 251 */ 252 #define pccard_iodyn_ops pccard_static_ops 253 #define pccard_nonstatic_ops pccard_static_ops 254 #endif 255 256 257 /* socket drivers use this callback in their IRQ handler */ 258 extern void pcmcia_parse_events(struct pcmcia_socket *socket, 259 unsigned int events); 260 261 /* to register and unregister a socket */ 262 extern int pcmcia_register_socket(struct pcmcia_socket *socket); 263 extern void pcmcia_unregister_socket(struct pcmcia_socket *socket); 264 265 266 #endif /* _LINUX_SS_H */ 267